apm821xx: remove 4.4 kernel support

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

23 files changed, 0 insertions, 7119 deletions

diff --git a/target/linux/apm821xx/config-4.4 b/target/linux/apm821xx/config-4.4
deleted file mode 100644
index 68e22ecf8d..0000000000
--- a/target/linux/apm821xx/config-4.4
+++ /dev/null
@@ -1,331 +0,0 @@
-# CONFIG_40x is not set
-CONFIG_44x=y
-CONFIG_4xx=y
-CONFIG_4xx_SOC=y
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_APM821xx=y
-# CONFIG_APOLLO3G is not set
-# CONFIG_ARCHES is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-# CONFIG_ARCH_RANDOM is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_BAMBOO is not set
-CONFIG_BCH=y
-# CONFIG_BLUESTONE is not set
-CONFIG_BUCKMINSTER=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-CONFIG_BOUNCE=y
-# CONFIG_CANYONLANDS is not set
-# CONFIG_IKAREM is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_PPC4XX=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MD5_PPC=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1_PPC=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DECOMPRESS_GZIP=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EBONY is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EIGER is not set
-# CONFIG_EPAPR_BOOT is not set
-CONFIG_EXTRA_TARGETS="uImage"
-CONFIG_FREEZER=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_GENERIC_CSUM is not set
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_GE_FPGA is not set
-# CONFIG_GLACIER is not set
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_GENERIC_RCU_GUP=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_PPC4XX=y
-CONFIG_HZ=1000
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IBM_IIC=y
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_EMAC4=y
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
-CONFIG_IBM_EMAC_TAH=y
-CONFIG_IBM_EMAC_TXB=128
-# CONFIG_ICON is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_IPIC is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_KATMAI is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_LIBFDT=y
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_U3_HT_IRQS is not set
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_NDFC=y
-# CONFIG_MTD_SPLIT is not set
-# CONFIG_MTD_SPLIT_FIRMWARE_NAME is not set
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-# CONFIG_MTD_SPLIT_SUPPORT is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UBI_BEB_LIMIT is not set
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_MTD_UBI_WL_THRESHOLD is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NONSTATIC_KERNEL is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_BUS_ADDR_T_64BIT=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYS_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PM=y
-CONFIG_PM_AUTOSLEEP=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_WAKELOCKS=y
-CONFIG_PM_WAKELOCKS_GC=y
-CONFIG_PM_WAKELOCKS_LIMIT=100
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC44x_SIMPLE is not set
-CONFIG_PPC4xx_CPM=y
-CONFIG_PPC4xx_GPIO=y
-# CONFIG_PPC4xx_HSTA_MSI is not set
-# CONFIG_PPC4xx_MSI is not set
-CONFIG_PPC4xx_OCM=y
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_47x is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
-CONFIG_PPC_ADV_DEBUG_DVCS=2
-CONFIG_PPC_ADV_DEBUG_IACS=4
-CONFIG_PPC_ADV_DEBUG_REGS=y
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_COPRO_BASE is not set
-CONFIG_PPC_DCR=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DOORBELL is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EPAPR_HV_PIC is not set
-CONFIG_PPC_FPU=y
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_ICP_HV is not set
-# CONFIG_PPC_ICP_NATIVE is not set
-# CONFIG_PPC_ICS_RTAS is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_LIB_RHEAP=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_MSI_BITMAP is not set
-# CONFIG_PPC_P7_NAP is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-# CONFIG_PPC_XICS is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_PTE_64BIT=y
-# CONFIG_RAINIER is not set
-CONFIG_RAS=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RD_GZIP=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SAM440EP is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SEQUOIA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SIMPLE_GPIO=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-# CONFIG_STRICT_MM_TYPECHECKS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_SWIOTLB is not set
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TAISHAN is not set
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_TICK_CPU_ACCOUNTING=y
-# CONFIG_UBIFS_FS is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-# CONFIG_UBIFS_FS_LZO is not set
-# CONFIG_UBIFS_FS_ZLIB is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_WARP is not set
-# CONFIG_WNDR4700 is not set
-CONFIG_WORD_SIZE=32
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-# CONFIG_YOSEMITE is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_SENSORS_TC654 is not set
diff --git a/target/linux/apm821xx/patches-4.4/001-crypto4xx-integrate-ppc4xx-rng-into-crypto4xx.patch b/target/linux/apm821xx/patches-4.4/001-crypto4xx-integrate-ppc4xx-rng-into-crypto4xx.patch
deleted file mode 100644
index 324c695d05..0000000000
--- a/target/linux/apm821xx/patches-4.4/001-crypto4xx-integrate-ppc4xx-rng-into-crypto4xx.patch
+++ /dev/null
@@ -1,481 +0,0 @@
-From 5343e674f32fb82b7a80a24b5a84eee62d3fe624 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Mon, 18 Apr 2016 12:57:41 +0200
-Subject: [PATCH] crypto4xx: integrate ppc4xx-rng into crypto4xx
-
-This patch integrates the ppc4xx-rng driver into the existing
-crypto4xx. This is because the true random number generator
-is controlled and part of the security core.
-
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/char/hw_random/Kconfig          |  13 ---
- drivers/char/hw_random/Makefile         |   1 -
- drivers/char/hw_random/ppc4xx-rng.c     | 147 --------------------------------
- drivers/crypto/Kconfig                  |   8 ++
- drivers/crypto/amcc/Makefile            |   1 +
- drivers/crypto/amcc/crypto4xx_core.c    |   7 +-
- drivers/crypto/amcc/crypto4xx_core.h    |   4 +
- drivers/crypto/amcc/crypto4xx_reg_def.h |   1 +
- drivers/crypto/amcc/crypto4xx_trng.c    | 131 ++++++++++++++++++++++++++++
- drivers/crypto/amcc/crypto4xx_trng.h    |  34 ++++++++
- 10 files changed, 184 insertions(+), 163 deletions(-)
- delete mode 100644 drivers/char/hw_random/ppc4xx-rng.c
- create mode 100644 drivers/crypto/amcc/crypto4xx_trng.c
- create mode 100644 drivers/crypto/amcc/crypto4xx_trng.h
-
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -268,19 +268,6 @@ config HW_RANDOM_NOMADIK
- 
- 	  If unsure, say Y.
- 
--config HW_RANDOM_PPC4XX
--	tristate "PowerPC 4xx generic true random number generator support"
--	depends on PPC && 4xx
--	default HW_RANDOM
--	---help---
--	 This driver provides the kernel-side support for the TRNG hardware
--	 found in the security function of some PowerPC 4xx SoCs.
--
--	 To compile this driver as a module, choose M here: the
--	 module will be called ppc4xx-rng.
--
--	 If unsure, say N.
--
- config HW_RANDOM_PSERIES
- 	tristate "pSeries HW Random Number Generator support"
- 	depends on PPC64 && IBMVIO
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -22,7 +22,6 @@ obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939
- obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
- obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
- obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
--obj-$(CONFIG_HW_RANDOM_PPC4XX) += ppc4xx-rng.o
- obj-$(CONFIG_HW_RANDOM_PSERIES) += pseries-rng.o
- obj-$(CONFIG_HW_RANDOM_POWERNV) += powernv-rng.o
- obj-$(CONFIG_HW_RANDOM_EXYNOS)	+= exynos-rng.o
---- a/drivers/char/hw_random/ppc4xx-rng.c
-+++ /dev/null
-@@ -1,147 +0,0 @@
--/*
-- * Generic PowerPC 44x RNG driver
-- *
-- * Copyright 2011 IBM Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License as published by the
-- * Free Software Foundation; version 2 of the License.
-- */
--
--#include <linux/module.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--#include <linux/hw_random.h>
--#include <linux/delay.h>
--#include <linux/of_address.h>
--#include <linux/of_platform.h>
--#include <asm/io.h>
--
--#define PPC4XX_TRNG_DEV_CTRL 0x60080
--
--#define PPC4XX_TRNGE 0x00020000
--#define PPC4XX_TRNG_CTRL 0x0008
--#define PPC4XX_TRNG_CTRL_DALM 0x20
--#define PPC4XX_TRNG_STAT 0x0004
--#define PPC4XX_TRNG_STAT_B 0x1
--#define PPC4XX_TRNG_DATA 0x0000
--
--#define MODULE_NAME "ppc4xx_rng"
--
--static int ppc4xx_rng_data_present(struct hwrng *rng, int wait)
--{
--	void __iomem *rng_regs = (void __iomem *) rng->priv;
--	int busy, i, present = 0;
--
--	for (i = 0; i < 20; i++) {
--		busy = (in_le32(rng_regs + PPC4XX_TRNG_STAT) & PPC4XX_TRNG_STAT_B);
--		if (!busy || !wait) {
--			present = 1;
--			break;
--		}
--		udelay(10);
--	}
--	return present;
--}
--
--static int ppc4xx_rng_data_read(struct hwrng *rng, u32 *data)
--{
--	void __iomem *rng_regs = (void __iomem *) rng->priv;
--	*data = in_le32(rng_regs + PPC4XX_TRNG_DATA);
--	return 4;
--}
--
--static int ppc4xx_rng_enable(int enable)
--{
--	struct device_node *ctrl;
--	void __iomem *ctrl_reg;
--	int err = 0;
--	u32 val;
--
--	/* Find the main crypto device node and map it to turn the TRNG on */
--	ctrl = of_find_compatible_node(NULL, NULL, "amcc,ppc4xx-crypto");
--	if (!ctrl)
--		return -ENODEV;
--
--	ctrl_reg = of_iomap(ctrl, 0);
--	if (!ctrl_reg) {
--		err = -ENODEV;
--		goto out;
--	}
--
--	val = in_le32(ctrl_reg + PPC4XX_TRNG_DEV_CTRL);
--
--	if (enable)
--		val |= PPC4XX_TRNGE;
--	else
--		val = val & ~PPC4XX_TRNGE;
--
--	out_le32(ctrl_reg + PPC4XX_TRNG_DEV_CTRL, val);
--	iounmap(ctrl_reg);
--
--out:
--	of_node_put(ctrl);
--
--	return err;
--}
--
--static struct hwrng ppc4xx_rng = {
--	.name = MODULE_NAME,
--	.data_present = ppc4xx_rng_data_present,
--	.data_read = ppc4xx_rng_data_read,
--};
--
--static int ppc4xx_rng_probe(struct platform_device *dev)
--{
--	void __iomem *rng_regs;
--	int err = 0;
--
--	rng_regs = of_iomap(dev->dev.of_node, 0);
--	if (!rng_regs)
--		return -ENODEV;
--
--	err = ppc4xx_rng_enable(1);
--	if (err)
--		return err;
--
--	out_le32(rng_regs + PPC4XX_TRNG_CTRL, PPC4XX_TRNG_CTRL_DALM);
--	ppc4xx_rng.priv = (unsigned long) rng_regs;
--
--	err = hwrng_register(&ppc4xx_rng);
--
--	return err;
--}
--
--static int ppc4xx_rng_remove(struct platform_device *dev)
--{
--	void __iomem *rng_regs = (void __iomem *) ppc4xx_rng.priv;
--
--	hwrng_unregister(&ppc4xx_rng);
--	ppc4xx_rng_enable(0);
--	iounmap(rng_regs);
--
--	return 0;
--}
--
--static const struct of_device_id ppc4xx_rng_match[] = {
--	{ .compatible = "ppc4xx-rng", },
--	{ .compatible = "amcc,ppc460ex-rng", },
--	{ .compatible = "amcc,ppc440epx-rng", },
--	{},
--};
--MODULE_DEVICE_TABLE(of, ppc4xx_rng_match);
--
--static struct platform_driver ppc4xx_rng_driver = {
--	.driver = {
--		.name = MODULE_NAME,
--		.of_match_table = ppc4xx_rng_match,
--	},
--	.probe = ppc4xx_rng_probe,
--	.remove = ppc4xx_rng_remove,
--};
--
--module_platform_driver(ppc4xx_rng_driver);
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Josh Boyer <jwboyer@linux.vnet.ibm.com>");
--MODULE_DESCRIPTION("HW RNG driver for PPC 4xx processors");
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -277,6 +277,14 @@ config CRYPTO_DEV_PPC4XX
- 	help
- 	  This option allows you to have support for AMCC crypto acceleration.
- 
-+config HW_RANDOM_PPC4XX
-+	bool "PowerPC 4xx generic true random number generator support"
-+	depends on CRYPTO_DEV_PPC4XX && HW_RANDOM
-+	default y
-+	---help---
-+	 This option provides the kernel-side support for the TRNG hardware
-+	 found in the security function of some PowerPC 4xx SoCs.
-+
- config CRYPTO_DEV_OMAP_SHAM
- 	tristate "Support for OMAP MD5/SHA1/SHA2 hw accelerator"
- 	depends on ARCH_OMAP2PLUS
---- a/drivers/crypto/amcc/Makefile
-+++ b/drivers/crypto/amcc/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += crypto4xx.o
- crypto4xx-y :=  crypto4xx_core.o crypto4xx_alg.o crypto4xx_sa.o
-+crypto4xx-$(CONFIG_HW_RANDOM_PPC4XX) += crypto4xx_trng.o
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -40,6 +40,7 @@
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_core.h"
- #include "crypto4xx_sa.h"
-+#include "crypto4xx_trng.h"
- 
- #define PPC4XX_SEC_VERSION_STR			"0.5"
- 
-@@ -1221,6 +1222,7 @@ static int crypto4xx_probe(struct platfo
- 	if (rc)
- 		goto err_start_dev;
- 
-+	ppc4xx_trng_probe(core_dev);
- 	return 0;
- 
- err_start_dev:
-@@ -1248,6 +1250,8 @@ static int crypto4xx_remove(struct platf
- 	struct device *dev = &ofdev->dev;
- 	struct crypto4xx_core_device *core_dev = dev_get_drvdata(dev);
- 
-+	ppc4xx_trng_remove(core_dev);
-+
- 	free_irq(core_dev->irq, dev);
- 	irq_dispose_mapping(core_dev->irq);
- 
-@@ -1268,7 +1272,7 @@ MODULE_DEVICE_TABLE(of, crypto4xx_match)
- 
- static struct platform_driver crypto4xx_driver = {
- 	.driver = {
--		.name = "crypto4xx",
-+		.name = MODULE_NAME,
- 		.of_match_table = crypto4xx_match,
- 	},
- 	.probe		= crypto4xx_probe,
-@@ -1280,4 +1284,3 @@ module_platform_driver(crypto4xx_driver)
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("James Hsiao <jhsiao@amcc.com>");
- MODULE_DESCRIPTION("Driver for AMCC PPC4xx crypto accelerator");
--
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -24,6 +24,8 @@
- 
- #include <crypto/internal/hash.h>
- 
-+#define MODULE_NAME "crypto4xx"
-+
- #define PPC460SX_SDR0_SRST                      0x201
- #define PPC405EX_SDR0_SRST                      0x200
- #define PPC460EX_SDR0_SRST                      0x201
-@@ -72,6 +74,7 @@ struct crypto4xx_device {
- 	char *name;
- 	u64  ce_phy_address;
- 	void __iomem *ce_base;
-+	void __iomem *trng_base;
- 
- 	void *pdr;			/* base address of packet
- 					descriptor ring */
-@@ -106,6 +109,7 @@ struct crypto4xx_core_device {
- 	struct device *device;
- 	struct platform_device *ofdev;
- 	struct crypto4xx_device *dev;
-+	struct hwrng *trng;
- 	u32 int_status;
- 	u32 irq;
- 	struct tasklet_struct tasklet;
---- a/drivers/crypto/amcc/crypto4xx_reg_def.h
-+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
-@@ -125,6 +125,7 @@
- #define PPC4XX_INTERRUPT_CLR			0x3ffff
- #define PPC4XX_PRNG_CTRL_AUTO_EN		0x3
- #define PPC4XX_DC_3DES_EN			1
-+#define PPC4XX_TRNG_EN				0x00020000
- #define PPC4XX_INT_DESCR_CNT			4
- #define PPC4XX_INT_TIMEOUT_CNT			0
- #define PPC4XX_INT_CFG				1
---- /dev/null
-+++ b/drivers/crypto/amcc/crypto4xx_trng.c
-@@ -0,0 +1,131 @@
-+/*
-+ * Generic PowerPC 44x RNG driver
-+ *
-+ * Copyright 2011 IBM Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; version 2 of the License.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/hw_random.h>
-+#include <linux/delay.h>
-+#include <linux/of_address.h>
-+#include <linux/of_platform.h>
-+#include <linux/io.h>
-+
-+#include "crypto4xx_core.h"
-+#include "crypto4xx_trng.h"
-+#include "crypto4xx_reg_def.h"
-+
-+#define PPC4XX_TRNG_CTRL	0x0008
-+#define PPC4XX_TRNG_CTRL_DALM	0x20
-+#define PPC4XX_TRNG_STAT	0x0004
-+#define PPC4XX_TRNG_STAT_B	0x1
-+#define PPC4XX_TRNG_DATA	0x0000
-+
-+static int ppc4xx_trng_data_present(struct hwrng *rng, int wait)
-+{
-+	struct crypto4xx_device *dev = (void *)rng->priv;
-+	int busy, i, present = 0;
-+
-+	for (i = 0; i < 20; i++) {
-+		busy = (in_le32(dev->trng_base + PPC4XX_TRNG_STAT) &
-+			PPC4XX_TRNG_STAT_B);
-+		if (!busy || !wait) {
-+			present = 1;
-+			break;
-+		}
-+		udelay(10);
-+	}
-+	return present;
-+}
-+
-+static int ppc4xx_trng_data_read(struct hwrng *rng, u32 *data)
-+{
-+	struct crypto4xx_device *dev = (void *)rng->priv;
-+	*data = in_le32(dev->trng_base + PPC4XX_TRNG_DATA);
-+	return 4;
-+}
-+
-+static void ppc4xx_trng_enable(struct crypto4xx_device *dev, bool enable)
-+{
-+	u32 device_ctrl;
-+
-+	device_ctrl = readl(dev->ce_base + CRYPTO4XX_DEVICE_CTRL);
-+	if (enable)
-+		device_ctrl |= PPC4XX_TRNG_EN;
-+	else
-+		device_ctrl &= ~PPC4XX_TRNG_EN;
-+	writel(device_ctrl, dev->ce_base + CRYPTO4XX_DEVICE_CTRL);
-+}
-+
-+static const struct of_device_id ppc4xx_trng_match[] = {
-+	{ .compatible = "ppc4xx-rng", },
-+	{ .compatible = "amcc,ppc460ex-rng", },
-+	{ .compatible = "amcc,ppc440epx-rng", },
-+	{},
-+};
-+
-+void ppc4xx_trng_probe(struct crypto4xx_core_device *core_dev)
-+{
-+	struct crypto4xx_device *dev = core_dev->dev;
-+	struct device_node *trng = NULL;
-+	struct hwrng *rng = NULL;
-+	int err;
-+
-+	/* Find the TRNG device node and map it */
-+	trng = of_find_matching_node(NULL, ppc4xx_trng_match);
-+	if (!trng || !of_device_is_available(trng))
-+		return;
-+
-+	dev->trng_base = of_iomap(trng, 0);
-+	of_node_put(trng);
-+	if (!dev->trng_base)
-+		goto err_out;
-+
-+	rng = kzalloc(sizeof(*rng), GFP_KERNEL);
-+	if (!rng)
-+		goto err_out;
-+
-+	rng->name = MODULE_NAME;
-+	rng->data_present = ppc4xx_trng_data_present;
-+	rng->data_read = ppc4xx_trng_data_read;
-+	rng->priv = (unsigned long) dev;
-+	core_dev->trng = rng;
-+	ppc4xx_trng_enable(dev, true);
-+	out_le32(dev->trng_base + PPC4XX_TRNG_CTRL, PPC4XX_TRNG_CTRL_DALM);
-+	err = devm_hwrng_register(core_dev->device, core_dev->trng);
-+	if (err) {
-+		ppc4xx_trng_enable(dev, false);
-+		dev_err(core_dev->device, "failed to register hwrng (%d).\n",
-+			err);
-+		goto err_out;
-+	}
-+	return;
-+
-+err_out:
-+	of_node_put(trng);
-+	iounmap(dev->trng_base);
-+	kfree(rng);
-+	dev->trng_base = NULL;
-+	core_dev->trng = NULL;
-+}
-+
-+void ppc4xx_trng_remove(struct crypto4xx_core_device *core_dev)
-+{
-+	if (core_dev && core_dev->trng) {
-+		struct crypto4xx_device *dev = core_dev->dev;
-+
-+		devm_hwrng_unregister(core_dev->device, core_dev->trng);
-+		ppc4xx_trng_enable(dev, false);
-+		iounmap(dev->trng_base);
-+		kfree(core_dev->trng);
-+	}
-+}
-+
-+MODULE_ALIAS("ppc4xx_rng");
---- /dev/null
-+++ b/drivers/crypto/amcc/crypto4xx_trng.h
-@@ -0,0 +1,34 @@
-+/**
-+ * AMCC SoC PPC4xx Crypto Driver
-+ *
-+ * Copyright (c) 2008 Applied Micro Circuits Corporation.
-+ * All rights reserved. James Hsiao <jhsiao@amcc.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * This file defines the security context
-+ * associate format.
-+ */
-+
-+#ifndef __CRYPTO4XX_TRNG_H__
-+#define __CRYPTO4XX_TRNG_H__
-+
-+#ifdef CONFIG_HW_RANDOM_PPC4XX
-+void ppc4xx_trng_probe(struct crypto4xx_core_device *core_dev);
-+void ppc4xx_trng_remove(struct crypto4xx_core_device *core_dev);
-+#else
-+static inline void ppc4xx_trng_probe(
-+	struct crypto4xx_device *dev __maybe_unused) { }
-+static inline void ppc4xx_trng_remove(
-+	struct crypto4xx_device *dev __maybe_unused) { }
-+#endif
-+
-+#endif
diff --git a/target/linux/apm821xx/patches-4.4/002-powerpc_ibm_phy_add_ar8035.patch b/target/linux/apm821xx/patches-4.4/002-powerpc_ibm_phy_add_ar8035.patch
deleted file mode 100644
index f885167e04..0000000000
--- a/target/linux/apm821xx/patches-4.4/002-powerpc_ibm_phy_add_ar8035.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 0c13957a43a90b1522eb616f3c9967ec44e4da1d Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Tue, 3 May 2016 13:58:24 +0200
-Subject: [PATCH] drivers: net: emac: add Atheros AR8035 phy initialization
- code
-To: netdev@vger.kernel.org
-
-This patch adds the phy initialization code for Qualcomm
-Atheros AR8035 phy. This configuration is found in the
-Cisco Meraki MR24.
-
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
----
- drivers/net/ethernet/ibm/emac/phy.c | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/drivers/net/ethernet/ibm/emac/phy.c
-+++ b/drivers/net/ethernet/ibm/emac/phy.c
-@@ -470,12 +470,38 @@ static struct mii_phy_def m88e1112_phy_d
- 	.ops		= &m88e1112_phy_ops,
- };
- 
-+static int ar8035_init(struct mii_phy *phy)
-+{
-+	phy_write(phy, 0x1d, 0x5); /* Address debug register 5 */
-+	phy_write(phy, 0x1e, 0x2d47); /* Value copied from u-boot */
-+	phy_write(phy, 0x1d, 0xb);    /* Address hib ctrl */
-+	phy_write(phy, 0x1e, 0xbc20); /* Value copied from u-boot */
-+
-+	return 0;
-+}
-+
-+static struct mii_phy_ops ar8035_phy_ops = {
-+	.init		= ar8035_init,
-+	.setup_aneg	= genmii_setup_aneg,
-+	.setup_forced	= genmii_setup_forced,
-+	.poll_link	= genmii_poll_link,
-+	.read_link	= genmii_read_link,
-+};
-+
-+static struct mii_phy_def ar8035_phy_def = {
-+	.phy_id		= 0x004dd070,
-+	.phy_id_mask	= 0xfffffff0,
-+	.name		= "Atheros 8035 Gigabit Ethernet",
-+	.ops		= &ar8035_phy_ops,
-+};
-+
- static struct mii_phy_def *mii_phy_table[] = {
- 	&et1011c_phy_def,
- 	&cis8201_phy_def,
- 	&bcm5248_phy_def,
- 	&m88e1111_phy_def,
- 	&m88e1112_phy_def,
-+	&ar8035_phy_def,
- 	&genmii_phy_def,
- 	NULL
- };
diff --git a/target/linux/apm821xx/patches-4.4/010-dmaengine-Add-transfer-termination-synchronization-s.patch b/target/linux/apm821xx/patches-4.4/010-dmaengine-Add-transfer-termination-synchronization-s.patch
deleted file mode 100644
index 89bdd49d2b..0000000000
--- a/target/linux/apm821xx/patches-4.4/010-dmaengine-Add-transfer-termination-synchronization-s.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From 7bd903c5ca47fde5ad52370a47776491813c772e Mon Sep 17 00:00:00 2001
-From: Peter Ujfalusi <peter.ujfalusi@ti.com>
-Date: Mon, 14 Dec 2015 22:47:39 +0200
-Subject: [PATCH 1/3] dmaengine: core: Move and merge the code paths using
- private_candidate
-
-Channel matching with private_candidate() is used in two paths, the error
-checking is slightly different in them and they are duplicating code also.
-Move the code under find_candidate() to provide consistent execution and
-going to allow us to reuse this mode of channel lookup later.
-
-Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Reviewed-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Vinod Koul <vinod.koul@intel.com>
----
- drivers/dma/dmaengine.c | 81 +++++++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 39 deletions(-)
-
---- a/drivers/dma/dmaengine.c
-+++ b/drivers/dma/dmaengine.c
-@@ -542,6 +542,42 @@ static struct dma_chan *private_candidat
- 	return NULL;
- }
- 
-+static struct dma_chan *find_candidate(struct dma_device *device,
-+				       const dma_cap_mask_t *mask,
-+				       dma_filter_fn fn, void *fn_param)
-+{
-+	struct dma_chan *chan = private_candidate(mask, device, fn, fn_param);
-+	int err;
-+
-+	if (chan) {
-+		/* Found a suitable channel, try to grab, prep, and return it.
-+		 * We first set DMA_PRIVATE to disable balance_ref_count as this
-+		 * channel will not be published in the general-purpose
-+		 * allocator
-+		 */
-+		dma_cap_set(DMA_PRIVATE, device->cap_mask);
-+		device->privatecnt++;
-+		err = dma_chan_get(chan);
-+
-+		if (err) {
-+			if (err == -ENODEV) {
-+				pr_debug("%s: %s module removed\n", __func__,
-+					 dma_chan_name(chan));
-+				list_del_rcu(&device->global_node);
-+			} else
-+				pr_debug("%s: failed to get %s: (%d)\n",
-+					 __func__, dma_chan_name(chan), err);
-+
-+			if (--device->privatecnt == 0)
-+				dma_cap_clear(DMA_PRIVATE, device->cap_mask);
-+
-+			chan = ERR_PTR(err);
-+		}
-+	}
-+
-+	return chan ? chan : ERR_PTR(-EPROBE_DEFER);
-+}
-+
- /**
-  * dma_get_slave_channel - try to get specific channel exclusively
-  * @chan: target channel
-@@ -580,7 +616,6 @@ struct dma_chan *dma_get_any_slave_chann
- {
- 	dma_cap_mask_t mask;
- 	struct dma_chan *chan;
--	int err;
- 
- 	dma_cap_zero(mask);
- 	dma_cap_set(DMA_SLAVE, mask);
-@@ -588,23 +623,11 @@ struct dma_chan *dma_get_any_slave_chann
- 	/* lock against __dma_request_channel */
- 	mutex_lock(&dma_list_mutex);
- 
--	chan = private_candidate(&mask, device, NULL, NULL);
--	if (chan) {
--		dma_cap_set(DMA_PRIVATE, device->cap_mask);
--		device->privatecnt++;
--		err = dma_chan_get(chan);
--		if (err) {
--			pr_debug("%s: failed to get %s: (%d)\n",
--				__func__, dma_chan_name(chan), err);
--			chan = NULL;
--			if (--device->privatecnt == 0)
--				dma_cap_clear(DMA_PRIVATE, device->cap_mask);
--		}
--	}
-+	chan = find_candidate(device, &mask, NULL, NULL);
- 
- 	mutex_unlock(&dma_list_mutex);
- 
--	return chan;
-+	return IS_ERR(chan) ? NULL : chan;
- }
- EXPORT_SYMBOL_GPL(dma_get_any_slave_channel);
- 
-@@ -621,35 +644,15 @@ struct dma_chan *__dma_request_channel(c
- {
- 	struct dma_device *device, *_d;
- 	struct dma_chan *chan = NULL;
--	int err;
- 
- 	/* Find a channel */
- 	mutex_lock(&dma_list_mutex);
- 	list_for_each_entry_safe(device, _d, &dma_device_list, global_node) {
--		chan = private_candidate(mask, device, fn, fn_param);
--		if (chan) {
--			/* Found a suitable channel, try to grab, prep, and
--			 * return it.  We first set DMA_PRIVATE to disable
--			 * balance_ref_count as this channel will not be
--			 * published in the general-purpose allocator
--			 */
--			dma_cap_set(DMA_PRIVATE, device->cap_mask);
--			device->privatecnt++;
--			err = dma_chan_get(chan);
-+		chan = find_candidate(device, mask, fn, fn_param);
-+		if (!IS_ERR(chan))
-+			break;
- 
--			if (err == -ENODEV) {
--				pr_debug("%s: %s module removed\n",
--					 __func__, dma_chan_name(chan));
--				list_del_rcu(&device->global_node);
--			} else if (err)
--				pr_debug("%s: failed to get %s: (%d)\n",
--					 __func__, dma_chan_name(chan), err);
--			else
--				break;
--			if (--device->privatecnt == 0)
--				dma_cap_clear(DMA_PRIVATE, device->cap_mask);
--			chan = NULL;
--		}
-+		chan = NULL;
- 	}
- 	mutex_unlock(&dma_list_mutex);
- 
diff --git a/target/linux/apm821xx/patches-4.4/011-dmaengine-core-Introduce-new-universal-API-to-reques.patch b/target/linux/apm821xx/patches-4.4/011-dmaengine-core-Introduce-new-universal-API-to-reques.patch
deleted file mode 100644
index 7a0e26f6a3..0000000000
--- a/target/linux/apm821xx/patches-4.4/011-dmaengine-core-Introduce-new-universal-API-to-reques.patch
+++ /dev/null
@@ -1,335 +0,0 @@
-From a8135d0d79e9d0ad3a4ff494fceeaae838becf38 Mon Sep 17 00:00:00 2001
-From: Peter Ujfalusi <peter.ujfalusi@ti.com>
-Date: Mon, 14 Dec 2015 22:47:40 +0200
-Subject: [PATCH 2/3] dmaengine: core: Introduce new, universal API to request
- a channel
-
-The two API function can cover most, if not all current APIs used to
-request a channel. With minimal effort dmaengine drivers, platforms and
-dmaengine user drivers can be converted to use the two function.
-
-struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask);
-
-To request any channel matching with the requested capabilities, can be
-used to request channel for memcpy, memset, xor, etc where no hardware
-synchronization is needed.
-
-struct dma_chan *dma_request_chan(struct device *dev, const char *name);
-To request a slave channel. The dma_request_chan() will try to find the
-channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode
-it will use a filter lookup table and retrieves the needed information from
-the dma_slave_map provided by the DMA drivers.
-This legacy mode needs changes in platform code, in dmaengine drivers and
-finally the dmaengine user drivers can be converted:
-
-For each dmaengine driver an array of DMA device, slave and the parameter
-for the filter function needs to be added:
-
-static const struct dma_slave_map da830_edma_map[] = {
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
-	{ "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
-	{ "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
-};
-
-This information is going to be needed by the dmaengine driver, so
-modification to the platform_data is needed, and the driver map should be
-added to the pdata of the DMA driver:
-
-da8xx_edma0_pdata.slave_map = da830_edma_map;
-da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
-
-The DMA driver then needs to configure the needed device -> filter_fn
-mapping before it registers with dma_async_device_register() :
-
-ecc->dma_slave.filter_map.map = info->slave_map;
-ecc->dma_slave.filter_map.mapcnt = info->slavecnt;
-ecc->dma_slave.filter_map.fn = edma_filter_fn;
-
-When neither DT or ACPI lookup is available the dma_request_chan() will
-try to match the requester's device name with the filter_map's list of
-device names, when a match found it will use the information from the
-dma_slave_map to get the channel with the dma_get_channel() internal
-function.
