diff options
Diffstat (limited to 'target/linux/generic/files/include')
43 files changed, 2846 insertions, 0 deletions
diff --git a/target/linux/generic/files/include/.svn/entries b/target/linux/generic/files/include/.svn/entries new file mode 100644 index 0000000..43e0e70 --- /dev/null +++ b/target/linux/generic/files/include/.svn/entries @@ -0,0 +1,34 @@ +10 + +dir +36060 +svn://svn.openwrt.org/openwrt/trunk/target/linux/generic/files/include +svn://svn.openwrt.org/openwrt + + + +2013-01-23T10:12:33.903618Z +35305 +jogo + + + + + + + + + + + + + + +3c298f89-4303-0410-b956-a3cf2f4a3e73 + +linux +dir + +uapi +dir + diff --git a/target/linux/generic/files/include/linux/.svn/entries b/target/linux/generic/files/include/linux/.svn/entries new file mode 100644 index 0000000..24c7898 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/entries @@ -0,0 +1,442 @@ +10 + +dir +36060 +svn://svn.openwrt.org/openwrt/trunk/target/linux/generic/files/include/linux +svn://svn.openwrt.org/openwrt + + + +2013-01-23T10:12:33.903618Z +35305 +jogo + + + + + + + + + + + + + + +3c298f89-4303-0410-b956-a3cf2f4a3e73 + +rtl8367.h +file + + + + +2013-03-17T12:13:03.000000Z +f0f367c504d8b81c3abdbbc6de2d351a +2012-10-18T07:22:56.249621Z +33839 +juhosg +has-props + + + + + + + + + + + + + + + + + + + + +1336 + +gpio_buttons.h +file + + + + +2013-03-17T12:13:03.000000Z +a2bc6cb7cbd37748d62f8e81d27cc615 +2010-06-26T20:42:58.993070Z +21952 +nbd + + + + + + + + + + + + + + + + + + + + + +926 + +myloader.h +file + + + + +2013-03-17T12:13:03.000000Z +e67e4e4e39504b4aabf873086013188e +2012-01-26T17:01:38.880584Z +29911 +juhosg +has-props + + + + + + + + + + + + + + + + + + + + +3659 + +pwm +dir + +ath5k_platform.h +file + + + + +2013-03-17T12:13:03.000000Z +370f9995972bb6673bc56da78f630abf +2010-07-15T07:36:58.092984Z +22189 +juhosg + + + + + + + + + + + + + + + + + + + + + +1165 + +switch.h +file + + + + +2013-03-17T12:13:03.000000Z +f2145b9e8fc22e83ec89be998265d991 +2012-12-14T12:11:41.962184Z +34677 +juhosg + + + + + + + + + + + + + + + + + + + + + +3828 + +glamo-engine.h +file + + + + +2013-03-17T12:13:03.000000Z +b8ca853c46b262f43e96328c2871d476 +2010-06-26T20:42:58.993070Z +21952 +nbd + + + + + + + + + + + + + + + + + + + + + +566 + +rt2x00_platform.h +file + + + + +2013-03-17T12:13:03.000000Z +d227ad05963460fb06401629655f8f31 +2012-11-20T07:19:09.236868Z +34269 +juhosg +has-props + + + + + + + + + + + + + + + + + + + + +537 + +ath9k_platform.h +file + + + + +2013-03-17T12:13:03.000000Z +a2e179f4c7e563ce4fba1307b96ad25d +2012-12-10T15:46:15.202656Z +34606 +juhosg +has-props + + + + + + + + + + + + + + + + + + + + +1393 + +routerboot.h +file + + + + +2013-03-17T12:13:03.000000Z +2b6c20cfc65119ec1ee26bb9a98fc3fc +2012-09-09T14:05:26.411489Z +33346 +juhosg +has-props + + + + + + + + + + + + + + + + + + + + +2212 + +platform_data +dir + +ar8216_platform.h +file + + + + +2013-03-17T12:13:03.000000Z +aae7545332d315cbae3289f149637053 +2012-12-25T18:45:31.736200Z +34881 +juhosg +has-props + + + + + + + + + + + + + + + + + + + + +1930 + +glamofb.h +file + + + + +2013-03-17T12:13:03.000000Z +047ca810bce2c32ddf23dd2d3229b9d4 +2010-06-26T20:42:58.993070Z +21952 +nbd + + + + + + + + + + + + + + + + + + + + + +720 + +rtl8366.h +file + + + + +2013-03-17T12:13:03.000000Z +fb66ad21d8d7cfb52cd12ce1685e4b63 +2012-08-02T09:54:21.519628Z +32943 +juhosg + + + + + + + + + + + + + + + + + + + + + +906 + diff --git a/target/linux/generic/files/include/linux/.svn/prop-base/ar8216_platform.h.svn-base b/target/linux/generic/files/include/linux/.svn/prop-base/ar8216_platform.h.svn-base new file mode 100644 index 0000000..bdbd305 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/prop-base/ar8216_platform.h.svn-base @@ -0,0 +1,5 @@ +K 13 +svn:eol-style +V 6 +native +END diff --git a/target/linux/generic/files/include/linux/.svn/prop-base/ath9k_platform.h.svn-base b/target/linux/generic/files/include/linux/.svn/prop-base/ath9k_platform.h.svn-base new file mode 100644 index 0000000..bdbd305 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/prop-base/ath9k_platform.h.svn-base @@ -0,0 +1,5 @@ +K 13 +svn:eol-style +V 6 +native +END diff --git a/target/linux/generic/files/include/linux/.svn/prop-base/myloader.h.svn-base b/target/linux/generic/files/include/linux/.svn/prop-base/myloader.h.svn-base new file mode 100644 index 0000000..bdbd305 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/prop-base/myloader.h.svn-base @@ -0,0 +1,5 @@ +K 13 +svn:eol-style +V 6 +native +END diff --git a/target/linux/generic/files/include/linux/.svn/prop-base/routerboot.h.svn-base b/target/linux/generic/files/include/linux/.svn/prop-base/routerboot.h.svn-base new file mode 100644 index 0000000..bdbd305 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/prop-base/routerboot.h.svn-base @@ -0,0 +1,5 @@ +K 13 +svn:eol-style +V 6 +native +END diff --git a/target/linux/generic/files/include/linux/.svn/prop-base/rt2x00_platform.h.svn-base b/target/linux/generic/files/include/linux/.svn/prop-base/rt2x00_platform.h.svn-base new file mode 100644 index 0000000..bdbd305 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/prop-base/rt2x00_platform.h.svn-base @@ -0,0 +1,5 @@ +K 13 +svn:eol-style +V 6 +native +END diff --git a/target/linux/generic/files/include/linux/.svn/prop-base/rtl8367.h.svn-base b/target/linux/generic/files/include/linux/.svn/prop-base/rtl8367.h.svn-base new file mode 100644 index 0000000..bdbd305 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/prop-base/rtl8367.h.svn-base @@ -0,0 +1,5 @@ +K 13 +svn:eol-style +V 6 +native +END diff --git a/target/linux/generic/files/include/linux/.svn/text-base/ar8216_platform.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/ar8216_platform.h.svn-base new file mode 100644 index 0000000..c6c6144 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/ar8216_platform.h.svn-base @@ -0,0 +1,83 @@ +/* + * AR8216 switch driver platform data + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef AR8216_PLATFORM_H +#define AR8216_PLATFORM_H + +enum ar8327_pad_mode { + AR8327_PAD_NC = 0, + AR8327_PAD_MAC2MAC_MII, + AR8327_PAD_MAC2MAC_GMII, + AR8327_PAD_MAC_SGMII, + AR8327_PAD_MAC2PHY_MII, + AR8327_PAD_MAC2PHY_GMII, + AR8327_PAD_MAC_RGMII, + AR8327_PAD_PHY_GMII, + AR8327_PAD_PHY_RGMII, + AR8327_PAD_PHY_MII, +}; + +enum ar8327_clk_delay_sel { + AR8327_CLK_DELAY_SEL0 = 0, + AR8327_CLK_DELAY_SEL1, + AR8327_CLK_DELAY_SEL2, + AR8327_CLK_DELAY_SEL3, +}; + +struct ar8327_pad_cfg { + enum ar8327_pad_mode mode; + bool rxclk_sel; + bool txclk_sel; + bool pipe_rxclk_sel; + bool txclk_delay_en; + bool rxclk_delay_en; + bool sgmii_delay_en; + enum ar8327_clk_delay_sel txclk_delay_sel; + enum ar8327_clk_delay_sel rxclk_delay_sel; +}; + +enum ar8327_port_speed { + AR8327_PORT_SPEED_10 = 0, + AR8327_PORT_SPEED_100, + AR8327_PORT_SPEED_1000, +}; + +struct ar8327_port_cfg { + int force_link:1; + enum ar8327_port_speed speed; + int txpause:1; + int rxpause:1; + int duplex:1; +}; + +struct ar8327_led_cfg { + u32 led_ctrl0; + u32 led_ctrl1; + u32 led_ctrl2; + u32 led_ctrl3; + bool open_drain; +}; + +struct ar8327_platform_data { + struct ar8327_pad_cfg *pad0_cfg; + struct ar8327_pad_cfg *pad5_cfg; + struct ar8327_pad_cfg *pad6_cfg; + struct ar8327_port_cfg port0_cfg; + struct ar8327_port_cfg port6_cfg; + struct ar8327_led_cfg *led_cfg; +}; + +#endif /* AR8216_PLATFORM_H */
