ath79: correctly define WiFi switch for TL-WR841ND v8

The TL-WR841ND v8 feature a WiFi switch instead of a button.
This adds the corresponding input-type to prevent booting into
failsafe regularly.

This has been defined correctly in ar71xx, but was overlooked
when migrating to ath79. In contrast, the TL-WR842ND v2, which
has the key set up as switch in ar71xx, actually has a button.
The TL-MR3420 v2 has a button as well and is set up correctly
for both targets. (Information based on TP-Link user guide)

Note:

While looking into this, I found that support PR for TL-MR3420 v2
switched reset button to ACTIVE_HIGH. However, the other two
device still use ACTIVE_LOW. This seems strange, but I cannot
verify it lacking the affected devices.

Fixes: FS#2733
Fixes: 9601d94138de ("add support for TP-Link TL-WR841N/ND v8")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 18 insertions, 9 deletions

diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
index d9b0ee86f5..4df0feae98 100644
--- a/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
+++ b/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
@@ -7,6 +7,24 @@
 	model = "TP-Link TL-WR842N/ND v2";
 	compatible = "tplink,tl-wr842n-v2", "qca,ar9341";
 
+	keys {
+		compatible = "gpio-keys";
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
 	gpio-export {
 		compatible = "gpio-export";
 
@@ -18,15 +36,6 @@
 	};
 };
 
-&keys {
-	reset {
-		label = "Reset";
-		linux,code = <KEY_RESTART>;
-		gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-		debounce-interval = <60>;
-	};
-};
-
 &leds {
 	usb {
 		label = "tp-link:green:usb";