-
-Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
-Reviewed-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Vinod Koul <vinod.koul@intel.com>
----
- Documentation/dmaengine/client.txt | 23 +++-------
- drivers/dma/dmaengine.c            | 89 +++++++++++++++++++++++++++++++++-----
- include/linux/dmaengine.h          | 51 +++++++++++++++++++---
- 3 files changed, 127 insertions(+), 36 deletions(-)
-
---- a/Documentation/dmaengine/client.txt
-+++ b/Documentation/dmaengine/client.txt
-@@ -22,25 +22,14 @@ The slave DMA usage consists of followin
-    Channel allocation is slightly different in the slave DMA context,
-    client drivers typically need a channel from a particular DMA
-    controller only and even in some cases a specific channel is desired.
--   To request a channel dma_request_channel() API is used.
-+   To request a channel dma_request_chan() API is used.
- 
-    Interface:
--	struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
--			dma_filter_fn filter_fn,
--			void *filter_param);
--   where dma_filter_fn is defined as:
--	typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
-+	struct dma_chan *dma_request_chan(struct device *dev, const char *name);
- 
--   The 'filter_fn' parameter is optional, but highly recommended for
--   slave and cyclic channels as they typically need to obtain a specific
--   DMA channel.
--
--   When the optional 'filter_fn' parameter is NULL, dma_request_channel()
--   simply returns the first channel that satisfies the capability mask.
--
--   Otherwise, the 'filter_fn' routine will be called once for each free
--   channel which has a capability in 'mask'.  'filter_fn' is expected to
--   return 'true' when the desired DMA channel is found.
-+   Which will find and return the 'name' DMA channel associated with the 'dev'
-+   device. The association is done via DT, ACPI or board file based
-+   dma_slave_map matching table.
- 
-    A channel allocated via this interface is exclusive to the caller,
-    until dma_release_channel() is called.
---- a/drivers/dma/dmaengine.c
-+++ b/drivers/dma/dmaengine.c
-@@ -43,6 +43,7 @@
- 
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- 
-+#include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/init.h>
- #include <linux/module.h>
-@@ -665,27 +666,73 @@ struct dma_chan *__dma_request_channel(c
- }
- EXPORT_SYMBOL_GPL(__dma_request_channel);
- 
-+static const struct dma_slave_map *dma_filter_match(struct dma_device *device,
-+						    const char *name,
-+						    struct device *dev)
-+{
-+	int i;
-+
-+	if (!device->filter.mapcnt)
-+		return NULL;
-+
-+	for (i = 0; i < device->filter.mapcnt; i++) {
-+		const struct dma_slave_map *map = &device->filter.map[i];
-+
-+		if (!strcmp(map->devname, dev_name(dev)) &&
-+		    !strcmp(map->slave, name))
-+			return map;
-+	}
-+
-+	return NULL;
-+}
-+
- /**
-- * dma_request_slave_channel_reason - try to allocate an exclusive slave channel
-+ * dma_request_chan - try to allocate an exclusive slave channel
-  * @dev:	pointer to client device structure
-  * @name:	slave channel name
-  *
-  * Returns pointer to appropriate DMA channel on success or an error pointer.
-  */
--struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
--						  const char *name)
-+struct dma_chan *dma_request_chan(struct device *dev, const char *name)
- {
-+	struct dma_device *d, *_d;
-+	struct dma_chan *chan = NULL;
-+
- 	/* If device-tree is present get slave info from here */
- 	if (dev->of_node)
--		return of_dma_request_slave_channel(dev->of_node, name);
-+		chan = of_dma_request_slave_channel(dev->of_node, name);
- 
- 	/* If device was enumerated by ACPI get slave info from here */
--	if (ACPI_HANDLE(dev))
--		return acpi_dma_request_slave_chan_by_name(dev, name);
-+	if (has_acpi_companion(dev) && !chan)
-+		chan = acpi_dma_request_slave_chan_by_name(dev, name);
-+
-+	if (chan) {
-+		/* Valid channel found or requester need to be deferred */
-+		if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER)
-+			return chan;
-+	}
-+
-+	/* Try to find the channel via the DMA filter map(s) */
-+	mutex_lock(&dma_list_mutex);
-+	list_for_each_entry_safe(d, _d, &dma_device_list, global_node) {
-+		dma_cap_mask_t mask;
-+		const struct dma_slave_map *map = dma_filter_match(d, name, dev);
-+
-+		if (!map)
-+			continue;
-+
-+		dma_cap_zero(mask);
-+		dma_cap_set(DMA_SLAVE, mask);
- 
--	return ERR_PTR(-ENODEV);
-+		chan = find_candidate(d, &mask, d->filter.fn, map->param);
-+		if (!IS_ERR(chan))
-+			break;
-+	}
-+	mutex_unlock(&dma_list_mutex);
-+
-+	return chan ? chan : ERR_PTR(-EPROBE_DEFER);
- }
--EXPORT_SYMBOL_GPL(dma_request_slave_channel_reason);
-+EXPORT_SYMBOL_GPL(dma_request_chan);
- 
- /**
-  * dma_request_slave_channel - try to allocate an exclusive slave channel
-@@ -697,17 +744,35 @@ EXPORT_SYMBOL_GPL(dma_request_slave_chan
- struct dma_chan *dma_request_slave_channel(struct device *dev,
- 					   const char *name)
- {
--	struct dma_chan *ch = dma_request_slave_channel_reason(dev, name);
-+	struct dma_chan *ch = dma_request_chan(dev, name);
- 	if (IS_ERR(ch))
- 		return NULL;
- 
--	dma_cap_set(DMA_PRIVATE, ch->device->cap_mask);
--	ch->device->privatecnt++;
--
- 	return ch;
- }
- EXPORT_SYMBOL_GPL(dma_request_slave_channel);
- 
-+/**
-+ * dma_request_chan_by_mask - allocate a channel satisfying certain capabilities
-+ * @mask: capabilities that the channel must satisfy
-+ *
-+ * Returns pointer to appropriate DMA channel on success or an error pointer.
-+ */
-+struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask)
-+{
-+	struct dma_chan *chan;
-+
-+	if (!mask)
-+		return ERR_PTR(-ENODEV);
-+
-+	chan = __dma_request_channel(mask, NULL, NULL);
-+	if (!chan)
-+		chan = ERR_PTR(-ENODEV);
-+
-+	return chan;
-+}
-+EXPORT_SYMBOL_GPL(dma_request_chan_by_mask);
-+
- void dma_release_channel(struct dma_chan *chan)
- {
- 	mutex_lock(&dma_list_mutex);
---- a/include/linux/dmaengine.h
-+++ b/include/linux/dmaengine.h
-@@ -607,11 +607,38 @@ enum dmaengine_alignment {
- };
- 
- /**
-+ * struct dma_slave_map - associates slave device and it's slave channel with
-+ * parameter to be used by a filter function
-+ * @devname: name of the device
-+ * @slave: slave channel name
-+ * @param: opaque parameter to pass to struct dma_filter.fn
-+ */
-+struct dma_slave_map {
-+	const char *devname;
-+	const char *slave;
-+	void *param;
-+};
-+
-+/**
-+ * struct dma_filter - information for slave device/channel to filter_fn/param
-+ * mapping
-+ * @fn: filter function callback
-+ * @mapcnt: number of slave device/channel in the map
-+ * @map: array of channel to filter mapping data
-+ */
-+struct dma_filter {
-+	dma_filter_fn fn;
-+	int mapcnt;
-+	const struct dma_slave_map *map;
-+};
-+
-+/**
-  * struct dma_device - info on the entity supplying DMA services
-  * @chancnt: how many DMA channels are supported
-  * @privatecnt: how many DMA channels are requested by dma_request_channel
-  * @channels: the list of struct dma_chan
-  * @global_node: list_head for global dma_device_list
-+ * @filter: information for device/slave to filter function/param mapping
-  * @cap_mask: one or more dma_capability flags
-  * @max_xor: maximum number of xor sources, 0 if no capability
-  * @max_pq: maximum number of PQ sources and PQ-continue capability
-@@ -666,6 +693,7 @@ struct dma_device {
- 	unsigned int privatecnt;
- 	struct list_head channels;
- 	struct list_head global_node;
-+	struct dma_filter filter;
- 	dma_cap_mask_t  cap_mask;
- 	unsigned short max_xor;
- 	unsigned short max_pq;
-@@ -1140,9 +1168,11 @@ enum dma_status dma_wait_for_async_tx(st
- void dma_issue_pending_all(void);
- struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
- 					dma_filter_fn fn, void *fn_param);
--struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
--						  const char *name);
- struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name);
-+
-+struct dma_chan *dma_request_chan(struct device *dev, const char *name);
-+struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask);
-+
- void dma_release_channel(struct dma_chan *chan);
- int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps);
- #else
-@@ -1166,16 +1196,21 @@ static inline struct dma_chan *__dma_req
- {
- 	return NULL;
- }
--static inline struct dma_chan *dma_request_slave_channel_reason(
--					struct device *dev, const char *name)
--{
--	return ERR_PTR(-ENODEV);
--}
- static inline struct dma_chan *dma_request_slave_channel(struct device *dev,
- 							 const char *name)
- {
- 	return NULL;
- }
-+static inline struct dma_chan *dma_request_chan(struct device *dev,
-+						const char *name)
-+{
-+	return ERR_PTR(-ENODEV);
-+}
-+static inline struct dma_chan *dma_request_chan_by_mask(
-+						const dma_cap_mask_t *mask)
-+{
-+	return ERR_PTR(-ENODEV);
-+}
- static inline void dma_release_channel(struct dma_chan *chan)
- {
- }
-@@ -1186,6 +1221,8 @@ static inline int dma_get_slave_caps(str
- }
- #endif
- 
-+#define dma_request_slave_channel_reason(dev, name) dma_request_chan(dev, name)
-+
- static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx)
- {
- 	struct dma_slave_caps caps;
diff --git a/target/linux/apm821xx/patches-4.4/012-dmaengine-Add-transfer-termination-synchronization-s.patch b/target/linux/apm821xx/patches-4.4/012-dmaengine-Add-transfer-termination-synchronization-s.patch
deleted file mode 100644
index 21efb046c2..0000000000
--- a/target/linux/apm821xx/patches-4.4/012-dmaengine-Add-transfer-termination-synchronization-s.patch
+++ /dev/null
@@ -1,282 +0,0 @@
-From b36f09c3c441a6e59eab9315032e7d546571de3f Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Tue, 20 Oct 2015 11:46:28 +0200
-Subject: [PATCH] dmaengine: Add transfer termination synchronization support
-
-The DMAengine API has a long standing race condition that is inherent to
-the API itself. Calling dmaengine_terminate_all() is supposed to stop and
-abort any pending or active transfers that have previously been submitted.
-Unfortunately it is possible that this operation races against a currently
-running (or with some drivers also scheduled) completion callback.
-
-Since the API allows dmaengine_terminate_all() to be called from atomic
-context as well as from within a completion callback it is not possible to
-synchronize to the execution of the completion callback from within
-dmaengine_terminate_all() itself.
-
-This means that a user of the DMAengine API does not know when it is safe
-to free resources used in the completion callback, which can result in a
-use-after-free race condition.
-
-This patch addresses the issue by introducing an explicit synchronization
-primitive to the DMAengine API called dmaengine_synchronize().
-
-The existing dmaengine_terminate_all() is deprecated in favor of
-dmaengine_terminate_sync() and dmaengine_terminate_async(). The former
-aborts all pending and active transfers and synchronizes to the current
-context, meaning it will wait until all running completion callbacks have
-finished. This means it is only possible to call this function from
-non-atomic context. The later function does not synchronize, but can still
-be used in atomic context or from within a complete callback. It has to be
-followed up by dmaengine_synchronize() before a client can free the
-resources used in a completion callback.
-
-In addition to this the semantics of the device_terminate_all() callback
-are slightly relaxed by this patch. It is now OK for a driver to only
-schedule the termination of the active transfer, but does not necessarily
-have to wait until the DMA controller has completely stopped. The driver
-must ensure though that the controller has stopped and no longer accesses
-any memory when the device_synchronize() callback returns.
-
-This was in part done since most drivers do not pay attention to this
-anyway at the moment and to emphasize that this needs to be done when the
-device_synchronize() callback is implemented. But it also helps with
-implementing support for devices where stopping the controller can require
-operations that may sleep.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
-Signed-off-by: Vinod Koul <vinod.koul@intel.com>
----
- Documentation/dmaengine/client.txt   | 38 ++++++++++++++-
- Documentation/dmaengine/provider.txt | 20 +++++++-
- drivers/dma/dmaengine.c              |  5 +-
- include/linux/dmaengine.h            | 90 ++++++++++++++++++++++++++++++++++++
- 4 files changed, 148 insertions(+), 5 deletions(-)
-
---- a/Documentation/dmaengine/client.txt
-+++ b/Documentation/dmaengine/client.txt
-@@ -117,7 +117,7 @@ The slave DMA usage consists of followin
- 	transaction.
- 
- 	For cyclic DMA, a callback function may wish to terminate the
--	DMA via dmaengine_terminate_all().
-+	DMA via dmaengine_terminate_async().
- 
- 	Therefore, it is important that DMA engine drivers drop any
- 	locks before calling the callback function which may cause a
-@@ -155,12 +155,29 @@ The slave DMA usage consists of followin
- 
- Further APIs:
- 
--1. int dmaengine_terminate_all(struct dma_chan *chan)
-+1. int dmaengine_terminate_sync(struct dma_chan *chan)
-+   int dmaengine_terminate_async(struct dma_chan *chan)
-+   int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */
- 
-    This causes all activity for the DMA channel to be stopped, and may
-    discard data in the DMA FIFO which hasn't been fully transferred.
-    No callback functions will be called for any incomplete transfers.
- 
-+   Two variants of this function are available.
-+
-+   dmaengine_terminate_async() might not wait until the DMA has been fully
-+   stopped or until any running complete callbacks have finished. But it is
-+   possible to call dmaengine_terminate_async() from atomic context or from
-+   within a complete callback. dmaengine_synchronize() must be called before it
-+   is safe to free the memory accessed by the DMA transfer or free resources
-+   accessed from within the complete callback.
-+
-+   dmaengine_terminate_sync() will wait for the transfer and any running
-+   complete callbacks to finish before it returns. But the function must not be
-+   called from atomic context or from within a complete callback.
-+
-+   dmaengine_terminate_all() is deprecated and should not be used in new code.
-+
- 2. int dmaengine_pause(struct dma_chan *chan)
- 
-    This pauses activity on the DMA channel without data loss.
-@@ -186,3 +203,20 @@ Further APIs:
- 	a running DMA channel.  It is recommended that DMA engine users
- 	pause or stop (via dmaengine_terminate_all()) the channel before
- 	using this API.
-+
-+5. void dmaengine_synchronize(struct dma_chan *chan)
-+
-+  Synchronize the termination of the DMA channel to the current context.
-+
-+  This function should be used after dmaengine_terminate_async() to synchronize
-+  the termination of the DMA channel to the current context. The function will
-+  wait for the transfer and any running complete callbacks to finish before it
-+  returns.
-+
-+  If dmaengine_terminate_async() is used to stop the DMA channel this function
-+  must be called before it is safe to free memory accessed by previously
-+  submitted descriptors or to free any resources accessed within the complete
-+  callback of previously submitted descriptors.
-+
-+  The behavior of this function is undefined if dma_async_issue_pending() has
-+  been called between dmaengine_terminate_async() and this function.
---- a/Documentation/dmaengine/provider.txt
-+++ b/Documentation/dmaengine/provider.txt
-@@ -327,8 +327,24 @@ supported.
- 
-    * device_terminate_all
-      - Aborts all the pending and ongoing transfers on the channel
--     - This command should operate synchronously on the channel,
--       terminating right away all the channels
-+     - For aborted transfers the complete callback should not be called
-+     - Can be called from atomic context or from within a complete
-+       callback of a descriptor. Must not sleep. Drivers must be able
-+       to handle this correctly.
-+     - Termination may be asynchronous. The driver does not have to
-+       wait until the currently active transfer has completely stopped.
-+       See device_synchronize.
-+
-+   * device_synchronize
-+     - Must synchronize the termination of a channel to the current
-+       context.
-+     - Must make sure that memory for previously submitted
-+       descriptors is no longer accessed by the DMA controller.
-+     - Must make sure that all complete callbacks for previously
-+       submitted descriptors have finished running and none are
-+       scheduled to run.
-+     - May sleep.
-+
- 
- Misc notes (stuff that should be documented, but don't really know
- where to put them)
---- a/drivers/dma/dmaengine.c
-+++ b/drivers/dma/dmaengine.c
-@@ -266,8 +266,11 @@ static void dma_chan_put(struct dma_chan
- 	module_put(dma_chan_to_owner(chan));
- 
- 	/* This channel is not in use anymore, free it */
--	if (!chan->client_count && chan->device->device_free_chan_resources)
-+	if (!chan->client_count && chan->device->device_free_chan_resources) {
-+		/* Make sure all operations have completed */
-+		dmaengine_synchronize(chan);
- 		chan->device->device_free_chan_resources(chan);
-+	}
- 
- 	/* If the channel is used via a DMA request router, free the mapping */
- 	if (chan->router && chan->router->route_free) {
---- a/include/linux/dmaengine.h
-+++ b/include/linux/dmaengine.h
-@@ -681,6 +681,8 @@ struct dma_filter {
-  *	paused. Returns 0 or an error code
-  * @device_terminate_all: Aborts all transfers on a channel. Returns 0
-  *	or an error code
-+ * @device_synchronize: Synchronizes the termination of a transfers to the
-+ *  current context.
-  * @device_tx_status: poll for transaction completion, the optional
-  *	txstate parameter can be supplied with a pointer to get a
-  *	struct with auxiliary transfer status information, otherwise the call
-@@ -765,6 +767,7 @@ struct dma_device {
- 	int (*device_pause)(struct dma_chan *chan);
- 	int (*device_resume)(struct dma_chan *chan);
- 	int (*device_terminate_all)(struct dma_chan *chan);
-+	void (*device_synchronize)(struct dma_chan *chan);
- 
- 	enum dma_status (*device_tx_status)(struct dma_chan *chan,
- 					    dma_cookie_t cookie,
-@@ -856,6 +859,13 @@ static inline struct dma_async_tx_descri
- 			src_sg, src_nents, flags);
- }
- 
-+/**
-+ * dmaengine_terminate_all() - Terminate all active DMA transfers
-+ * @chan: The channel for which to terminate the transfers
-+ *
-+ * This function is DEPRECATED use either dmaengine_terminate_sync() or
-+ * dmaengine_terminate_async() instead.
-+ */
- static inline int dmaengine_terminate_all(struct dma_chan *chan)
- {
- 	if (chan->device->device_terminate_all)
-@@ -864,6 +874,86 @@ static inline int dmaengine_terminate_al
- 	return -ENOSYS;
- }
- 
-+/**
-+ * dmaengine_terminate_async() - Terminate all active DMA transfers
-+ * @chan: The channel for which to terminate the transfers
-+ *
-+ * Calling this function will terminate all active and pending descriptors
-+ * that have previously been submitted to the channel. It is not guaranteed
-+ * though that the transfer for the active descriptor has stopped when the
-+ * function returns. Furthermore it is possible the complete callback of a
-+ * submitted transfer is still running when this function returns.
-+ *
-+ * dmaengine_synchronize() needs to be called before it is safe to free
-+ * any memory that is accessed by previously submitted descriptors or before
-+ * freeing any resources accessed from within the completion callback of any
-+ * perviously submitted descriptors.
-+ *
-+ * This function can be called from atomic context as well as from within a
-+ * complete callback of a descriptor submitted on the same channel.
-+ *
-+ * If none of the two conditions above apply consider using
-+ * dmaengine_terminate_sync() instead.
-+ */
-+static inline int dmaengine_terminate_async(struct dma_chan *chan)
-+{
-+	if (chan->device->device_terminate_all)
-+		return chan->device->device_terminate_all(chan);
-+
-+	return -EINVAL;
-+}
-+
-+/**
-+ * dmaengine_synchronize() - Synchronize DMA channel termination
-+ * @chan: The channel to synchronize
-+ *
-+ * Synchronizes to the DMA channel termination to the current context. When this
-+ * function returns it is guaranteed that all transfers for previously issued
-+ * descriptors have stopped and and it is safe to free the memory assoicated
-+ * with them. Furthermore it is guaranteed that all complete callback functions
-+ * for a previously submitted descriptor have finished running and it is safe to
-+ * free resources accessed from within the complete callbacks.
-+ *
-+ * The behavior of this function is undefined if dma_async_issue_pending() has
-+ * been called between dmaengine_terminate_async() and this function.
-+ *
-+ * This function must only be called from non-atomic context and must not be
-+ * called from within a complete callback of a descriptor submitted on the same
-+ * channel.
-+ */
-+static inline void dmaengine_synchronize(struct dma_chan *chan)
-+{
-+	if (chan->device->device_synchronize)
-+		chan->device->device_synchronize(chan);
-+}
-+
-+/**
-+ * dmaengine_terminate_sync() - Terminate all active DMA transfers
-+ * @chan: The channel for which to terminate the transfers
-+ *
-+ * Calling this function will terminate all active and pending transfers
-+ * that have previously been submitted to the channel. It is similar to
-+ * dmaengine_terminate_async() but guarantees that the DMA transfer has actually
-+ * stopped and that all complete callbacks have finished running when the
-+ * function returns.
-+ *
-+ * This function must only be called from non-atomic context and must not be
-+ * called from within a complete callback of a descriptor submitted on the same
-+ * channel.
-+ */
-+static inline int dmaengine_terminate_sync(struct dma_chan *chan)
-+{
-+	int ret;
-+
-+	ret = dmaengine_terminate_async(chan);
-+	if (ret)
-+		return ret;
-+
-+	dmaengine_synchronize(chan);
-+
-+	return 0;
-+}
-+
- static inline int dmaengine_pause(struct dma_chan *chan)
- {
- 	if (chan->device->device_pause)
diff --git a/target/linux/apm821xx/patches-4.4/015-dmaengine-dw-fixed.patch b/target/linux/apm821xx/patches-4.4/015-dmaengine-dw-fixed.patch
deleted file mode 100644
index 0380088547..0000000000
--- a/target/linux/apm821xx/patches-4.4/015-dmaengine-dw-fixed.patch
+++ /dev/null
@@ -1,1517 +0,0 @@
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Subject: [PATCH v6 0/4] Fixes / cleanups in dw_dmac (affects on few subsystems)
-Date: Mon, 25 Apr 2016 15:35:05 +0300
-
-This patch series (v3: http://www.spinics.net/lists/kernel/msg2215303.html)
-contains a number of mostly minor fixes and cleanups for the DW DMA driver. A
-couple of them affect the DT binding so these may need to be updated to
-maintain compatibility (old format is still supported though). The rest should
-be relatively straight-forward.
-
-This version has been tested on the following bare metal platforms:
-- ATNGW100 (avr32 based platform) with dmatest
-- Sam460ex (powerpc 44x based platform) with SATA
-- Intel Braswell with UART
-- Intel Galileo (Intel Quark based platform) with UART
-
-(SATA driver and Intel Galileo UART support are based on this series and just
- published recently for a review)
-
-Vinod, there are few patch sets developed on top of this one, so, the idea is
-to keep this in an immuutable branch / tag.
-
-Changes since v5:
-- fixed an issue found by kbuildbot
-
-Changes since v4:
-- send proper set of patches
-- add changelog
-
-Changes since v3:
-- add patch 1 to check value of dma-masters property
-- drop the upstreamed patches
-- update patch 2 to keep an array for data-width property as well
-
-Changes since v2:
-- add patch 1 to fix master selection which was broken for long time
-- remove "use field-by-field initialization" patch since like Mans metioned in
-  has mostly no value and even might increase error prone
-- rebase on top of recent linux-next
-- wide testing on several platforms
-
-Changes since v1:
-- zeroing struct dw_dma_slave before use
-- fall back to old data_width property if data-width is not found
-- append tags for few patches
-- correct title of cover letter
-- rebase on top of recent linux-next
-
-Andy Shevchenko (4):
-  dmaengine: dw: platform: check nr_masters to be non-zero
-  dmaengine: dw: revisit data_width property
-  dmaengine: dw: keep entire platform data in struct dw_dma
-  dmaengine: dw: pass platform data via struct dw_dma_chip
-
- Documentation/devicetree/bindings/dma/snps-dma.txt |  6 +-
- arch/arc/boot/dts/abilis_tb10x.dtsi                |  2 +-
- arch/arm/boot/dts/spear13xx.dtsi                   |  4 +-
- drivers/ata/sata_dwc_460ex.c                       |  2 +-
- drivers/dma/dw/core.c                              | 75 ++++++++--------------
- drivers/dma/dw/pci.c                               |  5 +-
- drivers/dma/dw/platform.c                          | 32 +++++----
- drivers/dma/dw/regs.h                              |  5 +-
- include/linux/dma/dw.h                             |  5 +-
- include/linux/platform_data/dma-dw.h               |  4 +-
- sound/soc/intel/common/sst-firmware.c              |  2 +-
- 11 files changed, 64 insertions(+), 78 deletions(-)
-
---- a/drivers/dma/dw/core.c
-+++ b/drivers/dma/dw/core.c
-@@ -45,22 +45,19 @@
- 			DW_DMA_MSIZE_16;			\
- 		u8 _dmsize = _is_slave ? _sconfig->dst_maxburst :	\
- 			DW_DMA_MSIZE_16;			\
-+		u8 _dms = (_dwc->direction == DMA_MEM_TO_DEV) ?		\
-+			_dwc->p_master : _dwc->m_master;		\
-+		u8 _sms = (_dwc->direction == DMA_DEV_TO_MEM) ?		\
-+			_dwc->p_master : _dwc->m_master;		\
- 								\
- 		(DWC_CTLL_DST_MSIZE(_dmsize)			\
- 		 | DWC_CTLL_SRC_MSIZE(_smsize)			\
- 		 | DWC_CTLL_LLP_D_EN				\
- 		 | DWC_CTLL_LLP_S_EN				\
--		 | DWC_CTLL_DMS(_dwc->dst_master)		\
--		 | DWC_CTLL_SMS(_dwc->src_master));		\
-+		 | DWC_CTLL_DMS(_dms)				\
-+		 | DWC_CTLL_SMS(_sms));				\
- 	})
- 
--/*
-- * Number of descriptors to allocate for each channel. This should be
-- * made configurable somehow; preferably, the clients (at least the
-- * ones using slave transfers) should be able to give us a hint.
-- */
--#define NR_DESCS_PER_CHANNEL	64
--
- /* The set of bus widths supported by the DMA controller */
- #define DW_DMA_BUSWIDTHS			  \
- 	BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED)	| \
-@@ -80,51 +77,65 @@ static struct dw_desc *dwc_first_active(
- 	return to_dw_desc(dwc->active_list.next);
- }
- 
--static struct dw_desc *dwc_desc_get(struct dw_dma_chan *dwc)
-+static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx)
- {
--	struct dw_desc *desc, *_desc;
--	struct dw_desc *ret = NULL;
--	unsigned int i = 0;
--	unsigned long flags;
-+	struct dw_desc		*desc = txd_to_dw_desc(tx);
-+	struct dw_dma_chan	*dwc = to_dw_dma_chan(tx->chan);
-+	dma_cookie_t		cookie;
-+	unsigned long		flags;
- 
- 	spin_lock_irqsave(&dwc->lock, flags);
--	list_for_each_entry_safe(desc, _desc, &dwc->free_list, desc_node) {
--		i++;
--		if (async_tx_test_ack(&desc->txd)) {
--			list_del(&desc->desc_node);
--			ret = desc;
--			break;
--		}
--		dev_dbg(chan2dev(&dwc->chan), "desc %p not ACKed\n", desc);
--	}
-+	cookie = dma_cookie_assign(tx);
-+
-+	/*
-+	 * REVISIT: We should attempt to chain as many descriptors as
-+	 * possible, perhaps even appending to those already submitted
-+	 * for DMA. But this is hard to do in a race-free manner.
-+	 */
-+
-+	list_add_tail(&desc->desc_node, &dwc->queue);
- 	spin_unlock_irqrestore(&dwc->lock, flags);
-+	dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n",
-+		 __func__, desc->txd.cookie);
- 
--	dev_vdbg(chan2dev(&dwc->chan), "scanned %u descriptors on freelist\n", i);
-+	return cookie;
-+}
- 
--	return ret;
-+static struct dw_desc *dwc_desc_get(struct dw_dma_chan *dwc)
-+{
-+	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
-+	struct dw_desc *desc;
-+	dma_addr_t phys;
-+
-+	desc = dma_pool_zalloc(dw->desc_pool, GFP_ATOMIC, &phys);
-+	if (!desc)
-+		return NULL;
-+
-+	dwc->descs_allocated++;
-+	INIT_LIST_HEAD(&desc->tx_list);
-+	dma_async_tx_descriptor_init(&desc->txd, &dwc->chan);
-+	desc->txd.tx_submit = dwc_tx_submit;
-+	desc->txd.flags = DMA_CTRL_ACK;
-+	desc->txd.phys = phys;
-+	return desc;
- }
- 
--/*
-- * Move a descriptor, including any children, to the free list.
-- * `desc' must not be on any lists.
-- */
- static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc)
- {
--	unsigned long flags;
-+	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
-+	struct dw_desc *child, *_next;
- 
--	if (desc) {
--		struct dw_desc *child;
-+	if (unlikely(!desc))
-+		return;
- 
--		spin_lock_irqsave(&dwc->lock, flags);
--		list_for_each_entry(child, &desc->tx_list, desc_node)
--			dev_vdbg(chan2dev(&dwc->chan),
--					"moving child desc %p to freelist\n",
--					child);
--		list_splice_init(&desc->tx_list, &dwc->free_list);
--		dev_vdbg(chan2dev(&dwc->chan), "moving desc %p to freelist\n", desc);
--		list_add(&desc->desc_node, &dwc->free_list);
--		spin_unlock_irqrestore(&dwc->lock, flags);
-+	list_for_each_entry_safe(child, _next, &desc->tx_list, desc_node) {
-+		list_del(&child->desc_node);
-+		dma_pool_free(dw->desc_pool, child, child->txd.phys);
-+		dwc->descs_allocated--;
- 	}
-+
-+	dma_pool_free(dw->desc_pool, desc, desc->txd.phys);
-+	dwc->descs_allocated--;
- }
- 
- static void dwc_initialize(struct dw_dma_chan *dwc)
-@@ -133,7 +144,7 @@ static void dwc_initialize(struct dw_dma
- 	u32 cfghi = DWC_CFGH_FIFO_MODE;
- 	u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
- 
--	if (dwc->initialized == true)
-+	if (test_bit(DW_DMA_IS_INITIALIZED, &dwc->flags))
- 		return;
- 
- 	cfghi |= DWC_CFGH_DST_PER(dwc->dst_id);
-@@ -146,26 +157,11 @@ static void dwc_initialize(struct dw_dma
- 	channel_set_bit(dw, MASK.XFER, dwc->mask);
- 	channel_set_bit(dw, MASK.ERROR, dwc->mask);
- 
--	dwc->initialized = true;
-+	set_bit(DW_DMA_IS_INITIALIZED, &dwc->flags);
- }
- 
- /*----------------------------------------------------------------------*/
- 
--static inline unsigned int dwc_fast_ffs(unsigned long long v)
--{
--	/*
--	 * We can be a lot more clever here, but this should take care
--	 * of the most common optimization.
--	 */
--	if (!(v & 7))
--		return 3;
--	else if (!(v & 3))
--		return 2;
--	else if (!(v & 1))
--		return 1;
--	return 0;
--}
--
- static inline void dwc_dump_chan_regs(struct dw_dma_chan *dwc)
- {
- 	dev_err(chan2dev(&dwc->chan),
-@@ -197,12 +193,12 @@ static inline void dwc_do_single_block(s
- 	 * Software emulation of LLP mode relies on interrupts to continue
- 	 * multi block transfer.
