ath79: split base-files into subtargets

While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.

However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space (especially helpful for the tiny devices).

The only script remaining in parent base-files is
/etc/hotplug.d/ieee80211/00-wifi-migration, everything else is
moved/split.

Note that this will increase overall code lines, but reduce code
per subtarget.

base-files ipk size reduction:
master (generic)   49135 B
split (generic)    48533 B (- 0.6 kiB)
split (tiny)       43337 B (- 5.7 kiB)
split (nand)       44423 B (- 4.6 kiB)

Tested on TL-WR1043ND v4 (generic) and TL-WR841N v12 (tiny).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

9 files changed, 0 insertions, 1283 deletions

diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
deleted file mode 100755
index 499fe0031c..0000000000
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,307 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-boardname="${board##*,}"
-
-case "$board" in
-8dev,carambola2)
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:orange:eth0" "eth0"
-	ucidef_set_led_switch "wan" "WAN" "$boardname:orange:eth1" "switch0" "0x04"
-	;;
-alfa-network,ap121f)
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
-	;;
-avm,fritz300e)
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
-	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:green:rssi2" "wlan0" "40" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
-	;;
-avm,fritz4020)
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x1E"
-	;;
-buffalo,whr-g301n)
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
-	ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02"
-	ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x04"
-	ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
-	ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
-	;;
-comfast,cf-e110n-v2)
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
-	ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x02"
-	ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
-	;;
-comfast,cf-e120a-v3)
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
-	ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x04"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
-	;;
-comfast,cf-e313ac)
-	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
-	;;
-comfast,cf-e314n-v2)
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
-	;;
-comfast,cf-e5)
-	ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:blue:rssi0" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100"
-	;;
-dlink,dir-842-c1|\
-dlink,dir-842-c2|\
-dlink,dir-842-c3|\
-dlink,dir-859-a1)
-	ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
-	;;
-engenius,ecb1750)
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
-	;;
-engenius,ews511ap)
-	ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth1"
-	ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth0"
-	;;
-etactica,eg200)
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
-	ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
-	;;
-glinet,gl-ar150)
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
-	;;
-glinet,gl-ar300m-nand|\
-glinet,gl-ar300m-nor)
-	ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0"
-	;;
-glinet,gl-ar300m-lite)
-	ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0"
-	;;
-glinet,gl-x750)
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
-	;;
-netgear,wnr1000-v2|\
-netgear,wnr2000-v3)
-	ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
-	ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
-	ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
-	ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
-	ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04"
-	ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02"
-	ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02"
-	ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02"
-	ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02"
-	;;
-netgear,wnr612-v2|\
-on,n150r)
