kernel: bump to 4.9.105

Refresh patches.

Drop patches that have been upstreamed:
target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
target/linux/generic/backport-4.9/095-v4.12-ipv6-Need-to-export-ipv6_push_frag_opts-for-tunnelin.patch
target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch
target/linux/generic/pending-4.9/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch
target/linux/generic/pending-4.9/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch

Compile & run tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

1 files changed, 0 insertions, 70 deletions

diff --git a/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch
deleted file mode 100644
index f2d5df503f..0000000000
--- a/target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: phy: at803x: add support for AT8032
-
-Like AT8030, this PHY needs the GPIO reset workaround
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -62,6 +62,7 @@
- 
- #define ATH8030_PHY_ID 0x004dd076
- #define ATH8031_PHY_ID 0x004dd074
-+#define ATH8032_PHY_ID 0x004dd023
- #define ATH8035_PHY_ID 0x004dd072
- 
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
-@@ -259,7 +260,8 @@ static int at803x_probe(struct phy_devic
- 	if (!priv)
- 		return -ENOMEM;
- 
--	if (phydev->drv->phy_id != ATH8030_PHY_ID)
-+	if (phydev->drv->phy_id != ATH8030_PHY_ID &&
-+	    phydev->drv->phy_id != ATH8032_PHY_ID)
- 		goto does_not_require_reset_workaround;
- 
- 	gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-@@ -335,7 +337,7 @@ static void at803x_link_change_notify(st
- 	struct at803x_priv *priv = phydev->priv;
- 
- 	/*
--	 * Conduct a hardware reset for AT8030 every time a link loss is
-+	 * Conduct a hardware reset for AT8030/2 every time a link loss is
- 	 * signalled. This is necessary to circumvent a hardware bug that
- 	 * occurs when the cable is unplugged while TX packets are pending
- 	 * in the FIFO. In such cases, the FIFO enters an error mode it
-@@ -447,6 +449,24 @@ static struct phy_driver at803x_driver[]
- 	.aneg_done		= at803x_aneg_done,
- 	.ack_interrupt		= &at803x_ack_interrupt,
- 	.config_intr		= &at803x_config_intr,
-+}, {
-+	/* ATHEROS 8032 */
-+	.phy_id			= ATH8032_PHY_ID,
-+	.name			= "Atheros 8032 ethernet",
-+	.phy_id_mask		= 0xffffffef,
-+	.probe			= at803x_probe,
-+	.config_init		= at803x_config_init,
-+	.link_change_notify	= at803x_link_change_notify,
-+	.set_wol		= at803x_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	.features		= PHY_BASIC_FEATURES,
-+	.flags			= PHY_HAS_INTERRUPT,
-+	.config_aneg		= genphy_config_aneg,
-+	.read_status		= genphy_read_status,
-+	.ack_interrupt		= at803x_ack_interrupt,
-+	.config_intr		= at803x_config_intr,
- } };
- 
- module_phy_driver(at803x_driver);
-@@ -454,6 +474,7 @@ module_phy_driver(at803x_driver);
- static struct mdio_device_id __maybe_unused atheros_tbl[] = {
- 	{ ATH8030_PHY_ID, 0xffffffef },
- 	{ ATH8031_PHY_ID, 0xffffffef },
-+	{ ATH8032_PHY_ID, 0xffffffef },
- 	{ ATH8035_PHY_ID, 0xffffffef },
- 	{ }
- };