aboutsummaryrefslogtreecommitdiffstats
path: root/package/mac80211/src/include
diff options
context:
space:
mode:
Diffstat (limited to 'package/mac80211/src/include')
-rw-r--r--package/mac80211/src/include/linux/ieee80211.h414
-rw-r--r--package/mac80211/src/include/linux/nl80211.h129
-rw-r--r--package/mac80211/src/include/net/cfg80211.h83
-rw-r--r--package/mac80211/src/include/net/ieee80211_radiotap.h268
-rw-r--r--package/mac80211/src/include/net/mac80211.h1429
5 files changed, 2323 insertions, 0 deletions
diff --git a/package/mac80211/src/include/linux/ieee80211.h b/package/mac80211/src/include/linux/ieee80211.h
new file mode 100644
index 0000000000..30621c2715
--- /dev/null
+++ b/package/mac80211/src/include/linux/ieee80211.h
@@ -0,0 +1,414 @@
+/*
+ * IEEE 802.11 defines
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright (c) 2005, Devicescape Software, Inc.
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef IEEE80211_H
+#define IEEE80211_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define FCS_LEN 4
+
+#define IEEE80211_FCTL_VERS 0x0003
+#define IEEE80211_FCTL_FTYPE 0x000c
+#define IEEE80211_FCTL_STYPE 0x00f0
+#define IEEE80211_FCTL_TODS 0x0100
+#define IEEE80211_FCTL_FROMDS 0x0200
+#define IEEE80211_FCTL_MOREFRAGS 0x0400
+#define IEEE80211_FCTL_RETRY 0x0800
+#define IEEE80211_FCTL_PM 0x1000
+#define IEEE80211_FCTL_MOREDATA 0x2000
+#define IEEE80211_FCTL_PROTECTED 0x4000
+#define IEEE80211_FCTL_ORDER 0x8000
+
+#define IEEE80211_SCTL_FRAG 0x000F
+#define IEEE80211_SCTL_SEQ 0xFFF0
+
+#define IEEE80211_FTYPE_MGMT 0x0000
+#define IEEE80211_FTYPE_CTL 0x0004
+#define IEEE80211_FTYPE_DATA 0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ 0x0000
+#define IEEE80211_STYPE_ASSOC_RESP 0x0010
+#define IEEE80211_STYPE_REASSOC_REQ 0x0020
+#define IEEE80211_STYPE_REASSOC_RESP 0x0030
+#define IEEE80211_STYPE_PROBE_REQ 0x0040
+#define IEEE80211_STYPE_PROBE_RESP 0x0050
+#define IEEE80211_STYPE_BEACON 0x0080
+#define IEEE80211_STYPE_ATIM 0x0090
+#define IEEE80211_STYPE_DISASSOC 0x00A0
+#define IEEE80211_STYPE_AUTH 0x00B0
+#define IEEE80211_STYPE_DEAUTH 0x00C0
+#define IEEE80211_STYPE_ACTION 0x00D0
+
+/* control */
+#define IEEE80211_STYPE_PSPOLL 0x00A0
+#define IEEE80211_STYPE_RTS 0x00B0
+#define IEEE80211_STYPE_CTS 0x00C0
+#define IEEE80211_STYPE_ACK 0x00D0
+#define IEEE80211_STYPE_CFEND 0x00E0
+#define IEEE80211_STYPE_CFENDACK 0x00F0
+
+/* data */
+#define IEEE80211_STYPE_DATA 0x0000
+#define IEEE80211_STYPE_DATA_CFACK 0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL 0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
+#define IEEE80211_STYPE_NULLFUNC 0x0040
+#define IEEE80211_STYPE_CFACK 0x0050
+#define IEEE80211_STYPE_CFPOLL 0x0060
+#define IEEE80211_STYPE_CFACKPOLL 0x0070
+#define IEEE80211_STYPE_QOS_DATA 0x0080
+#define IEEE80211_STYPE_QOS_DATA_CFACK 0x0090
+#define IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0
+#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0
+#define IEEE80211_STYPE_QOS_NULLFUNC 0x00C0
+#define IEEE80211_STYPE_QOS_CFACK 0x00D0
+#define IEEE80211_STYPE_QOS_CFPOLL 0x00E0
+#define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0
+
+
+/* miscellaneous IEEE 802.11 constants */
+#define IEEE80211_MAX_FRAG_THRESHOLD 2346
+#define IEEE80211_MAX_RTS_THRESHOLD 2347
+#define IEEE80211_MAX_AID 2007
+#define IEEE80211_MAX_TIM_LEN 251
+#define IEEE80211_MAX_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+#define IEEE80211_MAX_SSID_LEN 32
+
+struct ieee80211_hdr {
+ __le16 frame_control;
+ __le16 duration_id;
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ __le16 seq_ctrl;
+ u8 addr4[6];
+} __attribute__ ((packed));
+
+
+struct ieee80211_mgmt {
+ __le16 frame_control;
+ __le16 duration;
+ u8 da[6];
+ u8 sa[6];
+ u8 bssid[6];
+ __le16 seq_ctrl;
+ union {
+ struct {
+ __le16 auth_alg;
+ __le16 auth_transaction;
+ __le16 status_code;
+ /* possibly followed by Challenge text */
+ u8 variable[0];
+ } __attribute__ ((packed)) auth;
+ struct {
+ __le16 reason_code;
+ } __attribute__ ((packed)) deauth;
+ struct {
+ __le16 capab_info;
+ __le16 listen_interval;
+ /* followed by SSID and Supported rates */
+ u8 variable[0];
+ } __attribute__ ((packed)) assoc_req;
+ struct {
+ __le16 capab_info;
+ __le16 status_code;
+ __le16 aid;
+ /* followed by Supported rates */
+ u8 variable[0];
+ } __attribute__ ((packed)) assoc_resp, reassoc_resp;
+ struct {
+ __le16 capab_info;
+ __le16 listen_interval;
+ u8 current_ap[6];
+ /* followed by SSID and Supported rates */
+ u8 variable[0];
+ } __attribute__ ((packed)) reassoc_req;
+ struct {
+ __le16 reason_code;
+ } __attribute__ ((packed)) disassoc;
+ struct {
+ __le64 timestamp;
+ __le16 beacon_int;
+ __le16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params, TIM */
+ u8 variable[0];
+ } __attribute__ ((packed)) beacon;
+ struct {
+ /* only variable items: SSID, Supported rates */
+ u8 variable[0];
+ } __attribute__ ((packed)) probe_req;
+ struct {
+ __le64 timestamp;
+ __le16 beacon_int;
+ __le16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params */
+ u8 variable[0];
+ } __attribute__ ((packed)) probe_resp;
+ struct {
+ u8 category;
+ union {
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u8 status_code;
+ u8 variable[0];
+ } __attribute__ ((packed)) wme_action;
+ struct{
+ u8 action_code;
+ u8 element_id;
+ u8 length;
+ u8 switch_mode;
+ u8 new_chan;
+ u8 switch_count;
+ } __attribute__((packed)) chan_switch;
+ } u;
+ } __attribute__ ((packed)) action;
+ } u;
+} __attribute__ ((packed));
+
+
+/* Control frames */
+struct ieee80211_rts {
+ __le16 frame_control;
+ __le16 duration;
+ u8 ra[6];
+ u8 ta[6];
+} __attribute__ ((packed));
+
+struct ieee80211_cts {
+ __le16 frame_control;
+ __le16 duration;
+ u8 ra[6];
+} __attribute__ ((packed));
+
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_FAST_BSS_TRANSITION 2
+#define WLAN_AUTH_LEAP 128
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_ESS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+/* 802.11h */
+#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
+#define WLAN_CAPABILITY_QOS (1<<9)
+#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10)
+#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
+
+/* 802.11g ERP information element */
+#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
+#define WLAN_ERP_USE_PROTECTION (1<<1)
+#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
+
+/* WLAN_ERP_BARKER_PREAMBLE values */
+enum {
+ WLAN_ERP_PREAMBLE_SHORT = 0,
+ WLAN_ERP_PREAMBLE_LONG = 1,
+};
+
+/* Status codes */
+enum ieee80211_statuscode {
+ WLAN_STATUS_SUCCESS = 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
+ WLAN_STATUS_CAPS_UNSUPPORTED = 10,
+ WLAN_STATUS_REASSOC_NO_ASSOC = 11,
+ WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
+ WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
+ WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
+ WLAN_STATUS_CHALLENGE_FAIL = 15,
+ WLAN_STATUS_AUTH_TIMEOUT = 16,
+ WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
+ WLAN_STATUS_ASSOC_DENIED_RATES = 18,
+ /* 802.11b */
+ WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
+ WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
+ WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
+ /* 802.11h */
+ WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
+ WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
+ WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
+ /* 802.11g */
+ WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
+ WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+ /* 802.11i */