-	ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
-	ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
-	ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
-	;;
-pcs,cap324)
-	ucidef_set_led_netdev "lan" "LAN" "pcs:lan:green" "eth0"
-	;;
-pcs,cr3000)
-	ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04"
-	ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08"
-	ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10"
-	ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
-	;;
-qihoo,c301)
-	ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
-	;;
-tplink,archer-a7-v5|\
-tplink,archer-c7-v4|\
-tplink,archer-c7-v5)
-	ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
-	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
-	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
-	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
-	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
-	;;
-tplink,archer-c2-v3|\
-tplink,tl-wr1043nd-v4|\
-tplink,tl-wr1043n-v5)
-	ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
-	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
-	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
-	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
-	;;
-tplink,archer-c6-v2)
-	ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
-	ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
-	;;
-tplink,archer-c25-v1|\
-tplink,tl-wr841-v9|\
-tplink,tl-wr841-v10|\
-tplink,tl-wr841-v11|\
-tplink,tl-wr841-v12|\
-tplink,tl-wr842n-v3)
-	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
-	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
-	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
-	;;
-tplink,archer-c58-v1|\
-tplink,archer-c59-v1|\
-tplink,archer-c59-v2|\
-tplink,archer-c60-v1|\
-tplink,archer-c60-v2)
-	ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
-	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
-	;;
-tplink,archer-d50-v1)
-	ucidef_set_led_switch "lan" "LAN" "tp-link:white:lan" "switch0" "0x1c"
-	ucidef_set_led_switch "wan_data" "WAN Data" "tp-link:white:internet" "switch0" "0x02" "" "tx rx"
-	ucidef_set_led_switch "wan_link" "WAN Link" "tp-link:white:wan" "switch0" "0x02" "" "link"
-	;;
-tplink,cpe210-v1|\
-tplink,cpe220-v2|\
-tplink,cpe510-v1)
-	ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
-	;;
-tplink,cpe210-v2|\
-tplink,cpe210-v3)
-	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
-	;;
-tplink,cpe510-v2|\
-tplink,cpe510-v3)
-	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
-	;;
-tplink,cpe610-v1)
-	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
-	;;
-tplink,re355-v1|\
-tplink,re450-v1|\
-tplink,re450-v2)
-	ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
-	ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
-	;;
-tplink,tl-mr3020-v1|\
-tplink,tl-mr3040-v2)
-	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
-	;;
-tplink,tl-mr3420-v2|\
-tplink,tl-wr740n-v4|\
-tplink,tl-wr741nd-v4|\
-tplink,tl-wr841-v8|\
-tplink,tl-wr842n-v2)
-	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
-	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
-	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
-	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
-	;;
-tplink,tl-wr740n-v1|\
-tplink,tl-wr740n-v3|\
-tplink,tl-wr741-v1|\
-tplink,tl-wr743nd-v1|\
-tplink,tl-wr841-v5|\
-tplink,tl-wr941-v4)
-	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
-	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
-	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
-	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
-	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
-	;;
-tplink,tl-wr940n-v3|\
-tplink,tl-wr940n-v4|\
-tplink,tl-wr941nd-v6)
-	ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "tp-link:blue:lan2" "switch0" "0x08"
-	ucidef_set_led_switch "lan3" "LAN3" "tp-link:blue:lan3" "switch0" "0x04"
-	ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02"
-	;;
-trendnet,tew-823dru)
-	ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0"
-	;;
-ubnt,bullet-m|\
-ubnt,bullet-m-xw|\
