remove support for compat-wireless-old

SVN-Revision: 17327

4 files changed, 0 insertions, 486 deletions

diff --git a/package/mac80211/patches-old/001-disable_drivers.patch b/package/mac80211/patches-old/001-disable_drivers.patch
deleted file mode 100644
index 004c931526..0000000000
--- a/package/mac80211/patches-old/001-disable_drivers.patch
+++ /dev/null
@@ -1,159 +0,0 @@
---- a/config.mk
-+++ b/config.mk
-@@ -72,70 +72,34 @@ ifneq ($(CONFIG_PCI),)
- CONFIG_ATH5K=m
- CONFIG_ATH5K_DEBUG=n
- 
--# Required for older kernels which still use this flag.
--CONFIG_IWLWIFI=m
--
--CONFIG_IWLCORE=m
--CONFIG_IWL3945=m
--CONFIG_IWL4965=m
--CONFIG_IWL4965_HT=y
--CONFIG_B43=m
-+# CONFIG_B43=m
-+CONFIG_B43_NPHY=y
- # B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
- # Example, bcm4318:
- # http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
--CONFIG_B43_PCMCIA=y
-+# CONFIG_B43_PCMCIA=y
- CONFIG_B43_DMA=y
--CONFIG_B43_PIO=y
-+# CONFIG_B43_PIO=y
- # B43_PIO selects SSB_BLOCKIO
--CONFIG_SSB_BLOCKIO=y
--CONFIG_B43_DMA_AND_PIO_MODE=y
--CONFIG_B43_PCI_AUTOSELECT=y
--CONFIG_B43_PCICORE_AUTOSELECT=y
--#CONFIG_B43_RFKILL=n
--CONFIG_B43_LEDS=y
-+# CONFIG_SSB_BLOCKIO=y
-+# CONFIG_B43_DMA_AND_PIO_MODE=y
-+# CONFIG_B43_PCI_AUTOSELECT=y
-+# CONFIG_B43_PCICORE_AUTOSELECT=y
-+# CONFIG_B43_RFKILL=y
-+# CONFIG_B43_LEDS=y
- # CONFIG_B43_DEBUG is not set
- 
--CONFIG_B43LEGACY=m
--CONFIG_B43LEGACY_PCI_AUTOSELECT=y
--CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-+# CONFIG_B43LEGACY=m
-+# CONFIG_B43LEGACY_RFKILL=y
-+# CONFIG_B43LEGACY_LEDS=y
-+# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-+# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
- CONFIG_B43LEGACY_DMA=y
--CONFIG_B43LEGACY_PIO=y
--CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
--
--# The Intel ipws
--CONFIG_IPW2100=m
--CONFIG_IPW2100_MONITOR=y
--CONFIG_IPW2200=m
--CONFIG_IPW2200_MONITOR=y
--CONFIG_IPW2200_RADIOTAP=y
--CONFIG_IPW2200_PROMISCUOUS=y
--# The above enables use a second interface prefixed 'rtap'.
--#           Example usage:
--#
--# % modprobe ipw2200 rtap_iface=1
--# % ifconfig rtap0 up
--# % tethereal -i rtap0
--#
--# If you do not specify 'rtap_iface=1' as a module parameter then
--# the rtap interface will not be created and you will need to turn
--# it on via sysfs:
--#
--# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
--CONFIG_IPW2200_QOS=y
--
--NEED_IEEE80211=y
-+# CONFIG_B43LEGACY_PIO=y
-+# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
- 
- CONFIG_P54_PCI=m
- 
--CONFIG_SSB_PCIHOST_POSSIBLE=y
--CONFIG_SSB_PCIHOST=y
--CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
--CONFIG_SSB_DRIVER_PCICORE=y
--CONFIG_SSB_B43_PCI_BRIDGE=y
--
--CONFIG_RTL8180=m
--CONFIG_ADM8211=m
--
- CONFIG_RT2X00_LIB_PCI=m
- CONFIG_RT2400PCI=m
- CONFIG_RT2500PCI=m
-@@ -159,31 +123,7 @@ CONFIG_EEPROM_93CX6=m
- ifneq ($(CONFIG_USB),)
- CONFIG_ZD1211RW=m
- 
--# support for USB Wireless devices using Atmel at76c503,
--# at76c505 or at76c505a chips.