+ WLAN_STATUS_INVALID_IE = 40,
+ WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
+ WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
+ WLAN_STATUS_INVALID_AKMP = 43,
+ WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
+ WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
+ WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
+};
+
+
+/* Reason codes */
+enum ieee80211_reasoncode {
+ WLAN_REASON_UNSPECIFIED = 1,
+ WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
+ WLAN_REASON_DEAUTH_LEAVING = 3,
+ WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
+ WLAN_REASON_DISASSOC_AP_BUSY = 5,
+ WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
+ WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
+ WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
+ WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
+ /* 802.11h */
+ WLAN_REASON_DISASSOC_BAD_POWER = 10,
+ WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
+ /* 802.11i */
+ WLAN_REASON_INVALID_IE = 13,
+ WLAN_REASON_MIC_FAILURE = 14,
+ WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
+ WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
+ WLAN_REASON_IE_DIFFERENT = 17,
+ WLAN_REASON_INVALID_GROUP_CIPHER = 18,
+ WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
+ WLAN_REASON_INVALID_AKMP = 20,
+ WLAN_REASON_UNSUPP_RSN_VERSION = 21,
+ WLAN_REASON_INVALID_RSN_IE_CAP = 22,
+ WLAN_REASON_IEEE8021X_FAILED = 23,
+ WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
+};
+
+
+/* Information Element IDs */
+enum ieee80211_eid {
+ WLAN_EID_SSID = 0,
+ WLAN_EID_SUPP_RATES = 1,
+ WLAN_EID_FH_PARAMS = 2,
+ WLAN_EID_DS_PARAMS = 3,
+ WLAN_EID_CF_PARAMS = 4,
+ WLAN_EID_TIM = 5,
+ WLAN_EID_IBSS_PARAMS = 6,
+ WLAN_EID_CHALLENGE = 16,
+ /* 802.11d */
+ WLAN_EID_COUNTRY = 7,
+ WLAN_EID_HP_PARAMS = 8,
+ WLAN_EID_HP_TABLE = 9,
+ WLAN_EID_REQUEST = 10,
+ /* 802.11h */
+ WLAN_EID_PWR_CONSTRAINT = 32,
+ WLAN_EID_PWR_CAPABILITY = 33,
+ WLAN_EID_TPC_REQUEST = 34,
+ WLAN_EID_TPC_REPORT = 35,
+ WLAN_EID_SUPPORTED_CHANNELS = 36,
+ WLAN_EID_CHANNEL_SWITCH = 37,
+ WLAN_EID_MEASURE_REQUEST = 38,
+ WLAN_EID_MEASURE_REPORT = 39,
+ WLAN_EID_QUIET = 40,
+ WLAN_EID_IBSS_DFS = 41,
+ /* 802.11g */
+ WLAN_EID_ERP_INFO = 42,
+ WLAN_EID_EXT_SUPP_RATES = 50,
+ /* 802.11i */
+ WLAN_EID_RSN = 48,
+ WLAN_EID_WPA = 221,
+ WLAN_EID_GENERIC = 221,
+ WLAN_EID_VENDOR_SPECIFIC = 221,
+ WLAN_EID_QOS_PARAMETER = 222
+};
+
+/* cipher suite selectors */
+#define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00
+#define WLAN_CIPHER_SUITE_WEP40 0x000FAC01
+#define WLAN_CIPHER_SUITE_TKIP 0x000FAC02
+/* reserved: 0x000FAC03 */
+#define WLAN_CIPHER_SUITE_CCMP 0x000FAC04
+#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05
+
+#define WLAN_MAX_KEY_LEN 32
+
+/**
+ * ieee80211_get_SA - get pointer to SA
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the source address (SA). It does not verify that the
+ * header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ *
+ * @hdr: the frame
+ */
+static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
+{
+ u8 *raw = (u8 *) hdr;
+ u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */
+
+ switch (tofrom) {
+ case 2:
+ return hdr->addr3;
+ case 3:
+ return hdr->addr4;
+ }
+ return hdr->addr2;
+}
+
+/**
+ * ieee80211_get_DA - get pointer to DA
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the destination address (DA). It does not verify that
+ * the header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ *
+ * @hdr: the frame
+ */
+static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
+{
+ u8 *raw = (u8 *) hdr;
+ u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */
+
+ if (to_ds)
+ return hdr->addr3;
+ return hdr->addr1;
+}
+
+/**
+ * ieee80211_get_morefrag - determine whether the MOREFRAGS bit is set
+ *
+ * This function determines whether the "more fragments" bit is set
+ * in the frame.
+ *
+ * @hdr: the frame
+ */
+static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr)
+{
+ return (le16_to_cpu(hdr->frame_control) &
+ IEEE80211_FCTL_MOREFRAGS) != 0;
+}
+
+#endif /* IEEE80211_H */
diff --git a/package/mac80211/src/include/linux/nl80211.h b/package/mac80211/src/include/linux/nl80211.h
new file mode 100644
index 0000000000..a5dd030d50
--- /dev/null
+++ b/package/mac80211/src/include/linux/nl80211.h
@@ -0,0 +1,129 @@
+#ifndef __LINUX_NL80211_H
+#define __LINUX_NL80211_H
+/*
+ * 802.11 netlink interface public header
+ *
+ * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
+ */
+
+/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
+ * to get a list of all present wiphys.
+ * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and
+ * %NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
+ * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
+ * %NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
+ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+ *
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+ * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
+ * on an %NL80211_ATTR_IFINDEX is supported.
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+ %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+ * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
+ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
+ * be sent from userspace to request creation of a new virtual interface,
+ * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
+ * %NL80211_ATTR_IFNAME.
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
+ * userspace to request deletion of a virtual interface, then requires
+ * attribute %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+enum nl80211_commands {
+/* don't change the order or add anything inbetween, this is ABI! */
+ NL80211_CMD_UNSPEC,
+
+ NL80211_CMD_GET_WIPHY, /* can dump */
+ NL80211_CMD_SET_WIPHY,
+ NL80211_CMD_NEW_WIPHY,
+ NL80211_CMD_DEL_WIPHY,
+
+ NL80211_CMD_GET_INTERFACE, /* can dump */
+ NL80211_CMD_SET_INTERFACE,
+ NL80211_CMD_NEW_INTERFACE,
+ NL80211_CMD_DEL_INTERFACE,
+
+ /* add commands here */
+
+ /* used to define NL80211_CMD_MAX below */
+ __NL80211_CMD_AFTER_LAST,
+ NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
+};
+
+
+/**
+ * enum nl80211_attrs - nl80211 netlink attributes
+ *
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
+ * /sys/class/ieee80211/<phyname>/index
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ *
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
+ * @NL80211_ATTR_IFNAME: network interface name
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
+ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_attrs {
+/* don't change the order or add anything inbetween, this is ABI! */
+ NL80211_ATTR_UNSPEC,
+
+ NL80211_ATTR_WIPHY,
+ NL80211_ATTR_WIPHY_NAME,
+
+ NL80211_ATTR_IFINDEX,
+ NL80211_ATTR_IFNAME,
+ NL80211_ATTR_IFTYPE,
+
+ /* add attributes here, update the policy in nl80211.c */
+
+ __NL80211_ATTR_AFTER_LAST,
+ NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_iftype - (virtual) interface types
+ *
+ * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
+ * @NL80211_IFTYPE_ADHOC: independent BSS member
+ * @NL80211_IFTYPE_STATION: managed BSS member
+ * @NL80211_IFTYPE_AP: access point
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
+ * @NL80211_IFTYPE_WDS: wireless distribution interface
+ * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+ * @__NL80211_IFTYPE_AFTER_LAST: internal use
+ *
+ * These values are used with the %NL80211_ATTR_IFTYPE
+ * to set the type of an interface.