\ No newline at end of file diff --git a/target/linux/generic/files/include/linux/.svn/text-base/ath5k_platform.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/ath5k_platform.h.svn-base new file mode 100644 index 0000000..ec85224 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/ath5k_platform.h.svn-base @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> + * Copyright (c) 2010 Daniel Golle <daniel.golle@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH5K_PLATFORM_H +#define _LINUX_ATH5K_PLATFORM_H + +#define ATH5K_PLAT_EEP_MAX_WORDS 2048 + +struct ath5k_platform_data { + u16 *eeprom_data; + u8 *macaddr; +}; + +#endif /* _LINUX_ATH5K_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/.svn/text-base/ath9k_platform.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/ath9k_platform.h.svn-base new file mode 100644 index 0000000..a0b7531 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/ath9k_platform.h.svn-base @@ -0,0 +1,46 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH9K_PLATFORM_H +#define _LINUX_ATH9K_PLATFORM_H + +#define ATH9K_PLAT_EEP_MAX_WORDS 2048 + +struct ath9k_platform_data { + const char *eeprom_name; + + u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; + u8 *macaddr; + + int led_pin; + u32 gpio_mask; + u32 gpio_val; + + bool endian_check; + bool is_clk_25mhz; + bool disable_2ghz; + bool disable_5ghz; + + int (*get_mac_revision)(void); + int (*external_reset)(void); + + int num_leds; + const struct gpio_led *leds; +}; + +#endif /* _LINUX_ATH9K_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/.svn/text-base/glamo-engine.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/glamo-engine.h.svn-base new file mode 100644 index 0000000..516d45f --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/glamo-engine.h.svn-base @@ -0,0 +1,27 @@ +#ifndef __GLAMO_ENGINE_H +#define __GLAMO_ENGINE_H + +enum glamo_engine { + GLAMO_ENGINE_CAPTURE = 0, + GLAMO_ENGINE_ISP = 1, + GLAMO_ENGINE_JPEG = 2, + GLAMO_ENGINE_MPEG_ENC = 3, + GLAMO_ENGINE_MPEG_DEC = 4, + GLAMO_ENGINE_LCD = 5, + GLAMO_ENGINE_CMDQ = 6, + GLAMO_ENGINE_2D = 7, + GLAMO_ENGINE_3D = 8, + GLAMO_ENGINE_MMC = 9, + GLAMO_ENGINE_MICROP0 = 10, + GLAMO_ENGINE_RISC = 11, + GLAMO_ENGINE_MICROP1_MPEG_ENC = 12, + GLAMO_ENGINE_MICROP1_MPEG_DEC = 13, +#if 0 + GLAMO_ENGINE_H264_DEC = 14, + GLAMO_ENGINE_RISC1 = 15, + GLAMO_ENGINE_SPI = 16, +#endif + __NUM_GLAMO_ENGINES +}; + +#endif diff --git a/target/linux/generic/files/include/linux/.svn/text-base/glamofb.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/glamofb.h.svn-base new file mode 100644 index 0000000..5f9fab5 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/glamofb.h.svn-base @@ -0,0 +1,35 @@ +#ifndef _LINUX_GLAMOFB_H +#define _LINUX_GLAMOFB_H + +#include <linux/fb.h> + +#ifdef __KERNEL__ + +struct glamo_core; +struct glamofb_handle; + +struct glamo_fb_platform_data { + int width, height; + + int num_modes; + struct fb_videomode *modes; + + struct glamo_core *core; +}; + +int glamofb_cmd_mode(struct glamofb_handle *gfb, int on); +int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val); + +#ifdef CONFIG_MFD_GLAMO +void glamo_lcm_reset(struct platform_device *pdev, int level); +#else +#define glamo_lcm_reset(...) do {} while (0) +#endif + +#endif + +#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32) +#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32) +#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32) + +#endif diff --git a/target/linux/generic/files/include/linux/.svn/text-base/gpio_buttons.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/gpio_buttons.h.svn-base new file mode 100644 index 0000000..f85b993 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/gpio_buttons.h.svn-base @@ -0,0 +1,33 @@ +/* + * Definitions for the GPIO buttons interface driver + * + * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This file was based on: /include/linux/gpio_keys.h + * The original gpio_keys.h seems not to have a license. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _GPIO_BUTTONS_H_ +#define _GPIO_BUTTONS_H_ + +struct gpio_button { + int gpio; /* GPIO line number */ + int active_low; + char *desc; /* button description */ + int type; /* input event type (EV_KEY, EV_SW) */ + int code; /* input event code (KEY_*, SW_*) */ + int threshold; /* count threshold */ +}; + +struct gpio_buttons_platform_data { + struct gpio_button *buttons; + int nbuttons; /* number of buttons */ + int poll_interval; /* polling interval */ +}; + +#endif /* _GPIO_BUTTONS_H_ */ diff --git a/target/linux/generic/files/include/linux/.svn/text-base/myloader.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/myloader.h.svn-base new file mode 100644 index 0000000..d89e415 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/myloader.h.svn-base @@ -0,0 +1,121 @@ +/* + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_SYS_PARAMS 0x20021107 +#define MYLO_MAGIC_PARTITIONS 0x20021103 +#define MYLO_MAGIC_BOARD_PARAMS 0x20021103 + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the Atheros AR2317 */ +#define DEVID_COMPEX_NP25G 0x05E6 +#define DEVID_COMPEX_WPE53G 0x05DC + +/* Devices based on the Atheros AR71xx */ +#define DEVID_COMPEX_WP543 0x0640 +#define DEVID_COMPEX_WPE72 0x0672 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_LZMA 0x0100 /* partition data compressed by LZMA */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* size of boot FLASH in bytes */ + uint32_t dram_size; /* size of onboard RAM in bytes */ +}; + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/generic/files/include/linux/.svn/text-base/routerboot.