diff options
Diffstat (limited to 'target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h')
-rw-r--r-- | target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h | 258 |
1 files changed, 258 insertions, 0 deletions
diff --git a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h b/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h new file mode 100644 index 0000000000..e541c8ec3b --- /dev/null +++ b/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h @@ -0,0 +1,258 @@ +/* + * ifx_ssc.h defines some data sructures used in ifx_ssc.c + * + * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT) + * + * + */ + +#ifndef __IFX_SSC_H +#define __IFX_SSC_H +#ifdef __KERNEL__ +#include <asm/danube/ifx_ssc_defines.h> +#endif //__KERNEL__ + +#define PORT_CNT 1 // assume default value + +/* symbolic constants to be used in SSC routines */ + +// ### TO DO: bad performance +#define IFX_SSC_TXFIFO_ITL 1 +#define IFX_SSC_RXFIFO_ITL 1 + +struct ifx_ssc_statistics { + unsigned int abortErr; /* abort error */ + unsigned int modeErr; /* master/slave mode error */ + unsigned int txOvErr; /* TX Overflow error */ + unsigned int txUnErr; /* TX Underrun error */ + unsigned int rxOvErr; /* RX Overflow error */ + unsigned int rxUnErr; /* RX Underrun error */ + unsigned int rxBytes; + unsigned int txBytes; +}; + +struct ifx_ssc_hwopts { + unsigned int AbortErrDetect:1; /* Abort Error detection (in slave mode) */ + unsigned int rxOvErrDetect:1; /* Receive Overflow Error detection */ + unsigned int rxUndErrDetect:1; /* Receive Underflow Error detection */ + unsigned int txOvErrDetect:1; /* Transmit Overflow Error detection */ + unsigned int txUndErrDetect:1; /* Transmit Underflow Error detection */ + unsigned int echoMode:1; /* Echo mode */ + unsigned int loopBack:1; /* Loopback mode */ + unsigned int idleValue:1; /* Idle value */ + unsigned int clockPolarity:1; /* Idle clock is high or low */ + unsigned int clockPhase:1; /* Tx on trailing or leading edge */ + unsigned int headingControl:1; /* LSB first or MSB first */ + unsigned int dataWidth:6; /* from 2 up to 32 bits */ + unsigned int masterSelect:1; /* Master or Slave mode */ + unsigned int modeRxTx:2; /* rx/tx mode */ + unsigned int gpoCs:8; /* choose outputs to use for chip select */ + unsigned int gpoInv:8; /* invert GPO outputs */ +}; + +struct ifx_ssc_frm_opts { + bool FrameEnable; // SFCON.SFEN + unsigned int DataLength; // SFCON.DLEN + unsigned int PauseLength; // SFCON.PLEN + unsigned int IdleData; // SFCON.IDAT + unsigned int IdleClock; // SFCON.ICLK + bool StopAfterPause; // SFCON.STOP +}; + +struct ifx_ssc_frm_status { + bool DataBusy; // SFSTAT.DBSY + bool PauseBusy; // SFSTAT.PBSY + unsigned int DataCount; // SFSTAT.DCNT + unsigned int PauseCount; // SFSTAT.PCNT + bool EnIntAfterData; // SFCON.IBEN + bool EnIntAfterPause; // SFCON.IAEN +}; + +typedef struct { + char *buf; + size_t len; +} ifx_ssc_buf_item_t; + +// data structures for batch execution +typedef union { + struct { + bool save_options; + } init; + ifx_ssc_buf_item_t read; + ifx_ssc_buf_item_t write; + ifx_ssc_buf_item_t rd_wr; + unsigned int set_baudrate; + struct ifx_ssc_frm_opts set_frm; + unsigned int set_gpo; + struct ifx_ssc_hwopts set_hwopts; +} ifx_ssc_batch_cmd_param; + +struct ifx_ssc_batch_list { + unsigned int cmd; + ifx_ssc_batch_cmd_param cmd_param; + struct ifx_ssc_batch_list *next; +}; + +#ifdef __KERNEL__ +#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE) + +struct ifx_ssc_port { + unsigned long mapbase; + struct ifx_ssc_hwopts opts; + struct ifx_ssc_statistics stats; + struct ifx_ssc_frm_status frm_status; + struct ifx_ssc_frm_opts frm_opts; + /* wait queue for ifx_ssc_read() */ + wait_queue_head_t rwait, pwait; + int port_nr; + char port_is_open; /* exclusive open - boolean */ +// int no_of_bits; /* number of _valid_ bits */ +// int elem_size; /* shift for element (no of bytes)*/ + /* buffer and pointers to the read/write position */ + char *rxbuf; /* buffer for RX */ + char *rxbuf_end; /* buffer end pointer for RX */ + volatile char *rxbuf_ptr; /* buffer write pointer for RX */ + char *txbuf; /* buffer for TX */ + char *txbuf_end; /* buffer end pointer for TX */ + volatile char *txbuf_ptr; /* buffer read pointer for TX */ + unsigned int baud; + /* each channel has its own interrupts */ + /* (transmit/receive/error/frame) */ + unsigned int txirq, rxirq, errirq, frmirq; +}; +/* default values for SSC configuration */ +// values of CON +#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */ +#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */ +#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */ +#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */ +#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */ +#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */ +#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */ +#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */ +#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST +#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX +// other values +#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */ +#ifdef CONFIG_USE_EMULATOR +#define IFX_SSC_DEF_BAUDRATE 10000 +#else +#define IFX_SSC_DEF_BAUDRATE 2000000 +#endif +#define IFX_SSC_DEF_RMC 0x10 + +#define IFX_SSC_DEF_TXFIFO_FL 8 +#define IFX_SSC_DEF_RXFIFO_FL 1 + +#if 1 //TODO +#define IFX_SSC_DEF_GPO_CS 0x3 /* no chip select */ +#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */ +#else +#error "what is ur Chip Select???" +#endif +#define IFX_SSC_DEF_SFCON 0 /* no serial framing */ +#if 0 +#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ + IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT +#endif +#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ + IFX_SSC_R_BIT | IFX_SSC_E_BIT +#endif /* __KERNEL__ */ + +// batch execution commands +#define IFX_SSC_BATCH_CMD_INIT 1 +#define IFX_SSC_BATCH_CMD_READ 2 +#define IFX_SSC_BATCH_CMD_WRITE 3 +#define IFX_SSC_BATCH_CMD_RD_WR 4 +#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5 +#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6 +#define IFX_SSC_BATCH_CMD_SET_FRM 7 +#define IFX_SSC_BATCH_CMD_SET_GPO 8 +#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9 +//#define IFX_SSC_BATCH_CMD_ +//#define IFX_SSC_BATCH_CMD_ +#define IFX_SSC_BATCH_CMD_END_EXEC 0 + +/* Macros to configure SSC hardware */ +/* headingControl: */ +#define IFX_SSC_LSB_FIRST 0 +#define IFX_SSC_MSB_FIRST 1 +/* dataWidth: */ +#define IFX_SSC_MIN_DATA_WIDTH 2 +#define IFX_SSC_MAX_DATA_WIDTH 32 +/* master/slave mode select */ +#define IFX_SSC_MASTER_MODE 1 +#define IFX_SSC_SLAVE_MODE 0 +/* rx/tx mode */ +// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h +#define IFX_SSC_MODE_RXTX 0 +#define IFX_SSC_MODE_RX 1 +#define IFX_SSC_MODE_TX 2 +#define IFX_SSC_MODE_OFF 3 +#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX + +/* GPO values */ +#define IFX_SSC_MAX_GPO_OUT 7 + +#define IFX_SSC_RXREQ_BLOCK_SIZE 32768 + +/***********************/ +/* defines for ioctl's */ +/***********************/ +#define IFX_SSC_IOCTL_MAGIC 'S' +/* read out the statistics */ +#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics) +/* clear the statistics */ +#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2) +/* set the baudrate */ +#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int) +/* get the current baudrate */ +#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int) +/* set hardware options */ +#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts) +/* get the current hardware options */ +#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts) +/* set transmission mode */ +#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int) +/* get the current transmission mode */ +#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int) +/* abort transmission */ +#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9) +#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9) + +/* set general purpose outputs */ +#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int) +/* clear general purpose outputs */ +#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int) +/* get general purpose outputs */ +#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int) + +/*** serial framing ***/ +/* get status of serial framing */ +#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status) +/* get counter reload values and control bits */ +#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts) +/* set counter reload values and control bits */ +#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts) + +/*** batch execution ***/ +/* do batch execution */ +#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list) + +#ifdef __KERNEL__ +// routines from ifx_ssc.c +// ### TO DO +/* kernel interface for read and write */ +ssize_t ifx_ssc_kread (int, char *, size_t); +ssize_t ifx_ssc_kwrite (int, const char *, size_t); + +#ifdef CONFIG_IFX_VP_KERNEL_TEST +void ifx_ssc_tc (void); +#endif // CONFIG_IFX_VP_KERNEL_TEST + +#endif //__KERNEL__ +#endif // __IFX_SSC_H |