mac80211: switch to upstream owl-loader driver

The Owl Loader (named after the codename that Atheros gave
these devices back in the day) has been accepted upstream.

This patch removes the "misc" driver OpenWrt had and adds
the remaining differences against the version that ships
with 5.4-rc1 into a separate "120-owl-loader-compat.patch"
file that can be cut down once AR71XX is being dealt with.

Note: I decided to keep the existing (kmod-)owl-loader
package name around for now. The kernel module file in
the kmod package will be called ath9k_pci_owl_loader.ko
though.

Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

1 files changed, 0 insertions, 246 deletions

diff --git a/target/linux/generic/files/drivers/misc/owl-loader.c b/target/linux/generic/files/drivers/misc/owl-loader.c
deleted file mode 100644
index a4e55ad7b1..0000000000
--- a/target/linux/generic/files/drivers/misc/owl-loader.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Initialize Owl Emulation Devices
- *
- * Copyright (C) 2016 Christian Lamparter <chunkeey@googlemail.com>
- * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
- * need to be able to initialize the PCIe wifi device. Normally, this is done
- * during the early stages of booting linux, because the necessary init code
- * is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup.
- * However,this isn't possible for devices which have the init code for the
- * Atheros chip stored on NAND. Hence, this module can be used to initialze
- * the chip when the user-space is ready to extract the init code.
- */
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/completion.h>
-#include <linux/etherdevice.h>
-#include <linux/firmware.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-struct owl_ctx {
-	struct completion eeprom_load;
-};
-
-#define EEPROM_FILENAME_LEN 100
-
-#define AR5416_EEPROM_MAGIC 0xa55a
-
-static int ath9k_pci_fixup(struct pci_dev *pdev, const u16 *cal_data,
-			   size_t cal_len)
-{
-	void __iomem *mem;
-	const void *cal_end = (void *)cal_data + cal_len;
-	const struct {
-		u16 reg;
-		u16 low_val;
-		u16 high_val;
-	} __packed *data;
-	u16 cmd;
-	u32 bar0;
-	bool swap_needed = false;
-
-	if (*cal_data != AR5416_EEPROM_MAGIC) {
-		if (*cal_data != swab16(AR5416_EEPROM_MAGIC)) {
-			dev_err(&pdev->dev, "invalid calibration data\n");
-			return -EINVAL;
-		}
-
-		dev_dbg(&pdev->dev, "calibration data needs swapping\n");
-		swap_needed = true;
-	}
-
-	dev_info(&pdev->dev, "fixup device configuration\n");
-
-	mem = pcim_iomap(pdev, 0, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "ioremap error\n");
-		return -EINVAL;
-	}
-
-	pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &bar0);
-	pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0,
-			       pci_resource_start(pdev, 0));
-	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_write_config_word(pdev, PCI_COMMAND, cmd);
-
-	/* set pointer to first reg address */
-	for (data = (const void *) (cal_data + 3);
-	     (const void *) data <= cal_end && data->reg != (u16)~0;
-	     data++) {
-		u32 val;
-		u16 reg;
-
-		reg = data->reg;
-		val = data->low_val;
-		val |= ((u32)data->high_val) << 16;
-
-		if (swap_needed) {
-			reg = swab16(reg);
-			val = swahb32(val);
-		}
-
-#ifdef CONFIG_LANTIQ
-		val = swab32(val);
-#endif
-
-		__raw_writel(val, mem + reg);
-		udelay(100);
-	}
-
-	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-	pci_write_config_word(pdev, PCI_COMMAND, cmd);
-
-	pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, bar0);
-	pcim_iounmap(pdev, mem);