- 	 */
--	ctllo = desc->lli.ctllo | DWC_CTLL_INT_EN;
-+	ctllo = lli_read(desc, ctllo) | DWC_CTLL_INT_EN;
- 
--	channel_writel(dwc, SAR, desc->lli.sar);
--	channel_writel(dwc, DAR, desc->lli.dar);
-+	channel_writel(dwc, SAR, lli_read(desc, sar));
-+	channel_writel(dwc, DAR, lli_read(desc, dar));
- 	channel_writel(dwc, CTL_LO, ctllo);
--	channel_writel(dwc, CTL_HI, desc->lli.ctlhi);
-+	channel_writel(dwc, CTL_HI, lli_read(desc, ctlhi));
- 	channel_set_bit(dw, CH_EN, dwc->mask);
- 
- 	/* Move pointer to next descriptor */
-@@ -213,6 +209,7 @@ static inline void dwc_do_single_block(s
- static void dwc_dostart(struct dw_dma_chan *dwc, struct dw_desc *first)
- {
- 	struct dw_dma	*dw = to_dw_dma(dwc->chan.device);
-+	u8		lms = DWC_LLP_LMS(dwc->m_master);
- 	unsigned long	was_soft_llp;
- 
- 	/* ASSERT:  channel is idle */
-@@ -237,7 +234,7 @@ static void dwc_dostart(struct dw_dma_ch
- 
- 		dwc_initialize(dwc);
- 
--		dwc->residue = first->total_len;
-+		first->residue = first->total_len;
- 		dwc->tx_node_active = &first->tx_list;
- 
- 		/* Submit first block */
-@@ -248,9 +245,8 @@ static void dwc_dostart(struct dw_dma_ch
- 
- 	dwc_initialize(dwc);
- 
--	channel_writel(dwc, LLP, first->txd.phys);
--	channel_writel(dwc, CTL_LO,
--			DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
-+	channel_writel(dwc, LLP, first->txd.phys | lms);
-+	channel_writel(dwc, CTL_LO, DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
- 	channel_writel(dwc, CTL_HI, 0);
- 	channel_set_bit(dw, CH_EN, dwc->mask);
- }
-@@ -293,11 +289,7 @@ dwc_descriptor_complete(struct dw_dma_ch
- 	list_for_each_entry(child, &desc->tx_list, desc_node)
- 		async_tx_ack(&child->txd);
- 	async_tx_ack(&desc->txd);
--
--	list_splice_init(&desc->tx_list, &dwc->free_list);
--	list_move(&desc->desc_node, &dwc->free_list);
--
--	dma_descriptor_unmap(txd);
-+	dwc_desc_put(dwc, desc);
- 	spin_unlock_irqrestore(&dwc->lock, flags);
- 
- 	if (callback)
-@@ -368,11 +360,11 @@ static void dwc_scan_descriptors(struct
- 
- 			head = &desc->tx_list;
- 			if (active != head) {
--				/* Update desc to reflect last sent one */
--				if (active != head->next)
--					desc = to_dw_desc(active->prev);
--
--				dwc->residue -= desc->len;
-+				/* Update residue to reflect last sent descriptor */
-+				if (active == head->next)
-+					desc->residue -= desc->len;
-+				else
-+					desc->residue -= to_dw_desc(active->prev)->len;
- 
- 				child = to_dw_desc(active);
- 
-@@ -387,8 +379,6 @@ static void dwc_scan_descriptors(struct
- 			clear_bit(DW_DMA_IS_SOFT_LLP, &dwc->flags);
- 		}
- 
--		dwc->residue = 0;
--
- 		spin_unlock_irqrestore(&dwc->lock, flags);
- 
- 		dwc_complete_all(dw, dwc);
-@@ -396,7 +386,6 @@ static void dwc_scan_descriptors(struct
- 	}
- 
- 	if (list_empty(&dwc->active_list)) {
--		dwc->residue = 0;
- 		spin_unlock_irqrestore(&dwc->lock, flags);
- 		return;
- 	}
-@@ -411,31 +400,31 @@ static void dwc_scan_descriptors(struct
- 
- 	list_for_each_entry_safe(desc, _desc, &dwc->active_list, desc_node) {
- 		/* Initial residue value */
--		dwc->residue = desc->total_len;
-+		desc->residue = desc->total_len;
- 
- 		/* Check first descriptors addr */
--		if (desc->txd.phys == llp) {
-+		if (desc->txd.phys == DWC_LLP_LOC(llp)) {
- 			spin_unlock_irqrestore(&dwc->lock, flags);
- 			return;
- 		}
- 
- 		/* Check first descriptors llp */
--		if (desc->lli.llp == llp) {
-+		if (lli_read(desc, llp) == llp) {
- 			/* This one is currently in progress */
--			dwc->residue -= dwc_get_sent(dwc);
-+			desc->residue -= dwc_get_sent(dwc);
- 			spin_unlock_irqrestore(&dwc->lock, flags);
- 			return;
- 		}
- 
--		dwc->residue -= desc->len;
-+		desc->residue -= desc->len;
- 		list_for_each_entry(child, &desc->tx_list, desc_node) {
--			if (child->lli.llp == llp) {
-+			if (lli_read(child, llp) == llp) {
- 				/* Currently in progress */
--				dwc->residue -= dwc_get_sent(dwc);
-+				desc->residue -= dwc_get_sent(dwc);
- 				spin_unlock_irqrestore(&dwc->lock, flags);
- 				return;
- 			}
--			dwc->residue -= child->len;
-+			desc->residue -= child->len;
- 		}
- 
- 		/*
-@@ -457,10 +446,14 @@ static void dwc_scan_descriptors(struct
- 	spin_unlock_irqrestore(&dwc->lock, flags);
- }
- 
--static inline void dwc_dump_lli(struct dw_dma_chan *dwc, struct dw_lli *lli)
-+static inline void dwc_dump_lli(struct dw_dma_chan *dwc, struct dw_desc *desc)
- {
- 	dev_crit(chan2dev(&dwc->chan), "  desc: s0x%x d0x%x l0x%x c0x%x:%x\n",
--		 lli->sar, lli->dar, lli->llp, lli->ctlhi, lli->ctllo);
-+		 lli_read(desc, sar),
-+		 lli_read(desc, dar),
-+		 lli_read(desc, llp),
-+		 lli_read(desc, ctlhi),
-+		 lli_read(desc, ctllo));
- }
- 
- static void dwc_handle_error(struct dw_dma *dw, struct dw_dma_chan *dwc)
-@@ -496,9 +489,9 @@ static void dwc_handle_error(struct dw_d
- 	 */
- 	dev_WARN(chan2dev(&dwc->chan), "Bad descriptor submitted for DMA!\n"
- 				       "  cookie: %d\n", bad_desc->txd.cookie);
--	dwc_dump_lli(dwc, &bad_desc->lli);
-+	dwc_dump_lli(dwc, bad_desc);
- 	list_for_each_entry(child, &bad_desc->tx_list, desc_node)
--		dwc_dump_lli(dwc, &child->lli);
-+		dwc_dump_lli(dwc, child);
- 
- 	spin_unlock_irqrestore(&dwc->lock, flags);
- 
-@@ -549,7 +542,7 @@ static void dwc_handle_cyclic(struct dw_
- 	 */
- 	if (unlikely(status_err & dwc->mask) ||
- 			unlikely(status_xfer & dwc->mask)) {
--		int i;
-+		unsigned int i;
- 
- 		dev_err(chan2dev(&dwc->chan),
- 			"cyclic DMA unexpected %s interrupt, stopping DMA transfer\n",
-@@ -571,7 +564,7 @@ static void dwc_handle_cyclic(struct dw_
- 		dma_writel(dw, CLEAR.XFER, dwc->mask);
- 
- 		for (i = 0; i < dwc->cdesc->periods; i++)
--			dwc_dump_lli(dwc, &dwc->cdesc->desc[i]->lli);
-+			dwc_dump_lli(dwc, dwc->cdesc->desc[i]);
- 
- 		spin_unlock_irqrestore(&dwc->lock, flags);
- 	}
-@@ -589,7 +582,7 @@ static void dw_dma_tasklet(unsigned long
- 	u32 status_block;
- 	u32 status_xfer;
- 	u32 status_err;
--	int i;
-+	unsigned int i;
- 
- 	status_block = dma_readl(dw, RAW.BLOCK);
- 	status_xfer = dma_readl(dw, RAW.XFER);
-@@ -616,12 +609,17 @@ static void dw_dma_tasklet(unsigned long
- static irqreturn_t dw_dma_interrupt(int irq, void *dev_id)
- {
- 	struct dw_dma *dw = dev_id;
--	u32 status = dma_readl(dw, STATUS_INT);
-+	u32 status;
-+
-+	/* Check if we have any interrupt from the DMAC which is not in use */
-+	if (!dw->in_use)
-+		return IRQ_NONE;
- 
-+	status = dma_readl(dw, STATUS_INT);
- 	dev_vdbg(dw->dma.dev, "%s: status=0x%x\n", __func__, status);
- 
- 	/* Check if we have any interrupt from the DMAC */
--	if (!status || !dw->in_use)
-+	if (!status)
- 		return IRQ_NONE;
- 
- 	/*
-@@ -653,30 +651,6 @@ static irqreturn_t dw_dma_interrupt(int
- 
- /*----------------------------------------------------------------------*/
- 
--static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx)
--{
--	struct dw_desc		*desc = txd_to_dw_desc(tx);
--	struct dw_dma_chan	*dwc = to_dw_dma_chan(tx->chan);
--	dma_cookie_t		cookie;
--	unsigned long		flags;
--
--	spin_lock_irqsave(&dwc->lock, flags);
--	cookie = dma_cookie_assign(tx);
--
--	/*
--	 * REVISIT: We should attempt to chain as many descriptors as
--	 * possible, perhaps even appending to those already submitted
--	 * for DMA. But this is hard to do in a race-free manner.
--	 */
--
--	dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n", __func__, desc->txd.cookie);
--	list_add_tail(&desc->desc_node, &dwc->queue);
--
--	spin_unlock_irqrestore(&dwc->lock, flags);
--
--	return cookie;
--}
--
- static struct dma_async_tx_descriptor *
- dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
- 		size_t len, unsigned long flags)
-@@ -688,10 +662,12 @@ dwc_prep_dma_memcpy(struct dma_chan *cha
- 	struct dw_desc		*prev;
- 	size_t			xfer_count;
- 	size_t			offset;
-+	u8			m_master = dwc->m_master;
- 	unsigned int		src_width;
- 	unsigned int		dst_width;
--	unsigned int		data_width;
-+	unsigned int		data_width = dw->pdata->data_width[m_master];
- 	u32			ctllo;
-+	u8			lms = DWC_LLP_LMS(m_master);
- 
- 	dev_vdbg(chan2dev(chan),
- 			"%s: d%pad s%pad l0x%zx f0x%lx\n", __func__,
-@@ -704,11 +680,7 @@ dwc_prep_dma_memcpy(struct dma_chan *cha
- 
- 	dwc->direction = DMA_MEM_TO_MEM;
- 
--	data_width = min_t(unsigned int, dw->data_width[dwc->src_master],
--			   dw->data_width[dwc->dst_master]);
--
--	src_width = dst_width = min_t(unsigned int, data_width,
--				      dwc_fast_ffs(src | dest | len));
-+	src_width = dst_width = __ffs(data_width | src | dest | len);
- 
- 	ctllo = DWC_DEFAULT_CTLLO(chan)
- 			| DWC_CTLL_DST_WIDTH(dst_width)
-@@ -726,27 +698,27 @@ dwc_prep_dma_memcpy(struct dma_chan *cha
- 		if (!desc)
- 			goto err_desc_get;
- 
--		desc->lli.sar = src + offset;
--		desc->lli.dar = dest + offset;
--		desc->lli.ctllo = ctllo;
--		desc->lli.ctlhi = xfer_count;
-+		lli_write(desc, sar, src + offset);
-+		lli_write(desc, dar, dest + offset);
-+		lli_write(desc, ctllo, ctllo);
-+		lli_write(desc, ctlhi, xfer_count);
- 		desc->len = xfer_count << src_width;
- 
- 		if (!first) {
- 			first = desc;
- 		} else {
--			prev->lli.llp = desc->txd.phys;
--			list_add_tail(&desc->desc_node,
--					&first->tx_list);
-+			lli_write(prev, llp, desc->txd.phys | lms);
-+			list_add_tail(&desc->desc_node, &first->tx_list);
- 		}
- 		prev = desc;
- 	}
- 
- 	if (flags & DMA_PREP_INTERRUPT)
- 		/* Trigger interrupt after last block */
--		prev->lli.ctllo |= DWC_CTLL_INT_EN;
-+		lli_set(prev, ctllo, DWC_CTLL_INT_EN);
- 
- 	prev->lli.llp = 0;
-+	lli_clear(prev, ctllo, DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
- 	first->txd.flags = flags;
- 	first->total_len = len;
- 
-@@ -768,10 +740,12 @@ dwc_prep_slave_sg(struct dma_chan *chan,
- 	struct dw_desc		*prev;
- 	struct dw_desc		*first;
- 	u32			ctllo;
-+	u8			m_master = dwc->m_master;
-+	u8			lms = DWC_LLP_LMS(m_master);
- 	dma_addr_t		reg;
- 	unsigned int		reg_width;
- 	unsigned int		mem_width;
--	unsigned int		data_width;
-+	unsigned int		data_width = dw->pdata->data_width[m_master];
- 	unsigned int		i;
- 	struct scatterlist	*sg;
- 	size_t			total_len = 0;
-@@ -797,8 +771,6 @@ dwc_prep_slave_sg(struct dma_chan *chan,
- 		ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
- 			DWC_CTLL_FC(DW_DMA_FC_D_M2P);
- 
--		data_width = dw->data_width[dwc->src_master];
--
- 		for_each_sg(sgl, sg, sg_len, i) {
- 			struct dw_desc	*desc;
- 			u32		len, dlen, mem;
-@@ -806,17 +778,16 @@ dwc_prep_slave_sg(struct dma_chan *chan,
- 			mem = sg_dma_address(sg);
- 			len = sg_dma_len(sg);
- 
--			mem_width = min_t(unsigned int,
--					  data_width, dwc_fast_ffs(mem | len));
-+			mem_width = __ffs(data_width | mem | len);
- 
- slave_sg_todev_fill_desc:
- 			desc = dwc_desc_get(dwc);
- 			if (!desc)
- 				goto err_desc_get;
- 
--			desc->lli.sar = mem;
--			desc->lli.dar = reg;
--			desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width);
-+			lli_write(desc, sar, mem);
-+			lli_write(desc, dar, reg);
-+			lli_write(desc, ctllo, ctllo | DWC_CTLL_SRC_WIDTH(mem_width));
- 			if ((len >> mem_width) > dwc->block_size) {
- 				dlen = dwc->block_size << mem_width;
- 				mem += dlen;
-@@ -826,15 +797,14 @@ slave_sg_todev_fill_desc:
- 				len = 0;
- 			}
- 
--			desc->lli.ctlhi = dlen >> mem_width;
-+			lli_write(desc, ctlhi, dlen >> mem_width);
- 			desc->len = dlen;
- 
- 			if (!first) {
- 				first = desc;
- 			} else {
--				prev->lli.llp = desc->txd.phys;
--				list_add_tail(&desc->desc_node,
--						&first->tx_list);
-+				lli_write(prev, llp, desc->txd.phys | lms);
-+				list_add_tail(&desc->desc_node, &first->tx_list);
- 			}
- 			prev = desc;
- 			total_len += dlen;
-@@ -854,8 +824,6 @@ slave_sg_todev_fill_desc:
- 		ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
- 			DWC_CTLL_FC(DW_DMA_FC_D_P2M);
- 
--		data_width = dw->data_width[dwc->dst_master];
--
- 		for_each_sg(sgl, sg, sg_len, i) {
- 			struct dw_desc	*desc;
- 			u32		len, dlen, mem;
-@@ -863,17 +831,16 @@ slave_sg_todev_fill_desc:
- 			mem = sg_dma_address(sg);
- 			len = sg_dma_len(sg);
- 
--			mem_width = min_t(unsigned int,
--					  data_width, dwc_fast_ffs(mem | len));
-+			mem_width = __ffs(data_width | mem | len);
- 
- slave_sg_fromdev_fill_desc:
- 			desc = dwc_desc_get(dwc);
- 			if (!desc)
- 				goto err_desc_get;
- 
--			desc->lli.sar = reg;
--			desc->lli.dar = mem;
--			desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width);
-+			lli_write(desc, sar, reg);
-+			lli_write(desc, dar, mem);
-+			lli_write(desc, ctllo, ctllo | DWC_CTLL_DST_WIDTH(mem_width));
- 			if ((len >> reg_width) > dwc->block_size) {
- 				dlen = dwc->block_size << reg_width;
- 				mem += dlen;
-@@ -882,15 +849,14 @@ slave_sg_fromdev_fill_desc:
- 				dlen = len;
- 				len = 0;
- 			}
--			desc->lli.ctlhi = dlen >> reg_width;
-+			lli_write(desc, ctlhi, dlen >> reg_width);
- 			desc->len = dlen;
- 
- 			if (!first) {
- 				first = desc;
- 			} else {
--				prev->lli.llp = desc->txd.phys;
--				list_add_tail(&desc->desc_node,
--						&first->tx_list);
-+				lli_write(prev, llp, desc->txd.phys | lms);
-+				list_add_tail(&desc->desc_node, &first->tx_list);
- 			}
- 			prev = desc;
- 			total_len += dlen;
-@@ -905,9 +871,10 @@ slave_sg_fromdev_fill_desc:
- 
- 	if (flags & DMA_PREP_INTERRUPT)
- 		/* Trigger interrupt after last block */
--		prev->lli.ctllo |= DWC_CTLL_INT_EN;
-+		lli_set(prev, ctllo, DWC_CTLL_INT_EN);
- 
- 	prev->lli.llp = 0;
-+	lli_clear(prev, ctllo, DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
- 	first->total_len = total_len;
- 
- 	return &first->txd;
-@@ -932,8 +899,8 @@ bool dw_dma_filter(struct dma_chan *chan
- 	dwc->src_id = dws->src_id;
- 	dwc->dst_id = dws->dst_id;
- 
--	dwc->src_master = dws->src_master;
--	dwc->dst_master = dws->dst_master;
-+	dwc->m_master = dws->m_master;
-+	dwc->p_master = dws->p_master;
- 
- 	return true;
- }
-@@ -986,7 +953,7 @@ static int dwc_pause(struct dma_chan *ch
- 	while (!(channel_readl(dwc, CFG_LO) & DWC_CFGL_FIFO_EMPTY) && count--)
- 		udelay(2);
- 
--	dwc->paused = true;
-+	set_bit(DW_DMA_IS_PAUSED, &dwc->flags);
- 
- 	spin_unlock_irqrestore(&dwc->lock, flags);
- 
-@@ -999,7 +966,7 @@ static inline void dwc_chan_resume(struc
- 
- 	channel_writel(dwc, CFG_LO, cfglo & ~DWC_CFGL_CH_SUSP);
- 
--	dwc->paused = false;
-+	clear_bit(DW_DMA_IS_PAUSED, &dwc->flags);
- }
- 
- static int dwc_resume(struct dma_chan *chan)
-@@ -1007,12 +974,10 @@ static int dwc_resume(struct dma_chan *c
- 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
- 	unsigned long		flags;
- 
--	if (!dwc->paused)
--		return 0;
--
- 	spin_lock_irqsave(&dwc->lock, flags);
- 
--	dwc_chan_resume(dwc);
-+	if (test_bit(DW_DMA_IS_PAUSED, &dwc->flags))
-+		dwc_chan_resume(dwc);
- 
- 	spin_unlock_irqrestore(&dwc->lock, flags);
- 
-@@ -1048,16 +1013,37 @@ static int dwc_terminate_all(struct dma_
- 	return 0;
- }
- 
--static inline u32 dwc_get_residue(struct dw_dma_chan *dwc)
-+static struct dw_desc *dwc_find_desc(struct dw_dma_chan *dwc, dma_cookie_t c)
-+{
-+	struct dw_desc *desc;
-+
-+	list_for_each_entry(desc, &dwc->active_list, desc_node)
-+		if (desc->txd.cookie == c)
-+			return desc;
-+
-+	return NULL;
-+}
-+
-+static u32 dwc_get_residue(struct dw_dma_chan *dwc, dma_cookie_t cookie)
- {
-+	struct dw_desc *desc;
- 	unsigned long flags;
- 	u32 residue;
- 
- 	spin_lock_irqsave(&dwc->lock, flags);
- 
--	residue = dwc->residue;
--	if (test_bit(DW_DMA_IS_SOFT_LLP, &dwc->flags) && residue)
--		residue -= dwc_get_sent(dwc);
-+	desc = dwc_find_desc(dwc, cookie);
-+	if (desc) {
-+		if (desc == dwc_first_active(dwc)) {
-+			residue = desc->residue;
-+			if (test_bit(DW_DMA_IS_SOFT_LLP, &dwc->flags) && residue)
-+				residue -= dwc_get_sent(dwc);
-+		} else {
-+			residue = desc->total_len;
-+		}
-+	} else {
-+		residue = 0;
-+	}
- 
- 	spin_unlock_irqrestore(&dwc->lock, flags);
- 	return residue;
-@@ -1078,10 +1064,12 @@ dwc_tx_status(struct dma_chan *chan,
- 	dwc_scan_descriptors(to_dw_dma(chan->device), dwc);
- 
- 	ret = dma_cookie_status(chan, cookie, txstate);
--	if (ret != DMA_COMPLETE)
--		dma_set_residue(txstate, dwc_get_residue(dwc));
-+	if (ret == DMA_COMPLETE)
-+		return ret;
-+
-+	dma_set_residue(txstate, dwc_get_residue(dwc, cookie));
- 
--	if (dwc->paused && ret == DMA_IN_PROGRESS)
-+	if (test_bit(DW_DMA_IS_PAUSED, &dwc->flags) && ret == DMA_IN_PROGRESS)
- 		return DMA_PAUSED;
- 
- 	return ret;
-@@ -1102,7 +1090,7 @@ static void dwc_issue_pending(struct dma
- 
- static void dw_dma_off(struct dw_dma *dw)
- {
--	int i;
-+	unsigned int i;
- 
- 	dma_writel(dw, CFG, 0);
- 
-@@ -1116,7 +1104,7 @@ static void dw_dma_off(struct dw_dma *dw
- 		cpu_relax();
- 
- 	for (i = 0; i < dw->dma.chancnt; i++)
--		dw->chan[i].initialized = false;
-+		clear_bit(DW_DMA_IS_INITIALIZED, &dw->chan[i].flags);
- }
- 
- static void dw_dma_on(struct dw_dma *dw)
-@@ -1128,9 +1116,6 @@ static int dwc_alloc_chan_resources(stru
- {
- 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
- 	struct dw_dma		*dw = to_dw_dma(chan->device);
--	struct dw_desc		*desc;
--	int			i;
--	unsigned long		flags;
- 
- 	dev_vdbg(chan2dev(chan), "%s\n", __func__);
- 
-@@ -1161,48 +1146,13 @@ static int dwc_alloc_chan_resources(stru
- 		dw_dma_on(dw);
- 	dw->in_use |= dwc->mask;
- 
--	spin_lock_irqsave(&dwc->lock, flags);
--	i = dwc->descs_allocated;
--	while (dwc->descs_allocated < NR_DESCS_PER_CHANNEL) {
--		dma_addr_t phys;
--
--		spin_unlock_irqrestore(&dwc->lock, flags);
--
--		desc = dma_pool_alloc(dw->desc_pool, GFP_ATOMIC, &phys);
--		if (!desc)
--			goto err_desc_alloc;
--
--		memset(desc, 0, sizeof(struct dw_desc));
--
--		INIT_LIST_HEAD(&desc->tx_list);
--		dma_async_tx_descriptor_init(&desc->txd, chan);
--		desc->txd.tx_submit = dwc_tx_submit;
--		desc->txd.flags = DMA_CTRL_ACK;
--		desc->txd.phys = phys;
--
--		dwc_desc_put(dwc, desc);
--
--		spin_lock_irqsave(&dwc->lock, flags);
--		i = ++dwc->descs_allocated;
--	}
--
--	spin_unlock_irqrestore(&dwc->lock, flags);
--
--	dev_dbg(chan2dev(chan), "%s: allocated %d descriptors\n", __func__, i);
--
--	return i;
--
--err_desc_alloc:
--	dev_info(chan2dev(chan), "only allocated %d descriptors\n", i);
--
--	return i;
-+	return 0;
- }
- 
- static void dwc_free_chan_resources(struct dma_chan *chan)
- {
- 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
- 	struct dw_dma		*dw = to_dw_dma(chan->device);
--	struct dw_desc		*desc, *_desc;
- 	unsigned long		flags;
- 	LIST_HEAD(list);
- 
-@@ -1215,17 +1165,15 @@ static void dwc_free_chan_resources(stru
- 	BUG_ON(dma_readl(to_dw_dma(chan->device), CH_EN) & dwc->mask);
- 
- 	spin_lock_irqsave(&dwc->lock, flags);
--	list_splice_init(&dwc->free_list, &list);
--	dwc->descs_allocated = 0;
- 
- 	/* Clear custom channel configuration */
- 	dwc->src_id = 0;
- 	dwc->dst_id = 0;
- 
--	dwc->src_master = 0;
--	dwc->dst_master = 0;
-+	dwc->m_master = 0;
-+	dwc->p_master = 0;
- 
--	dwc->initialized = false;
-+	clear_bit(DW_DMA_IS_INITIALIZED, &dwc->flags);
- 
- 	/* Disable interrupts */
- 	channel_clear_bit(dw, MASK.XFER, dwc->mask);
-@@ -1239,11 +1187,6 @@ static void dwc_free_chan_resources(stru
- 	if (!dw->in_use)
- 		dw_dma_off(dw);
- 
--	list_for_each_entry_safe(desc, _desc, &list, desc_node) {
--		dev_vdbg(chan2dev(chan), "  freeing descriptor %p\n", desc);
--		dma_pool_free(dw->desc_pool, desc, desc->txd.phys);
--	}
--
- 	dev_vdbg(chan2dev(chan), "%s: done\n", __func__);
- }
- 
-@@ -1321,6 +1264,7 @@ struct dw_cyclic_desc *dw_dma_cyclic_pre
- 	struct dw_cyclic_desc		*retval = NULL;
- 	struct dw_desc			*desc;
- 	struct dw_desc			*last = NULL;
-+	u8				lms = DWC_LLP_LMS(dwc->m_master);
- 	unsigned long			was_cyclic;
- 	unsigned int			reg_width;
- 	unsigned int			periods;
-@@ -1374,9 +1318,6 @@ struct dw_cyclic_desc *dw_dma_cyclic_pre
- 
- 	retval = ERR_PTR(-ENOMEM);
- 
--	if (periods > NR_DESCS_PER_CHANNEL)
--		goto out_err;
--
- 	cdesc = kzalloc(sizeof(struct dw_cyclic_desc), GFP_KERNEL);
- 	if (!cdesc)
- 		goto out_err;
-@@ -1392,50 +1333,50 @@ struct dw_cyclic_desc *dw_dma_cyclic_pre
- 
- 		switch (direction) {
- 		case DMA_MEM_TO_DEV:
--			desc->lli.dar = sconfig->dst_addr;
--			desc->lli.sar = buf_addr + (period_len * i);
--			desc->lli.ctllo = (DWC_DEFAULT_CTLLO(chan)
--					| DWC_CTLL_DST_WIDTH(reg_width)
--					| DWC_CTLL_SRC_WIDTH(reg_width)
--					| DWC_CTLL_DST_FIX
--					| DWC_CTLL_SRC_INC
--					| DWC_CTLL_INT_EN);
--
--			desc->lli.ctllo |= sconfig->device_fc ?
--				DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
--				DWC_CTLL_FC(DW_DMA_FC_D_M2P);
-+			lli_write(desc, dar, sconfig->dst_addr);
-+			lli_write(desc, sar, buf_addr + period_len * i);
-+			lli_write(desc, ctllo, (DWC_DEFAULT_CTLLO(chan)
-+				| DWC_CTLL_DST_WIDTH(reg_width)
-+				| DWC_CTLL_SRC_WIDTH(reg_width)
-+				| DWC_CTLL_DST_FIX
-+				| DWC_CTLL_SRC_INC
-+				| DWC_CTLL_INT_EN));
-+
-+			lli_set(desc, ctllo, sconfig->device_fc ?
-+					DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
-+					DWC_CTLL_FC(DW_DMA_FC_D_M2P));
- 
- 			break;
- 		case DMA_DEV_TO_MEM:
--			desc->lli.dar = buf_addr + (period_len * i);
--			desc->lli.sar = sconfig->src_addr;
--			desc->lli.ctllo = (DWC_DEFAULT_CTLLO(chan)
--					| DWC_CTLL_SRC_WIDTH(reg_width)
--					| DWC_CTLL_DST_WIDTH(reg_width)
--					| DWC_CTLL_DST_INC
--					| DWC_CTLL_SRC_FIX
--					| DWC_CTLL_INT_EN);
--
--			desc->lli.ctllo |= sconfig->device_fc ?
--				DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
--				DWC_CTLL_FC(DW_DMA_FC_D_P2M);
-+			lli_write(desc, dar, buf_addr + period_len * i);
-+			lli_write(desc, sar, sconfig->src_addr);
-+			lli_write(desc, ctllo, (DWC_DEFAULT_CTLLO(chan)
-+				| DWC_CTLL_SRC_WIDTH(reg_width)
-+				| DWC_CTLL_DST_WIDTH(reg_width)
-+				| DWC_CTLL_DST_INC
-+				| DWC_CTLL_SRC_FIX
-+				| DWC_CTLL_INT_EN));
-+
-+			lli_set(desc, ctllo, sconfig->device_fc ?
