diff options
| author | Tomasz Maciej Nowak <tmn505@gmail.com> | 2021-05-25 15:26:06 +0200 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2021-06-06 00:26:13 +0200 |
| commit | 1984a6bbcaac95c439dd4a6eba2f78c54e9be215 (patch) | |
| tree | 1d774dee3d55ea73b06f48f5e618129c2c6738a1 /target/linux/ipq40xx/Makefile | |
| parent | 609aa3978393d7436e5c9caba89d3356af021c80 (diff) | |
| download | upstream-1984a6bbcaac95c439dd4a6eba2f78c54e9be215.tar.gz upstream-1984a6bbcaac95c439dd4a6eba2f78c54e9be215.tar.bz2 upstream-1984a6bbcaac95c439dd4a6eba2f78c54e9be215.zip | |
ipq40xx: add uboot-envtools to default packages
When support for Luma WRTQ-329ACN was added, the instructions for
flashing this device include using tools from uboot-envtools package.
Unfortunately the OpenWrt buildroot system omits packages from
DEVICE_PACKAGES when CONFIG_TARGET_MULTI_PROFILE,
CONFIG_TARGET_PER_DEVICE_ROOTFS, CONFIG_TARGET_ALL_PROFILES are set. In
result the official images are without tools mentioned in the
instruction. The workoround for the fashing would be installing
uboot-envtools when booted with initramfs image, but not always the
access to internet is available. The other method would be to issue the
necesary command in U-Boot environment but some serial terminals default
configuration don't work well with pasting lines longer than 80 chars.
Therefore add uboot-envtools to default packages, which adds really
small flash footprint to rootfs, where increased size usually is not an
issue.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Diffstat (limited to 'target/linux/ipq40xx/Makefile')
| -rw-r--r-- | target/linux/ipq40xx/Makefile | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ipq40xx/Makefile b/target/linux/ipq40xx/Makefile index 43b1fcb0f9..400612376c 100644 --- a/target/linux/ipq40xx/Makefile +++ b/target/linux/ipq40xx/Makefile @@ -18,6 +18,7 @@ DEFAULT_PACKAGES += \ kmod-usb-dwc3-qcom \ kmod-leds-gpio kmod-gpio-button-hotplug swconfig \ kmod-ath10k-ct wpad-basic-wolfssl \ - kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct + kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct \ + uboot-envtools $(eval $(call BuildTarget)) |