diff options
author | Christian Lamparter <chunkeey@gmail.com> | 2018-07-29 11:55:15 +0200 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-07-30 08:11:56 +0200 |
commit | aed4799d6d05d89dbca1bd5f14cc3d09ac563f3b (patch) | |
tree | e25dae8904f5ae669c619e623bc854666fe5e0de /target/linux/apm821xx/image/mbl_boot.scr | |
parent | 7516a960113d512cb2909f40bd07caf2a6c547b1 (diff) | |
download | upstream-aed4799d6d05d89dbca1bd5f14cc3d09ac563f3b.tar.gz upstream-aed4799d6d05d89dbca1bd5f14cc3d09ac563f3b.tar.bz2 upstream-aed4799d6d05d89dbca1bd5f14cc3d09ac563f3b.zip |
apm821xx: build squashfs-rootfs images for the MBL
This patch adds support for squashfs as the root filesystem.
advantages:
- migrate from a existing -ext4 installation and back
with the sysupgrade utility
- existing partition layout will not be lost during switch
- slightly smaller image size as compared to the -ext4 image.
disadvantages:
- needs f2fs + tools. This is because fstools rootdisk.c decides based
on the partition size (currently root partitions > 100 MiB) f2fs is
used as the rootfs_data filesystem.
- rootfs_data is placed into the rootfs partition after the squashfs.
This makes it difficult for tools that expect a /dev/sda${X} device.
It also makes it difficult for data recovery tools as they might not
expect to find a embedded partition or will be slightly confused.
... or will not support f2fs.
For people with existing build configurations: make sure to include mkf2fs
and f2fsck packages into the image. Otherwise the new -squashfs image will
only boot from the ram-overlay.
Note:
All overlay data (configurations/all installed packages/...) will be
placed in inside the rootfs partition (i.e. /dev/sda2) just after the
squashfs image.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/apm821xx/image/mbl_boot.scr')
-rw-r--r-- | target/linux/apm821xx/image/mbl_boot.scr | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/target/linux/apm821xx/image/mbl_boot.scr b/target/linux/apm821xx/image/mbl_boot.scr index 062dc2725a..955216983b 100644 --- a/target/linux/apm821xx/image/mbl_boot.scr +++ b/target/linux/apm821xx/image/mbl_boot.scr @@ -1,4 +1,4 @@ -setenv boot_args 'setenv bootargs root=/dev/sda2 rw rootfstype=ext4' +setenv boot_args 'setenv bootargs root=/dev/sda2 rw rootfstype=squashfs,ext4' setenv load_part1 'sata init; ext2load sata 1:1 ${kernel_addr_r} /boot/uImage; ext2load sata 1:1 ${fdt_addr_r} /boot/apollo3g.dtb' setenv load_part2 'sata init; ext2load sata 0:1 ${kernel_addr_r} /boot/uImage; ext2load sata 0:1 ${fdt_addr_r} /boot/apollo3g.dtb' setenv load_sata 'if run load_part1; then echo Loaded part 1; elif run load_part2; then echo Loaded part 2; fi' |