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/routerboot.h.svn-base new file mode 100644 index 0000000..0244843 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/routerboot.h.svn-base @@ -0,0 +1,105 @@ +/* + * Mikrotik's RouterBOOT definitions + * + * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ROUTERBOOT_H +#define _ROUTERBOOT_H + +#define RB_MAC_SIZE 6 + +/* + * Magic numbers + */ +#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ +#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ +#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ + +#define RB_ID_TERMINATOR 0 + +/* + * ID values for Hardware settings + */ +#define RB_ID_HARD_01 1 +#define RB_ID_HARD_02 2 +#define RB_ID_FLASH_INFO 3 +#define RB_ID_MAC_ADDRESS_PACK 4 +#define RB_ID_BOARD_NAME 5 +#define RB_ID_BIOS_VERSION 6 +#define RB_ID_HARD_07 7 +#define RB_ID_SDRAM_TIMINGS 8 +#define RB_ID_DEVICE_TIMINGS 9 +#define RB_ID_SOFTWARE_ID 10 +#define RB_ID_SERIAL_NUMBER 11 +#define RB_ID_HARD_12 12 +#define RB_ID_MEMORY_SIZE 13 +#define RB_ID_MAC_ADDRESS_COUNT 14 +#define RB_ID_WLAN_DATA 22 + +/* + * ID values for Software settings + */ +#define RB_ID_UART_SPEED 1 +#define RB_ID_BOOT_DELAY 2 +#define RB_ID_BOOT_DEVICE 3 +#define RB_ID_BOOT_KEY 4 +#define RB_ID_CPU_MODE 5 +#define RB_ID_FW_VERSION 6 +#define RB_ID_SOFT_07 7 +#define RB_ID_SOFT_08 8 +#define RB_ID_BOOT_PROTOCOL 9 +#define RB_ID_SOFT_10 10 +#define RB_ID_SOFT_11 11 + +/* + * UART_SPEED values + */ +#define RB_UART_SPEED_115200 0 +#define RB_UART_SPEED_57600 1 +#define RB_UART_SPEED_38400 2 +#define RB_UART_SPEED_19200 3 +#define RB_UART_SPEED_9600 4 +#define RB_UART_SPEED_4800 5 +#define RB_UART_SPEED_2400 6 +#define RB_UART_SPEED_1200 7 + +/* + * BOOT_DELAY values + */ +#define RB_BOOT_DELAY_0SEC 0 +#define RB_BOOT_DELAY_1SEC 1 +#define RB_BOOT_DELAY_2SEC 2 + +/* + * BOOT_DEVICE values + */ +#define RB_BOOT_DEVICE_ETHER 0 +#define RB_BOOT_DEVICE_NANDETH 1 +#define RB_BOOT_DEVICE_ETHONCE 2 +#define RB_BOOT_DEVICE_NANDONLY 3 + +/* + * BOOT_KEY values + */ +#define RB_BOOT_KEY_ANY 0 +#define RB_BOOT_KEY_DEL 1 + +/* + * CPU_MODE values + */ +#define RB_CPU_MODE_POWERSAVE 0 +#define RB_CPU_MODE_REGULAR 1 + +/* + * BOOT_PROTOCOL values + */ +#define RB_BOOT_PROTOCOL_BOOTP 0 +#define RB_BOOT_PROTOCOL_DHCP 1 + +#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/generic/files/include/linux/.svn/text-base/rt2x00_platform.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/rt2x00_platform.h.svn-base new file mode 100644 index 0000000..80483ef --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/rt2x00_platform.h.svn-base @@ -0,0 +1,24 @@ +/* + * Platform data definition for the rt2x00 driver + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _RT2X00_PLATFORM_H +#define _RT2X00_PLATFORM_H + +struct rt2x00_platform_data { + char *eeprom_file_name; + const u8 *mac_address; + + int disable_2ghz; + int disable_5ghz; + int clk_is_20mhz; +}; + +#endif /* _RT2X00_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/.svn/text-base/rtl8366.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/rtl8366.h.svn-base new file mode 100644 index 0000000..78daed2 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/rtl8366.h.svn-base @@ -0,0 +1,40 @@ +/* + * Platform data definition for the Realtek RTL8366RB/S ethernet switch driver + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RTL8366_H +#define _RTL8366_H + +#define RTL8366_DRIVER_NAME "rtl8366" +#define RTL8366S_DRIVER_NAME "rtl8366s" +#define RTL8366RB_DRIVER_NAME "rtl8366rb" + +enum rtl8366_type { + RTL8366_TYPE_UNKNOWN, + RTL8366_TYPE_S, + RTL8366_TYPE_RB, +}; + +struct rtl8366_initval { + unsigned reg; + u16 val; +}; + +struct rtl8366_platform_data { + unsigned gpio_sda; + unsigned gpio_sck; + void (*hw_reset)(bool active); + + unsigned num_initvals; + struct rtl8366_initval *initvals; +}; + +enum rtl8366_type rtl8366_smi_detect(struct rtl8366_platform_data *pdata); + +#endif /* _RTL8366_H */ diff --git a/target/linux/generic/files/include/linux/.svn/text-base/rtl8367.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/rtl8367.h.svn-base new file mode 100644 index 0000000..855de6a --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/rtl8367.h.svn-base @@ -0,0 +1,60 @@ +/* + * Platform data definition for the Realtek RTL8367 ethernet switch driver + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RTL8367_H +#define _RTL8367_H + +#define RTL8367_DRIVER_NAME "rtl8367" +#define RTL8367B_DRIVER_NAME "rtl8367b" + +enum rtl8367_port_speed { + RTL8367_PORT_SPEED_10 = 0, + RTL8367_PORT_SPEED_100, + RTL8367_PORT_SPEED_1000, +}; + +struct rtl8367_port_ability { + int force_mode; + int nway; + int txpause; + int rxpause; + int link; + int duplex; + enum rtl8367_port_speed speed; +}; + +enum rtl8367_extif_mode { + RTL8367_EXTIF_MODE_DISABLED = 0, + RTL8367_EXTIF_MODE_RGMII, + RTL8367_EXTIF_MODE_MII_MAC, + RTL8367_EXTIF_MODE_MII_PHY, + RTL8367_EXTIF_MODE_TMII_MAC, + RTL8367_EXTIF_MODE_TMII_PHY, + RTL8367_EXTIF_MODE_GMII, + RTL8367_EXTIF_MODE_RGMII_33V, +}; + +struct rtl8367_extif_config { + unsigned int txdelay; + unsigned int rxdelay; + enum rtl8367_extif_mode mode; + struct rtl8367_port_ability ability; +}; + +struct rtl8367_platform_data { + unsigned gpio_sda; + unsigned gpio_sck; + void (*hw_reset)(bool active); + + struct rtl8367_extif_config *extif0_cfg; + struct rtl8367_extif_config *extif1_cfg; +}; + +#endif /* _RTL8367_H */ diff --git a/target/linux/generic/files/include/linux/.svn/text-base/switch.h.svn-base b/target/linux/generic/files/include/linux/.svn/text-base/switch.h.svn-base new file mode 100644 index 0000000..bd4fae4 --- /dev/null +++ b/target/linux/generic/files/include/linux/.svn/text-base/switch.h.svn-base @@ -0,0 +1,160 @@ +/* + * switch.h: Switch configuration API + * + * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef _LINUX_SWITCH_H +#define _LINUX_SWITCH_H + +#include <net/genetlink.h> +#include <uapi/linux/switch.h> + +struct switch_dev; +struct switch_op; +struct switch_val; +struct switch_attr; +struct switch_attrlist; +struct switch_led_trigger; + +int register_switch(struct switch_dev *dev, struct net_device *netdev); +void unregister_switch(struct switch_dev *dev); + +/** + * struct switch_attrlist - attribute list + * + * @n_attr: number of attributes + * @attr: pointer to the attributes array + */ +struct switch_attrlist { + int n_attr; + const struct switch_attr *attr; +}; + +enum switch_port_speed { + SWITCH_PORT_SPEED_UNKNOWN = 0, + SWITCH_PORT_SPEED_10 = 10, + SWITCH_PORT_SPEED_100 = 100, + SWITCH_PORT_SPEED_1000 = 1000, +}; + +struct switch_port_link { + bool link; + bool duplex; + bool aneg; + bool tx_flow; + bool rx_flow; + enum switch_port_speed speed; +}; + +struct switch_port_stats { + unsigned long tx_bytes; + unsigned long rx_bytes; +}; + +/** + * struct switch_dev_ops - switch driver operations + * + * @attr_global: global switch attribute list + * @attr_port: port attribute list + * @attr_vlan: vlan attribute list + * + * Callbacks: + * + * @get_vlan_ports: read the port list of a VLAN + * @set_vlan_ports: set the port list of a VLAN + * + * @get_port_pvid: get the primary VLAN ID of a port + * @set_port_pvid: set the primary VLAN ID of a port + * + * @apply_config: apply all changed settings to the switch + * @reset_switch: resetting the switch + */ +struct switch_dev_ops { + struct switch_attrlist attr_global, attr_port, attr_vlan; + + int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + + int (*get_port_pvid)(struct switch_dev *dev, int port, int *val); + int (*set_port_pvid)(struct switch_dev *dev, int port, int val); + + int (*apply_config)(struct switch_dev *dev); + int (*reset_switch)(struct switch_dev *dev); + + int (*get_port_link)(struct switch_dev *dev, int port, + struct switch_port_link *link); + int (*get_port_stats)(struct switch_dev *dev, int port, + struct switch_port_stats *stats); +}; + +struct switch_dev { + const struct switch_dev_ops *ops; + /* will be automatically filled */ + char devname[IFNAMSIZ]; + + const char *name; + /* NB: either alias or netdev must be set */ + const char *alias; + struct net_device *netdev; + + int ports; + int vlans; + int cpu_port; + + /* the following fields are internal for swconfig */ + int id; + struct list_head dev_list; + unsigned long def_global, def_port, def_vlan; + + struct mutex sw_mutex; + struct switch_port *portbuf; + + char buf[128]; + +#ifdef CONFIG_SWCONFIG_LEDS + struct switch_led_trigger *led_trigger; +#endif +}; + +struct switch_port { + u32 id; + u32 flags; +}; + +struct switch_val { + const struct switch_attr *attr; + int port_vlan; + int len; + union { + const char *s; + u32 i; + struct switch_port *ports; + } value; +}; + +struct switch_attr { + int disabled; + int type; + const char *name; + const char *description; + + int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + + /* for driver internal use */ + int id; + int ofs; + int max; +}; + +#endif /* _LINUX_SWITCH_H */ diff --git a/target/linux/generic/files/include/linux/ar8216_platform.h b/target/linux/generic/files/include/linux/ar8216_platform.h new file mode 100644 index 0000000..c6c6144 --- /dev/null +++ b/target/linux/generic/files/include/linux/ar8216_platform.h @@ -0,0 +1,83 @@ +/* + * AR8216 switch driver platform data + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef AR8216_PLATFORM_H +#define AR8216_PLATFORM_H + +enum ar8327_pad_mode { + AR8327_PAD_NC = 0, + AR8327_PAD_MAC2MAC_MII, + AR8327_PAD_MAC2MAC_GMII, + AR8327_PAD_MAC_SGMII, + AR8327_PAD_MAC2PHY_MII, + AR8327_PAD_MAC2PHY_GMII, + AR8327_PAD_MAC_RGMII, + AR8327_PAD_PHY_GMII, + AR8327_PAD_PHY_RGMII, + AR8327_PAD_PHY_MII, +}; + +enum ar8327_clk_delay_sel { + AR8327_CLK_DELAY_SEL0 = 0, + AR8327_CLK_DELAY_SEL1, + AR8327_CLK_DELAY_SEL2, + AR8327_CLK_DELAY_SEL3, +}; + +struct ar8327_pad_cfg { + enum ar8327_pad_mode mode; + bool rxclk_sel; + bool txclk_sel; + bool pipe_rxclk_sel; + bool txclk_delay_en; + bool rxclk_delay_en; + bool sgmii_delay_en; + enum ar8327_clk_delay_sel txclk_delay_sel; + enum ar8327_clk_delay_sel rxclk_delay_sel; +}; + +enum ar8327_port_speed { + AR8327_PORT_SPEED_10 = 0, + AR8327_PORT_SPEED_100, + AR8327_PORT_SPEED_1000, +}; + +struct ar8327_port_cfg { + int force_link:1; + enum ar8327_port_speed speed; + int txpause:1; + int rxpause:1; + int duplex:1; +}; + +struct ar8327_led_cfg { + u32 led_ctrl0; + u32 led_ctrl1; + u32 led_ctrl2; + u32 led_ctrl3; + bool open_drain; +}; + +struct ar8327_platform_data { + struct ar8327_pad_cfg *pad0_cfg; + struct ar8327_pad_cfg *pad5_cfg; + struct ar8327_pad_cfg *pad6_cfg; + struct ar8327_port_cfg port0_cfg; + struct ar8327_port_cfg port6_cfg; + struct ar8327_led_cfg *led_cfg; +}; + +#endif /* AR8216_PLATFORM_H */
\ No newline at end of file diff --git a/target/linux/generic/files/include/linux/ath5k_platform.h b/target/linux/generic/files/include/linux/ath5k_platform.h new file mode 100644 index 0000000..ec85224 --- /dev/null +++ b/target/linux/generic/files/include/linux/ath5k_platform.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> + * Copyright (c) 2010 Daniel Golle <daniel.golle@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH5K_PLATFORM_H +#define _LINUX_ATH5K_PLATFORM_H + +#define ATH5K_PLAT_EEP_MAX_WORDS 2048 + +struct ath5k_platform_data { + u16 *eeprom_data; + u8 *macaddr; +}; + +#endif /* _LINUX_ATH5K_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h new file mode 100644 index 0000000..a0b7531 --- /dev/null +++ b/target/linux/generic/files/include/linux/ath9k_platform.h @@ -0,0 +1,46 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH9K_PLATFORM_H +#define _LINUX_ATH9K_PLATFORM_H + +#define ATH9K_PLAT_EEP_MAX_WORDS 2048 + +struct ath9k_platform_data { + const char *eeprom_name; + + u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; + u8 *macaddr; + + int led_pin; + u32 gpio_mask; + u32 gpio_val; + + bool endian_check; + bool is_clk_25mhz; + bool disable_2ghz; + bool disable_5ghz; + + int (*get_mac_revision)(void); + int (*external_reset)(void); + + int num_leds; + const struct gpio_led *leds; +}; + +#endif /* _LINUX_ATH9K_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/glamo-engine.h b/target/linux/generic/files/include/linux/glamo-engine.h new file mode 100644 index 0000000..516d45f --- /dev/null +++ b/target/linux/generic/files/include/linux/glamo-engine.h @@ -0,0 +1,27 @@ +#ifndef __GLAMO_ENGINE_H +#define __GLAMO_ENGINE_H + +enum glamo_engine { + GLAMO_ENGINE_CAPTURE = 0, + GLAMO_ENGINE_ISP = 1, + GLAMO_ENGINE_JPEG = 2, + GLAMO_ENGINE_MPEG_ENC = 3, + GLAMO_ENGINE_MPEG_DEC = 4, + GLAMO_ENGINE_LCD = 5, + GLAMO_ENGINE_CMDQ = 6, + GLAMO_ENGINE_2D = 7, + GLAMO_ENGINE_3D = 8, + GLAMO_ENGINE_MMC = 9, + GLAMO_ENGINE_MICROP0 = 10, + GLAMO_ENGINE_RISC = 11, + GLAMO_ENGINE_MICROP1_MPEG_ENC = 12, + GLAMO_ENGINE_MICROP1_MPEG_DEC = 13, +#if 0 + GLAMO_ENGINE_H264_DEC = 14, + GLAMO_ENGINE_RISC1 = 15, + GLAMO_ENGINE_SPI = 16, +#endif + __NUM_GLAMO_ENGINES +}; + +#endif diff --git a/target/linux/generic/files/include/linux/glamofb.h b/target/linux/generic/files/include/linux/glamofb.h new file mode 100644 index 0000000..5f9fab5 --- /dev/null +++ b/target/linux/generic/files/include/linux/glamofb.h @@ -0,0 +1,35 @@ +#ifndef _LINUX_GLAMOFB_H +#define _LINUX_GLAMOFB_H + +#include <linux/fb.h> + +#ifdef __KERNEL__ + +struct glamo_core; +struct glamofb_handle; + +struct glamo_fb_platform_data { + int width, height; + + int num_modes; + struct fb_videomode *modes; + + struct glamo_core *core; +}; + +int glamofb_cmd_mode(struct glamofb_handle *gfb, int on); +int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val); + +#ifdef CONFIG_MFD_GLAMO +void glamo_lcm_reset(struct platform_device *pdev, int level); +#else +#define glamo_lcm_reset(...) do {} while (0) +#endif + +#endif + +#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32) +#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32) +#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32) + +#endif diff --git a/target/linux/generic/files/include/linux/gpio_buttons.h b/target/linux/generic/files/include/linux/gpio_buttons.h new file mode 100644 index 0000000..f85b993 --- /dev/null +++ b/target/linux/generic/files/include/linux/gpio_buttons.h @@ -0,0 +1,33 @@ +/* + * Definitions for the GPIO buttons interface driver + * + * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This file was based on: /include/linux/gpio_keys.h + * The original gpio_keys.h seems not to have a license. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _GPIO_BUTTONS_H_ +#define _GPIO_BUTTONS_H_ + +struct gpio_button { + int gpio; /* GPIO line number */ + int active_low; + char *desc; /* button description */ + int type; /* input event type (EV_KEY, EV_SW) */ + int code; /* input event code (KEY_*, SW_*) */ + int threshold; /* count threshold */ +}; + +struct gpio_buttons_platform_data { + struct gpio_button *buttons; + int nbuttons; /* number of buttons */ + int poll_interval; /* polling interval */ +}; + +#endif /* _GPIO_BUTTONS_H_ */ diff --git a/target/linux/generic/files/include/linux/myloader.h b/target/linux/generic/files/include/linux/myloader.h new file mode 100644 index 0000000..d89e415 --- /dev/null +++ b/target/linux/generic/files/include/linux/myloader.h @@ -0,0 +1,121 @@ +/* + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_SYS_PARAMS 0x20021107 +#define MYLO_MAGIC_PARTITIONS 0x20021103 +#define MYLO_MAGIC_BOARD_PARAMS 0x20021103 + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the Atheros AR2317 */ +#define DEVID_COMPEX_NP25G 0x05E6 +#define DEVID_COMPEX_WPE53G 0x05DC + +/* Devices based on the Atheros AR71xx */ +#define DEVID_COMPEX_WP543 0x0640 +#define DEVID_COMPEX_WPE72 0x0672 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_LZMA 0x0100 /* partition data compressed by LZMA */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* size of boot FLASH in bytes */ + uint32_t dram_size; /* size of onboard RAM in bytes */ +}; + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/generic/files/include/linux/platform_data/.svn/entries b/target/linux/generic/files/include/linux/platform_data/.svn/entries new file mode 100644 index 0000000..4be40eb --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/.svn/entries @@ -0,0 +1,62 @@ +10 + +dir +36060 +svn://svn.openwrt.org/openwrt/trunk/target/linux/generic/files/include/linux/platform_data +svn://svn.openwrt.org/openwrt + + + +2013-01-23T10:12:33.903618Z +35305 +jogo + + + + + + + + + + + + + + +3c298f89-4303-0410-b956-a3cf2f4a3e73 + +b53.h +file + + + + +2013-03-17T12:13:03.000000Z +c3b404feb6dbd7ff7132f94841e8ba6b +2013-01-23T10:12:33.903618Z +35305 +jogo + + + + + + + + + + + + + + + + + + + + + +1089 + diff --git a/target/linux/generic/files/include/linux/platform_data/.svn/text-base/b53.h.svn-base b/target/linux/generic/files/include/linux/platform_data/.svn/text-base/b53.h.svn-base new file mode 100644 index 0000000..7842741 --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/.svn/text-base/b53.h.svn-base @@ -0,0 +1,36 @@ +/* + * B53 platform data + * + * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __B53_H +#define __B53_H + +#include <linux/kernel.h> + +struct b53_platform_data { + u32 chip_id; + u16 enabled_ports; + + /* allow to specify an ethX alias */ + const char *alias; + + /* only used by MMAP'd driver */ + unsigned big_endian:1; + void __iomem *regs; +}; + +#endif diff --git a/target/linux/generic/files/include/linux/platform_data/b53.h b/target/linux/generic/files/include/linux/platform_data/b53.h new file mode 100644 index 0000000..7842741 --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/b53.h @@ -0,0 +1,36 @@ +/* + * B53 platform data + * + * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __B53_H +#define __B53_H + +#include <linux/kernel.h> + +struct b53_platform_data { + u32 chip_id; + u16 enabled_ports; + + /* allow to specify an ethX alias */ + const char *alias; + + /* only used by MMAP'd driver */ + unsigned big_endian:1; + void __iomem *regs; +}; + +#endif diff --git a/target/linux/generic/files/include/linux/pwm/.svn/entries b/target/linux/generic/files/include/linux/pwm/.svn/entries new file mode 100644 index 0000000..f5423af --- /dev/null +++ b/target/linux/generic/files/include/linux/pwm/.svn/entries @@ -0,0 +1,62 @@ +10 + +dir +36060 +svn://svn.openwrt.org/openwrt/trunk/target/linux/generic/files/include/linux/pwm +svn://svn.openwrt.org/openwrt + + + +2010-06-26T20:42:58.993070Z +21952 +nbd + + + + + + + + + + + + + + +3c298f89-4303-0410-b956-a3cf2f4a3e73 + +pwm.h +file + + + + +2013-03-17T12:13:03.000000Z +612cfb566698eea4147f7f15cb044817 +2010-06-26T20:42:58.993070Z +21952 +nbd + + + + + + + + + + + + + + + + + + + + + +3949 + diff --git a/target/linux/generic/files/include/linux/pwm/.svn/text-base/pwm.h.svn-base b/target/linux/generic/files/include/linux/pwm/.svn/text-base/pwm.h.svn-base new file mode 100644 index 0000000..e01cca9 --- /dev/null +++ b/target/linux/generic/files/include/linux/pwm/.svn/text-base/pwm.h.svn-base @@ -0,0 +1,165 @@ +/* + * include/linux/pwm.h + * + * Copyright (C) 2008 Bill Gatliff < bgat@billgatliff.com> + * + * This program is free software; you may redistribute and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ +#ifndef __LINUX_PWM_H +#define __LINUX_PWM_H + +enum { + PWM_CONFIG_DUTY_TICKS = BIT(0), + PWM_CONFIG_PERIOD_TICKS = BIT(1), + PWM_CONFIG_POLARITY = BIT(2), + PWM_CONFIG_START = BIT(3), + PWM_CONFIG_STOP = BIT(4), + + PWM_CONFIG_HANDLER = BIT(5), + + PWM_CONFIG_DUTY_NS = BIT(6), + PWM_CONFIG_DUTY_PERCENT = BIT(7), + PWM_CONFIG_PERIOD_NS = BIT(8), +}; + +struct pwm_channel; +struct work_struct; + +typedef int (*pwm_handler_t)(struct pwm_channel *p, void *data); +typedef void (*pwm_callback_t)(struct pwm_channel *p); + +struct pwm_channel_config { + int config_mask; + unsigned long duty_ticks; + unsigned long period_ticks; + int polarity; + + pwm_handler_t handler; + + unsigned long duty_ns; + unsigned long period_ns; + int duty_percent; +}; + +struct pwm_device { + struct list_head list; + spinlock_t list_lock; + struct device *dev; + struct module *owner; + struct pwm_channel *channels; + + const char *bus_id; + int nchan; + + int (*request) (struct pwm_channel *p); + void (*free) (struct pwm_channel *p); + int (*config) (struct pwm_channel *p, + struct pwm_channel_config *c); + int (*config_nosleep)(struct pwm_channel *p, + struct pwm_channel_config *c); + int (*synchronize) (struct pwm_channel *p, + struct pwm_channel *to_p); + int (*unsynchronize)(struct pwm_channel *p, + struct pwm_channel *from_p); + int (*set_callback) (struct pwm_channel *p, + pwm_callback_t callback); +}; + +int pwm_register(struct pwm_device *pwm); +int pwm_unregister(struct pwm_device *pwm); + +enum { + FLAG_REQUESTED = 0, + FLAG_STOP = 1, +}; + +struct pwm_channel { + struct list_head list; + struct pwm_device *pwm; + const char *requester; + pid_t pid; + int chan; + unsigned long flags; + unsigned long tick_hz; + + spinlock_t lock; + struct completion complete; + + pwm_callback_t callback; + + struct work_struct handler_work; + pwm_handler_t handler; + void *handler_data; + + int active_high; + unsigned long period_ticks; + unsigned long duty_ticks; +}; + +struct gpio_pwm_platform_data { + int gpio; +}; + +struct pwm_channel * +pwm_request(const char *bus_id, int chan, + const char *requester); + +void pwm_free(struct pwm_channel *pwm); + +int pwm_config_nosleep(struct pwm_channel *pwm, + struct pwm_channel_config *c); + +int pwm_config(struct pwm_channel *pwm, + struct pwm_channel_config *c); + +unsigned long pwm_ns_to_ticks(struct pwm_channel *pwm, + unsigned long nsecs); + +unsigned long pwm_ticks_to_ns(struct pwm_channel *pwm, + unsigned long ticks); + +int pwm_set_period_ns(struct pwm_channel *pwm, + unsigned long period_ns); + +unsigned long int pwm_get_period_ns(struct pwm_channel *pwm); + +int pwm_set_duty_ns(struct pwm_channel *pwm, + unsigned long duty_ns); + +int pwm_set_duty_percent(struct pwm_channel *pwm, + int percent); + +unsigned long pwm_get_duty_ns(struct pwm_channel *pwm); + +int pwm_set_polarity(struct pwm_channel *pwm, + int active_high); + +int pwm_start(struct pwm_channel *pwm); + +int pwm_stop(struct pwm_channel *pwm); + +int pwm_set_handler(struct pwm_channel *pwm, + pwm_handler_t handler, + void *data); + +int pwm_synchronize(struct pwm_channel *p, + struct pwm_channel *to_p); + + +int pwm_unsynchronize(struct pwm_channel *p, + struct pwm_channel *from_p); + + +#endif /* __LINUX_PWM_H */ diff --git a/target/linux/generic/files/include/linux/pwm/pwm.h b/target/linux/generic/files/include/linux/pwm/pwm.h new file mode 100644 index 0000000..e01cca9 --- /dev/null +++ b/target/linux/generic/files/include/linux/pwm/pwm.h @@ -0,0 +1,165 @@ +/* + * include/linux/pwm.h + * + * Copyright (C) 2008 Bill Gatliff < bgat@billgatliff.com> + * + * This program is free software; you may redistribute and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ +#ifndef __LINUX_PWM_H +#define __LINUX_PWM_H + +enum { + PWM_CONFIG_DUTY_TICKS = BIT(0), + PWM_CONFIG_PERIOD_TICKS = BIT(1), + PWM_CONFIG_POLARITY = BIT(2), + PWM_CONFIG_START = BIT(3), + PWM_CONFIG_STOP = BIT(4), + + PWM_CONFIG_HANDLER = BIT(5), + + PWM_CONFIG_DUTY_NS = BIT(6), + PWM_CONFIG_DUTY_PERCENT = BIT(7), + PWM_CONFIG_PERIOD_NS = BIT(8), +}; + +struct pwm_channel; +struct work_struct; + +typedef int (*pwm_handler_t)(struct pwm_channel *p, void *data); +typedef void (*pwm_callback_t)(struct pwm_channel *p); + +struct pwm_channel_config { + int config_mask; + unsigned long duty_ticks; + unsigned long period_ticks; + int polarity; + + pwm_handler_t handler; + + unsigned long duty_ns; + unsigned long period_ns; + int duty_percent; +}; + +struct pwm_device { + struct list_head list; + spinlock_t list_lock; + struct device *dev; + struct module *owner; + struct pwm_channel *channels; + + const char *bus_id; + int nchan; + + int (*request) (struct pwm_channel *p); + void (*free) (struct pwm_channel *p); + int (*config) (struct pwm_channel *p, + struct pwm_channel_config *c); + int (*config_nosleep)(struct pwm_channel *p, + struct pwm_channel_config *c); + int (*synchronize) (struct pwm_channel *p, + struct pwm_channel *to_p); + int (*unsynchronize)(struct pwm_channel *p, + struct pwm_channel *from_p); + int (*set_callback) (struct pwm_channel *p, + pwm_callback_t callback); +}; + +int pwm_register(struct pwm_device *pwm); +int pwm_unregister(struct pwm_device *pwm); + +enum { + FLAG_REQUESTED = 0, + FLAG_STOP = 1, +}; + +struct pwm_channel { + struct list_head list; + struct pwm_device *pwm; + const char *requester; + pid_t pid; + int chan; + unsigned long flags; + unsigned long tick_hz; + + spinlock_t lock; + struct completion complete; + + pwm_callback_t callback; + + struct work_struct handler_work; + pwm_handler_t handler; + void *handler_data; + + int active_high; + unsigned long period_ticks; + unsigned long duty_ticks; +}; + +struct gpio_pwm_platform_data { + int gpio; +}; + +struct pwm_channel * +pwm_request(const char *bus_id, int chan, + const char *requester); + +void pwm_free(struct pwm_channel *pwm); + +int pwm_config_nosleep(struct pwm_channel *pwm, + struct pwm_channel_config *c); + +int pwm_config(struct pwm_channel *pwm, + struct pwm_channel_config *c); + +unsigned long pwm_ns_to_ticks(struct pwm_channel *pwm, + unsigned long nsecs); + +unsigned long pwm_ticks_to_ns(struct pwm_channel *pwm, + unsigned long ticks); + +int pwm_set_period_ns(struct pwm_channel *pwm, + unsigned long period_ns); + +unsigned long int pwm_get_period_ns(struct pwm_channel *pwm); + +int pwm_set_duty_ns(struct pwm_channel *pwm, + unsigned long duty_ns); + +int pwm_set_duty_percent(struct pwm_channel *pwm, + int percent); + +unsigned long pwm_get_duty_ns(struct pwm_channel *pwm); + +int pwm_set_polarity(struct pwm_channel *pwm, + int active_high); + +int pwm_start(struct pwm_channel *pwm); + +int pwm_stop(struct pwm_channel *pwm); + +int pwm_set_handler(struct pwm_channel *pwm, + pwm_handler_t handler, + void *data); + +int pwm_synchronize(struct pwm_channel *p, + struct pwm_channel *to_p); + + +int pwm_unsynchronize(struct pwm_channel *p, + struct pwm_channel *from_p); + + +#endif /* __LINUX_PWM_H */ diff --git a/target/linux/generic/files/include/linux/routerboot.h b/target/linux/generic/files/include/linux/routerboot.h new file mode 100644 index 0000000..0244843 --- /dev/null +++ b/target/linux/generic/files/include/linux/routerboot.h @@ -0,0 +1,105 @@ +/* + * Mikrotik's RouterBOOT definitions + * + * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ROUTERBOOT_H +#define _ROUTERBOOT_H + +#define RB_MAC_SIZE 6 + +/* + * Magic numbers + */ +#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ +#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ +#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ + +#define RB_ID_TERMINATOR 0 + +/* + * ID values for Hardware settings + */ +#define RB_ID_HARD_01 1 +#define RB_ID_HARD_02 2 +#define RB_ID_FLASH_INFO 3 +#define RB_ID_MAC_ADDRESS_PACK 4 +#define RB_ID_BOARD_NAME 5 +#define RB_ID_BIOS_VERSION 6 +#define RB_ID_HARD_07 7 +#define RB_ID_SDRAM_TIMINGS 8 +#define RB_ID_DEVICE_TIMINGS 9 +#define RB_ID_SOFTWARE_ID 