fishHEADmaster

7 files changed, 364 insertions, 0 deletions

diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/.svn/entries b/target/linux/ar71xx/base-files/etc/hotplug.d/.svn/entries
new file mode 100644
index 0000000..9473c20
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/.svn/entries
@@ -0,0 +1,34 @@
+10
+
+dir
+36060
+svn://svn.openwrt.org/openwrt/trunk/target/linux/ar71xx/base-files/etc/hotplug.d
+svn://svn.openwrt.org/openwrt
+
+
+
+2013-03-03T21:59:34.159649Z
+35865
+luka
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+3c298f89-4303-0410-b956-a3cf2f4a3e73
+
+net
+dir
+
+firmware
+dir
+
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/.svn/entries b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/.svn/entries
new file mode 100644
index 0000000..efaa0ab
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/.svn/entries
@@ -0,0 +1,62 @@
+10
+
+dir
+36060
+svn://svn.openwrt.org/openwrt/trunk/target/linux/ar71xx/base-files/etc/hotplug.d/firmware
+svn://svn.openwrt.org/openwrt
+
+
+
+2012-12-19T16:07:50.872491Z
+34793
+mirko
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+3c298f89-4303-0410-b956-a3cf2f4a3e73
+
+10-ath9k-eeprom
+file
+
+
+
+
+2013-03-17T12:12:43.000000Z
+ddb850f4e9123e7ca01e4265d03d6b28
+2012-12-19T16:07:50.872491Z
+34793
+mirko
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+882
+
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/.svn/text-base/10-ath9k-eeprom.svn-base b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/.svn/text-base/10-ath9k-eeprom.svn-base
new file mode 100644
index 0000000..0fd6813
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/.svn/text-base/10-ath9k-eeprom.svn-base
@@ -0,0 +1,52 @@
+#!/bin/sh
+
+ath9k_eeprom_die() {
+	echo "ath9k eeprom: " "$*"
+	exit 1
+}
+
+ath9k_eeprom_extract() {
+	local part=$1
+	local offset=$2
+	local count=$3
+	local mtd
+
+	. /lib/functions.sh
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || \
+		ath9k_eeprom_die "no mtd device found for partition $part"
+
+	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+		ath9k_eeprom_die "failed to extract from $mtd"
+}
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/ar71xx.sh
+
+board=$(ar71xx_board_name)
+
+case "$FIRMWARE" in
+"soc_wmac.eeprom")
+	case $board in
+	wndr4300)
+		ath9k_eeprom_extract "caldata" 4096 2048
+		;;
+	*)
+		ath9k_eeprom_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+
+"pci_wmac0.eeprom")
+	case $board in
+	wndr4300)
+		ath9k_eeprom_extract "caldata" 20480 2048
+		;;
+	*)
+		ath9k_eeprom_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+esac
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
new file mode 100644
index 0000000..0fd6813
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -0,0 +1,52 @@
+#!/bin/sh
+
+ath9k_eeprom_die() {
+	echo "ath9k eeprom: " "$*"
+	exit 1
+}
+
+ath9k_eeprom_extract() {
+	local part=$1
+	local offset=$2
+	local count=$3
+	local mtd
+
+	. /lib/functions.sh
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || \
+		ath9k_eeprom_die "no mtd device found for partition $part"
+
+	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+		ath9k_eeprom_die "failed to extract from $mtd"
+}
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/ar71xx.sh
+
+board=$(ar71xx_board_name)
+
+case "$FIRMWARE" in
+"soc_wmac.eeprom")
+	case $board in
+	wndr4300)
+		ath9k_eeprom_extract "caldata" 4096 2048
+		;;
+	*)
+		ath9k_eeprom_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+
+"pci_wmac0.eeprom")
+	case $board in
+	wndr4300)
+		ath9k_eeprom_extract "caldata" 20480 2048
+		;;
+	*)
+		ath9k_eeprom_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+esac
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/.svn/entries b/target/linux/ar71xx/base-files/etc/hotplug.d/net/.svn/entries
new file mode 100644
index 0000000..4b7e405
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/.svn/entries
@@ -0,0 +1,62 @@
+10
+
+dir
+36060
+svn://svn.openwrt.org/openwrt/trunk/target/linux/ar71xx/base-files/etc/hotplug.d/net
+svn://svn.openwrt.org/openwrt
+
+
+
+2013-03-03T21:59:34.159649Z
+35865
+luka
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+3c298f89-4303-0410-b956-a3cf2f4a3e73
+
+10-ar922x-led-fix
+file
+
+
+
+
+2013-03-17T12:12:43.000000Z
+0f3c4fcaf1256b01f316e784051ad7be
+2013-03-03T21:59:34.159649Z
+35865
+luka
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+1223
+
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/.svn/text-base/10-ar922x-led-fix.svn-base b/target/linux/ar71xx/base-files/etc/hotplug.d/net/.svn/text-base/10-ar922x-led-fix.svn-base
new file mode 100644
index 0000000..1024150
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/.svn/text-base/10-ar922x-led-fix.svn-base
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# For AR9220 and AR9223, GPIO JTAG must explicit be disabled
+# before LEDs start working. Do this when wifi device is
+# detected.
