diff options
| author | Álvaro Fernández Rojas <noltari@gmail.com> | 2016-04-07 21:25:10 +0200 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2016-04-07 21:25:10 +0200 |
| commit | a8d4d71c41ff0158c2026cac5981e39702167da9 (patch) | |
| tree | 0c54ec3eb59f5bab6aa7318d14c92ff875412202 /target/linux/brcm2708/image/config.txt | |
| parent | 59e0e88c22007fd77ee9c6c8e02a689889a5f597 (diff) | |
| download | upstream-a8d4d71c41ff0158c2026cac5981e39702167da9.tar.gz upstream-a8d4d71c41ff0158c2026cac5981e39702167da9.tar.bz2 upstream-a8d4d71c41ff0158c2026cac5981e39702167da9.zip | |
brcm2708: update to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/brcm2708/image/config.txt')
| -rw-r--r-- | target/linux/brcm2708/image/config.txt | 17 |
1 files changed, 12 insertions, 5 deletions
diff --git a/target/linux/brcm2708/image/config.txt b/target/linux/brcm2708/image/config.txt index 75b1cab7af..8c96f1fe97 100644 --- a/target/linux/brcm2708/image/config.txt +++ b/target/linux/brcm2708/image/config.txt @@ -476,7 +476,14 @@ ## Stop start.elf from filling in ATAGS (memory from 0x100) before ## launching kernel ## -disable_commandline_tags=2 +#disable_commandline_tags=2 + +## enable_uart +## Enables or disables uart pin multiplexing +## Raspberry Pi 1/2: if unset, uart is enabled by default +## Raspberry Pi 3: if unset uart is disabled by default +## +enable_uart=1 ## cmdline (string) ## Command line parameters. Can be used instead of cmdline.txt file @@ -491,7 +498,7 @@ disable_commandline_tags=2 ## kernel_address ## Address to load kernel.img file at ## -kernel_address=0x8000 +#kernel_address=0x8000 ## ramfsfile (string) ## ramfs file to load @@ -515,21 +522,21 @@ kernel_address=0x8000 ## device_tree_address ## Address to load device_tree at ## -device_tree_address=0x100 +#device_tree_address=0x100 ## init_uart_baud ## Initial uart baud rate. ## ## Default 115200 ## -init_uart_baud=115200 +#init_uart_baud=115200 ## init_uart_clock ## Initial uart clock. ## ## Default 3000000 (3MHz) ## -init_uart_clock=3000000 +#init_uart_clock=3000000 ## init_emmc_clock ## Initial emmc clock, increasing this can speedup your SD-card. |