diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips')
5 files changed, 344 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 52b9b5527e..2e0145cbb5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -512,6 +512,22 @@ config ATH79_MACH_DLAN_PRO_1200_AC select ATH79_DEV_NFC select ATH79_DEV_USB +config ATH79_MACH_DOMYWIFI_DW33D + bool "DomyWifi DW33D support" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_NFC + select ATH79_DEV_WMAC + select ATH79_DEV_USB + select MTD_NAND + select MTD_NAND_ECC + select MTD_NAND_AR934X + select MTD_NAND_AR934X_HW_ECC + config ATH79_MACH_DR344 bool "Wallys DR344 board support" select SOC_AS934X @@ -681,6 +697,17 @@ config ATH79_MACH_WRT160NL select ATH79_DEV_WMAC select ATH79_NVRAM +config ATH79_MACH_E2100L + bool "Linksys E2100L board support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_NVRAM + config ATH79_MACH_WRT400N bool "Linksys WRT400N board support" select SOC_AR71XX diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index f8b0b2bb5a..d8f1b32d62 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o +obj-$(CONFIG_ATH79_MACH_DOMYWIFI_DW33D) += mach-domywifi-dw33d.o obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o @@ -194,6 +195,7 @@ obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o +obj-$(CONFIG_ATH79_MACH_E2100L) += mach-e2100l.o obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o obj-$(CONFIG_ATH79_MACH_WRTNODE2Q) += mach-wrtnode2q.o obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c new file mode 100644 index 0000000000..52d9da4792 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c @@ -0,0 +1,187 @@ +/* + * DomyWifi DW33D support + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/platform_device.h> +#include <linux/ar8216_platform.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/platform/ar934x_nfc.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-nfc.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define DW33D_GPIO_LED_MMC 4 +#define DW33D_GPIO_LED_WLAN_2G 13 +#define DW33D_GPIO_LED_STATUS 14 +#define DW33D_GPIO_LED_USB 15 +#define DW33D_GPIO_LED_INTERNET 22 + +#define DW33D_GPIO_BTN_RESET 17 + +#define DW33D_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DW33D_KEYS_DEBOUNCE_INTERVAL (3 * DW33D_KEYS_POLL_INTERVAL) + +#define DW33D_MAC0_OFFSET 0 +#define DW33D_MAC1_OFFSET 6 +#define DW33D_WMAC_OFFSET 12 +#define DW33D_WMAC_CALDATA_OFFSET 0x1000 +#define DW33D_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led dw33d_leds_gpio[] __initdata = { + { + .name = "dw33d:blue:status", + .gpio = DW33D_GPIO_LED_STATUS, + .active_low = 1, + }, + { + .name = "dw33d:blue:mmc", + .gpio = DW33D_GPIO_LED_MMC, + .active_low = 1, + }, + { + .name = "dw33d:blue:usb", + .gpio = DW33D_GPIO_LED_USB, + .active_low = 1, + }, + { + .name = "dw33d:blue:wlan-2g", + .gpio = DW33D_GPIO_LED_WLAN_2G, + .active_low = 1, + }, + { + .name = "dw33d:blue:internet", + .gpio = DW33D_GPIO_LED_INTERNET, + .active_low = 1, + } +}; + +static struct gpio_keys_button dw33d_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DW33D_KEYS_DEBOUNCE_INTERVAL, + .gpio = DW33D_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +/* GMAC6 of the QCA8337 switch is connected to the QCA9558 SoC via SGMII */ +static struct ar8327_pad_cfg dw33d_qca8337_pad6_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +/* GMAC0 of the QCA8337 switch is connected to the QCA9558 SoC via RGMII */ +static struct ar8327_pad_cfg dw33d_qca8337_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data dw33d_qca8337_data = { + .pad0_cfg = &dw33d_qca8337_pad0_cfg, + .pad6_cfg = &dw33d_qca8337_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .port6_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info dw33d_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &dw33d_qca8337_data, + }, +}; + +static void __init dw33d_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dw33d_leds_gpio), + dw33d_leds_gpio); + ath79_register_gpio_keys_polled(-1, DW33D_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dw33d_gpio_keys), + dw33d_gpio_keys); + + ath79_register_usb(); + ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); + ath79_register_nfc(); + ath79_register_pci(); + + ath79_register_wmac(art + DW33D_WMAC_CALDATA_OFFSET, art + DW33D_WMAC_OFFSET); + + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + DW33D_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, art + DW33D_MAC1_OFFSET, 0); + + mdiobus_register_board_info(dw33d_mdio0_info, + ARRAY_SIZE(dw33d_mdio0_info)); + + /* GMAC0 is connected to the RMGII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x56000000; + + ath79_register_eth(0); + + /* GMAC1 is connected tot eh SGMII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_DOMYWIFI_DW33D, "DW33D", + "DomyWifi DW33D", + dw33d_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c new file mode 100644 index 0000000000..c09083460e --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c @@ -0,0 +1,126 @@ +/* + * Linksys E2100L board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ath79/ath79.h> + +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "nvram.h" +#include "machtypes.h" + +#define E2100L_GPIO_LED_POWER 14 +#define E2100L_GPIO_LED_WPS_AMBER 9 +#define E2100L_GPIO_LED_WPS_BLUE 8 +#define E2100L_GPIO_LED_WLAN 6 + +#define E2100L_GPIO_BTN_WPS 7 +#define E2100L_GPIO_BTN_RESET 21 + +#define E2100L_KEYS_POLL_INTERVAL 20 /* msecs */ +#define E2100L_KEYS_DEBOUNCE_INTERVAL (3 * E2100L_KEYS_POLL_INTERVAL) + +#define E2100L_NVRAM_ADDR 0x1f7e0000 +#define E2100L_NVRAM_SIZE 0x10000 + +static const char *e2100l_part_probes[] = { + "cybertan", + NULL, +}; + +static struct flash_platform_data e2100l_flash_data = { + .part_probes = e2100l_part_probes, +}; + +static struct gpio_led e2100l_leds_gpio[] __initdata = { + { + .name = "e2100l:blue:power", + .gpio = E2100L_GPIO_LED_POWER, + .active_low = 1, + .default_trigger = "default-on", + }, { + .name = "e2100l:amber:wps", + .gpio = E2100L_GPIO_LED_WPS_AMBER, + .active_low = 1, + }, { + .name = "e2100l:blue:wps", + .gpio = E2100L_GPIO_LED_WPS_BLUE, + .active_low = 1, + }, { + .name = "e2100l:blue:wlan", + .gpio = E2100L_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button e2100l_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = E2100L_KEYS_DEBOUNCE_INTERVAL, + .gpio = E2100L_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = E2100L_KEYS_DEBOUNCE_INTERVAL, + .gpio = E2100L_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init e2100l_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(E2100L_NVRAM_ADDR); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac[6]; + + if (ath79_nvram_parse_mac_addr(nvram, E2100L_NVRAM_SIZE, + "lan_hwaddr=", mac) == 0) { + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + } + + ath79_register_mdio(0, 0x0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth0_data.phy_mask = 0x01; + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ath79_eth1_data.phy_mask = 0x10; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_m25p80(&e2100l_flash_data); + + ath79_register_usb(); + + if (ath79_nvram_parse_mac_addr(nvram, E2100L_NVRAM_SIZE, + "wl0_hwaddr=", mac) == 0) + ath79_register_wmac(eeprom, mac); + else + ath79_register_wmac(eeprom, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(e2100l_leds_gpio), + e2100l_leds_gpio); + + ath79_register_gpio_keys_polled(-1, E2100L_KEYS_POLL_INTERVAL, + ARRAY_SIZE(e2100l_gpio_keys), + e2100l_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_E2100L, "E2100L", "Linksys E2100L", + e2100l_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index f40b4a43b5..2a6c61513f 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -71,6 +71,7 @@ enum ath79_mach_type { ATH79_MACH_DLAN_HOTSPOT, /* devolo dLAN Hotspot */ ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/ + ATH79_MACH_DOMYWIFI_DW33D, /* DomyWifi DW33D */ ATH79_MACH_DR344, /* Wallys DR344 */ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ ATH79_MACH_ESR900, /* EnGenius ESR900 */ @@ -255,6 +256,7 @@ enum ath79_mach_type { ATH79_MACH_WPJ531, /* Compex WPJ531 */ ATH79_MACH_WPJ558, /* Compex WPJ558 */ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ + ATH79_MACH_E2100L, /* Linksys E2100L */ ATH79_MACH_WRT400N, /* Linksys WRT400N */ ATH79_MACH_WRTNODE2Q, /* WRTnode2Q */ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ |