ar71xx: merge files-3.2 to files

SVN-Revision: 30405

65 files changed, 0 insertions, 9472 deletions

diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c
deleted file mode 100644
index 1b08254861..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  Atheros AP9X reference board PCI initialization
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-
-#include "dev-ap9x-pci.h"
-#include "pci-ath9k-fixup.h"
-#include "pci.h"
-
-static struct ath9k_platform_data ap9x_wmac0_data = {
-	.led_pin = -1,
-};
-static struct ath9k_platform_data ap9x_wmac1_data = {
-	.led_pin = -1,
-};
-static char ap9x_wmac0_mac[6];
-static char ap9x_wmac1_mac[6];
-
-__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin)
-{
-	switch (wmac) {
-	case 0:
-		ap9x_wmac0_data.led_pin = pin;
-		break;
-	case 1:
-		ap9x_wmac1_data.led_pin = pin;
-		break;
-	}
-}
-
-__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val)
-{
-	switch (wmac) {
-	case 0:
-		ap9x_wmac0_data.gpio_mask = mask;
-		ap9x_wmac0_data.gpio_val = val;
-		break;
-	case 1:
-		ap9x_wmac1_data.gpio_mask = mask;
-		ap9x_wmac1_data.gpio_val = val;
-		break;
-	}
-}
-
-__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
-				     int num_leds)
-{
-	switch (wmac) {
-	case 0:
-		ap9x_wmac0_data.leds = leds;
-		ap9x_wmac0_data.num_leds = num_leds;
-		break;
-	case 1:
-		ap9x_wmac1_data.leds = leds;
-		ap9x_wmac1_data.num_leds = num_leds;
-		break;
-	}
-}
-
-static int ap91_pci_plat_dev_init(struct pci_dev *dev)
-{
-	switch (PCI_SLOT(dev->devfn)) {
-	case 0:
-		dev->dev.platform_data = &ap9x_wmac0_data;
-		break;
-	}
-
-	return 0;
-}
-
-__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr)
-{
-	if (cal_data)
-		memcpy(ap9x_wmac0_data.eeprom_data, cal_data,
-		       sizeof(ap9x_wmac0_data.eeprom_data));
-
-	if (mac_addr) {
-		memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac));
-		ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
-	}
-
-	ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init);
-	ath79_register_pci();
-
-	pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data);
-}
-
-static int ap94_pci_plat_dev_init(struct pci_dev *dev)
-{
-	switch (PCI_SLOT(dev->devfn)) {
-	case 17:
-		dev->dev.platform_data = &ap9x_wmac0_data;
-		break;
-
-	case 18:
-		dev->dev.platform_data = &ap9x_wmac1_data;
-		break;
-	}
-
-	return 0;
-}
-
-__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
-			  u8 *cal_data1, u8 *mac_addr1)
-{
-	if (cal_data0)
-		memcpy(ap9x_wmac0_data.eeprom_data, cal_data0,
-		       sizeof(ap9x_wmac0_data.eeprom_data));
-
-	if (cal_data1)
-		memcpy(ap9x_wmac1_data.eeprom_data, cal_data1,
-		       sizeof(ap9x_wmac1_data.eeprom_data));
-
-	if (mac_addr0) {
-		memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac));
-		ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
-	}
-
-	if (mac_addr1) {
-		memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac));
-		ap9x_wmac1_data.macaddr = ap9x_wmac1_mac;
-	}
-
-	ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init);
-	ath79_register_pci();
-
-	pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data);
-	pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data);
-}
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h
deleted file mode 100644
index c7f1bb9ec2..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-ap9x-pci.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  Atheros AP9X reference board PCI initialization
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_AP9X_PCI_H
-#define _ATH79_DEV_AP9X_PCI_H
-
-struct gpio_led;
-
-#if defined(CONFIG_ATH79_DEV_AP9X_PCI)
-void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin);
-void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val);
-void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
-			      int num_leds);
-
-void ap91_pci_init(u8 *cal_data, u8 *mac_addr);
-void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
-		   u8 *cal_data1, u8 *mac_addr1);
-
-#else
-static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {}
-static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac,
-					    u32 mask, u32 val) {}
-static inline void ap9x_pci_setup_wmac_leds(unsigned wmac,
-					    struct gpio_led *leds,
-					    int num_leds) {}
-
-static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {}
-static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
-				 u8 *cal_data1, u8 *mac_addr1) {}
-#endif
-
-#endif /* _ATH79_DEV_AP9X_PCI_H */
-
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c
deleted file mode 100644
index 1764147386..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  Atheros AR71xx DSA switch device support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-
-static struct platform_device ar71xx_dsa_switch_device = {
-	.name		= "dsa",
-	.id		= 0,
-};
-
-void __init ath79_register_dsa(struct device *netdev,
-			       struct device *miidev,
-			       struct dsa_platform_data *d)
-{
-	int i;
-
-	d->netdev = netdev;
-	for (i = 0; i < d->nr_chips; i++)
-		d->chip[i].mii_bus = miidev;
-
-	ar71xx_dsa_switch_device.dev.platform_data = d;
-	platform_device_register(&ar71xx_dsa_switch_device);
-}
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h
deleted file mode 100644
index 3730202e8d..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-dsa.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  Atheros AR71xx DSA switch device support
- *
- *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_DSA_H
-#define _ATH79_DEV_DSA_H
-
-#include <net/dsa.h>
-
-void ath79_register_dsa(struct device *netdev,
-			struct device *miidev,
-			struct dsa_platform_data *d);
-
-#endif /* _ATH79_DEV_DSA_H */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c
deleted file mode 100644
index 27c8a40b60..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.c
+++ /dev/null
@@ -1,971 +0,0 @@
-/*
- *  Atheros AR71xx SoC platform devices
- *
- *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  Parts of this file are based on Atheros 2.6.15 BSP
- *  Parts of this file are based on Atheros 2.6.31 BSP
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/irq.h>
-
-#include "common.h"
-#include "dev-eth.h"
-
-unsigned char ath79_mac_base[ETH_ALEN] __initdata;
-
-static struct resource ath79_mdio0_resources[] = {
-	{
-		.name	= "mdio_base",
-		.flags	= IORESOURCE_MEM,
-		.start	= AR71XX_GE0_BASE,
-		.end	= AR71XX_GE0_BASE + 0x200 - 1,
-	}
-};
-
-static struct ag71xx_mdio_platform_data ath79_mdio0_data;
-
-struct platform_device ath79_mdio0_device = {
-	.name		= "ag71xx-mdio",
-	.id		= 0,
-	.resource	= ath79_mdio0_resources,
-	.num_resources	= ARRAY_SIZE(ath79_mdio0_resources),
-	.dev = {
-		.platform_data = &ath79_mdio0_data,
-	},
-};
-
-static struct resource ath79_mdio1_resources[] = {
-	{
-		.name	= "mdio_base",
-		.flags	= IORESOURCE_MEM,
-		.start	= AR71XX_GE1_BASE,
-		.end	= AR71XX_GE1_BASE + 0x200 - 1,
-	}
-};
-
-static struct ag71xx_mdio_platform_data ath79_mdio1_data;
-
-struct platform_device ath79_mdio1_device = {
-	.name		= "ag71xx-mdio",
-	.id		= 1,
-	.resource	= ath79_mdio1_resources,
-	.num_resources	= ARRAY_SIZE(ath79_mdio1_resources),
-	.dev = {
-		.platform_data = &ath79_mdio1_data,
-	},
-};
-
-static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
-
-	t = __raw_readl(base + cfg_reg);
-	t &= ~(3 << shift);
-	t |=  (2 << shift);
-	__raw_writel(t, base + cfg_reg);
-	udelay(100);
-
-	__raw_writel(pll_val, base + pll_reg);
-
-	t |= (3 << shift);
-	__raw_writel(t, base + cfg_reg);
-	udelay(100);
-
-	t &= ~(3 << shift);
-	__raw_writel(t, base + cfg_reg);
-	udelay(100);
-
-	printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
-		(unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
-
-	iounmap(base);
-}
-
-static void __init ath79_mii_ctrl_set_if(unsigned int reg,
-					  unsigned int mii_if)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
-
-	t = __raw_readl(base + reg);
-	t &= ~(AR71XX_MII_CTRL_IF_MASK);
-	t |= (mii_if & AR71XX_MII_CTRL_IF_MASK);
-	__raw_writel(t, base + reg);
-
-	iounmap(base);
-}
-
-static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
-{
-	void __iomem *base;
-	unsigned int mii_speed;
-	u32 t;
-
-	switch (speed) {
-	case SPEED_10:
-		mii_speed =  AR71XX_MII_CTRL_SPEED_10;
-		break;
-	case SPEED_100:
-		mii_speed =  AR71XX_MII_CTRL_SPEED_100;
-		break;
-	case SPEED_1000:
-		mii_speed =  AR71XX_MII_CTRL_SPEED_1000;
-		break;
-	default:
-		BUG();
-	}
-
-	base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
-
-	t = __raw_readl(base + reg);
-	t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT);
-	t |= mii_speed  << AR71XX_MII_CTRL_SPEED_SHIFT;
-	__raw_writel(t, base + reg);
-
-	iounmap(base);
-}
-
-void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
-{
-	struct platform_device *mdio_dev;
-	struct ag71xx_mdio_platform_data *mdio_data;
-	unsigned int max_id;
-
-	if (ath79_soc == ATH79_SOC_AR9341 ||
-	    ath79_soc == ATH79_SOC_AR9342 ||
-	    ath79_soc == ATH79_SOC_AR9344)
-		max_id = 1;
-	else
-		max_id = 0;
-
-	if (id > max_id) {
-		printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id);
-		return;
-	}
-
-	switch (ath79_soc) {
-	case ATH79_SOC_AR7241:
-	case ATH79_SOC_AR9330:
-	case ATH79_SOC_AR9331:
-		mdio_dev = &ath79_mdio1_device;
-		mdio_data = &ath79_mdio1_data;
-		break;
-
-	case ATH79_SOC_AR9341:
-	case ATH79_SOC_AR9342:
-	case ATH79_SOC_AR9344:
-		if (id == 0) {
-			mdio_dev = &ath79_mdio0_device;
-			mdio_data = &ath79_mdio0_data;
-		} else {
-			mdio_dev = &ath79_mdio1_device;
-			mdio_data = &ath79_mdio1_data;
-		}
-		break;
-
-	case ATH79_SOC_AR7242:
-		ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG,
-			       AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000,
-			       AR71XX_ETH0_PLL_SHIFT);
-		/* fall through */
-	default:
-		mdio_dev = &ath79_mdio0_device;
-		mdio_data = &ath79_mdio0_data;
-		break;
-	}
-
-	mdio_data->phy_mask = phy_mask;
-
-	switch (ath79_soc) {
-	case ATH79_SOC_AR7240:
-	case ATH79_SOC_AR7241:
-	case ATH79_SOC_AR9330:
-	case ATH79_SOC_AR9331:
-		mdio_data->is_ar7240 = 1;
-		break;
-
-	case ATH79_SOC_AR9341:
-	case ATH79_SOC_AR9342:
-	case ATH79_SOC_AR9344:
-		if (id == 1)
-			mdio_data->is_ar7240 = 1;
-		break;
-
-	default:
-		break;
-	}
-
-	platform_device_register(mdio_dev);
-}
-
-struct ath79_eth_pll_data ath79_eth0_pll_data;
-struct ath79_eth_pll_data ath79_eth1_pll_data;
-
-static u32 ath79_get_eth_pll(unsigned int mac, int speed)
-{
-	struct ath79_eth_pll_data *pll_data;
-	u32 pll_val;
-
-	switch (mac) {
-	case 0:
-		pll_data = &ath79_eth0_pll_data;
-		break;
-	case 1:
-		pll_data = &ath79_eth1_pll_data;
-		break;
-	default:
-		BUG();
-	}
-
-	switch (speed) {
-	case SPEED_10:
-		pll_val = pll_data->pll_10;
-		break;
-	case SPEED_100:
-		pll_val = pll_data->pll_100;
-		break;
-	case SPEED_1000:
-		pll_val = pll_data->pll_1000;
-		break;
-	default:
-		BUG();
-	}
-
-	return pll_val;
-}
-
-static void ath79_set_speed_ge0(int speed)
-{
-	u32 val = ath79_get_eth_pll(0, speed);
-
-	ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
-			val, AR71XX_ETH0_PLL_SHIFT);
-	ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
-}
-
-static void ath79_set_speed_ge1(int speed)
-{
-	u32 val = ath79_get_eth_pll(1, speed);
-
-	ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
-			 val, AR71XX_ETH1_PLL_SHIFT);
-	ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
-}
-
-static void ar724x_set_speed_ge0(int speed)
-{
-	/* TODO */
-}
-
-static void ar724x_set_speed_ge1(int speed)
-{
-	/* TODO */
-}
-
-static void ar7242_set_speed_ge0(int speed)
-{
-	u32 val = ath79_get_eth_pll(0, speed);
-	void __iomem *base;
-
-	base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
-	__raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK);
-	iounmap(base);
-}
-
-static void ar91xx_set_speed_ge0(int speed)
-{
-	u32 val = ath79_get_eth_pll(0, speed);
-
-	ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK,
-			 val, AR913X_ETH0_PLL_SHIFT);
-	ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
-}
-
-static void ar91xx_set_speed_ge1(int speed)
-{
-	u32 val = ath79_get_eth_pll(1, speed);
-
-	ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK,
-			 val, AR913X_ETH1_PLL_SHIFT);
-	ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
-}
-
-static void ar933x_set_speed_ge0(int speed)
-{
-	/* TODO */
-}
-
-static void ar933x_set_speed_ge1(int speed)
-{
-	/* TODO */
-}
-
-static void ar934x_set_speed_ge0(int speed)
-{
-	/* TODO */
-}
-
-static void ar934x_set_speed_ge1(int speed)
-{
-	/* TODO */
-}
-
-static void ath79_ddr_flush_ge0(void)
-{
-	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
-}
-
-static void ath79_ddr_flush_ge1(void)
-{
-	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1);
-}
-
-static void ar724x_ddr_flush_ge0(void)
-{
-	ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0);
-}
-
-static void ar724x_ddr_flush_ge1(void)
-{
-	ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1);
-}
-
-static void ar91xx_ddr_flush_ge0(void)
-{
-	ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0);
-}
-
-static void ar91xx_ddr_flush_ge1(void)
-{
-	ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1);
-}
-
-static void ar933x_ddr_flush_ge0(void)
-{
-	ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0);
-}
-
-static void ar933x_ddr_flush_ge1(void)
-{
-	ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
-}
-
-static void ar934x_ddr_flush_ge0(void)
-{
-	ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE0);
-}
-
-static void ar934x_ddr_flush_ge1(void)
-{
-	ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE1);
-}
-
-static struct resource ath79_eth0_resources[] = {
-	{
-		.name	= "mac_base",
-		.flags	= IORESOURCE_MEM,
-		.start	= AR71XX_GE0_BASE,
-		.end	= AR71XX_GE0_BASE + 0x200 - 1,
-	}, {
-		.name	= "mac_irq",
-		.flags	= IORESOURCE_IRQ,
-		.start	= ATH79_CPU_IRQ_GE0,
-		.end	= ATH79_CPU_IRQ_GE0,
-	},
-};
-
-struct ag71xx_platform_data ath79_eth0_data = {
-	.reset_bit	= AR71XX_RESET_GE0_MAC,
-};
-
-struct platform_device ath79_eth0_device = {
-	.name		= "ag71xx",
-	.id		= 0,
-	.resource	= ath79_eth0_resources,
-	.num_resources	= ARRAY_SIZE(ath79_eth0_resources),
-	.dev = {
-		.platform_data = &ath79_eth0_data,
-	},
-};
-
-static struct resource ath79_eth1_resources[] = {
-	{
-		.name	= "mac_base",
-		.flags	= IORESOURCE_MEM,
-		.start	= AR71XX_GE1_BASE,
-		.end	= AR71XX_GE1_BASE + 0x200 - 1,
-	}, {
-		.name	= "mac_irq",
-		.flags	= IORESOURCE_IRQ,
-		.start	= ATH79_CPU_IRQ_GE1,
-		.end	= ATH79_CPU_IRQ_GE1,
-	},
-};
-
-struct ag71xx_platform_data ath79_eth1_data = {
-	.reset_bit	= AR71XX_RESET_GE1_MAC,
-};
-
-struct platform_device ath79_eth1_device = {
-	.name		= "ag71xx",
-	.id		= 1,
-	.resource	= ath79_eth1_resources,
-	.num_resources	= ARRAY_SIZE(ath79_eth1_resources),
-	.dev = {
-		.platform_data = &ath79_eth1_data,
-	},
-};
-
-struct ag71xx_switch_platform_data ath79_switch_data;
-
-#define AR71XX_PLL_VAL_1000	0x00110000
-#define AR71XX_PLL_VAL_100	0x00001099
-#define AR71XX_PLL_VAL_10	0x00991099
-
-#define AR724X_PLL_VAL_1000	0x00110000
-#define AR724X_PLL_VAL_100	0x00001099
-#define AR724X_PLL_VAL_10	0x00991099
-
-#define AR7242_PLL_VAL_1000	0x16000000
-#define AR7242_PLL_VAL_100	0x00000101
-#define AR7242_PLL_VAL_10	0x00001616
-
-#define AR913X_PLL_VAL_1000	0x1a000000
-#define AR913X_PLL_VAL_100	0x13000a44
-#define AR913X_PLL_VAL_10	0x00441099
-
-#define AR933X_PLL_VAL_1000	0x00110000
-#define AR933X_PLL_VAL_100	0x00001099
-#define AR933X_PLL_VAL_10	0x00991099
-
-#define AR934X_PLL_VAL_1000	0x00110000
-#define AR934X_PLL_VAL_100	0x00001099
-#define AR934X_PLL_VAL_10	0x00991099
-
-static void __init ath79_init_eth_pll_data(unsigned int id)
-{
-	struct ath79_eth_pll_data *pll_data;
-	u32 pll_10, pll_100, pll_1000;
-
-	switch (id) {
-	case 0:
-		pll_data = &ath79_eth0_pll_data;
-		break;
-	case 1:
-		pll_data = &ath79_eth1_pll_data;
-		break;
-	default:
-		BUG();
-	}
-
-	switch (ath79_soc) {
-	case ATH79_SOC_AR7130:
-	case ATH79_SOC_AR7141:
-	case ATH79_SOC_AR7161:
-		pll_10 = AR71XX_PLL_VAL_10;
-		pll_100 = AR71XX_PLL_VAL_100;
-		pll_1000 = AR71XX_PLL_VAL_1000;
-		break;
-
-	case ATH79_SOC_AR7240:
-	case ATH79_SOC_AR7241:
-		pll_10 = AR724X_PLL_VAL_10;
-		pll_100 = AR724X_PLL_VAL_100;
-		pll_1000 = AR724X_PLL_VAL_1000;
-		break;
-
-	case ATH79_SOC_AR7242:
-		pll_10 = AR7242_PLL_VAL_10;
-		pll_100 = AR7242_PLL_VAL_100;
-		pll_1000 = AR7242_PLL_VAL_1000;
-		break;
-
-	case ATH79_SOC_AR9130:
-	case ATH79_SOC_AR9132:
-		pll_10 = AR913X_PLL_VAL_10;
-		pll_100 = AR913X_PLL_VAL_100;
-		pll_1000 = AR913X_PLL_VAL_1000;
-		break;
-
-	case ATH79_SOC_AR9330:
-	case ATH79_SOC_AR9331:
-		pll_10 = AR933X_PLL_VAL_10;
-		pll_100 = AR933X_PLL_VAL_100;
-		pll_1000 = AR933X_PLL_VAL_1000;
-		break;
-
-	case ATH79_SOC_AR9341:
-	case ATH79_SOC_AR9342:
-	case ATH79_SOC_AR9344:
-		pll_10 = AR934X_PLL_VAL_10;
-		pll_100 = AR934X_PLL_VAL_100;
-		pll_1000 = AR934X_PLL_VAL_1000;
-		break;
-
-	default:
-		BUG();
-	}
-
-	if (!pll_data->pll_10)
-		pll_data->pll_10 = pll_10;
-
-	if (!pll_data->pll_100)
-		pll_data->pll_100 = pll_100;
-
-	if (!pll_data->pll_1000)
-		pll_data->pll_1000 = pll_1000;
-}
-
-static int __init ath79_setup_phy_if_mode(unsigned int id,
-					   struct ag71xx_platform_data *pdata)
-{
-	unsigned int mii_if;
-
-	switch (id) {
-	case 0:
-		switch (ath79_soc) {
-		case ATH79_SOC_AR7130:
-		case ATH79_SOC_AR7141:
-		case ATH79_SOC_AR7161:
-		case ATH79_SOC_AR9130:
-		case ATH79_SOC_AR9132:
-			switch (pdata->phy_if_mode) {
-			case PHY_INTERFACE_MODE_MII:
-				mii_if = AR71XX_MII0_CTRL_IF_MII;
-				break;
-			case PHY_INTERFACE_MODE_GMII:
-				mii_if = AR71XX_MII0_CTRL_IF_GMII;
-				break;
-			case PHY_INTERFACE_MODE_RGMII:
-				mii_if = AR71XX_MII0_CTRL_IF_RGMII;
-				break;
-			case PHY_INTERFACE_MODE_RMII:
-				mii_if = AR71XX_MII0_CTRL_IF_RMII;
-				break;
-			default:
-				return -EINVAL;
-			}
-			ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if);
-			break;
-
-		case ATH79_SOC_AR7240:
-		case ATH79_SOC_AR7241:
-		case ATH79_SOC_AR9330:
-		case ATH79_SOC_AR9331:
-			pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
-			break;
-
-		case ATH79_SOC_AR7242:
-			/* FIXME */
-
-		case ATH79_SOC_AR9341:
-		case ATH79_SOC_AR9342:
-		case ATH79_SOC_AR9344:
-			switch (pdata->phy_if_mode) {
-			case PHY_INTERFACE_MODE_MII:
-			case PHY_INTERFACE_MODE_GMII:
-			case PHY_INTERFACE_MODE_RGMII:
-			case PHY_INTERFACE_MODE_RMII:
-				break;
-			default:
-				return -EINVAL;
-			}
-			break;
-
-		default:
-			BUG();
-		}
-		break;
-	case 1:
-		switch (ath79_soc) {
-		case ATH79_SOC_AR7130:
-		case ATH79_SOC_AR7141:
-		case ATH79_SOC_AR7161:
-		case ATH79_SOC_AR9130:
-		case ATH79_SOC_AR9132:
-			switch (pdata->phy_if_mode) {
-			case PHY_INTERFACE_MODE_RMII:
-				mii_if = AR71XX_MII1_CTRL_IF_RMII;
-				break;
-			case PHY_INTERFACE_MODE_RGMII:
-				mii_if = AR71XX_MII1_CTRL_IF_RGMII;
-				break;
-			default:
-				return -EINVAL;
-			}
-			ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if);
-			break;
-
-		case ATH79_SOC_AR7240:
-		case ATH79_SOC_AR7241:
-		case ATH79_SOC_AR9330:
-		case ATH79_SOC_AR9331:
-			pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
-			break;
-
-		case ATH79_SOC_AR7242:
-			/* FIXME */
-
-		case ATH79_SOC_AR9341:
-		case ATH79_SOC_AR9342:
-		case ATH79_SOC_AR9344:
-			switch (pdata->phy_if_mode) {
-			case PHY_INTERFACE_MODE_MII:
-			case PHY_INTERFACE_MODE_GMII:
-				break;
-			default:
-				return -EINVAL;
-			}
-			break;
-
-		default:
-			BUG();
-		}
-		break;
-	}
-
-	return 0;
-}
-
-static int ath79_eth_instance __initdata;
-void __init ath79_register_eth(unsigned int id)
-{
-	struct platform_device *pdev;
-	struct ag71xx_platform_data *pdata;
-	int err;
-
-	if (id > 1) {
-		printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
-		return;
-	}
-
-	ath79_init_eth_pll_data(id);
-
-	if (id == 0)
-		pdev = &ath79_eth0_device;
-	else
-		pdev = &ath79_eth1_device;
-
-	pdata = pdev->dev.platform_data;
-
-	err = ath79_setup_phy_if_mode(id, pdata);
-	if (err) {
-		printk(KERN_ERR
-		       "ar71xx: invalid PHY interface mode for GE%u\n", id);
-		return;
-	}
-
-	switch (ath79_soc) {
-	case ATH79_SOC_AR7130:
-		if (id == 0) {
-			pdata->ddr_flush = ath79_ddr_flush_ge0;
-			pdata->set_speed = ath79_set_speed_ge0;
-		} else {
-			pdata->ddr_flush = ath79_ddr_flush_ge1;
-			pdata->set_speed = ath79_set_speed_ge1;
-		}
-		break;
-
-	case ATH79_SOC_AR7141:
-	case ATH79_SOC_AR7161:
-		if (id == 0) {
-			pdata->ddr_flush = ath79_ddr_flush_ge0;
-			pdata->set_speed = ath79_set_speed_ge0;
-		} else {
-			pdata->ddr_flush = ath79_ddr_flush_ge1;
-			pdata->set_speed = ath79_set_speed_ge1;
-		}
-		pdata->has_gbit = 1;
-		break;
-
-	case ATH79_SOC_AR7242:
-		if (id == 0) {
-			pdata->reset_bit |= AR724X_RESET_GE0_MDIO |
-					    AR71XX_RESET_GE0_PHY;
-			pdata->ddr_flush = ar724x_ddr_flush_ge0;
-			pdata->set_speed = ar7242_set_speed_ge0;
-		} else {
-			pdata->reset_bit |= AR724X_RESET_GE1_MDIO |
-					    AR71XX_RESET_GE1_PHY;
-			pdata->ddr_flush = ar724x_ddr_flush_ge1;
-			pdata->set_speed = ar724x_set_speed_ge1;
-		}
-		pdata->has_gbit = 1;
-		pdata->is_ar724x = 1;
-
-		if (!pdata->fifo_cfg1)
-			pdata->fifo_cfg1 = 0x0010ffff;
-		if (!pdata->fifo_cfg2)
-			pdata->fifo_cfg2 = 0x015500aa;
-		if (!pdata->fifo_cfg3)
-			pdata->fifo_cfg3 = 0x01f00140;
-		break;
-
-	case ATH79_SOC_AR7241:
-		if (id == 0)
-			pdata->reset_bit |= AR724X_RESET_GE0_MDIO;
-		else
-			pdata->reset_bit |= AR724X_RESET_GE1_MDIO;
-		/* fall through */
-	case ATH79_SOC_AR7240:
-		if (id == 0) {
-			pdata->reset_bit |= AR71XX_RESET_GE0_PHY;
-			pdata->ddr_flush = ar724x_ddr_flush_ge0;
-			pdata->set_speed = ar724x_set_speed_ge0;
-
-			pdata->phy_mask = BIT(4);
-		} else {
-			pdata->reset_bit |= AR71XX_RESET_GE1_PHY;
-			pdata->ddr_flush = ar724x_ddr_flush_ge1;
-			pdata->set_speed = ar724x_set_speed_ge1;
-
-			pdata->speed = SPEED_1000;
-			pdata->duplex = DUPLEX_FULL;
-			pdata->switch_data = &ath79_switch_data;
-		}
-		pdata->has_gbit = 1;
-		pdata->is_ar724x = 1;
-		if (ath79_soc == ATH79_SOC_AR7240)
-			pdata->is_ar7240 = 1;
-
-		if (!pdata->fifo_cfg1)
-			pdata->fifo_cfg1 = 0x0010ffff;
-		if (!pdata->fifo_cfg2)
-			pdata->fifo_cfg2 = 0x015500aa;
-		if (!pdata->fifo_cfg3)
-			pdata->fifo_cfg3 = 0x01f00140;
-		break;
-
-	case ATH79_SOC_AR9130:
-		if (id == 0) {
-			pdata->ddr_flush = ar91xx_ddr_flush_ge0;
-			pdata->set_speed = ar91xx_set_speed_ge0;
-		} else {
-			pdata->ddr_flush = ar91xx_ddr_flush_ge1;
-			pdata->set_speed = ar91xx_set_speed_ge1;
-		}
-		pdata->is_ar91xx = 1;
-		break;
-
-	case ATH79_SOC_AR9132:
-		if (id == 0) {
-			pdata->ddr_flush = ar91xx_ddr_flush_ge0;
-			pdata->set_speed = ar91xx_set_speed_ge0;
-		} else {
-			pdata->ddr_flush = ar91xx_ddr_flush_ge1;
-			pdata->set_speed = ar91xx_set_speed_ge1;
-		}
-		pdata->is_ar91xx = 1;
-		pdata->has_gbit = 1;
-		break;
-
-	case ATH79_SOC_AR9330:
-	case ATH79_SOC_AR9331:
-		if (id == 0) {
-			pdata->reset_bit = AR933X_RESET_GE0_MAC |
-					   AR933X_RESET_GE0_MDIO;
-			pdata->ddr_flush = ar933x_ddr_flush_ge0;
-			pdata->set_speed = ar933x_set_speed_ge0;
-
-			pdata->phy_mask = BIT(4);
-		} else {
-			pdata->reset_bit = AR933X_RESET_GE1_MAC |
-					   AR933X_RESET_GE1_MDIO;
-			pdata->ddr_flush = ar933x_ddr_flush_ge1;
-			pdata->set_speed = ar933x_set_speed_ge1;
-
-			pdata->speed = SPEED_1000;
-			pdata->duplex = DUPLEX_FULL;
-			pdata->switch_data = &ath79_switch_data;
-		}
-
-		pdata->has_gbit = 1;
-		pdata->is_ar724x = 1;
-
-		if (!pdata->fifo_cfg1)
-			pdata->fifo_cfg1 = 0x0010ffff;
-		if (!pdata->fifo_cfg2)
-			pdata->fifo_cfg2 = 0x015500aa;
-		if (!pdata->fifo_cfg3)
-			pdata->fifo_cfg3 = 0x01f00140;
-		break;
-
-	case ATH79_SOC_AR9341:
-	case ATH79_SOC_AR9342:
-	case ATH79_SOC_AR9344:
-		if (id == 0) {
-			pdata->reset_bit = AR934X_RESET_GE0_MAC |
-					   AR934X_RESET_GE0_MDIO;
-			pdata->ddr_flush =ar934x_ddr_flush_ge0;
-			pdata->set_speed = ar934x_set_speed_ge0;
-		} else {
-			pdata->reset_bit = AR934X_RESET_GE1_MAC |
-					   AR934X_RESET_GE1_MDIO;
-			pdata->ddr_flush = ar934x_ddr_flush_ge1;
-			pdata->set_speed = ar934x_set_speed_ge1;
-
-			pdata->switch_data = &ath79_switch_data;
-		}
-
-		pdata->has_gbit = 1;
-		pdata->is_ar724x = 1;
-
-		if (!pdata->fifo_cfg1)
-			pdata->fifo_cfg1 = 0x0010ffff;
-		if (!pdata->fifo_cfg2)
-			pdata->fifo_cfg2 = 0x015500aa;
-		if (!pdata->fifo_cfg3)
-			pdata->fifo_cfg3 = 0x01f00140;
-		break;
-
-	default:
-		BUG();
-	}
-
-	switch (pdata->phy_if_mode) {
-	case PHY_INTERFACE_MODE_GMII:
-	case PHY_INTERFACE_MODE_RGMII:
-		if (!pdata->has_gbit) {
-			printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
-					id);
-			return;
-		}
-		/* fallthrough */
-	default:
-		break;
-	}
-
-	if (!is_valid_ether_addr(pdata->mac_addr)) {
-		random_ether_addr(pdata->mac_addr);
-		printk(KERN_DEBUG
-			"ar71xx: using random MAC address for eth%d\n",
-			ath79_eth_instance);
-	}
-
-	if (pdata->mii_bus_dev == NULL) {
-		switch (ath79_soc) {
-		case ATH79_SOC_AR9341:
-		case ATH79_SOC_AR9342:
-		case ATH79_SOC_AR9344:
-			if (id == 0)
-				pdata->mii_bus_dev = &ath79_mdio0_device.dev;
-			else
-				pdata->mii_bus_dev = &ath79_mdio1_device.dev;
-			break;
-
-		case ATH79_SOC_AR7241:
-		case ATH79_SOC_AR9330:
-		case ATH79_SOC_AR9331:
-			pdata->mii_bus_dev = &ath79_mdio1_device.dev;
-			break;
-
-		default:
-			pdata->mii_bus_dev = &ath79_mdio0_device.dev;
-			break;
-		}
-	}
-
-	/* Reset the device */
-	ath79_device_reset_set(pdata->reset_bit);
-	mdelay(100);
-
-	ath79_device_reset_clear(pdata->reset_bit);
-	mdelay(100);
-
-	platform_device_register(pdev);
-	ath79_eth_instance++;
-}
-
-void __init ath79_set_mac_base(unsigned char *mac)
-{
-	memcpy(ath79_mac_base, mac, ETH_ALEN);
-}
-
-void __init ath79_parse_mac_addr(char *mac_str)
-{
-	u8 tmp[ETH_ALEN];
-	int t;
-
-	t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-			&tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
-
-	if (t != ETH_ALEN)
-		t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
-			&tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
-
-	if (t == ETH_ALEN)
-		ath79_set_mac_base(tmp);
-	else
-		printk(KERN_DEBUG "ar71xx: failed to parse mac address "
-				"\"%s\"\n", mac_str);
-}
-
-static int __init ath79_ethaddr_setup(char *str)
-{
-	ath79_parse_mac_addr(str);
-	return 1;
-}
-__setup("ethaddr=", ath79_ethaddr_setup);
-
-static int __init ath79_kmac_setup(char *str)
-{
-	ath79_parse_mac_addr(str);
-	return 1;
-}
-__setup("kmac=", ath79_kmac_setup);
-
-void __init ath79_init_mac(unsigned char *dst, const unsigned char *src,
-			    int offset)
-{
-	int t;
-
-	if (!is_valid_ether_addr(src)) {
-		memset(dst, '\0', ETH_ALEN);
-		return;
-	}
-
-	t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]);
-	t += offset;
-
-	dst[0] = src[0];
-	dst[1] = src[1];
-	dst[2] = src[2];
-	dst[3] = (t >> 16) & 0xff;
-	dst[4] = (t >> 8) & 0xff;
-	dst[5] = t & 0xff;
-}
-
-void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src)
-{
-	int i;
-
-	if (!is_valid_ether_addr(src)) {
-		memset(dst, '\0', ETH_ALEN);
-		return;
-	}
-
-	for (i = 0; i < ETH_ALEN; i++)
-		dst[i] = src[i];
-	dst[0] |= 0x02;
-}
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h
deleted file mode 100644
index 4c010ef74e..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-eth.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  Atheros AR71xx SoC device definitions
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_ETH_H
-#define _ATH79_DEV_ETH_H
-
-#include <asm/mach-ath79/ag71xx_platform.h>
-
-struct platform_device;
-
-extern unsigned char ath79_mac_base[] __initdata;
-void ath79_parse_mac_addr(char *mac_str);
-void ath79_init_mac(unsigned char *dst, const unsigned char *src,
-		    int offset);
-void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
-
-struct ath79_eth_pll_data {
-	u32	pll_10;
-	u32	pll_100;
-	u32	pll_1000;
-};
-
-extern struct ath79_eth_pll_data ath79_eth0_pll_data;
-extern struct ath79_eth_pll_data ath79_eth1_pll_data;
-
-extern struct ag71xx_platform_data ath79_eth0_data;
-extern struct ag71xx_platform_data ath79_eth1_data;
-extern struct platform_device ath79_eth0_device;
-extern struct platform_device ath79_eth1_device;
-void ath79_register_eth(unsigned int id);
-
-extern struct ag71xx_switch_platform_data ath79_switch_data;
-
-extern struct platform_device ath79_mdio0_device;
-extern struct platform_device ath79_mdio1_device;
-void ath79_register_mdio(unsigned int id, u32 phy_mask);
-
-#endif /* _ATH79_DEV_ETH_H */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c
deleted file mode 100644
index 9ac19d83ae..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include "dev-spi.h"
-#include "dev-m25p80.h"
-
-static struct ath79_spi_controller_data ath79_spi0_cdata =
-{
-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-	.cs_line = 0,
-};
-
-static struct ath79_spi_controller_data ath79_spi1_cdata =
-{
-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-	.cs_line = 1,
-};
-
-static struct spi_board_info ath79_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.controller_data = &ath79_spi0_cdata,
-	},
-	{
-		.bus_num	= 0,
-		.chip_select	= 1,
-		.max_speed_hz   = 25000000,
-		.modalias	= "m25p80",
-		.controller_data = &ath79_spi1_cdata,
-	}
-};
-
-static struct ath79_spi_platform_data ath79_spi_data;
-
-void __init ath79_register_m25p80(struct flash_platform_data *pdata)
-{
-	ath79_spi_data.bus_num = 0;
-	ath79_spi_data.num_chipselect = 1;
-	ath79_spi_info[0].platform_data = pdata;
-	ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1);
-}
-
-static struct flash_platform_data *multi_pdata;
-
-static struct mtd_info *concat_devs[2] = { NULL, NULL };
-static struct work_struct mtd_concat_work;
-
-static void mtd_concat_add_work(struct work_struct *work)
-{
-	struct mtd_info *mtd;
-
-	mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash");
-
-	mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts);
-}
-
-static void mtd_concat_add(struct mtd_info *mtd)
-{
-	static bool registered = false;
-
-	if (registered)
-		return;
-
-	if (!strcmp(mtd->name, "spi0.0"))
-		concat_devs[0] = mtd;
-	else if (!strcmp(mtd->name, "spi0.1"))
-		concat_devs[1] = mtd;
-	else
-		return;
-
-	if (!concat_devs[0] || !concat_devs[1])
-		return;
-
-	registered = true;
-	INIT_WORK(&mtd_concat_work, mtd_concat_add_work);
-	schedule_work(&mtd_concat_work);
-}
-
-static void mtd_concat_remove(struct mtd_info *mtd)
-{
-}
-
-static void add_mtd_concat_notifier(void)
-{
-	static struct mtd_notifier not = {
-		.add = mtd_concat_add,
-		.remove = mtd_concat_remove,
-	};
-
-	register_mtd_user(&not);
-}
-
-
-void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata)
-{
-	multi_pdata = pdata;
-	add_mtd_concat_notifier();
-	ath79_spi_data.bus_num = 0;
-	ath79_spi_data.num_chipselect = 2;
-	ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
-}
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h
deleted file mode 100644
index 637b41a7d8..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/dev-m25p80.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_M25P80_H
-#define _ATH79_DEV_M25P80_H
-
-#include <linux/spi/flash.h>
-
-void ath79_register_m25p80(struct flash_platform_data *pdata) __init;
-void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init;
-
-#endif /* _ATH79_DEV_M25P80_H */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c
deleted file mode 100644
index f7315a7493..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-ap96.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  ALFA Network AP96 board support
- *
- *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define ALFA_AP96_GPIO_PCIE_RESET	2
-#define ALFA_AP96_GPIO_SIM_DETECT	3
-#define ALFA_AP96_GPIO_MICROSD_CD	4
-#define ALFA_AP96_GPIO_PCIE_W_DISABLE	5
-
-#define ALFA_AP96_GPIO_BUTTON_RESET	11
-
-#define ALFA_AP96_KEYS_POLL_INTERVAL		20	/* msecs */
-#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL	(3 * ALFA_AP96_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
-	{
-		.desc		= "Reset button",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= ALFA_AP96_GPIO_BUTTON_RESET,
-		.active_low	= 1,
-	}
-};
-
-static int alfa_ap96_mmc_get_cd(struct device *dev)
-{
-        return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD);
-}
-
-static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
-	.get_cd		= alfa_ap96_mmc_get_cd,
-	.caps		= MMC_CAP_NEEDS_POLL,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct ath79_spi_controller_data ap96_spi0_cdata = {
-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-	.cs_line = 0,
-};
-
-static struct ath79_spi_controller_data ap96_spi1_cdata = {
-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-	.cs_line = 1,
-};
-
-static struct ath79_spi_controller_data ap96_spi2_cdata = {
-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-	.cs_line = 2,
-};
-
-static struct spi_board_info alfa_ap96_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.controller_data = &ap96_spi0_cdata
-	}, {
-		.bus_num	= 0,
-		.chip_select	= 1,
-		.max_speed_hz	= 25000000,
-		.modalias	= "mmc_spi",
-		.platform_data	= &alfa_ap96_mmc_data,
-		.controller_data = &ap96_spi1_cdata
-	}, {
-		.bus_num	= 0,
-		.chip_select	= 2,
-		.max_speed_hz	= 6250000,
-		.modalias	= "rtc-pcf2123",
-		.controller_data = &ap96_spi2_cdata
-	},
-};
-
-static struct ath79_spi_platform_data alfa_ap96_spi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 3,
-};
-
-static void __init alfa_ap96_gpio_setup(void)
-{
-	ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
-				   AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
-	gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
-	gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
-	gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
-	gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
-	gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
-	gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
-}
-
-#define ALFA_AP96_WAN_PHYMASK	BIT(4)
-#define ALFA_AP96_LAN_PHYMASK	BIT(5)
-#define ALFA_AP96_MDIO_PHYMASK	(ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
-
-static void __init alfa_ap96_init(void)
-{
-	alfa_ap96_gpio_setup();
-
-	ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
-	ath79_eth1_pll_data.pll_1000 = 0x110000;
-
-	ath79_register_eth(0);
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
-	ath79_eth1_pll_data.pll_1000 = 0x110000;
-
-	ath79_register_eth(1);
-
-	ath79_register_pci();
-	ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
-			   ARRAY_SIZE(alfa_ap96_spi_info));
-
-	ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(alfa_ap96_gpio_keys),
-					 alfa_ap96_gpio_keys);
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
-	     alfa_ap96_init);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c
deleted file mode 100644
index d37e63fe12..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-alfa-nx.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *  ALFA Network N2/N5 board support
- *
- *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define ALFA_NX_GPIO_LED_2		17
-#define ALFA_NX_GPIO_LED_3		16
-#define ALFA_NX_GPIO_LED_5		12
-#define ALFA_NX_GPIO_LED_6		8
-#define ALFA_NX_GPIO_LED_7		6
-#define ALFA_NX_GPIO_LED_8		7
-
-#define ALFA_NX_GPIO_BTN_RESET		11
-
-#define ALFA_NX_KEYS_POLL_INTERVAL	20	/* msecs */
-#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL)
-
-#define ALFA_NX_MAC0_OFFSET		0
-#define ALFA_NX_MAC1_OFFSET		6
-#define ALFA_NX_CALDATA_OFFSET		0x1000
-
-static struct mtd_partition alfa_nx_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x040000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x050000,
-		.size		= 0x600000,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x650000,
-		.size		= 0x190000,
-	}, {
-		.name		= "nvram",
-		.offset		= 0x7e0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "art",
-		.offset		= 0x7f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x050000,
-		.size		= 0x780000,
-	}
-};
-
-static struct flash_platform_data alfa_nx_flash_data = {
-	.parts		= alfa_nx_partitions,
-	.nr_parts	= ARRAY_SIZE(alfa_nx_partitions),
-};
-
-static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = {
-	{
-		.desc		= "Reset button",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= ALFA_NX_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_led alfa_nx_leds_gpio[] __initdata = {
-	{
-		.name		= "alfa:green:led_2",
-		.gpio		= ALFA_NX_GPIO_LED_2,
-		.active_low	= 1,
-	}, {
-		.name		= "alfa:green:led_3",
-		.gpio		= ALFA_NX_GPIO_LED_3,
-		.active_low	= 1,
-	}, {
-		.name		= "alfa:red:led_5",
-		.gpio		= ALFA_NX_GPIO_LED_5,
-		.active_low	= 1,
-	}, {
-		.name		= "alfa:amber:led_6",
-		.gpio		= ALFA_NX_GPIO_LED_6,
-		.active_low	= 1,
-	}, {
-		.name		= "alfa:green:led_7",
-		.gpio		= ALFA_NX_GPIO_LED_7,
-		.active_low	= 1,
-	}, {
-		.name		= "alfa:green:led_8",
-		.gpio		= ALFA_NX_GPIO_LED_8,
-		.active_low	= 1,
-	}
-};
-
-static void __init alfa_nx_setup(void)
-{
-	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
-				  AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				  AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				  AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				  AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				  AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	ath79_register_m25p80(&alfa_nx_flash_data);
-
-	ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio),
-				 alfa_nx_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(alfa_nx_gpio_keys),
-					alfa_nx_gpio_keys);
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr,
-		       art + ALFA_NX_MAC0_OFFSET, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr,
-		       art + ALFA_NX_MAC1_OFFSET, 0);
-
-	/* WAN port */
-	ath79_register_eth(0);
-	/* LAN port */
-	ath79_register_eth(1);
-
-	ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5",
-	     alfa_nx_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c
deleted file mode 100644
index fa3cefb64c..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-all0258n.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  Allnet ALL0258N support
- *
- *  Copyright (C) 2011 Daniel Golle <dgolle@allnet.de>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-/* found via /sys/gpio/... try and error */
-#define ALL0258N_GPIO_BTN_RESET		1
-#define ALL0258N_GPIO_LED_RSSIHIGH	13
-#define ALL0258N_GPIO_LED_RSSIMEDIUM	15
-#define ALL0258N_GPIO_LED_RSSILOW	14
-
-/* defaults taken from others machs */
-#define ALL0258N_KEYS_POLL_INTERVAL	20	/* msecs */
-#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
-
-/* showed up in the original firmware's bootlog */
-#define ALL0258N_SEC_PHYMASK BIT(3)
-
-/*
- * from U-Boot bootargs of original firmware:
- * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART)
- * we use a more OpenWrt-friendly layout now:
- * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART)
- */
-static struct mtd_partition all0258n_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x040000,
-		.size		= 0x010000,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x050000,
-		.size		= 0x0E0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x130000,
-		.size		= 0x540000,
-	}, {
-		.name		= "failsafe",
-		.offset		= 0x670000,
-		.size		= 0x180000,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x050000,
-		.size		= 0x620000,
-	}, {
-		.name		= "art",
-		.offset		= 0x7F0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data all0258n_flash_data = {
-	.parts		= all0258n_partitions,
-	.nr_parts	= ARRAY_SIZE(all0258n_partitions),
-};
-
-static struct gpio_led all0258n_leds_gpio[] __initdata = {
-	{
-		.name		= "all0258n:green:rssihigh",
-		.gpio		= ALL0258N_GPIO_LED_RSSIHIGH,
-		.active_low	= 1,
-	}, {
-		.name		= "all0258n:yellow:rssimedium",
-		.gpio		= ALL0258N_GPIO_LED_RSSIMEDIUM,
-		.active_low	= 1,
-	}, {
-		.name		= "all0258n:red:rssilow",
-		.gpio		= ALL0258N_GPIO_LED_RSSILOW,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= ALL0258N_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static void __init all0258n_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
-	u8 *ee =  (u8 *) KSEG1ADDR(0x1f7f1000);
-
-	ath79_register_m25p80(&all0258n_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
-				 all0258n_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(all0258n_gpio_keys),
-					all0258n_gpio_keys);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
-	ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
-	     all0258n_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap113.c
deleted file mode 100644
index 178815cf91..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap113.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- *  Atheros AP113 board support
- *
- *  Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/flash.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "pci.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP113_GPIO_LED_USB		0
-#define AP113_GPIO_LED_STATUS		1
-#define AP113_GPIO_LED_ST		11
-
-#define AP113_GPIO_BTN_JUMPSTART	12
-
-#define AP113_KEYS_POLL_INTERVAL	20	/* msecs */
-#define AP113_KEYS_DEBOUNCE_INTERVAL	(3 * AP113_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition ap113_parts[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "rootfs",
-		.offset		= 0x010000,
-		.size		= 0x300000,
-	},
-	{
-		.name		= "uImage",
-		.offset		= 0x300000,
-		.size		= 0x3e0000,
-	},
-	{
-		.name		= "NVRAM",
-		.offset		= 0x3e0000,
-		.size		= 0x010000,
-	},
-	{
-		.name		= "ART",
-		.offset		= 0x3f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-#define ap113_nr_parts		ARRAY_SIZE(ap113_parts)
-
-static struct flash_platform_data ap113_flash_data = {
-	.parts		= ap113_parts,
-	.nr_parts	= ap113_nr_parts,
-};
-
-static struct gpio_led ap113_leds_gpio[] __initdata = {
-	{
-		.name		= "ap113:green:usb",
-		.gpio		= AP113_GPIO_LED_USB,
-		.active_low	= 1,
-	},
-	{
-		.name		= "ap113:green:status",
-		.gpio		= AP113_GPIO_LED_STATUS,
-		.active_low	= 1,
-	},
-	{
-		.name		= "ap113:green:st",
-		.gpio		= AP113_GPIO_LED_ST,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
-	{
-		.desc		= "jumpstart button",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP113_GPIO_BTN_JUMPSTART,
-		.active_low	= 1,
-	},
-};
-
-static void __init ap113_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	ath79_register_m25p80(&ap113_flash_data);
-
-	ath79_register_mdio(0, ~BIT(0));
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_register_eth(0);
-
-	ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(ap113_gpio_keys),
-					 ap113_gpio_keys);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
-					ap113_leds_gpio);
-
-	ath79_register_pci();
-
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
-	     ap113_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c
deleted file mode 100644
index 8519a9d9a6..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap83.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- *  Atheros AP83 board support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/vsc7385.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define AP83_GPIO_LED_WLAN	6
-#define AP83_GPIO_LED_POWER	14
-#define AP83_GPIO_LED_JUMPSTART	15
-#define AP83_GPIO_BTN_JUMPSTART	12
-#define AP83_GPIO_BTN_RESET	21
-
-#define AP83_050_GPIO_VSC7385_CS	1
-#define AP83_050_GPIO_VSC7385_MISO	3
-#define AP83_050_GPIO_VSC7385_MOSI	16
-#define AP83_050_GPIO_VSC7385_SCK	17
-
-#define AP83_KEYS_POLL_INTERVAL		20	/* msecs */
-#define AP83_KEYS_DEBOUNCE_INTERVAL	(3 * AP83_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition ap83_flash_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x040000,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x060000,
-		.size		= 0x140000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x1a0000,
-		.size		= 0x650000,
-	}, {
-		.name		= "art",
-		.offset		= 0x7f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x060000,
-		.size		= 0x790000,
-	}
-};
-
-static struct physmap_flash_data ap83_flash_data = {
-	.width		= 2,
-	.parts		= ap83_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(ap83_flash_partitions),
-};
-
-static struct resource ap83_flash_resources[] = {
-	[0] = {
-		.start	= AR71XX_SPI_BASE,
-		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ap83_flash_device = {
-	.name		= "ar91xx-flash",
-	.id		= -1,
-	.resource	= ap83_flash_resources,
-	.num_resources	= ARRAY_SIZE(ap83_flash_resources),
-	.dev		= {
-		.platform_data = &ap83_flash_data,
-	}
-};
-
-static struct gpio_led ap83_leds_gpio[] __initdata = {
-	{
-		.name		= "ap83:green:jumpstart",
-		.gpio		= AP83_GPIO_LED_JUMPSTART,
-		.active_low	= 0,
-	}, {
-		.name		= "ap83:green:power",
-		.gpio		= AP83_GPIO_LED_POWER,
-		.active_low	= 0,
-	}, {
-		.name		= "ap83:green:wlan",
-		.gpio		= AP83_GPIO_LED_WLAN,
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_button ap83_gpio_keys[] __initdata = {
-	{
-		.desc		= "soft_reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP83_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "jumpstart",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP83_GPIO_BTN_JUMPSTART,
-		.active_low	= 1,
-	}
-};
-
-static struct resource ap83_040_spi_resources[] = {
-	[0] = {
-		.start	= AR71XX_SPI_BASE,
-		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ap83_040_spi_device = {
-	.name		= "ap83-spi",
-	.id		= 0,
-	.resource	= ap83_040_spi_resources,
-	.num_resources	= ARRAY_SIZE(ap83_040_spi_resources),
-};
-
-static struct spi_gpio_platform_data ap83_050_spi_data = {
-	.miso	= AP83_050_GPIO_VSC7385_MISO,
-	.mosi	= AP83_050_GPIO_VSC7385_MOSI,
-	.sck	= AP83_050_GPIO_VSC7385_SCK,
-	.num_chipselect = 1,
-};
-
-static struct platform_device ap83_050_spi_device = {
-	.name		= "spi_gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ap83_050_spi_data,
-	}
-};
-
-static void ap83_vsc7385_reset(void)
-{
-	ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
-	udelay(10);
-	ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
-	mdelay(50);
-}
-
-static struct vsc7385_platform_data ap83_vsc7385_data = {
-	.reset		= ap83_vsc7385_reset,
-	.ucode_name	= "vsc7385_ucode_ap83.bin",
-	.mac_cfg = {
-		.tx_ipg		= 6,
-		.bit2		= 0,
-		.clk_sel	= 3,
-	},
-};
-
-static struct spi_board_info ap83_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "spi-vsc7385",
-		.platform_data	= &ap83_vsc7385_data,
-		.controller_data = (void *) AP83_050_GPIO_VSC7385_CS,
-	}
-};
-
-static void __init ap83_generic_setup(void)
-{
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_mdio(0, 0xfffffffe);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = 0x1;
-
-	ath79_register_eth(0);
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.speed = SPEED_1000;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-
-	ath79_eth1_pll_data.pll_1000 = 0x1f000000;
-
-	ath79_register_eth(1);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
-					ap83_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(ap83_gpio_keys),
-					 ap83_gpio_keys);
-
-	ath79_register_usb();
-
-	ath79_register_wmac(eeprom, NULL);
-
-	platform_device_register(&ap83_flash_device);
-
-	spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
-}
-
-static void ap83_040_flash_lock(struct platform_device *pdev)
-{
-	ath79_flash_acquire();
-}
-
-static void ap83_040_flash_unlock(struct platform_device *pdev)
-{
-	ath79_flash_release();
-}
-
-static void __init ap83_040_setup(void)
-{
-	ap83_flash_data.lock = ap83_040_flash_lock;
-	ap83_flash_data.unlock = ap83_040_flash_unlock;
-	ap83_generic_setup();
-	platform_device_register(&ap83_040_spi_device);
-}
-
-static void __init ap83_050_setup(void)
-{
-	ap83_generic_setup();
-	platform_device_register(&ap83_050_spi_device);
-}
-
-static void __init ap83_setup(void)
-{
-	u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244);
-	unsigned int board_version;
-
-	board_version = (unsigned int)(board_id[0] - '0');
-	board_version += ((unsigned int)(board_id[1] - '0')) * 10;
-
-	switch (board_version) {
-	case 40:
-		ap83_040_setup();
-		break;
-	case 50:
-		ap83_050_setup();
-		break;
-	default:
-		printk(KERN_WARNING "AP83-%03u board is not yet supported\n",
-		       board_version);
-	}
-}
-
-MIPS_MACHINE(ATH79_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c
deleted file mode 100644
index 9ab36cc1cb..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap96.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- *  Atheros AP96 board support
- *
- *  Copyright (C) 2009 Marco Porsch
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2010 Atheros Communications
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP96_GPIO_LED_12_GREEN		0
-#define AP96_GPIO_LED_3_GREEN		1
-#define AP96_GPIO_LED_2_GREEN		2
-#define AP96_GPIO_LED_WPS_GREEN		4
-#define AP96_GPIO_LED_5_GREEN		5
-#define AP96_GPIO_LED_4_ORANGE		6
-
-/* Reset button - next to the power connector */
-#define AP96_GPIO_BTN_RESET		3
-/* WPS button - next to a led on right */
-#define AP96_GPIO_BTN_WPS		8
-
-#define AP96_KEYS_POLL_INTERVAL		20	/* msecs */
-#define AP96_KEYS_DEBOUNCE_INTERVAL	(3 * AP96_KEYS_POLL_INTERVAL)
-
-#define AP96_WMAC0_MAC_OFFSET		0x120c
-#define AP96_WMAC1_MAC_OFFSET		0x520c
-#define AP96_CALDATA0_OFFSET		0x1000
-#define AP96_CALDATA1_OFFSET		0x5000
-
-static struct mtd_partition ap96_partitions[] = {
-	{
-		.name		= "uboot",
-		.offset		= 0,
-		.size		= 0x030000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "env",
-		.offset		= 0x030000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x040000,
-		.size		= 0x600000,
-	}, {
-		.name		= "uImage",
-		.offset		= 0x640000,
-		.size		= 0x1b0000,
-	}, {
-		.name		= "caldata",
-		.offset		= 0x7f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data ap96_flash_data = {
-	.parts		= ap96_partitions,
-	.nr_parts	= ARRAY_SIZE(ap96_partitions),
-};
-
-/*
- * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
- * below (from left to right on the board). Led 1 seems to be on whenever the
- * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
- * others are green.
- *
- * In addition, there is one led next to a button on the right side for WPS.
- */
-static struct gpio_led ap96_leds_gpio[] __initdata = {
-	{
-		.name		= "ap96:green:led2",
-		.gpio		= AP96_GPIO_LED_2_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "ap96:green:led3",
-		.gpio		= AP96_GPIO_LED_3_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "ap96:orange:led4",
-		.gpio		= AP96_GPIO_LED_4_ORANGE,
-		.active_low	= 1,
-	}, {
-		.name		= "ap96:green:led5",
-		.gpio		= AP96_GPIO_LED_5_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "ap96:green:led12",
-		.gpio		= AP96_GPIO_LED_12_GREEN,
-		.active_low	= 1,
-	}, { /* next to a button on right */
-		.name		= "ap96:green:wps",
-		.gpio		= AP96_GPIO_LED_WPS_GREEN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button ap96_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP96_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP96_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-#define AP96_WAN_PHYMASK 0x10
-#define AP96_LAN_PHYMASK 0x0f
-
-static void __init ap96_setup(void)
-{
-	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK));
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK;
-
-	ath79_eth1_pll_data.pll_1000 = 0x1f000000;
-
-	ath79_register_eth(1);
-
-	ath79_register_usb();
-
-	ath79_register_m25p80(&ap96_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
-					ap96_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(ap96_gpio_keys),
-					 ap96_gpio_keys);
-
-	ap94_pci_init(art + AP96_CALDATA0_OFFSET,
-		      art + AP96_WMAC0_MAC_OFFSET,
-		      art + AP96_CALDATA1_OFFSET,
-		      art + AP96_WMAC1_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c
deleted file mode 100644
index 281129b787..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-aw-nr580.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *  AzureWave AW-NR580 board support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define AW_NR580_GPIO_LED_READY_RED	0
-#define AW_NR580_GPIO_LED_WLAN		1
-#define AW_NR580_GPIO_LED_READY_GREEN	2
-#define AW_NR580_GPIO_LED_WPS_GREEN	4
-#define AW_NR580_GPIO_LED_WPS_AMBER	5
-
-#define AW_NR580_GPIO_BTN_WPS		3
-#define AW_NR580_GPIO_BTN_RESET		11
-
-#define AW_NR580_KEYS_POLL_INTERVAL	20	/* msecs */
-#define AW_NR580_KEYS_DEBOUNCE_INTERVAL	(3 * AW_NR580_KEYS_POLL_INTERVAL)
-
-static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
-	{
-		.name		= "aw-nr580:red:ready",
-		.gpio		= AW_NR580_GPIO_LED_READY_RED,
-		.active_low	= 0,
-	}, {
-		.name		= "aw-nr580:green:ready",
-		.gpio		= AW_NR580_GPIO_LED_READY_GREEN,
-		.active_low	= 0,
-	}, {
-		.name		= "aw-nr580:green:wps",
-		.gpio		= AW_NR580_GPIO_LED_WPS_GREEN,
-		.active_low	= 0,
-	}, {
-		.name		= "aw-nr580:amber:wps",
-		.gpio		= AW_NR580_GPIO_LED_WPS_AMBER,
-		.active_low	= 0,
-	}, {
-		.name		= "aw-nr580:green:wlan",
-		.gpio		= AW_NR580_GPIO_LED_WLAN,
-		.active_low	= 0,
-	}
-};
-
-static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AW_NR580_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AW_NR580_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static const char *aw_nr580_part_probes[] = {
-	"RedBoot",
-	NULL,
-};
-
-static struct flash_platform_data aw_nr580_flash_data = {
-	.part_probes	= aw_nr580_part_probes,
-};
-
-static void __init aw_nr580_setup(void)
-{
-	ath79_register_mdio(0, 0x0);
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-
-	ath79_register_pci();
-
-	ath79_register_m25p80(&aw_nr580_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
-				 aw_nr580_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(aw_nr580_gpio_keys),
-					aw_nr580_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
-	     aw_nr580_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c
deleted file mode 100644
index 931a7292e2..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- *  D-Link DIR-600 rev. A1 board support
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DIR_600_A1_GPIO_LED_WPS			0
-#define DIR_600_A1_GPIO_LED_POWER_AMBER		1
-#define DIR_600_A1_GPIO_LED_POWER_GREEN		6
-#define DIR_600_A1_GPIO_LED_LAN1		13
-#define DIR_600_A1_GPIO_LED_LAN2		14
-#define DIR_600_A1_GPIO_LED_LAN3		15
-#define DIR_600_A1_GPIO_LED_LAN4		16
-#define DIR_600_A1_GPIO_LED_WAN_AMBER		7
-#define DIR_600_A1_GPIO_LED_WAN_GREEN		17
-
-#define DIR_600_A1_GPIO_BTN_RESET		8
-#define DIR_600_A1_GPIO_BTN_WPS			12
-
-#define DIR_600_A1_KEYS_POLL_INTERVAL		20	/* msecs */
-#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL)
-
-#define DIR_600_A1_NVRAM_ADDR	0x1f030000
-#define DIR_600_A1_NVRAM_SIZE	0x10000
-
-static struct mtd_partition dir_600_a1_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x030000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "nvram",
-		.offset		= 0x030000,
-		.size		= 0x010000,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x040000,
-		.size		= 0x0e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x120000,
-		.size		= 0x2c0000,
-	}, {
-		.name		= "mac",
-		.offset		= 0x3e0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "art",
-		.offset		= 0x3f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x040000,
-		.size		= 0x3a0000,
-	}
-};
-
-static struct flash_platform_data dir_600_a1_flash_data = {
-	.parts		= dir_600_a1_partitions,
-	.nr_parts	= ARRAY_SIZE(dir_600_a1_partitions),
-};
-
-static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
-	{
-		.name		= "d-link:green:power",
-		.gpio		= DIR_600_A1_GPIO_LED_POWER_GREEN,
-	}, {
-		.name		= "d-link:amber:power",
-		.gpio		= DIR_600_A1_GPIO_LED_POWER_AMBER,
-	}, {
-		.name		= "d-link:amber:wan",
-		.gpio		= DIR_600_A1_GPIO_LED_WAN_AMBER,
-	}, {
-		.name		= "d-link:green:wan",
-		.gpio		= DIR_600_A1_GPIO_LED_WAN_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:green:lan1",
-		.gpio		= DIR_600_A1_GPIO_LED_LAN1,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:green:lan2",
-		.gpio		= DIR_600_A1_GPIO_LED_LAN2,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:green:lan3",
-		.gpio		= DIR_600_A1_GPIO_LED_LAN3,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:green:lan4",
-		.gpio		= DIR_600_A1_GPIO_LED_LAN4,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:blue:wps",
-		.gpio		= DIR_600_A1_GPIO_LED_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DIR_600_A1_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DIR_600_A1_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static void __init dir_600_a1_setup(void)
-{
-	const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 mac_buff[6];
-	u8 *mac = NULL;
-
-	if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
-				       "lan_mac=", mac_buff) == 0) {
-		ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
-		ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
-		mac = mac_buff;
-	}
-
-	ath79_register_m25p80(&dir_600_a1_flash_data);
-
-	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
-				 dir_600_a1_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(dir_600_a1_gpio_keys),
-					dir_600_a1_gpio_keys);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
-	ath79_register_mdio(0, 0x0);
-
-	/* LAN ports */
-	ath79_register_eth(1);
-
-	/* WAN port */
-	ath79_register_eth(0);
-
-	ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
-	     dir_600_a1_setup);
-
-static void __init dir_615_e4_setup(void)
-{
-	dir_600_a1_setup();
-	ap9x_pci_setup_wmac_led_pin(0, 1);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
-	     dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c
deleted file mode 100644
index b15fc6814c..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-c1.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- *  D-Link DIR-615 rev C1 board support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1	/* ORANGE:STATUS:TRICOLOR */
-#define DIR_615C1_GPIO_LED_BLUE_WPS	3	/* BLUE:WPS */
-#define DIR_615C1_GPIO_LED_GREEN_WAN	4       /* GREEN:WAN:TRICOLOR */
-#define DIR_615C1_GPIO_LED_GREEN_WANCPU	5       /* GREEN:WAN:CPU:TRICOLOR */
-#define DIR_615C1_GPIO_LED_GREEN_WLAN	6	/* GREEN:WLAN */
-#define DIR_615C1_GPIO_LED_GREEN_STATUS	14	/* GREEN:STATUS:TRICOLOR */
-#define DIR_615C1_GPIO_LED_ORANGE_WAN	15	/* ORANGE:WAN:TRICOLOR */
-
-/* buttons may need refinement */
-
-#define DIR_615C1_GPIO_BTN_WPS		12
-#define DIR_615C1_GPIO_BTN_RESET	21
-
-#define DIR_615C1_KEYS_POLL_INTERVAL	20	/* msecs */
-#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL)
-
-#define DIR_615C1_CONFIG_ADDR		0x1f020000
-#define DIR_615C1_CONFIG_SIZE		0x10000
-
-static struct mtd_partition dir_615c1_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "config",
-		.offset		= 0x020000,
-		.size		= 0x010000,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x030000,
-		.size		= 0x0e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x110000,
-		.size		= 0x2e0000,
-	}, {
-		.name		= "art",
-		.offset		= 0x3f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x030000,
-		.size		= 0x3c0000,
-	}
-};
-
-static struct flash_platform_data dir_615c1_flash_data = {
-	.parts		= dir_615c1_partitions,
-	.nr_parts	= ARRAY_SIZE(dir_615c1_partitions),
-};
-
-static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
-	{
-		.name		= "d-link:orange:status",
-		.gpio		= DIR_615C1_GPIO_LED_ORANGE_STATUS,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:blue:wps",
-		.gpio		= DIR_615C1_GPIO_LED_BLUE_WPS,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:green:wan",
-		.gpio		= DIR_615C1_GPIO_LED_GREEN_WAN,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:green:wancpu",
-		.gpio		= DIR_615C1_GPIO_LED_GREEN_WANCPU,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:green:wlan",
-		.gpio		= DIR_615C1_GPIO_LED_GREEN_WLAN,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:green:status",
-		.gpio		= DIR_615C1_GPIO_LED_GREEN_STATUS,
-		.active_low     = 1,
-	}, {
-		.name		= "d-link:orange:wan",
-		.gpio		= DIR_615C1_GPIO_LED_ORANGE_WAN,
-		.active_low	= 1,
-	}
-
-};
-
-static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DIR_615C1_GPIO_BTN_RESET,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DIR_615C1_GPIO_BTN_WPS,
-	}
-};
-
-#define DIR_615C1_LAN_PHYMASK	BIT(0)
-#define DIR_615C1_WAN_PHYMASK	BIT(4)
-#define DIR_615C1_MDIO_MASK	(~(DIR_615C1_LAN_PHYMASK | \
-				   DIR_615C1_WAN_PHYMASK))
-
-static void __init dir_615c1_setup(void)
-{
-	const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 mac[6];
-	u8 *wlan_mac = NULL;
-
-	if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
-				       "lan_mac=", mac) == 0) {
-		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-		wlan_mac = mac;
-	}
-
-	ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
-
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(&dir_615c1_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
-				 dir_615c1_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(dir_615c1_gpio_keys),
-					dir_615c1_gpio_keys);
-
-	ath79_register_wmac(eeprom, wlan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
-	     dir_615c1_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c
deleted file mode 100644
index ab973ebfb8..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-825-b1.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- *  D-Link DIR-825 rev. B1 board support
- *
- *  Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
- *
- *  based on mach-wndr3700.c
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define DIR825B1_GPIO_LED_BLUE_USB		0
-#define DIR825B1_GPIO_LED_ORANGE_POWER		1
-#define DIR825B1_GPIO_LED_BLUE_POWER		2
-#define DIR825B1_GPIO_LED_BLUE_WPS		4
-#define DIR825B1_GPIO_LED_ORANGE_PLANET		6
-#define DIR825B1_GPIO_LED_BLUE_PLANET		11
-
-#define DIR825B1_GPIO_BTN_RESET			3
-#define DIR825B1_GPIO_BTN_WPS			8
-
-#define DIR825B1_GPIO_RTL8366_SDA		5
-#define DIR825B1_GPIO_RTL8366_SCK		7
-
-#define DIR825B1_KEYS_POLL_INTERVAL		20	/* msecs */
-#define DIR825B1_KEYS_DEBOUNCE_INTERVAL		(3 * DIR825B1_KEYS_POLL_INTERVAL)
-
-#define DIR825B1_CAL_LOCATION_0			0x1f661000
-#define DIR825B1_CAL_LOCATION_1			0x1f665000
-
-#define DIR825B1_MAC_LOCATION_0			0x1f66ffa0
-#define DIR825B1_MAC_LOCATION_1			0x1f66ffb4
-
-static struct mtd_partition dir825b1_partitions[] = {
-	{
-		.name		= "uboot",
-		.offset		= 0,
-		.size		= 0x040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "config",
-		.offset		= 0x040000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x050000,
-		.size		= 0x610000,
-	}, {
-		.name		= "caldata",
-		.offset		= 0x660000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "unknown",
-		.offset		= 0x670000,
-		.size		= 0x190000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data dir825b1_flash_data = {
-	.parts          = dir825b1_partitions,
-	.nr_parts       = ARRAY_SIZE(dir825b1_partitions),
-};
-
-static struct gpio_led dir825b1_leds_gpio[] __initdata = {
-	{
-		.name		= "d-link:blue:usb",
-		.gpio		= DIR825B1_GPIO_LED_BLUE_USB,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:orange:power",
-		.gpio		= DIR825B1_GPIO_LED_ORANGE_POWER,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:blue:power",
-		.gpio		= DIR825B1_GPIO_LED_BLUE_POWER,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:blue:wps",
-		.gpio		= DIR825B1_GPIO_LED_BLUE_WPS,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:orange:planet",
-		.gpio		= DIR825B1_GPIO_LED_ORANGE_PLANET,
-		.active_low	= 1,
-	}, {
-		.name		= "d-link:blue:planet",
-		.gpio		= DIR825B1_GPIO_LED_BLUE_PLANET,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DIR825B1_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= DIR825B1_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
-	{ .reg = 0x06, .val = 0x0108 },
-};
-
-static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
-	.gpio_sda	= DIR825B1_GPIO_RTL8366_SDA,
-	.gpio_sck	= DIR825B1_GPIO_RTL8366_SCK,
-	.num_initvals	= ARRAY_SIZE(dir825b1_rtl8366s_initvals),
-	.initvals	= dir825b1_rtl8366s_initvals,
-};
-
-static struct platform_device dir825b1_rtl8366s_device = {
-	.name		= RTL8366S_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &dir825b1_rtl8366s_data,
-	}
-};
-
-static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr)
-{
-	int ret;
-	u8 *src = (u8 *)KSEG1ADDR(src_addr);
-
-	ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-		     &dest[0], &dest[1], &dest[2],
-		     &dest[3], &dest[4], &dest[5]);
-
-	if (ret != ETH_ALEN)
-		memset(dest, 0, ETH_ALEN);
-}
-
-static void __init dir825b1_setup(void)
-{
-	u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
-
-	dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0);
-	dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1);
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
-	ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_pll_data.pll_1000 = 0x11110000;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
-	ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = 0x10;
-	ath79_eth1_pll_data.pll_1000 = 0x11110000;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(&dir825b1_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
-				 dir825b1_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(dir825b1_gpio_keys),
-					dir825b1_gpio_keys);
-
-	ath79_register_usb();
-
-	platform_device_register(&dir825b1_rtl8366s_device);
-
-	ap9x_pci_setup_wmac_led_pin(0, 5);
-	ap9x_pci_setup_wmac_led_pin(1, 5);
-
-	ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1,
-		      (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
-	     dir825b1_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c
deleted file mode 100644
index cbd201994d..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-eap7660d.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- *  Senao EAP7660D board support
- *
- *  Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com>
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/ath5k_platform.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define EAP7660D_KEYS_POLL_INTERVAL	20	/* msecs */
-#define EAP7660D_KEYS_DEBOUNCE_INTERVAL	(3 * EAP7660D_KEYS_POLL_INTERVAL)
-
-#define EAP7660D_GPIO_DS4		7
-#define EAP7660D_GPIO_DS5		2
-#define EAP7660D_GPIO_DS7		0
-#define EAP7660D_GPIO_DS8		4
-#define EAP7660D_GPIO_SW1		3
-#define EAP7660D_GPIO_SW3		8
-#define EAP7660D_PHYMASK		BIT(20)
-#define EAP7660D_BOARDCONFIG		0x1F7F0000
-#define EAP7660D_GBIC_MAC_OFFSET	0x1000
-#define EAP7660D_WMAC0_MAC_OFFSET	0x1010
-#define EAP7660D_WMAC1_MAC_OFFSET	0x1016
-#define EAP7660D_WMAC0_CALDATA_OFFSET	0x2000
-#define EAP7660D_WMAC1_CALDATA_OFFSET	0x3000
-
-#ifdef CONFIG_PCI
-static struct ath5k_platform_data eap7660d_wmac0_data;
-static struct ath5k_platform_data eap7660d_wmac1_data;
-static char eap7660d_wmac0_mac[6];
-static char eap7660d_wmac1_mac[6];
-static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
-static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
-
-static int eap7660d_pci_plat_dev_init(struct pci_dev *dev)
-{
-	switch (PCI_SLOT(dev->devfn)) {
-	case 17:
-		dev->dev.platform_data = &eap7660d_wmac0_data;
-		break;
-
-	case 18:
-		dev->dev.platform_data = &eap7660d_wmac1_data;
-		break;
-	}
-
-	return 0;
-}
-
-void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
-			      u8 *cal_data1, u8 *mac_addr1)
-{
-	if (cal_data0 && *cal_data0 == 0xa55a) {
-		memcpy(eap7660d_wmac0_eeprom, cal_data0,
-			ATH5K_PLAT_EEP_MAX_WORDS);
-		eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom;
-	}
-
-	if (cal_data1 && *cal_data1 == 0xa55a) {
-		memcpy(eap7660d_wmac1_eeprom, cal_data1,
-			ATH5K_PLAT_EEP_MAX_WORDS);
-		eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom;
-	}
-
-	if (mac_addr0) {
-		memcpy(eap7660d_wmac0_mac, mac_addr0,
-			sizeof(eap7660d_wmac0_mac));
-		eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac;
-	}
-
-	if (mac_addr1) {
-		memcpy(eap7660d_wmac1_mac, mac_addr1,
-			sizeof(eap7660d_wmac1_mac));
-		eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac;
-	}
-
-	ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init);
-	ath79_register_pci();
-}
-#else
-static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
-				     u8 *cal_data1, u8 *mac_addr1)
-{
-}
-#endif /* CONFIG_PCI */
-
-static struct gpio_led eap7660d_leds_gpio[] __initdata = {
-	{
-		.name		= "eap7660d:green:ds8",
-		.gpio		= EAP7660D_GPIO_DS8,
-		.active_low	= 0,
-	},
-	{
-		.name		= "eap7660d:green:ds5",
-		.gpio		= EAP7660D_GPIO_DS5,
-		.active_low	= 0,
-	},
-	{
-		.name		= "eap7660d:green:ds7",
-		.gpio		= EAP7660D_GPIO_DS7,
-		.active_low	= 0,
-	},
-	{
-		.name		= "eap7660d:green:ds4",
-		.gpio		= EAP7660D_GPIO_DS4,
-		.active_low	= 0,
-	}
-};
-
-static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= EAP7660D_GPIO_SW1,
-		.active_low	= 1,
-	},
-	{
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= EAP7660D_GPIO_SW3,
-		.active_low	= 1,
-	}
-};
-
-static const char *eap7660d_part_probes[] = {
-	"RedBoot",
-	NULL,
-};
-
-static struct flash_platform_data eap7660d_flash_data = {
-	.part_probes	= eap7660d_part_probes,
-};
-
-static void __init eap7660d_setup(void)
-{
-	u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG);
-
-	ath79_register_mdio(0, ~EAP7660D_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr,
-			boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = EAP7660D_PHYMASK;
-	ath79_register_eth(0);
-	ath79_register_m25p80(&eap7660d_flash_data);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
-					eap7660d_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(eap7660d_gpio_keys),
-					 eap7660d_gpio_keys);
-	eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET,
-			  boardconfig + EAP7660D_WMAC0_MAC_OFFSET,
-			  boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET,
-			  boardconfig + EAP7660D_WMAC1_MAC_OFFSET);
-};
-
-MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
-	     eap7660d_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c
deleted file mode 100644
index 45dc0f618c..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-hornet-ub.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  ALFA NETWORKS Hornet-UB board support
- *
- *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define HORNET_UB_GPIO_LED_WLAN		0
-#define HORNET_UB_GPIO_LED_USB		1
-#define HORNET_UB_GPIO_LED_LAN		13
-#define HORNET_UB_GPIO_LED_WAN		17
-#define HORNET_UB_GPIO_LED_WPS		27
-
-#define HORNET_UB_GPIO_BTN_RESET	11
-#define HORNET_UB_GPIO_BTN_WPS		12
-
-#define HORNET_UB_GPIO_USB_POWER	26
-
-#define HORNET_UB_KEYS_POLL_INTERVAL	20	/* msecs */
-#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL	(3 * HORNET_UB_KEYS_POLL_INTERVAL)
-
-#define HORNET_UB_MAC0_OFFSET		0x0000
-#define HORNET_UB_MAC1_OFFSET		0x0006
-#define HORNET_UB_CALDATA_OFFSET	0x1000
-
-static struct gpio_led hornet_ub_leds_gpio[] __initdata = {
-	{
-		.name		= "alfa:blue:lan",
-		.gpio		= HORNET_UB_GPIO_LED_LAN,
-		.active_low	= 0,
-	},
-	{
-		.name		= "alfa:blue:usb",
-		.gpio		= HORNET_UB_GPIO_LED_USB,
-		.active_low	= 0,
-	},
-	{
-		.name		= "alfa:blue:wan",
-		.gpio		= HORNET_UB_GPIO_LED_WAN,
-		.active_low	= 1,
-	},
-	{
-		.name		= "alfa:blue:wlan",
-		.gpio		= HORNET_UB_GPIO_LED_WLAN,
-		.active_low	= 0,
-	},
-	{
-		.name		= "alfa:blue:wps",
-		.gpio		= HORNET_UB_GPIO_LED_WPS,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
-	{
-		.desc		= "WPS button",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= HORNET_UB_GPIO_BTN_WPS,
-		.active_low	= 1,
-	},
-	{
-		.desc		= "Reset button",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= HORNET_UB_GPIO_BTN_RESET,
-		.active_low	= 0,
-	}
-};
-
-static void __init hornet_ub_gpio_setup(void)
-{
-	u32 t;
-
-	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				     AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				     AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				     AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				     AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
-	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-
-	gpio_request(HORNET_UB_GPIO_USB_POWER, "USB power");
-	gpio_direction_output(HORNET_UB_GPIO_USB_POWER, 1);
-}
-
-static void __init hornet_ub_setup(void)
-{
-	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	hornet_ub_gpio_setup();
-
-	ath79_register_m25p80(NULL);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio),
-					hornet_ub_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(hornet_ub_gpio_keys),
-					 hornet_ub_gpio_keys);
-
-	ath79_init_mac(ath79_eth1_data.mac_addr,
-			art + HORNET_UB_MAC0_OFFSET, 0);
-	ath79_init_mac(ath79_eth0_data.mac_addr,
-			art + HORNET_UB_MAC1_OFFSET, 0);
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_register_eth(1);
-	ath79_register_eth(0);
-
-	ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL);
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB",
-	     hornet_ub_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c
deleted file mode 100644
index 46c12c1be3..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ja76pf.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- *  jjPlus JA76PF board support
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define JA76PF_KEYS_POLL_INTERVAL	20	/* msecs */
-#define JA76PF_KEYS_DEBOUNCE_INTERVAL	(3 * JA76PF_KEYS_POLL_INTERVAL)
-
-#define JA76PF_GPIO_I2C_SCL		0
-#define JA76PF_GPIO_I2C_SDA		1
-#define JA76PF_GPIO_LED_1		5
-#define JA76PF_GPIO_LED_2		4
-#define JA76PF_GPIO_LED_3		3
-#define JA76PF_GPIO_BTN_RESET		11
-
-static struct gpio_led ja76pf_leds_gpio[] __initdata = {
-	{
-		.name		= "ja76pf:green:led1",
-		.gpio		= JA76PF_GPIO_LED_1,
-		.active_low	= 1,
-	}, {
-		.name		= "ja76pf:green:led2",
-		.gpio		= JA76PF_GPIO_LED_2,
-		.active_low	= 1,
-	}, {
-		.name		= "ja76pf:green:led3",
-		.gpio		= JA76PF_GPIO_LED_3,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= JA76PF_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
-	.sda_pin	= JA76PF_GPIO_I2C_SDA,
-	.scl_pin	= JA76PF_GPIO_I2C_SCL,
-};
-
-static struct platform_device ja76pf_i2c_gpio_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev = {
-		.platform_data  = &ja76pf_i2c_gpio_data,
-	}
-};
-
-static const char *ja76pf_part_probes[] = {
-	"RedBoot",
-	NULL,
-};
-
-static struct flash_platform_data ja76pf_flash_data = {
-	.part_probes	= ja76pf_part_probes,
-};
-
-#define JA76PF_WAN_PHYMASK	(1 << 4)
-#define JA76PF_LAN_PHYMASK	((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
-#define JA76PF_MDIO_PHYMASK	(JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
-
-static void __init ja76pf_init(void)
-{
-	ath79_register_m25p80(&ja76pf_flash_data);
-
-	ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
-	ath79_eth1_data.speed = SPEED_1000;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	platform_device_register(&ja76pf_i2c_gpio_device);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
-					ja76pf_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(ja76pf_gpio_keys),
-					 ja76pf_gpio_keys);
-
-	ath79_register_usb();
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c
deleted file mode 100644
index a3c93ccd90..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-jwap003.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  jjPlus JWAP003 board support
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define JWAP003_KEYS_POLL_INTERVAL	20	/* msecs */
-#define JWAP003_KEYS_DEBOUNCE_INTERVAL	(3 * JWAP003_KEYS_POLL_INTERVAL)
-
-#define JWAP003_GPIO_WPS	11
-#define JWAP003_GPIO_I2C_SCL	0
-#define JWAP003_GPIO_I2C_SDA	1
-
-static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
-	{
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= JWAP003_GPIO_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
-	.sda_pin	= JWAP003_GPIO_I2C_SDA,
-	.scl_pin	= JWAP003_GPIO_I2C_SCL,
-};
-
-static struct platform_device jwap003_i2c_gpio_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev = {
-		.platform_data  = &jwap003_i2c_gpio_data,
-	}
-};
-
-static const char *jwap003_part_probes[] = {
-	"RedBoot",
-	NULL,
-};
-
-static struct flash_platform_data jwap003_flash_data = {
-	.part_probes	= jwap003_part_probes,
-};
-
-#define JWAP003_WAN_PHYMASK	BIT(0)
-#define JWAP003_LAN_PHYMASK	BIT(4)
-
-static void __init jwap003_init(void)
-{
-	ath79_register_m25p80(&jwap003_flash_data);
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.has_ar8216 = 1;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
-	ath79_eth1_data.speed = SPEED_100;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	platform_device_register(&jwap003_i2c_gpio_device);
-
-	ath79_register_usb();
-
-	ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(jwap003_gpio_keys),
-					 jwap003_gpio_keys);
-
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c
deleted file mode 100644
index c2460ce33c..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w04nu.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- *  Planex MZK-W04NU board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MZK_W04NU_GPIO_LED_USB		0
-#define MZK_W04NU_GPIO_LED_STATUS	1
-#define MZK_W04NU_GPIO_LED_WPS		3
-#define MZK_W04NU_GPIO_LED_WLAN		6
-#define MZK_W04NU_GPIO_LED_AP		15
-#define MZK_W04NU_GPIO_LED_ROUTER	16
-
-#define MZK_W04NU_GPIO_BTN_APROUTER	5
-#define MZK_W04NU_GPIO_BTN_WPS		12
-#define MZK_W04NU_GPIO_BTN_RESET	21
-
-#define MZK_W04NU_KEYS_POLL_INTERVAL	20	/* msecs */
-#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL)
-
-static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
-	{
-		.name		= "planex:green:status",
-		.gpio		= MZK_W04NU_GPIO_LED_STATUS,
-		.active_low	= 1,
-	}, {
-		.name		= "planex:blue:wps",
-		.gpio		= MZK_W04NU_GPIO_LED_WPS,
-		.active_low	= 1,
-	}, {
-		.name		= "planex:green:wlan",
-		.gpio		= MZK_W04NU_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}, {
-		.name		= "planex:green:usb",
-		.gpio		= MZK_W04NU_GPIO_LED_USB,
-		.active_low	= 1,
-	}, {
-		.name		= "planex:green:ap",
-		.gpio		= MZK_W04NU_GPIO_LED_AP,
-		.active_low	= 1,
-	}, {
-		.name		= "planex:green:router",
-		.gpio		= MZK_W04NU_GPIO_LED_ROUTER,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= MZK_W04NU_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= MZK_W04NU_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}, {
-		.desc		= "aprouter",
-		.type		= EV_KEY,
-		.code		= BTN_2,
-		.debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= MZK_W04NU_GPIO_BTN_APROUTER,
-		.active_low	= 0,
-	}
-};
-
-#define MZK_W04NU_WAN_PHYMASK	BIT(4)
-#define MZK_W04NU_MDIO_MASK	(~MZK_W04NU_WAN_PHYMASK)
-
-static void __init mzk_w04nu_setup(void)
-{
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_mdio(0, MZK_W04NU_MDIO_MASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.has_ar8216 = 1;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
-				 mzk_w04nu_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(mzk_w04nu_gpio_keys),
-					mzk_w04nu_gpio_keys);
-	ath79_register_usb();
-
-	ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
-	     mzk_w04nu_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c
deleted file mode 100644
index 8c40365283..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-mzk-w300nh.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  Planex MZK-W300NH board support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MZK_W300NH_GPIO_LED_STATUS	1
-#define MZK_W300NH_GPIO_LED_WPS		3
-#define MZK_W300NH_GPIO_LED_WLAN	6
-#define MZK_W300NH_GPIO_LED_AP_GREEN	15
-#define MZK_W300NH_GPIO_LED_AP_AMBER	16
-
-#define MZK_W300NH_GPIO_BTN_APROUTER	5
-#define MZK_W300NH_GPIO_BTN_WPS		12
-#define MZK_W300NH_GPIO_BTN_RESET	21
-
-#define MZK_W300NH_KEYS_POLL_INTERVAL	20	/* msecs */
-#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
-
-static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
-	{
-		.name		= "planex:green:status",
-		.gpio		= MZK_W300NH_GPIO_LED_STATUS,
-		.active_low	= 1,
-	}, {
-		.name		= "planex:blue:wps",
-		.gpio		= MZK_W300NH_GPIO_LED_WPS,
-		.active_low	= 1,
-	}, {
-		.name		= "planex:green:wlan",
-		.gpio		= MZK_W300NH_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}, {
-		.name		= "planex:green:aprouter",
-		.gpio		= MZK_W300NH_GPIO_LED_AP_GREEN,
-	}, {
-		.name		= "planex:amber:aprouter",
-		.gpio		= MZK_W300NH_GPIO_LED_AP_AMBER,
-	}
-};
-
-static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= MZK_W300NH_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= MZK_W300NH_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}, {
-		.desc		= "aprouter",
-		.type		= EV_KEY,
-		.code		= BTN_2,
-		.debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= MZK_W300NH_GPIO_BTN_APROUTER,
-		.active_low	= 0,
-	}
-};
-
-#define MZK_W300NH_WAN_PHYMASK	BIT(4)
-#define MZK_W300NH_MDIO_MASK	(~MZK_W300NH_WAN_PHYMASK)
-
-static void __init mzk_w300nh_setup(void)
-{
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_mdio(0, MZK_W300NH_MDIO_MASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.has_ar8216 = 1;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
-				 mzk_w300nh_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(mzk_w300nh_gpio_keys),
-					mzk_w300nh_gpio_keys);
-	ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
-	     mzk_w300nh_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c
deleted file mode 100644
index 8aa7331d43..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-nbg460n.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  Zyxel NBG 460N/550N/550NH board support
- *
- *  Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
- *
- *  based on mach-tl-wr1043nd.c
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-/* LEDs */
-#define NBG460N_GPIO_LED_WPS		3
-#define NBG460N_GPIO_LED_WAN		6
-#define NBG460N_GPIO_LED_POWER		14
-#define NBG460N_GPIO_LED_WLAN		15
-
-/* Buttons */
-#define NBG460N_GPIO_BTN_WPS		12
-#define NBG460N_GPIO_BTN_RESET		21
-
-#define NBG460N_KEYS_POLL_INTERVAL	20	/* msecs */
-#define NBG460N_KEYS_DEBOUNCE_INTERVAL	(3 * NBG460N_KEYS_POLL_INTERVAL)
-
-/* RTC chip PCF8563 I2C interface */
-#define NBG460N_GPIO_PCF8563_SDA	8
-#define NBG460N_GPIO_PCF8563_SCK	7
-
-/* Switch configuration I2C interface */
-#define NBG460N_GPIO_RTL8366_SDA	16
-#define NBG460N_GPIO_RTL8366_SCK	18
-
-static struct mtd_partition nbg460n_partitions[] = {
-	{
-		.name		= "Bootbase",
-		.offset		= 0,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "U-Boot Config",
-		.offset		= 0x010000,
-		.size		= 0x030000,
-	}, {
-		.name		= "U-Boot",
-		.offset		= 0x040000,
-		.size		= 0x030000,
-	}, {
-		.name		= "linux",
-		.offset		= 0x070000,
-		.size		= 0x0e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x150000,
-		.size		= 0x2a0000,
-	}, {
-		.name		= "CalibData",
-		.offset		= 0x3f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x070000,
-		.size		= 0x380000,
-	}
-};
-
-static struct flash_platform_data nbg460n_flash_data = {
-	.parts		= nbg460n_partitions,
-	.nr_parts       = ARRAY_SIZE(nbg460n_partitions),
-};
-
-static struct gpio_led nbg460n_leds_gpio[] __initdata = {
-	{
-		.name		= "nbg460n:green:power",
-		.gpio		= NBG460N_GPIO_LED_POWER,
-		.active_low	= 0,
-		.default_trigger = "default-on",
-	}, {
-		.name		= "nbg460n:green:wps",
-		.gpio		= NBG460N_GPIO_LED_WPS,
-		.active_low	= 0,
-	}, {
-		.name		= "nbg460n:green:wlan",
-		.gpio		= NBG460N_GPIO_LED_WLAN,
-		.active_low	= 0,
-	}, {
-		/* Not really for controlling the LED,
-		   when set low the LED blinks uncontrollable  */
-		.name		= "nbg460n:green:wan",
-		.gpio		= NBG460N_GPIO_LED_WAN,
-		.active_low	= 0,
-	}
-};
-
-static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= NBG460N_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= NBG460N_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
-	.sda_pin	= NBG460N_GPIO_PCF8563_SDA,
-	.scl_pin	= NBG460N_GPIO_PCF8563_SCK,
-	.udelay		= 10,
-};
-
-static struct platform_device nbg460n_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= -1,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev		= {
-		.platform_data	= &nbg460n_i2c_device_platdata,
-	},
-};
-
-static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static void __devinit nbg460n_i2c_init(void)
-{
-	/* The gpio interface */
-	platform_device_register(&nbg460n_i2c_device);
-	/* I2C devices */
-	i2c_register_board_info(0, nbg460n_i2c_devs,
-				ARRAY_SIZE(nbg460n_i2c_devs));
-}
-
-
-static struct rtl8366_platform_data nbg460n_rtl8366s_data = {
-	.gpio_sda	= NBG460N_GPIO_RTL8366_SDA,
-	.gpio_sck	= NBG460N_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device nbg460n_rtl8366s_device = {
-	.name		= RTL8366S_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &nbg460n_rtl8366s_data,
-	}
-};
-
-static void __init nbg460n_setup(void)
-{
-	/* end of bootloader sector contains mac address */
-	u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
-	/* last sector contains wlan calib data */
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	/* LAN Port */
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	/* WAN Port */
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-	ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = 0x10;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	/* register the switch phy */
-	platform_device_register(&nbg460n_rtl8366s_device);
-
-	/* register flash */
-	ath79_register_m25p80(&nbg460n_flash_data);
-
-	ath79_register_wmac(eeprom, mac);
-
-	/* register RTC chip */
-	nbg460n_i2c_init();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
-				 nbg460n_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(nbg460n_gpio_keys),
-					nbg460n_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH",
-	     nbg460n_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c
deleted file mode 100644
index 519640ac9a..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-om2p.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  OpenMesh OM2P support
- *
- *  Copyright (C) 2011 Marek Lindner <marek@open-mesh.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define OM2P_GPIO_LED_POWER	0
-#define OM2P_GPIO_LED_GREEN	13
-#define OM2P_GPIO_LED_RED	14
-#define OM2P_GPIO_LED_YELLOW	15
-#define OM2P_GPIO_LED_LAN	16
-#define OM2P_GPIO_LED_WAN	17
-#define OM2P_GPIO_BTN_RESET	11
-
-#define OM2P_KEYS_POLL_INTERVAL		20	/* msecs */
-#define OM2P_KEYS_DEBOUNCE_INTERVAL	(3 * OM2P_KEYS_POLL_INTERVAL)
-
-#define OM2P_WAN_PHYMASK	BIT(4)
-
-static struct flash_platform_data om2p_flash_data = {
-	.type = "s25sl12800",
-	.name = "ar7240-nor0",
-};
-
-static struct gpio_led om2p_leds_gpio[] __initdata = {
-	{
-		.name		= "om2p:blue:power",
-		.gpio		= OM2P_GPIO_LED_POWER,
-		.active_low	= 1,
-	}, {
-		.name		= "om2p:red:wifi",
-		.gpio		= OM2P_GPIO_LED_RED,
-		.active_low	= 1,
-	}, {
-		.name		= "om2p:yellow:wifi",
-		.gpio		= OM2P_GPIO_LED_YELLOW,
-		.active_low	= 1,
-	}, {
-		.name		= "om2p:green:wifi",
-		.gpio		= OM2P_GPIO_LED_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "om2p:blue:lan",
-		.gpio		= OM2P_GPIO_LED_LAN,
-		.active_low	= 1,
-	}, {
-		.name		= "om2p:blue:wan",
-		.gpio		= OM2P_GPIO_LED_WAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button om2p_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= OM2P_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static void __init om2p_setup(void)
-{
-	u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
-	u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
-	u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000);
-
-	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	ath79_register_m25p80(&om2p_flash_data);
-
-	ath79_register_mdio(0, ~OM2P_WAN_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ap91_pci_init(ee, NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
-				 om2p_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(om2p_gpio_keys),
-					om2p_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c
deleted file mode 100644
index 3a350e90a1..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb42.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  Atheros PB42 board support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define PB42_KEYS_POLL_INTERVAL		20	/* msecs */
-#define PB42_KEYS_DEBOUNCE_INTERVAL	(3 * PB42_KEYS_POLL_INTERVAL)
-
-#define PB42_GPIO_BTN_SW4	8
-#define PB42_GPIO_BTN_SW5	3
-
-static struct gpio_keys_button pb42_gpio_keys[] __initdata = {
-	{
-		.desc		= "sw4",
-		.type		= EV_KEY,
-		.code		= BTN_0,
-		.debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= PB42_GPIO_BTN_SW4,
-		.active_low	= 1,
-	}, {
-		.desc		= "sw5",
-		.type		= EV_KEY,
-		.code		= BTN_1,
-		.debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= PB42_GPIO_BTN_SW5,
-		.active_low	= 1,
-	}
-};
-
-static const char *pb42_part_probes[] = {
-	"RedBoot",
-	NULL,
-};
-
-static struct flash_platform_data pb42_flash_data = {
-	.part_probes	= pb42_part_probes,
-};
-
-#define PB42_WAN_PHYMASK	BIT(20)
-#define PB42_LAN_PHYMASK	(BIT(16) | BIT(17) | BIT(18) | BIT(19))
-#define PB42_MDIO_PHYMASK	(PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
-
-static void __init pb42_init(void)
-{
-	ath79_register_m25p80(&pb42_flash_data);
-
-	ath79_register_mdio(0, ~PB42_MDIO_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.speed = SPEED_100;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(pb42_gpio_keys),
-					pb42_gpio_keys);
-
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c
deleted file mode 100644
index ff01f72869..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-pb92.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- *  Atheros PB92 board support
- *
- *  Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
- *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-static struct mtd_partition pb92_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x040000,
-		.size		= 0x010000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x050000,
-		.size		= 0x2b0000,
-	}, {
-		.name		= "uImage",
-		.offset		= 0x300000,
-		.size		= 0x0e0000,
-	}, {
-		.name		= "ART",
-		.offset		= 0x3e0000,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data pb92_flash_data = {
-	.parts		= pb92_partitions,
-	.nr_parts	= ARRAY_SIZE(pb92_partitions),
-};
-
-#define PB92_KEYS_POLL_INTERVAL		20	/* msecs */
-#define PB92_KEYS_DEBOUNCE_INTERVAL	(3 * PB92_KEYS_POLL_INTERVAL)
-
-#define PB92_GPIO_BTN_SW4	8
-#define PB92_GPIO_BTN_SW5	3
-
-static struct gpio_keys_button pb92_gpio_keys[] __initdata = {
-	{
-		.desc		= "sw4",
-		.type		= EV_KEY,
-		.code		= BTN_0,
-		.debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= PB92_GPIO_BTN_SW4,
-		.active_low	= 1,
-	}, {
-		.desc		= "sw5",
-		.type		= EV_KEY,
-		.code		= BTN_1,
-		.debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= PB92_GPIO_BTN_SW5,
-		.active_low	= 1,
-	}
-};
-
-static void __init pb92_init(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	ath79_register_m25p80(&pb92_flash_data);
-
-	ath79_register_mdio(0, ~BIT(0));
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_register_eth(0);
-
-	ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(pb92_gpio_keys),
-					 pb92_gpio_keys);
-
-	ath79_register_usb();
-
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c
deleted file mode 100644
index 24a4e7c3ca..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb4xx.c
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- *  MikroTik RouterBOARD 4xx series support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mdio-gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-#include <asm/mach-ath79/rb4xx_cpld.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define RB4XX_GPIO_USER_LED	4
-#define RB4XX_GPIO_RESET_SWITCH	7
-
-#define RB4XX_GPIO_CPLD_BASE	32
-#define RB4XX_GPIO_CPLD_LED1	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
-#define RB4XX_GPIO_CPLD_LED2	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
-#define RB4XX_GPIO_CPLD_LED3	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
-#define RB4XX_GPIO_CPLD_LED4	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
-#define RB4XX_GPIO_CPLD_LED5	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
-
-#define RB4XX_KEYS_POLL_INTERVAL	20	/* msecs */
-#define RB4XX_KEYS_DEBOUNCE_INTERVAL	(3 * RB4XX_KEYS_POLL_INTERVAL)
-
-static struct gpio_led rb4xx_leds_gpio[] __initdata = {
-	{
-		.name		= "rb4xx:yellow:user",
-		.gpio		= RB4XX_GPIO_USER_LED,
-		.active_low	= 0,
-	}, {
-		.name		= "rb4xx:green:led1",
-		.gpio		= RB4XX_GPIO_CPLD_LED1,
-		.active_low	= 1,
-	}, {
-		.name		= "rb4xx:green:led2",
-		.gpio		= RB4XX_GPIO_CPLD_LED2,
-		.active_low	= 1,
-	}, {
-		.name		= "rb4xx:green:led3",
-		.gpio		= RB4XX_GPIO_CPLD_LED3,
-		.active_low	= 1,
-	}, {
-		.name		= "rb4xx:green:led4",
-		.gpio		= RB4XX_GPIO_CPLD_LED4,
-		.active_low	= 1,
-	}, {
-		.name		= "rb4xx:green:led5",
-		.gpio		= RB4XX_GPIO_CPLD_LED5,
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset_switch",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= RB4XX_GPIO_RESET_SWITCH,
-		.active_low	= 1,
-	}
-};
-
-static struct platform_device rb4xx_nand_device = {
-	.name	= "rb4xx-nand",
-	.id	= -1,
-};
-
-static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = {
-	{
-		.slot	= 17,
-		.pin	= 1,
-		.irq	= ATH79_PCI_IRQ(2),
-	}, {
-		.slot	= 18,
-		.pin	= 1,
-		.irq	= ATH79_PCI_IRQ(0),
-	}, {
-		.slot	= 18,
-		.pin	= 2,
-		.irq	= ATH79_PCI_IRQ(1),
-	}, {
-		.slot	= 19,
-		.pin	= 1,
-		.irq	= ATH79_PCI_IRQ(1),
-	}, {
-		.slot	= 19,
-		.pin	= 1,
-		.irq	= ATH79_PCI_IRQ(2),
-	}
-};
-
-static struct mtd_partition rb4xx_partitions[] = {
-	{
-		.name		= "routerboot",
-		.offset		= 0,
-		.size		= 0x0b000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "hard_config",
-		.offset		= 0x0b000,
-		.size		= 0x01000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "bios",
-		.offset		= 0x0d000,
-		.size		= 0x02000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "soft_config",
-		.offset		= 0x0f000,
-		.size		= 0x01000,
-	}
-};
-
-static struct flash_platform_data rb4xx_flash_data = {
-	.type		= "pm25lv512",
-	.parts		= rb4xx_partitions,
-	.nr_parts	= ARRAY_SIZE(rb4xx_partitions),
-};
-
-static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
-	.gpio_base	= RB4XX_GPIO_CPLD_BASE,
-};
-
-static struct mmc_spi_platform_data rb4xx_mmc_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct spi_board_info rb4xx_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "m25p80",
-		.platform_data	= &rb4xx_flash_data,
-	}, {
-		.bus_num	= 0,
-		.chip_select	= 1,
-		.max_speed_hz	= 25000000,
-		.modalias	= "spi-rb4xx-cpld",
-		.platform_data	= &rb4xx_cpld_data,
-	}
-};
-
-static struct spi_board_info rb4xx_microsd_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 2,
-		.max_speed_hz	= 25000000,
-		.modalias	= "mmc_spi",
-		.platform_data	= &rb4xx_mmc_data,
-	}
-};
-
-
-static struct resource rb4xx_spi_resources[] = {
-	{
-		.start	= AR71XX_SPI_BASE,
-		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device rb4xx_spi_device = {
-	.name		= "rb4xx-spi",
-	.id		= -1,
-	.resource	= rb4xx_spi_resources,
-	.num_resources	= ARRAY_SIZE(rb4xx_spi_resources),
-};
-
-static void __init rb4xx_generic_setup(void)
-{
-	ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
-				   AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
-					rb4xx_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(rb4xx_gpio_keys),
-					rb4xx_gpio_keys);
-
-	spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
-	platform_device_register(&rb4xx_spi_device);
-	platform_device_register(&rb4xx_nand_device);
-}
-
-static void __init rb411_setup(void)
-{
-	rb4xx_generic_setup();
-	spi_register_board_info(rb4xx_microsd_info,
-				ARRAY_SIZE(rb4xx_microsd_info));
-
-	ath79_register_mdio(0, 0xfffffffc);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = 0x00000003;
-
-	ath79_register_eth(0);
-
-	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
-	     rb411_setup);
-
-static void __init rb411u_setup(void)
-{
-	rb411_setup();
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
-	     rb411u_setup);
-
-#define RB433_LAN_PHYMASK	BIT(0)
-#define RB433_WAN_PHYMASK	BIT(4)
-#define RB433_MDIO_PHYMASK	(RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
-
-static void __init rb433_setup(void)
-{
-	rb4xx_generic_setup();
-	spi_register_board_info(rb4xx_microsd_info,
-				ARRAY_SIZE(rb4xx_microsd_info));
-
-	ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
-
-	ath79_register_eth(1);
-	ath79_register_eth(0);
-
-	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
-	     rb433_setup);
-
-static void __init rb433u_setup(void)
-{
-	rb433_setup();
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
-	     rb433u_setup);
-
-#define RB450_LAN_PHYMASK	BIT(0)
-#define RB450_WAN_PHYMASK	BIT(4)
-#define RB450_MDIO_PHYMASK	(RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
-
-static void __init rb450_generic_setup(int gige)
-{
-	rb4xx_generic_setup();
-	ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
-	ath79_eth0_data.phy_if_mode = (gige) ?
-		PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth1_data.phy_if_mode = (gige) ?
-		PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
-
-	ath79_register_eth(1);
-	ath79_register_eth(0);
-}
-
-static void __init rb450_setup(void)
-{
-	rb450_generic_setup(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
-	     rb450_setup);
-
-static void __init rb450g_setup(void)
-{
-	rb450_generic_setup(1);
-	spi_register_board_info(rb4xx_microsd_info,
-				ARRAY_SIZE(rb4xx_microsd_info));
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
-	     rb450g_setup);
-
-static void __init rb493_setup(void)
-{
-	rb4xx_generic_setup();
-
-	ath79_register_mdio(0, 0x3fffff00);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = 0x00000001;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
-	     rb493_setup);
-
-#define RB493G_GPIO_MDIO_MDC		7
-#define RB493G_GPIO_MDIO_DATA		8
-
-#define RB493G_MDIO_PHYMASK		BIT(0)
-
-static struct mdio_gpio_platform_data rb493g_mdio_data = {
-	.mdc		= RB493G_GPIO_MDIO_MDC,
-	.mdio		= RB493G_GPIO_MDIO_DATA,
-
-	.phy_mask	= ~RB493G_MDIO_PHYMASK,
-};
-
-static struct platform_device rb493g_mdio_device = {
-	.name 		= "mdio-gpio",
-	.id 		= -1,
-	.dev 		= {
-		.platform_data	= &rb493g_mdio_data,
-	},
-};
-
-static void __init rb493g_setup(void)
-{
-	ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
-				    AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
-				    rb4xx_leds_gpio);
-
-	spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
-	platform_device_register(&rb4xx_spi_device);
-	platform_device_register(&rb4xx_nand_device);
-
-	ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
-	ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
-	ath79_eth1_data.speed = SPEED_1000;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-
-	platform_device_register(&rb493g_mdio_device);
-
-	ath79_register_eth(1);
-	ath79_register_eth(0);
-
-	ath79_register_usb();
-
-	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
-	     rb493g_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c
deleted file mode 100644
index 976617bb36..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rb750.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- *  MikroTik RouterBOARD 750 support
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/mach-rb750.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "machtypes.h"
-
-static struct rb750_led_data rb750_leds[] = {
-	{
-		.name		= "rb750:green:act",
-		.mask		= RB750_LED_ACT,
-		.active_low	= 1,
-	}, {
-		.name		= "rb750:green:port1",
-		.mask		= RB750_LED_PORT5,
-		.active_low	= 1,
-	}, {
-		.name		= "rb750:green:port2",
-		.mask		= RB750_LED_PORT4,
-		.active_low	= 1,
-	}, {
-		.name		= "rb750:green:port3",
-		.mask		= RB750_LED_PORT3,
-		.active_low	= 1,
-	}, {
-		.name		= "rb750:green:port4",
-		.mask		= RB750_LED_PORT2,
-		.active_low	= 1,
-	}, {
-		.name		= "rb750:green:port5",
-		.mask		= RB750_LED_PORT1,
-		.active_low	= 1,
-	}
-};
-
-static struct rb750_led_platform_data rb750_leds_data = {
-	.num_leds	= ARRAY_SIZE(rb750_leds),
-	.leds		= rb750_leds,
-};
-
-static struct platform_device rb750_leds_device = {
-	.name	= "leds-rb750",
-	.dev	= {
-		.platform_data = &rb750_leds_data,
-	}
-};
-
-static struct platform_device rb750_nand_device = {
-	.name	= "rb750-nand",
-	.id	= -1,
-};
-
-int rb750_latch_change(u32 mask_clr, u32 mask_set)
-{
-	static DEFINE_SPINLOCK(lock);
-	static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
-	static u32 latch_oe;
-	static u32 latch_clr;
-	unsigned long flags;
-	u32 t;
-	int ret = 0;
-
-	spin_lock_irqsave(&lock, flags);
-
-	if ((mask_clr & BIT(31)) != 0 &&
-	    (latch_set & RB750_LVC573_LE) == 0) {
-		goto unlock;
-	}
-
-	latch_set = (latch_set | mask_set) & ~mask_clr;
-	latch_clr = (latch_clr | mask_clr) & ~mask_set;
-
-	if (latch_oe == 0)
-		latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
-
-	if (likely(latch_set & RB750_LVC573_LE)) {
-		void __iomem *base = ath79_gpio_base;
-
-		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
-		t |= mask_clr | latch_oe | mask_set;
-
-		__raw_writel(t, base + AR71XX_GPIO_REG_OE);
-		__raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
-		__raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
-	} else if (mask_clr & RB750_LVC573_LE) {
-		void __iomem *base = ath79_gpio_base;
-
-		latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
-		__raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
-		/* flush write */
-		__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
-	}
-
-	ret = 1;
-
-unlock:
-	spin_unlock_irqrestore(&lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(rb750_latch_change);
-
-void rb750_nand_pins_enable(void)
-{
-	ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
-				  AR724X_GPIO_FUNC_SPI_EN);
-}
-EXPORT_SYMBOL_GPL(rb750_nand_pins_enable);
-
-void rb750_nand_pins_disable(void)
-{
-	ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
-				  AR724X_GPIO_FUNC_JTAG_DISABLE);
-}
-EXPORT_SYMBOL_GPL(rb750_nand_pins_disable);
-
-static void __init rb750_setup(void)
-{
-	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				     AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				     AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				     AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				     AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-
-	ath79_register_mdio(0, 0x0);
-
-	/* LAN ports */
-	ath79_register_eth(1);
-
-	/* WAN port */
-	ath79_register_eth(0);
-
-	platform_device_register(&rb750_leds_device);
-	platform_device_register(&rb750_nand_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
-	     rb750_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c
deleted file mode 100644
index 28d9de4f3e..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-rw2458n.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  Redwave RW2458N support
- *
- *  Copyright (C) 2011-2012 Cezary Jackiewicz <cezary@eko.one.pl>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define RW2458N_GPIO_LED_D3	1
-#define RW2458N_GPIO_LED_D4	0
-#define RW2458N_GPIO_LED_D5	11
-#define RW2458N_GPIO_LED_D6	7
-#define RW2458N_GPIO_BTN_RESET	12
-
-#define RW2458N_KEYS_POLL_INTERVAL	20	/* msecs */
-#define RW2458N_KEYS_DEBOUNCE_INTERVAL	(3 * RW2458N_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= RW2458N_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-#define RW2458N_WAN_PHYMASK	BIT(4)
-
-static struct gpio_led rw2458n_leds_gpio[] __initdata = {
-	{
-		.name		= "rw2458n:green:d3",
-		.gpio		= RW2458N_GPIO_LED_D3,
-		.active_low	= 1,
-	}, {
-		.name		= "rw2458n:green:d4",
-		.gpio		= RW2458N_GPIO_LED_D4,
-		.active_low	= 1,
-	}, {
-		.name		= "rw2458n:green:d5",
-		.gpio		= RW2458N_GPIO_LED_D5,
-		.active_low	= 1,
-	}, {
-		.name		= "rw2458n:green:d6",
-		.gpio		= RW2458N_GPIO_LED_D6,
-		.active_low	= 1,
-	}
-};
-
-static const char *rw2458n_part_probes[] = {
-        "RedBoot",
-        NULL,
-};
-
-static struct flash_platform_data rw2458n_flash_data = {
-        .part_probes    = rw2458n_part_probes,
-};
-
-static void __init rw2458n_setup(void)
-{
-	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_m25p80(&rw2458n_flash_data);
-
-	ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ap91_pci_init(ee, NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio),
-				 rw2458n_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(rw2458n_gpio_keys),
-					rw2458n_gpio_keys);
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N",
-	    rw2458n_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c
deleted file mode 100644
index de2d2a5376..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-632brp.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  TrendNET TEW-632BRP board support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define TEW_632BRP_GPIO_LED_STATUS	1
-#define TEW_632BRP_GPIO_LED_WPS		3
-#define TEW_632BRP_GPIO_LED_WLAN	6
-#define TEW_632BRP_GPIO_BTN_WPS		12
-#define TEW_632BRP_GPIO_BTN_RESET	21
-
-#define TEW_632BRP_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL)
-
-#define TEW_632BRP_CONFIG_ADDR	0x1f020000
-#define TEW_632BRP_CONFIG_SIZE	0x10000
-
-static struct mtd_partition tew_632brp_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "config",
-		.offset		= 0x020000,
-		.size		= 0x010000,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x030000,
-		.size		= 0x0e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x110000,
-		.size		= 0x2e0000,
-	}, {
-		.name		= "art",
-		.offset		= 0x3f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x030000,
-		.size		= 0x3c0000,
-	}
-};
-
-static struct flash_platform_data tew_632brp_flash_data = {
-	.parts		= tew_632brp_partitions,
-	.nr_parts	= ARRAY_SIZE(tew_632brp_partitions),
-};
-
-static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
-	{
-		.name		= "tew-632brp:green:status",
-		.gpio		= TEW_632BRP_GPIO_LED_STATUS,
-		.active_low	= 1,
-	}, {
-		.name		= "tew-632brp:blue:wps",
-		.gpio		= TEW_632BRP_GPIO_LED_WPS,
-		.active_low	= 1,
-	}, {
-		.name		= "tew-632brp:green:wlan",
-		.gpio		= TEW_632BRP_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TEW_632BRP_GPIO_BTN_RESET,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TEW_632BRP_GPIO_BTN_WPS,
-	}
-};
-
-#define TEW_632BRP_LAN_PHYMASK	BIT(0)
-#define TEW_632BRP_WAN_PHYMASK	BIT(4)
-#define TEW_632BRP_MDIO_MASK	(~(TEW_632BRP_LAN_PHYMASK | \
-				   TEW_632BRP_WAN_PHYMASK))
-
-static void __init tew_632brp_setup(void)
-{
-	const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 mac[6];
-	u8 *wlan_mac = NULL;
-
-	if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
-				       "lan_mac=", mac) == 0) {
-		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-		wlan_mac = mac;
-	}
-
-	ath79_register_mdio(0, TEW_632BRP_MDIO_MASK);
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
-
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(&tew_632brp_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
-				 tew_632brp_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tew_632brp_gpio_keys),
-					tew_632brp_gpio_keys);
-
-	ath79_register_wmac(eeprom, wlan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
-	     tew_632brp_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-673gru.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-673gru.c
deleted file mode 100644
index 71f2ec00e4..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tew-673gru.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- *  TRENDnet TEW-673GRU board support
- *
- *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TEW673GRU_GPIO_LCD_SCK		0
-#define TEW673GRU_GPIO_LCD_MOSI		1
-#define TEW673GRU_GPIO_LCD_MISO		2
-#define TEW673GRU_GPIO_LCD_CS		6
-
-#define TEW673GRU_GPIO_LED_WPS		9
-
-#define TEW673GRU_GPIO_BTN_RESET	3
-#define TEW673GRU_GPIO_BTN_WPS		8
-
-#define TEW673GRU_GPIO_RTL8366_SDA	5
-#define TEW673GRU_GPIO_RTL8366_SCK	7
-
-#define TEW673GRU_KEYS_POLL_INTERVAL	20 /* msecs */
-#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL)
-
-#define TEW673GRU_CAL_LOCATION_0	0x1f661000
-#define TEW673GRU_CAL_LOCATION_1	0x1f665000
-
-#define TEW673GRU_MAC_LOCATION_0	0x1f66ffa0
-#define TEW673GRU_MAC_LOCATION_1	0x1f66ffb4
-
-static struct mtd_partition tew673gru_partitions[] = {
-	{
-		.name		= "uboot",
-		.offset		= 0,
-		.size		= 0x040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "config",
-		.offset		= 0x040000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x050000,
-		.size		= 0x610000,
-	}, {
-		.name		= "caldata",
-		.offset		= 0x660000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "unknown",
-		.offset		= 0x670000,
-		.size		= 0x190000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data tew673gru_flash_data = {
-	.parts          = tew673gru_partitions,
-	.nr_parts       = ARRAY_SIZE(tew673gru_partitions),
-};
-
-static struct gpio_led tew673gru_leds_gpio[] __initdata = {
-	{
-		.name		= "trendnet:blue:wps",
-		.gpio		= TEW673GRU_GPIO_LED_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TEW673GRU_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TEW673GRU_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = {
-	{ .reg = 0x06, .val = 0x0108 },
-};
-
-static struct rtl8366_platform_data tew673gru_rtl8366s_data = {
-	.gpio_sda	= TEW673GRU_GPIO_RTL8366_SDA,
-	.gpio_sck	= TEW673GRU_GPIO_RTL8366_SCK,
-	.num_initvals	= ARRAY_SIZE(tew673gru_rtl8366s_initvals),
-	.initvals	= tew673gru_rtl8366s_initvals,
-};
-
-static struct platform_device tew673gru_rtl8366s_device = {
-	.name		= RTL8366S_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &tew673gru_rtl8366s_data,
-	}
-};
-
-static struct spi_board_info tew673gru_spi_info[] = {
-	{
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.max_speed_hz	= 400000,
-		.modalias	= "spidev",
-		.mode		= SPI_MODE_2,
-		.controller_data = (void *) TEW673GRU_GPIO_LCD_CS,
-	},
-};
-
-static struct spi_gpio_platform_data tew673gru_spi_data = {
-	.sck		= TEW673GRU_GPIO_LCD_SCK,
-	.miso		= TEW673GRU_GPIO_LCD_MISO,
-	.mosi		= TEW673GRU_GPIO_LCD_MOSI,
-	.num_chipselect = 1,
-};
-
-static struct platform_device tew673gru_spi_device = {
-	.name		= "spi_gpio",
-	.id		= 1,
-	.dev = {
-		.platform_data = &tew673gru_spi_data,
-	},
-};
-
-static void tew673gru_read_ascii_mac(u8 *dest, unsigned int src_addr)
-{
-	int ret;
-	u8 *src = (u8 *)KSEG1ADDR(src_addr);
-
-	ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-		     &dest[0], &dest[1], &dest[2],
-		     &dest[3], &dest[4], &dest[5]);
-
-	if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN);
-}
-
-static void __init tew673gru_setup(void)
-{
-	u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
-
-	tew673gru_read_ascii_mac(mac1, TEW673GRU_MAC_LOCATION_0);
-	tew673gru_read_ascii_mac(mac2, TEW673GRU_MAC_LOCATION_1);
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
-	ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_pll_data.pll_1000 = 0x11110000;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
-	ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = 0x10;
-	ath79_eth1_pll_data.pll_1000 = 0x11110000;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(&tew673gru_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio),
-				 tew673gru_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tew673gru_gpio_keys),
-					tew673gru_gpio_keys);
-
-	ath79_register_usb();
-
-	platform_device_register(&tew673gru_rtl8366s_device);
-
-	ap9x_pci_setup_wmac_led_pin(0, 5);
-	ap9x_pci_setup_wmac_led_pin(1, 5);
-
-	ap94_pci_init((u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0), mac1,
-		      (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_1), mac2);
-
-	spi_register_board_info(tew673gru_spi_info,
-				ARRAY_SIZE(tew673gru_spi_info));
-	platform_device_register(&tew673gru_spi_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU",
-	     tew673gru_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr11u.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr11u.c
deleted file mode 100644
index 7846b4f18d..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr11u.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *  TP-LINK TL-MR11U board support
- *
- *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
- *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_MR11U_GPIO_LED_3G		27
-#define TL_MR11U_GPIO_LED_WLAN		26
-#define TL_MR11U_GPIO_LED_LAN		17
-
-#define TL_MR11U_GPIO_BTN_WPS		20
-#define TL_MR11U_GPIO_BTN_RESET		11
-
-#define TL_MR11U_GPIO_USB_POWER		8
-
-#define TL_MR11U_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL	(3 * TL_MR11U_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr11u_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_mr11u_flash_data = {
-	.part_probes	= tl_mr11u_part_probes,
-};
-
-static struct gpio_led tl_mr11u_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:3g",
-		.gpio		= TL_MR11U_GPIO_LED_3G,
-		.active_low	= 1,
-	},
-	{
-		.name		= "tp-link:green:wlan",
-		.gpio		= TL_MR11U_GPIO_LED_WLAN,
-		.active_low	= 1,
-	},
-	{
-		.name		= "tp-link:green:lan",
-		.gpio		= TL_MR11U_GPIO_LED_LAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = {
-	{
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_MR11U_GPIO_BTN_WPS,
-		.active_low	= 0,
-	},
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_MR11U_GPIO_BTN_RESET,
-		.active_low	= 0,
-	}
-};
-
-static void __init tl_mr11u_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_m25p80(&tl_mr11u_flash_data);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio),
-				 tl_mr11u_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_mr11u_gpio_keys),
-					tl_mr11u_gpio_keys);
-
-	gpio_request(TL_MR11U_GPIO_USB_POWER, "USB power");
-	gpio_direction_output(TL_MR11U_GPIO_USB_POWER, 1);
-	ath79_register_usb();
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
-	ath79_register_mdio(0, 0x0);
-	ath79_register_eth(0);
-
-	ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U",
-	     tl_mr11u_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c
deleted file mode 100644
index 9732d5cd56..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3020.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  TP-LINK TL-MR3020 board support
- *
- *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
- *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_MR3020_GPIO_LED_3G		27
-#define TL_MR3020_GPIO_LED_WLAN		0
-#define TL_MR3020_GPIO_LED_LAN		17
-#define TL_MR3020_GPIO_LED_WPS		26
-
-#define TL_MR3020_GPIO_BTN_WPS		11
-#define TL_MR3020_GPIO_BTN_SW1		18
-#define TL_MR3020_GPIO_BTN_SW2		20
-
-#define TL_MR3020_GPIO_USB_POWER	8
-
-#define TL_MR3020_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL	(3 * TL_MR3020_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr3020_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_mr3020_flash_data = {
-	.part_probes	= tl_mr3020_part_probes,
-};
-
-static struct gpio_led tl_mr3020_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:3g",
-		.gpio		= TL_MR3020_GPIO_LED_3G,
-		.active_low	= 1,
-	},
-	{
-		.name		= "tp-link:green:wlan",
-		.gpio		= TL_MR3020_GPIO_LED_WLAN,
-		.active_low	= 0,
-	},
-	{
-		.name		= "tp-link:green:lan",
-		.gpio		= TL_MR3020_GPIO_LED_LAN,
-		.active_low	= 1,
-	},
-	{
-		.name		= "tp-link:green:wps",
-		.gpio		= TL_MR3020_GPIO_LED_WPS,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = {
-	{
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_MR3020_GPIO_BTN_WPS,
-		.active_low	= 0,
-	},
-	{
-		.desc		= "sw1",
-		.type		= EV_KEY,
-		.code		= BTN_0,
-		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_MR3020_GPIO_BTN_SW1,
-		.active_low	= 0,
-	},
-	{
-		.desc		= "sw2",
-		.type		= EV_KEY,
-		.code		= BTN_1,
-		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_MR3020_GPIO_BTN_SW2,
-		.active_low	= 0,
-	}
-};
-
-static void __init tl_mr3020_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_m25p80(&tl_mr3020_flash_data);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio),
-				 tl_mr3020_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_mr3020_gpio_keys),
-					tl_mr3020_gpio_keys);
-
-	gpio_request(TL_MR3020_GPIO_USB_POWER, "USB power");
-	gpio_direction_output(TL_MR3020_GPIO_USB_POWER, 1);
-	ath79_register_usb();
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
-	ath79_register_mdio(0, 0x0);
-	ath79_register_eth(0);
-	ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020",
-	     tl_mr3020_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c
deleted file mode 100644
index 35515a9b4b..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-mr3x20.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  TP-LINK TL-MR3220/3420 board support
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TL_MR3X20_GPIO_LED_QSS		0
-#define TL_MR3X20_GPIO_LED_SYSTEM	1
-#define TL_MR3X20_GPIO_LED_3G		8
-
-#define TL_MR3X20_GPIO_BTN_RESET	11
-#define TL_MR3X20_GPIO_BTN_QSS		12
-
-#define TL_MR3X20_GPIO_USB_POWER	6
-
-#define TL_MR3X20_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr3x20_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_mr3x20_flash_data = {
-	.part_probes	= tl_mr3x20_part_probes,
-};
-
-static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:system",
-		.gpio		= TL_MR3X20_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_MR3X20_GPIO_LED_QSS,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:3g",
-		.gpio		= TL_MR3X20_GPIO_LED_3G,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_MR3X20_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "qss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_MR3X20_GPIO_BTN_QSS,
-		.active_low	= 1,
-	}
-};
-
-static void __init tl_ap99_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_m25p80(&tl_mr3x20_flash_data);
-
-	ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(tl_mr3x20_gpio_keys),
-					 tl_mr3x20_gpio_keys);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
-	ath79_register_mdio(0, 0x0);
-
-	/* LAN ports */
-	ath79_register_eth(1);
-	/* WAN port */
-	ath79_register_eth(0);
-
-	ap91_pci_init(ee, mac);
-}
-
-static void __init tl_mr3x20_usb_setup(void)
-{
-	/* enable power for the USB port */
-	gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power");
-	gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1);
-
-	ath79_register_usb();
-}
-
-static void __init tl_mr3220_setup(void)
-{
-	tl_ap99_setup();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
-				 tl_mr3x20_leds_gpio);
-	ap9x_pci_setup_wmac_led_pin(0, 1);
-	tl_mr3x20_usb_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
-	     tl_mr3220_setup);
-
-static void __init tl_mr3420_setup(void)
-{
-	tl_ap99_setup();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
-				 tl_mr3x20_leds_gpio);
-	ap9x_pci_setup_wmac_led_pin(0, 0);
-	tl_mr3x20_usb_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
-	     tl_mr3420_setup);
-
-static void __init tl_wr841n_v7_setup(void)
-{
-	tl_ap99_setup();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1,
-				 tl_mr3x20_leds_gpio);
-	ap9x_pci_setup_wmac_led_pin(0, 0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7",
-	     "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c
deleted file mode 100644
index b4fb2a9f91..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd-v2.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- *  TP-LINK TL-WA901N/ND v2 board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
- *  Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WA901ND_V2_GPIO_LED_QSS		4
-#define TL_WA901ND_V2_GPIO_LED_SYSTEM		2
-#define TL_WA901ND_V2_GPIO_LED_WLAN		9
-
-#define TL_WA901ND_V2_GPIO_BTN_RESET		3
-#define TL_WA901ND_V2_GPIO_BTN_QSS		7
-
-#define TL_WA901ND_V2_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL	\
-					(3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa901nd_v2_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wa901nd_v2_flash_data = {
-	.part_probes	= tl_wa901nd_v2_part_probes,
-};
-
-static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:system",
-		.gpio		= TL_WA901ND_V2_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_WA901ND_V2_GPIO_LED_QSS,
-	}, {
-		.name		= "tp-link:green:wlan",
-		.gpio		= TL_WA901ND_V2_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WA901ND_V2_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "qss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WA901ND_V2_GPIO_BTN_QSS,
-		.active_low	= 1,
-	}
-};
-
-static void __init tl_wa901nd_v2_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *eeprom  = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = 0x00001000;
-	ath79_register_mdio(0, 0x0);
-
-	ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
-				    AR71XX_RESET_GE0_PHY;
-	ath79_register_eth(0);
-
-	ath79_register_m25p80(&tl_wa901nd_v2_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio),
-				 tl_wa901nd_v2_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wa901nd_v2_gpio_keys),
-					tl_wa901nd_v2_gpio_keys);
-
-	ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",
-	     "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c
deleted file mode 100644
index 2f4e0c047d..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wa901nd.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *  TP-LINK TL-WA901N/ND v1 board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define TL_WA901ND_GPIO_LED_QSS		0
-#define TL_WA901ND_GPIO_LED_SYSTEM	1
-#define TL_WA901ND_GPIO_LED_LAN		13
-
-#define TL_WA901ND_GPIO_BTN_RESET	11
-#define TL_WA901ND_GPIO_BTN_QSS		12
-
-#define TL_WA901ND_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa901nd_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wa901nd_flash_data = {
-	.part_probes	= tl_wa901nd_part_probes,
-};
-
-static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:lan",
-		.gpio		= TL_WA901ND_GPIO_LED_LAN,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:system",
-		.gpio		= TL_WA901ND_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_WA901ND_GPIO_LED_QSS,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= BTN_0,
-		.debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WA901ND_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "qss",
-		.type		= EV_KEY,
-		.code		= BTN_1,
-		.debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WA901ND_GPIO_BTN_QSS,
-		.active_low	= 1,
-	}
-};
-
-static void __init tl_wa901nd_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee  = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	/*
-	 * ath79_eth0 would be the WAN port, but is not connected on
-	 * the TL-WA901ND. ath79_eth1 connects to the internal switch chip,
-	 * however we have a single LAN port only.
-	 */
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-	ath79_register_mdio(0, 0x0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(&tl_wa901nd_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
-				 tl_wa901nd_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wa901nd_gpio_keys),
-					tl_wa901nd_gpio_keys);
-
-	ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
-	     tl_wa901nd_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c
deleted file mode 100644
index e789b402b8..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr1043nd.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- *  TP-LINK TL-WR1043N/ND board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/rtl8366.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR1043ND_GPIO_LED_USB        1
-#define TL_WR1043ND_GPIO_LED_SYSTEM     2
-#define TL_WR1043ND_GPIO_LED_QSS        5
-#define TL_WR1043ND_GPIO_LED_WLAN       9
-
-#define TL_WR1043ND_GPIO_BTN_RESET      3
-#define TL_WR1043ND_GPIO_BTN_QSS        7
-
-#define TL_WR1043ND_GPIO_RTL8366_SDA	18
-#define TL_WR1043ND_GPIO_RTL8366_SCK	19
-
-#define TL_WR1043ND_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr1043nd_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wr1043nd_flash_data = {
-	.part_probes	= tl_wr1043nd_part_probes,
-};
-
-static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:usb",
-		.gpio		= TL_WR1043ND_GPIO_LED_USB,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:system",
-		.gpio		= TL_WR1043ND_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_WR1043ND_GPIO_LED_QSS,
-		.active_low	= 0,
-	}, {
-		.name		= "tp-link:green:wlan",
-		.gpio		= TL_WR1043ND_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR1043ND_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "qss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR1043ND_GPIO_BTN_QSS,
-		.active_low	= 1,
-	}
-};
-
-static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = {
-	.gpio_sda        = TL_WR1043ND_GPIO_RTL8366_SDA,
-	.gpio_sck        = TL_WR1043ND_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device tl_wr1043nd_rtl8366rb_device = {
-	.name		= RTL8366RB_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &tl_wr1043nd_rtl8366rb_data,
-	}
-};
-
-static void __init tl_wr1043nd_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_pll_data.pll_1000 = 0x1a000000;
-
-	ath79_register_eth(0);
-
-	ath79_register_usb();
-
-	ath79_register_m25p80(&tl_wr1043nd_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
-				 tl_wr1043nd_leds_gpio);
-
-	platform_device_register(&tl_wr1043nd_rtl8366rb_device);
-
-	ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wr1043nd_gpio_keys),
-					tl_wr1043nd_gpio_keys);
-
-	ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
-	     tl_wr1043nd_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c
deleted file mode 100644
index bb00b72e7d..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr2543n.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *  TP-LINK TL-WR2543N/ND board support
- *
- *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/rtl8367.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TL_WR2543N_GPIO_LED_WPS        0
-#define TL_WR2543N_GPIO_LED_USB        8
-
-#define TL_WR2543N_GPIO_BTN_RESET      11
-#define TL_WR2543N_GPIO_BTN_WPS        12
-
-#define TL_WR2543N_GPIO_RTL8367_SDA	1
-#define TL_WR2543N_GPIO_RTL8367_SCK	6
-
-#define TL_WR2543N_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr2543n_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wr2543n_flash_data = {
-	.part_probes	= tl_wr2543n_part_probes,
-	.max_read_len	= 64,
-};
-
-static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:usb",
-		.gpio		= TL_WR2543N_GPIO_LED_USB,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:wps",
-		.gpio		= TL_WR2543N_GPIO_LED_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR2543N_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR2543N_GPIO_BTN_WPS,
-	}
-};
-
-static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
-	.mode = RTL8367_EXTIF_MODE_RGMII,
-	.txdelay = 1,
-	.rxdelay = 0,
-	.ability = {
-		.force_mode = 1,
-		.txpause = 1,
-		.rxpause = 1,
-		.link = 1,
-		.duplex = 1,
-		.speed = RTL8367_PORT_SPEED_1000,
-	},
-};
-
-static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
-	.gpio_sda	= TL_WR2543N_GPIO_RTL8367_SDA,
-	.gpio_sck	= TL_WR2543N_GPIO_RTL8367_SCK,
-	.extif0_cfg	= &tl_wr2543n_rtl8367_extif0_cfg,
-};
-
-static struct platform_device tl_wr2543n_rtl8367_device = {
-	.name		= RTL8367_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &tl_wr2543n_rtl8367_data,
-	}
-};
-
-static void __init tl_wr2543n_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_m25p80(&tl_wr2543n_flash_data);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
-				 tl_wr2543n_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wr2543n_gpio_keys),
-					tl_wr2543n_gpio_keys);
-	ath79_register_usb();
-	ap91_pci_init(eeprom, mac);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
-	ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_pll_data.pll_1000 = 0x1a000000;
-
-	ath79_register_eth(0);
-
-	platform_device_register(&tl_wr2543n_rtl8367_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
-	     tl_wr2543n_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c
deleted file mode 100644
index badc35af15..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr703n.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  TP-LINK TL-WR703N board support
- *
- *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
- *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR703N_GPIO_LED_SYSTEM	27
-#define TL_WR703N_GPIO_BTN_RESET	11
-
-#define TL_WR703N_GPIO_USB_POWER	8
-
-#define TL_WR703N_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR703N_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr703n_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wr703n_flash_data = {
-	.part_probes	= tl_wr703n_part_probes,
-};
-
-static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:blue:system",
-		.gpio		= TL_WR703N_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR703N_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static void __init tl_wr703n_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_m25p80(&tl_wr703n_flash_data);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
-				 tl_wr703n_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wr703n_gpio_keys),
-					tl_wr703n_gpio_keys);
-
-	gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power");
-	gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1);
-	ath79_register_usb();
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
-	ath79_register_mdio(0, 0x0);
-	ath79_register_eth(0);
-
-	ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
-	     tl_wr703n_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c
deleted file mode 100644
index b8ccdfd60e..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd-v4.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  TP-LINK TL-WR741ND v4 board support
- *
- *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR741NDV4_GPIO_BTN_RESET	11
-#define TL_WR741NDV4_GPIO_BTN_WPS	26
-
-#define TL_WR741NDV4_GPIO_LED_WLAN	0
-#define TL_WR741NDV4_GPIO_LED_QSS	1
-#define TL_WR741NDV4_GPIO_LED_WAN	13
-#define TL_WR741NDV4_GPIO_LED_LAN1	14
-#define TL_WR741NDV4_GPIO_LED_LAN2	15
-#define TL_WR741NDV4_GPIO_LED_LAN3	16
-#define TL_WR741NDV4_GPIO_LED_LAN4	17
-
-#define TL_WR741NDV4_GPIO_LED_SYSTEM	27
-
-#define TL_WR741NDV4_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr741ndv4_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wr741ndv4_flash_data = {
-	.part_probes	= tl_wr741ndv4_part_probes,
-};
-
-static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:lan1",
-		.gpio		= TL_WR741NDV4_GPIO_LED_LAN1,
-		.active_low	= 0,
-	}, {
-		.name		= "tp-link:green:lan2",
-		.gpio		= TL_WR741NDV4_GPIO_LED_LAN2,
-		.active_low	= 0,
-	}, {
-		.name		= "tp-link:green:lan3",
-		.gpio		= TL_WR741NDV4_GPIO_LED_LAN3,
-		.active_low	= 0,
-	}, {
-		.name		= "tp-link:green:lan4",
-		.gpio		= TL_WR741NDV4_GPIO_LED_LAN4,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_WR741NDV4_GPIO_LED_QSS,
-		.active_low	= 0,
-	}, {
-		.name		= "tp-link:green:system",
-		.gpio		= TL_WR741NDV4_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:wan",
-		.gpio		= TL_WR741NDV4_GPIO_LED_WAN,
-		.active_low	= 0,
-	}, {
-		.name		= "tp-link:green:wlan",
-		.gpio		= TL_WR741NDV4_GPIO_LED_WLAN,
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR741NDV4_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "WPS",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR741NDV4_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static void __init tl_wr741ndv4_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
-
-	t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
-	t |= (AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
-	__raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
-static void __init tl_wr741ndv4_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	tl_wr741ndv4_gmac_setup();
-
-	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				    AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				    AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				    AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				    AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio),
-				 tl_wr741ndv4_leds_gpio);
-
-	ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
-					tl_wr741ndv4_gpio_keys);
-
-	ath79_register_m25p80(&tl_wr741ndv4_flash_data);
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
-	ath79_register_mdio(0, 0x0);
-	ath79_register_eth(1);
-	ath79_register_eth(0);
-
-	ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
-	     "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c
deleted file mode 100644
index 5931654bbd..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr741nd.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *  TP-LINK TL-WR741ND board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define TL_WR741ND_GPIO_LED_QSS		0
-#define TL_WR741ND_GPIO_LED_SYSTEM	1
-#define TL_WR741ND_GPIO_LED_LAN1	13
-#define TL_WR741ND_GPIO_LED_LAN2	14
-#define TL_WR741ND_GPIO_LED_LAN3	15
-#define TL_WR741ND_GPIO_LED_LAN4	16
-#define TL_WR741ND_GPIO_LED_WAN		17
-
-#define TL_WR741ND_GPIO_BTN_RESET	11
-#define TL_WR741ND_GPIO_BTN_QSS		12
-
-#define TL_WR741ND_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr741nd_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wr741nd_flash_data = {
-	.part_probes	= tl_wr741nd_part_probes,
-};
-
-static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:lan1",
-		.gpio		= TL_WR741ND_GPIO_LED_LAN1,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:lan2",
-		.gpio		= TL_WR741ND_GPIO_LED_LAN2,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:lan3",
-		.gpio		= TL_WR741ND_GPIO_LED_LAN3,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:lan4",
-		.gpio		= TL_WR741ND_GPIO_LED_LAN4,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_WR741ND_GPIO_LED_QSS,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:system",
-		.gpio		= TL_WR741ND_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:green:wan",
-		.gpio		= TL_WR741ND_GPIO_LED_WAN,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR741ND_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "qss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR741ND_GPIO_BTN_QSS,
-		.active_low	= 1,
-	}
-};
-
-static void __init tl_wr741nd_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_m25p80(&tl_wr741nd_flash_data);
-
-	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
-				 tl_wr741nd_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wr741nd_gpio_keys),
-					tl_wr741nd_gpio_keys);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
-	ath79_register_mdio(0, 0x0);
-
-	/* LAN ports */
-	ath79_register_eth(1);
-
-	/* WAN port */
-	ath79_register_eth(0);
-
-	ap9x_pci_setup_wmac_led_pin(0, 1);
-	ap91_pci_init(ee, mac);
-}
-MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
-	     tl_wr741nd_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c
deleted file mode 100644
index 11f853f057..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr841n.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *  TP-LINK TL-WR841N/ND v1 board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define TL_WR841ND_V1_GPIO_LED_SYSTEM		2
-#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN	4
-#define TL_WR841ND_V1_GPIO_LED_QSS_RED		5
-
-#define TL_WR841ND_V1_GPIO_BTN_RESET		3
-#define TL_WR841ND_V1_GPIO_BTN_QSS		7
-
-#define TL_WR841ND_V1_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \
-				(3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition tl_wr841n_v1_partitions[] = {
-	{
-		.name		= "redboot",
-		.offset		= 0,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x020000,
-		.size		= 0x140000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x160000,
-		.size		= 0x280000,
-	}, {
-		.name		= "config",
-		.offset		= 0x3e0000,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x020000,
-		.size		= 0x3c0000,
-	}
-};
-
-static struct flash_platform_data tl_wr841n_v1_flash_data = {
-	.parts		= tl_wr841n_v1_partitions,
-	.nr_parts	= ARRAY_SIZE(tl_wr841n_v1_partitions),
-};
-
-static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:system",
-		.gpio		= TL_WR841ND_V1_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:red:qss",
-		.gpio		= TL_WR841ND_V1_GPIO_LED_QSS_RED,
-	}, {
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_WR841ND_V1_GPIO_LED_QSS_GREEN,
-	}
-};
-
-static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR841ND_V1_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "qss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR841ND_V1_GPIO_BTN_QSS,
-		.active_low	= 1,
-	}
-};
-
-static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
-	.port_names[0]  = "wan",
-	.port_names[1]  = "lan1",
-	.port_names[2]  = "lan2",
-	.port_names[3]  = "lan3",
-	.port_names[4]  = "lan4",
-	.port_names[5]  = "cpu",
-};
-
-static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
-	.nr_chips	= 1,
-	.chip		= &tl_wr841n_v1_dsa_chip,
-};
-
-static void __init tl_wr841n_v1_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-	ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
-			   &tl_wr841n_v1_dsa_data);
-
-	ath79_register_m25p80(&tl_wr841n_v1_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
-				 tl_wr841n_v1_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wr841n_v1_gpio_keys),
-					tl_wr841n_v1_gpio_keys);
-	ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
-	     tl_wr841n_v1_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c
deleted file mode 100644
index 1ddeec730e..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-tl-wr941nd.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  TP-LINK TL-WR941ND board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR941ND_GPIO_LED_SYSTEM	2
-#define TL_WR941ND_GPIO_LED_QSS_RED	4
-#define TL_WR941ND_GPIO_LED_QSS_GREEN	5
-#define TL_WR941ND_GPIO_LED_WLAN	9
-
-#define TL_WR941ND_GPIO_BTN_RESET	3
-#define TL_WR941ND_GPIO_BTN_QSS		7
-
-#define TL_WR941ND_KEYS_POLL_INTERVAL	20	/* msecs */
-#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr941nd_part_probes[] = {
-	"tp-link",
-	NULL,
-};
-
-static struct flash_platform_data tl_wr941nd_flash_data = {
-	.part_probes	= tl_wr941nd_part_probes,
-};
-
-static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
-	{
-		.name		= "tp-link:green:system",
-		.gpio		= TL_WR941ND_GPIO_LED_SYSTEM,
-		.active_low	= 1,
-	}, {
-		.name		= "tp-link:red:qss",
-		.gpio		= TL_WR941ND_GPIO_LED_QSS_RED,
-	}, {
-		.name		= "tp-link:green:qss",
-		.gpio		= TL_WR941ND_GPIO_LED_QSS_GREEN,
-	}, {
-		.name		= "tp-link:green:wlan",
-		.gpio		= TL_WR941ND_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR941ND_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "qss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= TL_WR941ND_GPIO_BTN_QSS,
-		.active_low	= 1,
-	}
-};
-
-static struct dsa_chip_data tl_wr941nd_dsa_chip = {
-	.port_names[0]  = "wan",
-	.port_names[1]  = "lan1",
-	.port_names[2]  = "lan2",
-	.port_names[3]  = "lan3",
-	.port_names[4]  = "lan4",
-	.port_names[5]  = "cpu",
-};
-
-static struct dsa_platform_data tl_wr941nd_dsa_data = {
-	.nr_chips	= 1,
-	.chip		= &tl_wr941nd_dsa_chip,
-};
-
-static void __init tl_wr941nd_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-	ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
-			   &tl_wr941nd_dsa_data);
-
-	ath79_register_m25p80(&tl_wr941nd_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
-				 tl_wr941nd_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(tl_wr941nd_gpio_keys),
-					tl_wr941nd_gpio_keys);
-	ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
-	     tl_wr941nd_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c
deleted file mode 100644
index e49ac23fd1..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ubnt.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- *  Ubiquiti RouterStation support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *  Copyright (C) 2008 Ubiquiti <support@ubnt.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define UBNT_RS_GPIO_LED_RF	2
-#define UBNT_RS_GPIO_SW4	8
-
-#define UBNT_LS_SR71_GPIO_LED_D25	0
-#define UBNT_LS_SR71_GPIO_LED_D26	1
-#define UBNT_LS_SR71_GPIO_LED_D24	2
-#define UBNT_LS_SR71_GPIO_LED_D23	4
-#define UBNT_LS_SR71_GPIO_LED_D22	5
-#define UBNT_LS_SR71_GPIO_LED_D27	6
-#define UBNT_LS_SR71_GPIO_LED_D28	7
-
-#define UBNT_KEYS_POLL_INTERVAL		20	/* msecs */
-#define UBNT_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
-	{
-		.name		= "ubnt:green:rf",
-		.gpio		= UBNT_RS_GPIO_LED_RF,
-		.active_low	= 0,
-	}
-};
-
-static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
-	{
-		.name		= "ubnt:green:d22",
-		.gpio		= UBNT_LS_SR71_GPIO_LED_D22,
-		.active_low	= 0,
-	}, {
-		.name		= "ubnt:green:d23",
-		.gpio		= UBNT_LS_SR71_GPIO_LED_D23,
-		.active_low	= 0,
-	}, {
-		.name		= "ubnt:green:d24",
-		.gpio		= UBNT_LS_SR71_GPIO_LED_D24,
-		.active_low	= 0,
-	}, {
-		.name		= "ubnt:red:d25",
-		.gpio		= UBNT_LS_SR71_GPIO_LED_D25,
-		.active_low	= 0,
-	}, {
-		.name		= "ubnt:red:d26",
-		.gpio		= UBNT_LS_SR71_GPIO_LED_D26,
-		.active_low	= 0,
-	}, {
-		.name		= "ubnt:green:d27",
-		.gpio		= UBNT_LS_SR71_GPIO_LED_D27,
-		.active_low	= 0,
-	}, {
-		.name		= "ubnt:green:d28",
-		.gpio		= UBNT_LS_SR71_GPIO_LED_D28,
-		.active_low	= 0,
-	}
-};
-
-static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
-	{
-		.desc		= "sw4",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= UBNT_RS_GPIO_SW4,
-		.active_low	= 1,
-	}
-};
-
-static const char *ubnt_part_probes[] = {
-	"RedBoot",
-	NULL,
-};
-
-static struct flash_platform_data ubnt_flash_data = {
-	.part_probes	= ubnt_part_probes,
-};
-
-static void __init ubnt_generic_setup(void)
-{
-	ath79_register_m25p80(&ubnt_flash_data);
-
-	ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(ubnt_gpio_keys),
-					ubnt_gpio_keys);
-	ath79_register_pci();
-}
-
-#define UBNT_RS_WAN_PHYMASK	BIT(20)
-#define UBNT_RS_LAN_PHYMASK	(BIT(16) | BIT(17) | BIT(18) | BIT(19))
-
-static void __init ubnt_rs_setup(void)
-{
-	ubnt_generic_setup();
-
-	ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
-
-	/*
-	 * There is Secondary MAC address duplicate problem with some
-	 * UBNT HW batches.  Do not increase Secondary MAC address by 1
-	 * but do workaround with 'Locally Administrated' bit.
-	 */
-	ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.speed = SPEED_100;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_usb();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
-				 ubnt_rs_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
-	     ubnt_rs_setup);
-
-#define UBNT_RSPRO_WAN_PHYMASK	BIT(4)
-#define UBNT_RSPRO_LAN_PHYMASK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-static void __init ubnt_rspro_setup(void)
-{
-	ubnt_generic_setup();
-
-	ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
-				 UBNT_RSPRO_LAN_PHYMASK));
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
-
-	/*
-	 * There is Secondary MAC address duplicate problem with some
-	 * UBNT HW batches.  Do not increase Secondary MAC address by 1
-	 * but do workaround with 'Locally Administrated' bit.
-	 */
-	ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
-	ath79_eth1_data.speed = SPEED_1000;
-	ath79_eth1_data.duplex = DUPLEX_FULL;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_usb();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
-				 ubnt_rs_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
-	     ubnt_rspro_setup);
-
-static void __init ubnt_lsx_setup(void)
-{
-	ubnt_generic_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
-
-#define UBNT_LSSR71_PHY_MASK	BIT(1)
-
-static void __init ubnt_lssr71_setup(void)
-{
-	ubnt_generic_setup();
-
-	ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
-
-	ath79_register_eth(0);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
-				 ubnt_ls_sr71_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
-	     ubnt_lssr71_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c
deleted file mode 100644
index 3e3924b877..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-whr-hp-g300n.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- *  Buffalo WHR-HP-G300N board support
- *
- *  based on ...
- *
- *  TP-LINK TL-WR741ND board support
- *
- *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define WHRHPG300N_GPIO_LED_SECURITY		0
-#define WHRHPG300N_GPIO_LED_DIAG		1
-#define WHRHPG300N_GPIO_LED_ROUTER		6
-
-#define WHRHPG300N_GPIO_BTN_ROUTER_ON		7
-#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO		8
-#define WHRHPG300N_GPIO_BTN_RESET		11
-#define WHRHPG300N_GPIO_BTN_AOSS		12
-#define WHRHPG300N_GPIO_LED_LAN1		13
-#define WHRHPG300N_GPIO_LED_LAN2		14
-#define WHRHPG300N_GPIO_LED_LAN3		15
-#define WHRHPG300N_GPIO_LED_LAN4		16
-#define WHRHPG300N_GPIO_LED_WAN			17
-
-#define	WHRHPG300N_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
-
-#define WHRHPG300N_MAC_OFFSET		0x20c
-
-static struct mtd_partition whrhpg300n_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x03e000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x03e000,
-		.size		= 0x002000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x040000,
-		.size		= 0x0e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x120000,
-		.size		= 0x2c0000,
-	}, {
-		.name		= "user_property",
-		.offset		= 0x3e0000,
-		.size		= 0x010000,
-	}, {
-		.name		= "ART",
-		.offset		= 0x3f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x040000,
-		.size		= 0x3a0000,
-	}
-};
-
-static struct flash_platform_data whrhpg300n_flash_data = {
-	.parts		= whrhpg300n_partitions,
-	.nr_parts	= ARRAY_SIZE(whrhpg300n_partitions),
-};
-
-static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
-	{
-		.name		= "buffalo:orange:security",
-		.gpio		= WHRHPG300N_GPIO_LED_SECURITY,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:red:diag",
-		.gpio		= WHRHPG300N_GPIO_LED_DIAG,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:router",
-		.gpio		= WHRHPG300N_GPIO_LED_ROUTER,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:wan",
-		.gpio		= WHRHPG300N_GPIO_LED_WAN,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:lan1",
-		.gpio		= WHRHPG300N_GPIO_LED_LAN1,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:lan2",
-		.gpio		= WHRHPG300N_GPIO_LED_LAN2,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:lan3",
-		.gpio		= WHRHPG300N_GPIO_LED_LAN3,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:lan4",
-		.gpio		= WHRHPG300N_GPIO_LED_LAN4,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WHRHPG300N_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "aoss/wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= WHRHPG300N_GPIO_BTN_AOSS,
-		.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
-		.active_low	= 1,
-	}, {
-		.desc		= "router_on",
-		.type		= EV_KEY,
-		.code		= BTN_2,
-		.gpio		= WHRHPG300N_GPIO_BTN_ROUTER_ON,
-		.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
-		.active_low	= 1,
-	}, {
-		.desc		= "router_auto",
-		.type		= EV_KEY,
-		.code		= BTN_3,
-		.gpio		= WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
-		.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
-		.active_low	= 1,
-	}
-};
-
-static void __init whrhpg300n_setup(void)
-{
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
-
-	ath79_register_m25p80(&whrhpg300n_flash_data);
-
-	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
-				 whrhpg300n_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(whrhpg300n_gpio_keys),
-					whrhpg300n_gpio_keys);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
-	ath79_register_mdio(0, 0x0);
-
-	/* LAN ports */
-	ath79_register_eth(1);
-	/* WAN port */
-	ath79_register_eth(0);
-
-	ap9x_pci_setup_wmac_led_pin(0, 1);
-
-	ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
-	     whrhpg300n_setup);
-
-MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N",
-	     whrhpg300n_setup);
-
-MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN",
-	     whrhpg300n_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c
deleted file mode 100644
index fccf1c6633..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wndr3700.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *  Netgear WNDR3700 board support
- *
- *  Copyright (C) 2009 Marco Porsch
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WNDR3700_GPIO_LED_WPS_ORANGE	0
-#define WNDR3700_GPIO_LED_POWER_ORANGE	1
-#define WNDR3700_GPIO_LED_POWER_GREEN	2
-#define WNDR3700_GPIO_LED_WPS_GREEN	4
-#define WNDR3700_GPIO_LED_WAN_GREEN	6
-
-#define WNDR3700_GPIO_BTN_WPS		3
-#define WNDR3700_GPIO_BTN_RESET		8
-#define WNDR3700_GPIO_BTN_WIFI		11
-
-#define WNDR3700_GPIO_RTL8366_SDA	5
-#define WNDR3700_GPIO_RTL8366_SCK	7
-
-#define WNDR3700_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL)
-
-#define WNDR3700_ETH0_MAC_OFFSET	0
-#define WNDR3700_ETH1_MAC_OFFSET	0x6
-
-#define WNDR3700_WMAC0_MAC_OFFSET	0
-#define WNDR3700_WMAC1_MAC_OFFSET	0xc
-#define WNDR3700_CALDATA0_OFFSET	0x1000
-#define WNDR3700_CALDATA1_OFFSET	0x5000
-
-static struct gpio_led wndr3700_leds_gpio[] __initdata = {
-	{
-		.name		= "wndr3700:green:power",
-		.gpio		= WNDR3700_GPIO_LED_POWER_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "wndr3700:orange:power",
-		.gpio		= WNDR3700_GPIO_LED_POWER_ORANGE,
-		.active_low	= 1,
-	}, {
-		.name		= "wndr3700:green:wps",
-		.gpio		= WNDR3700_GPIO_LED_WPS_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "wndr3700:orange:wps",
-		.gpio		= WNDR3700_GPIO_LED_WPS_ORANGE,
-		.active_low	= 1,
-	}, {
-		.name		= "wndr3700:green:wan",
-		.gpio		= WNDR3700_GPIO_LED_WAN_GREEN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WNDR3700_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WNDR3700_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}, {
-		.desc		= "wifi",
-		.type		= EV_KEY,
-		.code		= BTN_2,
-		.debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WNDR3700_GPIO_BTN_WIFI,
-		.active_low	= 1,
-	}
-};
-
-static struct rtl8366_platform_data wndr3700_rtl8366s_data = {
-	.gpio_sda	= WNDR3700_GPIO_RTL8366_SDA,
-	.gpio_sck	= WNDR3700_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device wndr3700_rtl8366s_device = {
-	.name		= RTL8366S_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &wndr3700_rtl8366s_data,
-	}
-};
-
-static void __init wndr3700_setup(void)
-{
-	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	/*
-	 * The eth0 and wmac0 interfaces share the same MAC address which
-	 * can lead to problems if operated unbridged. Set the locally
-	 * administered bit on the eth0 MAC to make it unique.
-	 */
-	ath79_init_local_mac(ath79_eth0_data.mac_addr,
-			     art + WNDR3700_ETH0_MAC_OFFSET);
-	ath79_eth0_pll_data.pll_1000 = 0x11110000;
-	ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr,
-			art + WNDR3700_ETH1_MAC_OFFSET, 0);
-	ath79_eth1_pll_data.pll_1000 = 0x11110000;
-	ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = 0x10;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_usb();
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
-				 wndr3700_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(wndr3700_gpio_keys),
-					wndr3700_gpio_keys);
-
-	platform_device_register(&wndr3700_rtl8366s_device);
-	platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
-
-	ap9x_pci_setup_wmac_led_pin(0, 5);
-	ap9x_pci_setup_wmac_led_pin(1, 5);
-
-	/* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */
-	ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6));
-
-	/* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */
-	ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6));
-
-	ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
-		      art + WNDR3700_WMAC0_MAC_OFFSET,
-		      art + WNDR3700_CALDATA1_OFFSET,
-		      art + WNDR3700_WMAC1_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700",
-	     "NETGEAR WNDR3700/WNDR3800/WNDRMAC",
-	     wndr3700_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c
deleted file mode 100644
index bd86db386a..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wnr2000.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  NETGEAR WNR2000 board support
- *
- *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *  Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WNR2000_GPIO_LED_PWR_GREEN	14
-#define WNR2000_GPIO_LED_PWR_AMBER	7
-#define WNR2000_GPIO_LED_WPS		4
-#define WNR2000_GPIO_LED_WLAN		6
-#define WNR2000_GPIO_BTN_RESET		21
-#define WNR2000_GPIO_BTN_WPS		8
-
-#define WNR2000_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WNR2000_KEYS_DEBOUNCE_INTERVAL	(3 * WNR2000_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wnr2000_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x040000,
-		.size		= 0x010000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x050000,
-		.size		= 0x240000,
-	}, {
-		.name		= "user-config",
-		.offset		= 0x290000,
-		.size		= 0x010000,
-	}, {
-		.name		= "uImage",
-		.offset		= 0x2a0000,
-		.size		= 0x120000,
-	}, {
-		.name		= "language_table",
-		.offset		= 0x3c0000,
-		.size		= 0x020000,
-	}, {
-		.name		= "rootfs_checksum",
-		.offset		= 0x3e0000,
-		.size		= 0x010000,
-	}, {
-		.name		= "art",
-		.offset		= 0x3f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data wnr2000_flash_data = {
-	.parts		= wnr2000_partitions,
-	.nr_parts	= ARRAY_SIZE(wnr2000_partitions),
-};
-
-static struct gpio_led wnr2000_leds_gpio[] __initdata = {
-	{
-		.name		= "wnr2000:green:power",
-		.gpio		= WNR2000_GPIO_LED_PWR_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "wnr2000:amber:power",
-		.gpio		= WNR2000_GPIO_LED_PWR_AMBER,
-		.active_low	= 1,
-	}, {
-		.name		= "wnr2000:green:wps",
-		.gpio		= WNR2000_GPIO_LED_WPS,
-		.active_low	= 1,
-	}, {
-		.name		= "wnr2000:blue:wlan",
-		.gpio		= WNR2000_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WNR2000_GPIO_BTN_RESET,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WNR2000_GPIO_BTN_WPS,
-	}
-};
-
-static void __init wnr2000_setup(void)
-{
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.has_ar8216 = 1;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = 0x10;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(&wnr2000_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
-				 wnr2000_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(wnr2000_gpio_keys),
-					wnr2000_gpio_keys);
-
-	ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c
deleted file mode 100644
index 148cd7c7f2..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wp543.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *  Compex WP543/WPJ543 board support
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define WP543_GPIO_SW6		2
-#define WP543_GPIO_LED_1	3
-#define WP543_GPIO_LED_2	4
-#define WP543_GPIO_LED_WLAN	5
-#define WP543_GPIO_LED_CONN	6
-#define WP543_GPIO_LED_DIAG	7
-#define WP543_GPIO_SW4		8
-
-#define WP543_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WP543_KEYS_DEBOUNCE_INTERVAL	(3 * WP543_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wp543_leds_gpio[] __initdata = {
-	{
-		.name		= "wp543:green:led1",
-		.gpio		= WP543_GPIO_LED_1,
-		.active_low	= 1,
-	}, {
-		.name		= "wp543:green:led2",
-		.gpio		= WP543_GPIO_LED_2,
-		.active_low	= 1,
-	}, {
-		.name		= "wp543:green:wlan",
-		.gpio		= WP543_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}, {
-		.name		= "wp543:green:conn",
-		.gpio		= WP543_GPIO_LED_CONN,
-		.active_low	= 1,
-	}, {
-		.name		= "wp543:green:diag",
-		.gpio		= WP543_GPIO_LED_DIAG,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
-	{
-		.desc		= "sw6",
-		.type		= EV_KEY,
-		.code		= BTN_0,
-		.debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WP543_GPIO_SW6,
-	}, {
-		.desc		= "sw4",
-		.type		= EV_KEY,
-		.code		= BTN_1,
-		.debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WP543_GPIO_SW4,
-	}
-};
-
-static const char *wp543_part_probes[] = {
-	"MyLoader",
-	NULL,
-};
-
-static struct flash_platform_data wp543_flash_data = {
-	.part_probes	= wp543_part_probes,
-};
-
-static void __init wp543_setup(void)
-{
-	ath79_register_m25p80(&wp543_flash_data);
-
-	ath79_register_mdio(0, 0xfffffff0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = 0x0f;
-	ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
-				    AR71XX_RESET_GE0_PHY;
-	ath79_register_eth(0);
-
-	ath79_register_usb();
-	ath79_register_pci();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
-					wp543_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(wp543_gpio_keys),
-					 wp543_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wpe72.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wpe72.c
deleted file mode 100644
index 114d6233c3..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wpe72.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- *  Compex WPE72 board support
- *
- *  Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include<asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define WPE72_GPIO_RESET	12
-#define WPE72_GPIO_LED_DIAG	13
-#define WPE72_GPIO_LED_1	14
-#define WPE72_GPIO_LED_2	15
-#define WPE72_GPIO_LED_3	16
-#define WPE72_GPIO_LED_4	17
-
-#define WPE72_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WPE72_KEYS_DEBOUNCE_INTERVAL	(3 * WPE72_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wpe72_leds_gpio[] __initdata = {
-	{
-		.name		= "wpe72:green:led1",
-		.gpio		= WPE72_GPIO_LED_1,
-		.active_low	= 1,
-	}, {
-		.name		= "wpe72:green:led2",
-		.gpio		= WPE72_GPIO_LED_2,
-		.active_low	= 1,
-	}, {
-		.name		= "wpe72:green:led3",
-		.gpio		= WPE72_GPIO_LED_3,
-		.active_low	= 1,
-	}, {
-		.name		= "wpe72:green:led4",
-		.gpio		= WPE72_GPIO_LED_4,
-		.active_low	= 1,
-	}, {
-		.name		= "wpe72:green:diag",
-		.gpio		= WPE72_GPIO_LED_DIAG,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
-	{
-		.desc           = "reset",
-		.type           = EV_KEY,
-		.code           = KEY_RESTART,
-		.debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
-		.gpio           = WPE72_GPIO_RESET,
-	}
-};
-
-static const char *wpe72_part_probes[] = {
-	"MyLoader",
-	NULL,
-};
-
-static struct flash_platform_data wpe72_flash_data = {
-	.part_probes	= wpe72_part_probes,
-};
-
-static void __init wpe72_setup(void)
-{
-	ath79_register_m25p80(&wpe72_flash_data);
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_usb();
-	ath79_register_pci();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
-				 wpe72_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(wpe72_gpio_keys),
-					wpe72_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c
deleted file mode 100644
index 21aefe00a0..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt160nl.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *  Linksys WRT160NL board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "nvram.h"
-#include "machtypes.h"
-
-#define WRT160NL_GPIO_LED_POWER		14
-#define WRT160NL_GPIO_LED_WPS_AMBER	9
-#define WRT160NL_GPIO_LED_WPS_BLUE	8
-#define WRT160NL_GPIO_LED_WLAN		6
-
-#define WRT160NL_GPIO_BTN_WPS		7
-#define WRT160NL_GPIO_BTN_RESET		21
-
-#define WRT160NL_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WRT160NL_KEYS_DEBOUNCE_INTERVAL	(3 * WRT160NL_KEYS_POLL_INTERVAL)
-
-#define WRT160NL_NVRAM_ADDR	0x1f7e0000
-#define WRT160NL_NVRAM_SIZE	0x10000
-
-static const char *wrt160nl_part_probes[] = {
-	"wrt160nl",
-	NULL,
-};
-
-static struct flash_platform_data wrt160nl_flash_data = {
-	.part_probes	= wrt160nl_part_probes,
-};
-
-static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
-	{
-		.name		= "wrt160nl:blue:power",
-		.gpio		= WRT160NL_GPIO_LED_POWER,
-		.active_low	= 1,
-		.default_trigger = "default-on",
-	}, {
-		.name		= "wrt160nl:amber:wps",
-		.gpio		= WRT160NL_GPIO_LED_WPS_AMBER,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt160nl:blue:wps",
-		.gpio		= WRT160NL_GPIO_LED_WPS_BLUE,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt160nl:blue:wlan",
-		.gpio		= WRT160NL_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WRT160NL_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WRT160NL_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static void __init wrt160nl_setup(void)
-{
-	const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 mac[6];
-
-	if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
-				       "lan_hwaddr=", mac) == 0) {
-		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-	}
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.phy_mask = 0x01;
-
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = 0x10;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(&wrt160nl_flash_data);
-
-	ath79_register_usb();
-
-	if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
-				       "wl0_hwaddr=", mac) == 0)
-		ath79_register_wmac(eeprom, mac);
-	else
-		ath79_register_wmac(eeprom, NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
-				 wrt160nl_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(wrt160nl_gpio_keys),
-					wrt160nl_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL",
-	     wrt160nl_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c
deleted file mode 100644
index 6c4c1cb0d6..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wrt400n.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- *  Linksys WRT400N board support
- *
- *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define WRT400N_GPIO_LED_POWER		1
-#define WRT400N_GPIO_LED_WPS_BLUE	4
-#define WRT400N_GPIO_LED_WPS_AMBER	5
-#define WRT400N_GPIO_LED_WLAN		6
-
-#define WRT400N_GPIO_BTN_RESET		8
-#define WRT400N_GPIO_BTN_WLSEC		3
-
-#define WRT400N_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WRT400N_KEYS_DEBOUNE_INTERVAL	(3 * WRT400N_KEYS_POLL_INTERVAL)
-
-#define WRT400N_MAC_ADDR_OFFSET		0x120c
-#define WRT400N_CALDATA0_OFFSET		0x1000
-#define WRT400N_CALDATA1_OFFSET		0x5000
-
-static struct mtd_partition wrt400n_partitions[] = {
-	{
-		.name		= "uboot",
-		.offset		= 0,
-		.size		= 0x030000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "env",
-		.offset		= 0x030000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "linux",
-		.offset		= 0x040000,
-		.size		= 0x140000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x180000,
-		.size		= 0x630000,
-	}, {
-		.name		= "nvram",
-		.offset		= 0x7b0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "factory",
-		.offset		= 0x7c0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "language",
-		.offset		= 0x7d0000,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "caldata",
-		.offset		= 0x7f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x040000,
-		.size		= 0x770000,
-	}
-};
-
-static struct flash_platform_data wrt400n_flash_data = {
-	.parts		= wrt400n_partitions,
-	.nr_parts	= ARRAY_SIZE(wrt400n_partitions),
-};
-
-static struct gpio_led wrt400n_leds_gpio[] __initdata = {
-	{
-		.name		= "wrt400n:blue:wps",
-		.gpio		= WRT400N_GPIO_LED_WPS_BLUE,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt400n:amber:wps",
-		.gpio		= WRT400N_GPIO_LED_WPS_AMBER,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt400n:blue:wlan",
-		.gpio		= WRT400N_GPIO_LED_WLAN,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt400n:blue:power",
-		.gpio		= WRT400N_GPIO_LED_POWER,
-		.active_low	= 0,
-		.default_trigger = "default-on",
-	}
-};
-
-static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
-		.gpio		= WRT400N_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wlsec",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
-		.gpio		= WRT400N_GPIO_BTN_WLSEC,
-		.active_low	= 1,
-	}
-};
-
-static void __init wrt400n_setup(void)
-{
-	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-	u8 *mac = art + WRT400N_MAC_ADDR_OFFSET;
-
-	ath79_register_mdio(0, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth0_data.speed = SPEED_100;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ath79_eth1_data.phy_mask = 0x10;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_m25p80(&wrt400n_flash_data);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
-				 wrt400n_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(wrt400n_gpio_keys),
-					wrt400n_gpio_keys);
-
-	ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
-		      art + WRT400N_CALDATA1_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c
deleted file mode 100644
index 1223e842d8..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-ag300h.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- *  Buffalo WZR-HP-AG300H board support
- *
- *  Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPAG300H_MAC_OFFSET		0x20c
-#define WZRHPAG300H_KEYS_POLL_INTERVAL	20      /* msecs */
-#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpag300h_flash_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x0040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x0040000,
-		.size		= 0x0010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "art",
-		.offset		= 0x0050000,
-		.size		= 0x0010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x0060000,
-		.size		= 0x0100000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x0160000,
-		.size		= 0x1e90000,
-	}, {
-		.name		= "user_property",
-		.offset		= 0x1ff0000,
-		.size		= 0x0010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x0060000,
-		.size		= 0x1f90000,
-	}
-};
-
-static struct flash_platform_data wzrhpag300h_flash_data = {
-	.parts      = wzrhpag300h_flash_partitions,
-	.nr_parts   = ARRAY_SIZE(wzrhpag300h_flash_partitions),
-};
-
-static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
-	{
-		.name		= "buffalo:red:diag",
-		.gpio		= 1,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 11,
-		.active_low	= 1,
-	}, {
-		.desc		= "usb",
-		.type		= EV_KEY,
-		.code		= BTN_2,
-		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 3,
-		.active_low	= 1,
-	}, {
-		.desc		= "aoss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 5,
-		.active_low	= 1,
-	}, {
-		.desc		= "router_auto",
-		.type		= EV_KEY,
-		.code		= BTN_6,
-		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.desc		= "router_off",
-		.type		= EV_KEY,
-		.code		= BTN_5,
-		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 7,
-		.active_low	= 1,
-	}
-};
-
-static void __init wzrhpag300h_setup(void)
-{
-	u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
-	u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
-	u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
-	u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
-
-	ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = BIT(4);
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_usb();
-	gpio_request(2, "usb");
-	gpio_direction_output(2, 1);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
-					wzrhpag300h_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(wzrhpag300h_gpio_keys),
-					 wzrhpag300h_gpio_keys);
-
-	ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
-
-	ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
-	     "Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
-
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c
deleted file mode 100644
index 94f352aced..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  Buffalo WZR-HP-G300NH board support
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/nxp_74hc153.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WZRHPG300NH_GPIO_LED_USB	0
-#define WZRHPG300NH_GPIO_LED_DIAG	1
-#define WZRHPG300NH_GPIO_LED_WIRELESS	6
-#define WZRHPG300NH_GPIO_LED_SECURITY	17
-#define WZRHPG300NH_GPIO_LED_ROUTER	18
-
-#define WZRHPG300NH_GPIO_RTL8366_SDA	19
-#define WZRHPG300NH_GPIO_RTL8366_SCK	20
-
-#define WZRHPG300NH_GPIO_74HC153_S0	9
-#define WZRHPG300NH_GPIO_74HC153_S1	11
-#define WZRHPG300NH_GPIO_74HC153_1Y	12
-#define WZRHPG300NH_GPIO_74HC153_2Y	14
-
-#define WZRHPG300NH_GPIO_EXP_BASE	32
-#define WZRHPG300NH_GPIO_BTN_AOSS	(WZRHPG300NH_GPIO_EXP_BASE + 0)
-#define WZRHPG300NH_GPIO_BTN_RESET	(WZRHPG300NH_GPIO_EXP_BASE + 1)
-#define WZRHPG300NH_GPIO_BTN_ROUTER_ON	(WZRHPG300NH_GPIO_EXP_BASE + 2)
-#define WZRHPG300NH_GPIO_BTN_QOS_ON	(WZRHPG300NH_GPIO_EXP_BASE + 3)
-#define WZRHPG300NH_GPIO_BTN_USB	(WZRHPG300NH_GPIO_EXP_BASE + 5)
-#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
-#define WZRHPG300NH_GPIO_BTN_QOS_OFF	(WZRHPG300NH_GPIO_EXP_BASE + 7)
-
-#define WZRHPG300NH_KEYS_POLL_INTERVAL	20	/* msecs */
-#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL)
-
-#define WZRHPG300NH_MAC_OFFSET		0x20c
-
-static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x0040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x0040000,
