treewide: use a single ath10k MAC patching function with checksum

While all ath10k eeproms have a checksum field, so far two
functions for patching ath10k MAC address have been present (and
been used).

This merges code to provide a single function ath10k_patch_mac
in caldata.sh, having its name in accordance with ath9k functions.
By doing so, correct MAC patching for current and future ath10k
devices should be ensured.

This patch adds checksum adjustments for several targets on
ath79 and lantiq.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 22 insertions, 22 deletions

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 9d6b643a8e..8ab0f6f6ad 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -22,54 +22,54 @@ case "$FIRMWARE" in
 	devolo,dvl1750i|\
 	devolo,dvl1750x)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
 		;;
 	dlink,dir-859-a1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
+		ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
 		;;
 	elecom,wrc-1750ghbk2-i)
 		caldata_extract "art" 0x5000 0x844
 		;;
 	engenius,ecb1750)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
+		ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
 		;;
 	engenius,epg5000|\
 	iodata,wn-ac1167dgr|\
 	iodata,wn-ac1600dgr2)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
 		;;
 	engenius,ews511ap)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
 		;;
 	glinet,gl-ar750|\
 	glinet,gl-ar750s)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
 		;;
 	glinet,gl-x750)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
 		;;
 	nec,wg800hp)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880)
+		ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
 		;;
 	ocedo,koala|\
 	ocedo,ursus)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc)
+		ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
 		;;
 	openmesh,om5p-ac-v2)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
 		;;
 	qihoo,c301)
 		caldata_extract "radiocfg" 0x5000 0x844
-		ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
+		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
 		;;
 	tplink,archer-a7-v5|\
 	tplink,archer-c2-v3|\
@@ -77,29 +77,29 @@ case "$FIRMWARE" in
 	tplink,archer-c7-v5|\
 	tplink,archer-c25-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
 		;;
 	tplink,archer-c5-v1|\
 	tplink,archer-c7-v2)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
 		;;
 	tplink,archer-d50-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
 		;;
 	tplink,re350k-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
 		;;
 	tplink,re355-v1|\
 	tplink,re450-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
 	tplink,re450-v2)
 		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
 		;;
 	ubnt,unifiac-lite|\
 	ubnt,unifiac-lr|\
@@ -118,7 +118,7 @@ case "$FIRMWARE" in
 	case $board in
 	comfast,cf-e313ac)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0x6)
+		ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
@@ -128,18 +128,18 @@ case "$FIRMWARE" in
 	dlink,dir-842-c3|\
 	nec,wg1200cr)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
+		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
 	netgear,ex6400|\
 	netgear,ex7300)
 		caldata_extract "caldata" 0x5000 0x2f20
-		ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc)
+		ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
 		;;
 	phicomm,k2t)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
+		ath10k_patch_mac $(k2t_get_mac "5g_mac")
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
@@ -150,7 +150,7 @@ case "$FIRMWARE" in
 	tplink,archer-c60-v2|\
 	tplink,archer-c6-v2)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;