-ubnt,nanostation-m|\
-ubnt,nanostation-m-xw|\
-ubnt,rocket-m)
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100"
-	;;
-ubnt,nanobeam-ac|\
-ubnt,nanostation-ac)
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:blue:rssi0" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:blue:rssi1" "wlan0" "26" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:blue:rssi2" "wlan0" "51" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:blue:rssi3" "wlan0" "76" "100"
-	;;
-wd,mynet-wifi-rangeextender)
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:rssi-low" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimedium" "RSSIMED" "$boardname:blue:rssi-med" "wlan0" "33" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIMAX" "$boardname:blue:rssi-max" "wlan0" "66" "100"
-	;;
-yuncore,a770)
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x10"
-	;;
-zbtlink,zbt-wd323)
-	ucidef_set_led_switch "lan1" "LAN1" "zbt-wd323:orange:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "zbt-wd323:orange:lan2" "switch0" "0x08"
-	;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
deleted file mode 100755
index b5209f7014..0000000000
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,467 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/k2t.sh
-
-ath79_setup_interfaces()
-{
-	local board="$1"
-
-	case "$board" in
-	adtran,bsap1800-v2|\
-	adtran,bsap1840|\
-	alfa-network,ap121f|\
-	aruba,ap-105|\
-	avm,fritz300e|\
-	devolo,dvl1200i|\
-	devolo,dvl1750c|\
-	devolo,dvl1750i|\
-	devolo,dvl1750x|\
-	engenius,ecb1750|\
-	glinet,gl-ar300m-lite|\
-	netgear,ex6400|\
-	netgear,ex7300|\
-	ocedo,koala|\
-	ocedo,raccoon|\
-	pcs,cap324|\
-	pisen,ts-d084|\
-	pisen,wmb001n|\
-	pisen,wmm003n|\
-	pqi,air-pen|\
-	tplink,cpe210-v2|\
-	tplink,cpe210-v3|\
-	tplink,cpe510-v2|\
-	tplink,cpe510-v3|\
-	tplink,cpe610-v1|\
-	tplink,re350k-v1|\
-	tplink,re355-v1|\
-	tplink,re450-v1|\
-	tplink,re450-v2|\
-	tplink,tl-mr10u|\
-	tplink,tl-mr3020-v1|\
-	tplink,tl-mr3040-v2|\
-	tplink,tl-wa901nd-v2|\
-	tplink,tl-wr703n|\
-	ubnt,bullet-m|\
-	ubnt,bullet-m-xw|\
-	ubnt,lap-120|\
-	ubnt,nanobeam-ac|\
-	ubnt,nanostation-ac-loco|\
-	ubnt,rocket-m|\
-	ubnt,unifiac-lite|\
-	ubnt,unifiac-lr|\
-	ubnt,unifiac-mesh|\
-	ubnt,unifi|\
-	wd,mynet-wifi-rangeextender|\
-	winchannel,wb2000)
-		ucidef_set_interface_lan "eth0"
-		;;
-	avm,fritz4020|\
-	pcs,cr3000|\
-	tplink,archer-c58-v1|\
-	tplink,archer-c59-v1|\
-	tplink,archer-c59-v2)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
-		;;
-	buffalo,bhr-4grv|\
-	buffalo,wzr-hp-g450h)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
-		;;
-	buffalo,bhr-4grv2|\
-	trendnet,tew-823dru)
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
-		;;
-	buffalo,whr-g301n)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	buffalo,wzr-hp-ag300h|\
-	tplink,archer-c25-v1|\
-	tplink,tl-mr3220-v1|\
-	tplink,tl-mr3420-v1|\
-	tplink,tl-wdr3500-v1|\
-	tplink,tl-wr841-v7|\
-	tplink,tl-wr841-v9|\
-	tplink,tl-wr841-v10|\
-	tplink,tl-wr841-v11|\
-	tplink,tl-wr841-v12|\
-	tplink,tl-wr842n-v1|\
-	tplink,tl-wr842n-v3|\
-	tplink,tl-wr940n-v3|\
-	tplink,tl-wr940n-v4|\
-	tplink,tl-wr941nd-v6|\
-	ubnt,airrouter)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	buffalo,wzr-hp-g302h-a1a0)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
-		;;
-	comfast,cf-e110n-v2|\
-	comfast,cf-e120a-v3|\
-	comfast,cf-e314n-v2|\
-	tplink,cpe210-v1|\
-	tplink,cpe220-v2|\
-	tplink,cpe510-v1|\
-	ubnt,nanostation-m|\
-	ubnt,routerstation)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		;;
-	comfast,cf-wr650ac-v1|\
-	comfast,cf-wr650ac-v2)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
-		;;
-	devolo,dvl1200e|\
-	devolo,dvl1750e|\
-	ocedo,ursus)
-		ucidef_set_interface_lan "eth0 eth1"
-		;;
-	dlink,dir-825-b1)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
-		;;
-	dlink,dir-825-c1|\
-	dlink,dir-835-a1|\
-	dlink,dir-842-c1|\
-	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
-	dlink,dir-859-a1|\
-	engenius,epg5000|\
-	tplink,archer-c2-v3|\
-	tplink,tl-wr1043nd-v4|\
