aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)John Crispin2015-01-3010-4/+75
| | | | | | | | | | | The board is already supported by OpenWrt. WNR1000v2/WNR1000v2-VC are pretty much the same as WNR2000v3/WNR612v2, therefore the same initialization code and flash layout is used. Signed-off-by: Ștefan Rusu <saltwaterc@gmail.com> Tested-by: Douglas Fraser <1dsfraser@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44221 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC addressJohn Crispin2015-01-281-3/+5
| | | | | | | | | Fix the WLAN MAC address to match the one printed on the label by using the correct address from the ART instead of the address of the LAN interface. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44183 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default LED configuration for D-Link DIR-615 rev. C1John Crispin2015-01-281-0/+5
| | | | | | | | | This patch adds an entry in the uci-defaults' led-file to configure the WAN and WLAN LEDs by default. Signed-off-by: Vincent Wiemann <me@bibbl.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44165 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-LINK TL-WR843ND v1John Crispin2015-01-233-0/+16
| | | | | | | | | TP-LINK TL-WR843ND v1 is the same model like wr41, but with Power over Ethernet on wan port. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44085 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the UniFi AP Outdoor PlusJohn Crispin2015-01-226-3/+72
| | | | | | | | the GPIO controlling the rf filter is not configured properly by this patch. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44077 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TL-WA701ND v2John Crispin2015-01-209-1/+176
| | | | | | Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44063 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix board detection for TP-LINK TL-WA860REJohn Crispin2015-01-171-0/+3
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43983 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix disable_irq() on chained irq handlersFelix Fietkau2015-01-151-0/+93
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43974 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix console string in imagesFelix Fietkau2015-01-101-2/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43917 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: port wndr3700/3800 to the new image building codeFelix Fietkau2015-01-101-10/+76
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43910 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: port carambola2 to the new image building codeFelix Fietkau2015-01-101-2/+24
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43909 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add flush reset register writes, should fix restart issues (#17839)Felix Fietkau2014-12-261-0/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43777 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: rename/refresh patchFelix Fietkau2014-12-261-31/+31
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43775 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for qca956x socFelix Fietkau2014-12-182-0/+768
| | | | | | | | | | | | This patch adds soc support for QCA9561 and TP9343. TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China. The qca956x_wmac has not yet been supported by ath9k. tested on TL-WDR6500 and TL-WR882N v1 (Chinese version) Signed-off-by: Weijie Gao <hackpascal@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43744 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: Belkin AC 1750 DB (F9K1115v2) supportImre Kaloz2014-12-1710-0/+292
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43734 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add "preinit_regular" diag.sh set_state argumentJohn Crispin2014-12-151-0/+3
| | | | | | | | | | | | This new argument is used right after starting regular preinit (which happens if failsafe wasn't triggered). The main purpose of "preinit" argument is to indicate that failsafe can be triggered, however we were missing a way to inform user that we don't wait for a trigger anymore. With this change it's clear when failsafe mode can be triggered. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43715 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add an extra check on board_name for ath10k firmware patchsJohn Crispin2014-12-131-6/+14
| | | | | | | | | It moves firmware patch code behind an extra check on board_name. Otherwise it will calculate firmware checksum for unaffected boards. It also reduce boottime by a md5 calculation and removes error message on boot if firmware not found. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43679 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: improve ethernet driver cache footprint by removing an unnecessary ↵Felix Fietkau2014-12-093-27/+36
| | | | | | | | pointer Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43588 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove another leftover broken chunk of code in the unaligned access ↵Felix Fietkau2014-12-091-24/+0
| | | | | | | | hacks patch Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43586 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: refresh patchesFelix Fietkau2014-12-0835-65/+65
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43564 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix invalid pointer accesses caused by unaligned access hacks (#18455)Felix Fietkau2014-12-081-12/+12
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43560 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: dev-eth: replace mdelay callsJohn Crispin2014-12-071-2/+2
| | | | | | | | Similar to patch 2. Replace further mdelay calls. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43540 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: replace delay with sleep callsJohn Crispin2014-12-072-6/+6
