aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
authorMichael Pratt <mcpratt@pm.me>2021-01-01 16:48:52 -0500
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-01-07 19:51:50 +0100
commit0070650df45da29a55a89922544dba6859c18f2b (patch)
tree8d39fecdb7add794f134e586b85427a059f3265f /target/linux/ath79
parentecded5bf0908953c47933967c0046cceb3ce0ec1 (diff)
downloadupstream-0070650df45da29a55a89922544dba6859c18f2b.tar.gz
upstream-0070650df45da29a55a89922544dba6859c18f2b.tar.bz2
upstream-0070650df45da29a55a89922544dba6859c18f2b.zip
ath79: move small-flash Engenius boards to tiny
This moves some of the Engenius boards from generic to tiny: - EAP350 v1 - ECB350 v1 - ENH202 v1 For these, factory.bin builds are already failing on master branch because of the unique situation for these boards: - 8 MB flash - an extra "failsafe" image for recovery - TFTP does not work (barely possible with 600 MTU) - bootloader loads image from a longer flash offset - 1 eraseblock each needed for OKLI kernel loader and fake rootfs - using mtd-concat to make use of remaining space... The manual alternative would be removing the failsafe partition. However this comes with the risk of extremely difficult recovery if a flash ever fails because TFTP on the bootloader is bugged. Signed-off-by: Michael Pratt <mcpratt@pm.me> [improve commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79')
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds8
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network32
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom5
-rw-r--r--target/linux/ath79/image/common-engenius.mk33
-rw-r--r--target/linux/ath79/image/generic.mk70
-rw-r--r--target/linux/ath79/image/tiny.mk35
-rwxr-xr-xtarget/linux/ath79/tiny/base-files/etc/board.d/01_leds8
-rwxr-xr-xtarget/linux/ath79/tiny/base-files/etc/board.d/02_network10
-rw-r--r--target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
9 files changed, 104 insertions, 100 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index b961e7d3e8..079c8d4e47 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -182,14 +182,6 @@ dlink,dap-1365-a1)
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "green:internet" "switch0" "0x20"
;;
-engenius,enh202-v1)
- ucidef_set_led_switch "lan" "LAN" "amber:lan" "switch0" "0x10"
- ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan0" "1" "100"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "amber:rssimedium" "wlan0" "33" "100"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "67" "100"
- ;;
engenius,ens202ext-v1|\
engenius,enstationac-v1)
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index c79286d45d..c08f374d3a 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -33,11 +33,9 @@ ath79_setup_interfaces()
dlink,dap-3320-a1|\
dlink,dir-505|\
engenius,eap300-v2|\
- engenius,eap350-v1|\
engenius,eap600|\
engenius,ecb1200|\
engenius,ecb1750|\
- engenius,ecb350-v1|\
engenius,ecb600|\
enterasys,ws-ap3705i|\
glinet,gl-ar300m-lite|\
@@ -227,11 +225,6 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
;;
- engenius,enh202-v1)
- ucidef_set_interface_wan "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "4:lan:1"
- ;;
engenius,ens202ext-v1)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
@@ -530,19 +523,6 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
label_mac=$lan_mac
;;
- engenius,enh202-v1|\
- ubnt,airrouter|\
- ubnt,bullet-m-ar7240|\
- ubnt,bullet-m-ar7241|\
- ubnt,nanobridge-m|\
- ubnt,nanostation-loco-m|\
- ubnt,nanostation-m|\
- ubnt,picostation-m|\
- ubnt,powerbridge-m|\
- ubnt,rocket-m|\
- ubnt,unifi)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
engenius,epg5000)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
@@ -623,6 +603,18 @@ ath79_setup_macs()
wan_mac=$(mtd_get_mac_text mac 0x18)
label_mac=$wan_mac
;;
+ ubnt,airrouter|\
+ ubnt,bullet-m-ar7240|\
+ ubnt,bullet-m-ar7241|\
+ ubnt,nanobridge-m|\
+ ubnt,nanostation-loco-m|\
+ ubnt,nanostation-m|\
+ ubnt,picostation-m|\
+ ubnt,powerbridge-m|\
+ ubnt,rocket-m|\
+ ubnt,unifi)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
ubnt,litebeam-ac-gen2|\
ubnt,nanobeam-ac-gen2|\
ubnt,powerbeam-5ac-500|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 28ac38e1d4..95ad2a57ef 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -74,10 +74,7 @@ case "$FIRMWARE" in
