aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/patches-2.6.39
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx/patches-2.6.39')
-rw-r--r--target/linux/ar71xx/patches-2.6.39/001-ar71xx_core.patch50
-rw-r--r--target/linux/ar71xx/patches-2.6.39/002-ar71xx_pci.patch10
-rw-r--r--target/linux/ar71xx/patches-2.6.39/003-ar71xx_usb_host.patch58
-rw-r--r--target/linux/ar71xx/patches-2.6.39/004-ar71xx_spi_controller.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.39/005-ar71xx_mac_driver.patch21
-rw-r--r--target/linux/ar71xx/patches-2.6.39/006-ar71xx_wdt_driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.39/007-ar91xx_flash_driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.39/101-ksz8041_phy_driver.patch24
-rw-r--r--target/linux/ar71xx/patches-2.6.39/102-mtd_m25p80_add_myloader_parser.patch19
-rw-r--r--target/linux/ar71xx/patches-2.6.39/104-mtd_m25p80_add_redboot_parser.patch18
-rw-r--r--target/linux/ar71xx/patches-2.6.39/107-mtd-SST39VF6401B-support.patch29
-rw-r--r--target/linux/ar71xx/patches-2.6.39/108-mtd_fix_cfi_cmdset_0002_status_check.patch69
-rw-r--r--target/linux/ar71xx/patches-2.6.39/109-mtd-wrt160nl-trx-parser.patch44
-rw-r--r--target/linux/ar71xx/patches-2.6.39/110-usb-ehci-add-war-for-synopsys-hc-bug.patch22
-rw-r--r--target/linux/ar71xx/patches-2.6.39/111-mtd-cfi_cmdset_0002-force-word-write.patch61
-rw-r--r--target/linux/ar71xx/patches-2.6.39/120-dsa-trailer-tag-validation-fix.patch11
-rw-r--r--target/linux/ar71xx/patches-2.6.39/121-dsa-add-88e6063-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.39/140-redboot_partition_scan.patch54
-rw-r--r--target/linux/ar71xx/patches-2.6.39/150-drivers-link-spi-before-mtd.patch12
-rw-r--r--target/linux/ar71xx/patches-2.6.39/151-spi-add-various-flags.patch19
-rw-r--r--target/linux/ar71xx/patches-2.6.39/152-rb4xx-spi-driver.patch25
-rw-r--r--target/linux/ar71xx/patches-2.6.39/153-spi-rb4xx-cpld-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.39/200-rb4xx_nand_driver.patch21
-rw-r--r--target/linux/ar71xx/patches-2.6.39/201-ap83_spi_controller.patch27
-rw-r--r--target/linux/ar71xx/patches-2.6.39/202-spi_vsc7385_driver.patch24
-rw-r--r--target/linux/ar71xx/patches-2.6.39/203-pb44_spi_controller.patch27
-rw-r--r--target/linux/ar71xx/patches-2.6.39/205-wndr3700-usb-led-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.39/206-nxp-74hc153-gpio-chip-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-2.6.39/207-rb750-led-driver.patch23
-rw-r--r--target/linux/ar71xx/patches-2.6.39/208-rb750-nand-driver.patch21
-rw-r--r--target/linux/ar71xx/patches-2.6.39/300-mips_fw_myloader.patch22
-rw-r--r--target/linux/ar71xx/patches-2.6.39/400-2.6.35-fix-nand_scan_ident-options.patch22
-rw-r--r--target/linux/ar71xx/patches-2.6.39/500-ar933x-uart-driver.patch50
-rw-r--r--target/linux/ar71xx/patches-2.6.39/901-get_c0_compare_irq_function.patch29
-rw-r--r--target/linux/ar71xx/patches-2.6.39/950-convert-to-new-irq-functions.patch259
35 files changed, 1253 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-2.6.39/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.39/001-ar71xx_core.patch
new file mode 100644
index 0000000000..c8ccfedfcb
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/001-ar71xx_core.patch
@@ -0,0 +1,50 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -158,6 +158,13 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -W
+ endif
+ cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
+
++#
++# Atheros AR71xx
++#
++core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
++cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
++load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
++
+ cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
+ cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
+ cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -84,6 +84,23 @@ config ATH79
+ help
+ Support for the Atheros AR71XX/AR724X/AR913X SoCs.
+
++config ATHEROS_AR71XX
++ bool "Atheros AR71xx based boards"
++ select CEVT_R4K
++ select CSRC_R4K
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++ select IRQ_CPU
++ select ARCH_REQUIRE_GPIOLIB
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_CPU_MIPS32_R2
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_HAS_EARLY_PRINTK
++ select MIPS_MACHINE
++ help
++ Support for Atheros AR71xx based boards.
++
+ config BCM47XX
+ bool "Broadcom BCM47XX based boards"
+ select CEVT_R4K
+@@ -739,6 +756,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+ endchoice
+
+ source "arch/mips/alchemy/Kconfig"
++source "arch/mips/ar71xx/Kconfig"
+ source "arch/mips/ath79/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
diff --git a/target/linux/ar71xx/patches-2.6.39/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.39/002-ar71xx_pci.patch
new file mode 100644
index 0000000000..3facce9d70
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/002-ar71xx_pci.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
+ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
+ ops-bcm63xx.o
++obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
diff --git a/target/linux/ar71xx/patches-2.6.39/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.39/003-ar71xx_usb_host.patch
new file mode 100644
index 0000000000..dd79451a67
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/003-ar71xx_usb_host.patch
@@ -0,0 +1,58 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -129,6 +129,13 @@ config XPS_USB_HCD_XILINX
+ config USB_FSL_MPH_DR_OF
+ tristate
+
++config USB_EHCI_AR71XX
++ bool "USB EHCI support for AR71xx"
++ depends on USB_EHCI_HCD && ATHEROS_AR71XX
++ default y
++ help
++ Support for Atheros AR71xx built-in EHCI controller
++
+ config USB_EHCI_FSL
+ bool "Support for Freescale on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && FSL_SOC
+@@ -287,6 +294,13 @@ config USB_OHCI_HCD_OMAP3
+ Enables support for the on-chip OHCI controller on
+ OMAP3 and later chips.
