diff options
author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2020-06-09 12:30:35 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-08-12 14:03:17 +0200 |
commit | 7a705c067f729e1f6edf4945985ec4f5761ca0ab (patch) | |
tree | 45db249607e55022c73cfbd994e3148173b63e0c /target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi | |
parent | ed19ba04e89ea102c2fb5431d63e0601936dc448 (diff) | |
download | upstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.tar.gz upstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.tar.bz2 upstream-7a705c067f729e1f6edf4945985ec4f5761ca0ab.zip |
ath79: add support for MikroTik RouterBOARD LHG 2nD
The MikroTik RouterBOARD LHG 2nD (sold as LHG 2) is a 2.4 GHz
802.11b/g/n outdoor device with a feed and an integrated dual
polarization grid dish antenna based on the LHG-HB platform.
See https://mikrotik.com/product/lhg_2 for more info.
Specifications:
- SoC: Qualcomm Atheros QCA9533
- RAM: 64 MB
- Storage: 16 MB NOR
- Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 18 dBi antenna
- Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 12-28 Vdc PoE in
- 8 user-controllable LEDs:
· 1x power (blue)
· 1x user (green)
· 1x lan (green)
· 1x wlan (green)
· 4x rssi (green)
Note:
The rssihigh LED is disabled, as it shares GPIO 16 with the reset
button.
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[rebase, remove rssiled setup, adjust commit message, add DTSIs]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi')
-rw-r--r-- | target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi new file mode 100644 index 0000000000..8af8601da2 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-16m.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca953x.dtsi" + +/ { + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RouterBoot"; + reg = <0x0 0x20000>; + read-only; + compatible = "mikrotik,routerboot-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader1"; + reg = <0x0 0x0>; + read-only; + }; + + hard_config: hard_config { + read-only; + }; + + bios { + size = <0x1000>; + read-only; + }; + + partition@10000 { + label = "bootloader2"; + reg = <0x10000 0x0>; + read-only; + }; + + soft_config { + label = "soft_config"; + }; + }; + + partition@20000 { + compatible = "mikrotik,minor"; + label = "firmware"; + reg = <0x020000 0xfe0000>; + }; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&wmac { + status = "okay"; + + qca,no-eeprom; +}; |