-	tplink,tl-wr1043n-v5)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
-		;;
-	elecom,wrc-1750ghbk2-i|\
-	elecom,wrc-300ghbk2-i)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
-		;;
-	embeddedwireless,dorin)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
-		;;
-	engenius,ews511ap)
-		ucidef_set_interface_lan "eth0 eth1" "dhcp"
-		;;
-	etactica,eg200)
-		ucidef_set_interface_lan "eth0" "dhcp"
-		;;
-	glinet,gl-ar750)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan"
-		;;
-	glinet,gl-ar750s)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
-		;;
-	iodata,etg3-r|\
-	iodata,wn-ac1167dgr|\
-	iodata,wn-ac1600dgr|\
-	iodata,wn-ac1600dgr2|\
-	iodata,wn-ag300dgr|\
-	pcs,cr5000|\
-	sitecom,wlr-7100|\
-	wd,mynet-n750)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	;;
-	librerouter,librerouter-v1)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "5:wan" "6@eth1" "4:lan"
-	;;
-	nec,wg1200cr|\
-	ubnt,nanostation-ac|\
-	ubnt,unifiac-mesh-pro|\
-	ubnt,unifiac-pro)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:wan"
-		;;
-	nec,wg800hp)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
-		;;
-	netgear,wndr3700|\
-	netgear,wndr3700v2|\
-	netgear,wndr3800|\
-	netgear,wndr3800ch)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
-		ucidef_add_switch_attr "switch0" "blinkrate" 2
-		ucidef_add_switch_port_attr "switch0" 1 led 6
-		ucidef_add_switch_port_attr "switch0" 2 led 9
-		ucidef_add_switch_port_attr "switch0" 5 led 2
-		;;
-	netgear,wnr1000-v2|\
-	netgear,wnr2000-v3|\
-	netgear,wnr612-v2|\
-	on,n150r|\
-	tplink,tl-wr740n-v1|\
-	tplink,tl-wr740n-v3|\
-	tplink,tl-wr741-v1|\
-	tplink,tl-wr743nd-v1|\
-	tplink,tl-wr841-v5|\
-	tplink,tl-wr941-v4)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-		"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	phicomm,k2t)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
-		;;
-	qihoo,c301)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:lan"
-		;;
-	rosinson,wr818)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:wan"
-		;;
-	tplink,archer-a7-v5|\
-	tplink,archer-c6-v2|\
-	tplink,archer-c7-v4|\
-	tplink,archer-c7-v5|\
-	tplink,tl-wdr3600-v1|\
-	tplink,tl-wdr4300-v1|\
-	tplink,tl-wr941n-v7-cn)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
-		;;
-	tplink,archer-c5-v1|\
-	tplink,archer-c7-v1|\
-	tplink,archer-c7-v2|\
-	tplink,tl-wdr4900-v2)
-		ucidef_add_switch "switch0" \
-			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
-		;;
-	tplink,archer-c60-v1|\
-	tplink,archer-c60-v2)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	tplink,archer-d50-v1)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
-		;;
-	tplink,tl-mr3420-v2|\
-	tplink,tl-wr740n-v4|\
-	tplink,tl-wr741nd-v4|\
-	tplink,tl-wr841-v8|\
-	tplink,tl-wr842n-v2)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
-		;;
-	tplink,tl-wr1043nd-v1)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
-		;;
-	tplink,tl-wr1043nd-v2|\
-	tplink,tl-wr1043nd-v3)
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
-		;;
-	tplink,tl-wr2543-v1)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
-		;;
-	tplink,tl-wr941-v2)
-		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
-		;;
-	ubnt,acb-isp)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
-		;;
-	ubnt,routerstation-pro)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	ubnt,nanostation-m-xw)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "5:lan" "1:wan"
-		;;
-	zbtlink,zbt-wd323|\
-	xiaomi,mi-router-4q)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "3:lan:1" "4:lan:2"
-		;;
-	zyxel,nbg6716)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
-		;;
-	*)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		;;
-	esac
-}
-
-ath79_setup_macs()
-{
-	local board="$1"
-
-	case "$board" in
-	adtran,bsap1800-v2|\
-	adtran,bsap1840)
-		lan_mac=$(mtd_get_mac_binary "Board data" 2)
-		label_mac=$lan_mac
-		;;
-	alfa-network,ap121f|\
-	ubnt,airrouter|\
-	ubnt,bullet-m|\
-	ubnt,nanostation-m|\
-	ubnt,rocket-m|\
-	ubnt,unifi)
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	avm,fritz300e)