-+					DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
-+					DWC_CTLL_FC(DW_DMA_FC_D_P2M));
- 
- 			break;
- 		default:
- 			break;
- 		}
- 
--		desc->lli.ctlhi = (period_len >> reg_width);
-+		lli_write(desc, ctlhi, period_len >> reg_width);
- 		cdesc->desc[i] = desc;
- 
- 		if (last)
--			last->lli.llp = desc->txd.phys;
-+			lli_write(last, llp, desc->txd.phys | lms);
- 
- 		last = desc;
- 	}
- 
- 	/* Let's make a cyclic list */
--	last->lli.llp = cdesc->desc[0]->txd.phys;
-+	lli_write(last, llp, cdesc->desc[0]->txd.phys | lms);
- 
- 	dev_dbg(chan2dev(&dwc->chan),
- 			"cyclic prepared buf %pad len %zu period %zu periods %d\n",
-@@ -1466,7 +1407,7 @@ void dw_dma_cyclic_free(struct dma_chan
- 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
- 	struct dw_dma		*dw = to_dw_dma(dwc->chan.device);
- 	struct dw_cyclic_desc	*cdesc = dwc->cdesc;
--	int			i;
-+	unsigned int		i;
- 	unsigned long		flags;
- 
- 	dev_dbg(chan2dev(&dwc->chan), "%s\n", __func__);
-@@ -1490,32 +1431,38 @@ void dw_dma_cyclic_free(struct dma_chan
- 	kfree(cdesc->desc);
- 	kfree(cdesc);
- 
-+	dwc->cdesc = NULL;
-+
- 	clear_bit(DW_DMA_IS_CYCLIC, &dwc->flags);
- }
- EXPORT_SYMBOL(dw_dma_cyclic_free);
- 
- /*----------------------------------------------------------------------*/
- 
--int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
-+int dw_dma_probe(struct dw_dma_chip *chip)
- {
-+	struct dw_dma_platform_data *pdata;
- 	struct dw_dma		*dw;
- 	bool			autocfg = false;
- 	unsigned int		dw_params;
--	unsigned int		max_blk_size = 0;
-+	unsigned int		i;
- 	int			err;
--	int			i;
- 
- 	dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL);
- 	if (!dw)
- 		return -ENOMEM;
- 
-+	dw->pdata = devm_kzalloc(chip->dev, sizeof(*dw->pdata), GFP_KERNEL);
-+	if (!dw->pdata)
-+		return -ENOMEM;
-+
- 	dw->regs = chip->regs;
- 	chip->dw = dw;
- 
- 	pm_runtime_get_sync(chip->dev);
- 
--	if (!pdata) {
--		dw_params = dma_read_byaddr(chip->regs, DW_PARAMS);
-+	if (!chip->pdata) {
-+		dw_params = dma_readl(dw, DW_PARAMS);
- 		dev_dbg(chip->dev, "DW_PARAMS: 0x%08x\n", dw_params);
- 
- 		autocfg = dw_params >> DW_PARAMS_EN & 1;
-@@ -1524,29 +1471,31 @@ int dw_dma_probe(struct dw_dma_chip *chi
- 			goto err_pdata;
- 		}
- 
--		pdata = devm_kzalloc(chip->dev, sizeof(*pdata), GFP_KERNEL);
--		if (!pdata) {
--			err = -ENOMEM;
--			goto err_pdata;
--		}
-+		/* Reassign the platform data pointer */
-+		pdata = dw->pdata;
- 
- 		/* Get hardware configuration parameters */
- 		pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN & 7) + 1;
- 		pdata->nr_masters = (dw_params >> DW_PARAMS_NR_MASTER & 3) + 1;
- 		for (i = 0; i < pdata->nr_masters; i++) {
- 			pdata->data_width[i] =
--				(dw_params >> DW_PARAMS_DATA_WIDTH(i) & 3) + 2;
-+				4 << (dw_params >> DW_PARAMS_DATA_WIDTH(i) & 3);
- 		}
--		max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
-+		pdata->block_size = dma_readl(dw, MAX_BLK_SIZE);
- 
- 		/* Fill platform data with the default values */
- 		pdata->is_private = true;
- 		pdata->is_memcpy = true;
- 		pdata->chan_allocation_order = CHAN_ALLOCATION_ASCENDING;
- 		pdata->chan_priority = CHAN_PRIORITY_ASCENDING;
--	} else if (pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS) {
-+	} else if (chip->pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS) {
- 		err = -EINVAL;
- 		goto err_pdata;
-+	} else {
-+		memcpy(dw->pdata, chip->pdata, sizeof(*dw->pdata));
-+
-+		/* Reassign the platform data pointer */
-+		pdata = dw->pdata;
- 	}
- 
- 	dw->chan = devm_kcalloc(chip->dev, pdata->nr_channels, sizeof(*dw->chan),
-@@ -1556,11 +1505,6 @@ int dw_dma_probe(struct dw_dma_chip *chi
- 		goto err_pdata;
- 	}
- 
--	/* Get hardware configuration parameters */
--	dw->nr_masters = pdata->nr_masters;
--	for (i = 0; i < dw->nr_masters; i++)
--		dw->data_width[i] = pdata->data_width[i];
--
- 	/* Calculate all channel mask before DMA setup */
- 	dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
- 
-@@ -1607,7 +1551,6 @@ int dw_dma_probe(struct dw_dma_chip *chi
- 
- 		INIT_LIST_HEAD(&dwc->active_list);
- 		INIT_LIST_HEAD(&dwc->queue);
--		INIT_LIST_HEAD(&dwc->free_list);
- 
- 		channel_clear_bit(dw, CH_EN, dwc->mask);
- 
-@@ -1615,11 +1558,9 @@ int dw_dma_probe(struct dw_dma_chip *chi
- 
- 		/* Hardware configuration */
- 		if (autocfg) {
--			unsigned int dwc_params;
- 			unsigned int r = DW_DMA_MAX_NR_CHANNELS - i - 1;
--			void __iomem *addr = chip->regs + r * sizeof(u32);
--
--			dwc_params = dma_read_byaddr(addr, DWC_PARAMS);
-+			void __iomem *addr = &__dw_regs(dw)->DWC_PARAMS[r];
-+			unsigned int dwc_params = dma_readl_native(addr);
- 
- 			dev_dbg(chip->dev, "DWC_PARAMS[%d]: 0x%08x\n", i,
- 					   dwc_params);
-@@ -1630,16 +1571,15 @@ int dw_dma_probe(struct dw_dma_chip *chi
- 			 * up to 0x0a for 4095.
- 			 */
- 			dwc->block_size =
--				(4 << ((max_blk_size >> 4 * i) & 0xf)) - 1;
-+				(4 << ((pdata->block_size >> 4 * i) & 0xf)) - 1;
- 			dwc->nollp =
- 				(dwc_params >> DWC_PARAMS_MBLK_EN & 0x1) == 0;
- 		} else {
- 			dwc->block_size = pdata->block_size;
- 
- 			/* Check if channel supports multi block transfer */
--			channel_writel(dwc, LLP, 0xfffffffc);
--			dwc->nollp =
--				(channel_readl(dwc, LLP) & 0xfffffffc) == 0;
-+			channel_writel(dwc, LLP, DWC_LLP_LOC(0xffffffff));
-+			dwc->nollp = DWC_LLP_LOC(channel_readl(dwc, LLP)) == 0;
- 			channel_writel(dwc, LLP, 0);
- 		}
- 	}
---- a/drivers/dma/dw/pci.c
-+++ b/drivers/dma/dw/pci.c
-@@ -17,8 +17,8 @@
- 
- static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
- {
-+	const struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
- 	struct dw_dma_chip *chip;
--	struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
- 	int ret;
- 
- 	ret = pcim_enable_device(pdev);
-@@ -49,8 +49,9 @@ static int dw_pci_probe(struct pci_dev *
- 	chip->dev = &pdev->dev;
- 	chip->regs = pcim_iomap_table(pdev)[0];
- 	chip->irq = pdev->irq;
-+	chip->pdata = pdata;
- 
--	ret = dw_dma_probe(chip, pdata);
-+	ret = dw_dma_probe(chip);
- 	if (ret)
- 		return ret;
- 
-@@ -108,6 +109,10 @@ static const struct pci_device_id dw_pci
- 
- 	/* Haswell */
- 	{ PCI_VDEVICE(INTEL, 0x9c60) },
-+
-+	/* Broadwell */
-+	{ PCI_VDEVICE(INTEL, 0x9ce0) },
-+
- 	{ }
- };
- MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
---- a/drivers/dma/dw/platform.c
-+++ b/drivers/dma/dw/platform.c
-@@ -42,13 +42,13 @@ static struct dma_chan *dw_dma_of_xlate(
- 
- 	slave.src_id = dma_spec->args[0];
- 	slave.dst_id = dma_spec->args[0];
--	slave.src_master = dma_spec->args[1];
--	slave.dst_master = dma_spec->args[2];
-+	slave.m_master = dma_spec->args[1];
-+	slave.p_master = dma_spec->args[2];
- 
- 	if (WARN_ON(slave.src_id >= DW_DMA_MAX_NR_REQUESTS ||
- 		    slave.dst_id >= DW_DMA_MAX_NR_REQUESTS ||
--		    slave.src_master >= dw->nr_masters ||
--		    slave.dst_master >= dw->nr_masters))
-+		    slave.m_master >= dw->pdata->nr_masters ||
-+		    slave.p_master >= dw->pdata->nr_masters))
- 		return NULL;
- 
- 	dma_cap_zero(cap);
-@@ -66,8 +66,8 @@ static bool dw_dma_acpi_filter(struct dm
- 		.dma_dev = dma_spec->dev,
- 		.src_id = dma_spec->slave_id,
- 		.dst_id = dma_spec->slave_id,
--		.src_master = 1,
--		.dst_master = 0,
-+		.m_master = 0,
-+		.p_master = 1,
- 	};
- 
- 	return dw_dma_filter(chan, &slave);
-@@ -103,18 +103,28 @@ dw_dma_parse_dt(struct platform_device *
- 	struct device_node *np = pdev->dev.of_node;
- 	struct dw_dma_platform_data *pdata;
- 	u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
-+	u32 nr_masters;
-+	u32 nr_channels;
- 
- 	if (!np) {
- 		dev_err(&pdev->dev, "Missing DT data\n");
- 		return NULL;
- 	}
- 
-+	if (of_property_read_u32(np, "dma-masters", &nr_masters))
-+		return NULL;
-+	if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS)
-+		return NULL;
-+
-+	if (of_property_read_u32(np, "dma-channels", &nr_channels))
-+		return NULL;
-+
- 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- 	if (!pdata)
- 		return NULL;
- 
--	if (of_property_read_u32(np, "dma-channels", &pdata->nr_channels))
--		return NULL;
-+	pdata->nr_masters = nr_masters;
-+	pdata->nr_channels = nr_channels;
- 
- 	if (of_property_read_bool(np, "is_private"))
- 		pdata->is_private = true;
-@@ -128,17 +138,13 @@ dw_dma_parse_dt(struct platform_device *
- 	if (!of_property_read_u32(np, "block_size", &tmp))
- 		pdata->block_size = tmp;
- 
--	if (!of_property_read_u32(np, "dma-masters", &tmp)) {
--		if (tmp > DW_DMA_MAX_NR_MASTERS)
--			return NULL;
--
--		pdata->nr_masters = tmp;
--	}
--
--	if (!of_property_read_u32_array(np, "data_width", arr,
--				pdata->nr_masters))
--		for (tmp = 0; tmp < pdata->nr_masters; tmp++)
-+	if (!of_property_read_u32_array(np, "data-width", arr, nr_masters)) {
-+		for (tmp = 0; tmp < nr_masters; tmp++)
- 			pdata->data_width[tmp] = arr[tmp];
-+	} else if (!of_property_read_u32_array(np, "data_width", arr, nr_masters)) {
-+		for (tmp = 0; tmp < nr_masters; tmp++)
-+			pdata->data_width[tmp] = BIT(arr[tmp] & 0x07);
-+	}
- 
- 	return pdata;
- }
-@@ -155,8 +161,7 @@ static int dw_probe(struct platform_devi
- 	struct dw_dma_chip *chip;
- 	struct device *dev = &pdev->dev;
- 	struct resource *mem;
--	const struct acpi_device_id *id;
--	struct dw_dma_platform_data *pdata;
-+	const struct dw_dma_platform_data *pdata;
- 	int err;
- 
- 	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
-@@ -179,13 +184,9 @@ static int dw_probe(struct platform_devi
- 	pdata = dev_get_platdata(dev);
- 	if (!pdata)
- 		pdata = dw_dma_parse_dt(pdev);
--	if (!pdata && has_acpi_companion(dev)) {
--		id = acpi_match_device(dev->driver->acpi_match_table, dev);
--		if (id)
--			pdata = (struct dw_dma_platform_data *)id->driver_data;
--	}
- 
- 	chip->dev = dev;
-+	chip->pdata = pdata;
- 
- 	chip->clk = devm_clk_get(chip->dev, "hclk");
- 	if (IS_ERR(chip->clk))
-@@ -196,7 +197,7 @@ static int dw_probe(struct platform_devi
- 
- 	pm_runtime_enable(&pdev->dev);
- 
--	err = dw_dma_probe(chip, pdata);
-+	err = dw_dma_probe(chip);
- 	if (err)
- 		goto err_dw_dma_probe;
- 
-@@ -239,7 +240,19 @@ static void dw_shutdown(struct platform_
- {
- 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
- 
-+	/*
-+	 * We have to call dw_dma_disable() to stop any ongoing transfer. On
-+	 * some platforms we can't do that since DMA device is powered off.
-+	 * Moreover we have no possibility to check if the platform is affected
-+	 * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put()
-+	 * unconditionally. On the other hand we can't use
-+	 * pm_runtime_suspended() because runtime PM framework is not fully
-+	 * used by the driver.
-+	 */
-+	pm_runtime_get_sync(chip->dev);
- 	dw_dma_disable(chip);
-+	pm_runtime_put_sync_suspend(chip->dev);
-+
- 	clk_disable_unprepare(chip->clk);
- }
- 
-@@ -252,17 +265,8 @@ MODULE_DEVICE_TABLE(of, dw_dma_of_id_tab
- #endif
- 
- #ifdef CONFIG_ACPI
--static struct dw_dma_platform_data dw_dma_acpi_pdata = {
--	.nr_channels = 8,
--	.is_private = true,
--	.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
--	.chan_priority = CHAN_PRIORITY_ASCENDING,
--	.block_size = 4095,
--	.nr_masters = 2,
--};
--
- static const struct acpi_device_id dw_dma_acpi_id_table[] = {
--	{ "INTL9C60", (kernel_ulong_t)&dw_dma_acpi_pdata },
-+	{ "INTL9C60", 0 },
- 	{ }
- };
- MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table);
---- a/drivers/dma/dw/regs.h
-+++ b/drivers/dma/dw/regs.h
-@@ -114,10 +114,6 @@ struct dw_dma_regs {
- #define dma_writel_native writel
- #endif
- 
--/* To access the registers in early stage of probe */
--#define dma_read_byaddr(addr, name) \
--	dma_readl_native((addr) + offsetof(struct dw_dma_regs, name))
--
- /* Bitfields in DW_PARAMS */
- #define DW_PARAMS_NR_CHAN	8		/* number of channels */
- #define DW_PARAMS_NR_MASTER	11		/* number of AHB masters */
-@@ -143,6 +139,10 @@ enum dw_dma_msize {
- 	DW_DMA_MSIZE_256,
- };
- 
-+/* Bitfields in LLP */
-+#define DWC_LLP_LMS(x)		((x) & 3)	/* list master select */
-+#define DWC_LLP_LOC(x)		((x) & ~3)	/* next lli */
-+
- /* Bitfields in CTL_LO */
- #define DWC_CTLL_INT_EN		(1 << 0)	/* irqs enabled? */
- #define DWC_CTLL_DST_WIDTH(n)	((n)<<1)	/* bytes per element */
-@@ -150,7 +150,7 @@ enum dw_dma_msize {
- #define DWC_CTLL_DST_INC	(0<<7)		/* DAR update/not */
- #define DWC_CTLL_DST_DEC	(1<<7)
- #define DWC_CTLL_DST_FIX	(2<<7)
--#define DWC_CTLL_SRC_INC	(0<<7)		/* SAR update/not */
-+#define DWC_CTLL_SRC_INC	(0<<9)		/* SAR update/not */
- #define DWC_CTLL_SRC_DEC	(1<<9)
- #define DWC_CTLL_SRC_FIX	(2<<9)
- #define DWC_CTLL_DST_MSIZE(n)	((n)<<11)	/* burst, #elements */
-@@ -216,6 +216,8 @@ enum dw_dma_msize {
- enum dw_dmac_flags {
- 	DW_DMA_IS_CYCLIC = 0,
- 	DW_DMA_IS_SOFT_LLP = 1,
-+	DW_DMA_IS_PAUSED = 2,
-+	DW_DMA_IS_INITIALIZED = 3,
- };
- 
- struct dw_dma_chan {
-@@ -224,8 +226,6 @@ struct dw_dma_chan {
- 	u8				mask;
- 	u8				priority;
- 	enum dma_transfer_direction	direction;
--	bool				paused;
--	bool				initialized;
- 
- 	/* software emulation of the LLP transfers */
- 	struct list_head	*tx_node_active;
-@@ -236,8 +236,6 @@ struct dw_dma_chan {
- 	unsigned long		flags;
- 	struct list_head	active_list;
- 	struct list_head	queue;
--	struct list_head	free_list;
--	u32			residue;
- 	struct dw_cyclic_desc	*cdesc;
- 
- 	unsigned int		descs_allocated;
-@@ -249,8 +247,8 @@ struct dw_dma_chan {
- 	/* custom slave configuration */
- 	u8			src_id;
- 	u8			dst_id;
--	u8			src_master;
--	u8			dst_master;
-+	u8			m_master;
-+	u8			p_master;
- 
- 	/* configuration passed via .device_config */
- 	struct dma_slave_config dma_sconfig;
-@@ -283,9 +281,8 @@ struct dw_dma {
- 	u8			all_chan_mask;
- 	u8			in_use;
- 
--	/* hardware configuration */
--	unsigned char		nr_masters;
--	unsigned char		data_width[DW_DMA_MAX_NR_MASTERS];
-+	/* platform data */
-+	struct dw_dma_platform_data	*pdata;
- };
- 
- static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
-@@ -308,32 +305,51 @@ static inline struct dw_dma *to_dw_dma(s
- 	return container_of(ddev, struct dw_dma, dma);
- }
- 
-+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-+typedef __be32 __dw32;
-+#else
-+typedef __le32 __dw32;
-+#endif
-+
- /* LLI == Linked List Item; a.k.a. DMA block descriptor */
- struct dw_lli {
- 	/* values that are not changed by hardware */
--	u32		sar;
--	u32		dar;
--	u32		llp;		/* chain to next lli */
--	u32		ctllo;
-+	__dw32		sar;
-+	__dw32		dar;
-+	__dw32		llp;		/* chain to next lli */
-+	__dw32		ctllo;
- 	/* values that may get written back: */
--	u32		ctlhi;
-+	__dw32		ctlhi;
- 	/* sstat and dstat can snapshot peripheral register state.
- 	 * silicon config may discard either or both...
- 	 */
--	u32		sstat;
--	u32		dstat;
-+	__dw32		sstat;
-+	__dw32		dstat;
- };
- 
- struct dw_desc {
- 	/* FIRST values the hardware uses */
- 	struct dw_lli			lli;
- 
-+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-+#define lli_set(d, reg, v)		((d)->lli.reg |= cpu_to_be32(v))
-+#define lli_clear(d, reg, v)		((d)->lli.reg &= ~cpu_to_be32(v))
-+#define lli_read(d, reg)		be32_to_cpu((d)->lli.reg)
-+#define lli_write(d, reg, v)		((d)->lli.reg = cpu_to_be32(v))
-+#else
-+#define lli_set(d, reg, v)		((d)->lli.reg |= cpu_to_le32(v))
-+#define lli_clear(d, reg, v)		((d)->lli.reg &= ~cpu_to_le32(v))
-+#define lli_read(d, reg)		le32_to_cpu((d)->lli.reg)
-+#define lli_write(d, reg, v)		((d)->lli.reg = cpu_to_le32(v))
-+#endif
-+
- 	/* THEN values for driver housekeeping */
- 	struct list_head		desc_node;
- 	struct list_head		tx_list;
- 	struct dma_async_tx_descriptor	txd;
- 	size_t				len;
- 	size_t				total_len;
-+	u32				residue;
- };
- 
- #define to_dw_desc(h)	list_entry(h, struct dw_desc, desc_node)
---- a/include/linux/dma/dw.h
-+++ b/include/linux/dma/dw.h
-@@ -27,6 +27,7 @@ struct dw_dma;
-  * @regs:		memory mapped I/O space
-  * @clk:		hclk clock
-  * @dw:			struct dw_dma that is filed by dw_dma_probe()
-+ * @pdata:		pointer to platform data
-  */
- struct dw_dma_chip {
- 	struct device	*dev;
-@@ -34,10 +35,12 @@ struct dw_dma_chip {
- 	void __iomem	*regs;
- 	struct clk	*clk;
- 	struct dw_dma	*dw;
-+
-+	const struct dw_dma_platform_data	*pdata;
- };
- 
- /* Export to the platform drivers */
--int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata);
-+int dw_dma_probe(struct dw_dma_chip *chip);
- int dw_dma_remove(struct dw_dma_chip *chip);
- 
- /* DMA API extensions */
---- a/include/linux/platform_data/dma-dw.h
-+++ b/include/linux/platform_data/dma-dw.h
-@@ -21,15 +21,15 @@
-  * @dma_dev:	required DMA master device
-  * @src_id:	src request line
-  * @dst_id:	dst request line
-- * @src_master: src master for transfers on allocated channel.
-- * @dst_master: dest master for transfers on allocated channel.
-+ * @m_master:	memory master for transfers on allocated channel
-+ * @p_master:	peripheral master for transfers on allocated channel
-  */
- struct dw_dma_slave {
- 	struct device		*dma_dev;
- 	u8			src_id;
- 	u8			dst_id;
--	u8			src_master;
--	u8			dst_master;
-+	u8			m_master;
-+	u8			p_master;
- };
- 
- /**
-@@ -43,7 +43,7 @@ struct dw_dma_slave {
-  * @block_size: Maximum block size supported by the controller
-  * @nr_masters: Number of AHB masters supported by the controller
-  * @data_width: Maximum data width supported by hardware per AHB master
-- *		(0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
-+ *		(in bytes, power of 2)
-  */
- struct dw_dma_platform_data {
- 	unsigned int	nr_channels;
-@@ -55,7 +55,7 @@ struct dw_dma_platform_data {
- #define CHAN_PRIORITY_ASCENDING		0	/* chan0 highest */
- #define CHAN_PRIORITY_DESCENDING	1	/* chan7 highest */
- 	unsigned char	chan_priority;
--	unsigned short	block_size;
-+	unsigned int	block_size;
- 	unsigned char	nr_masters;
- 	unsigned char	data_width[DW_DMA_MAX_NR_MASTERS];
- };
diff --git a/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch b/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch
deleted file mode 100644
index 1a6ce05624..0000000000
--- a/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch
+++ /dev/null
@@ -1,1083 +0,0 @@
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Date: Sat, 21 May 2016 22:46:32 +0200
-Subject:  [PATCH v2 00/23] ata: sata_dwc_460ex: make it working again
-
-The last approach in the commit 8b3444852a2b ("sata_dwc_460ex: move to generic
-DMA driver") to switch to generic DMA engine API wasn't tested on bare metal.
-Besides that we expecting new board support coming with the same SATA IP but
-with different DMA.
-
-This series is targetting the following things:
-- a few bug fixes to the original driver
-- a part to fix the DMA engine usage and in particularly dw_dmac driver
-- move driver to use generic PHY and "dmas" property which leads to update in DTS
-
-The driver has been tested myself on Sam460ex and WD MyBookLive (apollo3g)
-boards. In any case I ask Christian, Måns, and Julian to independently test and
-provide Tested-by tag or an error report.
-
-Series depends on previously published but not yet fully applied series [1].
-
-The patches are also available via public branch [2].
-
-[1] http://www.spinics.net/lists/dmaengine/msg09250.html
-[2] https://bitbucket.org/andy-shev/linux/branch/topic%2Fdw%2Fsata
-
-Since v1:
-- simplify patch 8 (David Laight)
-- add Tested-by and Acked-by tags
-
-Andy Shevchenko (11):
-  ata: sata_dwc_460ex: set dma_boundary to 0x1fff
-  ata: sata_dwc_460ex: burst size must be in items not bytes
-  ata: sata_dwc_460ex: DMA is always a flow controller
-  ata: sata_dwc_460ex: select only core part of DMA driver
-  ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
-  ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
-  ata: sata_dwc_460ex: supply physical address of FIFO to DMA
-  ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
-  ata: sata_dwc_460ex: use devm_ioremap
-  ata: sata_dwc_460ex: make debug messages neat
-  powerpc/4xx: Device tree update for the 460ex DWC SATA
-
-Christian Lamparter (1):
-  ata: sata_dwc_460ex: fix crash on offline links without an attached
-    drive
-
-Mans Rullgard (11):
-  ata: sata_dwc_460ex: remove incorrect locking
-  ata: sata_dwc_460ex: skip dma setup for non-dma commands
-  ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
-  ata: sata_dwc_460ex: add phy support
-  ata: sata_dwc_460ex: get rid of global data
-  ata: sata_dwc_460ex: remove empty libata callback
-  ata: sata_dwc_460ex: get rid of some pointless casts
-  ata: sata_dwc_460ex: get rid of incorrect cast
-  ata: sata_dwc_460ex: add __iomem to register base pointer
-  ata: sata_dwc_460ex: use readl/writel_relaxed()
-  ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
-
- arch/powerpc/boot/dts/canyonlands.dts |  15 +-
- drivers/ata/Kconfig                   |  12 +-
- drivers/ata/sata_dwc_460ex.c          | 552 +++++++++++++++++-----------------
- 3 files changed, 305 insertions(+), 274 deletions(-)
-
----
- drivers/ata/sata_dwc_460ex.c | 552 ++++++++++++++++++++++---------------------
- 1 file changed, 283 insertions(+), 269 deletions(-)
-
---- a/drivers/ata/sata_dwc_460ex.c
-+++ b/drivers/ata/sata_dwc_460ex.c
-@@ -30,10 +30,12 @@
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/device.h>
-+#include <linux/dmaengine.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
- #include <linux/of_platform.h>
- #include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
- #include <linux/libata.h>
- #include <linux/slab.h>
- 
-@@ -42,10 +44,6 @@
- #include <scsi/scsi_host.h>
- #include <scsi/scsi_cmnd.h>
- 
--/* Supported DMA engine drivers */
--#include <linux/platform_data/dma-dw.h>
--#include <linux/dma/dw.h>
--
- /* These two are defined in "libata.h" */
- #undef	DRV_NAME
- #undef	DRV_VERSION
-@@ -53,19 +51,14 @@
- #define DRV_NAME        "sata-dwc"
- #define DRV_VERSION     "1.3"
- 
--#ifndef out_le32
--#define out_le32(a, v)	__raw_writel(__cpu_to_le32(v), (void __iomem *)(a))
--#endif
--
--#ifndef in_le32
--#define in_le32(a)	__le32_to_cpu(__raw_readl((void __iomem *)(a)))
--#endif
-+#define sata_dwc_writel(a, v)	writel_relaxed(v, a)
-+#define sata_dwc_readl(a)	readl_relaxed(a)
- 
- #ifndef NO_IRQ
- #define NO_IRQ		0
- #endif
- 
--#define AHB_DMA_BRST_DFLT	64	/* 16 data items burst length*/
-+#define AHB_DMA_BRST_DFLT	64	/* 16 data items burst length */
- 
- enum {
- 	SATA_DWC_MAX_PORTS = 1,
-@@ -102,7 +95,7 @@ struct sata_dwc_regs {
- 	u32 versionr;		/* Version Register */
- 	u32 idr;		/* ID Register */
- 	u32 unimpl[192];	/* Unimplemented */
--	u32 dmadr[256];	/* FIFO Locations in DMA Mode */
-+	u32 dmadr[256];		/* FIFO Locations in DMA Mode */
- };
- 
- enum {
-@@ -146,9 +139,14 @@ struct sata_dwc_device {
- 	struct device		*dev;		/* generic device struct */
- 	struct ata_probe_ent	*pe;		/* ptr to probe-ent */
- 	struct ata_host		*host;
--	u8 __iomem		*reg_base;
--	struct sata_dwc_regs	*sata_dwc_regs;	/* DW Synopsys SATA specific */
-+	struct sata_dwc_regs __iomem *sata_dwc_regs;	/* DW SATA specific */
-+	u32			sactive_issued;
-+	u32			sactive_queued;
-+	struct phy		*phy;
-+	phys_addr_t		dmadr;
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
- 	struct dw_dma_chip	*dma;
-+#endif
- };
- 
- #define SATA_DWC_QCMD_MAX	32
-@@ -159,25 +157,19 @@ struct sata_dwc_device_port {
- 	int			dma_pending[SATA_DWC_QCMD_MAX];
- 
- 	/* DMA info */
--	struct dw_dma_slave		*dws;
- 	struct dma_chan			*chan;
- 	struct dma_async_tx_descriptor	*desc[SATA_DWC_QCMD_MAX];
- 	u32				dma_interrupt_count;
- };
- 
- /*
-- * Commonly used DWC SATA driver Macros
-+ * Commonly used DWC SATA driver macros
-  */
--#define HSDEV_FROM_HOST(host)  ((struct sata_dwc_device *)\
--					(host)->private_data)
--#define HSDEV_FROM_AP(ap)  ((struct sata_dwc_device *)\
--					(ap)->host->private_data)
--#define HSDEVP_FROM_AP(ap)   ((struct sata_dwc_device_port *)\
--					(ap)->private_data)
--#define HSDEV_FROM_QC(qc)	((struct sata_dwc_device *)\
--					(qc)->ap->host->private_data)
--#define HSDEV_FROM_HSDEVP(p)	((struct sata_dwc_device *)\
--						(hsdevp)->hsdev)
-+#define HSDEV_FROM_HOST(host)	((struct sata_dwc_device *)(host)->private_data)
-+#define HSDEV_FROM_AP(ap)	((struct sata_dwc_device *)(ap)->host->private_data)
-+#define HSDEVP_FROM_AP(ap)	((struct sata_dwc_device_port *)(ap)->private_data)
-+#define HSDEV_FROM_QC(qc)	((struct sata_dwc_device *)(qc)->ap->host->private_data)
-+#define HSDEV_FROM_HSDEVP(p)	((struct sata_dwc_device *)(p)->hsdev)
- 
- enum {
- 	SATA_DWC_CMD_ISSUED_NOT		= 0,
-@@ -190,21 +182,6 @@ enum {
- 	SATA_DWC_DMA_PENDING_RX		= 2,
- };
- 
--struct sata_dwc_host_priv {
--	void	__iomem	 *scr_addr_sstatus;
--	u32	sata_dwc_sactive_issued ;
--	u32	sata_dwc_sactive_queued ;
--};
--
--static struct sata_dwc_host_priv host_pvt;
--
--static struct dw_dma_slave sata_dwc_dma_dws = {
--	.src_id = 0,
--	.dst_id = 0,
--	.src_master = 0,
--	.dst_master = 1,
--};
--
- /*
-  * Prototypes
-  */
-@@ -215,6 +192,93 @@ static void sata_dwc_dma_xfer_complete(s
- static void sata_dwc_port_stop(struct ata_port *ap);
- static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
- 
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
-+
-+#include <linux/platform_data/dma-dw.h>
-+#include <linux/dma/dw.h>
-+
-+static struct dw_dma_slave sata_dwc_dma_dws = {
-+	.src_id = 0,
-+	.dst_id = 0,
-+	.m_master = 1,
-+	.p_master = 0,
-+};
-+
-+static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
-+{
-+	struct dw_dma_slave *dws = &sata_dwc_dma_dws;
-+
-+	if (dws->dma_dev != chan->device->dev)
-+		return false;
-+
-+	chan->private = dws;
-+	return true;
-+}
-+
-+static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
-+{
-+	struct sata_dwc_device *hsdev = hsdevp->hsdev;
-+	struct dw_dma_slave *dws = &sata_dwc_dma_dws;
-+	dma_cap_mask_t mask;
-+
-+	dws->dma_dev = hsdev->dev;
-+
-+	dma_cap_zero(mask);
-+	dma_cap_set(DMA_SLAVE, mask);
-+
-+	/* Acquire DMA channel */
-+	hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
-+	if (!hsdevp->chan) {
-+		dev_err(hsdev->dev, "%s: dma channel unavailable\n",
-+			 __func__);
-+		return -EAGAIN;
-+	}
-+
-+	return 0;
-+}
-+
-+static int sata_dwc_dma_init_old(struct platform_device *pdev,
-+				 struct sata_dwc_device *hsdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct resource *res;
-+
-+	hsdev->dma = devm_kzalloc(&pdev->dev, sizeof(*hsdev->dma), GFP_KERNEL);
-+	if (!hsdev->dma)
-+		return -ENOMEM;
-+
-+	hsdev->dma->dev = &pdev->dev;
-+
-+	/* Get SATA DMA interrupt number */
-+	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
-+	if (hsdev->dma->irq == NO_IRQ) {
-+		dev_err(&pdev->dev, "no SATA DMA irq\n");
-+		return -ENODEV;
-+	}
-+
-+	/* Get physical SATA DMA register base address */
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	hsdev->dma->regs = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(hsdev->dma->regs)) {
-+		dev_err(&pdev->dev,
-+			"ioremap failed for AHBDMA register address\n");
-+		return PTR_ERR(hsdev->dma->regs);
-+	}
-+
-+	/* Initialize AHB DMAC */
-+	return dw_dma_probe(hsdev->dma);
-+}
-+
-+static void sata_dwc_dma_exit_old(struct sata_dwc_device *hsdev)
-+{
-+	if (!hsdev->dma)
-+		return;
-+
-+	dw_dma_remove(hsdev->dma);
-+}
-+
-+#endif
-+
- static const char *get_prot_descript(u8 protocol)
- {
- 	switch ((enum ata_tf_protocols)protocol) {
-@@ -305,21 +369,20 @@ static struct dma_async_tx_descriptor *d
- 	struct ata_port *ap = qc->ap;
- 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
- 	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
--	dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr;
- 	struct dma_slave_config sconf;
- 	struct dma_async_tx_descriptor *desc;
- 
- 	if (qc->dma_dir == DMA_DEV_TO_MEM) {
--		sconf.src_addr = addr;
--		sconf.device_fc = true;
-+		sconf.src_addr = hsdev->dmadr;
-+		sconf.device_fc = false;
- 	} else {	/* DMA_MEM_TO_DEV */
--		sconf.dst_addr = addr;
-+		sconf.dst_addr = hsdev->dmadr;
- 		sconf.device_fc = false;
- 	}
- 
- 	sconf.direction = qc->dma_dir;
--	sconf.src_maxburst = AHB_DMA_BRST_DFLT;
--	sconf.dst_maxburst = AHB_DMA_BRST_DFLT;
-+	sconf.src_maxburst = AHB_DMA_BRST_DFLT / 4;	/* in items */
-+	sconf.dst_maxburst = AHB_DMA_BRST_DFLT / 4;	/* in items */
- 	sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- 	sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- 
-@@ -336,8 +399,8 @@ static struct dma_async_tx_descriptor *d
- 	desc->callback = dma_dwc_xfer_done;
- 	desc->callback_param = hsdev;
- 
--	dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pad\n",
--		__func__, qc->sg, qc->n_elem, &addr);
-+	dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pa\n", __func__,
-+		qc->sg, qc->n_elem, &hsdev->dmadr);
- 
- 	return desc;
- }
-@@ -350,48 +413,38 @@ static int sata_dwc_scr_read(struct ata_
- 		return -EINVAL;
- 	}
- 
--	*val = in_le32(link->ap->ioaddr.scr_addr + (scr * 4));
--	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
--		__func__, link->ap->print_id, scr, *val);
-+	*val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4));
-+	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
-+		link->ap->print_id, scr, *val);
- 
- 	return 0;
- }
- 
- static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
- {
--	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
--		__func__, link->ap->print_id, scr, val);
-+	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
-+		link->ap->print_id, scr, val);
- 	if (scr > SCR_NOTIFICATION) {
- 		dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
- 			 __func__, scr);
- 		return -EINVAL;
- 	}
--	out_le32(link->ap->ioaddr.scr_addr + (scr * 4), val);
-+	sata_dwc_writel(link->ap->ioaddr.scr_addr + (scr * 4), val);
- 
- 	return 0;
- }
- 
--static u32 core_scr_read(unsigned int scr)
--{
--	return in_le32(host_pvt.scr_addr_sstatus + (scr * 4));
--}
--
--static void core_scr_write(unsigned int scr, u32 val)
--{
--	out_le32(host_pvt.scr_addr_sstatus + (scr * 4), val);
--}
--
--static void clear_serror(void)
-+static void clear_serror(struct ata_port *ap)
- {
- 	u32 val;
--	val = core_scr_read(SCR_ERROR);
--	core_scr_write(SCR_ERROR, val);
-+	sata_dwc_scr_read(&ap->link, SCR_ERROR, &val);
-+	sata_dwc_scr_write(&ap->link, SCR_ERROR, val);
- }
- 
- static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
- {
--	out_le32(&hsdev->sata_dwc_regs->intpr,
--		 in_le32(&hsdev->sata_dwc_regs->intpr));
-+	sata_dwc_writel(&hsdev->sata_dwc_regs->intpr,
-+			sata_dwc_readl(&hsdev->sata_dwc_regs->intpr));
- }
- 
- static u32 qcmd_tag_to_mask(u8 tag)
-@@ -412,7 +465,7 @@ static void sata_dwc_error_intr(struct a
- 
- 	ata_ehi_clear_desc(ehi);
- 
--	serror = core_scr_read(SCR_ERROR);
-+	sata_dwc_scr_read(&ap->link, SCR_ERROR, &serror);
- 	status = ap->ops->sff_check_status(ap);
- 
- 	tag = ap->link.active_tag;
-@@ -423,7 +476,7 @@ static void sata_dwc_error_intr(struct a
- 		hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);
- 
- 	/* Clear error register and interrupt bit */
--	clear_serror();
-+	clear_serror(ap);
- 	clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
- 
- 	/* This is the only error happening now.  TODO check for exact error */
-@@ -462,12 +515,12 @@ static irqreturn_t sata_dwc_isr(int irq,
- 	int handled, num_processed, port = 0;
- 	uint intpr, sactive, sactive2, tag_mask;
- 	struct sata_dwc_device_port *hsdevp;
--	host_pvt.sata_dwc_sactive_issued = 0;
-+	hsdev->sactive_issued = 0;
- 
- 	spin_lock_irqsave(&host->lock, flags);
- 
- 	/* Read the interrupt register */
--	intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
-+	intpr = sata_dwc_readl(&hsdev->sata_dwc_regs->intpr);
- 
- 	ap = host->ports[port];
- 	hsdevp = HSDEVP_FROM_AP(ap);
-@@ -486,12 +539,12 @@ static irqreturn_t sata_dwc_isr(int irq,
- 	if (intpr & SATA_DWC_INTPR_NEWFP) {
- 		clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
- 
--		tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
-+		tag = (u8)(sata_dwc_readl(&hsdev->sata_dwc_regs->fptagr));
- 		dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
- 		if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
- 			dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
- 
--		host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
-+		hsdev->sactive_issued |= qcmd_tag_to_mask(tag);
- 
- 		qc = ata_qc_from_tag(ap, tag);
- 		/*
-@@ -505,11 +558,11 @@ static irqreturn_t sata_dwc_isr(int irq,
- 		handled = 1;
- 		goto DONE;
- 	}
--	sactive = core_scr_read(SCR_ACTIVE);
--	tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
-+	sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
-+	tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
- 
- 	/* If no sactive issued and tag_mask is zero then this is not NCQ */
--	if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) {
-+	if (hsdev->sactive_issued == 0 && tag_mask == 0) {
- 		if (ap->link.active_tag == ATA_TAG_POISON)
- 			tag = 0;
- 		else
-@@ -579,22 +632,19 @@ DRVSTILLBUSY:
- 	 */
- 
- 	 /* process completed commands */
--	sactive = core_scr_read(SCR_ACTIVE);
--	tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
-+	sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
-+	tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
- 
--	if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
--							tag_mask > 1) {
-+	if (sactive != 0 || hsdev->sactive_issued > 1 || tag_mask > 1) {
- 		dev_dbg(ap->dev,
- 			"%s NCQ:sactive=0x%08x  sactive_issued=0x%08x tag_mask=0x%08x\n",
--			__func__, sactive, host_pvt.sata_dwc_sactive_issued,
--			tag_mask);
-+			__func__, sactive, hsdev->sactive_issued, tag_mask);
- 	}
- 
--	if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
--					(host_pvt.sata_dwc_sactive_issued)) {
-+	if ((tag_mask | hsdev->sactive_issued) != hsdev->sactive_issued) {
- 		dev_warn(ap->dev,
--			 "Bad tag mask?  sactive=0x%08x (host_pvt.sata_dwc_sactive_issued)=0x%08x  tag_mask=0x%08x\n",
--			 sactive, host_pvt.sata_dwc_sactive_issued, tag_mask);
-+			 "Bad tag mask?  sactive=0x%08x sactive_issued=0x%08x  tag_mask=0x%08x\n",
-+			 sactive, hsdev->sactive_issued, tag_mask);
- 	}
- 
- 	/* read just to clear ... not bad if currently still busy */
-@@ -656,7 +706,7 @@ STILLBUSY:
- 	 * we were processing --we read status as part of processing a completed
- 	 * command).