--CONFIG_USB_ATMEL=m
--
--# Stuff here things which depend on kernel versions for USB
--ifeq ($(shell test -e $(KLIB_BUILD)/Makefile && echo yes),yes)
--KERNEL_SUBLEVEL = $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
--ifeq ($(shell test $(KERNEL_SUBLEVEL) -gt 21 && echo yes),yes)
--
--# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
--
--# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC
--# All of these devices are based on Broadcom 4320 chip which
--# is only wireless RNDIS chip known to date.
--# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
--# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
--CONFIG_USB_NET_RNDIS_HOST=m
--CONFIG_USB_NET_RNDIS_WLAN=m
--CONFIG_USB_NET_CDCETHER=m
--
--endif
--endif
--
- CONFIG_P54_USB=m
--CONFIG_RTL8187=m
- 
- # RT2500USB does not require firmware
- CONFIG_RT2500USB=m
-@@ -212,36 +152,6 @@ endif
- # p54
- CONFIG_P54_COMMON=m
- 
--# Sonics Silicon Backplane
--CONFIG_SSB_POSSIBLE=y
--CONFIG_SSB=m
--CONFIG_SSB_SPROM=y
--
--ifneq ($(CONFIG_PCMCIA),)
--CONFIG_SSB_PCMCIAHOST=y
--endif
--
--# These two are for mips
--CONFIG_SSB_DRIVER_MIPS=n
--CONFIG_SSB_PCICORE_HOSTMODE=n
--# CONFIG_SSB_DEBUG is not set
--# CONFIG_SSB_DRIVER_EXTIF=y
--
--ifneq ($(CONFIG_USB),)
--CONFIG_LIBERTAS_USB=m
--NEED_LIBERTAS=y
--endif
--ifneq ($(CONFIG_PCMCIA),)
--CONFIG_LIBERTAS_CS=m
--NEED_LIBERTAS=y
--endif
--ifeq ($(NEED_LIBERTAS),y)
--CONFIG_LIBERTAS=m
--# Libertas uses the old stack but not fully, it will soon 
--# be cleaned.
--NEED_IEEE80211=y
--endif
--
- ifeq ($(NEED_IEEE80211),y)
- # Old ieee80211 "stack"
- # Note: old softmac is scheduled for removal so we
diff --git a/package/mac80211/patches-old/002-ssb-backport.patch b/package/mac80211/patches-old/002-ssb-backport.patch
deleted file mode 100644
index 85e30a19df..0000000000
--- a/package/mac80211/patches-old/002-ssb-backport.patch
+++ /dev/null
@@ -1,292 +0,0 @@
-This patch backports the interface of the b43 and b43legacy driver from 
-the new to the old ssb API. This patch is needed as long the old ssb
-version is used in the kernel for broadcom devices. After upgrading to
-ssb version out of kernel 2.6.27 or later this patch is not needed any more.
-
---- a/drivers/net/wireless/b43/dma.c
-+++ b/drivers/net/wireless/b43/dma.c
-@@ -328,11 +328,11 @@ static inline
- 	dma_addr_t dmaaddr;
- 
- 	if (tx) {
--		dmaaddr = ssb_dma_map_single(ring->dev->dev,
--					     buf, len, DMA_TO_DEVICE);
-+		dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
-+					 buf, len, DMA_TO_DEVICE);
- 	} else {
--		dmaaddr = ssb_dma_map_single(ring->dev->dev,
--					     buf, len, DMA_FROM_DEVICE);
-+		dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
-+					 buf, len, DMA_FROM_DEVICE);
- 	}
- 
- 	return dmaaddr;
-@@ -343,11 +343,11 @@ static inline
- 			  dma_addr_t addr, size_t len, int tx)
- {
- 	if (tx) {
--		ssb_dma_unmap_single(ring->dev->dev,
--				     addr, len, DMA_TO_DEVICE);
-+		dma_unmap_single(ring->dev->dev->dma_dev,
-+				 addr, len, DMA_TO_DEVICE);
- 	} else {
--		ssb_dma_unmap_single(ring->dev->dev,
--				     addr, len, DMA_FROM_DEVICE);
-+		dma_unmap_single(ring->dev->dev->dma_dev,
-+				 addr, len, DMA_FROM_DEVICE);
- 	}
- }
- 