+ *
+ */
+enum nl80211_iftype {
+ NL80211_IFTYPE_UNSPECIFIED,
+ NL80211_IFTYPE_ADHOC,
+ NL80211_IFTYPE_STATION,
+ NL80211_IFTYPE_AP,
+ NL80211_IFTYPE_AP_VLAN,
+ NL80211_IFTYPE_WDS,
+ NL80211_IFTYPE_MONITOR,
+
+ /* keep last */
+ __NL80211_IFTYPE_AFTER_LAST,
+ NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1
+};
+
+#endif /* __LINUX_NL80211_H */
diff --git a/package/mac80211/src/include/net/cfg80211.h b/package/mac80211/src/include/net/cfg80211.h
new file mode 100644
index 0000000000..d30960e175
--- /dev/null
+++ b/package/mac80211/src/include/net/cfg80211.h
@@ -0,0 +1,83 @@
+#ifndef __NET_CFG80211_H
+#define __NET_CFG80211_H
+
+#include <linux/netlink.h>
+#include <linux/skbuff.h>
+#include <linux/nl80211.h>
+#include <net/genetlink.h>
+
+/*
+ * 802.11 configuration in-kernel interface
+ *
+ * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
+ */
+
+/* Radiotap header iteration
+ * implemented in net/wireless/radiotap.c
+ * docs in Documentation/networking/radiotap-headers.txt
+ */
+/**
+ * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
+ * @rtheader: pointer to the radiotap header we are walking through
+ * @max_length: length of radiotap header in cpu byte ordering
+ * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
+ * @this_arg: pointer to current radiotap arg
+ * @arg_index: internal next argument index
+ * @arg: internal next argument pointer
+ * @next_bitmap: internal pointer to next present u32
+ * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ */
+
+struct ieee80211_radiotap_iterator {
+ struct ieee80211_radiotap_header *rtheader;
+ int max_length;
+ int this_arg_index;
+ u8 *this_arg;
+
+ int arg_index;
+ u8 *arg;
+ __le32 *next_bitmap;
+ u32 bitmap_shifter;
+};
+
+extern int ieee80211_radiotap_iterator_init(
+ struct ieee80211_radiotap_iterator *iterator,
+ struct ieee80211_radiotap_header *radiotap_header,
+ int max_length);
+
+extern int ieee80211_radiotap_iterator_next(
+ struct ieee80211_radiotap_iterator *iterator);
+
+
+/* from net/wireless.h */
+struct wiphy;
+
+/**
+ * struct cfg80211_ops - backend description for wireless configuration
+ *
+ * This struct is registered by fullmac card drivers and/or wireless stacks
+ * in order to handle configuration requests on their interfaces.
+ *
+ * All callbacks except where otherwise noted should return 0
+ * on success or a negative error code.
+ *
+ * All operations are currently invoked under rtnl for consistency with the
+ * wireless extensions but this is subject to reevaluation as soon as this
+ * code is used more widely and we have a first user without wext.
+ *
+ * @add_virtual_intf: create a new virtual interface with the given name
+ *
+ * @del_virtual_intf: remove the virtual interface determined by ifindex.
+ *
+ * @change_virtual_intf: change type of virtual interface
+ *
+ */
+struct cfg80211_ops {
+ int (*add_virtual_intf)(struct wiphy *wiphy, char *name,
+ enum nl80211_iftype type);
+ int (*del_virtual_intf)(struct wiphy *wiphy, int ifindex);
+ int (*change_virtual_intf)(struct wiphy *wiphy, int ifindex,
+ enum nl80211_iftype type);
+};
+
+#endif /* __NET_CFG80211_H */
diff --git a/package/mac80211/src/include/net/ieee80211_radiotap.h b/package/mac80211/src/include/net/ieee80211_radiotap.h
new file mode 100644
index 0000000000..dfd8bf66ce
--- /dev/null
+++ b/package/mac80211/src/include/net/ieee80211_radiotap.h
@@ -0,0 +1,268 @@
+/* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */
+/* $NetBSD: ieee80211_radiotap.h,v 1.11 2005/06/22 06:16:02 dyoung Exp $ */
+
+/*-
+ * Copyright (c) 2003, 2004 David Young. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of David Young may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID
+ * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ */
+
+/*
+ * Modifications to fit into the linux IEEE 802.11 stack,
+ * Mike Kershaw (dragorn@kismetwireless.net)
+ */
+
+#ifndef IEEE80211RADIOTAP_H
+#define IEEE80211RADIOTAP_H
+
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+
+/* Radiotap header version (from official NetBSD feed) */
+#define IEEE80211RADIOTAP_VERSION "1.5"
+/* Base version of the radiotap packet header data */
+#define PKTHDR_RADIOTAP_VERSION 0
+
+/* A generic radio capture format is desirable. There is one for
+ * Linux, but it is neither rigidly defined (there were not even
+ * units given for some fields) nor easily extensible.
+ *
+ * I suggest the following extensible radio capture format. It is
+ * based on a bitmap indicating which fields are present.
+ *
+ * I am trying to describe precisely what the application programmer
+ * should expect in the following, and for that reason I tell the
+ * units and origin of each measurement (where it applies), or else I
+ * use sufficiently weaselly language ("is a monotonically nondecreasing
+ * function of...") that I cannot set false expectations for lawyerly
+ * readers.
+ */
+
+/* XXX tcpdump/libpcap do not tolerate variable-length headers,
+ * yet, so we pad every radiotap header to 64 bytes. Ugh.
+ */
+#define IEEE80211_RADIOTAP_HDRLEN 64
+
+/* The radio capture header precedes the 802.11 header.
+ * All data in the header is little endian on all platforms.
+ */
+struct ieee80211_radiotap_header {
+ u8 it_version; /* Version 0. Only increases
+ * for drastic changes,
+ * introduction of compatible
+ * new fields does not count.
+ */
+ u8 it_pad;
+ __le16 it_len; /* length of the whole
+ * header in bytes, including
+ * it_version, it_pad,
+ * it_len, and data fields.
+ */
+ __le32 it_present; /* A bitmap telling which
+ * fields are present. Set bit 31
+ * (0x80000000) to extend the
+ * bitmap by another 32 bits.
+ * Additional extensions are made
+ * by setting bit 31.
+ */
+};
+
+/* Name Data type Units
+ * ---- --------- -----
+ *
+ * IEEE80211_RADIOTAP_TSFT __le64 microseconds
+ *
+ * Value in microseconds of the MAC's 64-bit 802.11 Time
+ * Synchronization Function timer when the first bit of the
+ * MPDU arrived at the MAC. For received frames, only.
+ *
+ * IEEE80211_RADIOTAP_CHANNEL 2 x __le16 MHz, bitmap
+ *
+ * Tx/Rx frequency in MHz, followed by flags (see below).
+ *
+ * IEEE80211_RADIOTAP_FHSS __le16 see below
+ *
+ * For frequency-hopping radios, the hop set (first byte)
+ * and pattern (second byte).
+ *
+ * IEEE80211_RADIOTAP_RATE u8 500kb/s
+ *
+ * Tx/Rx data rate
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTSIGNAL s8 decibels from
+ * one milliwatt (dBm)
+ *
+ * RF signal power at the antenna, decibel difference from
+ * one milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTNOISE s8 decibels from
+ * one milliwatt (dBm)
+ *
+ * RF noise power at the antenna, decibel difference from one
+ * milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB)
+ *
+ * RF signal power at the antenna, decibel difference from an
+ * arbitrary, fixed reference.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB)
+ *
+ * RF noise power at the antenna, decibel difference from an
+ * arbitrary, fixed reference point.
+ *
+ * IEEE80211_RADIOTAP_LOCK_QUALITY __le16 unitless
+ *
+ * Quality of Barker code lock. Unitless. Monotonically
+ * nondecreasing with "better" lock strength. Called "Signal
+ * Quality" in datasheets. (Is there a standard way to measure
+ * this?)
+ *
+ * IEEE80211_RADIOTAP_TX_ATTENUATION __le16 unitless
+ *
+ * Transmit power expressed as unitless distance from max
+ * power set at factory calibration. 0 is max power.
+ * Monotonically nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16 decibels (dB)
+ *
+ * Transmit power expressed as decibel distance from max power
+ * set at factory calibration. 0 is max power. Monotonically
+ * nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DBM_TX_POWER s8 decibels from
+ * one milliwatt (dBm)
+ *
+ * Transmit power expressed as dBm (decibels from a 1 milliwatt
+ * reference). This is the absolute power level measured at
+ * the antenna port.