- 	 */
--	sactive2 = core_scr_read(SCR_ACTIVE);
-+	sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive2);
- 	if (sactive2 != sactive) {
- 		dev_dbg(ap->dev,
- 			"More completed - sactive=0x%x sactive2=0x%x\n",
-@@ -672,15 +722,14 @@ DONE:
- static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
- {
- 	struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
-+	u32 dmacr = sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr);
- 
- 	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
--		out_le32(&(hsdev->sata_dwc_regs->dmacr),
--			 SATA_DWC_DMACR_RX_CLEAR(
--				 in_le32(&(hsdev->sata_dwc_regs->dmacr))));
-+		dmacr = SATA_DWC_DMACR_RX_CLEAR(dmacr);
-+		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
- 	} else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
--		out_le32(&(hsdev->sata_dwc_regs->dmacr),
--			 SATA_DWC_DMACR_TX_CLEAR(
--				 in_le32(&(hsdev->sata_dwc_regs->dmacr))));
-+		dmacr = SATA_DWC_DMACR_TX_CLEAR(dmacr);
-+		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
- 	} else {
- 		/*
- 		 * This should not happen, it indicates the driver is out of
-@@ -688,10 +737,9 @@ static void sata_dwc_clear_dmacr(struct
- 		 */
- 		dev_err(hsdev->dev,
- 			"%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
--			__func__, tag, hsdevp->dma_pending[tag],
--			in_le32(&hsdev->sata_dwc_regs->dmacr));
--		out_le32(&(hsdev->sata_dwc_regs->dmacr),
--			SATA_DWC_DMACR_TXRXCH_CLEAR);
-+			__func__, tag, hsdevp->dma_pending[tag], dmacr);
-+		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+				SATA_DWC_DMACR_TXRXCH_CLEAR);
- 	}
- }
- 
-@@ -716,7 +764,7 @@ static void sata_dwc_dma_xfer_complete(s
- 			 __func__, qc->tag, qc->tf.command,
- 			 get_dma_dir_descript(qc->dma_dir),
- 			 get_prot_descript(qc->tf.protocol),
--			 in_le32(&(hsdev->sata_dwc_regs->dmacr)));
-+			 sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
- 	}
- #endif
- 
-@@ -725,7 +773,7 @@ static void sata_dwc_dma_xfer_complete(s
- 			dev_err(ap->dev,
- 				"%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n",
- 				__func__,
--				in_le32(&(hsdev->sata_dwc_regs->dmacr)));
-+				sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
- 		}
- 
- 		hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
-@@ -742,8 +790,9 @@ static int sata_dwc_qc_complete(struct a
- 	u8 status = 0;
- 	u32 mask = 0x0;
- 	u8 tag = qc->tag;
-+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
- 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
--	host_pvt.sata_dwc_sactive_queued = 0;
-+	hsdev->sactive_queued = 0;
- 	dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
- 
- 	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
-@@ -756,10 +805,8 @@ static int sata_dwc_qc_complete(struct a
- 
- 	/* clear active bit */
- 	mask = (~(qcmd_tag_to_mask(tag)));
--	host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \
--						& mask;
--	host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \
--						& mask;
-+	hsdev->sactive_queued = hsdev->sactive_queued & mask;
-+	hsdev->sactive_issued = hsdev->sactive_issued & mask;
- 	ata_qc_complete(qc);
- 	return 0;
- }
-@@ -767,54 +814,62 @@ static int sata_dwc_qc_complete(struct a
- static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
- {
- 	/* Enable selective interrupts by setting the interrupt maskregister*/
--	out_le32(&hsdev->sata_dwc_regs->intmr,
--		 SATA_DWC_INTMR_ERRM |
--		 SATA_DWC_INTMR_NEWFPM |
--		 SATA_DWC_INTMR_PMABRTM |
--		 SATA_DWC_INTMR_DMATM);
-+	sata_dwc_writel(&hsdev->sata_dwc_regs->intmr,
-+			SATA_DWC_INTMR_ERRM |
-+			SATA_DWC_INTMR_NEWFPM |
-+			SATA_DWC_INTMR_PMABRTM |
-+			SATA_DWC_INTMR_DMATM);
- 	/*
- 	 * Unmask the error bits that should trigger an error interrupt by
- 	 * setting the error mask register.
- 	 */
--	out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
-+	sata_dwc_writel(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
- 
- 	dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
--		 __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
--		in_le32(&hsdev->sata_dwc_regs->errmr));
-+		 __func__, sata_dwc_readl(&hsdev->sata_dwc_regs->intmr),
-+		sata_dwc_readl(&hsdev->sata_dwc_regs->errmr));
- }
- 
--static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
-+static void sata_dwc_setup_port(struct ata_ioports *port, void __iomem *base)
- {
--	struct sata_dwc_device_port *hsdevp = param;
--	struct dw_dma_slave *dws = hsdevp->dws;
-+	port->cmd_addr		= base + 0x00;
-+	port->data_addr		= base + 0x00;
- 
--	if (dws->dma_dev != chan->device->dev)
--		return false;
-+	port->error_addr	= base + 0x04;
-+	port->feature_addr	= base + 0x04;
- 
--	chan->private = dws;
--	return true;
--}
-+	port->nsect_addr	= base + 0x08;
- 
--static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
--{
--	port->cmd_addr = (void __iomem *)base + 0x00;
--	port->data_addr = (void __iomem *)base + 0x00;
-+	port->lbal_addr		= base + 0x0c;
-+	port->lbam_addr		= base + 0x10;
-+	port->lbah_addr		= base + 0x14;
-+
-+	port->device_addr	= base + 0x18;
-+	port->command_addr	= base + 0x1c;
-+	port->status_addr	= base + 0x1c;
- 
--	port->error_addr = (void __iomem *)base + 0x04;
--	port->feature_addr = (void __iomem *)base + 0x04;
-+	port->altstatus_addr	= base + 0x20;
-+	port->ctl_addr		= base + 0x20;
-+}
- 
--	port->nsect_addr = (void __iomem *)base + 0x08;
-+static int sata_dwc_dma_get_channel(struct sata_dwc_device_port *hsdevp)
-+{
-+	struct sata_dwc_device *hsdev = hsdevp->hsdev;
-+	struct device *dev = hsdev->dev;
- 
--	port->lbal_addr = (void __iomem *)base + 0x0c;
--	port->lbam_addr = (void __iomem *)base + 0x10;
--	port->lbah_addr = (void __iomem *)base + 0x14;
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
-+	if (!of_find_property(dev->of_node, "dmas", NULL))
-+		return sata_dwc_dma_get_channel_old(hsdevp);
-+#endif
- 
--	port->device_addr = (void __iomem *)base + 0x18;
--	port->command_addr = (void __iomem *)base + 0x1c;
--	port->status_addr = (void __iomem *)base + 0x1c;
-+	hsdevp->chan = dma_request_chan(dev, "sata-dma");
-+	if (IS_ERR(hsdevp->chan)) {
-+		dev_err(dev, "failed to allocate dma channel: %ld\n",
-+			PTR_ERR(hsdevp->chan));
-+		return PTR_ERR(hsdevp->chan);
-+	}
- 
--	port->altstatus_addr = (void __iomem *)base + 0x20;
--	port->ctl_addr = (void __iomem *)base + 0x20;
-+	return 0;
- }
- 
- /*
-@@ -829,7 +884,6 @@ static int sata_dwc_port_start(struct at
- 	struct sata_dwc_device *hsdev;
- 	struct sata_dwc_device_port *hsdevp = NULL;
- 	struct device *pdev;
--	dma_cap_mask_t mask;
- 	int i;
- 
- 	hsdev = HSDEV_FROM_AP(ap);
-@@ -853,20 +907,13 @@ static int sata_dwc_port_start(struct at
- 	}
- 	hsdevp->hsdev = hsdev;
- 
--	hsdevp->dws = &sata_dwc_dma_dws;
--	hsdevp->dws->dma_dev = hsdev->dev;
--
--	dma_cap_zero(mask);
--	dma_cap_set(DMA_SLAVE, mask);
-+	err = sata_dwc_dma_get_channel(hsdevp);
-+	if (err)
-+		goto CLEANUP_ALLOC;
- 
--	/* Acquire DMA channel */
--	hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
--	if (!hsdevp->chan) {
--		dev_err(hsdev->dev, "%s: dma channel unavailable\n",
--			 __func__);
--		err = -EAGAIN;
-+	err = phy_power_on(hsdev->phy);
-+	if (err)
- 		goto CLEANUP_ALLOC;
--	}
- 
- 	for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
- 		hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
-@@ -877,18 +924,18 @@ static int sata_dwc_port_start(struct at
- 	if (ap->port_no == 0)  {
- 		dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
- 			__func__);
--		out_le32(&hsdev->sata_dwc_regs->dmacr,
--			 SATA_DWC_DMACR_TXRXCH_CLEAR);
-+		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+				SATA_DWC_DMACR_TXRXCH_CLEAR);
- 
- 		dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n",
- 			 __func__);
--		out_le32(&hsdev->sata_dwc_regs->dbtsr,
--			 (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
--			  SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
-+		sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
-+				(SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
-+				 SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
- 	}
- 
- 	/* Clear any error bits before libata starts issuing commands */
--	clear_serror();
-+	clear_serror(ap);
- 	ap->private_data = hsdevp;
- 	dev_dbg(ap->dev, "%s: done\n", __func__);
- 	return 0;
-@@ -903,11 +950,13 @@ CLEANUP:
- static void sata_dwc_port_stop(struct ata_port *ap)
- {
- 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
-+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
- 
- 	dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
- 
--	dmaengine_terminate_all(hsdevp->chan);
-+	dmaengine_terminate_sync(hsdevp->chan);
- 	dma_release_channel(hsdevp->chan);
-+	phy_power_off(hsdev->phy);
- 
- 	kfree(hsdevp);
- 	ap->private_data = NULL;
-@@ -924,22 +973,20 @@ static void sata_dwc_exec_command_by_tag
- 					 struct ata_taskfile *tf,
- 					 u8 tag, u32 cmd_issued)
- {
--	unsigned long flags;
- 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
- 
- 	dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
- 		ata_get_cmd_descript(tf->command), tag);
- 
--	spin_lock_irqsave(&ap->host->lock, flags);
- 	hsdevp->cmd_issued[tag] = cmd_issued;
--	spin_unlock_irqrestore(&ap->host->lock, flags);
-+
- 	/*
- 	 * Clear SError before executing a new command.
- 	 * sata_dwc_scr_write and read can not be used here. Clearing the PM
- 	 * managed SError register for the disk needs to be done before the
- 	 * task file is loaded.
- 	 */
--	clear_serror();
-+	clear_serror(ap);
- 	ata_sff_exec_command(ap, tf);
- }
- 
-@@ -992,18 +1039,18 @@ static void sata_dwc_bmdma_start_by_tag(
- 	sata_dwc_tf_dump(ap, &qc->tf);
- 
- 	if (start_dma) {
--		reg = core_scr_read(SCR_ERROR);
-+		sata_dwc_scr_read(&ap->link, SCR_ERROR, &reg);
- 		if (reg & SATA_DWC_SERROR_ERR_BITS) {
- 			dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
- 				__func__, reg);
- 		}
- 
- 		if (dir == DMA_TO_DEVICE)
--			out_le32(&hsdev->sata_dwc_regs->dmacr,
--				SATA_DWC_DMACR_TXCHEN);
-+			sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+					SATA_DWC_DMACR_TXCHEN);
- 		else
--			out_le32(&hsdev->sata_dwc_regs->dmacr,
--				SATA_DWC_DMACR_RXCHEN);
-+			sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+					SATA_DWC_DMACR_RXCHEN);
- 
- 		/* Enable AHB DMA transfer on the specified channel */
- 		dmaengine_submit(desc);
-@@ -1025,36 +1072,12 @@ static void sata_dwc_bmdma_start(struct
- 	sata_dwc_bmdma_start_by_tag(qc, tag);
- }
- 
--/*
-- * Function : sata_dwc_qc_prep_by_tag
-- * arguments : ata_queued_cmd *qc, u8 tag
-- * Return value : None
-- * qc_prep for a particular queued command based on tag
-- */
--static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
--{
--	struct dma_async_tx_descriptor *desc;
--	struct ata_port *ap = qc->ap;
--	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
--
--	dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
--		__func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
--		 qc->n_elem);
--
--	desc = dma_dwc_xfer_setup(qc);
--	if (!desc) {
--		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n",
--			__func__);
--		return;
--	}
--	hsdevp->desc[tag] = desc;
--}
--
- static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
- {
- 	u32 sactive;
- 	u8 tag = qc->tag;
- 	struct ata_port *ap = qc->ap;
-+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
- 
- #ifdef DEBUG_NCQ
- 	if (qc->tag > 0 || ap->link.sactive > 1)
-@@ -1068,47 +1091,33 @@ static unsigned int sata_dwc_qc_issue(st
- 
- 	if (!ata_is_ncq(qc->tf.protocol))
- 		tag = 0;
--	sata_dwc_qc_prep_by_tag(qc, tag);
-+
-+	if (ata_is_dma(qc->tf.protocol)) {
-+		hsdevp->desc[tag] = dma_dwc_xfer_setup(qc);
-+		if (!hsdevp->desc[tag])
-+			return AC_ERR_SYSTEM;
-+	} else {
-+		hsdevp->desc[tag] = NULL;
-+	}
- 
- 	if (ata_is_ncq(qc->tf.protocol)) {
--		sactive = core_scr_read(SCR_ACTIVE);
-+		sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
- 		sactive |= (0x00000001 << tag);
--		core_scr_write(SCR_ACTIVE, sactive);
-+		sata_dwc_scr_write(&ap->link, SCR_ACTIVE, sactive);
- 
- 		dev_dbg(qc->ap->dev,
- 			"%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n",
- 			__func__, tag, qc->ap->link.sactive, sactive);
- 
- 		ap->ops->sff_tf_load(ap, &qc->tf);
--		sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
-+		sata_dwc_exec_command_by_tag(ap, &qc->tf, tag,
- 					     SATA_DWC_CMD_ISSUED_PEND);
- 	} else {
--		ata_sff_qc_issue(qc);
-+		return ata_bmdma_qc_issue(qc);
- 	}
- 	return 0;
- }
- 
--/*
-- * Function : sata_dwc_qc_prep
-- * arguments : ata_queued_cmd *qc
-- * Return value : None
-- * qc_prep for a particular queued command
-- */
--
--static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
--{
--	if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
--		return;
--
--#ifdef DEBUG_NCQ
--	if (qc->tag > 0)
--		dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
--			 __func__, qc->tag, qc->ap->link.active_tag);
--
--	return ;
--#endif
--}
--
- static void sata_dwc_error_handler(struct ata_port *ap)
- {
- 	ata_sff_error_handler(ap);
-@@ -1125,17 +1134,22 @@ static int sata_dwc_hardreset(struct ata
- 	sata_dwc_enable_interrupts(hsdev);
- 
- 	/* Reconfigure the DMA control register */
--	out_le32(&hsdev->sata_dwc_regs->dmacr,
--		 SATA_DWC_DMACR_TXRXCH_CLEAR);
-+	sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-+			SATA_DWC_DMACR_TXRXCH_CLEAR);
- 
- 	/* Reconfigure the DMA Burst Transaction Size register */
--	out_le32(&hsdev->sata_dwc_regs->dbtsr,
--		 SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
--		 SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
-+	sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
-+			SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
-+			SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
- 
- 	return ret;
- }
- 
-+static void sata_dwc_dev_select(struct ata_port *ap, unsigned int device)
-+{
-+	/* SATA DWC is master only */
-+}
-+
- /*
-  * scsi mid-layer and libata interface structures
-  */
-@@ -1148,7 +1162,13 @@ static struct scsi_host_template sata_dw
- 	 */
- 	.sg_tablesize		= LIBATA_MAX_PRD,
- 	/* .can_queue		= ATA_MAX_QUEUE, */
--	.dma_boundary		= ATA_DMA_BOUNDARY,
-+	/*
-+	 * Make sure a LLI block is not created that will span 8K max FIS
-+	 * boundary. If the block spans such a FIS boundary, there is a chance
-+	 * that a DMA burst will cross that boundary -- this results in an
-+	 * error in the host controller.
-+	 */
-+	.dma_boundary		= 0x1fff /* ATA_DMA_BOUNDARY */,
- };
- 
- static struct ata_port_operations sata_dwc_ops = {
-@@ -1157,7 +1177,6 @@ static struct ata_port_operations sata_d
- 	.error_handler		= sata_dwc_error_handler,
- 	.hardreset		= sata_dwc_hardreset,
- 
--	.qc_prep		= sata_dwc_qc_prep,
- 	.qc_issue		= sata_dwc_qc_issue,
- 
- 	.scr_read		= sata_dwc_scr_read,
-@@ -1166,6 +1185,8 @@ static struct ata_port_operations sata_d
- 	.port_start		= sata_dwc_port_start,
- 	.port_stop		= sata_dwc_port_stop,
- 
-+	.sff_dev_select		= sata_dwc_dev_select,
-+
- 	.bmdma_setup		= sata_dwc_bmdma_setup,
- 	.bmdma_start		= sata_dwc_bmdma_start,
- };
-@@ -1184,13 +1205,14 @@ static int sata_dwc_probe(struct platfor
- 	struct sata_dwc_device *hsdev;
- 	u32 idr, versionr;
- 	char *ver = (char *)&versionr;
--	u8 __iomem *base;
-+	void __iomem *base;
- 	int err = 0;
- 	int irq;
- 	struct ata_host *host;
- 	struct ata_port_info pi = sata_dwc_port_info[0];
- 	const struct ata_port_info *ppi[] = { &pi, NULL };
- 	struct device_node *np = ofdev->dev.of_node;
-+	struct resource *res;
- 
- 	/* Allocate DWC SATA device */
- 	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
-@@ -1201,57 +1223,33 @@ static int sata_dwc_probe(struct platfor
- 	host->private_data = hsdev;
- 
- 	/* Ioremap SATA registers */
--	base = of_iomap(np, 0);
--	if (!base) {
-+	res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
-+	base = devm_ioremap_resource(&ofdev->dev, res);
-+	if (IS_ERR(base)) {
- 		dev_err(&ofdev->dev,
- 			"ioremap failed for SATA register address\n");
--		return -ENODEV;
-+		return PTR_ERR(base);
- 	}
--	hsdev->reg_base = base;
- 	dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
- 
- 	/* Synopsys DWC SATA specific Registers */
--	hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
-+	hsdev->sata_dwc_regs = base + SATA_DWC_REG_OFFSET;
-+	hsdev->dmadr = res->start + SATA_DWC_REG_OFFSET + offsetof(struct sata_dwc_regs, dmadr);
- 
- 	/* Setup port */
- 	host->ports[0]->ioaddr.cmd_addr = base;
- 	host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
--	host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
--	sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
-+	sata_dwc_setup_port(&host->ports[0]->ioaddr, base);
- 
- 	/* Read the ID and Version Registers */
--	idr = in_le32(&hsdev->sata_dwc_regs->idr);
--	versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
-+	idr = sata_dwc_readl(&hsdev->sata_dwc_regs->idr);
-+	versionr = sata_dwc_readl(&hsdev->sata_dwc_regs->versionr);
- 	dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
- 		   idr, ver[0], ver[1], ver[2]);
- 
--	/* Get SATA DMA interrupt number */
--	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
--	if (hsdev->dma->irq == NO_IRQ) {
--		dev_err(&ofdev->dev, "no SATA DMA irq\n");
--		err = -ENODEV;
--		goto error_iomap;
--	}
--
--	/* Get physical SATA DMA register base address */
--	hsdev->dma->regs = of_iomap(np, 1);
--	if (!hsdev->dma->regs) {
--		dev_err(&ofdev->dev,
--			"ioremap failed for AHBDMA register address\n");
--		err = -ENODEV;
--		goto error_iomap;
--	}
--
- 	/* Save dev for later use in dev_xxx() routines */
- 	hsdev->dev = &ofdev->dev;
- 
--	hsdev->dma->dev = &ofdev->dev;
--
--	/* Initialize AHB DMAC */
--	err = dw_dma_probe(hsdev->dma, NULL);
--	if (err)
--		goto error_dma_iomap;
--
- 	/* Enable SATA Interrupts */
- 	sata_dwc_enable_interrupts(hsdev);
- 
-@@ -1263,6 +1261,25 @@ static int sata_dwc_probe(struct platfor
- 		goto error_out;
- 	}
- 
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
-+	if (!of_find_property(np, "dmas", NULL)) {
-+		err = sata_dwc_dma_init_old(ofdev, hsdev);
-+		if (err)
-+			goto error_out;
-+	}
-+#endif
-+
-+	hsdev->phy = devm_phy_optional_get(hsdev->dev, "sata-phy");
-+	if (IS_ERR(hsdev->phy)) {
-+		err = PTR_ERR(hsdev->phy);
-+		hsdev->phy = NULL;
-+		goto error_out;
-+	}
-+
-+	err = phy_init(hsdev->phy);
-+	if (err)
-+		goto error_out;
-+
- 	/*
- 	 * Now, register with libATA core, this will also initiate the
- 	 * device discovery process, invoking our port_start() handler &
-@@ -1276,12 +1293,7 @@ static int sata_dwc_probe(struct platfor
- 	return 0;
- 
- error_out:
--	/* Free SATA DMA resources */
--	dw_dma_remove(hsdev->dma);
--error_dma_iomap:
--	iounmap(hsdev->dma->regs);
--error_iomap:
--	iounmap(base);
-+	phy_exit(hsdev->phy);
- 	return err;
- }
- 
-@@ -1293,11 +1305,13 @@ static int sata_dwc_remove(struct platfo
- 
- 	ata_host_detach(host);
- 
-+	phy_exit(hsdev->phy);
-+
-+#ifdef CONFIG_SATA_DWC_OLD_DMA
- 	/* Free SATA DMA resources */
--	dw_dma_remove(hsdev->dma);
-+	sata_dwc_dma_exit_old(hsdev);
-+#endif
- 
--	iounmap(hsdev->dma->regs);
--	iounmap(hsdev->reg_base);
- 	dev_dbg(&ofdev->dev, "done\n");
- 	return 0;
- }
diff --git a/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch b/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch
deleted file mode 100644
index 48714aa466..0000000000
--- a/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-From eb25cb9956cc9384b7fa0d75dec908c9fac8c444 Mon Sep 17 00:00:00 2001
-From: Stephan Linz <linz@li-pro.net>
-Date: Fri, 10 Jun 2016 07:59:56 +0200
-Subject: [PATCH] leds: convert IDE trigger to common disk trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch converts the IDE specific LED trigger to a generic disk
-activity LED trigger. The libata core is now a trigger source just
-like before the IDE disk driver. It's merely a replacement of the
-string ide by disk.
-
-The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is
-widely used by any ibook/powerbook owners with great satisfaction.
-Likewise, it is very often used successfully on different ARM platforms.
-
-Unlike the original patch, the existing 'ide-disk' trigger is still
-available for backward compatibility. That reduce the amount of patches
-in affected device trees out of the mainline kernel. For further
-development, the new name 'disk-activity' should be used.
-
-Cc: Joseph Jezak <josejx@gentoo.org>
-Cc: Jörg Sommer <joerg@alea.gnuu.de>
-Cc: Richard Purdie <rpurdie@rpsys.net>
-Signed-off-by: Stephan Linz <linz@li-pro.net>
-Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
----
- drivers/ata/libata-core.c               |  4 ++++
- drivers/ide/ide-disk.c                  |  2 +-
- drivers/leds/trigger/Kconfig            |  8 +++----
- drivers/leds/trigger/Makefile           |  2 +-
- drivers/leds/trigger/ledtrig-disk.c     | 41 +++++++++++++++++++++++++++++++++
- drivers/leds/trigger/ledtrig-ide-disk.c | 36 -----------------------------
- include/linux/leds.h                    |  6 ++---
- 8 files changed, 55 insertions(+), 46 deletions(-)
- create mode 100644 drivers/leds/trigger/ledtrig-disk.c
- delete mode 100644 drivers/leds/trigger/ledtrig-ide-disk.c
-
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -67,6 +67,7 @@
- #include <asm/byteorder.h>
- #include <linux/cdrom.h>
- #include <linux/ratelimit.h>
-+#include <linux/leds.h>
- #include <linux/pm_runtime.h>
- #include <linux/platform_device.h>
- 
-@@ -4914,6 +4915,9 @@ void ata_qc_complete(struct ata_queued_c
- {
- 	struct ata_port *ap = qc->ap;
- 
-+	/* Trigger the LED (if available) */
-+	ledtrig_disk_activity();
-+
- 	/* XXX: New EH and old EH use different mechanisms to
- 	 * synchronize EH with regular execution path.
- 	 *
---- a/drivers/ide/ide-disk.c
-+++ b/drivers/ide/ide-disk.c
-@@ -186,7 +186,7 @@ static ide_startstop_t ide_do_rw_disk(id
- 	BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
- 	BUG_ON(rq->cmd_type != REQ_TYPE_FS);
- 
--	ledtrig_ide_activity();
-+	ledtrig_disk_activity();
- 
- 	pr_debug("%s: %sing: block=%llu, sectors=%u\n",
- 		 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
---- a/drivers/leds/trigger/Kconfig
-+++ b/drivers/leds/trigger/Kconfig
-@@ -33,12 +33,12 @@ config LEDS_TRIGGER_ONESHOT
- 
- 	  If unsure, say Y.