-		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	avm,fritz4020)
-		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
-		wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
-		;;
-	dlink,dir-825-b1)
-		lan_mac=$(mtd_get_mac_text "caldata" 0xffa0)
-		wan_mac=$(mtd_get_mac_text "caldata" 0xffb4)
-		;;
-	dlink,dir-825-c1|\
-	dlink,dir-835-a1)
-		lan_mac=$(mtd_get_mac_text "mac" 0x4)
-		wan_mac=$(mtd_get_mac_text "mac" 0x18)
-		;;
-	dlink,dir-842-c1|\
-	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
-	nec,wg1200cr)
-		lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
-		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
-		label_mac=$lan_mac
-		;;
-	dlink,dir-859-a1|\
-	qihoo,c301|\
-	wd,mynet-n750)
-		lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
-		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
-		;;
-	elecom,wrc-1750ghbk2-i|\
-	elecom,wrc-300ghbk2-i)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" -2)
-		;;
-	engenius,ecb1750)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		label_mac=$(mtd_get_mac_ascii u-boot-env athaddr)
-		;;
-	engenius,epg5000)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		;;
-	engenius,ews511ap)
-		lan_mac=$(mtd_get_mac_text "u-boot-env" 0xe9)
-		eth1_mac=$(macaddr_add "$lan_mac" 1)
-		ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
-		ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
-		;;
-	iodata,etg3-r)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(macaddr_add "$lan_mac" -1)
-		label_mac=$wan_mac
-		;;
-	iodata,wn-ac1167dgr|\
-	iodata,wn-ac1600dgr|\
-	iodata,wn-ac1600dgr2|\
-	iodata,wn-ag300dgr)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		label_mac=$wan_mac
-		;;
-	jjplus,ja76pf2)
-		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	nec,wg800hp)
-		lan_mac=$(mtd_get_mac_text board_data 0x280)
-		wan_mac=$(mtd_get_mac_text board_data 0x480)
-		label_mac=$wan_mac
-		;;
-	netgear,wndr3700|\
-	netgear,wndr3700v2|\
-	netgear,wndr3800)
-		lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0x0)")
-		;;
-	phicomm,k2t)
-		lan_mac=$(k2t_get_mac "lan_mac")
-		wan_mac=$(k2t_get_mac "wan_mac")
-		;;
-	rosinson,wr818)
-		wan_mac=$(mtd_get_mac_binary factory 0x0)
-		lan_mac=$(macaddr_setbit_la "$wan_mac")
-		;;
-	sitecom,wlr-7100)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		label_mac=$lan_mac
-		;;
-	tplink,archer-a7-v5|\
-	tplink,archer-c7-v4|\
-	tplink,archer-c7-v5|\
-	tplink,tl-wr1043nd-v4|\
-	tplink,tl-wr1043n-v5)
-		base_mac=$(mtd_get_mac_binary info 0x8)
-		wan_mac=$(macaddr_add "$base_mac" 1)
-		;;
-	tplink,tl-wr941-v2|\
-	tplink,tl-wr941n-v7-cn)
-		base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
-		wan_mac=$(macaddr_add "$base_mac" 1)
-		;;
-	trendnet,tew-823dru)
-		lan_mac=$(mtd_get_mac_text mac 0x4)
-		wan_mac=$(mtd_get_mac_text mac 0x18)
-		label_mac=$wan_mac
-		;;
-	ubnt,routerstation|\
-	ubnt,routerstation-pro)
-		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	wd,mynet-wifi-rangeextender)
-		lan_mac=$(nvram get et0macaddr)
-		;;
-	zyxel,nbg6716)
-		lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
-		wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
-		;;
-	esac
-
-	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
-	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
-	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
-}
-
-board_config_update
-board=$(board_name)
-ath79_setup_interfaces $board
-ath79_setup_macs $board
-board_config_flush
-
-exit 0
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
deleted file mode 100755
index d84d6cfe85..0000000000
--- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2018 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-adtran,bsap1800-v2|\
-adtran,bsap1840)
-	ucidef_add_gpio_switch "wifi1_ext_a" "5GHz External Antenna A" "489" "1"
-	ucidef_add_gpio_switch "wifi1_int_a" "5GHz Internal Antenna A" "493"
-	ucidef_add_gpio_switch "wifi1_ext_b" "5GHz External Antenna B" "494" "1"
-	ucidef_add_gpio_switch "wifi1_int_b" "5GHz Internal Antenna B" "495"