+
++config USB_OHCI_AR71XX
++ bool "USB OHCI support for Atheros AR71xx"
++ depends on USB_OHCI_HCD && ATHEROS_AR71XX
++ default y
++ help
++ Support for Atheros AR71xx built-in OHCI controller
++
+ config USB_OHCI_HCD_PPC_SOC
+ bool "OHCI support for on-chip PPC USB controller"
+ depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1267,6 +1267,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER tegra_ehci_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_AR71XX
++#include "ehci-ar71xx.c"
++#define PLATFORM_DRIVER ehci_ar71xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1107,6 +1107,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
+ #endif
+
++#ifdef CONFIG_USB_OHCI_AR71XX
++#include "ohci-ar71xx.c"
++#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OMAP1_PLATFORM_DRIVER) && \
diff --git a/target/linux/ar71xx/patches-2.6.39/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.39/004-ar71xx_spi_controller.patch
new file mode 100644
index 0000000000..d788016cc2
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/004-ar71xx_spi_controller.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -67,6 +67,13 @@ config SPI_ATH79
+ This enables support for the SPI controller present on the
+ Atheros AR71XX/AR724X/AR913X SoCs.
+
++config SPI_AR71XX
++ tristate "Atheros AR71xx SPI Controller"
++ depends on SPI_MASTER && ATHEROS_AR71XX
++ select SPI_BITBANG
++ help
++ This is the SPI contoller driver for Atheros AR71xx.
++
+ config SPI_ATMEL
+ tristate "Atmel SPI Controller"
+ depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SPI_MASTER) += spi.o
+
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_ALTERA) += spi_altera.o
++obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
+ obj-$(CONFIG_SPI_ATH79) += ath79_spi.o
+ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
diff --git a/target/linux/ar71xx/patches-2.6.39/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.39/005-ar71xx_mac_driver.patch
new file mode 100644
index 0000000000..e1a8dff169
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/005-ar71xx_mac_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2071,6 +2071,8 @@ config ACENIC_OMIT_TIGON_I
+
+ The safe and default value for this is N.
+
++source drivers/net/ag71xx/Kconfig
++
+ config DL2K
+ tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ depends on PCI
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -112,6 +112,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
+ # end link order section
+ #
+
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_SUNDANCE) += sundance.o
+ obj-$(CONFIG_HAMACHI) += hamachi.o
+ obj-$(CONFIG_NET) += Space.o loopback.o
diff --git a/target/linux/ar71xx/patches-2.6.39/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.39/006-ar71xx_wdt_driver.patch
new file mode 100644
index 0000000000..9a0d07d4e6
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/006-ar71xx_wdt_driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -990,6 +990,13 @@ config BCM63XX_WDT
+ To compile this driver as a loadable module, choose M here.
+ The module will be called bcm63xx_wdt.
+
++config AR71XX_WDT
++ tristate "Atheros AR71xx Watchdog Timer"
++ depends on ATHEROS_AR71XX
++ help
++ Hardware driver for the built-in watchdog timer on the Atheros
++ AR71xx SoCs.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -119,6 +119,7 @@ obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
+ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
++obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
diff --git a/target/linux/ar71xx/patches-2.6.39/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.39/007-ar91xx_flash_driver.patch
new file mode 100644
index 0000000000..b3e0dc4081
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/007-ar91xx_flash_driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -260,6 +260,13 @@ config MTD_BCM963XX
+ Support for parsing CFE image tag and creating MTD partitions on
+ Broadcom BCM63xx boards.
+
++config MTD_AR91XX_FLASH
++ tristate "Atheros AR91xx parallel flash support"
++ depends on ATHEROS_AR71XX
++ select MTD_COMPLEX_MAPPINGS
++ help
++ Parallel flash driver for the Atheros AR91xx based boards.
