diff options
| author | Daniel F. Dickinson <cshored@thecshore.com> | 2018-07-29 07:40:01 -0400 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-08-01 11:23:54 +0200 |
| commit | 0b7a9688ce49c60a18575b925138b100f4e8e078 (patch) | |
| tree | 4b2c30d97423644ac68f77f919aac6796740095c /target/linux/ar71xx | |
| parent | b6c8bc0981855b50b7bf22f0743bb9a75fc2b341 (diff) | |
| download | upstream-0b7a9688ce49c60a18575b925138b100f4e8e078.tar.gz upstream-0b7a9688ce49c60a18575b925138b100f4e8e078.tar.bz2 upstream-0b7a9688ce49c60a18575b925138b100f4e8e078.zip | |
ar71xx: cr3000: cleanup board definition
1) Add comments so it's clear why we did things; this may prevent
someone (e.g. me) from sinking time into fixing things that
aren't broken and/or were done for reason.
2) Drop mdio 0 probe/register; we don't use ag1xx mdio bus 0.
3) Cosmetic reording of some code (tested) that makes the defintion
more clear.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Diffstat (limited to 'target/linux/ar71xx')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c | 39 |
1 files changed, 23 insertions, 16 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c index b2fcca88fa..235b0ec769 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c @@ -21,7 +21,6 @@ */ #include <linux/gpio.h> -#include <linux/pci.h> #include <linux/phy.h> #include <linux/platform_device.h> #include <linux/ath9k_platform.h> @@ -31,7 +30,6 @@ #include <asm/mach-ath79/ath79.h> #include "common.h" -#include "dev-ap9x-pci.h" #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" @@ -58,7 +56,6 @@ #define CR3000_MAC1_OFFSET 6 #define CR3000_WMAC_CALDATA_OFFSET 0x1000 #define CR3000_WMAC_MAC_OFFSET 0x1002 -#define CR3000_PCIE_CALDATA_OFFSET 0x5000 static struct gpio_led cr3000_leds_gpio[] __initdata = { { @@ -132,27 +129,37 @@ static void __init cr3000_setup(void) /* WLAN 2GHz onboard */ ath79_register_wmac(art + CR3000_WMAC_CALDATA_OFFSET, art + CR3000_WMAC_MAC_OFFSET); - - ath79_register_mdio(1, 0x0); - ath79_register_mdio(0, 0x0); + /* FE Lan on first 4-ports of internal switch and attached to GMAC1 + * WAN Fast Ethernet interface attached to GMAC0 + * Could be configured as a 5-port switch, but we use + * the SoC capabilities to attach port 5 to a separate PHY/MAC + * theoretically this leaves future possibility of using SoC + * acceleration/offloading. + */ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - /* Lan 4-port switch attached to GMAC1 internal switch */ - ath79_init_mac(ath79_eth1_data.mac_addr, art + CR3000_MAC0_OFFSET, 0); + /* GMAC0 attached to PHY4 (port 5 of the internal switch) */ + ath79_switch_data.phy4_mii_en = 1; + /* For switch carrier ignore port 5 (wan) */ + ath79_switch_data.phy_poll_mask = 0x1; + + /* Register MII bus */ + ath79_register_mdio(1, 0x0); + + /* GMAC0 attached to PHY4 (port 5 of the internal switch) */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = 0x1; + /* LAN */ + ath79_init_mac(ath79_eth1_data.mac_addr, art + CR3000_MAC0_OFFSET, 0); ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; ath79_register_eth(1); - ath79_init_mac(ath79_eth0_data.mac_addr, art + CR3000_MAC1_OFFSET, 0); - - /* WAN Fast Ethernet interface attached to GMAC0 */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_mask = BIT(0); + /* Wan */ + ath79_init_mac(ath79_eth0_data.mac_addr, art + CR3000_MAC0_OFFSET, 1); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; ath79_register_eth(0); } |