-@@ -356,8 +356,8 @@ static inline
- 				 dma_addr_t addr, size_t len)
- {
- 	B43_WARN_ON(ring->tx);
--	ssb_dma_sync_single_for_cpu(ring->dev->dev,
--				    addr, len, DMA_FROM_DEVICE);
-+	dma_sync_single_for_cpu(ring->dev->dev->dma_dev,
-+				addr, len, DMA_FROM_DEVICE);
- }
- 
- static inline
-@@ -365,8 +365,8 @@ static inline
- 				    dma_addr_t addr, size_t len)
- {
- 	B43_WARN_ON(ring->tx);
--	ssb_dma_sync_single_for_device(ring->dev->dev,
--				       addr, len, DMA_FROM_DEVICE);
-+	dma_sync_single_for_device(ring->dev->dev->dma_dev,
-+				   addr, len, DMA_FROM_DEVICE);
- }
- 
- static inline
-@@ -381,6 +381,7 @@ static inline
- 
- static int alloc_ringmemory(struct b43_dmaring *ring)
- {
-+	struct device *dma_dev = ring->dev->dev->dma_dev;
- 	gfp_t flags = GFP_KERNEL;
- 
- 	/* The specs call for 4K buffers for 30- and 32-bit DMA with 4K
-@@ -391,14 +392,11 @@ static int alloc_ringmemory(struct b43_d
- 	 * For unknown reasons - possibly a hardware error - the BCM4311 rev
- 	 * 02, which uses 64-bit DMA, needs the ring buffer in very low memory,
- 	 * which accounts for the GFP_DMA flag below.
--	 *
--	 * The flags here must match the flags in free_ringmemory below!
- 	 */
- 	if (ring->type == B43_DMA_64BIT)
- 		flags |= GFP_DMA;
--	ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
--						  B43_DMA_RINGMEMSIZE,
--						  &(ring->dmabase), flags);
-+	ring->descbase = dma_alloc_coherent(dma_dev, B43_DMA_RINGMEMSIZE,
-+					    &(ring->dmabase), flags);
- 	if (!ring->descbase) {
- 		b43err(ring->dev->wl, "DMA ringmemory allocation failed\n");
- 		return -ENOMEM;
-@@ -410,13 +408,10 @@ static int alloc_ringmemory(struct b43_d
- 
- static void free_ringmemory(struct b43_dmaring *ring)
- {
--	gfp_t flags = GFP_KERNEL;
--
--	if (ring->type == B43_DMA_64BIT)
--		flags |= GFP_DMA;
-+	struct device *dma_dev = ring->dev->dev->dma_dev;
- 
--	ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE,
--				ring->descbase, ring->dmabase, flags);
-+	dma_free_coherent(dma_dev, B43_DMA_RINGMEMSIZE,
-+			  ring->descbase, ring->dmabase);
- }
- 
- /* Reset the RX DMA channel */
-@@ -523,7 +518,7 @@ static bool b43_dma_mapping_error(struct
- 				  dma_addr_t addr,
- 				  size_t buffersize, bool dma_to_device)
- {
--	if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
-+	if (unlikely(dma_mapping_error(addr)))
- 		return 1;
- 
- 	switch (ring->type) {
-@@ -849,10 +844,10 @@ struct b43_dmaring *b43_setup_dmaring(st
- 			goto err_kfree_meta;
- 
- 		/* test for ability to dma to txhdr_cache */
--		dma_test = ssb_dma_map_single(dev->dev,
--					      ring->txhdr_cache,
--					      b43_txhdr_size(dev),
--					      DMA_TO_DEVICE);
-+		dma_test = dma_map_single(dev->dev->dma_dev,
-+					  ring->txhdr_cache,
-+					  b43_txhdr_size(dev),
-+					  DMA_TO_DEVICE);
- 
- 		if (b43_dma_mapping_error(ring, dma_test,
- 					  b43_txhdr_size(dev), 1)) {
-@@ -864,10 +859,10 @@ struct b43_dmaring *b43_setup_dmaring(st
- 			if (!ring->txhdr_cache)
- 				goto err_kfree_meta;
- 
--			dma_test = ssb_dma_map_single(dev->dev,
--						      ring->txhdr_cache,
--						      b43_txhdr_size(dev),
--						      DMA_TO_DEVICE);
-+			dma_test = dma_map_single(dev->dev->dma_dev,
-+						  ring->txhdr_cache,
-+						  b43_txhdr_size(dev),
-+						  DMA_TO_DEVICE);
- 
- 			if (b43_dma_mapping_error(ring, dma_test,
- 						  b43_txhdr_size(dev), 1)) {
-@@ -878,9 +873,9 @@ struct b43_dmaring *b43_setup_dmaring(st
- 			}
- 		}
- 
--		ssb_dma_unmap_single(dev->dev,
--				     dma_test, b43_txhdr_size(dev),
--				     DMA_TO_DEVICE);
-+		dma_unmap_single(dev->dev->dma_dev,
-+				 dma_test, b43_txhdr_size(dev),
-+				 DMA_TO_DEVICE);
- 	}
- 
- 	err = alloc_ringmemory(ring);
---- a/drivers/net/wireless/b43legacy/dma.c
-+++ b/drivers/net/wireless/b43legacy/dma.c
-@@ -393,13 +393,13 @@ dma_addr_t map_descbuffer(struct b43lega
- 	dma_addr_t dmaaddr;
- 
- 	if (tx)
--		dmaaddr = ssb_dma_map_single(ring->dev->dev,
--					     buf, len,
--					     DMA_TO_DEVICE);
-+		dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
-+					 buf, len,
-+					 DMA_TO_DEVICE);
- 	else
--		dmaaddr = ssb_dma_map_single(ring->dev->dev,
--					     buf, len,
--					     DMA_FROM_DEVICE);
-+		dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
-+					 buf, len,
-+					 DMA_FROM_DEVICE);
- 
- 	return dmaaddr;
- }
-@@ -411,13 +411,13 @@ void unmap_descbuffer(struct b43legacy_d
- 		      int tx)
- {
- 	if (tx)
--		ssb_dma_unmap_single(ring->dev->dev,
--				     addr, len,
--				     DMA_TO_DEVICE);
-+		dma_unmap_single(ring->dev->dev->dma_dev,
-+				 addr, len,
-+				 DMA_TO_DEVICE);
- 	else
--		ssb_dma_unmap_single(ring->dev->dev,
--				     addr, len,
--				     DMA_FROM_DEVICE);
-+		dma_unmap_single(ring->dev->dev->dma_dev,
-+				 addr, len,
-+				 DMA_FROM_DEVICE);
- }
- 
- static inline
-@@ -427,8 +427,8 @@ void sync_descbuffer_for_cpu(struct b43l
- {
- 	B43legacy_WARN_ON(ring->tx);
- 
--	ssb_dma_sync_single_for_cpu(ring->dev->dev,
--				    addr, len, DMA_FROM_DEVICE);
-+	dma_sync_single_for_cpu(ring->dev->dev->dma_dev,
-+				addr, len, DMA_FROM_DEVICE);
- }
- 
- static inline
-@@ -438,8 +438,8 @@ void sync_descbuffer_for_device(struct b
- {
- 	B43legacy_WARN_ON(ring->tx);
- 
--	ssb_dma_sync_single_for_device(ring->dev->dev,
--				       addr, len, DMA_FROM_DEVICE);
-+	dma_sync_single_for_device(ring->dev->dev->dma_dev,
-+				   addr, len, DMA_FROM_DEVICE);
- }
- 
- static inline
-@@ -458,11 +458,10 @@ void free_descriptor_buffer(struct b43le
- 
- static int alloc_ringmemory(struct b43legacy_dmaring *ring)
- {
--	/* GFP flags must match the flags in free_ringmemory()! */
--	ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
--						  B43legacy_DMA_RINGMEMSIZE,
--						  &(ring->dmabase),
--						  GFP_KERNEL);
-+	struct device *dma_dev = ring->dev->dev->dma_dev;
-+
-+	ring->descbase = dma_alloc_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE,
-+					    &(ring->dmabase), GFP_KERNEL);
- 	if (!ring->descbase) {
- 		b43legacyerr(ring->dev->wl, "DMA ringmemory allocation"
- 			     " failed\n");
-@@ -475,8 +474,10 @@ static int alloc_ringmemory(struct b43le
- 
- static void free_ringmemory(struct b43legacy_dmaring *ring)
- {
--	ssb_dma_free_consistent(ring->dev->dev, B43legacy_DMA_RINGMEMSIZE,
--				ring->descbase, ring->dmabase, GFP_KERNEL);
-+	struct device *dma_dev = ring->dev->dev->dma_dev;
-+