++
+ config MTD_DILNETPC
+ tristate "CFI Flash device mapped on DIL/Net PC"
+ depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
+ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI) += pci.o
++obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o
+ obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312) += edb7312.o
+ obj-$(CONFIG_MTD_IMPA7) += impa7.o
diff --git a/target/linux/ar71xx/patches-2.6.39/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.39/101-ksz8041_phy_driver.patch
new file mode 100644
index 0000000000..cca0922721
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/101-ksz8041_phy_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -119,6 +119,11 @@ config RTL8306_PHY
+ tristate "Driver for Realtek RTL8306S switches"
+ select SWCONFIG
+
++config MICREL_PHY
++ tristate "Drivers for Micrel/Kendin PHYs"
++ ---help---
++ Currently has a driver for the KSZ8041
++
+ config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi
+ obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
++obj-$(CONFIG_MICREL_PHY) += micrel.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
diff --git a/target/linux/ar71xx/patches-2.6.39/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.39/102-mtd_m25p80_add_myloader_parser.patch
new file mode 100644
index 0000000000..149474bcc1
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/102-mtd_m25p80_add_myloader_parser.patch
@@ -0,0 +1,19 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -968,6 +968,16 @@ static int __devinit m25p_probe(struct s
+ part_probes, &parts, 0);
+ }
+
++#ifdef CONFIG_MTD_MYLOADER_PARTS
++ if (nr_parts <= 0) {
++ static const char *part_probes[]
++ = { "MyLoader", NULL, };
++
++ nr_parts = parse_mtd_partitions(&flash->mtd,
++ part_probes, &parts, 0);
++ }
++#endif
++
+ if (nr_parts <= 0 && data && data->parts) {
+ parts = data->parts;
+ nr_parts = data->nr_parts;
diff --git a/target/linux/ar71xx/patches-2.6.39/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.39/104-mtd_m25p80_add_redboot_parser.patch
new file mode 100644
index 0000000000..dee3f6cc7d
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/104-mtd_m25p80_add_redboot_parser.patch
@@ -0,0 +1,18 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -978,6 +978,15 @@ static int __devinit m25p_probe(struct s
+ }
+ #endif
+
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++ if (nr_parts <= 0) {
++ static const char *part_probes[]
++ = { "RedBoot", NULL, };
++
++ nr_parts = parse_mtd_partitions(&flash->mtd,
++ part_probes, &parts, 0);
++ }
++#endif
+ if (nr_parts <= 0 && data && data->parts) {
+ parts = data->parts;
+ nr_parts = data->nr_parts;
diff --git a/target/linux/ar71xx/patches-2.6.39/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.39/107-mtd-SST39VF6401B-support.patch
new file mode 100644
index 0000000000..246abd5dc0
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/107-mtd-SST39VF6401B-support.patch
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160 0x2782
+ #define SST39VF1601 0x234b
+ #define SST39VF3201 0x235b
++#define SST39VF6401B 0x236d
+ #define SST39WF1601 0x274b
+ #define SST39WF1602 0x274a
+ #define SST39LF512 0x00D4
+@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
+ ERASEINFO(0x10000,64),
+ }
+ }, {
++ .mfr_id = CFI_MFR_SST,
++ .dev_id = SST39VF6401B,
++ .name = "SST 39VF6401B",
++ .devtypes = CFI_DEVICETYPE_X16,
++ .uaddr = MTD_UADDR_0xAAAA_0x5555,
++ .dev_size = SIZE_8MiB,
++ .cmd_set = P_ID_AMD_STD,
++ .nr_regions = 1,
++ .regions = {
++ ERASEINFO(0x10000,128)
++ }
++ }, {
+ .mfr_id = CFI_MFR_ST,
+ .dev_id = M29F800AB,
+ .name = "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-2.6.39/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.39/108-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644
index 0000000000..226f3b0914
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/108-mtd_fix_cfi_cmdset_0002_status_check.patch
@@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1219,8 +1219,8 @@ static int __xipram do_write_oneword(str
+ break;
+ }
+
+- if (chip_ready(map, adr))
+- break;
++ if (chip_good(map, adr, datum))
++ goto enable_xip;
+
+ /* Latency issues. Drop the lock, wait a while and retry */
+ UDELAY(map, chip, adr, 1);
+@@ -1236,6 +1236,8 @@ static int __xipram do_write_oneword(str
+
+ ret = -EIO;
+ }
++
++ enable_xip:
+ xip_enable(map, chip, adr);
+ op_done:
+ chip->state = FL_READY;
+@@ -1567,7 +1569,6 @@ static int cfi_amdstd_write_buffers(stru
+ return 0;
+ }
+
+-
+ /*
+ * Handle devices with one erase region, that only implement
+ * the chip erase command.
+@@ -1631,8 +1632,8 @@ static int __xipram do_erase_chip(struct
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr))
+- break;
++ if (chip_good(map, adr, map_word_ff(map)))
++ goto op_done;
+
+ if (time_after(jiffies, timeo)) {
+ printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -1652,6 +1653,7 @@ static int __xipram do_erase_chip(struct
+ ret = -EIO;
+ }
+
++ op_done:
+ chip->state = FL_READY;
+ xip_enable(map, chip, adr);
+ put_chip(map, chip, adr);
+@@ -1719,9 +1721,9 @@ static int __xipram do_erase_oneblock(st
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr)) {
++ if (chip_good(map, adr, map_word_ff(map))) {
+ xip_enable(map, chip, adr);
+- break;
++ goto op_done;
+ }
+
+ if (time_after(jiffies, timeo)) {
+@@ -1743,6 +1745,7 @@ static int __xipram do_erase_oneblock(st
+ ret = -EIO;
+ }
+
++ op_done:
+ chip->state = FL_READY;
+ put_chip(map, chip, adr);
+ mutex_unlock(&chip->mutex);
diff --git a/target/linux/ar71xx/patches-2.6.39/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.39/109-mtd-wrt160nl-trx-parser.patch
new file mode 100644
index 0000000000..ea9460ae31
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/109-mtd-wrt160nl-trx-parser.patch
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -987,6 +987,16 @@ static int __devinit m25p_probe(struct s
+ part_probes, &parts, 0);
+ }
+ #endif
++
++#ifdef CONFIG_MTD_WRT160NL_PARTS
++ if (nr_parts <= 0) {
++ static const char *part_probes[]
++ = { "wrt160nl", NULL, };
++
++ nr_parts = parse_mtd_partitions(&flash->mtd,
++ part_probes, &parts, 0);
++ }
++#endif
+ if (nr_parts <= 0 && data && data->parts) {
+ parts = data->parts;
+ nr_parts = data->nr_parts;
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -176,6 +176,12 @@ config MTD_AR7_PARTS
+
+ endif # MTD_PARTITIONS
+
++config MTD_WRT160NL_PARTS
++ tristate "Linksys WRT160NL partitioning support"
++ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
++ ---help---
++ Linksys WRT160NL partitioning support
++
+ config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+
+ # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ar71xx/patches-2.6.39/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.39/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
new file mode 100644
index 0000000000..fb7edde054
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
@@ -0,0 +1,22 @@
+--- a/drivers/usb/host/ehci-q.c
++++ b/drivers/usb/host/ehci-q.c
+@@ -1183,6 +1183,9 @@ static void end_unlink_async (struct ehc
+ ehci->reclaim = NULL;
+ start_unlink_async (ehci, next);
+ }
++
++ if (ehci->has_synopsys_hc_bug)
++ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
+ }
+
+ /* makes sure the async qh will become idle */
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -134,6 +134,7 @@ struct ehci_hcd { /* one per controlle
+ unsigned amd_pll_fix:1;
+ unsigned fs_i_thresh:1; /* Intel iso scheduling */
+ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
++ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
+
+ /* required for usb32 quirk */
+ #define OHCI_CTRL_HCFS (3 << 6)
diff --git a/target/linux/ar71xx/patches-2.6.39/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.39/111-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644
index 0000000000..ad9a837e8b
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/111-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+
+ #define MAX_WORD_RETRIES 3
+
+@@ -50,7 +50,9 @@
+
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ struct map_info *map = mtd->priv;
+@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
+ mtd->write = cfi_amdstd_write_buffers;
+ }
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1379,6 +1383,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+ * FIXME: interleaved mode not tested, and probably not supported!
