diff options
Diffstat (limited to 'target/linux/sunxi/patches-4.4/210-dt-sun8i-add-orangepi-2.patch')
| -rw-r--r-- | target/linux/sunxi/patches-4.4/210-dt-sun8i-add-orangepi-2.patch | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.4/210-dt-sun8i-add-orangepi-2.patch b/target/linux/sunxi/patches-4.4/210-dt-sun8i-add-orangepi-2.patch new file mode 100644 index 0000000000..5f40cec3d4 --- /dev/null +++ b/target/linux/sunxi/patches-4.4/210-dt-sun8i-add-orangepi-2.patch @@ -0,0 +1,302 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -662,6 +662,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a33-ippo-q8h-v1.2.dtb \ + sun8i-a33-q8-tablet.dtb \ + sun8i-a33-sinlinx-sina33.dtb \ ++ sun8i-h3-orangepi-2.dtb \ + sun8i-h3-orangepi-plus.dtb + dtb-$(CONFIG_MACH_SUN9I) += \ + sun9i-a80-optimus.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +@@ -0,0 +1,186 @@ ++/* ++ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "sun8i-h3.dtsi" ++#include "sunxi-common-regulators.dtsi" ++ ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++#include <dt-bindings/pinctrl/sun4i-a10.h> ++ ++/ { ++ model = "Xunlong Orange Pi 2"; ++ compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&leds_opc>, <&leds_r_opc>; ++ ++ status_led { ++ label = "orangepi:red:status"; ++ gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ pwr_led { ++ label = "orangepi:green:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ }; ++ ++ r_gpio_keys { ++ compatible = "gpio-keys"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sw_r_opc>; ++ ++ sw2 { ++ label = "sw2"; ++ linux,code = <BTN_1>; ++ gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; ++ }; ++ ++ sw4 { ++ label = "sw4"; ++ linux,code = <BTN_0>; ++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wifi_pwrseq_pin_orangepi>; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ ++ }; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&ir { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir_pins_a>; ++ status = "okay"; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ ++ cd-inverted; ++ status = "okay"; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins_a>; ++ vmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&pio { ++ leds_opc: led_pins@0 { ++ allwinner,pins = "PA15"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++}; ++ ++&r_pio { ++ leds_r_opc: led_pins@0 { ++ allwinner,pins = "PL10"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ sw_r_opc: key_pins@0 { ++ allwinner,pins = "PL3", "PL4"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ ++ wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { ++ allwinner,pins = "PL7"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++}; ++ ++®_usb1_vbus { ++ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&usb1_vbus_pin_a { ++ allwinner,pins = "PG13"; ++}; ++ ++&usbphy { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/sun8i-h3.dtsi ++++ b/arch/arm/boot/dts/sun8i-h3.dtsi +@@ -288,6 +288,33 @@ + clocks = <&osc24M>, <&pll6 1>, <&pll5>; + clock-output-names = "mbus"; + }; ++ ++ apb0: apb0_clk { ++ compatible = "fixed-factor-clock"; ++ #clock-cells = <0>; ++ clock-div = <1>; ++ clock-mult = <1>; ++ clocks = <&osc24M>; ++ clock-output-names = "apb0"; ++ }; ++ ++ apb0_gates: clk@01f01428 { ++ compatible = "allwinner,sun8i-h3-apb0-gates-clk", ++ "allwinner,sun4i-a10-gates-clk"; ++ reg = <0x01f01428 0x4>; ++ #clock-cells = <1>; ++ clocks = <&apb0>; ++ clock-indices = <0>, <1>; ++ clock-output-names = "apb0_pio", "apb0_ir"; ++ }; ++ ++ ir_clk: ir_clk@01f01454 { ++ compatible = "allwinner,sun4i-a10-mod0-clk"; ++ reg = <0x01f01454 0x4>; ++ #clock-cells = <0>; ++ clocks = <&osc32k>, <&osc24M>; ++ clock-output-names = "ir"; ++ }; + }; + + soc { +@@ -472,7 +499,7 @@ + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; +- #interrupt-cells = <2>; ++ #interrupt-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PA4", "PA5"; +@@ -503,6 +530,16 @@ + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; ++ ++ mmc2_8bit_pins: mmc2_8bit { ++ allwinner,pins = "PC5", "PC6", "PC8", ++ "PC9", "PC10", "PC11", ++ "PC12", "PC13", "PC14", ++ "PC15", "PC16"; ++ allwinner,function = "mmc2"; ++ allwinner,drive = <SUN4I_PINCTRL_30_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; + }; + + ahb_rst: reset@01c202c0 { +@@ -606,5 +643,40 @@ + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; ++ ++ apb0_reset: reset@01f014b0 { ++ reg = <0x01f014b0 0x4>; ++ compatible = "allwinner,sun6i-a31-clock-reset"; ++ #reset-cells = <1>; ++ }; ++ ++ ir: ir@01f02000 { ++ compatible = "allwinner,sun5i-a13-ir"; ++ clocks = <&apb0_gates 1>, <&ir_clk>; ++ clock-names = "apb", "ir"; ++ resets = <&apb0_reset 1>; ++ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ++ reg = <0x01f02000 0x40>; ++ status = "disabled"; ++ }; ++ ++ r_pio: pinctrl@01f02c00 { ++ compatible = "allwinner,sun8i-h3-r-pinctrl"; ++ reg = <0x01f02c00 0x400>; ++ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&apb0_gates 0>; ++ resets = <&apb0_reset 0>; ++ gpio-controller; ++ #gpio-cells = <3>; ++ interrupt-controller; ++ #interrupt-cells = <3>; ++ ++ ir_pins_a: ir@0 { ++ allwinner,pins = "PL11"; ++ allwinner,function = "s_cir_rx"; ++ allwinner,drive = <SUN4I_PINCTRL_10_MA>; ++ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; ++ }; ++ }; + }; + }; |