-		.size		= 0x0020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x0060000,
-		.size		= 0x0100000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x0160000,
-		.size		= 0x1e60000,
-	}, {
-		.name		= "user_property",
-		.offset		= 0x1fc0000,
-		.size		= 0x0020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "art",
-		.offset		= 0x1fe0000,
-		.size		= 0x0020000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x0060000,
-		.size		= 0x1f60000,
-	}
-};
-
-static struct physmap_flash_data wzrhpg300nh_flash_data = {
-	.width		= 2,
-	.parts		= wzrhpg300nh_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wzrhpg300nh_flash_partitions),
-};
-
-#define WZRHPG300NH_FLASH_BASE	0x1e000000
-#define WZRHPG300NH_FLASH_SIZE	(32 * 1024 * 1024)
-
-static struct resource wzrhpg300nh_flash_resources[] = {
-	[0] = {
-		.start	= WZRHPG300NH_FLASH_BASE,
-		.end	= WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device wzrhpg300nh_flash_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= wzrhpg300nh_flash_resources,
-	.num_resources	= ARRAY_SIZE(wzrhpg300nh_flash_resources),
-	.dev		= {
-		.platform_data = &wzrhpg300nh_flash_data,
-	}
-};
-
-static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
-	{
-		.name		= "buffalo:orange:security",
-		.gpio		= WZRHPG300NH_GPIO_LED_SECURITY,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:wireless",
-		.gpio		= WZRHPG300NH_GPIO_LED_WIRELESS,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:router",
-		.gpio		= WZRHPG300NH_GPIO_LED_ROUTER,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:red:diag",
-		.gpio		= WZRHPG300NH_GPIO_LED_DIAG,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:blue:usb",
-		.gpio		= WZRHPG300NH_GPIO_LED_USB,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WZRHPG300NH_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "aoss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WZRHPG300NH_GPIO_BTN_AOSS,
-		.active_low	= 1,
-	}, {
-		.desc		= "usb",
-		.type		= EV_KEY,
-		.code		= BTN_2,
-		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WZRHPG300NH_GPIO_BTN_USB,
-		.active_low	= 1,
-	}, {
-		.desc		= "qos_on",
-		.type		= EV_KEY,
-		.code		= BTN_3,
-		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WZRHPG300NH_GPIO_BTN_QOS_ON,
-		.active_low	= 0,
-	}, {
-		.desc		= "qos_off",
-		.type		= EV_KEY,
-		.code		= BTN_4,
-		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WZRHPG300NH_GPIO_BTN_QOS_OFF,
-		.active_low	= 0,
-	}, {
-		.desc		= "router_on",
-		.type		= EV_KEY,
-		.code		= BTN_5,
-		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WZRHPG300NH_GPIO_BTN_ROUTER_ON,
-		.active_low	= 0,
-	}, {
-		.desc		= "router_auto",
-		.type		= EV_KEY,
-		.code		= BTN_6,
-		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
-		.active_low	= 0,
-	}
-};
-
-static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
-	.gpio_base	= WZRHPG300NH_GPIO_EXP_BASE,
-	.gpio_pin_s0	= WZRHPG300NH_GPIO_74HC153_S0,
-	.gpio_pin_s1	= WZRHPG300NH_GPIO_74HC153_S1,
-	.gpio_pin_1y	= WZRHPG300NH_GPIO_74HC153_1Y,
-	.gpio_pin_2y	= WZRHPG300NH_GPIO_74HC153_2Y,
-};
-
-static struct platform_device wzrhpg300nh_74hc153_device = {
-	.name		= NXP_74HC153_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &wzrhpg300nh_74hc153_data,
-	}
-};
-
-static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = {
-	.gpio_sda	= WZRHPG300NH_GPIO_RTL8366_SDA,
-	.gpio_sck	= WZRHPG300NH_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device wzrhpg300nh_rtl8366s_device = {
-	.name		= RTL8366S_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &wzrhpg300nh_rtl8366_data,
-	}
-};
-
-static struct platform_device wzrhpg300nh_rtl8366rb_device = {
-	.name           = RTL8366RB_DRIVER_NAME,
-	.id             = -1,
-	.dev = {
-		.platform_data  = &wzrhpg300nh_rtl8366_data,
-	}
-};
-
-static void __init wzrhpg300nh_setup(void)
-{
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
-	bool hasrtl8366rb = false;
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
-	if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB)
-		hasrtl8366rb = true;
-
-	if (hasrtl8366rb) {
-		ath79_eth0_pll_data.pll_1000 = 0x1f000000;
-		ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
-		ath79_eth1_pll_data.pll_1000 = 0x100;
-		ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
-	} else {
-		ath79_eth0_pll_data.pll_1000 = 0x1e000100;
-		ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
-		ath79_eth1_pll_data.pll_1000 = 0x1e000100;
-		ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
-	}
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = 0x10;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_usb();
-	ath79_register_wmac(eeprom, NULL);
-
-	platform_device_register(&wzrhpg300nh_74hc153_device);
-	platform_device_register(&wzrhpg300nh_flash_device);
-
-	if (hasrtl8366rb)
-		platform_device_register(&wzrhpg300nh_rtl8366rb_device);
-	else
-		platform_device_register(&wzrhpg300nh_rtl8366s_device);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
-					wzrhpg300nh_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(wzrhpg300nh_gpio_keys),
-					 wzrhpg300nh_gpio_keys);
-
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
-	     "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c
deleted file mode 100644
index 6ccafcb49d..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g300nh2.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- *  Buffalo WZR-HP-G300NH2 board support
- *
- *  Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
- *  Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPG300NH2_MAC_OFFSET		0x20c
-#define WZRHPG300NH2_KEYS_POLL_INTERVAL     20      /* msecs */
-#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x0040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x0040000,
-		.size		= 0x0010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "art",
-		.offset		= 0x0050000,
-		.size		= 0x0010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x0060000,
-		.size		= 0x0100000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x0160000,
-		.size		= 0x1e90000,
-	}, {
-		.name		= "user_property",
-		.offset		= 0x1ff0000,
-		.size		= 0x0010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x0060000,
-		.size		= 0x1f90000,
-	}
-};
-
-static struct flash_platform_data wzrhpg300nh2_flash_data = {
-	.parts          = wzrhpg300nh2_flash_partitions,
-	.nr_parts       = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
-};
-
-static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
-	{
-		.name		= "buffalo:red:diag",
-		.gpio		= 16,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
-	{
-		.name           = "buffalo:blue:usb",
-		.gpio           = 4,
-		.active_low     = 1,
-	},
-	{
-		.name           = "buffalo:orange:security",
-		.gpio           = 6,
-		.active_low     = 1,
-	},
-	{
-		.name           = "buffalo:green:router",
-		.gpio           = 7,
-		.active_low     = 1,
-	},
-	{
-		.name           = "buffalo:blue:movie_engine_on",
-		.gpio           = 8,
-		.active_low     = 1,
-	},
-	{
-		.name           = "buffalo:blue:movie_engine_off",
-		.gpio           = 9,
-		.active_low     = 1,
-	},
-};
-
-/* The AOSS button is wmac gpio 12 */
-static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 1,
-		.active_low	= 1,
-	}, {
-		.desc		= "usb",
-		.type		= EV_KEY,
-		.code		= BTN_2,
-		.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 7,
-		.active_low	= 1,
-	}, {
-		.desc		= "qos",
-		.type		= EV_KEY,
-		.code		= BTN_3,
-		.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 11,
-		.active_low	= 0,
-	}, {
-		.desc		= "router_on",
-		.type		= EV_KEY,
-		.code		= BTN_5,
-		.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 8,
-		.active_low	= 0,
-	},
-};
-
-static void __init wzrhpg300nh2_setup(void)
-{
-
-	u8 *eeprom = (u8 *)   KSEG1ADDR(0x1f051000);
-	u8 *mac0   = eeprom + WZRHPG300NH2_MAC_OFFSET;
-	/* There is an eth1 but it is not connected to the switch */
-
-	ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
-	ath79_register_mdio(0, ~(BIT(0)));
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_register_eth(0);
-	ath79_register_usb();
-	/* gpio13 is usb power.  Turn it on. */
-	gpio_request(13, "usb");
-	gpio_direction_output(13, 1);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
-				 wzrhpg300nh2_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
-					wzrhpg300nh2_gpio_keys);
-	ap9x_pci_setup_wmac_led_pin(0, 5);
-	ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
-				ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
-
-	ap91_pci_init(eeprom, mac0);
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
-	     "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c
deleted file mode 100644
index f606145573..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-wzr-hp-g450h.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- *  Buffalo WZR-HP-G450G board support
- *
- *  Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPG450H_KEYS_POLL_INTERVAL     20      /* msecs */
-#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpg450h_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x0040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x0040000,
-		.size		= 0x0010000,
-	}, {
-		.name		= "ART",
-		.offset		= 0x0050000,
-		.size		= 0x0010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "uImage",
-		.offset		= 0x0060000,
-		.size		= 0x0100000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x0160000,
-		.size		= 0x1e80000,
-	}, {
-		.name		= "user_property",
-		.offset		= 0x1fe0000,
-		.size		= 0x0020000,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x0060000,
-		.size		= 0x1f80000,
-	}
-};
-
-static struct flash_platform_data wzrhpg450h_flash_data = {
-	.parts		= wzrhpg450h_partitions,
-	.nr_parts	= ARRAY_SIZE(wzrhpg450h_partitions),
-};
-
-static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
-	{
-		.name		= "buffalo:red:diag",
-		.gpio		= 14,
-		.active_low	= 1,
-	},
-	{
-		.name		= "buffalo:orange:security",
-		.gpio		= 13,
-		.active_low	= 1,
-	},
-};
-
-
-static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
-	{
-		.name		= "buffalo:blue:movie_engine",
-		.gpio		= 13,
-		.active_low	= 1,
-	},
-	{
-		.name		= "buffalo:green:router",
-		.gpio		= 14,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.desc		= "usb",
-		.type		= EV_KEY,
-		.code		= BTN_2,
-		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 1,
-		.active_low	= 1,
-	}, {
-		.desc		= "aoss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 8,
-		.active_low	= 1,
-	}, {
-		.desc		= "movie_engine",
-		.type		= EV_KEY,
-		.code		= BTN_6,
-		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 7,
-		.active_low	= 0,
-	}, {
-		.desc		= "router_off",
-		.type		= EV_KEY,
-		.code		= BTN_5,
-		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 12,
-		.active_low	= 0,
-	}
-};
-
-
-static void __init wzrhpg450h_init(void)
-{
-	u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
-	u8 *mac = (u8 *) ee + 2;
-
-	ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
-
-	ath79_register_mdio(0, ~BIT(0));
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
-				 wzrhpg450h_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(wzrhpg450h_gpio_keys),
-					wzrhpg450h_gpio_keys);
-
-	ath79_register_eth(0);
-
-	ath79_register_usb();
-	gpio_request(16, "usb");
-	gpio_direction_output(16, 1);
-
-	ap91_pci_init(ee, NULL);
-	ap9x_pci_setup_wmac_led_pin(0, 15);
-	ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
-				 ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
-	     wzrhpg450h_init);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c
deleted file mode 100644
index af6db6ad60..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-zcn-1523h.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *  Zcomax ZCN-1523H-2-8/5-16 board support
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "machtypes.h"
-
-#define ZCN_1523H_GPIO_BTN_RESET	0
-#define ZCN_1523H_GPIO_LED_INIT		11
-#define ZCN_1523H_GPIO_LED_LAN1		17
-
-#define ZCN_1523H_2_GPIO_LED_WEAK	13
-#define ZCN_1523H_2_GPIO_LED_MEDIUM	14
-#define ZCN_1523H_2_GPIO_LED_STRONG	15
-
-#define ZCN_1523H_5_GPIO_LED_UNKNOWN	1
-#define ZCN_1523H_5_GPIO_LED_LAN2	13
-#define ZCN_1523H_5_GPIO_LED_WEAK	14
-#define ZCN_1523H_5_GPIO_LED_MEDIUM	15
-#define ZCN_1523H_5_GPIO_LED_STRONG	16
-
-#define ZCN_1523H_KEYS_POLL_INTERVAL	20	/* msecs */
-#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition zcn_1523h_partitions[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= 0x040000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "u-boot-env",
-		.offset		= 0x040000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x050000,
-		.size		= 0x610000,
-	}, {
-		.name		= "kernel",
-		.offset		= 0x660000,
-		.size		= 0x170000,
-	}, {
-		.name		= "configure",
-		.offset		= 0x7d0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "mfg",
-		.offset		= 0x7e0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "eeprom",
-		.offset		= 0x7f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x050000,
-		.size		= 0x780000,
-	}
-};
-
-static struct flash_platform_data zcn_1523h_flash_data = {
-	.parts		= zcn_1523h_partitions,
-	.nr_parts	= ARRAY_SIZE(zcn_1523h_partitions),
-};
-
-static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= ZCN_1523H_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
-	{
-		.name		= "zcn-1523h:amber:init",
-		.gpio		= ZCN_1523H_GPIO_LED_INIT,
-		.active_low	= 1,
-	}, {
-		.name		= "zcn-1523h:green:lan1",
-		.gpio		= ZCN_1523H_GPIO_LED_LAN1,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
-	{
-		.name		= "zcn-1523h:red:weak",
-		.gpio		= ZCN_1523H_2_GPIO_LED_WEAK,
-		.active_low	= 1,
-	}, {
-		.name		= "zcn-1523h:amber:medium",
-		.gpio		= ZCN_1523H_2_GPIO_LED_MEDIUM,
-		.active_low	= 1,
-	}, {
-		.name		= "zcn-1523h:green:strong",
-		.gpio		= ZCN_1523H_2_GPIO_LED_STRONG,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
-	{
-		.name		= "zcn-1523h:red:weak",
-		.gpio		= ZCN_1523H_5_GPIO_LED_WEAK,
-		.active_low	= 1,
-	}, {
-		.name		= "zcn-1523h:amber:medium",
-		.gpio		= ZCN_1523H_5_GPIO_LED_MEDIUM,
-		.active_low	= 1,
-	}, {
-		.name		= "zcn-1523h:green:strong",
-		.gpio		= ZCN_1523H_5_GPIO_LED_STRONG,
-		.active_low	= 1,
-	}, {
-		.name		= "zcn-1523h:green:lan2",
-		.gpio		= ZCN_1523H_5_GPIO_LED_LAN2,
-		.active_low	= 1,
-	}, {
-		.name		= "zcn-1523h:amber:unknown",
-		.gpio		= ZCN_1523H_5_GPIO_LED_UNKNOWN,
-	}
-};
-
-static void __init zcn_1523h_generic_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
-	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-	ath79_register_m25p80(&zcn_1523h_flash_data);
-
-	ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
-					zcn_1523h_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(zcn_1523h_gpio_keys),
-					zcn_1523h_gpio_keys);
-
-	ap91_pci_init(ee, mac);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
-	ath79_register_mdio(0, 0x0);
-
-	/* LAN1 port */
-	ath79_register_eth(0);
-}
-
-static void __init zcn_1523h_2_setup(void)
-{
-	zcn_1523h_generic_setup();
-	ap9x_pci_setup_wmac_gpio(0, BIT(9), 0);
-
-	ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
-				 zcn_1523h_2_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
-	     zcn_1523h_2_setup);
-
-static void __init zcn_1523h_5_setup(void)
-{
-	zcn_1523h_generic_setup();
-	ap9x_pci_setup_wmac_gpio(0, BIT(8), 0);
-
-	ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
-				 zcn_1523h_5_leds_gpio);
-
-	/* LAN2 port */
-	ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
-	     zcn_1523h_5_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c
deleted file mode 100644
index 43911b8ac1..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *  Atheros AR71xx minimal nvram support
- *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include "nvram.h"
-
-char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
-{
-	unsigned len = strlen(name);
-	char *cur, *last;
-
-	if (buf_len == 0 || len == 0)
-		return NULL;
-
-	if (buf_len < len)
-		return NULL;
-
-	if (len == 1)
-		return memchr(buf, (int) *name, buf_len);
-
-	last = (char *) buf + buf_len - len;
-	for (cur = (char *) buf; cur <= last; cur++)
-		if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
-			return cur + len;
-
-	return NULL;
-}
-
-int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
-			       const char *name, char *mac)
-{
-	char *buf;
-	char *mac_str;
-	int ret;
-	int t;
-
-	buf = vmalloc(nvram_len);
-	if (!buf)
-		return -ENOMEM;
-
-	memcpy(buf, nvram, nvram_len);
-	buf[nvram_len - 1] = '\0';
-
-	mac_str = ath79_nvram_find_var(name, buf, nvram_len);
-	if (!mac_str) {
-		ret = -EINVAL;
-		goto free;
-	}
-
-	t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-		   &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
-
-	if (t != 6) {
-		ret = -EINVAL;
-		goto free;
-	}
-
-	ret = 0;
-
-free:
-	vfree(buf);
-	return ret;
-}
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h
deleted file mode 100644
index 75151d4a3c..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/nvram.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  Atheros AR71xx minimal nvram support
- *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _ATH79_NVRAM_H
-#define _ATH79_NVRAM_H
-
-char *ath79_nvram_find_var(const char *name, const char *buf,
-			   unsigned buf_len);
-int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
-			       const char *name, char *mac);
-
-#endif /* _ATH79_NVRAM_H */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c
deleted file mode 100644
index c395fb434f..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- *  Atheros AP94 reference board PCI initialization
- *
- *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-
-struct ath9k_fixup {
-	u16		*cal_data;
-	unsigned	slot;
-};
-
-static int ath9k_num_fixups;
-static struct ath9k_fixup ath9k_fixups[2];
-
-static void ath9k_pci_fixup(struct pci_dev *dev)
-{
-	void __iomem *mem;
-	u16 *cal_data = NULL;
-	u16 cmd;
-	u32 bar0;
-	u32 val;
-	unsigned i;
-
-	for (i = 0; i < ath9k_num_fixups; i++) {
-		if (ath9k_fixups[i].cal_data == NULL)
-			continue;
-
-		if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-			continue;
-
-		cal_data = ath9k_fixups[i].cal_data;
-		break;
-	}
-
-	if (cal_data == NULL)
-		return;
-
-	if (*cal_data != 0xa55a) {
-		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-		return;
-	}
-
-	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-
-	mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
-	if (!mem) {
-		pr_err("pci %s: ioremap error\n", pci_name(dev));
-		return;
-	}
-
-	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-
-	switch (ath79_soc) {
-	case ATH79_SOC_AR7161:
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
-				       AR71XX_PCI_MEM_BASE);
-		break;
-	case ATH79_SOC_AR7240:
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
-		break;
-
-	case ATH79_SOC_AR7241:
-	case ATH79_SOC_AR7242:
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
-		break;
-
-	default:
-		BUG();
-	}
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-	/* set pointer to first reg address */
-	cal_data += 3;
-	while (*cal_data != 0xffff) {
-		u32 reg;
-		reg = *cal_data++;
-		val = *cal_data++;
-		val |= (*cal_data++) << 16;
-
-		__raw_writel(val, mem + reg);
-		udelay(100);
-	}
-
-	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-	dev->vendor = val & 0xffff;
-	dev->device = (val >> 16) & 0xffff;
-
-	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-	dev->revision = val & 0xff;
-	dev->class = val >> 8; /* upper 3 bytes */
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-
-	iounmap(mem);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-
-void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data)
-{
-	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-		return;
-
-	ath9k_fixups[ath9k_num_fixups].slot = slot;
-	ath9k_fixups[ath9k_num_fixups].cal_data = cal_data;
-	ath9k_num_fixups++;
-}
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h b/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h
deleted file mode 100644
index 5794941f08..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/pci-ath9k-fixup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _PCI_ATH9K_FIXUP
-#define _PCI_ATH9K_FIXUP
-
-void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init;
-
-#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
deleted file mode 100644
index 43e67557ae..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  Atheros AR71xx SoC specific platform data definitions
- *
- *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ATH79_PLATFORM_H
-#define __ASM_MACH_ATH79_PLATFORM_H
-
-#include <linux/if_ether.h>
-#include <linux/skbuff.h>
-#include <linux/phy.h>
-#include <linux/spi/spi.h>
-
-struct ag71xx_switch_platform_data {
-	u8		phy4_mii_en:1;
-};
-
-struct ag71xx_platform_data {
-	phy_interface_t	phy_if_mode;
-	u32		phy_mask;
-	int		speed;
-	int		duplex;
-	u32		reset_bit;
-	u8		mac_addr[ETH_ALEN];
-	struct device	*mii_bus_dev;
-
-	u8		has_gbit:1;
-	u8		is_ar91xx:1;
-	u8		is_ar7240:1;
-	u8		is_ar724x:1;
-	u8		has_ar8216:1;
-
-	struct ag71xx_switch_platform_data *switch_data;
-
-	void		(*ddr_flush)(void);
-	void		(*set_speed)(int speed);
-
-	u32		fifo_cfg1;
-	u32		fifo_cfg2;
-	u32		fifo_cfg3;
-};
-
-struct ag71xx_mdio_platform_data {
-	u32		phy_mask;
-	int		is_ar7240;
-};
-
-#endif /* __ASM_MACH_ATH79_PLATFORM_H */
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h
deleted file mode 100644
index 3e6fc50c55..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/mach-rb750.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *  MikroTik RouterBOARD 750 definitions
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-#ifndef _MACH_RB750_H
-#define _MACH_RB750_H
-
-#include <linux/bitops.h>
-
-#define RB750_GPIO_LVC573_LE	0	/* Latch enable on LVC573 */
-#define RB750_GPIO_NAND_IO0	1	/* NAND I/O 0 */
-#define RB750_GPIO_NAND_IO1	2	/* NAND I/O 1 */
-#define RB750_GPIO_NAND_IO2	3	/* NAND I/O 2 */
-#define RB750_GPIO_NAND_IO3	4	/* NAND I/O 3 */
-#define RB750_GPIO_NAND_IO4	5	/* NAND I/O 4 */
-#define RB750_GPIO_NAND_IO5	6	/* NAND I/O 5 */
-#define RB750_GPIO_NAND_IO6	7	/* NAND I/O 6 */
-#define RB750_GPIO_NAND_IO7	8	/* NAND I/O 7 */
-#define RB750_GPIO_NAND_NCE	11	/* NAND Chip Enable (active low) */
-#define RB750_GPIO_NAND_RDY	12	/* NAND Ready */
-#define RB750_GPIO_NAND_CLE	14	/* NAND Command Latch Enable */
-#define RB750_GPIO_NAND_ALE	15	/* NAND Address Latch Enable */
-#define RB750_GPIO_NAND_NRE	16	/* NAND Read Enable (active low) */
-#define RB750_GPIO_NAND_NWE	17	/* NAND Write Enable (active low) */
-
-#define RB750_GPIO_BTN_RESET	1
-#define RB750_GPIO_SPI_CS0	2
-#define RB750_GPIO_LED_ACT	12
-#define RB750_GPIO_LED_PORT1	13
-#define RB750_GPIO_LED_PORT2	14
-#define RB750_GPIO_LED_PORT3	15
-#define RB750_GPIO_LED_PORT4	16
-#define RB750_GPIO_LED_PORT5	17
-
-#define RB750_LED_ACT		BIT(RB750_GPIO_LED_ACT)
-#define RB750_LED_PORT1		BIT(RB750_GPIO_LED_PORT1)
-#define RB750_LED_PORT2		BIT(RB750_GPIO_LED_PORT2)
-#define RB750_LED_PORT3		BIT(RB750_GPIO_LED_PORT3)
-#define RB750_LED_PORT4		BIT(RB750_GPIO_LED_PORT4)
-#define RB750_LED_PORT5		BIT(RB750_GPIO_LED_PORT5)
-
-#define RB750_LVC573_LE		BIT(RB750_GPIO_LVC573_LE)
-
-#define RB750_LED_BITS	(RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
-			 RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
-
-struct rb750_led_data {
-	char	*name;
-	char	*default_trigger;
-	u32	mask;
-	int	active_low;
-};
-
-struct rb750_led_platform_data {
-	int			num_leds;
-	struct rb750_led_data	*leds;
-};
-
-int rb750_latch_change(u32 mask_clr, u32 mask_set);
-void rb750_nand_pins_enable(void);
-void rb750_nand_pins_disable(void);
-
-#endif /* _MACH_RB750_H */
\ No newline at end of file
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
deleted file mode 100644
index 5b17e94b64..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on the patches for Linux 2.6.27.39 published by
- * MikroTik for their RouterBoard 4xx series devices.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define CPLD_GPIO_nLED1		0
-#define CPLD_GPIO_nLED2		1
-#define CPLD_GPIO_nLED3		2
-#define CPLD_GPIO_nLED4		3
-#define CPLD_GPIO_FAN		4
-#define CPLD_GPIO_ALE		5
-#define CPLD_GPIO_CLE		6
-#define CPLD_GPIO_nCE		7
-#define CPLD_GPIO_nLED5		8
-
-#define CPLD_NUM_GPIOS		9
-
-#define CPLD_CFG_nLED1		BIT(CPLD_GPIO_nLED1)
-#define CPLD_CFG_nLED2		BIT(CPLD_GPIO_nLED2)
-#define CPLD_CFG_nLED3		BIT(CPLD_GPIO_nLED3)
-#define CPLD_CFG_nLED4		BIT(CPLD_GPIO_nLED4)
-#define CPLD_CFG_FAN		BIT(CPLD_GPIO_FAN)
-#define CPLD_CFG_ALE		BIT(CPLD_GPIO_ALE)
-#define CPLD_CFG_CLE		BIT(CPLD_GPIO_CLE)
-#define CPLD_CFG_nCE		BIT(CPLD_GPIO_nCE)
-#define CPLD_CFG_nLED5		BIT(CPLD_GPIO_nLED5)
-
-struct rb4xx_cpld_platform_data {
-	unsigned	gpio_base;
-};
-
-extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
-extern int rb4xx_cpld_read(unsigned char *rx_buf,
-			   const unsigned char *verify_buf,
-			   unsigned cnt);
-extern int rb4xx_cpld_read_from(unsigned addr,
-				unsigned char *rx_buf,
-				const unsigned char *verify_buf,
-				unsigned cnt);
-extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);