+ */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ unsigned long adr, const u_char *buf,
+ int len)
+@@ -1489,7 +1494,6 @@ static int __xipram do_write_buffer(stru
+ return ret;
+ }
+
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+ {
+@@ -1568,6 +1572,7 @@ static int cfi_amdstd_write_buffers(stru
+
+ return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /*
+ * Handle devices with one erase region, that only implement
diff --git a/target/linux/ar71xx/patches-2.6.39/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.39/120-dsa-trailer-tag-validation-fix.patch
new file mode 100644
index 0000000000..3e3902bac0
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/120-dsa-trailer-tag-validation-fix.patch
@@ -0,0 +1,11 @@
+--- a/net/dsa/tag_trailer.c
++++ b/net/dsa/tag_trailer.c
+@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
+
+ trailer = skb_tail_pointer(skb) - 4;
+ if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+ goto out_drop;
+
+ source_port = trailer[1] & 7;
diff --git a/target/linux/ar71xx/patches-2.6.39/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.39/121-dsa-add-88e6063-driver.patch
new file mode 100644
index 0000000000..1a11a69c6f
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/121-dsa-add-88e6063-driver.patch
@@ -0,0 +1,26 @@
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
+ This enables support for the Marvell 88E6060 ethernet switch
+ chip.
+
++config NET_DSA_MV88E6063
++ bool "Marvell 88E6063 ethernet switch chip support"
++ select NET_DSA_TAG_TRAILER
++ ---help---
++ This enables support for the Marvell 88E6063 ethernet switch
++ chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+ bool
+ default n
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
+ # switch drivers
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
+ obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
+
diff --git a/target/linux/ar71xx/patches-2.6.39/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.39/140-redboot_partition_scan.patch
new file mode 100644
index 0000000000..a09271a069
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/140-redboot_partition_scan.patch
@@ -0,0 +1,54 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -78,31 +78,32 @@ static int parse_redboot_partitions(stru
+ static char nullstring[] = "unallocated";
+ #endif
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+- while (master->block_isbad &&
++ while (master->block_isbad &&
+ master->block_isbad(master, offset)) {
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+ }
+ } else {
+ offset = directory * master->erasesize;
+- while (master->block_isbad &&
++ while (master->block_isbad &&
+ master->block_isbad(master, offset)) {
+ offset += master->erasesize;
+ if (offset == master->size)
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+-
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+
+@@ -174,6 +175,11 @@ static int parse_redboot_partitions(stru
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block :) */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
diff --git a/target/linux/ar71xx/patches-2.6.39/150-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-2.6.39/150-drivers-link-spi-before-mtd.patch
new file mode 100644
index 0000000000..f72f8ad07f
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/150-drivers-link-spi-before-mtd.patch
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -46,8 +46,8 @@ obj-$(CONFIG_IDE) += ide/
+ obj-$(CONFIG_SCSI) += scsi/
+ obj-$(CONFIG_ATA) += ata/
+ obj-$(CONFIG_TARGET_CORE) += target/
+-obj-$(CONFIG_MTD) += mtd/
+ obj-$(CONFIG_SPI) += spi/
++obj-$(CONFIG_MTD) += mtd/
+ obj-y += net/
+ obj-$(CONFIG_ATM) += atm/
+ obj-$(CONFIG_FUSION) += message/
diff --git a/target/linux/ar71xx/patches-2.6.39/151-spi-add-various-flags.patch b/target/linux/ar71xx/patches-2.6.39/151-spi-add-various-flags.patch
new file mode 100644
index 0000000000..b51f68f3ca
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/151-spi-add-various-flags.patch
@@ -0,0 +1,19 @@
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -441,6 +441,8 @@ struct spi_transfer {
+ dma_addr_t rx_dma;
+
+ unsigned cs_change:1;
++ unsigned verify:1;
++ unsigned fast_write:1;
+ u8 bits_per_word;
+ u16 delay_usecs;
+ u32 speed_hz;
+@@ -482,6 +484,7 @@ struct spi_message {
+ struct spi_device *spi;
+
+ unsigned is_dma_mapped:1;
++ unsigned fast_read:1;
+
+ /* REVISIT: we might want a flag affecting the behavior of the
+ * last transfer ... allowing things like "read 16 bit length L"
diff --git a/target/linux/ar71xx/patches-2.6.39/152-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-2.6.39/152-rb4xx-spi-driver.patch
new file mode 100644
index 0000000000..1fe84da0a9
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/152-rb4xx-spi-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -317,6 +317,12 @@ config SPI_PXA2XX
+ config SPI_PXA2XX_PCI
+ def_bool SPI_PXA2XX && X86_32 && PCI
+
++config SPI_RB4XX
++ tristate "Mikrotik RB4XX SPI master"
++ depends on SPI_MASTER && AR71XX_MACH_RB4XX
++ help
++ SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C2410 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.
+ obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
+ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
+ obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
++obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o
+
+ # special build for s3c24xx spi driver with fiq support
+ spi_s3c24xx_hw-y := spi_s3c24xx.o
diff --git a/target/linux/ar71xx/patches-2.6.39/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.39/153-spi-rb4xx-cpld-driver.patch
new file mode 100644
index 0000000000..2c01c54d49
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/153-spi-rb4xx-cpld-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -479,6 +479,13 @@ config SPI_TLE62X0
+ sysfs interface, with each line presented as a kind of GPIO
+ exposing both switch control and diagnostic feedback.
+
++config SPI_RB4XX_CPLD
++ tristate "MikroTik RB4XX CPLD driver"
++ depends on AR71XX_MACH_RB4XX
++ help
++ SPI driver for the Xilinx CPLD chip present on the
++ MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -65,6 +65,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
+ # ... add above this line ...
+
+ # SPI protocol drivers (device/link on bus)
++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o
+ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
+ obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
+ # ... add above this line ...
diff --git a/target/linux/ar71xx/patches-2.6.39/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.39/200-rb4xx_nand_driver.patch
new file mode 100644
index 0000000000..53c4db2998
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/200-rb4xx_nand_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -531,4 +531,8 @@ config MTD_NAND_FSMC
+ Enables support for NAND Flash chips on the ST Microelectronics
+ Flexible Static Memory Controller (FSMC)
+
++config MTD_NAND_RB4XX
++ tristate "NAND flash driver for RouterBoard 4xx series"
++ depends on MTD_NAND && AR71XX_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA) += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
diff --git a/target/linux/ar71xx/patches-2.6.39/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.39/201-ap83_spi_controller.patch
new file mode 100644
index 0000000000..532a014db7
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/201-ap83_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SPI_MASTER) += spi.o
+
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_ALTERA) += spi_altera.o
++obj-$(CONFIG_SPI_AP83) += ap83_spi.o
+ obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
+ obj-$(CONFIG_SPI_ATH79) += ath79_spi.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -67,6 +67,14 @@ config SPI_ATH79
+ This enables support for the SPI controller present on the
+ Atheros AR71XX/AR724X/AR913X SoCs.
+
++config SPI_AP83
++ tristate "Atheros AP83 specific SPI Controller"
++ depends on SPI_MASTER && AR71XX_MACH_AP83
++ select SPI_BITBANG
++ help
++ This is a specific SPI controller driver for the Atheros AP83
++ reference board.
++
+ config SPI_AR71XX
+ tristate "Atheros AR71xx SPI Controller"
+ depends on SPI_MASTER && ATHEROS_AR71XX
diff --git a/target/linux/ar71xx/patches-2.6.39/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.39/202-spi_vsc7385_driver.patch
new file mode 100644
index 0000000000..f6d75ed963
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/202-spi_vsc7385_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -494,6 +494,11 @@ config SPI_RB4XX_CPLD
+ SPI driver for the Xilinx CPLD chip present on the
+ MikroTik RB4xx boards.
+
++config SPI_VSC7385
++ tristate "Vitesse VSC7385 ethernet switch driver"
++ help
++ SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -68,6 +68,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
+ # SPI protocol drivers (device/link on bus)
+ obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o
+ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
++obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o
+ obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
+ # ... add above this line ...
+
diff --git a/target/linux/ar71xx/patches-2.6.39/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.39/203-pb44_spi_controller.patch
new file mode 100644
index 0000000000..fb62e1d73d
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/203-pb44_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -82,6 +82,14 @@ config SPI_AR71XX
+ help
+ This is the SPI contoller driver for Atheros AR71xx.
+
++config SPI_PB44
++ tristate "Atheros PB44 board specific SPI controller"
++ depends on SPI_MASTER && AR71XX_MACH_PB44
++ select SPI_BITBANG
++ help
++ This is a specific SPI controller driver for the Atheros PB44
++ reference board.
++
+ config SPI_ATMEL
+ tristate "Atmel SPI Controller"
+ depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
+ obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX) += spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
++obj-$(CONFIG_SPI_PB44) += pb44_spi.o
+ obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o
+ obj-$(CONFIG_SPI_OC_TINY) += spi_oc_tiny.o
diff --git a/target/linux/ar71xx/patches-2.6.39/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.39/205-wndr3700-usb-led-driver.patch
new file mode 100644
index 0000000000..5a7f819fc9
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/205-wndr3700-usb-led-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -387,6 +387,13 @@ config LEDS_TRIGGERS
+ These triggers allow kernel events to drive the LEDs and can
+ be configured via sysfs. If unsure, say Y.
+
++config LEDS_WNDR3700_USB
++ tristate "NETGEAR WNDR3700 USB LED driver"
++ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
++ help
++ This option enables support for the USB LED found on the
++ NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903
+ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-2.6.39/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.39/206-nxp-74hc153-gpio-chip-driver.patch
new file mode 100644
index 0000000000..128b3a5da8
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/206-nxp-74hc153-gpio-chip-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -419,4 +419,13 @@ config AB8500_GPIO
+ depends on AB8500_CORE && BROKEN
+ help
+ Select this to enable the AB8500 IC GPIO driver
++
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++ tristate "NXP 74HC153 Dual 4-input multiplexer"
++ help
++ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++ provides a GPIO interface supporting input mode only.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o
+ obj-$(CONFIG_GPIO_MAX732X) += max732x.o
+ obj-$(CONFIG_GPIO_MC33880) += mc33880.o
+ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
++obj-$(CONFIG_GPIO_NXP_74HC153) += nxp_74hc153.o
+ obj-$(CONFIG_GPIO_74X164) += 74x164.o
+ obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
+ obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
diff --git a/target/linux/ar71xx/patches-2.6.39/207-rb750-led-driver.patch b/target/linux/ar71xx/patches-2.6.39/207-rb750-led-driver.patch
new file mode 100644
index 0000000000..b733dff44f
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/207-rb750-led-driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -394,6 +394,10 @@ config LEDS_WNDR3700_USB
+ This option enables support for the USB LED found on the
+ NETGEAR WNDR3700 board.