+ *
+ * IEEE80211_RADIOTAP_FLAGS u8 bitmap
+ *
+ * Properties of transmitted and received frames. See flags
+ * defined below.
+ *
+ * IEEE80211_RADIOTAP_ANTENNA u8 antenna index
+ *
+ * Unitless indication of the Rx/Tx antenna for this packet.
+ * The first antenna is antenna 0.
+ *
+ * IEEE80211_RADIOTAP_RX_FLAGS __le16 bitmap
+ *
+ * Properties of received frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_TX_FLAGS __le16 bitmap
+ *
+ * Properties of transmitted frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_RTS_RETRIES u8 data
+ *
+ * Number of rts retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_DATA_RETRIES u8 data
+ *
+ * Number of unicast retries a transmitted frame used.
+ *
+ */
+enum ieee80211_radiotap_type {
+ IEEE80211_RADIOTAP_TSFT = 0,
+ IEEE80211_RADIOTAP_FLAGS = 1,
+ IEEE80211_RADIOTAP_RATE = 2,
+ IEEE80211_RADIOTAP_CHANNEL = 3,
+ IEEE80211_RADIOTAP_FHSS = 4,
+ IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
+ IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
+ IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
+ IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
+ IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
+ IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
+ IEEE80211_RADIOTAP_ANTENNA = 11,
+ IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
+ IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
+ IEEE80211_RADIOTAP_RX_FLAGS = 14,
+ IEEE80211_RADIOTAP_TX_FLAGS = 15,
+ IEEE80211_RADIOTAP_RTS_RETRIES = 16,
+ IEEE80211_RADIOTAP_DATA_RETRIES = 17,
+ IEEE80211_RADIOTAP_EXT = 31
+};
+
+/* Channel flags. */
+#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */
+#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */
+#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */
+#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */
+#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */
+#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */
+#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */
+#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */
+
+/* For IEEE80211_RADIOTAP_FLAGS */
+#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received
+ * during CFP
+ */
+#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received
+ * with short
+ * preamble
+ */
+#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received
+ * with WEP encryption
+ */
+#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received
+ * with fragmentation
+ */
+#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */
+#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between
+ * 802.11 header and payload
+ * (to 32-bit boundary)
+ */
+/* For IEEE80211_RADIOTAP_RX_FLAGS */
+#define IEEE80211_RADIOTAP_F_RX_BADFCS 0x0001 /* frame failed crc check */
+
+/* For IEEE80211_RADIOTAP_TX_FLAGS */
+#define IEEE80211_RADIOTAP_F_TX_FAIL 0x0001 /* failed due to excessive
+ * retries */
+#define IEEE80211_RADIOTAP_F_TX_CTS 0x0002 /* used cts 'protection' */
+#define IEEE80211_RADIOTAP_F_TX_RTS 0x0004 /* used rts/cts handshake */
+
+/* Ugly macro to convert literal channel numbers into their mhz equivalents
+ * There are certianly some conditions that will break this (like feeding it '30')
+ * but they shouldn't arise since nothing talks on channel 30. */
+#define ieee80211chan2mhz(x) \
+ (((x) <= 14) ? \
+ (((x) == 14) ? 2484 : ((x) * 5) + 2407) : \
+ ((x) + 1000) * 5)
+
+/* helpers */
+static inline int ieee80211_get_radiotap_len(unsigned char *data)
+{
+ struct ieee80211_radiotap_header *hdr =
+ (struct ieee80211_radiotap_header *)data;
+
+ return le16_to_cpu(get_unaligned(&hdr->it_len));
+}
+
+#endif /* IEEE80211_RADIOTAP_H */
diff --git a/package/mac80211/src/include/net/mac80211.h b/package/mac80211/src/include/net/mac80211.h
new file mode 100644
index 0000000000..2b1bffbf5e
--- /dev/null
+++ b/package/mac80211/src/include/net/mac80211.h
@@ -0,0 +1,1429 @@
+/*
+ * mac80211 <-> driver interface
+ *
+ * Copyright 2002-2005, Devicescape Software, Inc.
+ * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MAC80211_H
+#define MAC80211_H
+
+#include <linux/kernel.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/wireless.h>
+#include <linux/device.h>
+#include <linux/ieee80211.h>
+#include <net/wireless.h>
+#include <net/cfg80211.h>
+
+/**
+ * DOC: Introduction
+ *
+ * mac80211 is the Linux stack for 802.11 hardware that implements
+ * only partial functionality in hard- or firmware. This document
+ * defines the interface between mac80211 and low-level hardware
+ * drivers.
+ */
+
+/**
+ * DOC: Calling mac80211 from interrupts
+ *
+ * Only ieee80211_tx_status_irqsafe() and ieee80211_rx_irqsafe() can be
+ * called in hardware interrupt context. The low-level driver must not call any
+ * other functions in hardware interrupt context. If there is a need for such
+ * call, the low-level driver should first ACK the interrupt and perform the
+ * IEEE 802.11 code call after this, e.g. from a scheduled workqueue function.
+ */
+
+/**
+ * DOC: Warning
+ *
+ * If you're reading this document and not the header file itself, it will
+ * be incomplete because not all documentation has been converted yet.
+ */
+
+/**
+ * DOC: Frame format
+ *
+ * As a general rule, when frames are passed between mac80211 and the driver,
+ * they start with the IEEE 802.11 header and include the same octets that are
+ * sent over the air except for the FCS which should be calculated by the
+ * hardware.
+ *
+ * There are, however, various exceptions to this rule for advanced features:
+ *
+ * The first exception is for hardware encryption and decryption offload
+ * where the IV/ICV may or may not be generated in hardware.
+ *
+ * Secondly, when the hardware handles fragmentation, the frame handed to
+ * the driver from mac80211 is the MSDU, not the MPDU.
+ *
+ * Finally, for received frames, the driver is able to indicate that it has
+ * filled a radiotap header and put that in front of the frame; if it does
+ * not do so then mac80211 may add this under certain circumstances.
+ */
+
+#define IEEE80211_CHAN_W_SCAN 0x00000001
+#define IEEE80211_CHAN_W_ACTIVE_SCAN 0x00000002
+#define IEEE80211_CHAN_W_IBSS 0x00000004
+
+/* Channel information structure. Low-level driver is expected to fill in chan,
+ * freq, and val fields. Other fields will be filled in by 80211.o based on
+ * hostapd information and low-level driver does not need to use them. The
+ * limits for each channel will be provided in 'struct ieee80211_conf' when
+ * configuring the low-level driver with hw->config callback. If a device has
+ * a default regulatory domain, IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED
+ * can be set to let the driver configure all fields */
+struct ieee80211_channel {
+ short chan; /* channel number (IEEE 802.11) */
+ short freq; /* frequency in MHz */
+ int val; /* hw specific value for the channel */
+ int flag; /* flag for hostapd use (IEEE80211_CHAN_*) */
+ unsigned char power_level;
+ unsigned char antenna_max;
+};
+
+#define IEEE80211_RATE_ERP 0x00000001
+#define IEEE80211_RATE_BASIC 0x00000002
+#define IEEE80211_RATE_PREAMBLE2 0x00000004
+#define IEEE80211_RATE_SUPPORTED 0x00000010
+#define IEEE80211_RATE_OFDM 0x00000020
+#define IEEE80211_RATE_CCK 0x00000040
+#define IEEE80211_RATE_MANDATORY 0x00000100
+
+#define IEEE80211_RATE_CCK_2 (IEEE80211_RATE_CCK | IEEE80211_RATE_PREAMBLE2)
+#define IEEE80211_RATE_MODULATION(f) \
+ (f & (IEEE80211_RATE_CCK | IEEE80211_RATE_OFDM))
+
+/* Low-level driver should set PREAMBLE2, OFDM and CCK flags.
