diff options
| author | David Bauer <mail@david-bauer.net> | 2018-05-29 17:00:53 +0200 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-06-07 09:31:58 +0200 |
| commit | e36f8b3f3980903d5cefc51fe274c19c7a0719f2 (patch) | |
| tree | 9b3a86a9d695efc09b565dcf88f14dbe28da7253 /target/linux/ar71xx/base-files/etc/board.d/01_leds | |
| parent | a84962ea35e4e97f1c4a42f2eac0242cc2cbd879 (diff) | |
| download | upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.gz upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.tar.bz2 upstream-e36f8b3f3980903d5cefc51fe274c19c7a0719f2.zip | |
ar71xx: add support for OCEDO Koala
This commit adds support for the OCEDO Koala
SOC: Qualcomm QCA9558 (Scorpion)
RAM: 128MB
FLASH: 16MiB
WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3
WLAN2: QCA9880 5 GHz 802.11nac 3x3
INPUT: RESET button
LED: Power, LAN, WiFi 2.4, WiFi 5, SYS
Serial: Header Next to Black metal shield
Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet
- 2.4 GHz WiFi
- 5 GHz WiFi
- TFTP boot from ramdisk image
- Installation via ramdisk image
- OpenWRT sysupgrade
- Buttons
- LEDs
Installation seems to be possible only through booting an OpenWRT
ramdisk image.
Hold down the reset button while powering on the device. It will load a
ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8.
Note: depending on the present software, the device might also try to
pull a file called 'koala-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.
Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.
Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with
> fw_setenv bootcmd run bootcmd_1
Afterwards you can reboot the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/board.d/01_leds')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index f436854384..b53aafb0ee 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -423,6 +423,11 @@ hornet-ub-x2) ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt" ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1" ;; +koala) + ucidef_set_led_default "power" "POWER" "$board:green:power" "1" + ucidef_set_led_wlan "wlan2g" "WLAN 2.4GHz" "$board:yellow:wlan2" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN 5GHz" "$board:red:wlan58" "phy0tpt" + ;; lan-turtle) ucidef_set_led_netdev "wan" "WAN" "$board:orange:system" "eth1" ;; |