-	ucidef_add_gpio_switch "wifi1_ext_c" "5GHz External Antenna C" "496" "1"
-	ucidef_add_gpio_switch "wifi1_int_c" "5GHz Internal Antenna C" "497"
-	ucidef_add_gpio_switch "wifi0_ext_a" "2.4GHz External Antenna A" "505" "1"
-	ucidef_add_gpio_switch "wifi0_int_a" "2.4GHz Internal Antenna A" "506"
-	ucidef_add_gpio_switch "wifi0_ext_b" "2.4GHz External Antenna B" "507" "1"
-	ucidef_add_gpio_switch "wifi0_int_b" "2.4GHz Internal Antenna B" "508"
-	ucidef_add_gpio_switch "wifi0_ext_c" "2.4GHz External Antenna C" "509" "1"
-	ucidef_add_gpio_switch "wifi0_int_c" "2.4GHz Internal Antenna C" "510"
-	;;
-comfast,cf-e5)
-	ucidef_add_gpio_switch "lte_power" "LTE Power" "14" "1"
-	ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "11" "1"
-	ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "1" "1"
-	ucidef_add_gpio_switch "lte_reset" "LTE Reset" "12" "1"
-	;;
-dlink,dir-825-c1|\
-dlink,dir-835-a1)
-	ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "20" "0"
-	;;
-librerouter,librerouter-v1)
-	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0"
-	;;
-tplink,archer-c25-v1)
-	ucidef_add_gpio_switch "led_control" "LED control" "21" "0"
-	ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1"
-	;;
-tplink,cpe210-v1|\
-tplink,cpe220-v2|\
-tplink,cpe510-v1)
-	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
-	;;
-ubnt,nanostation-ac)
-	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
-	;;
-ubnt,acb-isp)
-	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11"
-	;;
-zbtlink,zbt-wd323)
-	ucidef_add_gpio_switch "io0" "IO#0" "0"
-	ucidef_add_gpio_switch "io1" "IO#1" "1"
-	ucidef_add_gpio_switch "io2" "IO#2" "2"
-	ucidef_add_gpio_switch "io14" "IO#14" "14"
-	;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
deleted file mode 100644
index 14cfe64a41..0000000000
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ /dev/null
@@ -1,161 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath9k-eeprom-ahb-18100000.wmac.bin")
-	case $board in
-	avm,fritz4020)
-		caldata_extract_reverse "urlader" 0x1541 0x440
-		;;
-	dlink,dir-825-c1|\
-	dlink,dir-835-a1)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_text "mac" 0x4)
-		;;
-	dlink,dir-842-c1|\
-	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
-	dlink,dir-859-a1|\
-	nec,wg1200cr|\
-	wd,mynet-n750)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
-		;;
-	engenius,ecb1750)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1)
-		;;
-	engenius,epg5000|\
-	iodata,wn-ac1167dgr|\
-	iodata,wn-ac1600dgr|\
-	iodata,wn-ac1600dgr2|\
-	iodata,wn-ag300dgr|\
-	sitecom,wlr-7100)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
-		;;
-	nec,wg800hp)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
-		;;
-	qihoo,c301)
-		caldata_extract "radiocfg" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
-		;;
-	zyxel,nbg6716)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
-		;;
-	*)
-		caldata_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"ath9k-eeprom-pci-0000:00:00.0.bin")
-	case $board in
-	avm,fritz300e)
-		caldata_extract_reverse "urloader" 0x1541 0x440
-		;;
-	buffalo,whr-g301n|\
-	buffalo,wzr-hp-g302h-a1a0|\
-	tplink,tl-wr841-v5|\
-	tplink,tl-wr941-v4)
-		caldata_extract "art" 0x1000 0xeb8
-		;;
-	buffalo,wzr-hp-g450h)
-		caldata_extract "art" 0x1000 0x440
-		;;
-	dlink,dir-825-c1|\
-	dlink,dir-835-a1)
-		caldata_extract "art" 0x5000 0x440
-		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
-		;;
-	ocedo,raccoon|\
-	tplink,tl-wdr3500-v1|\
-	tplink,tl-wdr3600-v1|\
-	tplink,tl-wdr4300-v1|\
-	tplink,tl-wdr4900-v2|\
-	winchannel,wb2000)
-		caldata_extract "art" 0x5000 0x440
-		;;
-	netgear,wnr1000-v2|\
-	netgear,wnr2000-v3|\
-	netgear,wnr612-v2|\
-	on,n150r|\
-	pcs,cap324|\
-	tplink,tl-mr3220-v1|\
-	tplink,tl-mr3420-v1|\
-	tplink,tl-wr2543-v1|\
-	tplink,tl-wr740n-v1|\
-	tplink,tl-wr740n-v3|\
-	tplink,tl-wr741-v1|\
-	tplink,tl-wr743nd-v1|\
-	tplink,tl-wr841-v7|\
-	tplink,tl-wr842n-v1|\
-	ubnt,airrouter|\
-	ubnt,bullet-m|\
-	ubnt,nano-m|\
-	ubnt,rocket-m)
-		caldata_extract "art" 0x1000 0x1000