+ * BASIC, SUPPORTED, ERP, and MANDATORY flags are set in 80211.o based on the
+ * configuration. */
+struct ieee80211_rate {
+ int rate; /* rate in 100 kbps */
+ int val; /* hw specific value for the rate */
+ int flags; /* IEEE80211_RATE_ flags */
+ int val2; /* hw specific value for the rate when using short preamble
+ * (only when IEEE80211_RATE_PREAMBLE2 flag is set, i.e., for
+ * 2, 5.5, and 11 Mbps) */
+ signed char min_rssi_ack;
+ unsigned char min_rssi_ack_delta;
+
+ /* following fields are set by 80211.o and need not be filled by the
+ * low-level driver */
+ int rate_inv; /* inverse of the rate (LCM(all rates) / rate) for
+ * optimizing channel utilization estimates */
+};
+
+/**
+ * enum ieee80211_phymode - PHY modes
+ *
+ * @MODE_IEEE80211A: 5GHz as defined by 802.11a/802.11h
+ * @MODE_IEEE80211B: 2.4 GHz as defined by 802.11b
+ * @MODE_IEEE80211G: 2.4 GHz as defined by 802.11g (with OFDM),
+ * backwards compatible with 11b mode
+ * @NUM_IEEE80211_MODES: internal
+ */
+enum ieee80211_phymode {
+ MODE_IEEE80211A,
+ MODE_IEEE80211B,
+ MODE_IEEE80211G,
+
+ /* keep last */
+ NUM_IEEE80211_MODES
+};
+
+/**
+ * struct ieee80211_hw_mode - PHY mode definition
+ *
+ * This structure describes the capabilities supported by the device
+ * in a single PHY mode.
+ *
+ * @mode: the PHY mode for this definition
+ * @num_channels: number of supported channels
+ * @channels: pointer to array of supported channels
+ * @num_rates: number of supported bitrates
+ * @rates: pointer to array of supported bitrates
+ * @list: internal
+ */
+struct ieee80211_hw_mode {
+ struct list_head list;
+ struct ieee80211_channel *channels;
+ struct ieee80211_rate *rates;
+ enum ieee80211_phymode mode;
+ int num_channels;
+ int num_rates;
+};
+
+/**
+ * struct ieee80211_tx_queue_params - transmit queue configuration
+ *
+ * The information provided in this structure is required for QoS
+ * transmit queue configuration.
+ *
+ * @aifs: arbitration interface space [0..255, -1: use default]
+ * @cw_min: minimum contention window [will be a value of the form
+ * 2^n-1 in the range 1..1023; 0: use default]
+ * @cw_max: maximum contention window [like @cw_min]
+ * @burst_time: maximum burst time in units of 0.1ms, 0 meaning disabled
+ */
+struct ieee80211_tx_queue_params {
+ int aifs;
+ int cw_min;
+ int cw_max;
+ int burst_time;
+};
+
+/**
+ * struct ieee80211_tx_queue_stats_data - transmit queue statistics
+ *
+ * @len: number of packets in queue
+ * @limit: queue length limit
+ * @count: number of frames sent
+ */
+struct ieee80211_tx_queue_stats_data {
+ unsigned int len;
+ unsigned int limit;
+ unsigned int count;
+};
+
+/**
+ * enum ieee80211_tx_queue - transmit queue number
+ *
+ * These constants are used with some callbacks that take a
+ * queue number to set parameters for a queue.
+ *
+ * @IEEE80211_TX_QUEUE_DATA0: data queue 0
+ * @IEEE80211_TX_QUEUE_DATA1: data queue 1
+ * @IEEE80211_TX_QUEUE_DATA2: data queue 2
+ * @IEEE80211_TX_QUEUE_DATA3: data queue 3
+ * @IEEE80211_TX_QUEUE_DATA4: data queue 4
+ * @IEEE80211_TX_QUEUE_SVP: ??
+ * @NUM_TX_DATA_QUEUES: number of data queues
+ * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be
+ * sent after a beacon
+ * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames
+ */
+enum ieee80211_tx_queue {
+ IEEE80211_TX_QUEUE_DATA0,
+ IEEE80211_TX_QUEUE_DATA1,
+ IEEE80211_TX_QUEUE_DATA2,
+ IEEE80211_TX_QUEUE_DATA3,
+ IEEE80211_TX_QUEUE_DATA4,
+ IEEE80211_TX_QUEUE_SVP,
+
+ NUM_TX_DATA_QUEUES,
+
+/* due to stupidity in the sub-ioctl userspace interface, the items in
+ * this struct need to have fixed values. As soon as it is removed, we can
+ * fix these entries. */
+ IEEE80211_TX_QUEUE_AFTER_BEACON = 6,
+ IEEE80211_TX_QUEUE_BEACON = 7
+};
+
+struct ieee80211_tx_queue_stats {
+ struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES];
+};
+
+struct ieee80211_low_level_stats {
+ unsigned int dot11ACKFailureCount;
+ unsigned int dot11RTSFailureCount;
+ unsigned int dot11FCSErrorCount;
+ unsigned int dot11RTSSuccessCount;
+};
+
+/* Transmit control fields. This data structure is passed to low-level driver
+ * with each TX frame. The low-level driver is responsible for configuring
+ * the hardware to use given values (depending on what is supported). */
+
+struct ieee80211_tx_control {
+ int tx_rate; /* Transmit rate, given as the hw specific value for the
+ * rate (from struct ieee80211_rate) */
+ int rts_cts_rate; /* Transmit rate for RTS/CTS frame, given as the hw
+ * specific value for the rate (from
+ * struct ieee80211_rate) */
+
+#define IEEE80211_TXCTL_REQ_TX_STATUS (1<<0)/* request TX status callback for
+ * this frame */
+#define IEEE80211_TXCTL_DO_NOT_ENCRYPT (1<<1) /* send this frame without
+ * encryption; e.g., for EAPOL
+ * frames */
+#define IEEE80211_TXCTL_USE_RTS_CTS (1<<2) /* use RTS-CTS before sending
+ * frame */
+#define IEEE80211_TXCTL_USE_CTS_PROTECT (1<<3) /* use CTS protection for the
+ * frame (e.g., for combined
+ * 802.11g / 802.11b networks) */
+#define IEEE80211_TXCTL_NO_ACK (1<<4) /* tell the low level not to
+ * wait for an ack */
+#define IEEE80211_TXCTL_RATE_CTRL_PROBE (1<<5)
+#define IEEE80211_TXCTL_CLEAR_DST_MASK (1<<6)
+#define IEEE80211_TXCTL_REQUEUE (1<<7)
+#define IEEE80211_TXCTL_FIRST_FRAGMENT (1<<8) /* this is a first fragment of
+ * the frame */
+#define IEEE80211_TXCTL_LONG_RETRY_LIMIT (1<<10) /* this frame should be send
+ * using the through
+ * set_retry_limit configured
+ * long retry value */
+ u32 flags; /* tx control flags defined
+ * above */
+ u8 key_idx; /* keyidx from hw->set_key(), undefined if
+ * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */
+ u8 retry_limit; /* 1 = only first attempt, 2 = one retry, ..
+ * This could be used when set_retry_limit
+ * is not implemented by the driver */
+ u8 power_level; /* per-packet transmit power level, in dBm */
+ u8 antenna_sel_tx; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
+ u8 icv_len; /* length of the ICV/MIC field in octets */
+ u8 iv_len; /* length of the IV field in octets */
+ u8 queue; /* hardware queue to use for this frame;
+ * 0 = highest, hw->queues-1 = lowest */
+ struct ieee80211_rate *rate; /* internal 80211.o rate */
+ struct ieee80211_rate *rts_rate; /* internal 80211.o rate
+ * for RTS/CTS */
+ int alt_retry_rate; /* retry rate for the last retries, given as the
+ * hw specific value for the rate (from
+ * struct ieee80211_rate). To be used to limit
+ * packet dropping when probing higher rates, if hw
+ * supports multiple retry rates. -1 = not used */
+ int type; /* internal */
+ int ifindex; /* internal */
+};
+
+
+/**
+ * enum mac80211_rx_flags - receive flags
+ *
+ * These flags are used with the @flag member of &struct ieee80211_rx_status.
+ * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame.
+ * Use together with %RX_FLAG_MMIC_STRIPPED.
+ * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
+ * @RX_FLAG_RADIOTAP: This frame starts with a radiotap header.
+ * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame,
+ * verification has been done by the hardware.
+ * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
+ * If this flag is set, the stack cannot do any replay detection
+ * hence the driver or hardware will have to do that.
+ * @RX_FLAG_FAILED_FCS_CRC: Set this flag if the FCS check failed on
+ * the frame.
+ * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
+ * the frame.