avm,fritz300e)
caldata_extract_reverse "urloader" 0x1541 0x440
;;
- buffalo,wzr-hp-g302h-a1a0|\
- engenius,eap350-v1|\
- engenius,ecb350-v1|\
- engenius,enh202-v1)
+ buffalo,wzr-hp-g302h-a1a0)
caldata_extract "art" 0x1000 0xeb8
;;
buffalo,wzr-hp-g450h|\
diff --git a/target/linux/ath79/image/common-engenius.mk b/target/linux/ath79/image/common-engenius.mk
new file mode 100644
index 0000000000..56e8f8cf67
--- /dev/null
+++ b/target/linux/ath79/image/common-engenius.mk
@@ -0,0 +1,33 @@
+DEVICE_VARS += ENGENIUS_IMGNAME
+
+# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
+# sysupgrade, as otherwise it will implant the old configuration from
+# OEM firmware when writing rootfs from factory.bin
+define Build/engenius-tar-gz
+ -[ -f "$@" ] && \
+ mkdir -p $@.tmp && \
+ touch $@.tmp/failsafe.bin && \
+ echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
+ echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
+ $(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
+ $@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
+ $(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
+ $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -C $@.tmp . | gzip -9n > $@ && \
+ rm -rf $@.tmp
+endef
+
+define Device/engenius_loader_okli
+ DEVICE_VENDOR := EnGenius
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+ LOADER_TYPE := bin
+ COMPILE := loader-$(1).bin loader-$(1).uImage
+ COMPILE/loader-$(1).bin := loader-okli-compile
+ COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
+ uImage lzma
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
+ append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+ check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME)
+endef
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 190f477b7e..ccc9ff2ac2 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1,12 +1,12 @@
include ./common-buffalo.mk
+include ./common-engenius.mk
include ./common-netgear.mk
include ./common-tp-link.mk
include ./common-yuncore.mk
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
-DEVICE_VARS += KERNEL_INITRAMFS_PREFIX
-DEVICE_VARS += DAP_SIGNATURE ENGENIUS_IMGNAME
+DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE
DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL
define Build/add-elecom-factory-initramfs
@@ -69,24 +69,6 @@ define Build/edimax-headers
rm -rf $@.uImage $@.rootfs
endef
-# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
-# sysupgrade, as otherwise it will implant the old configuration from
-# OEM firmware when writing rootfs from factory.bin
-define Build/engenius-tar-gz
- -[ -f "$@" ] && \
- mkdir -p $@.tmp && \
- touch $@.tmp/failsafe.bin && \
- echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
- echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
- $(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
- $@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
- $(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
- $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- -C $@.tmp . | gzip -9n > $@ && \
- rm -rf $@.tmp
-endef
-
define Build/mkdapimg2
$(STAGING_DIR_HOST)/bin/mkdapimg2 \
-i $@ -o $@.new \
@@ -974,20 +956,6 @@ define Device/embeddedwireless_dorin
endef
TARGET_DEVICES += embeddedwireless_dorin
-define Device/engenius_loader_okli
- DEVICE_VENDOR := EnGenius
- KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
- LOADER_TYPE := bin
- COMPILE := loader-$(1).bin loader-$(1).uImage
- COMPILE/loader-$(1).bin := loader-okli-compile
- COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
- uImage lzma
- IMAGES += factory.bin
- IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
- append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
- check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME)
-endef
-
define Device/engenius_eap300-v2
$(Device/engenius_loader_okli)
SOC := ar9341
@@ -999,17 +967,6 @@ define Device/engenius_eap300-v2
endef
TARGET_DEVICES += engenius_eap300-v2
-define Device/engenius_eap350-v1
- $(Device/engenius_loader_okli)
- SOC := ar7242
- DEVICE_MODEL := EAP350
- DEVICE_VARIANT := v1
- IMAGE_SIZE := 4864k
- LOADER_FLASH_OFFS := 0x1b0000
- ENGENIUS_IMGNAME := senao-eap350