+
+#
+# $DEVPATH is not valid for some boards (including WZR-HP-AG300H).
+# Manipulate the $DEVPATH to reach the corresponding phyN.
+#
+
+devdir=`dirname $DEVPATH`
+devdir=`dirname $devdir`
+phydir=/sys$devdir/ieee80211
+phyname=`cat $phydir/phy*/name`
+
+if [ -z $phyname -o $ACTION != "add" ]; then exit 0; fi
+
+#
+# ar922x_disable_gpio_jtag():
+#
+# Emulate
+#       REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
+# for AR9220 and AR9223.
+#
+
+ar922x_disable_gpio_jtag()                 
+{                                          
+        local regidx=0x4054               
+        
+	[ -f /sys/kernel/debug/ieee80211/$1/ath9k/regidx ] && {
+		echo $regidx > /sys/kernel/debug/ieee80211/$1/ath9k/regidx
+        	regval=`cat /sys/kernel/debug/ieee80211/$1/ath9k/regval`
+        	regval=$((regval | 0x20000))
+        	echo regval $regval
+    		echo $regval > /sys/kernel/debug/ieee80211/$1/ath9k/regval
+        }
+}
+
+if [ $phyname -a $ACTION = "add" ]; then
+
+	. /lib/ar71xx.sh
+	
+	case $(ar71xx_board_name) in
+		wzr-hp-ag300h)
+			ar922x_disable_gpio_jtag $phyname
+			;;
+	esac;
+fi
+
+exit 0
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
new file mode 100644
index 0000000..1024150
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# For AR9220 and AR9223, GPIO JTAG must explicit be disabled
+# before LEDs start working. Do this when wifi device is
+# detected.
+
+#
+# $DEVPATH is not valid for some boards (including WZR-HP-AG300H).
+# Manipulate the $DEVPATH to reach the corresponding phyN.
+#
+
+devdir=`dirname $DEVPATH`
+devdir=`dirname $devdir`
+phydir=/sys$devdir/ieee80211
+phyname=`cat $phydir/phy*/name`
+
+if [ -z $phyname -o $ACTION != "add" ]; then exit 0; fi
+
+#
+# ar922x_disable_gpio_jtag():
+#
+# Emulate
+#       REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
+# for AR9220 and AR9223.
+#
+
+ar922x_disable_gpio_jtag()                 
+{                                          
+        local regidx=0x4054               
+        
+	[ -f /sys/kernel/debug/ieee80211/$1/ath9k/regidx ] && {
+		echo $regidx > /sys/kernel/debug/ieee80211/$1/ath9k/regidx
+        	regval=`cat /sys/kernel/debug/ieee80211/$1/ath9k/regval`
+        	regval=$((regval | 0x20000))
+        	echo regval $regval
+    		echo $regval > /sys/kernel/debug/ieee80211/$1/ath9k/regval
+        }
+}
+
+if [ $phyname -a $ACTION = "add" ]; then
+
+	. /lib/ar71xx.sh
+	
+	case $(ar71xx_board_name) in
+		wzr-hp-ag300h)
+			ar922x_disable_gpio_jtag $phyname
+			;;
+	esac;
+fi
+
+exit 0