+ */
+enum mac80211_rx_flags {
+ RX_FLAG_MMIC_ERROR = 1<<0,
+ RX_FLAG_DECRYPTED = 1<<1,
+ RX_FLAG_RADIOTAP = 1<<2,
+ RX_FLAG_MMIC_STRIPPED = 1<<3,
+ RX_FLAG_IV_STRIPPED = 1<<4,
+ RX_FLAG_FAILED_FCS_CRC = 1<<5,
+ RX_FLAG_FAILED_PLCP_CRC = 1<<6,
+};
+
+/**
+ * struct ieee80211_rx_status - receive status
+ *
+ * The low-level driver should provide this information (the subset
+ * supported by hardware) to the 802.11 code with each received
+ * frame.
+ * @mactime: MAC timestamp as defined by 802.11
+ * @freq: frequency the radio was tuned to when receiving this frame, in MHz
+ * @channel: channel the radio was tuned to
+ * @phymode: active PHY mode
+ * @ssi: signal strength when receiving this frame
+ * @signal: used as 'qual' in statistics reporting
+ * @noise: PHY noise when receiving this frame
+ * @antenna: antenna used
+ * @rate: data rate
+ * @flag: %RX_FLAG_*
+ */
+struct ieee80211_rx_status {
+ u64 mactime;
+ int freq;
+ int channel;
+ enum ieee80211_phymode phymode;
+ int ssi;
+ int signal;
+ int noise;
+ int antenna;
+ int rate;
+ int flag;
+};
+
+/**
+ * enum ieee80211_tx_status_flags - transmit status flags
+ *
+ * Status flags to indicate various transmit conditions.
+ *
+ * @IEEE80211_TX_STATUS_TX_FILTERED: The frame was not transmitted
+ * because the destination STA was in powersave mode.
+ *
+ * @IEEE80211_TX_STATUS_ACK: Frame was acknowledged
+ */
+enum ieee80211_tx_status_flags {
+ IEEE80211_TX_STATUS_TX_FILTERED = 1<<0,
+ IEEE80211_TX_STATUS_ACK = 1<<1,
+};
+
+/**
+ * struct ieee80211_tx_status - transmit status
+ *
+ * As much information as possible should be provided for each transmitted
+ * frame with ieee80211_tx_status().
+ *
+ * @control: a copy of the &struct ieee80211_tx_control passed to the driver
+ * in the tx() callback.
+ *
+ * @flags: transmit status flags, defined above
+ *
+ * @ack_signal: signal strength of the ACK frame
+ *
+ * @excessive_retries: set to 1 if the frame was retried many times
+ * but not acknowledged
+ *
+ * @retry_count: number of retries
+ *
+ * @queue_length: ?? REMOVE
+ * @queue_number: ?? REMOVE
+ */
+struct ieee80211_tx_status {
+ struct ieee80211_tx_control control;
+ u8 flags;
+ bool excessive_retries;
+ u8 retry_count;
+ int ack_signal;
+ int queue_length;
+ int queue_number;
+};
+
+/**
+ * enum ieee80211_conf_flags - configuration flags
+ *
+ * Flags to define PHY configuration options
+ *
+ * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time
+ * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
+ *
+ */
+enum ieee80211_conf_flags {
+ IEEE80211_CONF_SHORT_SLOT_TIME = 1<<0,
+ IEEE80211_CONF_RADIOTAP = 1<<1,
+};
+
+/**
+ * struct ieee80211_conf - configuration of the device
+ *
+ * This struct indicates how the driver shall configure the hardware.
+ *
+ * @radio_enabled: when zero, driver is required to switch off the radio.
+ * TODO make a flag
+ * @channel: IEEE 802.11 channel number
+ * @freq: frequency in MHz
+ * @channel_val: hardware specific channel value for the channel
+ * @phymode: PHY mode to activate (REMOVE)
+ * @chan: channel to switch to, pointer to the channel information
+ * @mode: pointer to mode definition
+ * @regulatory_domain: ??
+ * @beacon_int: beacon interval (TODO make interface config)
+ * @flags: configuration flags defined above
+ * @power_level: transmit power limit for current regulatory domain in dBm
+ * @antenna_max: maximum antenna gain
+ * @antenna_sel_tx: transmit antenna selection, 0: default/diversity,
+ * 1/2: antenna 0/1
+ * @antenna_sel_rx: receive antenna selection, like @antenna_sel_tx
+ */
+struct ieee80211_conf {
+ int channel; /* IEEE 802.11 channel number */
+ int freq; /* MHz */
+ int channel_val; /* hw specific value for the channel */
+
+ enum ieee80211_phymode phymode;
+ struct ieee80211_channel *chan;
+ struct ieee80211_hw_mode *mode;
+ unsigned int regulatory_domain;
+ int radio_enabled;
+
+ int beacon_int;
+ u32 flags;
+ u8 power_level;
+ u8 antenna_max;
+ u8 antenna_sel_tx;
+ u8 antenna_sel_rx;
+};
+
+/**
+ * enum ieee80211_if_types - types of 802.11 network interfaces
+ *
+ * @IEEE80211_IF_TYPE_INVALID: invalid interface type, not used
+ * by mac80211 itself
+ * @IEEE80211_IF_TYPE_AP: interface in AP mode.
+ * @IEEE80211_IF_TYPE_MGMT: special interface for communication with hostap
+ * daemon. Drivers should never see this type.
+ * @IEEE80211_IF_TYPE_STA: interface in STA (client) mode.
+ * @IEEE80211_IF_TYPE_IBSS: interface in IBSS (ad-hoc) mode.
+ * @IEEE80211_IF_TYPE_MNTR: interface in monitor (rfmon) mode.
+ * @IEEE80211_IF_TYPE_WDS: interface in WDS mode.
+ * @IEEE80211_IF_TYPE_VLAN: VLAN interface bound to an AP, drivers
+ * will never see this type.
+ */
+enum ieee80211_if_types {
+ IEEE80211_IF_TYPE_INVALID,
+ IEEE80211_IF_TYPE_AP,
+ IEEE80211_IF_TYPE_STA,
+ IEEE80211_IF_TYPE_IBSS,
+ IEEE80211_IF_TYPE_MNTR,
+ IEEE80211_IF_TYPE_WDS,
+ IEEE80211_IF_TYPE_VLAN,
+};
+
+/**
+ * struct ieee80211_if_init_conf - initial configuration of an interface
+ *
+ * @if_id: internal interface ID. This number has no particular meaning to
+ * drivers and the only allowed usage is to pass it to
+ * ieee80211_beacon_get() and ieee80211_get_buffered_bc() functions.
+ * This field is not valid for monitor interfaces
+ * (interfaces of %IEEE80211_IF_TYPE_MNTR type).
+ * @type: one of &enum ieee80211_if_types constants. Determines the type of
+ * added/removed interface.
+ * @mac_addr: pointer to MAC address of the interface. This pointer is valid
+ * until the interface is removed (i.e. it cannot be used after
+ * remove_interface() callback was called for this interface).
+ *
+ * This structure is used in add_interface() and remove_interface()
+ * callbacks of &struct ieee80211_hw.
+ *
+ * When you allow multiple interfaces to be added to your PHY, take care
+ * that the hardware can actually handle multiple MAC addresses. However,
+ * also take care that when there's no interface left with mac_addr != %NULL
+ * you remove the MAC address from the device to avoid acknowledging packets
+ * in pure monitor mode.
+ */
+struct ieee80211_if_init_conf {
+ int if_id;
+ enum ieee80211_if_types type;
+ void *mac_addr;
+};
+
+/**
+ * struct ieee80211_if_conf - configuration of an interface
+ *
+ * @type: type of the interface. This is always the same as was specified in
+ * &struct ieee80211_if_init_conf. The type of an interface never changes
+ * during the life of the interface; this field is present only for
+ * convenience.
+ * @bssid: BSSID of the network we are associated to/creating.
+ * @ssid: used (together with @ssid_len) by drivers for hardware that
+ * generate beacons independently. The pointer is valid only during the
+ * config_interface() call, so copy the value somewhere if you need
+ * it.
+ * @ssid_len: length of the @ssid field.
+ * @beacon: beacon template. Valid only if @host_gen_beacon_template in
+ * &struct ieee80211_hw is set. The driver is responsible of freeing
+ * the sk_buff.
+ * @beacon_control: tx_control for the beacon template, this field is only
+ * valid when the @beacon field was set.
+ *
+ * This structure is passed to the config_interface() callback of
+ * &struct ieee80211_hw.