-		;;
-	pqi,air-pen)
-		caldata_extract "art" 0x1000 0x7d2
-		;;
-	ubnt,unifi)
-		caldata_extract "art" 0x1000 0x800
-		;;
-	wd,mynet-n750)
-		caldata_extract "art" 0x5000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
-		;;
-	wd,mynet-wifi-rangeextender)
-		caldata_extract "art" 0x1000 0x1000
-		ath9k_patch_mac $(nvram get wl0_hwaddr)
-		;;
-	*)
-		caldata_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"ath9k-eeprom-pci-0000:00:11.0.bin")
-	case $board in
-	buffalo,wzr-hp-ag300h|\
-	netgear,wndr3700|\
-	netgear,wndr3700v2|\
-	netgear,wndr3800|\
-	netgear,wndr3800ch)
-		caldata_extract "art" 0x1000 0xeb8
-		;;
-	dlink,dir-825-b1)
-		caldata_extract "caldata" 0x1000 0xeb8
-		ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
-		;;
-	*)
-		caldata_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"ath9k-eeprom-pci-0000:00:12.0.bin")
-	case $board in
-	buffalo,wzr-hp-ag300h|\
-	netgear,wndr3700|\
-	netgear,wndr3700v2|\
-	netgear,wndr3800|\
-	netgear,wndr3800ch)
-		caldata_extract "art" 0x5000 0xeb8
-		;;
-	dlink,dir-825-b1)
-		caldata_extract "caldata" 0x5000 0xeb8
-		ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
-		;;
-	*)
-		caldata_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-esac
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
deleted file mode 100644
index 91e813f121..0000000000
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ /dev/null
@@ -1,167 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-. /lib/functions/k2t.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath10k/cal-pci-0000:00:00.0.bin")
-	case $board in
-	comfast,cf-wr650ac-v1|\
-	comfast,cf-wr650ac-v2|\
-	yuncore,a770)
-		caldata_extract "art" 0x5000 0x844
-		;;
-	devolo,dvl1200e|\
-	devolo,dvl1200i|\
-	devolo,dvl1750c|\
-	devolo,dvl1750e|\
-	devolo,dvl1750i|\
-	devolo,dvl1750x)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
-		;;
-	dlink,dir-859-a1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
-		;;
-	elecom,wrc-1750ghbk2-i)
-		caldata_extract "art" 0x5000 0x844
-		;;
-	engenius,ecb1750)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
-		;;
-	engenius,epg5000|\
-	iodata,wn-ac1167dgr|\
-	iodata,wn-ac1600dgr2|\
-	sitecom,wlr-7100)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
-		;;
-	engenius,ews511ap)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
-		;;
-	glinet,gl-ar750|\
-	glinet,gl-ar750s)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
-		;;
-	glinet,gl-x750)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
-		;;
-	nec,wg800hp)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
-		;;
-	ocedo,koala|\
-	ocedo,ursus)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
-		;;
-	openmesh,om5p-ac-v2)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
-		;;
-	qihoo,c301)
-		caldata_extract "radiocfg" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
-		;;
-	tplink,archer-a7-v5|\
-	tplink,archer-c2-v3|\
-	tplink,archer-c7-v4|\
-	tplink,archer-c7-v5|\
-	tplink,archer-c25-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
-		;;
-	tplink,archer-c5-v1|\
-	tplink,archer-c7-v2)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
-		;;
-	tplink,archer-d50-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
-		;;
-	tplink,re350k-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
-		;;
-	tplink,re355-v1|\
-	tplink,re450-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
-		;;
-	tplink,re450-v2)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
-		;;
-	ubnt,unifiac-lite|\
-	ubnt,unifiac-lr|\
-	ubnt,unifiac-mesh|\
-	ubnt,unifiac-mesh-pro|\
-	ubnt,lap-120|\
-	ubnt,nanobeam-ac|\
-	ubnt,nanostation-ac|\
-	ubnt,nanostation-ac-loco|\
-	ubnt,unifiac-pro)
-		caldata_extract "EEPROM" 0x5000 0x844
-		;;
-	zyxel,nbg6716)
-		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
-		;;
-	esac
-	;;
-"ath10k/pre-cal-pci-0000:00:00.0.bin")
-	case $board in
-	comfast,cf-e313ac)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
-		;;
-	dlink,dir-842-c1|\
-	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