10 +#define RB_ID_SERIAL_NUMBER 11 +#define RB_ID_HARD_12 12 +#define RB_ID_MEMORY_SIZE 13 +#define RB_ID_MAC_ADDRESS_COUNT 14 +#define RB_ID_WLAN_DATA 22 + +/* + * ID values for Software settings + */ +#define RB_ID_UART_SPEED 1 +#define RB_ID_BOOT_DELAY 2 +#define RB_ID_BOOT_DEVICE 3 +#define RB_ID_BOOT_KEY 4 +#define RB_ID_CPU_MODE 5 +#define RB_ID_FW_VERSION 6 +#define RB_ID_SOFT_07 7 +#define RB_ID_SOFT_08 8 +#define RB_ID_BOOT_PROTOCOL 9 +#define RB_ID_SOFT_10 10 +#define RB_ID_SOFT_11 11 + +/* + * UART_SPEED values + */ +#define RB_UART_SPEED_115200 0 +#define RB_UART_SPEED_57600 1 +#define RB_UART_SPEED_38400 2 +#define RB_UART_SPEED_19200 3 +#define RB_UART_SPEED_9600 4 +#define RB_UART_SPEED_4800 5 +#define RB_UART_SPEED_2400 6 +#define RB_UART_SPEED_1200 7 + +/* + * BOOT_DELAY values + */ +#define RB_BOOT_DELAY_0SEC 0 +#define RB_BOOT_DELAY_1SEC 1 +#define RB_BOOT_DELAY_2SEC 2 + +/* + * BOOT_DEVICE values + */ +#define RB_BOOT_DEVICE_ETHER 0 +#define RB_BOOT_DEVICE_NANDETH 1 +#define RB_BOOT_DEVICE_ETHONCE 2 +#define RB_BOOT_DEVICE_NANDONLY 3 + +/* + * BOOT_KEY values + */ +#define RB_BOOT_KEY_ANY 0 +#define RB_BOOT_KEY_DEL 1 + +/* + * CPU_MODE values + */ +#define RB_CPU_MODE_POWERSAVE 0 +#define RB_CPU_MODE_REGULAR 1 + +/* + * BOOT_PROTOCOL values + */ +#define RB_BOOT_PROTOCOL_BOOTP 0 +#define RB_BOOT_PROTOCOL_DHCP 1 + +#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/generic/files/include/linux/rt2x00_platform.h b/target/linux/generic/files/include/linux/rt2x00_platform.h new file mode 100644 index 0000000..80483ef --- /dev/null +++ b/target/linux/generic/files/include/linux/rt2x00_platform.h @@ -0,0 +1,24 @@ +/* + * Platform data definition for the rt2x00 driver + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _RT2X00_PLATFORM_H +#define _RT2X00_PLATFORM_H + +struct rt2x00_platform_data { + char *eeprom_file_name; + const u8 *mac_address; + + int disable_2ghz; + int disable_5ghz; + int clk_is_20mhz; +}; + +#endif /* _RT2X00_PLATFORM_H */ diff --git a/target/linux/generic/files/include/linux/rtl8366.h b/target/linux/generic/files/include/linux/rtl8366.h new file mode 100644 index 0000000..78daed2 --- /dev/null +++ b/target/linux/generic/files/include/linux/rtl8366.h @@ -0,0 +1,40 @@ +/* + * Platform data definition for the Realtek RTL8366RB/S ethernet switch driver + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RTL8366_H +#define _RTL8366_H + +#define RTL8366_DRIVER_NAME "rtl8366" +#define RTL8366S_DRIVER_NAME "rtl8366s" +#define RTL8366RB_DRIVER_NAME "rtl8366rb" + +enum rtl8366_type { + RTL8366_TYPE_UNKNOWN, + RTL8366_TYPE_S, + RTL8366_TYPE_RB, +}; + +struct rtl8366_initval { + unsigned reg; + u16 val; +}; + +struct rtl8366_platform_data { + unsigned gpio_sda; + unsigned gpio_sck; + void (*hw_reset)(bool active); + + unsigned num_initvals; + struct rtl8366_initval *initvals; +}; + +enum rtl8366_type rtl8366_smi_detect(struct rtl8366_platform_data *pdata); + +#endif /* _RTL8366_H */ diff --git a/target/linux/generic/files/include/linux/rtl8367.h b/target/linux/generic/files/include/linux/rtl8367.h new file mode 100644 index 0000000..855de6a --- /dev/null +++ b/target/linux/generic/files/include/linux/rtl8367.h @@ -0,0 +1,60 @@ +/* + * Platform data definition for the Realtek RTL8367 ethernet switch driver + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RTL8367_H +#define _RTL8367_H + +#define RTL8367_DRIVER_NAME "rtl8367" +#define RTL8367B_DRIVER_NAME "rtl8367b" + +enum rtl8367_port_speed { + RTL8367_PORT_SPEED_10 = 0, + RTL8367_PORT_SPEED_100, + RTL8367_PORT_SPEED_1000, +}; + +struct rtl8367_port_ability { + int force_mode; + int nway; + int txpause; + int rxpause; + int link; + int duplex; + enum rtl8367_port_speed speed; +}; + +enum rtl8367_extif_mode { + RTL8367_EXTIF_MODE_DISABLED = 0, + RTL8367_EXTIF_MODE_RGMII, + RTL8367_EXTIF_MODE_MII_MAC, + RTL8367_EXTIF_MODE_MII_PHY, + RTL8367_EXTIF_MODE_TMII_MAC, + RTL8367_EXTIF_MODE_TMII_PHY, + RTL8367_EXTIF_MODE_GMII, + RTL8367_EXTIF_MODE_RGMII_33V, +}; + +struct rtl8367_extif_config { + unsigned int txdelay; + unsigned int rxdelay; + enum rtl8367_extif_mode mode; + struct rtl8367_port_ability ability; +}; + +struct rtl8367_platform_data { + unsigned gpio_sda; + unsigned gpio_sck; + void (*hw_reset)(bool active); + + struct rtl8367_extif_config *extif0_cfg; + struct rtl8367_extif_config *extif1_cfg; +}; + +#endif /* _RTL8367_H */ diff --git a/target/linux/generic/files/include/linux/switch.h b/target/linux/generic/files/include/linux/switch.h new file mode 100644 index 0000000..bd4fae4 --- /dev/null +++ b/target/linux/generic/files/include/linux/switch.h @@ -0,0 +1,160 @@ +/* + * switch.h: Switch configuration API + * + * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef _LINUX_SWITCH_H +#define _LINUX_SWITCH_H + +#include <net/genetlink.h> +#include <uapi/linux/switch.h> + +struct switch_dev; +struct switch_op; +struct switch_val; +struct switch_attr; +struct switch_attrlist; +struct switch_led_trigger; + +int register_switch(struct switch_dev *dev, struct net_device *netdev); +void unregister_switch(struct switch_dev *dev); + +/** + * struct switch_attrlist - attribute list + * + * @n_attr: number of attributes + * @attr: pointer to the attributes array + */ +struct switch_attrlist { + int n_attr; + const struct switch_attr *attr; +}; + +enum switch_port_speed { + SWITCH_PORT_SPEED_UNKNOWN = 0, + SWITCH_PORT_SPEED_10 = 10, + SWITCH_PORT_SPEED_100 = 100, + SWITCH_PORT_SPEED_1000 = 1000, +}; + +struct switch_port_link { + bool link; + bool duplex; + bool aneg; + bool tx_flow; + bool rx_flow; + enum switch_port_speed speed; +}; + +struct switch_port_stats { + unsigned long tx_bytes; + unsigned long rx_bytes; +}; + +/** + * struct switch_dev_ops - switch driver operations + * + * @attr_global: global switch attribute list + * @attr_port: port attribute list + * @attr_vlan: vlan attribute list + * + * Callbacks: + * + * @get_vlan_ports: read the port list of a VLAN + * @set_vlan_ports: set the port list of a VLAN + * + * @get_port_pvid: get the primary VLAN ID of a port + * @set_port_pvid: set the primary VLAN ID of a port + * + * @apply_config: apply all changed settings to the switch + * @reset_switch: resetting the switch + */ +struct switch_dev_ops { + struct switch_attrlist attr_global, attr_port, attr_vlan; + + int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + + int (*get_port_pvid)(struct switch_dev *dev, int port, int *val); + int (*set_port_pvid)(struct switch_dev *dev, int port, int val); + + int (*apply_config)(struct switch_dev *dev); + int (*reset_switch)(struct switch_dev *dev); + + int (*get_port_link)(struct switch_dev *dev, int port, + struct switch_port_link *link); + int (*get_port_stats)(struct switch_dev *dev, int port, + struct switch_port_stats *stats); +}; + +struct switch_dev { + const struct switch_dev_ops *ops; + /* will be automatically filled */ + char devname[IFNAMSIZ]; + + const char *name; + /* NB: either alias or netdev must be set */ + const char *alias; + struct net_device *netdev; + + int ports; + int vlans; + int cpu_port; + + /* the following fields are internal for swconfig */ + int id; + struct list_head dev_list; + unsigned long def_global, def_port, def_vlan; + + struct mutex sw_mutex; + struct switch_port *portbuf; + + char buf[128]; + +#ifdef CONFIG_SWCONFIG_LEDS + struct switch_led_trigger *led_trigger; +#endif +}; + +struct switch_port { + u32 id; + u32 flags; +}; + +struct switch_val { + const struct switch_attr *attr; + int port_vlan; + int len; + union { + const char *s; + u32 i; + struct switch_port *ports; + } value; +}; + +struct switch_attr { + int disabled; + int type; + const char *name; + const char *description; + + int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + + /* for driver internal use */ + int id; + int ofs; + int max; +}; + +#endif /* _LINUX_SWITCH_H */ diff --git a/target/linux/generic/files/include/uapi/.svn/entries b/target/linux/generic/files/include/uapi/.svn/entries new file mode 100644 index 0000000..1140225 --- /dev/null +++ b/target/linux/generic/files/include/uapi/.svn/entries @@ -0,0 +1,31 @@ +10 + +dir +36060 +svn://svn.openwrt.org/openwrt/trunk/target/linux/generic/files/include/uapi +svn://svn.openwrt.org/openwrt + + + +2012-12-14T12:11:41.962184Z +34677 +juhosg + + + + + + + + + + + + + + +3c298f89-4303-0410-b956-a3cf2f4a3e73 + +linux +dir + diff --git a/target/linux/generic/files/include/uapi/linux/.svn/entries b/target/linux/generic/files/include/uapi/linux/.svn/entries new file mode 100644 index 0000000..11ea943 --- /dev/null +++ b/target/linux/generic/files/include/uapi/linux/.svn/entries @@ -0,0 +1,62 @@ +10 + +dir +36060 +svn://svn.openwrt.org/openwrt/trunk/target/linux/generic/files/include/uapi/linux +svn://svn.openwrt.org/openwrt + + + +2012-12-14T12:11:41.962184Z +34677 +juhosg + + + + + + + + + + + + + + +3c298f89-4303-0410-b956-a3cf2f4a3e73 + +switch.h +file + + + + +2013-03-17T12:13:03.000000Z +381adfe5f75fde5d2afc469d8064e596 +2012-12-14T12:11:41.962184Z +34677 +juhosg +has-props + + + + + + + + + + + + + + + + + + + + +2076 + diff --git a/target/linux/generic/files/include/uapi/linux/.svn/prop-base/switch.h.svn-base b/target/linux/generic/files/include/uapi/linux/.svn/prop-base/switch.h.svn-base new file mode 100644 index 0000000..bdbd305 --- /dev/null +++ b/target/linux/generic/files/include/uapi/linux/.svn/prop-base/switch.h.svn-base @@ -0,0 +1,5 @@ +K 13 +svn:eol-style +V 6 +native +END diff --git a/target/linux/generic/files/include/uapi/linux/.svn/text-base/switch.h.svn-base b/target/linux/generic/files/include/uapi/linux/.svn/text-base/switch.h.svn-base new file mode 100644 index 0000000..581caf1 --- /dev/null +++ b/target/linux/generic/files/include/uapi/linux/.svn/text-base/switch.h.svn-base @@ -0,0 +1,94 @@ +/* + * switch.h: Switch configuration API + * + * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UAPI_LINUX_SWITCH_H +#define _UAPI_LINUX_SWITCH_H + +#include <linux/types.h> +#include <linux/netdevice.h> +#include <linux/netlink.h> +#include <linux/genetlink.h> +#ifndef __KERNEL__ +#include <netlink/netlink.h> +#include <netlink/genl/genl.h> +#include <netlink/genl/ctrl.h> +#endif + +/* main attributes */ +enum { + SWITCH_ATTR_UNSPEC, + /* global */ + SWITCH_ATTR_TYPE, + /* device */ + SWITCH_ATTR_ID, + SWITCH_ATTR_DEV_NAME, + SWITCH_ATTR_ALIAS, + SWITCH_ATTR_NAME, + SWITCH_ATTR_VLANS, + SWITCH_ATTR_PORTS, + SWITCH_ATTR_CPU_PORT, + /* attributes */ + SWITCH_ATTR_OP_ID, + SWITCH_ATTR_OP_TYPE, + SWITCH_ATTR_OP_NAME, + SWITCH_ATTR_OP_PORT, + SWITCH_ATTR_OP_VLAN, + SWITCH_ATTR_OP_VALUE_INT, + SWITCH_ATTR_OP_VALUE_STR, + SWITCH_ATTR_OP_VALUE_PORTS, + SWITCH_ATTR_OP_DESCRIPTION, + /* port lists */ + SWITCH_ATTR_PORT, + SWITCH_ATTR_MAX +}; + +/* commands */ +enum { + SWITCH_CMD_UNSPEC, + SWITCH_CMD_GET_SWITCH, + SWITCH_CMD_NEW_ATTR, + SWITCH_CMD_LIST_GLOBAL, + SWITCH_CMD_GET_GLOBAL, + SWITCH_CMD_SET_GLOBAL, + SWITCH_CMD_LIST_PORT, + SWITCH_CMD_GET_PORT, + SWITCH_CMD_SET_PORT, + SWITCH_CMD_LIST_VLAN, + SWITCH_CMD_GET_VLAN, + SWITCH_CMD_SET_VLAN +}; + +/* data types */ +enum switch_val_type { + SWITCH_TYPE_UNSPEC, + SWITCH_TYPE_INT, + SWITCH_TYPE_STRING, + SWITCH_TYPE_PORTS, + SWITCH_TYPE_NOVAL, +}; + +/* port nested attributes */ +enum { + SWITCH_PORT_UNSPEC, + SWITCH_PORT_ID, + SWITCH_PORT_FLAG_TAGGED, + SWITCH_PORT_ATTR_MAX +}; + +#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000 + + +#endif /* _UAPI_LINUX_SWITCH_H */ diff --git a/target/linux/generic/files/include/uapi/linux/switch.h b/target/linux/generic/files/include/uapi/linux/switch.h new file mode 100644 index 0000000..581caf1 --- /dev/null +++ b/target/linux/generic/files/include/uapi/linux/switch.h @@ -0,0 +1,94 @@ +/* + * switch.h: Switch configuration API + * + * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UAPI_LINUX_SWITCH_H +#define _UAPI_LINUX_SWITCH_H + +#include <linux/types.h> +#include <linux/netdevice.h> +#include <linux/netlink.h> +#include <linux/genetlink.h> +#ifndef __KERNEL__ +#include <netlink/netlink.h> +#include <netlink/genl/genl.h> +#include <netlink/genl/ctrl.h> +#endif + +/* main attributes */ +enum { + SWITCH_ATTR_UNSPEC, + /* global */ + SWITCH_ATTR_TYPE, + /* device */ + SWITCH_ATTR_ID, + SWITCH_ATTR_DEV_NAME, + SWITCH_ATTR_ALIAS, + SWITCH_ATTR_NAME, + SWITCH_ATTR_VLANS, + SWITCH_ATTR_PORTS, + SWITCH_ATTR_CPU_PORT, + /* attributes */ + SWITCH_ATTR_OP_ID, + SWITCH_ATTR_OP_TYPE, + SWITCH_ATTR_OP_NAME, + SWITCH_ATTR_OP_PORT, + SWITCH_ATTR_OP_VLAN, + SWITCH_ATTR_OP_VALUE_INT, + SWITCH_ATTR_OP_VALUE_STR, + SWITCH_ATTR_OP_VALUE_PORTS, + SWITCH_ATTR_OP_DESCRIPTION, + /* port lists */ + SWITCH_ATTR_PORT, + SWITCH_ATTR_MAX +}; + +/* commands */ +enum { + SWITCH_CMD_UNSPEC, + SWITCH_CMD_GET_SWITCH, + SWITCH_CMD_NEW_ATTR, + SWITCH_CMD_LIST_GLOBAL, + SWITCH_CMD_GET_GLOBAL, + SWITCH_CMD_SET_GLOBAL, + SWITCH_CMD_LIST_PORT, + SWITCH_CMD_GET_PORT, + SWITCH_CMD_SET_PORT, + SWITCH_CMD_LIST_VLAN, + SWITCH_CMD_GET_VLAN, + SWITCH_CMD_SET_VLAN +}; + +/* data types */ +enum switch_val_type { + SWITCH_TYPE_UNSPEC, + SWITCH_TYPE_INT, + SWITCH_TYPE_STRING, + SWITCH_TYPE_PORTS, + SWITCH_TYPE_NOVAL, +}; + +/* port nested attributes */ +enum { + SWITCH_PORT_UNSPEC, + SWITCH_PORT_ID, + SWITCH_PORT_FLAG_TAGGED, + SWITCH_PORT_ATTR_MAX +}; + +#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000 + + +#endif /* _UAPI_LINUX_SWITCH_H */ |