diff options
| author | Ding Tengfei <dtf@comfast.cn> | 2019-03-21 19:50:01 +0800 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-03-24 01:44:27 +0100 |
| commit | acf149d531c0c263a2869abe09018e7e232a9e41 (patch) | |
| tree | 42410fbfd5e5076c0b62ae0bd55b48641974b6cf /target/linux/ath79/base-files/etc/board.d/01_leds | |
| parent | fcc716e21d7fa07c68bac8886cef122d35fbbc01 (diff) | |
| download | upstream-acf149d531c0c263a2869abe09018e7e232a9e41.tar.gz upstream-acf149d531c0c263a2869abe09018e7e232a9e41.tar.bz2 upstream-acf149d531c0c263a2869abe09018e7e232a9e41.zip | |
ath79: add support for COMFAST CF-E5/E7
COMFAST CF-E5/E7 is a outdoor 4G LTE AP with PoE support, based on
Qualcomm/Atheros QCA9531.
Short specification:
2x 10/100 Mbps Ethernet, with 24v PoE support
64 MB of RAM (DDR2)
16 MB of FLASH (SPI)
2T2R 2.4 GHz, 802.11b/g/n
built-in 1x 3 dBi antennas
output power (max): 80 mW (19 dBm)
Qucetel EC20 LTE MODULE(1x external detachable antenna)
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Ding Tengfei <dtf@comfast.cn>
[commit subject fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d/01_leds')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/01_leds | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index f7a904967d..68cff4b4b0 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -47,6 +47,14 @@ comfast,cf-e120a-v3) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100" ;; +comfast,cf-e5) + ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02" + ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth0" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:blue:rssi0" "wlan0" "1" "100" + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100" + ;; dlink,dir-859-a1) ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20" ;; |