+ */
+struct ieee80211_if_conf {
+ int type;
+ u8 *bssid;
+ u8 *ssid;
+ size_t ssid_len;
+ struct sk_buff *beacon;
+ struct ieee80211_tx_control *beacon_control;
+};
+
+/**
+ * enum ieee80211_key_alg - key algorithm
+ * @ALG_WEP: WEP40 or WEP104
+ * @ALG_TKIP: TKIP
+ * @ALG_CCMP: CCMP (AES)
+ */
+enum ieee80211_key_alg {
+ ALG_WEP,
+ ALG_TKIP,
+ ALG_CCMP,
+};
+
+
+/**
+ * enum ieee80211_key_flags - key flags
+ *
+ * These flags are used for communication about keys between the driver
+ * and mac80211, with the @flags parameter of &struct ieee80211_key_conf.
+ *
+ * @IEEE80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates
+ * that the STA this key will be used with could be using QoS.
+ * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
+ * driver to indicate that it requires IV generation for this
+ * particular key.
+ * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
+ * the driver for a TKIP key if it requires Michael MIC
+ * generation in software.
+ */
+enum ieee80211_key_flags {
+ IEEE80211_KEY_FLAG_WMM_STA = 1<<0,
+ IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1,
+ IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
+};
+
+/**
+ * struct ieee80211_key_conf - key information
+ *
+ * This key information is given by mac80211 to the driver by
+ * the set_key() callback in &struct ieee80211_ops.
+ *
+ * @hw_key_idx: To be set by the driver, this is the key index the driver
+ * wants to be given when a frame is transmitted and needs to be
+ * encrypted in hardware.
+ * @alg: The key algorithm.
+ * @flags: key flags, see &enum ieee80211_key_flags.
+ * @keyidx: the key index (0-3)
+ * @keylen: key material length
+ * @key: key material
+ */
+struct ieee80211_key_conf {
+ enum ieee80211_key_alg alg;
+ u8 hw_key_idx;
+ u8 flags;
+ s8 keyidx;
+ u8 keylen;
+ u8 key[0];
+};
+
+#define IEEE80211_SEQ_COUNTER_RX 0
+#define IEEE80211_SEQ_COUNTER_TX 1
+
+/**
+ * enum set_key_cmd - key command
+ *
+ * Used with the set_key() callback in &struct ieee80211_ops, this
+ * indicates whether a key is being removed or added.
+ *
+ * @SET_KEY: a key is set
+ * @DISABLE_KEY: a key must be disabled
+ */
+enum set_key_cmd {
+ SET_KEY, DISABLE_KEY,
+};
+
+/**
+ * enum sta_notify_cmd - sta notify command
+ *
+ * Used with the sta_notify() callback in &struct ieee80211_ops, this
+ * indicates addition and removal of a station to station table
+ *
+ * @STA_NOTIFY_ADD: a station was added to the station table
+ * @STA_NOTIFY_REMOVE: a station being removed from the station table
+ */
+enum sta_notify_cmd {
+ STA_NOTIFY_ADD, STA_NOTIFY_REMOVE
+};
+
+/**
+ * enum ieee80211_hw_flags - hardware flags
+ *
+ * These flags are used to indicate hardware capabilities to
+ * the stack. Generally, flags here should have their meaning
+ * done in a way that the simplest hardware doesn't need setting
+ * any particular flags. There are some exceptions to this rule,
+ * however, so you are advised to review these flags carefully.
+ *
+ * @IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE:
+ * The device only needs to be supplied with a beacon template.
+ * If you need the host to generate each beacon then don't use
+ * this flag and call ieee80211_beacon_get() when you need the
+ * next beacon frame. Note that if you set this flag, you must
+ * implement the set_tim() callback for powersave mode to work
+ * properly.
+ * This flag is only relevant for access-point mode.
+ *
+ * @IEEE80211_HW_RX_INCLUDES_FCS:
+ * Indicates that received frames passed to the stack include
+ * the FCS at the end.
+ *
+ * @IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING:
+ * Some wireless LAN chipsets buffer broadcast/multicast frames
+ * for power saving stations in the hardware/firmware and others
+ * rely on the host system for such buffering. This option is used
+ * to configure the IEEE 802.11 upper layer to buffer broadcast and
+ * multicast frames when there are power saving stations so that
+ * the driver can fetch them with ieee80211_get_buffered_bc(). Note
+ * that not setting this flag works properly only when the
+ * %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is also not set because
+ * otherwise the stack will not know when the DTIM beacon was sent.
+ *
+ * @IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED:
+ * Channels are already configured to the default regulatory domain
+ * specified in the device's EEPROM
+ */
+enum ieee80211_hw_flags {
+ IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0,
+ IEEE80211_HW_RX_INCLUDES_FCS = 1<<1,
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2,
+ IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED = 1<<3,
+};
+
+/**
+ * struct ieee80211_hw - hardware information and state
+ *
+ * This structure contains the configuration and hardware
+ * information for an 802.11 PHY.
+ *
+ * @wiphy: This points to the &struct wiphy allocated for this
+ * 802.11 PHY. You must fill in the @perm_addr and @dev
+ * members of this structure using SET_IEEE80211_DEV()
+ * and SET_IEEE80211_PERM_ADDR().
+ *
+ * @conf: &struct ieee80211_conf, device configuration, don't use.
+ *
+ * @workqueue: single threaded workqueue available for driver use,
+ * allocated by mac80211 on registration and flushed on
+ * unregistration.
+ *
+ * @priv: pointer to private area that was allocated for driver use
+ * along with this structure.
+ *
+ * @flags: hardware flags, see &enum ieee80211_hw_flags.
+ *
+ * @extra_tx_headroom: headroom to reserve in each transmit skb
+ * for use by the driver (e.g. for transmit headers.)
+ *
+ * @channel_change_time: time (in microseconds) it takes to change channels.
+ *
+ * @max_rssi: Maximum value for ssi in RX information, use
+ * negative numbers for dBm and 0 to indicate no support.
+ *
+ * @max_signal: like @max_rssi, but for the signal value.
+ *
+ * @max_noise: like @max_rssi, but for the noise value.
+ *
+ * @queues: number of available hardware transmit queues for
+ * data packets. WMM/QoS requires at least four.
+ */
+struct ieee80211_hw {
+ struct ieee80211_conf conf;
+ struct wiphy *wiphy;
+ struct workqueue_struct *workqueue;
+ void *priv;
+ u32 flags;
+ unsigned int extra_tx_headroom;
+ int channel_change_time;
+ u8 queues;
+ s8 max_rssi;
+ s8 max_signal;
+ s8 max_noise;
+};
+
+/**
+ * SET_IEEE80211_DEV - set device for 802.11 hardware
+ *
+ * @hw: the &struct ieee80211_hw to set the device for
+ * @dev: the &struct device of this 802.11 device
+ */
+static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev)
+{
+ set_wiphy_dev(hw->wiphy, dev);
+}
+
+/**
+ * SET_IEEE80211_PERM_ADDR - set the permanenet MAC address for 802.11 hardware
+ *
+ * @hw: the &struct ieee80211_hw to set the MAC address for
+ * @addr: the address to set
+ */
+static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr)
+{
+ memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN);
+}
+
+/**
+ * DOC: Hardware crypto acceleration
+ *
+ * mac80211 is capable of taking advantage of many hardware
+ * acceleration designs for encryption and decryption operations.
+ *
+ * The set_key() callback in the &struct ieee80211_ops for a given
+ * device is called to enable hardware acceleration of encryption and
+ * decryption. The callback takes an @address parameter that will be
+ * the broadcast address for default keys, the other station's hardware
+ * address for individual keys or the zero address for keys that will
+ * be used only for transmission.
+ * Multiple transmission keys with the same key index may be used when
+ * VLANs are configured for an access point.
+ *
+ * The @local_address parameter will always be set to our own address,
+ * this is only relevant if you support multiple local addresses.
+ *
+ * When transmitting, the TX control data will use the @hw_key_idx
+ * selected by the driver by modifying the &struct ieee80211_key_conf
+ * pointed to by the @key parameter to the set_key() function.
+ *
+ * The set_key() call for the %SET_KEY command should return 0 if
+ * the key is now in use, -%EOPNOTSUPP or -%ENOSPC if it couldn't be
+ * added; if you return 0 then hw_key_idx must be assigned to the
+ * hardware key index, you are free to use the full u8 range.
+ *
+ * When the cmd is %DISABLE_KEY then it must succeed.