-+	dma_free_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE,
-+			  ring->descbase, ring->dmabase);
- }
- 
- /* Reset the RX DMA channel */
-@@ -588,7 +589,7 @@ static bool b43legacy_dma_mapping_error(
- 					 size_t buffersize,
- 					 bool dma_to_device)
- {
--	if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
-+	if (unlikely(dma_mapping_error(addr)))
- 		return 1;
- 
- 	switch (ring->type) {
-@@ -905,9 +906,9 @@ struct b43legacy_dmaring *b43legacy_setu
- 			goto err_kfree_meta;
- 
- 		/* test for ability to dma to txhdr_cache */
--		dma_test = ssb_dma_map_single(dev->dev, ring->txhdr_cache,
--					      sizeof(struct b43legacy_txhdr_fw3),
--					      DMA_TO_DEVICE);
-+		dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache,
-+					  sizeof(struct b43legacy_txhdr_fw3),
-+					  DMA_TO_DEVICE);
- 
- 		if (b43legacy_dma_mapping_error(ring, dma_test,
- 					sizeof(struct b43legacy_txhdr_fw3), 1)) {
-@@ -919,7 +920,7 @@ struct b43legacy_dmaring *b43legacy_setu
- 			if (!ring->txhdr_cache)
- 				goto err_kfree_meta;
- 
--				dma_test = ssb_dma_map_single(dev->dev,
-+			dma_test = dma_map_single(dev->dev->dma_dev,
- 					ring->txhdr_cache,
- 					sizeof(struct b43legacy_txhdr_fw3),
- 					DMA_TO_DEVICE);
-@@ -929,9 +930,9 @@ struct b43legacy_dmaring *b43legacy_setu
- 				goto err_kfree_txhdr_cache;
- 		}
- 
--		ssb_dma_unmap_single(dev->dev, dma_test,
--				     sizeof(struct b43legacy_txhdr_fw3),
--				     DMA_TO_DEVICE);
-+		dma_unmap_single(dev->dev->dma_dev,
-+				 dma_test, sizeof(struct b43legacy_txhdr_fw3),
-+				 DMA_TO_DEVICE);
- 	}
- 
- 	ring->nr_slots = nr_slots;
diff --git a/package/mac80211/patches-old/004-allow-ap-vlan-modes.patch b/package/mac80211/patches-old/004-allow-ap-vlan-modes.patch
deleted file mode 100644
index 715dd5e519..0000000000
--- a/package/mac80211/patches-old/004-allow-ap-vlan-modes.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-Subject: mac80211: allow AP and VLAN modes
-
-This patch allows switching interfaces into AP/VLAN modes using
-cfg80211 (nl80211). Don't allow doing it with wext because then
-people will just attempt to do it manually (without hostapd) and
-complain that it doesn't work.
-
-Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
----
- net/mac80211/cfg.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -35,6 +35,10 @@ nl80211_type_to_mac80211_type(enum nl802
- 	case NL80211_IFTYPE_MESH_POINT:
- 		return IEEE80211_IF_TYPE_MESH_POINT;
- #endif
-+	case NL80211_IFTYPE_AP:
-+		return IEEE80211_IF_TYPE_AP;
-+	case NL80211_IFTYPE_AP_VLAN:
-+		return IEEE80211_IF_TYPE_VLAN;
- 	case NL80211_IFTYPE_WDS:
- 		return IEEE80211_IF_TYPE_WDS;
- 	default:
diff --git a/package/mac80211/patches-old/005-disable_ssb_build.patch b/package/mac80211/patches-old/005-disable_ssb_build.patch
deleted file mode 100644
index c80c745975..0000000000
--- a/package/mac80211/patches-old/005-disable_ssb_build.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/Makefile
-+++ b/Makefile
-@@ -19,7 +19,6 @@ NOSTDINC_FLAGS := -I$(M)/include/ -inclu
- obj-y := net/wireless/ net/mac80211/
- ifeq ($(ONLY_CORE),)
- obj-y += net/ieee80211/ \
--	drivers/ssb/ \
- 	drivers/misc/ \
- 	drivers/net/usb/ \
- 	drivers/net/wireless/