Use 2.6.27 for au1000

SVN-Revision: 13220

6 files changed, 102 insertions, 0 deletions

diff --git a/target/linux/au1000/patches-2.6.27/001-mtx1_cmdline.patch b/target/linux/au1000/patches-2.6.27/001-mtx1_cmdline.patch
new file mode 100644
index 0000000000..a41ee6f21d
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.27/001-mtx1_cmdline.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/au1000/mtx-1/init.c
++++ b/arch/mips/au1000/mtx-1/init.c
+@@ -54,7 +54,7 @@ void __init prom_init(void)
+ 	prom_argv = (char **) fw_arg1;
+ 	prom_envp = (char **) fw_arg2;
+ 
+-	prom_init_cmdline();
++	strcpy(arcs_cmdline, CONFIG_CMDLINE);
+ 
+ 	memsize_str = prom_getenv("memsize");
+ 	if (!memsize_str)
diff --git a/target/linux/au1000/patches-2.6.27/002-openwrt_rootfs.patch b/target/linux/au1000/patches-2.6.27/002-openwrt_rootfs.patch
new file mode 100644
index 0000000000..00cda2561c
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.27/002-openwrt_rootfs.patch
@@ -0,0 +1,12 @@
+diff -urN linux-2.6.27.5/arch/mips/au1000/mtx-1/platform.c linux-2.6.27.5.new/arch/mips/au1000/mtx-1/platform.c
+--- linux-2.6.27.5/arch/mips/au1000/mtx-1/platform.c	2008-11-07 18:55:34.000000000 +0100
++++ linux-2.6.27.5.new/arch/mips/au1000/mtx-1/platform.c	2008-11-15 15:33:31.000000000 +0100
+@@ -90,7 +90,7 @@
+ 
+ static struct mtd_partition mtx1_mtd_partitions[] = {
+ 	{
+-		.name	= "filesystem",
++		.name	= "rootfs",
+ 		.size	= 0x01C00000,
+ 		.offset	= 0,
+ 	},
diff --git a/target/linux/au1000/patches-2.6.27/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-2.6.27/003-au1000_eth_ioctl.patch
new file mode 100644
index 0000000000..935898159f
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.27/003-au1000_eth_ioctl.patch
@@ -0,0 +1,15 @@
+--- a/drivers/net/au1000_eth.c
++++ b/drivers/net/au1000_eth.c
+@@ -1306,9 +1306,12 @@ static void set_rx_mode(struct net_devic
+ 	}
+ }
+ 
++#define AU1000_KNOWN_PHY_IOCTLS 		(SIOCGMIIPHY & 0xfff0)
+ static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ 	struct au1000_private *aup = (struct au1000_private *)dev->priv;
++	if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS)
++		return -EINVAL;
+ 
+ 	if (!netif_running(dev)) return -EINVAL;
+ 
diff --git a/target/linux/au1000/patches-2.6.27/004-state_led_phy_fix.patch b/target/linux/au1000/patches-2.6.27/004-state_led_phy_fix.patch
new file mode 100644
index 0000000000..3e5a4ebf01
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.27/004-state_led_phy_fix.patch
@@ -0,0 +1,31 @@
+--- linux-2.6.27/drivers/net/au1000_eth.c	2008-10-18 22:37:52.000000000 +0200
++++ linux-2.6.27.new/drivers/net/au1000_eth.c	2008-11-02 22:03:14.000000000 +0100
+@@ -187,6 +187,15 @@
+ #  undef AU1XXX_PHY1_IRQ
+ #endif
+ 
++#if defined(CONFIG_MIPS_MTX1)
++/*
++ * 4G MeshCube (MTX-1) board
++ * PHY is at address 31 on MAC0
++ * autodetect fails if not searched for highest address !
++ */
++# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR
++#endif
++
+ #if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
+ # error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
+ #endif
+@@ -383,6 +392,12 @@
+ 	aup->old_duplex = -1;
+ 	aup->phy_dev = phydev;
+ 
++#ifdef CONFIG_MIPS_MTX1
++	/* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */
++	printk(KERN_INFO "MTX-1 PHY: updating LED settings\n");
++	phy_write(phydev, 0x11, 0xff80);
++#endif
++
+ 	printk(KERN_INFO "%s: attached PHY driver [%s] "
+ 	       "(mii_bus:phy_addr=%s, irq=%d)\n",
+ 	       dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
diff --git a/target/linux/au1000/patches-2.6.27/005-mtx1_wdt_fix.patch b/target/linux/au1000/patches-2.6.27/005-mtx1_wdt_fix.patch
new file mode 100644
index 0000000000..0b0fc02efd
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.27/005-mtx1_wdt_fix.patch
@@ -0,0 +1,23 @@
+diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
+index b4b7b0a..3acce62 100644
+--- a/drivers/watchdog/mtx-1_wdt.c
++++ b/drivers/watchdog/mtx-1_wdt.c
+@@ -98,6 +98,8 @@ static void mtx1_wdt_reset(void)
+ 
+ static void mtx1_wdt_start(void)
+ {
++	unsigned long flags;
++
+ 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
+ 	if (!mtx1_wdt_device.queue) {
+ 		mtx1_wdt_device.queue = 1;
+@@ -110,6 +112,8 @@ static void mtx1_wdt_start(void)
+ 
+ static int mtx1_wdt_stop(void)
+ {
++	unsigned long flags;
++
+ 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
+ 	if (mtx1_wdt_device.queue) {
+ 		mtx1_wdt_device.queue = 0;
+
diff --git a/target/linux/au1000/patches-2.6.27/006-missing_string_header.patch b/target/linux/au1000/patches-2.6.27/006-missing_string_header.patch
new file mode 100644
index 0000000000..ed8a0bebe7
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.27/006-missing_string_header.patch
@@ -0,0 +1,10 @@
+--- linux-2.6.27.5/arch/mips/au1000/mtx-1/init.c	2008-11-07 18:55:34.000000000 +0100
++++ linux-2.6.27.5.new/arch/mips/au1000/mtx-1/init.c	2008-11-15 16:09:47.000000000 +0100
+@@ -32,6 +32,7 @@
+ #include <linux/init.h>
+ 
+ #include <asm/bootinfo.h>
++#include <asm/string.h>
+ 
+ #include <prom.h>
+