+
++config LEDS_RB750
++ tristate "LED driver for the Mikrotik RouterBOARD 750"
++ depends on LEDS_CLASS && AR71XX_MACH_RB750
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -41,6 +41,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
+ obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
+ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
+
diff --git a/target/linux/ar71xx/patches-2.6.39/208-rb750-nand-driver.patch b/target/linux/ar71xx/patches-2.6.39/208-rb750-nand-driver.patch
new file mode 100644
index 0000000000..d48cdf565e
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/208-rb750-nand-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -535,4 +535,8 @@ config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && AR71XX_MACH_RB4XX
+
++config MTD_NAND_RB750
++ tristate "NAND flash driver for the RouterBoard 750"
++ depends on MTD_NAND && AR71XX_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA) += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
diff --git a/target/linux/ar71xx/patches-2.6.39/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.39/300-mips_fw_myloader.patch
new file mode 100644
index 0000000000..7cf72f8efb
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/300-mips_fw_myloader.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -181,6 +181,7 @@ endif
+ #
+ libs-$(CONFIG_ARC) += arch/mips/fw/arc/
+ libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
+ libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
+ libs-y += arch/mips/fw/lib/
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -933,6 +933,9 @@ config MIPS_NILE4
+ config MIPS_DISABLE_OBSOLETE_IDE
+ bool
+
++config MYLOADER
++ bool
++
+ config SYNC_R4K
+ bool
+
diff --git a/target/linux/ar71xx/patches-2.6.39/400-2.6.35-fix-nand_scan_ident-options.patch b/target/linux/ar71xx/patches-2.6.39/400-2.6.35-fix-nand_scan_ident-options.patch
new file mode 100644
index 0000000000..0b36217b6e
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/400-2.6.35-fix-nand_scan_ident-options.patch
@@ -0,0 +1,22 @@
+--- a/drivers/mtd/nand/rb4xx_nand.c
++++ b/drivers/mtd/nand/rb4xx_nand.c
+@@ -223,7 +223,7 @@ static int __init rb4xx_nand_probe(struc
+
+ platform_set_drvdata(pdev, info);
+
+- ret = nand_scan_ident(&info->mtd, 1);
++ ret = nand_scan_ident(&info->mtd, 1, NULL);
+ if (ret) {
+ ret = -ENXIO;
+ goto err_free_info;
+--- a/drivers/mtd/nand/rb750_nand.c
++++ b/drivers/mtd/nand/rb750_nand.c
+@@ -287,7 +287,7 @@ static int __init rb750_nand_probe(struc
+
+ platform_set_drvdata(pdev, info);
+
+- ret = nand_scan_ident(&info->mtd, 1);
++ ret = nand_scan_ident(&info->mtd, 1, NULL);
+ if (ret) {
+ ret = -ENXIO;
+ goto err_free_info;
diff --git a/target/linux/ar71xx/patches-2.6.39/500-ar933x-uart-driver.patch b/target/linux/ar71xx/patches-2.6.39/500-ar933x-uart-driver.patch
new file mode 100644
index 0000000000..530d0576f9
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/500-ar933x-uart-driver.patch
@@ -0,0 +1,50 @@
+--- a/drivers/tty/serial/Kconfig
++++ b/drivers/tty/serial/Kconfig
+@@ -1612,4 +1612,27 @@ config SERIAL_MXS_AUART_CONSOLE
+ help
+ Enable a MXS AUART port to be the system console.
+
++config SERIAL_AR933X
++ bool "AR933X serial port support"
++ depends on SOC_AR933X
++ select SERIAL_CORE
++ help
++ If you have an Atheros AR933X SOC based board and want to use the
++ built-in UART of the SoC, say Y to this option.
++
++config SERIAL_AR933X_CONSOLE
++ bool "Console on AR933X serial port"
++ depends on SERIAL_AR933X=y
++ select SERIAL_CORE_CONSOLE
++ help
++ Enable a built-in UART port of the AR933X to be the system console.
++
++config SERIAL_AR933X_NR_UARTS
++ int "Maximum number of AR933X serial ports"
++ depends on SERIAL_AR933X
++ default "2"
++ help
++ Set this to the number of serial ports you want the driver
++ to support.