- 
--config LEDS_TRIGGER_IDE_DISK
--	bool "LED IDE Disk Trigger"
--	depends on IDE_GD_ATA
-+config LEDS_TRIGGER_DISK
-+	bool "LED Disk Trigger"
-+	depends on IDE_GD_ATA || ATA
- 	depends on LEDS_TRIGGERS
- 	help
--	  This allows LEDs to be controlled by IDE disk activity.
-+	  This allows LEDs to be controlled by disk activity.
- 	  If unsure, say Y.
- 
- config LEDS_TRIGGER_HEARTBEAT
---- a/drivers/leds/trigger/Makefile
-+++ b/drivers/leds/trigger/Makefile
-@@ -1,6 +1,6 @@
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
- obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
--obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
-+obj-$(CONFIG_LEDS_TRIGGER_DISK)		+= ledtrig-disk.o
- obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
- obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
- obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
---- /dev/null
-+++ b/drivers/leds/trigger/ledtrig-disk.c
-@@ -0,0 +1,41 @@
-+/*
-+ * LED Disk Activity Trigger
-+ *
-+ * Copyright 2006 Openedhand Ltd.
-+ *
-+ * Author: Richard Purdie <rpurdie@openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/leds.h>
-+
-+#define BLINK_DELAY 30
-+
-+DEFINE_LED_TRIGGER(ledtrig_disk);
-+DEFINE_LED_TRIGGER(ledtrig_ide);
-+
-+void ledtrig_disk_activity(void)
-+{
-+	unsigned long blink_delay = BLINK_DELAY;
-+
-+	led_trigger_blink_oneshot(ledtrig_disk,
-+				  &blink_delay, &blink_delay, 0);
-+	led_trigger_blink_oneshot(ledtrig_ide,
-+				  &blink_delay, &blink_delay, 0);
-+}
-+EXPORT_SYMBOL(ledtrig_disk_activity);
-+
-+static int __init ledtrig_disk_init(void)
-+{
-+	led_trigger_register_simple("disk-activity", &ledtrig_disk);
-+	led_trigger_register_simple("ide-disk", &ledtrig_ide);
-+
-+	return 0;
-+}
-+device_initcall(ledtrig_disk_init);
---- a/drivers/leds/trigger/ledtrig-ide-disk.c
-+++ /dev/null
-@@ -1,47 +0,0 @@
--/*
-- * LED IDE-Disk Activity Trigger
-- *
-- * Copyright 2006 Openedhand Ltd.
-- *
-- * Author: Richard Purdie <rpurdie@openedhand.com>
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- */
--
--#include <linux/module.h>
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/leds.h>
--
--#define BLINK_DELAY 30
--
--DEFINE_LED_TRIGGER(ledtrig_ide);
--static unsigned long ide_blink_delay = BLINK_DELAY;
--
--void ledtrig_ide_activity(void)
--{
--	led_trigger_blink_oneshot(ledtrig_ide,
--				  &ide_blink_delay, &ide_blink_delay, 0);
--}
--EXPORT_SYMBOL(ledtrig_ide_activity);
--
--static int __init ledtrig_ide_init(void)
--{
--	led_trigger_register_simple("ide-disk", &ledtrig_ide);
--	return 0;
--}
--
--static void __exit ledtrig_ide_exit(void)
--{
--	led_trigger_unregister_simple(ledtrig_ide);
--}
--
--module_init(ledtrig_ide_init);
--module_exit(ledtrig_ide_exit);
--
--MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
--MODULE_DESCRIPTION("LED IDE Disk Activity Trigger");
--MODULE_LICENSE("GPL");
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -308,10 +308,10 @@ static inline void *led_get_trigger_data
- #endif /* CONFIG_LEDS_TRIGGERS */
- 
- /* Trigger specific functions */
--#ifdef CONFIG_LEDS_TRIGGER_IDE_DISK
--extern void ledtrig_ide_activity(void);
-+#ifdef CONFIG_LEDS_TRIGGER_DISK
-+extern void ledtrig_disk_activity(void);
- #else
--static inline void ledtrig_ide_activity(void) {}
-+static inline void ledtrig_disk_activity(void) {}
- #endif
- 
- #if defined(CONFIG_LEDS_TRIGGER_CAMERA) || defined(CONFIG_LEDS_TRIGGER_CAMERA_MODULE)
diff --git a/target/linux/apm821xx/patches-4.4/200-add-meraki-mr24-ikarem-support.patch b/target/linux/apm821xx/patches-4.4/200-add-meraki-mr24-ikarem-support.patch
deleted file mode 100644
index 018bcf21a0..0000000000
--- a/target/linux/apm821xx/patches-4.4/200-add-meraki-mr24-ikarem-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -40,6 +40,19 @@ config EBONY
- 	help
- 	  This option enables support for the IBM PPC440GP evaluation board.
- 
-+config IKAREM
-+	bool "Ikarem"
-+	depends on 44x
-+	default n
-+	select PPC44x_SIMPLE
-+	select APM821xx
-+	select PCI_MSI
-+	select PPC4xx_MSI
-+	select PPC4xx_PCI_EXPRESS
-+	select IBM_EMAC_RGMII
-+	help
-+	  This option enables support for the Cisco Meraki MR24 (Ikarem) Access Point.
-+
- config SAM440EP
-         bool "Sam440ep"
- 	depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -62,6 +62,7 @@ static char *board[] __initdata = {
- 	"amcc,sequoia",
- 	"amcc,taishan",
- 	"amcc,yosemite",
-+	"meraki,ikarem",
- 	"mosaixtech,icon"
- };
- 
diff --git a/target/linux/apm821xx/patches-4.4/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-4.4/201-add-amcc-apollo3g-support.patch
deleted file mode 100644
index 0581a43e33..0000000000
--- a/target/linux/apm821xx/patches-4.4/201-add-amcc-apollo3g-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -143,6 +143,17 @@ config CANYONLANDS
- 	help
- 	  This option enables support for the AMCC PPC460EX evaluation board.
- 
-+config APOLLO3G
-+	bool "Apollo3G"
-+	depends on 44x
-+	default n
-+	select PPC44x_SIMPLE
-+	select APM821xx
-+	select IBM_EMAC_RGMII
-+	select 460EX
-+	help
-+	  This option enables support for the AMCC Apollo 3G board.
-+
- config GLACIER
- 	bool "Glacier"
- 	depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p
-  * board.c file for it rather than adding it to this list.
-  */
- static char *board[] __initdata = {
-+	"amcc,apollo3g",
- 	"amcc,arches",
- 	"amcc,bamboo",
- 	"apm,bluestone",
diff --git a/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch b/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch
deleted file mode 100644
index 6b6db1dddb..0000000000
--- a/target/linux/apm821xx/patches-4.4/202-add-netgear-wndr4700-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Makefile
-+++ b/arch/powerpc/platforms/44x/Makefile
-@@ -3,6 +3,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
- obj-$(CONFIG_44x)	+= idle.o
- endif
- obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
-+obj-$(CONFIG_WNDR4700) += wndr4700.o
- obj-$(CONFIG_EBONY)	+= ebony.o
- obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
- obj-$(CONFIG_WARP)	+= warp.o
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -260,6 +260,19 @@ config ICON
- 	help
- 	  This option enables support for the AMCC PPC440SPe evaluation board.
- 
-+config WNDR4700
-+	bool "WNDR4700"
-+	depends on 44x
-+	default n
-+	select APM821xx
-+	select PCI_MSI
-+	select PPC4xx_MSI
-+	select PPC4xx_PCI_EXPRESS
-+	select IBM_EMAC_RGMII
-+	select 460EX
-+	help
-+	  This option enables support for the Netgear WNDR4700/WNDR4720 board.
-+
- config XILINX_VIRTEX440_GENERIC_BOARD
- 	bool "Generic Xilinx Virtex 5 FXT board support"
- 	depends on 44x
diff --git a/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch b/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch
deleted file mode 100644
index 8c072387d4..0000000000
--- a/target/linux/apm821xx/patches-4.4/203-add-meraki-mx60-buckminster-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -30,6 +30,19 @@ config BLUESTONE
- 	help
- 	  This option enables support for the APM APM821xx Evaluation board.
- 
-+config BUCKMINSTER
-+	bool "Buckminster"
-+	depends on 44x
-+	default n
-+	select APM821xx
-+	select PCI_MSI
-+	select PPC4xx_MSI
-+	select PPC4xx_PCI_EXPRESS
-+	select IBM_EMAC_RGMII
-+	select 460EX
-+	help
-+	  This option enables support for the Cisco Meraki MX60/MX60W (Buckminster) Security Appliance
-+
- config EBONY
- 	bool "Ebony"
- 	depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -63,6 +63,7 @@ static char *board[] __initdata = {
- 	"amcc,sequoia",
- 	"amcc,taishan",
- 	"amcc,yosemite",
-+	"meraki,buckminster",
- 	"meraki,ikarem",
- 	"mosaixtech,icon"
- };
diff --git a/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch
deleted file mode 100644
index 0b1affcfe7..0000000000
--- a/target/linux/apm821xx/patches-4.4/300-fix-atheros-nics-on-apm82181.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/powerpc/sysdev/ppc4xx_pci.c
-+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
-@@ -1066,15 +1066,24 @@ static int __init apm821xx_pciex_init_po
- 	u32 val;
- 
- 	/*
--	 * Do a software reset on PCIe ports.
--	 * This code is to fix the issue that pci drivers doesn't re-assign
--	 * bus number for PCIE devices after Uboot
--	 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
--	 * PT quad port, SAS LSI 1064E)
-+	 * Only reset the PHY when no link is currently established.
-+	 * This is for the Atheros PCIe board which has problems to establish
-+	 * the link (again) after this PHY reset. All other currently tested
-+	 * PCIe boards don't show this problem.
- 	 */
--
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
--	mdelay(10);
-+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+	if (!(val & 0x00001000)) {
-+		/*
-+		 * Do a software reset on PCIe ports.
-+		 * This code is to fix the issue that pci drivers doesn't re-assign
-+		 * bus number for PCIE devices after Uboot
-+		 * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-+		 * PT quad port, SAS LSI 1064E)
-+		 */
-+
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-+		mdelay(10);
-+	}
- 
- 	if (port->endpoint)
- 		val = PTYPE_LEGACY_ENDPOINT << 20;
-@@ -1091,9 +1100,12 @@ static int __init apm821xx_pciex_init_po
- 	mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
- 	mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
- 
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
--	mdelay(50);
--	mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+	if (!(val & 0x00001000)) {
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-+		mdelay(50);
-+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+	}
- 
- 	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- 		mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
diff --git a/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch
deleted file mode 100644
index d6a1006177..0000000000
--- a/target/linux/apm821xx/patches-4.4/301-fix-memory-map-wndr4700.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/powerpc/sysdev/ppc4xx_pci.c
-+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
-@@ -1913,9 +1913,9 @@ static void __init ppc4xx_configure_pcie
- 		 * if it works
- 		 */
- 		out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
--		out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
-+		out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
- 		out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
--		out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
-+		out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
- 		out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- 		out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
- 
diff --git a/target/linux/apm821xx/patches-4.4/701-powerpc_ibm_apm82181_phyclk_fix.patch b/target/linux/apm821xx/patches-4.4/701-powerpc_ibm_apm82181_phyclk_fix.patch
deleted file mode 100644
index 011e785e99..0000000000
--- a/target/linux/apm821xx/patches-4.4/701-powerpc_ibm_apm82181_phyclk_fix.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/drivers/net/ethernet/ibm/emac/core.c
-+++ b/drivers/net/ethernet/ibm/emac/core.c
-@@ -129,6 +129,7 @@ static inline void emac_report_timeout_e
- {
- 	if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
- 				  EMAC_FTR_460EX_PHY_CLK_FIX |
-+				  EMAC_FTR_APM821XX_PHY_CLK_FIX |
- 				  EMAC_FTR_440EP_PHY_CLK_FIX))
- 		DBG(dev, "%s" NL, error);
- 	else if (net_ratelimit())
-@@ -146,6 +147,10 @@ static inline void emac_rx_clk_tx(struct
- 	if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
- 		dcri_clrset(SDR0, SDR0_MFR,
- 			    0, SDR0_MFR_ECS >> dev->cell_index);
-+
-+	if (emac_has_feature(dev, EMAC_FTR_APM821XX_PHY_CLK_FIX))
-+                dcri_clrset(SDR0, SDR0_ETH_CFG,
-+                        0, 0x00000100 >> dev->cell_index);
- #endif
- }
- 
-@@ -155,6 +160,10 @@ static inline void emac_rx_clk_default(s
- 	if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
- 		dcri_clrset(SDR0, SDR0_MFR,
- 			    SDR0_MFR_ECS >> dev->cell_index, 0);
-+
-+	if (emac_has_feature(dev, EMAC_FTR_APM821XX_PHY_CLK_FIX))
-+		dcri_clrset(SDR0, SDR0_ETH_CFG,
-+			    0x00000100 >> dev->cell_index, 0);
- #endif
- }
- 
-@@ -2587,7 +2596,7 @@ static int emac_init_config(struct emac_
- 		if (of_device_is_compatible(np, "ibm,emac-apm821xx")) {
- 			dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
- 					  EMAC_FTR_APM821XX_NO_HALF_DUPLEX |
--					  EMAC_FTR_460EX_PHY_CLK_FIX);
-+					  EMAC_FTR_APM821XX_PHY_CLK_FIX);
- 		}
- 	} else if (of_device_is_compatible(np, "ibm,emac4")) {
- 		dev->features |= EMAC_FTR_EMAC4;
---- a/drivers/net/ethernet/ibm/emac/core.h
-+++ b/drivers/net/ethernet/ibm/emac/core.h
-@@ -333,6 +333,8 @@ struct emac_instance {
-  */
- #define EMAC_FTR_APM821XX_NO_HALF_DUPLEX	0x00001000
- 
-+#define EMAC_FTR_APM821XX_PHY_CLK_FIX	0x000002000
-+
- /* Right now, we don't quite handle the always/possible masks on the
-  * most optimal way as we don't have a way to say something like
-  * always EMAC4. Patches welcome.
diff --git a/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch b/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch
deleted file mode 100644
index c84e761ed0..0000000000
--- a/target/linux/apm821xx/patches-4.4/702-powerpc_ibm_phy_add_dt_parser.patch
+++ /dev/null
@@ -1,328 +0,0 @@
-From 59b394d0d2b2e11687e757820c52d6470d15a9c5 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Mon, 13 Jun 2016 15:42:21 +0200
-Subject: [PATCH] phy device tree support for emac
-
----
- drivers/net/ethernet/ibm/emac/core.c | 261 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/ibm/emac/core.h |   4 +
- 2 files changed, 265 insertions(+)
-
---- a/drivers/net/ethernet/ibm/emac/core.c
-+++ b/drivers/net/ethernet/ibm/emac/core.c
-@@ -42,6 +42,7 @@
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
- #include <linux/of_net.h>
-+#include <linux/of_mdio.h>
- #include <linux/slab.h>
- 
- #include <asm/processor.h>
-@@ -2392,6 +2393,246 @@ static int emac_read_uint_prop(struct de
- 	return 0;
- }
- 
-+static void emac_adjust_link(struct net_device *ndev)
-+{
-+	struct emac_instance *dev = netdev_priv(ndev);
-+	struct phy_device *phy = dev->phy_dev;
-+
-+	dev->phy.autoneg = phy->autoneg;
-+	dev->phy.speed = phy->speed;
-+	dev->phy.duplex = phy->duplex;
-+	dev->phy.pause = phy->pause;
-+	dev->phy.asym_pause = phy->asym_pause;
-+	dev->phy.advertising = phy->advertising;
-+}
-+
-+static int emac_mii_bus_read(struct mii_bus *bus, int addr, int regnum)
-+{
-+	return emac_mdio_read(bus->priv, addr, regnum);
-+}
-+
-+static int emac_mii_bus_write(struct mii_bus *bus, int addr, int regnum, u16 val)
-+{
-+	emac_mdio_write(bus->priv, addr, regnum, val);
-+	return 0;
-+}
-+
-+static int emac_mii_bus_reset(struct mii_bus *bus)
-+{
-+	struct emac_instance *dev = netdev_priv(bus->priv);
-+
-+	emac_mii_reset_phy(&dev->phy);
-+	return 0;
-+}
-+
-+static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
-+{
-+	struct net_device *ndev = phy->dev;
-+	struct emac_instance *dev = netdev_priv(ndev);
-+
-+	dev->phy.autoneg = AUTONEG_ENABLE;
-+	dev->phy.speed = SPEED_1000;
-+	dev->phy.duplex = DUPLEX_FULL;
-+	dev->phy.advertising = advertise;
-+	phy->autoneg = AUTONEG_ENABLE;
-+	phy->speed = dev->phy.speed;
-+	phy->duplex = dev->phy.duplex;
-+	phy->advertising = advertise;
-+	return phy_start_aneg(dev->phy_dev);
-+}
-+
-+static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
-+{
-+	struct net_device *ndev = phy->dev;
-+	struct emac_instance *dev = netdev_priv(ndev);
-+
-+	dev->phy.autoneg =  AUTONEG_DISABLE;
-+	dev->phy.speed = speed;
-+	dev->phy.duplex = fd;
-+	phy->autoneg = AUTONEG_DISABLE;
-+	phy->speed = speed;
-+	phy->duplex = fd;
-+	return phy_start_aneg(dev->phy_dev);
-+}
-+
-+static int emac_mdio_poll_link(struct mii_phy *phy)
-+{
-+	struct net_device *ndev = phy->dev;
-+	struct emac_instance *dev = netdev_priv(ndev);
-+	int res;
-+
-+	res = phy_read_status(dev->phy_dev);
-+	if (res) {
-+		dev_err(&dev->ndev->dev, "link update failed (%d).", res);
-+		return ethtool_op_get_link(ndev);
-+	}
-+
-+	return dev->phy_dev->link;
-+}
-+
-+static int emac_mdio_read_link(struct mii_phy *phy)
-+{
-+	struct net_device *ndev = phy->dev;
-+	struct emac_instance *dev = netdev_priv(ndev);
-+	int res;
-+
-+	res = phy_read_status(dev->phy_dev);
-+	if (res)
-+		return res;
-+
-+	dev->phy.speed = phy->speed;
-+	dev->phy.duplex = phy->duplex;
-+	dev->phy.pause = phy->pause;
-+	dev->phy.asym_pause = phy->asym_pause;
-+	return 0;
-+}
-+
-+static int emac_mdio_init_phy(struct mii_phy *phy)
-+{
-+	struct net_device *ndev = phy->dev;
-+	struct emac_instance *dev = netdev_priv(ndev);
-+
-+	phy_start(dev->phy_dev);
-+	dev->phy.autoneg = phy->autoneg;
-+	dev->phy.speed = phy->speed;
-+	dev->phy.duplex = phy->duplex;
-+	dev->phy.advertising = phy->advertising;
-+	dev->phy.pause = phy->pause;
-+	dev->phy.asym_pause = phy->asym_pause;
-+
-+	return phy_init_hw(dev->phy_dev);
-+}
-+
-+static const struct mii_phy_ops emac_dt_mdio_phy_ops = {
-+	.init		= emac_mdio_init_phy,
-+	.setup_aneg	= emac_mdio_setup_aneg,
-+	.setup_forced	= emac_mdio_setup_forced,
-+	.poll_link	= emac_mdio_poll_link,
-+	.read_link	= emac_mdio_read_link,
-+};
-+
-+static void emac_dt_phy_mdio_cleanup(struct emac_instance *dev)
-+{
-+	if (dev->mii_bus) {
-+		if (dev->mii_bus->state == MDIOBUS_REGISTERED)
-+			mdiobus_unregister(dev->mii_bus);
-+		mdiobus_free(dev->mii_bus);
-+		dev->mii_bus = NULL;
-+	}
-+	kfree(dev->phy.def);
-+	dev->phy.def = NULL;
-+}
-+
-+static int emac_dt_mdio_probe(struct emac_instance *dev)
-+{
-+	struct device_node *mii_np;
-+	int res;
-+
-+	mii_np = of_get_child_by_name(dev->ofdev->dev.of_node, "mdio");
-+	if (!mii_np) {
-+		dev_err(&dev->ndev->dev, "no mdio definition found.");
-+		return -ENODEV;
-+	}
-+
-+	if (!of_device_is_available(mii_np)) {
-+		res = 1;
-+		goto err_put_node;
-+	}
-+
-+	dev->mii_bus = mdiobus_alloc();
-+	if (!dev->mii_bus) {
-+		res = -ENOMEM;
-+		goto err_cleanup_mdio;
-+	}
-+
-+	dev->mii_bus->priv = dev->ndev;
-+	dev->mii_bus->parent = dev->ndev->dev.parent;
-+	dev->mii_bus->name = "emac_mdio";
-+	dev->mii_bus->read = &emac_mii_bus_read;
-+	dev->mii_bus->write = &emac_mii_bus_write;
-+	dev->mii_bus->reset = &emac_mii_bus_reset;
-+	snprintf(dev->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev->mii_bus->name);
-+
-+	res = of_mdiobus_register(dev->mii_bus, mii_np);
-+	if (res) {
-+		dev_err(&dev->ndev->dev, "cannot register MDIO bus %s (%d)",
-+			dev->mii_bus->name, res);
-+		goto err_cleanup_mdio;
-+	}
-+	of_node_put(mii_np);
-+	return 0;
-+
-+ err_cleanup_mdio:
-+	emac_dt_phy_mdio_cleanup(dev);
-+ err_put_node:
-+	of_node_put(mii_np);
-+	return res;
-+}
-+
-+static int emac_dt_phy_probe(struct emac_instance *dev,
-+			     struct device_node *phy_handle)
-+{
-+	u32 phy_flags = 0;
-+	int res;
-+
-+	res = of_property_read_u32(phy_handle, "phy-flags", &phy_flags);
-+	if (res < 0 && res != -EINVAL)
-+		return res;
-+
-+	dev->phy.def = kzalloc(sizeof(*dev->phy.def), GFP_KERNEL);
-+	if (!dev->phy.def)
-+		return -ENOMEM;
-+
-+	dev->phy_dev = of_phy_connect(dev->ndev, phy_handle,
-+				      &emac_adjust_link, phy_flags,
-+				      PHY_INTERFACE_MODE_RGMII);
-+	if (!dev->phy_dev) {
-+		dev_err(&dev->ndev->dev, "failed to connect to PHY.");
-+		kfree(dev->phy.dev);
-+		dev->phy.dev = NULL;
-+		return -ENODEV;
-+	}
-+
-+	dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
-+	dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
-+	dev->phy.def->name = dev->phy_dev->drv->name;
-+	dev->phy.def->ops = &emac_dt_mdio_phy_ops;
-+	dev->phy.features = dev->phy_dev->supported;
-+	dev->phy.address = dev->phy_dev->addr;
-+	dev->phy.mode = dev->phy_dev->interface;
-+	return 0;
-+}
-+
-+static int emac_probe_dt_phy(struct emac_instance *dev)
-+{
-+	struct device_node *np = dev->ofdev->dev.of_node;
-+	struct device_node *phy_handle;
-+	int res = 0;
-+
-+	phy_handle = of_parse_phandle(np, "phy-handle", 0);
-+
-+	if (phy_handle) {
-+		res = emac_dt_mdio_probe(dev);
-+		if (res)
-+			goto out;
-+
-+		res = emac_dt_phy_probe(dev, phy_handle);
-+		if (res) {
-+			emac_dt_phy_mdio_cleanup(dev);
-+			goto out;
-+		}
-+
-+		return 1;
-+	}
-+
-+ out:
-+	of_node_put(phy_handle);
-+	/* if no phy device was specifie in the device tree, then we fallback
-+	 * to the old emac_phy.c probe code for compatibility reasons.
-+	 */
-+	return res;
-+}
-+
- static int emac_init_phy(struct emac_instance *dev)
- {
- 	struct device_node *np = dev->ofdev->dev.of_node;
-@@ -2462,6 +2703,18 @@ static int emac_init_phy(struct emac_ins
- 
- 	emac_configure(dev);
- 
-+	if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
-+		int res = emac_probe_dt_phy(dev);
-+
-+		if (res == 1)
-+			goto init_phy;
-+		if (res < 0)
-+			dev_err(&dev->ndev->dev, "failed to attach dt phy (%d).",
-+				res);
-+
-+		/* continue with old code */
-+	}
-+
- 	if (dev->phy_address != 0xffffffff)
- 		phy_map = ~(1 << dev->phy_address);
- 
-@@ -2489,6 +2742,7 @@ static int emac_init_phy(struct emac_ins
- 		return -ENXIO;
- 	}
- 
-+ init_phy:
- 	/* Init PHY */
- 	if (dev->phy.def->ops->init)
- 		dev->phy.def->ops->init(&dev->phy);
-@@ -2907,6 +3161,8 @@ static int emac_probe(struct platform_de
- 	/* I have a bad feeling about this ... */
- 
-  err_detach_tah:
-+	emac_dt_phy_mdio_cleanup(dev);
-+
- 	if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
- 		tah_detach(dev->tah_dev, dev->tah_port);
-  err_detach_rgmii:
-@@ -2957,6 +3213,11 @@ static int emac_remove(struct platform_d
- 	if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
- 		zmii_detach(dev->zmii_dev, dev->zmii_port);
- 
-+	if (dev->phy_dev)
-+		phy_disconnect(dev->phy_dev);
-+
-+	emac_dt_phy_mdio_cleanup(dev);
-+
- 	busy_phy_map &= ~(1 << dev->phy.address);
- 	DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
- 
---- a/drivers/net/ethernet/ibm/emac/core.h
-+++ b/drivers/net/ethernet/ibm/emac/core.h
-@@ -199,6 +199,10 @@ struct emac_instance {
- 	struct emac_instance		*mdio_instance;
- 	struct mutex			mdio_lock;
- 
-+	/* Device-tree based phy configuration */
-+	struct mii_bus			*mii_bus;
-+	struct phy_device		*phy_dev;
-+
- 	/* ZMII infos if any */
- 	u32				zmii_ph;
- 	u32				zmii_port;
diff --git a/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
deleted file mode 100644
index 5d63ddd429..0000000000
--- a/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
+++ /dev/null
@@ -1,545 +0,0 @@
-From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 2 Jun 2016 00:48:46 +0200
-Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
- w/o ROM
-
-This patch adds a firmware loader for the uPD720201K8-711-BAC-A
-and uPD720202K8-711-BAA-A variant. Both of these chips are listed
-in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
-devices which need the firmware loader on page 2 in order to
-work as they "do not support the External ROM".
-
-The "Firmware Download Sequence" is describe in chapter
-"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
-
-The firmware "K2013080.mem" is available from a USB3.0 Host to
-PCIe Adapter (PP2U-E card) "Firmware download" archive. An
-alternative version can be sourced from Netgear's WNDR4700 GPL
-archives.
-
-The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
-(2012-06-15) state that the firmware is for the following devices:
- - uPD720201 ES 2.0 sample whose revision ID is 2.
- - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-
-If someone from Renesas is listening: It would be great, if these
-firmwares could be added to linux-firmware.git.
-
-Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
----
- drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 492 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -24,6 +24,8 @@
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/acpi.h>
-+#include <linux/firmware.h>
-+#include <asm/unaligned.h>
- 
- #include "xhci.h"
- #include "xhci-trace.h"
-@@ -218,6 +220,458 @@ static void xhci_pme_acpi_rtd3_enable(st
- static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
- #endif /* CONFIG_ACPI */
- 
-+static const struct renesas_fw_entry {
-+	const char *firmware_name;
-+	u16 device;
-+	u8 revision;
-+	u16 expected_version;
-+} renesas_fw_table[] = {
-+	/*
-+	 * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
-+	 * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
-+	 * need the software loader.
-+	 *
-+	 * PP2U/ReleaseNote_USB3-201-202-FW.txt:
-+	 *
-+	 * Note: This firmware is for the following devices.
-+	 *  - uPD720201 ES 2.0 sample whose revision ID is 2.
-+	 *  - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
-+	 *  - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-+	 */
-+	{ "K2013080.mem", 0x0014, 0x02, 0x2013 },
-+	{ "K2013080.mem", 0x0014, 0x03, 0x2013 },
-+	{ "K2013080.mem", 0x0015, 0x02, 0x2013 },
-+};
-+
-+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
-+{
-+	const struct renesas_fw_entry *entry;
-+	size_t i;
-+
-+	/* This loader will only work with a RENESAS device. */
-+	if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
-+		return NULL;
-+
-+	for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
-+		entry = &renesas_fw_table[i];
-+		if (entry->device == dev->device &&
-+		    entry->revision == dev->revision)
-+			return entry;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int renesas_fw_download_image(struct pci_dev *dev,
-+				     const u32 *fw,
-+				     size_t step)
-+{
-+	size_t i;
-+	int err;
-+	u8 fw_status;
-+	bool data0_or_data1;
-+
-+	/*
-+	 * The hardware does alternate between two 32-bit pages.
-+	 * (This is because each row of the firmware is 8 bytes).
-+	 *
-+	 * for even steps we use DATA0, for odd steps DATA1.
-+	 */
-+	data0_or_data1 = (step & 1) == 1;
-+
-+	/* step+1. Read "Set DATAX" and confirm it is cleared. */
-+	for (i = 0; i < 10000; i++) {
-+		err = pci_read_config_byte(dev, 0xF5, &fw_status);
-+		if (err)
-+			return pcibios_err_to_errno(err);
-+		if (!(fw_status & BIT(data0_or_data1)))
-+			break;
-+
-+		udelay(1);
-+	}
-+	if (i == 10000)
-+		return -ETIMEDOUT;
-+
-+	/*
-+	 * step+2. Write FW data to "DATAX".
-+	 * "LSB is left" => force little endian
-+	 */
-+	err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
-+				     (__force u32) cpu_to_le32(fw[step]));
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	udelay(100);
-+
-+	/* step+3. Set "Set DATAX". */
-+	err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	return 0;
-+}
-+
-+static int renesas_fw_verify(struct pci_dev *dev,
-+			     const void *fw_data,
-+			     size_t length)
-+{
-+	const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
-+	u16 fw_version_pointer;
-+	u16 fw_version;
-+
-+	if (!entry)
-+		return -EINVAL;
-+
-+	/*
-+	 * The Firmware's Data Format is describe in
-+	 * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
-+	 */
-+
-+	/* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
-+	if (length % 8 != 0) {
-+		dev_err(&dev->dev, "firmware size is not a multipe of 8.");
-+		return -EINVAL;
-+	}
-+
-+	/*
-+	 * The bootrom chips of the big brother have sizes up to 64k, let's
-+	 * assume that's the biggest the firmware can get.
-+	 */
-+	if (length < 0x1000 || length >= 0x10000) {
-+		dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
-+			length);
-+		return -EINVAL;
-+	}
-+
-+	/* The First 2 bytes are fixed value (55aa). "LSB on Left" */
-+	if (get_unaligned_le16(fw_data) != 0x55aa) {
-+		dev_err(&dev->dev, "no valid firmware header found.");
-+		return -EINVAL;
-+	}
-+
-+	/* verify the firmware version position and print it. */
-+	fw_version_pointer = get_unaligned_le16(fw_data + 4);
-+	if (fw_version_pointer + 2 >= length) {
-+		dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
-+		return -EINVAL;
-+	}
-+
-+	fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
-+	dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
-+
-+	if (fw_version != entry->expected_version) {
-+		dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
-+			 entry->expected_version);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int renesas_fw_check_running(struct pci_dev *pdev)
-+{
-+	int err;
-+	u8 fw_state;
-+
-+	/*
-+	 * Test if the device is actually needing the firmware. As most
-+	 * BIOSes will initialize the device for us. If the device is
-+	 * initialized.
-+	 */
-+	err = pci_read_config_byte(pdev, 0xF4, &fw_state);
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	/*
-+	 * Check if "FW Download Lock" is locked. If it is and the FW is
-+	 * ready we can simply continue. If the FW is not ready, we have
-+	 * to give up.
