brcm2708: add kernel 4.14 support

Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 83 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0052-firmware-bcm2835-Support-ARCH_BCM270x.patch b/target/linux/brcm2708/patches-4.14/950-0052-firmware-bcm2835-Support-ARCH_BCM270x.patch
new file mode 100644
index 0000000000..57adad39c3
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.14/950-0052-firmware-bcm2835-Support-ARCH_BCM270x.patch
@@ -0,0 +1,83 @@
+From ece6072fd68653329941477989fa12fd1334c001 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
+Date: Fri, 26 Jun 2015 14:25:01 +0200
+Subject: [PATCH 052/454] firmware: bcm2835: Support ARCH_BCM270x
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Support booting without Device Tree.
+Turn on USB power.
+Load driver early because of lacking support for deferred probing
+in many drivers.
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+
+firmware: bcm2835: Don't turn on USB power
+
+The raspberrypi-power driver is now used to turn on USB power.
+
+This partly reverts commit:
+firmware: bcm2835: Support ARCH_BCM270x
+
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+---
+ drivers/firmware/raspberrypi.c | 19 +++++++++++++++++--
+ 1 file changed, 17 insertions(+), 2 deletions(-)
+
+--- a/drivers/firmware/raspberrypi.c
++++ b/drivers/firmware/raspberrypi.c
+@@ -28,6 +28,8 @@ struct rpi_firmware {
+ 	u32 enabled;
+ };
+ 
++static struct platform_device *g_pdev;
++
+ static DEFINE_MUTEX(transaction_lock);
+ 
+ static void response_callback(struct mbox_client *cl, void *msg)
+@@ -207,6 +209,7 @@ static int rpi_firmware_probe(struct pla
+ 	init_completion(&fw->c);
+ 
+ 	platform_set_drvdata(pdev, fw);
++	g_pdev = pdev;
+ 
+ 	rpi_firmware_print_firmware_revision(fw);
+ 
+@@ -218,6 +221,7 @@ static int rpi_firmware_remove(struct pl
+ 	struct rpi_firmware *fw = platform_get_drvdata(pdev);
+ 
+ 	mbox_free_channel(fw->chan);
++	g_pdev = NULL;
+ 
+ 	return 0;
+ }
+@@ -230,7 +234,7 @@ static int rpi_firmware_remove(struct pl
+  */
+ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
+ {
+-	struct platform_device *pdev = of_find_device_by_node(firmware_node);
++	struct platform_device *pdev = g_pdev;
+ 
+ 	if (!pdev)
+ 		return NULL;
+@@ -253,7 +257,18 @@ static struct platform_driver rpi_firmwa
+ 	.probe		= rpi_firmware_probe,
+ 	.remove		= rpi_firmware_remove,
+ };
+-module_platform_driver(rpi_firmware_driver);
++
++static int __init rpi_firmware_init(void)
++{
++	return platform_driver_register(&rpi_firmware_driver);
++}
++subsys_initcall(rpi_firmware_init);
++
++static void __init rpi_firmware_exit(void)
++{
++	platform_driver_unregister(&rpi_firmware_driver);
++}
++module_exit(rpi_firmware_exit);
+ 
+ MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+ MODULE_DESCRIPTION("Raspberry Pi firmware driver");