-	nec,wg1200cr)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	netgear,ex6400|\
-	netgear,ex7300)
-		caldata_extract "caldata" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
-		;;
-	phicomm,k2t)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(k2t_get_mac "5g_mac")
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	tplink,archer-c58-v1|\
-	tplink,archer-c59-v1|\
-	tplink,archer-c59-v2|\
-	tplink,archer-c60-v1|\
-	tplink,archer-c60-v2|\
-	tplink,archer-c6-v2)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	esac
-	;;
-*)
-	exit 1
-	;;
-esac
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
deleted file mode 100644
index 8c8b7932bc..0000000000
--- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/ash
-
-[ "$ACTION" = "add" ] || exit 0
-
-PHYNBR=${DEVPATH##*/phy}
-
-[ -n $PHYNBR ] || exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-. /lib/functions/k2t.sh
-
-board=$(board_name)
-
-case "$board" in
-	adtran,bsap1800-v2|\
-	adtran,bsap1840)
-		macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
-		;;
-	iodata,wn-ac1600dgr)
-		# There is no eeprom data for 5 GHz wlan in "art" partition
-		# which would allow to patch the macaddress
-		[ "$PHYNBR" -eq 0 ] && \
-			macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
-		;;
-	iodata,wn-ag300dgr)
-		# There is no eeprom data for 5 GHz wlan in "art" partition
-		# which would allow to patch the macaddress
-		[ "$PHYNBR" -eq 1 ] && \
-			macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
-		;;
-	phicomm,k2t)
-		# The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
-		[ "$PHYNBR" -eq 1 ] && \
-			k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
-		;;
-	trendnet,tew-823dru)
-		# set the 2.4G interface mac address to LAN MAC
-		[ "$PHYNBR" -eq 1 ] && \
-			mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
-		# set the 5G interface mac address to WAN MAC + 1
-		[ "$PHYNBR" -eq 0 ] && \
-			macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress
-		;;
-esac
diff --git a/target/linux/ath79/base-files/etc/init.d/bootcount b/target/linux/ath79/base-files/etc/init.d/bootcount
deleted file mode 100755
index 7807559d81..0000000000
--- a/target/linux/ath79/base-files/etc/init.d/bootcount
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
-	case $(board_name) in
-	adtran,bsap1800-v2|\
-	adtran,bsap1840)
-		fconfig -s -w -d $(find_mtd_part "RedBoot config") -n boot_cntb -x 0
-		;;
-	qihoo,c301)
-		local n=$(fw_printenv activeregion | cut -d = -f 2)
-		fw_setenv "image${n}trynum" 0
-		;;
-	esac
-}
diff --git a/target/linux/ath79/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/base-files/etc/uci-defaults/04_led_migration
deleted file mode 100644
index b23e5f7db6..0000000000
--- a/target/linux/ath79/base-files/etc/uci-defaults/04_led_migration
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/migrations.sh
-
-board=$(board_name)
-boardonly="${board##*,}"
-
-case "$board" in
-engenius,epg5000)
-	migrate_leds ":wlan-2g=:wlan2g" ":wlan-5g=:wlan5g"
-	;;
-tplink,archer-c25-v1|\
-tplink,archer-c58-v1|\
-tplink,archer-c59-v1|\
-tplink,archer-c59-v2|\
-tplink,archer-c60-v1|\
-tplink,archer-c60-v2|\
-tplink,archer-c7-v4|\
-tplink,archer-c7-v5)
-	migrate_leds "^$boardonly:=tp-link:"
-	;;
-tplink,archer-c7-v2)
-	migrate_leds ":blue:=:green:"
-	;;
-tplink,re355-v1)
-	migrate_leds "re355:=tp-link:"
-	;;
-tplink,re450-v1)
-	migrate_leds "re450:=tp-link:"
-	;;
-wd,mynet-n750)
-	migrate_leds "wd:=mynet-n750:"
-	;;
-esac
-
-migrations_apply system
-
-exit 0
diff --git a/target/linux/ath79/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/base-files/etc/uci-defaults/09_fix-checksum
deleted file mode 100644
index 22c9483e74..0000000000
--- a/target/linux/ath79/base-files/etc/uci-defaults/09_fix-checksum
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-
-fix_seama_header() {
-	local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
-	[ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware
-}
-
-board=$(board_name)
-
-case "$board" in
-qihoo,c301)
-	fix_seama_header
-	;;
-esac