-+	 */
-+	if (fw_state & BIT(1)) {
-+		dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
-+
-+		if (fw_state & BIT(4))
-+			return 0;
-+
-+		dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
-+		return -EIO;
-+	}
-+
-+	/*
-+	 * Check if "FW Download Enable" is set. If someone (us?) tampered
-+	 * with it and it can't be resetted, we have to give up too... and
-+	 * ask for a forgiveness and a reboot.
-+	 */
-+	if (fw_state & BIT(0)) {
-+		dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
-+		return -EIO;
-+	}
-+
-+	/* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
-+	switch ((fw_state & 0x70)) {
-+	case 0: /* No result yet */
-+		dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
-+
-+		/* tell the caller, that this device needs the firmware. */
-+		return 1;
-+
-+	case BIT(4): /* Success, device should be working. */
-+		dev_dbg(&pdev->dev, "FW is ready.");
-+		return 0;
-+
-+	case BIT(5): /* Error State */
-+		dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
-+		return -ENODEV;
-+
-+	default: /* All other states are marked as "Reserved states" */
-+		dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
-+			(fw_state & 0x70) >> 4);
-+		return -EINVAL;
-+	}
-+}
-+
-+static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
-+{
-+#if 0
-+	u32 val;
-+
-+	/*
-+	 * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
-+	 * 'RUN/STOP' of USBCMD Register is set"
-+	 */
-+	val = readl(hcd->regs + 0x20);
-+	if (val & BIT(0)) {
-+		dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
-+		return -EBUSY;
-+	}
-+#endif
-+	return 0;
-+}
-+
-+static int renesas_fw_download(struct pci_dev *pdev,
-+	const struct firmware *fw, unsigned int retry_counter)
-+{
-+	const u32 *fw_data = (const u32 *) fw->data;
-+	size_t i;
-+	int err;
-+	u8 fw_status;
-+
-+	/*
-+	 * For more information and the big picture: please look at the
-+	 * "Firmware Download Sequence" in "7.1 FW Download Interface"
-+	 * of R19UH0078EJ0500 Rev.5.00 page 131
-+	 */
-+	err = renesas_hw_check_run_stop_busy(pdev);
-+	if (err)
-+		return err;
-+
-+	/*
-+	 * 0. Set "FW Download Enable" bit in the
-+	 * "FW Download Control & Status Register" at 0xF4
-+	 */
-+	err = pci_write_config_byte(pdev, 0xF4, BIT(0));
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	/* 1 - 10 follow one step after the other. */
-+	for (i = 0; i < fw->size / 4; i++) {
-+		err = renesas_fw_download_image(pdev, fw_data, i);
-+		if (err) {
-+			dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
-+				 i, i * 4, err);
-+			return err;
-+		}
-+	}
-+
-+	/*
-+	 * This sequence continues until the last data is written to
-+	 * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
-+	 * is cleared by the hardware beforehand.
-+	 */
-+	for (i = 0; i < 10000; i++) {
-+		err = pci_read_config_byte(pdev, 0xF5, &fw_status);
-+		if (err)
-+			return pcibios_err_to_errno(err);
-+		if (!(fw_status & (BIT(0) | BIT(1))))
-+			break;
-+
-+		udelay(1);
-+	}
-+	if (i == 10000)
-+		dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
-+
-+	/*
-+	 * 11. After finishing writing the last data of FW, the
-+	 * System Software must clear "FW Download Enable"
-+	 */
-+	err = pci_write_config_byte(pdev, 0xF4, 0);
-+	if (err)
-+		return pcibios_err_to_errno(err);
-+
-+	/* 12. Read "Result Code" and confirm it is good. */
-+	for (i = 0; i < 10000; i++) {
-+		err = pci_read_config_byte(pdev, 0xF4, &fw_status);
-+		if (err)
-+			return pcibios_err_to_errno(err);
-+		if (fw_status & BIT(4))
-+			break;
-+
-+		udelay(1);
-+	}
-+	if (i == 10000) {
-+		/* Timed out / Error - let's see if we can fix this */
-+		err = renesas_fw_check_running(pdev);
-+		switch (err) {
-+		case 0: /*
-+			 * we shouldn't end up here.
-+			 * maybe it took a little bit longer.
-+			 * But all should be well?
-+			 */
-+			break;
-+
-+		case 1: /* (No result yet? - we can try to retry) */
-+			if (retry_counter < 10) {
-+				retry_counter++;
-+				dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
-+					  retry_counter);
-+				return renesas_fw_download(pdev, fw,
-+							   retry_counter);
-+			}
-+			return -ETIMEDOUT;
-+
-+		default:
-+			return err;
-+		}
-+	}
-+	/*
-+	 * Optional last step: Engage Firmware Lock
-+	 *
-+	 * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
-+	 * if (err)
-+	 *	return pcibios_err_to_errno(err);
-+	 */
-+
-+	return 0;
-+}
-+
-+struct renesas_fw_ctx {
-+	struct pci_dev *pdev;
-+	const struct pci_device_id *id;
-+	bool resume;
-+};
-+
-+static int xhci_pci_probe(struct pci_dev *pdev,
-+			  const struct pci_device_id *id);
-+
-+static void renesas_fw_callback(const struct firmware *fw,
-+				void *context)
-+{
-+	struct renesas_fw_ctx *ctx = context;
-+	struct pci_dev *pdev = ctx->pdev;
-+	struct device *parent = pdev->dev.parent;
-+	int err = -ENOENT;
-+
-+	if (fw) {
-+		err = renesas_fw_verify(pdev, fw->data, fw->size);
-+		if (!err) {
-+			err = renesas_fw_download(pdev, fw, 0);
-+			release_firmware(fw);
-+			if (!err) {
-+				if (ctx->resume)
-+					return;
-+
-+				err = xhci_pci_probe(pdev, ctx->id);
-+				if (!err) {
-+					/* everything worked */
-+					devm_kfree(&pdev->dev, ctx);
-+					return;
-+				}
-+
-+				/* in case of an error - fall through */
-+			} else {
-+				dev_err(&pdev->dev, "firmware failed to download (%d).",
-+					err);
-+			}
-+		}
-+	} else {
-+		dev_err(&pdev->dev, "firmware failed to load (%d).", err);
-+	}
-+
-+	dev_info(&pdev->dev, "Unloading driver");
-+
-+	if (parent)
-+		device_lock(parent);
-+
-+	device_release_driver(&pdev->dev);
-+
-+	if (parent)
-+		device_unlock(parent);
-+
-+	pci_dev_put(pdev);
-+}
-+
-+static int renesas_fw_alive_check(struct pci_dev *pdev)
-+{
-+	const struct renesas_fw_entry *entry;
-+	int err;
-+
-+	/* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+	entry = renesas_needs_fw_dl(pdev);
-+	if (!entry)
-+		return 0;
-+
-+	err = renesas_fw_check_running(pdev);
-+	/* Also go ahead, if the firmware is running */
-+	if (err == 0)
-+		return 0;
-+
-+	/* At this point, we can be sure that the FW isn't ready. */
-+	return err;
-+}
-+
-+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
-+				     const struct pci_device_id *id,
-+				     bool do_resume)
-+{
-+	const struct renesas_fw_entry *entry;
-+	struct renesas_fw_ctx *ctx;
-+	int err;
-+
-+	/* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+	entry = renesas_needs_fw_dl(pdev);
-+	if (!entry)
-+		return 0;
-+
-+	err = renesas_fw_check_running(pdev);
-+	/* Continue ahead, if the firmware is already running. */
-+	if (err == 0)
-+		return 0;
-+
-+	if (err != 1)
-+		return err;
-+
-+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
-+	if (!ctx)
-+		return -ENOMEM;
-+	ctx->pdev = pdev;
-+	ctx->resume = do_resume;
-+	ctx->id = id;
-+
-+	pci_dev_get(pdev);
-+	err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
-+		&pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
-+	if (err) {
-+		pci_dev_put(pdev);
-+		return err;
-+	}
-+
-+	/*
-+	 * The renesas_fw_callback() callback will continue the probe
-+	 * process, once it aquires the firmware.
-+	 */
-+	return 1;
-+}
-+
- /* called during probe() after chip reset completes */
- static int xhci_pci_setup(struct usb_hcd *hcd)
- {
-@@ -257,6 +711,22 @@ static int xhci_pci_probe(struct pci_dev
- 	struct hc_driver *driver;
- 	struct usb_hcd *hcd;
- 
-+	/*
-+	 * Check if this device is a RENESAS uPD720201/2 device.
-+	 * Otherwise, we can continue with xhci_pci_probe as usual.
-+	 */
-+	retval = renesas_fw_download_to_hw(dev, id, false);
-+	switch (retval) {
-+	case 0:
-+		break;
-+
-+	case 1: /* let it load the firmware and recontinue the probe. */
-+		return 0;
-+
-+	default:
-+		return retval;
-+	};
-+
- 	driver = (struct hc_driver *)id->driver_data;
- 
- 	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -314,6 +784,16 @@ static void xhci_pci_remove(struct pci_d
- {
- 	struct xhci_hcd *xhci;
- 
-+	if (renesas_fw_alive_check(dev)) {
-+		/*
-+		 * bail out early, if this was a renesas device w/o FW.
-+		 * Else we might hit the NMI watchdog in xhci_handsake
-+		 * during xhci_reset as part of the driver's unloading.
-+		 * which we forced in the renesas_fw_callback().
-+		 */
-+		return;
-+	}
-+
- 	xhci = hcd_to_xhci(pci_get_drvdata(dev));
- 	xhci->xhc_state |= XHCI_STATE_REMOVING;
- 	if (xhci->shared_hcd) {
diff --git a/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch
deleted file mode 100644
index 5395cabac9..0000000000
--- a/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 23 Jun 2016 20:28:20 +0200
-Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
- uPD720202
-
-The APM82181 does not support MSI-X. When probed, it will
-produce a noisy warning.
-
----
- drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 362 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -185,7 +185,7 @@ static void xhci_pci_quirks(struct devic
- 	}
- 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
- 			pdev->device == 0x0015)
--		xhci->quirks |= XHCI_RESET_ON_RESUME;
-+		xhci->quirks |= XHCI_RESET_ON_RESUME | XHCI_FORCE_MSI;
- 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
- 		xhci->quirks |= XHCI_RESET_ON_RESUME;
- 
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -388,10 +388,14 @@ static int xhci_try_enable_msi(struct us
- 		free_irq(hcd->irq, hcd);
- 	hcd->irq = 0;
- 
--	ret = xhci_setup_msix(xhci);
--	if (ret)
--		/* fall back to msi*/
-+	if (xhci->quirks & XHCI_FORCE_MSI) {
- 		ret = xhci_setup_msi(xhci);
-+	} else {
-+		ret = xhci_setup_msix(xhci);
-+		if (ret)
-+			/* fall back to msi*/
-+			ret = xhci_setup_msi(xhci);
-+	}
- 
- 	if (!ret)
- 		/* hcd->irq is 0, we have MSI */
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1652,6 +1652,7 @@ struct xhci_hcd {
- 	/* support xHCI 0.96 spec USB2 software LPM */
- 	unsigned		sw_lpm_support:1;
- 	/* support xHCI 1.0 spec USB2 hardware LPM */
-+#define XHCI_FORCE_MSI		(1 << 24)
- 	unsigned		hw_lpm_support:1;
- 	/* cached usb2 extened protocol capabilites */
- 	u32                     *ext_caps;
diff --git a/target/linux/apm821xx/patches-4.4/804-usb-dwc2-add-amcc-usb-otg-405ex.patch b/target/linux/apm821xx/patches-4.4/804-usb-dwc2-add-amcc-usb-otg-405ex.patch
deleted file mode 100644
index fb353be225..0000000000
--- a/target/linux/apm821xx/patches-4.4/804-usb-dwc2-add-amcc-usb-otg-405ex.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -115,6 +115,37 @@ static const struct dwc2_core_params par
- 	.hibernation			= -1,
- };
- 
-+static const struct dwc2_core_params params_amcc_dwc_otg = {
-+	.otg_cap			= DWC2_CAP_PARAM_HNP_SRP_CAPABLE,
-+	.otg_ver			= -1,
-+	.dma_enable			= -1,
-+	.dma_desc_enable		= -1,
-+	.speed				= -1,
-+	.enable_dynamic_fifo		= -1,
-+	.en_multiple_tx_fifo		= -1,
-+	.host_rx_fifo_size		= -1,
-+	.host_nperio_tx_fifo_size	= -1,
-+	.host_perio_tx_fifo_size	= -1,
-+	.max_transfer_size		= -1,
-+	.max_packet_count		= -1,
-+	.host_channels			= -1,
-+	.phy_type			= -1,
-+	.phy_utmi_width			= -1,
-+	.phy_ulpi_ddr			= -1,
-+	.phy_ulpi_ext_vbus		= -1,
-+	.i2c_enable			= -1,
-+	.ulpi_fs_ls			= -1,
-+	.host_support_fs_ls_low_power	= -1,
-+	.host_ls_low_power_phy_clk	= -1,
-+	.ts_dline			= -1,
-+	.reload_ctl			= -1,
-+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
-+					  GAHBCFG_HBSTLEN_SHIFT,
-+	.uframe_sched			= -1,
-+	.external_id_pin_ctl		= -1,
-+	.hibernation			= -1,
-+};
-+
- static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
- {
- 	struct platform_device *pdev = to_platform_device(hsotg->dev);
-@@ -307,6 +338,7 @@ static int dwc2_driver_remove(struct pla
- }
- 
- static const struct of_device_id dwc2_of_match_table[] = {
-+	{ .compatible = "amcc,usb-otg-405ex", .data = &params_amcc_dwc_otg },
- 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
- 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
- 	{ .compatible = "snps,dwc2", .data = NULL },
diff --git a/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch b/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch
deleted file mode 100644
index 41f3370008..0000000000
--- a/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch
+++ /dev/null
@@ -1,1027 +0,0 @@
-From 5ea2e152d846bf60901107fefd81a58f792f3bc2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Fri, 10 Jun 2016 03:00:46 +0200
-Subject: [PATCH] hwmon: add driver for Microchip TC654/TC655 PWM fan
- controllers
-
-This patch adds a hwmon driver for the Microchip TC654 and TC655
-Dual SMBus PWM Fan Speed Controllers with Fan Fault detection.
-
-The chip is described in the DS2001734C Spec Document from Microchip.
-It supports:
-	- Shared PWM Fan Drive for two fans
-	- Provides RPM
-	- automatic PWM controller (needs additional
-	  NTC/PTC Thermistors.)
-	- Overtemperature alarm (when using NTC/PTC
-	  Thermistors)
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/hwmon/Kconfig  |  10 +
- drivers/hwmon/Makefile |   1 +
- drivers/hwmon/tc654.c  | 969 +++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 980 insertions(+)
- create mode 100644 drivers/hwmon/tc654.c
-
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -1484,6 +1484,16 @@ config SENSORS_INA2XX
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called ina2xx.
- 
-+config SENSORS_TC654
-+	tristate "Microchip TC654 and TC655"
-+	depends on I2C
-+	help
-+	  If you say yes here you get support for Microchip TC655 and TC654
-+	  Dual PWM Fan Speed Controllers and sensor chips.
-+
-+	  This driver can also be built as a module.  If so, the module
-+	  will be called tc654.
-+
- config SENSORS_TC74
- 	tristate "Microchip TC74"
- 	depends on I2C
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -143,6 +143,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc4
- obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
- obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
- obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
-+obj-$(CONFIG_SENSORS_TC654)	+= tc654.o
- obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
- obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
- obj-$(CONFIG_SENSORS_TMP102)	+= tmp102.o
---- /dev/null
-+++ b/drivers/hwmon/tc654.c
-@@ -0,0 +1,969 @@
-+/*
-+ * tc654.c - Support for Microchip TC654/TC655
-+ * "A Dual SMBus PWM FAN Speed Controllers with Fan Fault Detection"
-+ *
-+ * Copyright (c) 2016 Christian Lamparter <chunkeey@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation version 2 of the License.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * The chip is described in the DS2001734C Spec Document from Microchip.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/jiffies.h>
-+#include <linux/i2c.h>
-+#include <linux/hwmon.h>
-+#include <linux/hwmon-sysfs.h>
-+#include <linux/err.h>
-+#include <linux/mutex.h>
-+#include <linux/thermal.h>
-+
-+/* Hardware definitions */
-+/* 5.1.4 Address Byte stats that TC654/TC655 are fixed at 0x1b */
-+static const unsigned short normal_i2c[] = { 0x1b, I2C_CLIENT_END };
-+
-+enum TC654_REGS {
-+	TC654_REG_RPM1 = 0x00,
-+	TC654_REG_RPM2,
-+	TC654_REG_FAN1_FAULT_THRESH,
-+	TC654_REG_FAN2_FAULT_THRESH,
-+	TC654_REG_CONFIG,
-+	TC654_REG_STATUS,
-+	TC654_REG_DUTY_CYCLE,
-+	TC654_REG_MFR_ID,
-+	TC654_REG_VER_ID,
-+
-+	/* keep last */
-+	__TC654_REG_NUM,
-+};
-+
-+#define TC654_MFR_ID_MICROCHIP		0x84
-+#define TC654_VER_ID			0x00
-+#define TC655_VER_ID			0x01
-+
-+enum TC654_CONTROL_BITS {
-+	TC654_CTRL_SDM		= BIT(0),
-+	TC654_CTRL_F1PPR_S	= 1,
-+	TC654_CTRL_F1PPR_M	= (BIT(1) | BIT(2)),
-+	TC654_CTRL_F2PPR_S	= 3,
-+	TC654_CTRL_F2PPR_M	= (BIT(3) | BIT(4)),
-+	TC654_CTRL_DUTYC	= BIT(5),
-+	TC654_CTRL_RES		= BIT(6),
-+	TC654_CTRL_FFCLR	= BIT(7),
-+};
-+
-+enum TC654_STATUS_BITS {
-+	TC654_STATUS_F1F	= BIT(0),
-+	TC654_STATUS_F2F	= BIT(1),
-+	TC654_STATUS_VSTAT	= BIT(2),
-+	TC654_STATUS_R1CO	= BIT(3),
-+	TC654_STATUS_R2CO	= BIT(4),
-+	TC654_STATUS_OTF	= BIT(5),
-+};
-+
-+enum TC654_FAN {
-+	TC654_FAN1 = 0,
-+	TC654_FAN2,
-+
-+	/* keep last */
-+	__NUM_TC654_FAN,
-+};
-+
-+enum TC654_FAN_MODE {
-+	TC654_PWM_OFF,	/* Shutdown Mode - switch of both fans */
-+	TC654_PWM_VIN,	/* Fans will be controlled via V_in analog input pin */
-+	TC654_PWM_3000,	/* sets fans to 30% duty cycle */
-+	TC654_PWM_3467,
-+	TC654_PWM_3933, /* default case - if V_in pin is open */
-+	TC654_PWM_4400,
-+	TC654_PWM_4867,
-+	TC654_PWM_5333,
-+	TC654_PWM_5800,
-+	TC654_PWM_6267,
-+	TC654_PWM_6733,
-+	TC654_PWM_7200,
-+	TC654_PWM_7667,
-+	TC654_PWM_8133,
-+	TC654_PWM_8600,
-+	TC654_PWM_9067,
-+	TC654_PWM_9533,
-+	TC654_PWM_10000, /* sets fans to 100% duty cycle */
-+};
-+
-+enum TC654_ALARMS {
-+	TC654_ALARM_FAN1_FAULT,
-+	TC654_ALARM_FAN2_FAULT,
-+	TC654_ALARM_FAN1_COUNTER_OVERFLOW,
-+	TC654_ALARM_FAN2_COUNTER_OVERFLOW,
-+	TC654_ALARM_OVER_TEMPERATURE,
-+
-+	/* KEEP LAST */
-+	__NUM_TC654_ALARMS,
-+};
-+
-+static const struct pwm_table_entry {
-+	u8 min;
-+	enum TC654_FAN_MODE mode;
-+} pwm_table[] = {
-+	{  0, TC654_PWM_OFF  },
-+	{  1, TC654_PWM_3000 },
-+	{ 88, TC654_PWM_3467 },
-+	{101, TC654_PWM_3933 },
-+	{113, TC654_PWM_4400 },
-+	{125, TC654_PWM_4867 },
-+	{137, TC654_PWM_5333 },
-+	{148, TC654_PWM_5800 },
-+	{160, TC654_PWM_6267 },
-+	{172, TC654_PWM_6733 },
-+	{184, TC654_PWM_7200 },
-+	{196, TC654_PWM_7667 },
-+	{208, TC654_PWM_8133 },
-+	{220, TC654_PWM_8600 },
-+	{232, TC654_PWM_9067 },
-+	{244, TC654_PWM_9533 },
-+	{255, TC654_PWM_10000 },
-+};
-+
-+/* driver context */
-+struct tc654 {
-+	struct i2c_client	*client;
-+
-+	struct mutex		update_lock;
-+
-+	unsigned long		last_updated;	/* in jiffies */
-+	u8			cached_regs[__TC654_REG_NUM];
-+
-+	bool			valid;	/* monitored registers are valid */
-+	u16			fan_input[__NUM_TC654_FAN];
-+	bool			alarms[__NUM_TC654_ALARMS];
-+	bool			vin_status;
-+	bool			pwm_manual;
-+
-+	/* optional cooling device */
-+	struct thermal_cooling_device *cdev;
-+};
-+
-+/* hardware accessors and functions */
-+static int read_tc(struct tc654 *tc, u8 reg)
-+{
-+	s32 status;
-+
-+	if (reg <= TC654_REG_VER_ID) {
-+		/* Table 6.1 states that all registers are readable */
-+		status = i2c_smbus_read_byte_data(tc->client, reg);
-+	} else
-+		status = -EINVAL;
-+
-+	if (status < 0) {
-+		dev_warn(&tc->client->dev, "can't read register 0x%02x due to error (%d)",
-+			 reg, status);
-+	} else {
-+		tc->cached_regs[reg] = status;
-+	}
-+
-+	return status;
-+}
-+
-+static int write_tc(struct tc654 *tc, u8 i2c_reg, u8 val)
-+{
-+	s32 status;
-+
-+	/*
-+	 * Table 6.1 states that both fan threshold registers,
-+	 * the Config and Duty Cycle are writeable.
-+	 */
-+	switch (i2c_reg) {
-+	case TC654_REG_FAN1_FAULT_THRESH:
-+	case TC654_REG_FAN2_FAULT_THRESH:
-+	case TC654_REG_DUTY_CYCLE:
-+	case TC654_REG_CONFIG:
-+		status = i2c_smbus_write_byte_data(tc->client, i2c_reg, val);
-+		break;
-+
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	if (status < 0) {
-+		dev_warn(&tc->client->dev, "can't write register 0x%02x with value 0x%02x due to error (%d)",
-+			 i2c_reg, val, status);
-+	} else {
-+		tc->cached_regs[i2c_reg] = val;
-+	}
-+
-+	return status;
-+}
-+
-+static int mod_config(struct tc654 *tc, u8 set, u8 clear)
-+{
-+	u8 val = 0;
-+
-+	/* a bit can't be set and cleared on the same time. */
-+	if (set & clear)
-+		return -EINVAL;
-+
-+	/* invalidate data to force re-read from hardware */
-+	tc->valid = false;
-+	val = (tc->cached_regs[TC654_REG_CONFIG] | set) & (~clear);
-+	return write_tc(tc, TC654_REG_CONFIG, val);
-+}
-+
-+static int read_fan_rpm(struct tc654 *tc, enum TC654_FAN fan)
-+{
-+	int ret;
-+
-+	/* 6.1 RPM-OUTPUT1 and RPM-OUTPUT2 registers */
-+	ret = read_tc(tc, fan == TC654_FAN1 ? TC654_REG_RPM1 : TC654_REG_RPM2);
-+	if (ret < 0)
-+		return ret;
-+
-+	/*
-+	 * The Resolution Selection Bit in 6.3 CONFIGURATION REGISTER
-+	 * is needed to convert the raw value to the RPM.
-+	 * 0 = RPM1 and RPM2 use (8-Bit) resolution => * 50 RPM
-+	 * 1 = RPM1 and RPM2 use (9-Bit) resolution => * 25 RPM
-+	 */
-+	return ret * (25 <<
-+		!(tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_RES));
-+}
-+
-+static int write_fan_fault_thresh(struct tc654 *tc, enum TC654_FAN fan,
-+				  u16 rpm)
-+{
-+	u8 converted_rpm;
-+
-+	if (rpm > 12750)
-+		return -EINVAL;
-+
-+	/*
-+	 * 6.2 FAN_FAULT1 and FAN_FAULT2 Threshold registers
-+	 *
-+	 * Both registers operate in 50 RPM mode exclusively.
-+	 */
-+	converted_rpm = rpm / 50;
-+
-+	/* invalidate data to force re-read from hardware */
-+	tc->valid = false;
-+	return write_tc(tc, fan == TC654_FAN1 ? TC654_REG_FAN1_FAULT_THRESH :
-+		TC654_REG_FAN2_FAULT_THRESH, converted_rpm);
-+}
-+
-+
-+static int read_fan_fault_thresh(struct tc654 *tc, enum TC654_FAN fan)
-+{
-+	/*
-+	 * 6.2 FAN_FAULT1 and FAN_FAULT2 Threshold registers
-+	 *
-+	 * Both registers operate in 50 RPM mode exclusively.
-+	 */
-+	return read_tc(tc, fan == TC654_FAN1 ? TC654_REG_FAN1_FAULT_THRESH :
-+		TC654_REG_FAN2_FAULT_THRESH) * 50;
-+}
-+
-+static enum TC654_FAN_MODE get_fan_mode(struct tc654 *tc)
-+{
-+	if (tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_SDM) {
-+		return TC654_PWM_OFF;
-+	} else if (tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_DUTYC) {
-+		return TC654_PWM_3000 + tc->cached_regs[TC654_REG_DUTY_CYCLE];
-+	} else if (tc->vin_status == 0)
-+		return TC654_PWM_VIN;
-+
-+	return -EINVAL;
-+}
-+
-+static int write_fan_mode(struct tc654 *tc, enum TC654_FAN_MODE mode)
-+{
-+	int err;
-+	u8 pwm_mode;
-+	bool in_sdm;
-+
-+	in_sdm = !!(tc->cached_regs[TC654_REG_CONFIG] &
-+		TC654_CTRL_SDM);
-+
-+	switch (mode) {
-+	case TC654_PWM_OFF:
-+		if (in_sdm)
-+			return 0;
-+
-+		/* Enter Shutdown Mode - Switches off all fans */
-+		err = mod_config(tc, TC654_CTRL_SDM, TC654_CTRL_DUTYC);
-+		if (err)
-+			return err;
-+
-+		return 0;
-+
-+	case TC654_PWM_VIN:
-+		if (tc->vin_status) {
-+			dev_err(&tc->client->dev,
-+				"V_in pin is open, can't enable automatic mode.");
-+			return -EINVAL;
-+		}
-+
-+		err = mod_config(tc, 0, TC654_CTRL_SDM | TC654_CTRL_DUTYC);
-+		if (err)
-+			return err;
-+
-+		tc->pwm_manual = false;
-+		return 0;
-+
-+	case TC654_PWM_3000:
-+	case TC654_PWM_3467:
-+	case TC654_PWM_3933:
-+	case TC654_PWM_4400:
-+	case TC654_PWM_4867:
-+	case TC654_PWM_5333:
-+	case TC654_PWM_5800:
-+	case TC654_PWM_6267:
-+	case TC654_PWM_6733:
-+	case TC654_PWM_7200:
-+	case TC654_PWM_7667:
-+	case TC654_PWM_8133:
-+	case TC654_PWM_8600:
-+	case TC654_PWM_9067:
-+	case TC654_PWM_9533:
-+	case TC654_PWM_10000:
-+		pwm_mode = mode - TC654_PWM_3000;
-+		if (!in_sdm) {
-+			err = write_tc(tc, TC654_REG_DUTY_CYCLE, pwm_mode);
-+			if (err)
-+				return err;
-+		}
-+
-+		err = mod_config(tc, TC654_CTRL_DUTYC, TC654_CTRL_SDM);
-+		if (err)
-+			return err;
-+
-+		tc->pwm_manual = true;
-+
-+		if (in_sdm) {
-+			/*
-+			 * In case the TC654/TC655 was in SDM mode, the write
-+			 * above into the TC654_REG_DUTY_CYCLE register will
-+			 * have no effect because the chip was switched off.
-+			 *
-+			 * Note: The TC654/TC655 have a special "power-on"
-+			 * feature where the PWM will be forced to 100% for
-+			 * one full second in order to spin-up a resting fan.
-+			 */
-+			err = write_tc(tc, TC654_REG_DUTY_CYCLE, pwm_mode);
-+			if (err)
-+				return err;
-+		}
-+
-+		return 0;
-+
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static struct tc654 *tc654_update_device(struct device *dev)
-+{
-+	struct tc654 *tc = dev_get_drvdata(dev);
-+
-+	mutex_lock(&tc->update_lock);
-+
-+	/*
-+	 * In Chapter "1.0 Electrical Characteristics",
-+	 * the "Fault Output Response Time" is specified as 2.4 seconds.
-+	 */
-+	if (time_after(jiffies, tc->last_updated + 2 * HZ + (HZ * 2) / 5)
-+	    || !tc->valid) {
-+		size_t i;
-+		int ret;
-+		bool alarm_triggered;
-+
-+		tc->valid = false;
-+
-+		for (i = 0; i < __NUM_TC654_FAN; i++) {
-+			ret = read_fan_rpm(tc, i);
-+			if (ret < 0)
-+				goto out;
-+
-+			tc->fan_input[i] = ret;
-+		}
-+
-+		ret = read_tc(tc, TC654_REG_STATUS);
-+		if (ret < 0)
-+			goto out;
-+
-+		alarm_triggered = !!(ret & (TC654_STATUS_F1F |
-+			TC654_STATUS_F2F | TC654_STATUS_R1CO |
-+			TC654_STATUS_R2CO | TC654_STATUS_OTF));
-+
-+		tc->alarms[TC654_ALARM_FAN1_FAULT] = !!(ret & TC654_STATUS_F1F);
-+		tc->alarms[TC654_ALARM_FAN2_FAULT] = !!(ret & TC654_STATUS_F2F);
-+		tc->alarms[TC654_ALARM_FAN1_COUNTER_OVERFLOW] =
-+			!!(ret & TC654_STATUS_R1CO);
-+		tc->alarms[TC654_ALARM_FAN2_COUNTER_OVERFLOW] =
-+			!!(ret & TC654_STATUS_R2CO);
-+		tc->alarms[TC654_ALARM_OVER_TEMPERATURE] =
-+			!!(ret & TC654_STATUS_OTF);
-+		tc->vin_status = !!(ret & TC654_STATUS_VSTAT);
-+
-+		/*
-+		 * From 4.5 and 6.3
-+		 *
-+		 * ... "If the V_in pin is open when TC654_CTRL_DUTYC is not
-+		 * selected, then V_out duty cycle will default to 39.33%.".
-+		 *
-+		 * and most importantly 6.5:
-+		 * ... "V_in pin is open, the duty cycle will go to the default
-+		 * setting of this register, which is 0010 (39.33%)."
-+		 */
-+		tc->pwm_manual |= tc->vin_status &&
-+			(tc->cached_regs[TC654_REG_CONFIG] &
-+			 TC654_CTRL_DUTYC);
-+
-+		if (alarm_triggered) {
-+			/*
-+			 * as the name implies, this FLAG needs to be
-+			 * set in order to clear the FAN Fault error.
-+			 */
-+			ret = mod_config(tc, TC654_CTRL_FFCLR, 0);
-+			if (ret < 0)
-+				goto out;
-+		}
-+
-+		tc->last_updated = jiffies;
-+		tc->valid = true;
-+	}
-+
-+out:
-+	mutex_unlock(&tc->update_lock);
-+	return tc;
-+}
-+
-+static u8 get_fan_pulse(struct tc654 *tc, enum TC654_FAN fan)
-+{
-+	u8 fan_pulse_mask = fan == TC654_FAN1 ?
-+		TC654_CTRL_F1PPR_M : TC654_CTRL_F2PPR_M;
-+	u8 fan_pulse_shift = fan  == TC654_FAN1 ?
