diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0205-Input-add-support-for-FocalTech-FT6236-touchscreen-c.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.1/0205-Input-add-support-for-FocalTech-FT6236-touchscreen-c.patch | 434 |
1 files changed, 0 insertions, 434 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0205-Input-add-support-for-FocalTech-FT6236-touchscreen-c.patch b/target/linux/brcm2708/patches-4.1/0205-Input-add-support-for-FocalTech-FT6236-touchscreen-c.patch deleted file mode 100644 index 3396f172ad..0000000000 --- a/target/linux/brcm2708/patches-4.1/0205-Input-add-support-for-FocalTech-FT6236-touchscreen-c.patch +++ /dev/null @@ -1,434 +0,0 @@ -From 75a6299867667a481a12f3c833322e39ff4fb089 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org> -Date: Fri, 2 Oct 2015 11:30:11 -0700 -Subject: [PATCH 205/222] Input: add support for FocalTech FT6236 touchscreen - controller -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This adds support for the FT6x06 and the FT6x36 family of capacitive touch -panel controllers, in particular the FT6236. - -Signed-off-by: Noralf Trønnes <noralf@tronnes.org> -Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> ---- - .../input/touchscreen/focaltech-ft6236.txt | 35 +++ - .../devicetree/bindings/vendor-prefixes.txt | 1 + - drivers/input/touchscreen/Kconfig | 13 + - drivers/input/touchscreen/Makefile | 1 + - drivers/input/touchscreen/ft6236.c | 327 +++++++++++++++++++++ - 5 files changed, 377 insertions(+) - create mode 100644 Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt - create mode 100644 drivers/input/touchscreen/ft6236.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt -@@ -0,0 +1,35 @@ -+* FocalTech FT6236 I2C touchscreen controller -+ -+Required properties: -+ - compatible : "focaltech,ft6236" -+ - reg : I2C slave address of the chip (0x38) -+ - interrupt-parent : a phandle pointing to the interrupt controller -+ serving the interrupt for this chip -+ - interrupts : interrupt specification for the touch controller -+ interrupt -+ - reset-gpios : GPIO specification for the RSTN input -+ - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) -+ - touchscreen-size-y : vertical resolution of touchscreen (in pixels) -+ -+Optional properties: -+ - touchscreen-fuzz-x : horizontal noise value of the absolute input -+ device (in pixels) -+ - touchscreen-fuzz-y : vertical noise value of the absolute input -+ device (in pixels) -+ - touchscreen-inverted-x : X axis is inverted (boolean) -+ - touchscreen-inverted-y : Y axis is inverted (boolean) -+ - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) -+ Swapping is done after inverting the axis -+ -+Example: -+ -+ ft6x06@38 { -+ compatible = "focaltech,ft6236"; -+ reg = <0x38>; -+ interrupt-parent = <&gpio>; -+ interrupts = <23 2>; -+ touchscreen-size-x = <320>; -+ touchscreen-size-y = <480>; -+ touchscreen-inverted-x; -+ touchscreen-swapped-x-y; -+ }; ---- a/Documentation/devicetree/bindings/vendor-prefixes.txt -+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt -@@ -76,6 +76,7 @@ everspin Everspin Technologies, Inc. - excito Excito - fcs Fairchild Semiconductor - firefly Firefly -+focaltech FocalTech Systems Co.,Ltd - fsl Freescale Semiconductor - GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. - gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. ---- a/drivers/input/touchscreen/Kconfig -+++ b/drivers/input/touchscreen/Kconfig -@@ -295,6 +295,19 @@ config TOUCHSCREEN_EGALAX - To compile this driver as a module, choose M here: the - module will be called egalax_ts. - -+config TOUCHSCREEN_FT6236 -+ tristate "FT6236 I2C touchscreen" -+ depends on I2C -+ depends on GPIOLIB || COMPILE_TEST -+ help -+ Say Y here to enable support for the I2C connected FT6x06 and -+ FT6x36 family of capacitive touchscreen drivers. -+ -+ If unsure, say N. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called ft6236. -+ - config TOUCHSCREEN_FUJITSU - tristate "Fujitsu serial touchscreen" - select SERIO ---- a/drivers/input/touchscreen/Makefile -+++ b/drivers/input/touchscreen/Makefile -@@ -36,6 +36,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ - obj-$(CONFIG_TOUCHSCREEN_ELAN) += elants_i2c.o - obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o - obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o -+obj-$(CONFIG_TOUCHSCREEN_FT6236) += ft6236.o - obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o - obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o - obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o ---- /dev/null -+++ b/drivers/input/touchscreen/ft6236.c -@@ -0,0 +1,327 @@ -+/* -+ * FocalTech FT6236 TouchScreen driver. -+ * -+ * Copyright (c) 2010 Focal tech Ltd. -+ * -+ * This software is licensed under the terms of the GNU General Public -+ * License version 2, as published by the Free Software Foundation, and -+ * may be copied, distributed, and modified under those terms. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/delay.h> -+#include <linux/gpio/consumer.h> -+#include <linux/i2c.h> -+#include <linux/input.h> -+#include <linux/input/mt.h> -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/property.h> -+ -+#define FT6236_MAX_TOUCH_POINTS 2 -+ -+#define FT6236_REG_TH_GROUP 0x80 -+#define FT6236_REG_PERIODACTIVE 0x88 -+#define FT6236_REG_LIB_VER_H 0xa1 -+#define FT6236_REG_LIB_VER_L 0xa2 -+#define FT6236_REG_CIPHER 0xa3 -+#define FT6236_REG_FIRMID 0xa6 -+#define FT6236_REG_FOCALTECH_ID 0xa8 -+#define FT6236_REG_RELEASE_CODE_ID 0xaf -+ -+#define FT6236_EVENT_PRESS_DOWN 0 -+#define FT6236_EVENT_LIFT_UP 1 -+#define FT6236_EVENT_CONTACT 2 -+#define FT6236_EVENT_NO_EVENT 3 -+ -+struct ft6236_data { -+ struct i2c_client *client; -+ struct input_dev *input; -+ struct gpio_desc *reset_gpio; -+ u32 max_x; -+ u32 max_y; -+ bool invert_x; -+ bool invert_y; -+ bool swap_xy; -+}; -+ -+/* -+ * This struct is a touchpoint as stored in hardware. Note that the id, -+ * as well as the event, are stored in the upper nybble of the hi byte. -+ */ -+struct ft6236_touchpoint { -+ union { -+ u8 xhi; -+ u8 event; -+ }; -+ u8 xlo; -+ union { -+ u8 yhi; -+ u8 id; -+ }; -+ u8 ylo; -+ u8 weight; -+ u8 misc; -+} __packed; -+ -+/* This packet represents the register map as read from offset 0 */ -+struct ft6236_packet { -+ u8 dev_mode; -+ u8 gest_id; -+ u8 touches; -+ struct ft6236_touchpoint points[FT6236_MAX_TOUCH_POINTS]; -+} __packed; -+ -+static int ft6236_read(struct i2c_client *client, u8 reg, u8 len, void *data) -+{ -+ int error; -+ -+ error = i2c_smbus_read_i2c_block_data(client, reg, len, data); -+ if (error < 0) -+ return error; -+ -+ if (error != len) -+ return -EIO; -+ -+ return 