diff options
| author | Dongming Han <handongming@gl-inet.com> | 2020-07-22 15:12:17 +0800 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-12-25 10:38:13 +0100 |
| commit | b9389186b012e5bd99ea6523b8220aaee6ca0085 (patch) | |
| tree | dbd3f2cbff4b01a787e1f55cc7bbddd7c3ae83dd /target/linux/ipq40xx/image/Makefile | |
| parent | 3bb16185737c011b74e3166cf436785604b5f47f (diff) | |
| download | upstream-b9389186b012e5bd99ea6523b8220aaee6ca0085.tar.gz upstream-b9389186b012e5bd99ea6523b8220aaee6ca0085.tar.bz2 upstream-b9389186b012e5bd99ea6523b8220aaee6ca0085.zip | |
ipq40xx: add support for GL.iNet GL-AP1300
Specifications:
SOC: Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core
RAM: 256 MiB
FLASH1: 4 MiB NOR
FLASH2: 128 MiB NAND
ETH: Qualcomm QCA8075
WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2
WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2
INPUT: Reset
LED: Power, Internet
UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1
OTHER: On board with BLE module - by cp210x USB serial chip
On board hareware watchdog with GPIO0 high to turn on, and GPIO4 for watchdog feed
Install via uboot tftp or uboot web failsafe.
By uboot tftp:
(IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-factory.ubi
(IPQ40xx) # run lf
By uboot web failsafe:
Push the reset button for 10 seconds util the power led flash faster,
then use broswer to access http://192.168.1.1
Afterwards upgrade can use sysupgrade image.
Signed-off-by: Dongming Han <handongming@gl-inet.com>
Diffstat (limited to 'target/linux/ipq40xx/image/Makefile')
| -rw-r--r-- | target/linux/ipq40xx/image/Makefile | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 487f3b5638..c19dcb4039 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -482,6 +482,21 @@ define Device/ezviz_cs-w3-wd1200g-eup endef TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup +define Device/glinet_gl-ap1300 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-AP1300 + SOC := qcom-ipq4018 + DEVICE_DTS_CONFIG := config@ap.dk01.1-c2 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 131072k + KERNEL_INSTALL := 1 + DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 +endef +TARGET_DEVICES += glinet_gl-ap1300 + define Device/glinet_gl-b1300 $(call Device/FitImage) DEVICE_VENDOR := GL.iNet |