-+		TC654_CTRL_F1PPR_S : TC654_CTRL_F2PPR_S;
-+
-+	return 1 << ((tc->cached_regs[TC654_REG_CONFIG] & fan_pulse_mask) >>
-+		     fan_pulse_shift);
-+}
-+
-+static int
-+set_fan_pulse(struct tc654 *tc, enum TC654_FAN fan, int pulses)
-+{
-+	int old_pulses;
-+	int err;
-+	u8 new_pulse_per_rotation;
-+	u8 fan_pulse_mask = fan == TC654_FAN1 ?
-+		TC654_CTRL_F1PPR_M : TC654_CTRL_F2PPR_M;
-+	u8 fan_pulse_shift = fan  == TC654_FAN1 ?
-+		TC654_CTRL_F1PPR_S : TC654_CTRL_F2PPR_S;
-+
-+	switch (pulses) {
-+	case 1:
-+		new_pulse_per_rotation = 0;
-+		break;
-+	case 2:
-+		new_pulse_per_rotation = 1;
-+		break;
-+	case 4:
-+		new_pulse_per_rotation = 2;
-+		break;
-+	case 8:
-+		new_pulse_per_rotation = 3;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	new_pulse_per_rotation <<= fan_pulse_shift;
-+	new_pulse_per_rotation &= fan_pulse_mask;
-+
-+	old_pulses = tc->cached_regs[TC654_REG_CONFIG];
-+	old_pulses &= fan_pulse_mask;
-+
-+	if (new_pulse_per_rotation == old_pulses)
-+		return 0;
-+
-+	mutex_lock(&tc->update_lock);
-+	err = mod_config(tc, new_pulse_per_rotation,
-+			    old_pulses & (~new_pulse_per_rotation));
-+	mutex_unlock(&tc->update_lock);
-+
-+	/* invalidate RPM data to force re-read from hardware */
-+	tc->valid = false;
-+
-+	return err;
-+}
-+
-+static int get_fan_speed(struct tc654 *tc)
-+{
-+	enum TC654_FAN_MODE mode;
-+	size_t i;
-+
-+	mode = get_fan_mode(tc);
-+	for (i = 0; i < ARRAY_SIZE(pwm_table); i++) {
-+		if (mode == pwm_table[i].mode)
-+			return pwm_table[i].min;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static int set_fan_speed(struct tc654 *tc, int new_value)
-+{
-+	int result;
-+	size_t i;
-+
-+	if (new_value > pwm_table[ARRAY_SIZE(pwm_table) - 1].min ||
-+	    new_value < pwm_table[0].min)
-+		return -EINVAL;
-+
-+	for (i = 0; i < ARRAY_SIZE(pwm_table); i++) {
-+		/* exact match */
-+		if (pwm_table[i].min == new_value)
-+			break;
-+
-+		/* a little bit too big - go with the previous entry */
-+		if (pwm_table[i].min > new_value) {
-+			--i;
-+			break;
-+		}
-+	}
-+
-+	mutex_lock(&tc->update_lock);
-+	result = write_fan_mode(tc, pwm_table[i].mode);
-+	mutex_unlock(&tc->update_lock);
-+	if (result < 0)
-+		return result;
-+
-+	return 0;
-+}
-+
-+/* sysfs */
-+
-+static ssize_t
-+show_fan_input(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = tc654_update_device(dev);
-+	int nr = to_sensor_dev_attr(da)->index;
-+
-+	return sprintf(buf, "%d\n", tc->fan_input[nr]);
-+}
-+
-+static ssize_t
-+show_fan_min(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = dev_get_drvdata(dev);
-+	int nr = to_sensor_dev_attr(da)->index;
-+
-+	return sprintf(buf, "%d\n", read_fan_fault_thresh(tc, nr));
-+}
-+
-+static ssize_t
-+show_fan_min_alarm(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = tc654_update_device(dev);
-+	int nr = to_sensor_dev_attr(da)->index;
-+
-+	return sprintf(buf, "%d\n", nr == TC654_FAN1 ?
-+		       tc->alarms[TC654_ALARM_FAN1_FAULT] :
-+		       tc->alarms[TC654_ALARM_FAN2_FAULT]);
-+}
-+
-+static ssize_t
-+show_fan_max_alarm(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = tc654_update_device(dev);
-+	int nr = to_sensor_dev_attr(da)->index;
-+
-+	return sprintf(buf, "%d\n", nr == TC654_FAN1 ?
-+		       tc->alarms[TC654_ALARM_FAN1_COUNTER_OVERFLOW] :
-+		       tc->alarms[TC654_ALARM_FAN2_COUNTER_OVERFLOW]);
-+}
-+
-+static ssize_t
-+set_fan_min(struct device *dev, struct device_attribute *da,
-+	    const char *buf, size_t count)
-+{
-+	struct tc654 *tc = dev_get_drvdata(dev);
-+	long new_min;
-+	int nr = to_sensor_dev_attr(da)->index;
-+	int old_min = read_fan_fault_thresh(tc, nr);
-+	int status = kstrtol(buf, 10, &new_min);
-+
-+	if (status < 0)
-+		return status;
-+
-+	new_min = (new_min / 50) * 50;
-+	if (new_min == old_min) /* No change */
-+		return count;
-+
-+	if (new_min < 0 || new_min > 12750)
-+		return -EINVAL;
-+
-+	mutex_lock(&tc->update_lock);
-+	status = write_fan_fault_thresh(tc, nr, new_min);
-+	mutex_unlock(&tc->update_lock);
-+	return count;
-+}
-+
-+static ssize_t
-+show_fan_max(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = dev_get_drvdata(dev);
-+	int max_rpm = tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_RES ?
-+		(((1 << 9) - 1) * 25) /* ((2**9) - 1) * 25 RPM */:
-+		(((1 << 8) - 1) * 50) /* ((2**8) - 1) * 50 RPM */;
-+
-+	return sprintf(buf, "%d\n", max_rpm);
-+}
-+
-+static ssize_t
-+show_fan_fault(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = tc654_update_device(dev);
-+	int nr = to_sensor_dev_attr(da)->index;
-+	u8 fan_fault_mask = nr == TC654_FAN1 ?
-+		TC654_STATUS_F1F : TC654_STATUS_F2F;
-+
-+	return sprintf(buf, "%d\n",
-+		!!(tc->cached_regs[TC654_REG_STATUS] & fan_fault_mask));
-+}
-+
-+static ssize_t
-+show_fan_pulses(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = dev_get_drvdata(dev);
-+	int nr = to_sensor_dev_attr(da)->index;
-+
-+	return sprintf(buf, "%d\n", get_fan_pulse(tc, nr));
-+}
-+
-+static ssize_t
-+set_fan_pulses(struct device *dev, struct device_attribute *da,
-+	      const char *buf, size_t count)
-+{
-+	struct tc654 *tc = dev_get_drvdata(dev);
-+	long new_pulse;
-+	int nr = to_sensor_dev_attr(da)->index;
-+	int status = kstrtol(buf, 10, &new_pulse);
-+
-+	if (status < 0)
-+		return status;
-+
-+	status = set_fan_pulse(tc, nr, new_pulse);
-+	if (status < 0)
-+		return status;
-+
-+	return count;
-+}
-+
-+static ssize_t
-+show_pwm_enable(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = tc654_update_device(dev);
-+	int pwm_enabled;
-+
-+	if ((tc->cached_regs[TC654_REG_CONFIG] & TC654_CTRL_SDM) &&
-+	    !tc->pwm_manual) {
-+		pwm_enabled = 0; /* full off */
-+	} else {
-+		if (tc->valid && tc->vin_status == 0)
-+			pwm_enabled = 2; /* automatic fan speed control */
-+
-+		pwm_enabled = 1; /* PWM Mode */
-+	}
-+
-+	return sprintf(buf, "%d\n", pwm_enabled);
-+}
-+
-+static ssize_t
-+set_pwm_enable(struct device *dev, struct device_attribute *da,
-+	       const char *buf, size_t count)
-+{
-+	struct tc654 *tc = dev_get_drvdata(dev);
-+	long new_value;
-+
-+	int result = kstrtol(buf, 10, &new_value);
-+
-+	if (result < 0)
-+		return result;
-+
-+	mutex_lock(&tc->update_lock);
-+	switch (new_value) {
-+	case 0: /* no fan control (i.e. is OFF) */
-+		result = write_fan_mode(tc, TC654_PWM_OFF);
-+		tc->pwm_manual = false;
-+		break;
-+
-+	case 1: /* manual fan control enabled (using pwm) */
-+		result = write_fan_mode(tc, TC654_PWM_10000);
-+		break;
-+
-+	case 2: /* automatic fan speed control enabled */
-+		result = write_fan_mode(tc, TC654_PWM_VIN);
-+		break;
-+
-+	default:
-+		result = -EINVAL;
-+	}
-+
-+	mutex_unlock(&tc->update_lock);
-+	return result < 0 ? result : count;
-+}
-+
-+static ssize_t
-+show_pwm(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = tc654_update_device(dev);
-+	int ret;
-+
-+	ret = get_fan_speed(tc);
-+	if (ret < 0)
-+		return ret;
-+
-+	return sprintf(buf, "%d\n", ret);
-+}
-+
-+static ssize_t
-+set_pwm(struct device *dev, struct device_attribute *da,
-+	const char *buf, size_t count)
-+{
-+	struct tc654 *tc = dev_get_drvdata(dev);
-+	long new_value = -1;
-+	int result = kstrtol(buf, 10, &new_value);
-+
-+	if (result < 0)
-+		return result;
-+
-+	if (new_value < 0 || new_value > INT_MAX)
-+		return -EINVAL;
-+
-+	if (!tc->pwm_manual)
-+		return -EINVAL;
-+
-+	result = set_fan_speed(tc, new_value);
-+	if (result < 0)
-+		return result;
-+
-+	return count;
-+}
-+
-+static ssize_t
-+show_temp_alarm_otf(struct device *dev, struct device_attribute *da, char *buf)
-+{
-+	struct tc654 *tc = tc654_update_device(dev);
-+
-+	return sprintf(buf, "%d\n", tc->alarms[TC654_ALARM_OVER_TEMPERATURE]);
-+}
-+
-+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input,
-+			  NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, show_fan_min,
-+			  set_fan_min, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, show_fan_min_alarm,
-+			  NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_max_alarm, S_IRUGO, show_fan_max_alarm,
-+			  NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO, show_fan_max, NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault,
-+			  NULL, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan1_pulses, S_IRUGO | S_IWUSR, show_fan_pulses,
-+			  set_fan_pulses, TC654_FAN1);
-+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input,
-+			  NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR, show_fan_min,
-+			  set_fan_min, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_max, S_IRUGO, show_fan_max,
-+			  NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_min_alarm, S_IRUGO, show_fan_min_alarm,
-+			  NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_max_alarm, S_IRUGO, show_fan_max_alarm,
-+			  NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault,
-+			  NULL, TC654_FAN2);
-+static SENSOR_DEVICE_ATTR(fan2_pulses, S_IRUGO | S_IWUSR, show_fan_pulses,
-+			  set_fan_pulses, TC654_FAN2);
-+
-+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
-+	set_pwm_enable);
-+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm);
-+
-+static DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_temp_alarm_otf, NULL);
-+
-+/* sensors present on all models */
-+static struct attribute *tc654_attrs[] = {
-+	&sensor_dev_attr_fan1_input.dev_attr.attr,
-+	&sensor_dev_attr_fan1_min.dev_attr.attr,
-+	&sensor_dev_attr_fan1_max.dev_attr.attr,
-+	&sensor_dev_attr_fan1_min_alarm.dev_attr.attr,
-+	&sensor_dev_attr_fan1_max_alarm.dev_attr.attr,
-+	&sensor_dev_attr_fan1_fault.dev_attr.attr,
-+	&sensor_dev_attr_fan1_pulses.dev_attr.attr,
-+	&sensor_dev_attr_fan2_input.dev_attr.attr,
-+	&sensor_dev_attr_fan2_min.dev_attr.attr,
-+	&sensor_dev_attr_fan2_max.dev_attr.attr,
-+	&sensor_dev_attr_fan2_min_alarm.dev_attr.attr,
-+	&sensor_dev_attr_fan2_max_alarm.dev_attr.attr,
-+	&sensor_dev_attr_fan2_fault.dev_attr.attr,
-+	&sensor_dev_attr_fan2_pulses.dev_attr.attr,
-+
-+	&dev_attr_pwm1_enable.attr,
-+	&dev_attr_pwm1.attr,
-+
-+	&dev_attr_temp1_emergency_alarm.attr,
-+	NULL
-+};
-+
-+ATTRIBUTE_GROUPS(tc654);
-+
-+/* cooling device */
-+
-+static int tc654_get_max_state(struct thermal_cooling_device *cdev,
-+			       unsigned long *state)
-+{
-+	*state = 255;
-+	return 0;
-+}
-+
-+static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
-+			       unsigned long *state)
-+{
-+	struct tc654 *tc = cdev->devdata;
-+	int ret;
-+
-+	if (!tc)
-+		return -EINVAL;
-+
-+	ret = get_fan_speed(tc);
-+	if (ret < 0)
-+		return ret;
-+
-+	*state = ret;
-+	return 0;
-+}
-+
-+static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
-+			       unsigned long state)
-+{
-+	struct tc654 *tc = cdev->devdata;
-+
-+	if (!tc)
-+		return -EINVAL;
-+
-+	if (state > INT_MAX)
-+		return -EINVAL;
-+
-+	return set_fan_speed(tc, state);
-+}
-+
-+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
-+	.get_max_state = tc654_get_max_state,
-+	.get_cur_state = tc654_get_cur_state,
-+	.set_cur_state = tc654_set_cur_state,
-+};
-+
-+
-+/* hardware probe and detection */
-+
-+static int
-+tc654_probe(struct i2c_client *client, const struct i2c_device_id *id)
-+{
-+	struct tc654 *tc;
-+	struct device *hwmon_dev;
-+	int ret, i;
-+
-+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+		return -EIO;
-+
-+	tc = devm_kzalloc(&client->dev, sizeof(*tc), GFP_KERNEL);
-+	if (!tc)
-+		return -ENOMEM;
-+
-+	i2c_set_clientdata(client, tc);
-+	tc->client = client;
-+	mutex_init(&tc->update_lock);
-+
-+	/* cache all 8 registers */
-+	for (i = 0; i < __TC654_REG_NUM; i++) {
-+		ret = read_tc(tc, i);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	/* sysfs hooks */
-+	hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
-+							   client->name, tc,
-+							   tc654_groups);
-+	if (IS_ERR(hwmon_dev))
-+		return PTR_ERR(hwmon_dev);
-+
-+#if IS_ENABLED(CONFIG_OF)
-+	/* Optional cooling device register for Device tree platforms */
-+	tc->cdev = thermal_of_cooling_device_register(client->dev.of_node,
-+						      "tc654", tc,
-+						      &tc654_fan_cool_ops);
-+#else /* CONFIG_OF */
-+	/* Optional cooling device register for non Device tree platforms */
-+	tc->cdev = thermal_cooling_device_register("tc654", tc,
-+						   &tc654_fan_cool_ops);
-+#endif /* CONFIG_OF */
-+
-+	dev_info(&client->dev, "%s: sensor '%s'\n",
-+		 dev_name(hwmon_dev), client->name);
-+
-+	return 0;
-+}
-+
-+static const struct i2c_device_id tc654_ids[] = {
-+	{ "tc654", 0, },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(i2c, tc654_ids);
-+
-+/* Return 0 if detection is successful, -ENODEV otherwise */
-+static int
-+tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
-+{
-+	struct i2c_adapter *adapter = new_client->adapter;
-+	int manufacturer, product;
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+		return -ENODEV;
-+
-+	manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
-+	if (manufacturer != TC654_MFR_ID_MICROCHIP)
-+		return -ENODEV;
-+
-+	product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
-+	if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
-+		return -ENODEV;
-+
-+	strlcpy(info->type, "tc654", I2C_NAME_SIZE);
-+	return 0;
-+}
-+
-+static struct i2c_driver tc654_driver = {
-+	.class		= I2C_CLASS_HWMON,
-+	.driver = {
-+		.name	= "tc654",
-+	},
-+	.probe		= tc654_probe,
-+	.id_table	= tc654_ids,
-+	.detect		= tc654_detect,
-+	.address_list	= normal_i2c,
-+};
-+
-+module_i2c_driver(tc654_driver);
-+
-+MODULE_AUTHOR("Christian Lamparter <chunkeey@gmail.com>");
-+MODULE_DESCRIPTION("Microchip TC654/TC655 hwmon driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/apm821xx/patches-4.4/911-hwmon-lm90-split-set-and-show-temp-as-common-codes.patch b/target/linux/apm821xx/patches-4.4/911-hwmon-lm90-split-set-and-show-temp-as-common-codes.patch
deleted file mode 100644
index e450f9045f..0000000000
--- a/target/linux/apm821xx/patches-4.4/911-hwmon-lm90-split-set-and-show-temp-as-common-codes.patch
+++ /dev/null
@@ -1,292 +0,0 @@
-From: Wei Ni <wni@nvidia.com>
-Subject: hwmon: lm90: split set and show temp as common codes
-
-Split set and show temp codes as common functions, so we can use
-it directly when implement linux thermal framework.
-And handle error return value for the lm90_select_remote_channel
-and write_tempx, then set_temp8 and set_temp11 could return it
-to user-space.
-
-Discussed in:
-http://www.spinics.net/lists/linux-tegra/msg14020.html .
-Applied with Jean.
-
-BUG=chrome-os-partner:30834
-TEST=None
-
-Signed-off-by: Wei Ni <wni@nvidia.com>
-Signed-off-by: Jean Delvare <khali@linux-fr.org>
-Reviewed-on: https://chromium-review.googlesource.com/175114
-Tested-by: Wei Ni <wni.nvidia@gmail.com>
-Commit-Queue: Dylan Reid <dgreid@chromium.org>
-Reviewed-by: Dylan Reid <dgreid@chromium.org>
-(cherry picked from commit 614a96decdc7a3784128c9f21c5471367e2c627d)
-Change-Id: Idbe3948812c6737cba94810cd147c29cc527c3cf
-Reviewed-on: https://chromium-review.googlesource.com/212413
-Reviewed-by: Olof Johansson <olofj@chromium.org>
-Commit-Queue: Olof Johansson <olofj@chromium.org>
----
---- a/drivers/hwmon/lm90.c
-+++ b/drivers/hwmon/lm90.c
-@@ -473,20 +473,29 @@ static int lm90_read16(struct i2c_client
-  * various registers have different meanings as a result of selecting a
-  * non-default remote channel.
-  */
--static inline void lm90_select_remote_channel(struct i2c_client *client,
--					      struct lm90_data *data,
--					      int channel)
-+static inline int lm90_select_remote_channel(struct i2c_client *client,
-+					     struct lm90_data *data,
-+					     int channel)
- {
- 	u8 config;
-+	int err;
- 
- 	if (data->kind == max6696) {
- 		lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
- 		config &= ~0x08;
- 		if (channel)
- 			config |= 0x08;
--		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
--					  config);
-+		err = i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
-+						config);
-+		if (err < 0) {
-+			dev_err(&client->dev,
-+				"Failed to select remote channel %d, err %d\n",
-+				channel, err);
-+			return err;
-+		}
- 	}
-+
-+	return 0;
- }
- 
- /*
-@@ -759,29 +768,34 @@ static u16 temp_to_u16_adt7461(struct lm
-  * Sysfs stuff
-  */
- 
--static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
--			  char *buf)
-+static int read_temp8(struct device *dev, int index)
- {
--	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- 	struct lm90_data *data = lm90_update_device(dev);
- 	int temp;
- 
- 	if (data->kind == adt7461 || data->kind == tmp451)
--		temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
-+		temp = temp_from_u8_adt7461(data, data->temp8[index]);
- 	else if (data->kind == max6646)
--		temp = temp_from_u8(data->temp8[attr->index]);
-+		temp = temp_from_u8(data->temp8[index]);
- 	else
--		temp = temp_from_s8(data->temp8[attr->index]);
-+		temp = temp_from_s8(data->temp8[index]);
- 
- 	/* +16 degrees offset for temp2 for the LM99 */
--	if (data->kind == lm99 && attr->index == 3)
-+	if (data->kind == lm99 && index == 3)
- 		temp += 16000;
- 
--	return sprintf(buf, "%d\n", temp);
-+	return temp;
- }
- 
--static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
--			 const char *buf, size_t count)
-+static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
-+			  char *buf)
-+{
-+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+
-+	return sprintf(buf, "%d\n", read_temp8(dev, attr->index));
-+}
-+
-+static int write_temp8(struct device *dev, int index, long val)
- {
- 	static const u8 reg[TEMP8_REG_NUM] = {
- 		LM90_REG_W_LOCAL_LOW,
-@@ -794,60 +808,79 @@ static ssize_t set_temp8(struct device *
- 		MAX6659_REG_W_REMOTE_EMERG,
- 	};
- 
--	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- 	struct lm90_data *data = dev_get_drvdata(dev);
- 	struct i2c_client *client = data->client;
--	int nr = attr->index;
--	long val;
- 	int err;
- 
--	err = kstrtol(buf, 10, &val);
--	if (err < 0)
--		return err;
--
- 	/* +16 degrees offset for temp2 for the LM99 */
--	if (data->kind == lm99 && attr->index == 3)
-+	if (data->kind == lm99 && index == 3)
- 		val -= 16000;
- 
- 	mutex_lock(&data->update_lock);
- 	if (data->kind == adt7461 || data->kind == tmp451)
--		data->temp8[nr] = temp_to_u8_adt7461(data, val);
-+		data->temp8[index] = temp_to_u8_adt7461(data, val);
- 	else if (data->kind == max6646)
--		data->temp8[nr] = temp_to_u8(val);
-+		data->temp8[index] = temp_to_u8(val);
- 	else
--		data->temp8[nr] = temp_to_s8(val);
--
--	lm90_select_remote_channel(client, data, nr >= 6);
--	i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]);
--	lm90_select_remote_channel(client, data, 0);
-+		data->temp8[index] = temp_to_s8(val);
- 
-+	if ((err = lm90_select_remote_channel(client, data, index >= 6)) ||
-+	    (err = i2c_smbus_write_byte_data(client, reg[index],
-+					     data->temp8[index])) ||
-+	    (err = lm90_select_remote_channel(client, data, 0)))
-+		dev_err(dev, "write_temp8 failed, err %d\n", err);
- 	mutex_unlock(&data->update_lock);
-+
-+	return err;
-+}
-+
-+static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
-+			 const char *buf, size_t count)
-+{
-+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-+	int index = attr->index;
-+	long val;
-+	int err;
-+
-+	err = kstrtol(buf, 10, &val);
-+	if (err < 0)
-+		return err;
-+
-+	err = write_temp8(dev, index, val);
-+	if (err < 0)
-+		return err;
-+
- 	return count;
- }
- 
--static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
--			   char *buf)
-+static int read_temp11(struct device *dev, int index)
- {
--	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
- 	struct lm90_data *data = lm90_update_device(dev);
- 	int temp;
- 
- 	if (data->kind == adt7461 || data->kind == tmp451)
--		temp = temp_from_u16_adt7461(data, data->temp11[attr->index]);
-+		temp = temp_from_u16_adt7461(data, data->temp11[index]);
- 	else if (data->kind == max6646)
--		temp = temp_from_u16(data->temp11[attr->index]);
-+		temp = temp_from_u16(data->temp11[index]);
- 	else
--		temp = temp_from_s16(data->temp11[attr->index]);
-+		temp = temp_from_s16(data->temp11[index]);
- 
- 	/* +16 degrees offset for temp2 for the LM99 */
--	if (data->kind == lm99 &&  attr->index <= 2)
-+	if (data->kind == lm99 && index <= 2)
- 		temp += 16000;
- 
--	return sprintf(buf, "%d\n", temp);
-+	return temp;
- }
- 
--static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
--			  const char *buf, size_t count)
-+static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
-+			   char *buf)
-+{
-+	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
-+
-+	return sprintf(buf, "%d\n", read_temp11(dev, attr->index));
-+}
-+
-+static int write_temp11(struct device *dev, int nr, int index, long val)
- {
- 	struct {
- 		u8 high;
-@@ -861,18 +894,10 @@ static ssize_t set_temp11(struct device
- 		{ LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 1 }
- 	};
- 
--	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
- 	struct lm90_data *data = dev_get_drvdata(dev);
- 	struct i2c_client *client = data->client;
--	int nr = attr->nr;
--	int index = attr->index;
--	long val;
- 	int err;
- 
--	err = kstrtol(buf, 10, &val);
--	if (err < 0)
--		return err;
--
- 	/* +16 degrees offset for temp2 for the LM99 */
- 	if (data->kind == lm99 && index <= 2)
- 		val -= 16000;
-@@ -887,15 +912,50 @@ static ssize_t set_temp11(struct device
- 	else
- 		data->temp11[index] = temp_to_s8(val) << 8;
- 
--	lm90_select_remote_channel(client, data, reg[nr].channel);
--	i2c_smbus_write_byte_data(client, reg[nr].high,
--				  data->temp11[index] >> 8);
--	if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
--		i2c_smbus_write_byte_data(client, reg[nr].low,
--					  data->temp11[index] & 0xff);
--	lm90_select_remote_channel(client, data, 0);
-+	err = lm90_select_remote_channel(client, data, reg[nr].channel);
-+	if (err)
-+		goto error;
-+
-+	err = i2c_smbus_write_byte_data(client, reg[nr].high,
-+					data->temp11[index] >> 8);
-+	if (err)
-+		goto error;
-+
-+	if (data->flags & LM90_HAVE_REM_LIMIT_EXT) {
-+		err = i2c_smbus_write_byte_data(client, reg[nr].low,
-+						data->temp11[index] & 0xff);
-+		if (err)
-+			goto error;
-+	}
-+
-+	err = lm90_select_remote_channel(client, data, 0);
-+
-+error:
-+	if (err)
-+		dev_err(dev, "write_temp11 failed, err %d\n", err);
- 
- 	mutex_unlock(&data->update_lock);
-+
-+	return err;
-+}
-+
-+static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
-+			  const char *buf, size_t count)
-+{
-+	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
-+	int nr = attr->nr;
-+	int index = attr->index;
-+	long val;
-+	int err;
-+
-+	err = kstrtol(buf, 10, &val);
-+	if (err < 0)
-+		return err;
-+
-+	err = write_temp11(dev, nr, index, val);
-+	if (err < 0)
-+		return err;
-+
- 	return count;
- }
- 
diff --git a/target/linux/apm821xx/patches-4.4/912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch b/target/linux/apm821xx/patches-4.4/912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch
deleted file mode 100644
index 9eb9ceeaac..0000000000
--- a/target/linux/apm821xx/patches-4.4/912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Wei Ni <wni@nvidia.com>
-Subject: hwmon: lm90: expose to thermal fw via DT nodes
-
-This patch adds to lm90 temperature sensor the possibility
-to expose itself as thermal zone device, registered on the
-thermal framework.
-
-The thermal zone is built only if a device tree node
-describing a thermal zone for this sensor is present
-inside the lm90 DT node. Otherwise, the driver behavior
-will be the same.
-
-Discussed in:
-http://www.gossamer-threads.com/lists/linux/kernel/1992853
-
-BUG=chrome-os-partner:30834
-TEST=Verified. Build and boot up system.
-
-Signed-off-by: Wei Ni <wni@nvidia.com>
-Reviewed-on: https://chromium-review.googlesource.com/181447
-Reviewed-by: Dylan Reid <dgreid@chromium.org>
-Tested-by: Dylan Reid <dgreid@chromium.org>
-Commit-Queue: Dylan Reid <dgreid@chromium.org>
-Change-Id: Id356b94d7e8f4b49ec15e46b17a1fa2ff0cbf8cf
-Reviewed-on: https://chromium-review.googlesource.com/212414
-Tested-by: Wei Ni <wni.nvidia@gmail.com>
-Reviewed-by: Olof Johansson <olofj@chromium.org>
-Commit-Queue: Olof Johansson <olofj@chromium.org>
----
---- a/drivers/hwmon/lm90.c
-+++ b/drivers/hwmon/lm90.c
-@@ -96,6 +96,8 @@
- #include <linux/sysfs.h>
- #include <linux/interrupt.h>
- #include <linux/regulator/consumer.h>
-+#include <linux/of.h>
-+#include <linux/thermal.h>
- 
- /*
-  * Addresses to scan
-@@ -119,6 +121,13 @@ static const unsigned short normal_i2c[]
- enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
- 	max6646, w83l771, max6696, sa56004, g781, tmp451 };
- 
-+enum sensor_id {
-+	LOCAL = 0,
-+	REMOTE,
-+	REMOTE2,
-+	SENSOR_ID_END,
-+};
-+
- /*
-  * The LM90 registers
-  */
-@@ -368,6 +377,7 @@ struct lm90_data {
- 	struct i2c_client *client;
- 	struct device *hwmon_dev;
- 	const struct attribute_group *groups[6];
-+	struct thermal_zone_device *tz[SENSOR_ID_END];
- 	struct mutex update_lock;
- 	struct regulator *regulator;
- 	char valid; /* zero until following fields are valid */
-@@ -880,6 +890,24 @@ static ssize_t show_temp11(struct device
- 	return sprintf(buf, "%d\n", read_temp11(dev, attr->index));
- }
- 
-+static int lm90_read_local_temp(void *dev, int *temp)
-+{
-+	*temp = read_temp11(dev, 4);
-+	return 0;
-+}
-+
-+static int lm90_read_remote_temp(void *dev, int *temp)
-+{
-+	*temp = read_temp11(dev, 0);
-+	return 0;
-+}
-+
-+static int lm90_read_remote2_temp(void *dev, int *temp)
-+{
-+	*temp = read_temp11(dev, 5);
-+	return 0;
-+}
-+
- static int write_temp11(struct device *dev, int nr, int index, long val)
- {
- 	struct {
-@@ -1210,6 +1238,18 @@ static const struct attribute_group lm90
- 	.attrs = lm90_temp3_attributes,
- };
- 
-+static const struct thermal_zone_of_device_ops local_temp_sensor = {
-+	.get_temp = lm90_read_local_temp,
-+};
-+
-+static const struct thermal_zone_of_device_ops remote_temp_sensor = {
-+	.get_temp = lm90_read_remote_temp,
-+};
-+
-+static const struct thermal_zone_of_device_ops remote2_temp_sensor = {
-+	.get_temp = lm90_read_remote2_temp,
-+};
-+
- /* pec used for ADM1032 only */
- static ssize_t show_pec(struct device *dev, struct device_attribute *dummy,
- 			char *buf)
-@@ -1659,6 +1699,30 @@ static int lm90_probe(struct i2c_client
- 		}
- 	}
- 
-+	data->tz[LOCAL] = thermal_zone_of_sensor_register(&client->dev,
-+							LOCAL,
-+							&client->dev,
-+							&local_temp_sensor);
-+	if (IS_ERR(data->tz[LOCAL]))
-+		data->tz[LOCAL] = NULL;
-+
-+	data->tz[REMOTE] = thermal_zone_of_sensor_register(&client->dev,
-+							REMOTE,
-+							&client->dev,
-+							&remote_temp_sensor);
-+	if (IS_ERR(data->tz[REMOTE]))
-+		data->tz[REMOTE] = NULL;
-+
-+	if (data->flags & LM90_HAVE_TEMP3) {
-+		data->tz[REMOTE2] = thermal_zone_of_sensor_register(
-+							&client->dev,
-+							REMOTE2,
-+							&client->dev,
-+							&remote2_temp_sensor);
-+		if (IS_ERR(data->tz[REMOTE2]))
-+			data->tz[REMOTE2] = NULL;
-+	}
-+
- 	return 0;
- 
- exit_unregister:
-@@ -1674,8 +1738,11 @@ exit_restore:
- 
- static int lm90_remove(struct i2c_client *client)
- {
-+	int i;
- 	struct lm90_data *data = i2c_get_clientdata(client);
- 
-+	for (i = 0; i < SENSOR_ID_END; i++)
-+		thermal_zone_of_sensor_unregister(&client->dev, data->tz[i]);
- 	hwmon_device_unregister(data->hwmon_dev);
- 	device_remove_file(&client->dev, &dev_attr_pec);
- 	lm90_restore_conf(client, data);