trunk-47381HEADmaster

3 files changed, 120 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network
new file mode 100755
index 0000000..a164251
--- /dev/null
+++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network
@@ -0,0 +1,70 @@
+#!/bin/sh
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults-new.sh
+
+board_config_update
+
+board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
+case "$board" in
+asus,rt-ac87u)
+	ifname=eth1
+	;;
+netgear,r8000)
+	ifname=eth2
+	;;
+*)
+	ifname=eth0
+	;;
+esac
+
+# Workaround for devices using eth2
+case "$board" in
+netgear,r8000)
+	ifname=eth0
+	;;
+esac
+
+ucidef_set_interface_loopback
+ucidef_set_interfaces_lan_wan "$ifname.1" "$ifname.2"
+ucidef_add_switch "switch0" "1" "1"
+
+# Workaround for devices using CPU port 8 (connected to eth2)
+case "$board" in
+netgear,r8000)
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+	ucidef_add_switch_vlan "switch0" "2" "4 5t"
+	board_config_flush
+	exit 0
+	;;
+esac
+
+# NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses
+# vlan1ports=3 2 1 0 5*
+# vlan2ports=4 5u
+# and early Netgear R8000 was using
+# vlan1ports=3 2 1 0 5 7 8*
+vlan1ports="$(echo $(nvram get vlan1ports | tr " " "\n" | sort))"
+vlan2ports="$(echo $(nvram get vlan2ports | tr " " "\n" | sort))"
+if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
+   echo "$vlan2ports" | egrep -q "^0 5"; then
+	ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+	ucidef_add_switch_vlan "switch0" "2" "0 5t"
+elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \
+     echo "$vlan2ports" | egrep -q "^0 7"; then
+	ucidef_add_switch_vlan "switch0" "1" "1 2 3 5 7t"
+	ucidef_add_switch_vlan "switch0" "2" "0 7t"
+elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
+     echo "$vlan2ports" | egrep -q "^4 8"; then
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5 7 8t"
+	ucidef_add_switch_vlan "switch0" "2" "4 8t"
+else
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+	ucidef_add_switch_vlan "switch0" "2" "4 5t"
+fi
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/bcm53xx/base-files/etc/diag.sh b/target/linux/bcm53xx/base-files/etc/diag.sh
new file mode 100644
index 0000000..0a8c5fb
--- /dev/null
+++ b/target/linux/bcm53xx/base-files/etc/diag.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+# Copyright (C) 2014 OpenWrt.org
+
+. /lib/functions/leds.sh
+
+get_status_led() {
+	local status_led_file
+
+	# There may be more than one color of power LED, try to avoid amber/red
+	status_led_file=$(find /sys/class/leds/ -name "*:power" -a ! -name "*:amber:*" -a ! -name "*:red:*" | head -n1)
+	if [ -d "$status_led_file" ]; then
+		status_led=$(basename $status_led_file)
+		return
+	fi;
+
+	# Now just pick any power LED
+	status_led_file=$(find /sys/class/leds/ -name "*:power:*" | head -n1)
+	if [ -d "$status_led_file" ]; then
+		status_led=$(basename $status_led_file)
+		return
+	fi;
+}
+
+set_state() {
+	get_status_led
+
+	[ -z "$status_led" ] && return
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}
diff --git a/target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc
new file mode 100644
index 0000000..346a532
--- /dev/null
+++ b/target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc
@@ -0,0 +1,7 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+mtd fixtrx firmware