-endef
-TARGET_DEVICES += engenius_eap350-v1
-
define Device/engenius_eap600
$(Device/engenius_loader_okli)
SOC := ar9344
@@ -1046,17 +1003,6 @@ define Device/engenius_ecb1750
endef
TARGET_DEVICES += engenius_ecb1750
-define Device/engenius_ecb350-v1
- $(Device/engenius_loader_okli)
- SOC := ar7242
- DEVICE_MODEL := ECB350
- DEVICE_VARIANT := v1
- IMAGE_SIZE := 4864k
- LOADER_FLASH_OFFS := 0x1b0000
- ENGENIUS_IMGNAME := senao-ecb350
-endef
-TARGET_DEVICES += engenius_ecb350-v1
-
define Device/engenius_ecb600
$(Device/engenius_loader_okli)
SOC := ar9344
@@ -1067,18 +1013,6 @@ define Device/engenius_ecb600
endef
TARGET_DEVICES += engenius_ecb600
-define Device/engenius_enh202-v1
- $(Device/engenius_loader_okli)
- SOC := ar7240
- DEVICE_MODEL := ENH202
- DEVICE_VARIANT := v1
- DEVICE_PACKAGES := rssileds
- IMAGE_SIZE := 4864k
- LOADER_FLASH_OFFS := 0x1b0000
- ENGENIUS_IMGNAME := senao-enh202
-endef
-TARGET_DEVICES += engenius_enh202-v1
-
define Device/engenius_ens202ext-v1
$(Device/engenius_loader_okli)
SOC := ar9341
diff --git a/target/linux/ath79/image/tiny.mk b/target/linux/ath79/image/tiny.mk
index 83c34d718b..36d2818ad5 100644
--- a/target/linux/ath79/image/tiny.mk
+++ b/target/linux/ath79/image/tiny.mk
@@ -1,4 +1,5 @@
include ./common-buffalo.mk
+include ./common-engenius.mk
define Device/buffalo_whr-g301n
$(Device/buffalo_common)
@@ -30,6 +31,40 @@ define Device/dlink_dir-615-e4
endef
TARGET_DEVICES += dlink_dir-615-e4
+define Device/engenius_eap350-v1
+ $(Device/engenius_loader_okli)
+ SOC := ar7242
+ DEVICE_MODEL := EAP350
+ DEVICE_VARIANT := v1
+ IMAGE_SIZE := 4864k
+ LOADER_FLASH_OFFS := 0x1b0000
+ ENGENIUS_IMGNAME := senao-eap350
+endef
+TARGET_DEVICES += engenius_eap350-v1
+
+define Device/engenius_ecb350-v1
+ $(Device/engenius_loader_okli)
+ SOC := ar7242
+ DEVICE_MODEL := ECB350
+ DEVICE_VARIANT := v1
+ IMAGE_SIZE := 4864k
+ LOADER_FLASH_OFFS := 0x1b0000
+ ENGENIUS_IMGNAME := senao-ecb350
+endef
+TARGET_DEVICES += engenius_ecb350-v1
+
+define Device/engenius_enh202-v1
+ $(Device/engenius_loader_okli)
+ SOC := ar7240
+ DEVICE_MODEL := ENH202
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := rssileds
+ IMAGE_SIZE := 4864k
+ LOADER_FLASH_OFFS := 0x1b0000
+ ENGENIUS_IMGNAME := senao-enh202
+endef
+TARGET_DEVICES += engenius_enh202-v1
+
define Device/pqi_air-pen
SOC := ar9330
DEVICE_VENDOR := PQI
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
index 26926b6f64..f0b4acf066 100755
--- a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
@@ -21,6 +21,14 @@ tplink,tl-wr941-v4)
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10"
;;
+engenius,enh202-v1)
+ ucidef_set_led_switch "lan" "LAN" "amber:lan" "switch0" "0x10"
+ ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "amber:rssimedium" "wlan0" "33" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "67" "100"
+ ;;
netgear,wnr1000-v2|\
netgear,wnr2000-v3)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "amber:wan" "eth0"
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
index cbcdbe9a89..ce95bf7037 100755
--- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
@@ -28,6 +28,8 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
+ engenius,eap350-v1|\
+ engenius,ecb350-v1|\
pqi,air-pen|\
tplink,tl-mr10u|\
tplink,tl-mr3020-v1|\
@@ -51,6 +53,11 @@ ath79_setup_interfaces()
tplink,tl-wr802n-v2)
ucidef_set_interface_lan "eth0"
;;
+ engenius,enh202-v1)
+ ucidef_set_interface_wan "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "4:lan:1"
+ ;;
tplink,tl-mr3220-v1|\
tplink,tl-mr3420-v1|\
tplink,tl-mr3420-v3|\
@@ -99,6 +106,9 @@ ath79_setup_macs()
wan_mac=$(mtd_get_mac_ascii "nvram" "wan_mac")
label_mac=$wan_mac
;;
+ engenius,enh202-v1)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
tplink,tl-wr941-v2|\
tplink,tl-wr941n-v7-cn)
base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
diff --git a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 6ae2dc5f94..ffbc46afd0 100644
--- a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -10,6 +10,9 @@ case "$FIRMWARE" in
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
buffalo,whr-g301n|\
+ engenius,eap350-v1|\
+ engenius,ecb350-v1|\
+ engenius,enh202-v1|\
tplink,tl-wa701nd-v1|\
tplink,tl-wa730re-v1|\
tplink,tl-wa801nd-v1|\