0; -+} -+ -+static irqreturn_t ft6236_interrupt(int irq, void *dev_id) -+{ -+ struct ft6236_data *ft6236 = dev_id; -+ struct device *dev = &ft6236->client->dev; -+ struct input_dev *input = ft6236->input; -+ struct ft6236_packet buf; -+ u8 touches; -+ int i, error; -+ -+ error = ft6236_read(ft6236->client, 0, sizeof(buf), &buf); -+ if (error) { -+ dev_err(dev, "read touchdata failed %d\n", error); -+ return IRQ_HANDLED; -+ } -+ -+ touches = buf.touches & 0xf; -+ if (touches > FT6236_MAX_TOUCH_POINTS) { -+ dev_dbg(dev, -+ "%d touch points reported, only %d are supported\n", -+ touches, FT6236_MAX_TOUCH_POINTS); -+ touches = FT6236_MAX_TOUCH_POINTS; -+ } -+ -+ for (i = 0; i < touches; i++) { -+ struct ft6236_touchpoint *point = &buf.points[i]; -+ u16 x = ((point->xhi & 0xf) << 8) | buf.points[i].xlo; -+ u16 y = ((point->yhi & 0xf) << 8) | buf.points[i].ylo; -+ u8 event = point->event >> 6; -+ u8 id = point->id >> 4; -+ bool act = (event == FT6236_EVENT_PRESS_DOWN || -+ event == FT6236_EVENT_CONTACT); -+ -+ input_mt_slot(input, id); -+ input_mt_report_slot_state(input, MT_TOOL_FINGER, act); -+ if (!act) -+ continue; -+ -+ if (ft6236->invert_x) -+ x = ft6236->max_x - x; -+ -+ if (ft6236->invert_y) -+ y = ft6236->max_y - y; -+ -+ if (ft6236->swap_xy) { -+ input_report_abs(input, ABS_MT_POSITION_X, y); -+ input_report_abs(input, ABS_MT_POSITION_Y, x); -+ } else { -+ input_report_abs(input, ABS_MT_POSITION_X, x); -+ input_report_abs(input, ABS_MT_POSITION_Y, y); -+ } -+ } -+ -+ input_mt_sync_frame(input); -+ input_sync(input); -+ -+ return IRQ_HANDLED; -+} -+ -+static u8 ft6236_debug_read_byte(struct ft6236_data *ft6236, u8 reg) -+{ -+ struct i2c_client *client = ft6236->client; -+ u8 val = 0; -+ int error; -+ -+ error = ft6236_read(client, reg, 1, &val); -+ if (error) -+ dev_dbg(&client->dev, -+ "error reading register 0x%02x: %d\n", reg, error); -+ -+ return val; -+} -+ -+static void ft6236_debug_info(struct ft6236_data *ft6236) -+{ -+ struct device *dev = &ft6236->client->dev; -+ -+ dev_dbg(dev, "Touch threshold is %d\n", -+ ft6236_debug_read_byte(ft6236, FT6236_REG_TH_GROUP) * 4); -+ dev_dbg(dev, "Report rate is %dHz\n", -+ ft6236_debug_read_byte(ft6236, FT6236_REG_PERIODACTIVE) * 10); -+ dev_dbg(dev, "Firmware library version 0x%02x%02x\n", -+ ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_H), -+ ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_L)); -+ dev_dbg(dev, "Firmware version 0x%02x\n", -+ ft6236_debug_read_byte(ft6236, FT6236_REG_FIRMID)); -+ dev_dbg(dev, "Chip vendor ID 0x%02x\n", -+ ft6236_debug_read_byte(ft6236, FT6236_REG_CIPHER)); -+ dev_dbg(dev, "CTPM vendor ID 0x%02x\n", -+ ft6236_debug_read_byte(ft6236, FT6236_REG_FOCALTECH_ID)); -+ dev_dbg(dev, "Release code version 0x%02x\n", -+ ft6236_debug_read_byte(ft6236, FT6236_REG_RELEASE_CODE_ID)); -+} -+ -+static void ft6236_reset(struct ft6236_data *ft6236) -+{ -+ if (!ft6236->reset_gpio) -+ return; -+ -+ gpiod_set_value_cansleep(ft6236->reset_gpio, 1); -+ usleep_range(5000, 20000); -+ gpiod_set_value_cansleep(ft6236->reset_gpio, 0); -+ msleep(300); -+} -+ -+static int ft6236_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct device *dev = &client->dev; -+ struct ft6236_data *ft6236; -+ struct input_dev *input; -+ u32 fuzz_x = 0, fuzz_y = 0; -+ u8 val; -+ int error; -+ -+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) -+ return -ENXIO; -+ -+ if (!client->irq) { -+ dev_err(dev, "irq is missing\n"); -+ return -EINVAL; -+ } -+ -+ ft6236 = devm_kzalloc(dev, sizeof(*ft6236), GFP_KERNEL); -+ if (!ft6236) -+ return -ENOMEM; -+ -+ ft6236->client = client; -+ ft6236->reset_gpio = devm_gpiod_get_optional(dev, "reset", -+ GPIOD_OUT_LOW); -+ if (IS_ERR(ft6236->reset_gpio)) { -+ error = PTR_ERR(ft6236->reset_gpio); -+ if (error != -EPROBE_DEFER) -+ dev_err(dev, "error getting reset gpio: %d\n", error); -+ return error; -+ } -+ -+ ft6236_reset(ft6236); -+ -+ /* verify that the controller is present */ -+ error = ft6236_read(client, 0x00, 1, &val); -+ if (error) { -+ dev_err(dev, "failed to read from controller: %d\n", error); -+ return error; -+ } -+ -+ ft6236_debug_info(ft6236); -+ -+ input = devm_input_allocate_device(dev); -+ if (!input) -+ return -ENOMEM; -+ -+ ft6236->input = input; -+ input->name = client->name; -+ input->id.bustype = BUS_I2C; -+ -+ if (device_property_read_u32(dev, "touchscreen-size-x", -+ &ft6236->max_x) || -+ device_property_read_u32(dev, "touchscreen-size-y", -+ &ft6236->max_y)) { -+ dev_err(dev, "touchscreen-size-x and/or -y missing\n"); -+ return -EINVAL; -+ } -+ -+ device_property_read_u32(dev, "touchscreen-fuzz-x", &fuzz_x); -+ device_property_read_u32(dev, "touchscreen-fuzz-y", &fuzz_y); -+ ft6236->invert_x = device_property_read_bool(dev, -+ "touchscreen-inverted-x"); -+ ft6236->invert_y = device_property_read_bool(dev, -+ "touchscreen-inverted-y"); -+ ft6236->swap_xy = device_property_read_bool(dev, -+ "touchscreen-swapped-x-y"); -+ -+ if (ft6236->swap_xy) { -+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, -+ ft6236->max_y, fuzz_y, 0); -+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, -+ ft6236->max_x, fuzz_x, 0); -+ } else { -+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, -+ ft6236->max_x, fuzz_x, 0); -+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, -+ ft6236->max_y, fuzz_y, 0); -+ } -+ -+ error = input_mt_init_slots(input, FT6236_MAX_TOUCH_POINTS, -+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); -+ if (error) -+ return error; -+ -+ error = devm_request_threaded_irq(dev, client->irq, NULL, -+ ft6236_interrupt, IRQF_ONESHOT, -+ client->name, ft6236); -+ if (error) { -+ dev_err(dev, "request irq %d failed: %d\n", client->irq, error); -+ return error; -+ } -+ -+ error = input_register_device(input); -+ if (error) { -+ dev_err(dev, "failed to register input device: %d\n", error); -+ return error; -+ } -+ -+ return 0; -+} -+ -+#ifdef CONFIG_OF -+static const struct of_device_id ft6236_of_match[] = { -+ { .compatible = "focaltech,ft6236", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, ft6236_of_match); -+#endif -+ -+static const struct i2c_device_id ft6236_id[] = { -+ { "ft6236", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, ft6236_id); -+ -+static struct i2c_driver ft6236_driver = { -+ .driver = { -+ .name = "ft6236", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(ft6236_of_match), -+ }, -+ .probe = ft6236_probe, -+ .id_table = ft6236_id, -+}; -+module_i2c_driver(ft6236_driver); -+ -+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>"); -+MODULE_AUTHOR("Noralf Trønnes <noralf@tronnes.org>"); -+MODULE_DESCRIPTION("FocalTech FT6236 TouchScreen driver"); -+MODULE_LICENSE("GPL"); |