-
-	pci_disable_device(pdev);
-
-	return 0;
-}
-
-static void owl_fw_cb(const struct firmware *fw, void *context)
-{
-	struct pci_dev *pdev = (struct pci_dev *) context;
-	struct owl_ctx *ctx = (struct owl_ctx *) pci_get_drvdata(pdev);
-	struct ath9k_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct pci_bus *bus;
-
-	complete(&ctx->eeprom_load);
-
-	if (!fw) {
-		dev_err(&pdev->dev, "no eeprom data received.\n");
-		goto release;
-	}
-
-	/* also note that we are doing *u16 operations on the file */
-	if (fw->size > sizeof(pdata->eeprom_data) || fw->size < 0x200 ||
-	    (fw->size & 1) == 1) {
-		dev_err(&pdev->dev, "eeprom file has an invalid size.\n");
-		goto release;
-	}
-
-	if (pdata) {
-		memcpy(pdata->eeprom_data, fw->data, fw->size);
-
-		/*
-		 * eeprom has been successfully loaded - pass the data to ath9k
-		 * but remove the eeprom_name, so it doesn't try to load it too.
-		 */
-		pdata->eeprom_name = NULL;
-	}
-
-	if (ath9k_pci_fixup(pdev, (const u16 *) fw->data, fw->size))
-		goto release;
-
-	pci_lock_rescan_remove();
-	bus = pdev->bus;
-	pci_stop_and_remove_bus_device(pdev);
-	/*
-	 * the device should come back with the proper
-	 * ProductId. But we have to initiate a rescan.
-	 */
-	pci_rescan_bus(bus);
-	pci_unlock_rescan_remove();
-
-release:
-	release_firmware(fw);
-}
-
-static const char *owl_get_eeprom_name(struct pci_dev *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct ath9k_platform_data *pdata;
-	char *eeprom_name;
-
-	/* try the existing platform data first */
-	pdata = dev_get_platdata(dev);
-	if (pdata && pdata->eeprom_name)
-		return pdata->eeprom_name;
-
-	dev_dbg(dev, "using auto-generated eeprom filename\n");
-
-	eeprom_name = devm_kzalloc(dev, EEPROM_FILENAME_LEN, GFP_KERNEL);
-	if (!eeprom_name)
-		return NULL;
-
-	/* this should match the pattern used in ath9k/init.c */
-	scnprintf(eeprom_name, EEPROM_FILENAME_LEN, "ath9k-eeprom-pci-%s.bin",
-		  dev_name(dev));
-
-	return eeprom_name;
-}
-
-static int owl_probe(struct pci_dev *pdev,
-		    const struct pci_device_id *id)
-{
-	struct owl_ctx *ctx;
-	const char *eeprom_name;
-	int err = 0;
-
-	if (pcim_enable_device(pdev))
-		return -EIO;
-
-	pcim_pin_device(pdev);
-
-	eeprom_name = owl_get_eeprom_name(pdev);
-	if (!eeprom_name) {
-		dev_err(&pdev->dev, "no eeprom filename found.\n");
-		return -ENODEV;
-	}
-
-	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
-	if (!ctx) {
-		dev_err(&pdev->dev, "failed to alloc device context.\n");
-		return -ENOMEM;
-	}
-	init_completion(&ctx->eeprom_load);
-
-	pci_set_drvdata(pdev, ctx);
-	err = request_firmware_nowait(THIS_MODULE, true, eeprom_name,
-				      &pdev->dev, GFP_KERNEL, pdev, owl_fw_cb);
-	if (err) {
-		dev_err(&pdev->dev, "failed to request caldata (%d).\n", err);
-		kfree(ctx);
-	}
-	return err;
-}
-
-static void owl_remove(struct pci_dev *pdev)
-{
-	struct owl_ctx *ctx = pci_get_drvdata(pdev);
-
-	if (ctx) {
-		wait_for_completion(&ctx->eeprom_load);
-		pci_set_drvdata(pdev, NULL);
-		kfree(ctx);
-	}
-}
-
-static const struct pci_device_id owl_pci_table[] = {
-	{ PCI_VDEVICE(ATHEROS, 0xff1c) }, /* PCIe */
-	{ PCI_VDEVICE(ATHEROS, 0xff1d) }, /* PCI */
-	{ },
-};
-MODULE_DEVICE_TABLE(pci, owl_pci_table);
-
-static struct pci_driver owl_driver = {
-	.name		= "owl-loader",
-	.id_table	= owl_pci_table,
-	.probe		= owl_probe,
-	.remove		= owl_remove,
-};
-module_pci_driver(owl_driver);
-MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>");
-MODULE_DESCRIPTION("Initializes Atheros' Owl Emulation devices");
-MODULE_LICENSE("GPL v2");