| | | | | | | | | | | | I don't see that we're in an atomic context so there's no need to busy-wait. Therefore replace the delay with sleep calls. See also Documentation/timers/timers-howto.txt. It states: "In general, use of mdelay is discouraged and code should be refactored to allow for the use of msleep." Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43539 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ag71xx: replace fixed PHY reset wait time in ar7240sw_setupJohn Crispin2014-12-071-1/+28
| | | | | | | | | Replace the fixed wait time of 1s with polling for BMCR_RESET to be cleared on all PHYs. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43538 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add build profile for the gl-inet 6416A and 6408AJohn Crispin2014-12-011-1/+3
| | | | | | | | | | | | | Patch to add the buildprofile for the GL-Init-6408A-v1 and the GL-Inet-6416A-v1 Both devices are identical, only difference is one comes with 8MB flash and the other with 16MB flash Official website: http://www.gl-inet.com/w/?page_id=241&lang=en Comprehensive list of specs: https://revspace.nl/GL-Inet Signed-off-by: Martijn Zilverschoon <martijn@friedzombie.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43462 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: add D-link DGL-5500 A1 supportImre Kaloz2014-11-2710-0/+252
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43401 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: fix the r6100's wan led nameImre Kaloz2014-11-261-1/+1
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43393 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-LINK CPE210/220/510/520John Crispin2014-11-2610-7/+256
| | | | | | | | | | This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These devices are very similar to the Ubiquiti NanoStations, but with better specs: faster CPU, more RAM, 2x2 MIMO. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43385 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: Netgear R6100 supportImre Kaloz2014-11-2613-4/+232
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43382 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: merge changes from 3.10 that were forgotten for 3.14Felix Fietkau2014-11-2319-29/+153
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43347 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: remove linux 3.10 supportFelix Fietkau2014-11-23119-9491/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43344 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: switch to linux 3.14Felix Fietkau2014-11-231-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43343 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Added support for D-link DHP-1565 rev. A1John Crispin2014-11-1911-0/+234
| | | | | | Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43307 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix switch configuration in Ubiquiti UAP ProJohn Crispin2014-11-191-2/+3
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43306 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix the sys LEDs on the EasyLink M150 and miniJohn Crispin2014-11-143-3/+3
| | | | | | | | Sets the system LED on the EasyLink M150 and mini to lower-case "easylink" Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43271 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: adjust MR900 profile for the OpenMesh MR900v2 boardJohn Crispin2014-11-141-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43270 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add sysupgrade support for OpenMesh MR900v2John Crispin2014-11-142-0/+3
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43267 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for OpenMesh MR900v2John Crispin2014-11-144-2/+8
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43266 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the OpenMesh MR900v2John Crispin2014-11-143-0/+21
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43265 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: create profile and build image for the OpenMesh MR900 boardJohn Crispin2014-11-142-1/+13
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43264 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable sysupgrade for the OpenMesh MR900John Crispin2014-11-142-1/+8
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43261 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the OpenMesh MR900 boardJohn Crispin2014-11-144-0/+13
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43259 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add kernel support for the OpenMesh MR900 boardJohn Crispin2014-11-145-0/+238
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43258 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add missing WZR-450HP2 patch from r43026 for 3.10Felix Fietkau2014-11-031-0/+39
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43175 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for Netgear WNR2000v4John Crispin2014-11-039-0/+261
| | | | | | Signed-off-by: Michaël Burtin <mburtin@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43173 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: refresh 3.10 patchesFelix Fietkau2014-10-2414-83/+77
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43051 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: makefiles: make use of new var KERNEL_PATCHVERFelix Fietkau2014-10-241-1/+1
| | | | | | | | | | | replace all occurences of LINUX_VERSION with the cleaner approach. future kernel upgrades must mostly touch only one file. the only platform left is netlogic, because it uses a intermediate kernel 3.14.16 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43047 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for buffalo WZR-450HP2Felix Fietkau2014-10-229-1/+280
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43026 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: unify usage of IMAGE_PROFILE instead of PROFILE.John Crispin2014-10-201-1/+1
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42992 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add comments for Image/BuildLoader{, Alone}.John Crispin2014-10-201-0/+17
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42990 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 22:36:54 +0000