++
+ endmenu
+--- a/drivers/tty/serial/Makefile
++++ b/drivers/tty/serial/Makefile
+@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x6
+ obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
+ obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
+ obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
++obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -202,6 +202,10 @@
+ /* VIA VT8500 SoC */
+ #define PORT_VT8500 97
+
++/* Atheros AR933X SoC */
++#define PORT_AR933X 99
++
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
diff --git a/target/linux/ar71xx/patches-2.6.39/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.39/901-get_c0_compare_irq_function.patch
new file mode 100644
index 0000000000..71b0b3f3e2
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/901-get_c0_compare_irq_function.patch
@@ -0,0 +1,29 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -54,6 +54,7 @@
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
+ #include <asm/uasm.h>
++#include <asm/time.h>
+
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1576,6 +1577,8 @@ void __cpuinit per_cpu_trap_init(void)
+ if (cpu_has_mips_r2) {
+ cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+ cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
++ if (get_c0_compare_irq)
++ cp0_compare_irq = get_c0_compare_irq();
+ cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
+ if (cp0_perfcount_irq == cp0_compare_irq)
+ cp0_perfcount_irq = -1;
+--- a/arch/mips/include/asm/time.h
++++ b/arch/mips/include/asm/time.h
+@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
+ */
+ #ifdef CONFIG_CEVT_R4K_LIB
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ extern int r4k_clockevent_init(void);
+ #endif
+
diff --git a/target/linux/ar71xx/patches-2.6.39/950-convert-to-new-irq-functions.patch b/target/linux/ar71xx/patches-2.6.39/950-convert-to-new-irq-functions.patch
new file mode 100644
index 0000000000..7102d5e979
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.39/950-convert-to-new-irq-functions.patch
@@ -0,0 +1,259 @@
+--- a/arch/mips/ar71xx/irq.c
++++ b/arch/mips/ar71xx/irq.c
+@@ -37,13 +37,12 @@ static void ar71xx_gpio_irq_dispatch(voi
+ spurious_interrupt();
+ }
+
+-static void ar71xx_gpio_irq_unmask(unsigned int irq)
++static void ar71xx_gpio_irq_unmask(struct irq_data *d)
+ {
++ unsigned int irq = d->irq - AR71XX_GPIO_IRQ_BASE;
+ void __iomem *base = ar71xx_gpio_base;
+ u32 t;
+
+- irq -= AR71XX_GPIO_IRQ_BASE;
+-
+ t = __raw_readl(base + GPIO_REG_INT_ENABLE);
+ __raw_writel(t | (1 << irq), base + GPIO_REG_INT_ENABLE);
+
+@@ -51,13 +50,12 @@ static void ar71xx_gpio_irq_unmask(unsig
+ (void) __raw_readl(base + GPIO_REG_INT_ENABLE);
+ }
+
+-static void ar71xx_gpio_irq_mask(unsigned int irq)
++static void ar71xx_gpio_irq_mask(struct irq_data *d)
+ {
++ unsigned int irq = d->irq - AR71XX_GPIO_IRQ_BASE;
+ void __iomem *base = ar71xx_gpio_base;
+ u32 t;
+
+- irq -= AR71XX_GPIO_IRQ_BASE;
+-
+ t = __raw_readl(base + GPIO_REG_INT_ENABLE);
+ __raw_writel(t & ~(1 << irq), base + GPIO_REG_INT_ENABLE);
+
+@@ -67,9 +65,9 @@ static void ar71xx_gpio_irq_mask(unsigne
+
+ static struct irq_chip ar71xx_gpio_irq_chip = {
+ .name = "AR71XX GPIO",
+- .unmask = ar71xx_gpio_irq_unmask,
+- .mask = ar71xx_gpio_irq_mask,
+- .mask_ack = ar71xx_gpio_irq_mask,
++ .irq_unmask = ar71xx_gpio_irq_unmask,
++ .irq_mask = ar71xx_gpio_irq_mask,
++ .irq_mask_ack = ar71xx_gpio_irq_mask,
+ };
+
+ static struct irqaction ar71xx_gpio_irqaction = {
+@@ -95,7 +93,7 @@ static void __init ar71xx_gpio_irq_init(
+
+ for (i = AR71XX_GPIO_IRQ_BASE;
+ i < AR71XX_GPIO_IRQ_BASE + AR71XX_GPIO_IRQ_COUNT; i++)
+- set_irq_chip_and_handler(i, &ar71xx_gpio_irq_chip,
++ irq_set_chip_and_handler(i, &ar71xx_gpio_irq_chip,
+ handle_level_irq);
+
+ setup_irq(AR71XX_MISC_IRQ_GPIO, &ar71xx_gpio_irqaction);
+@@ -151,13 +149,12 @@ static void ar71xx_misc_irq_dispatch(voi
+ spurious_interrupt();
+ }
+
+-static void ar71xx_misc_irq_unmask(unsigned int irq)
++static void ar71xx_misc_irq_unmask(struct irq_data *d)
+ {
++ unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE;
+ void __iomem *base = ar71xx_reset_base;
+ u32 t;
+
+- irq -= AR71XX_MISC_IRQ_BASE;
+-
+ t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+
+@@ -165,13 +162,12 @@ static void ar71xx_misc_irq_unmask(unsig
+ (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+ }
+
+-static void ar71xx_misc_irq_mask(unsigned int irq)
++static void ar71xx_misc_irq_mask(struct irq_data *d)
+ {
++ unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE;
+ void __iomem *base = ar71xx_reset_base;
+ u32 t;
+
+- irq -= AR71XX_MISC_IRQ_BASE;
+-
+ t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+
+@@ -179,13 +175,12 @@ static void ar71xx_misc_irq_mask(unsigne
+ (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+ }
+
+-static void ar724x_misc_irq_ack(unsigned int irq)
++static void ar724x_misc_irq_ack(struct irq_data *d)
+ {
++ unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE;
+ void __iomem *base = ar71xx_reset_base;
+ u32 t;
+
+- irq -= AR71XX_MISC_IRQ_BASE;
+-
+ t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
+ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_STATUS);
+
+@@ -195,8 +190,8 @@ static void ar724x_misc_irq_ack(unsigned
+
+ static struct irq_chip ar71xx_misc_irq_chip = {
+ .name = "AR71XX MISC",
+- .unmask = ar71xx_misc_irq_unmask,
+- .mask = ar71xx_misc_irq_mask,
++ .irq_unmask = ar71xx_misc_irq_unmask,
++ .irq_mask = ar71xx_misc_irq_mask,
+ };
+
+ static struct irqaction ar71xx_misc_irqaction = {
+@@ -221,16 +216,16 @@ static void __init ar71xx_misc_irq_init(
+ case AR71XX_SOC_AR9341:
+ case AR71XX_SOC_AR9342:
+ case AR71XX_SOC_AR9344:
+- ar71xx_misc_irq_chip.ack = ar724x_misc_irq_ack;
++ ar71xx_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+ break;
+ default:
+- ar71xx_misc_irq_chip.mask_ack = ar71xx_misc_irq_mask;
++ ar71xx_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
+ break;
+ }
+
+ for (i = AR71XX_MISC_IRQ_BASE;
+ i < AR71XX_MISC_IRQ_BASE + AR71XX_MISC_IRQ_COUNT; i++)
+- set_irq_chip_and_handler(i, &ar71xx_misc_irq_chip,
++ irq_set_chip_and_handler(i, &ar71xx_misc_irq_chip,
+ handle_level_irq);
+
+ setup_irq(AR71XX_CPU_IRQ_MISC, &ar71xx_misc_irqaction);
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -329,13 +329,12 @@ static void ar71xx_pci_irq_handler(unsig
+ spurious_interrupt();
+ }
+
+-static void ar71xx_pci_irq_unmask(unsigned int irq)
++static void ar71xx_pci_irq_unmask(struct irq_data *d)
+ {
++ unsigned int irq = d->irq - AR71XX_PCI_IRQ_BASE;
+ void __iomem *base = ar71xx_reset_base;
+ u32 t;
+
+- irq -= AR71XX_PCI_IRQ_BASE;
+-
+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+@@ -343,13 +342,12 @@ static void ar71xx_pci_irq_unmask(unsign
+ (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ }
+
+-static void ar71xx_pci_irq_mask(unsigned int irq)
++static void ar71xx_pci_irq_mask(struct irq_data *d)
+ {
++ unsigned int irq = d->irq - AR71XX_PCI_IRQ_BASE;
+ void __iomem *base = ar71xx_reset_base;
+ u32 t;
+
+- irq -= AR71XX_PCI_IRQ_BASE;
+-
+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+@@ -359,9 +357,9 @@ static void ar71xx_pci_irq_mask(unsigned
+
+ static struct irq_chip ar71xx_pci_irq_chip = {
+ .name = "AR71XX PCI ",
+- .mask = ar71xx_pci_irq_mask,
+- .unmask = ar71xx_pci_irq_unmask,
+- .mask_ack = ar71xx_pci_irq_mask,
++ .irq_mask = ar71xx_pci_irq_mask,
++ .irq_unmask = ar71xx_pci_irq_unmask,
++ .irq_mask_ack = ar71xx_pci_irq_mask,
+ };
+
+ static void __init ar71xx_pci_irq_init(void)
+@@ -374,10 +372,10 @@ static void __init ar71xx_pci_irq_init(v
+
+ for (i = AR71XX_PCI_IRQ_BASE;
+ i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++)
+- set_irq_chip_and_handler(i, &ar71xx_pci_irq_chip,
++ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
+ handle_level_irq);
+
+- set_irq_chained_handler(AR71XX_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
++ irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
+ }
+
+ int __init ar71xx_pcibios_init(void)
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -280,15 +280,13 @@ static void ar724x_pci_irq_handler(unsig
+ spurious_interrupt();
+ }
+
+-static void ar724x_pci_irq_unmask(unsigned int irq)
++static void ar724x_pci_irq_unmask(struct irq_data *d)
+ {
+ void __iomem *base = ar724x_pci_ctrl_base;
+ u32 t;
+
+- switch (irq) {
++ switch (d->irq) {
+ case AR71XX_PCI_IRQ_DEV0:
+- irq -= AR71XX_PCI_IRQ_BASE;
+-
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t | AR724X_PCI_INT_DEV0,
+ base + AR724X_PCI_REG_INT_MASK);
+@@ -297,15 +295,13 @@ static void ar724x_pci_irq_unmask(unsign
+ }
+ }
+
+-static void ar724x_pci_irq_mask(unsigned int irq)
++static void ar724x_pci_irq_mask(struct irq_data *d)
+ {
+ void __iomem *base = ar724x_pci_ctrl_base;
+ u32 t;
+
+- switch (irq) {
++ switch (d->irq) {
+ case AR71XX_PCI_IRQ_DEV0:
+- irq -= AR71XX_PCI_IRQ_BASE;
+-
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t & ~AR724X_PCI_INT_DEV0,
+ base + AR724X_PCI_REG_INT_MASK);
+@@ -324,9 +320,9 @@ static void ar724x_pci_irq_mask(unsigned
+
+ static struct irq_chip ar724x_pci_irq_chip = {
+ .name = "AR724X PCI ",
+- .mask = ar724x_pci_irq_mask,
+- .unmask = ar724x_pci_irq_unmask,
+- .mask_ack = ar724x_pci_irq_mask,
++ .irq_mask = ar724x_pci_irq_mask,
++ .irq_unmask = ar724x_pci_irq_unmask,
++ .irq_mask_ack = ar724x_pci_irq_mask,
+ };
+
+ static void __init ar724x_pci_irq_init(void)
+@@ -346,10 +342,10 @@ static void __init ar724x_pci_irq_init(v
+
+ for (i = AR71XX_PCI_IRQ_BASE;
+ i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++)
+- set_irq_chip_and_handler(i, &ar724x_pci_irq_chip,
++ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
+ handle_level_irq);
+
+- set_irq_chained_handler(AR71XX_CPU_IRQ_IP2, ar724x_pci_irq_handler);
++ irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar724x_pci_irq_handler);
+ }
+
+ int __init ar724x_pcibios_init(void)