+ *
+ * Note that it is permissible to not decrypt a frame even if a key
+ * for it has been uploaded to hardware, the stack will not make any
+ * decision based on whether a key has been uploaded or not but rather
+ * based on the receive flags.
+ *
+ * The &struct ieee80211_key_conf structure pointed to by the @key
+ * parameter is guaranteed to be valid until another call to set_key()
+ * removes it, but it can only be used as a cookie to differentiate
+ * keys.
+ */
+
+/**
+ * DOC: Frame filtering
+ *
+ * mac80211 requires to see many management frames for proper
+ * operation, and users may want to see many more frames when
+ * in monitor mode. However, for best CPU usage and power consumption,
+ * having as few frames as possible percolate through the stack is
+ * desirable. Hence, the hardware should filter as much as possible.
+ *
+ * To achieve this, mac80211 uses filter flags (see below) to tell
+ * the driver's configure_filter() function which frames should be
+ * passed to mac80211 and which should be filtered out.
+ *
+ * The configure_filter() callback is invoked with the parameters
+ * @mc_count and @mc_list for the combined multicast address list
+ * of all virtual interfaces, @changed_flags telling which flags
+ * were changed and @total_flags with the new flag states.
+ *
+ * If your device has no multicast address filters your driver will
+ * need to check both the %FIF_ALLMULTI flag and the @mc_count
+ * parameter to see whether multicast frames should be accepted
+ * or dropped.
+ *
+ * All unsupported flags in @total_flags must be cleared, i.e. you
+ * should clear all bits except those you honoured.
+ */
+
+/**
+ * enum ieee80211_filter_flags - hardware filter flags
+ *
+ * These flags determine what the filter in hardware should be
+ * programmed to let through and what should not be passed to the
+ * stack. It is always safe to pass more frames than requested,
+ * but this has negative impact on power consumption.
+ *
+ * @FIF_PROMISC_IN_BSS: promiscuous mode within your BSS,
+ * think of the BSS as your network segment and then this corresponds
+ * to the regular ethernet device promiscuous mode.
+ *
+ * @FIF_ALLMULTI: pass all multicast frames, this is used if requested
+ * by the user or if the hardware is not capable of filtering by
+ * multicast address.
+ *
+ * @FIF_FCSFAIL: pass frames with failed FCS (but you need to set the
+ * %RX_FLAG_FAILED_FCS_CRC for them)
+ *
+ * @FIF_PLCPFAIL: pass frames with failed PLCP CRC (but you need to set
+ * the %RX_FLAG_FAILED_PLCP_CRC for them
+ *
+ * @FIF_BCN_PRBRESP_PROMISC: This flag is set during scanning to indicate
+ * to the hardware that it should not filter beacons or probe responses
+ * by BSSID. Filtering them can greatly reduce the amount of processing
+ * mac80211 needs to do and the amount of CPU wakeups, so you should
+ * honour this flag if possible.
+ *
+ * @FIF_CONTROL: pass control frames, if PROMISC_IN_BSS is not set then
+ * only those addressed to this station
+ *
+ * @FIF_OTHER_BSS: pass frames destined to other BSSes
+ */
+enum ieee80211_filter_flags {
+ FIF_PROMISC_IN_BSS = 1<<0,
+ FIF_ALLMULTI = 1<<1,
+ FIF_FCSFAIL = 1<<2,
+ FIF_PLCPFAIL = 1<<3,
+ FIF_BCN_PRBRESP_PROMISC = 1<<4,
+ FIF_CONTROL = 1<<5,
+ FIF_OTHER_BSS = 1<<6,
+};
+
+/**
+ * enum ieee80211_erp_change_flags - erp change flags
+ *
+ * These flags are used with the erp_ie_changed() callback in
+ * &struct ieee80211_ops to indicate which parameter(s) changed.
+ * @IEEE80211_ERP_CHANGE_PROTECTION: protection changed
+ * @IEEE80211_ERP_CHANGE_PREAMBLE: barker preamble mode changed
+ */
+enum ieee80211_erp_change_flags {
+ IEEE80211_ERP_CHANGE_PROTECTION = 1<<0,
+ IEEE80211_ERP_CHANGE_PREAMBLE = 1<<1,
+};
+
+
+/**
+ * struct ieee80211_ops - callbacks from mac80211 to the driver
+ *
+ * This structure contains various callbacks that the driver may
+ * handle or, in some cases, must handle, for example to configure
+ * the hardware to a new channel or to transmit a frame.
+ *
+ * @tx: Handler that 802.11 module calls for each transmitted frame.
+ * skb contains the buffer starting from the IEEE 802.11 header.
+ * The low-level driver should send the frame out based on
+ * configuration in the TX control data. Must be implemented and
+ * atomic.
+ *
+ * @start: Called before the first netdevice attached to the hardware
+ * is enabled. This should turn on the hardware and must turn on
+ * frame reception (for possibly enabled monitor interfaces.)
+ * Returns negative error codes, these may be seen in userspace,
+ * or zero.
+ * When the device is started it should not have a MAC address
+ * to avoid acknowledging frames before a non-monitor device
+ * is added.
+ * Must be implemented.
+ *
+ * @stop: Called after last netdevice attached to the hardware
+ * is disabled. This should turn off the hardware (at least
+ * it must turn off frame reception.)
+ * May be called right after add_interface if that rejects
+ * an interface.
+ * Must be implemented.
+ *
+ * @add_interface: Called when a netdevice attached to the hardware is
+ * enabled. Because it is not called for monitor mode devices, @open
+ * and @stop must be implemented.
+ * The driver should perform any initialization it needs before
+ * the device can be enabled. The initial configuration for the
+ * interface is given in the conf parameter.
+ * The callback may refuse to add an interface by returning a
+ * negative error code (which will be seen in userspace.)
+ * Must be implemented.
+ *
+ * @remove_interface: Notifies a driver that an interface is going down.
+ * The @stop callback is called after this if it is the last interface
+ * and no monitor interfaces are present.
+ * When all interfaces are removed, the MAC address in the hardware
+ * must be cleared so the device no longer acknowledges packets,
+ * the mac_addr member of the conf structure is, however, set to the
+ * MAC address of the device going away.
+ * Hence, this callback must be implemented.
+ *
+ * @config: Handler for configuration requests. IEEE 802.11 code calls this
+ * function to change hardware configuration, e.g., channel.
+ *
+ * @config_interface: Handler for configuration requests related to interfaces
+ * (e.g. BSSID changes.)
+ *
+ * @configure_filter: Configure the device's RX filter.
+ * See the section "Frame filtering" for more information.
+ * This callback must be implemented and atomic.
+ *
+ * @set_tim: Set TIM bit. If the hardware/firmware takes care of beacon
+ * generation (that is, %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is set)
+ * mac80211 calls this function when a TIM bit must be set or cleared
+ * for a given AID. Must be atomic.
+ *
+ * @set_key: See the section "Hardware crypto acceleration"
+ * This callback can sleep, and is only called between add_interface
+ * and remove_interface calls, i.e. while the interface with the
+ * given local_address is enabled.
+ *
+ * @set_ieee8021x: Enable/disable IEEE 802.1X. This item requests wlan card
+ * to pass unencrypted EAPOL-Key frames even when encryption is
+ * configured. If the wlan card does not require such a configuration,
+ * this function pointer can be set to NULL.
+ *
+ * @set_port_auth: Set port authorization state (IEEE 802.1X PAE) to be
+ * authorized (@authorized=1) or unauthorized (=0). This function can be
+ * used if the wlan hardware or low-level driver implements PAE.
+ * mac80211 will filter frames based on authorization state in any case,
+ * so this function pointer can be NULL if low-level driver does not
+ * require event notification about port state changes.
+ *
+ * @hw_scan: Ask the hardware to service the scan request, no need to start
+ * the scan state machine in stack.
+ *
+ * @get_stats: return low-level statistics
+ *
+ * @set_privacy_invoked: For devices that generate their own beacons and probe
+ * response or association responses this updates the state of privacy_invoked
+ * returns 0 for success or an error number.
+ *
+ * @get_sequence_counter: For devices that have internal sequence counters this
+ * callback allows mac80211 to access the current value of a counter.
+ * This callback seems not well-defined, tell us if you need it.
+ *
+ * @set_rts_threshold: Configuration of RTS threshold (if device needs it)
+ *
+ * @set_frag_threshold: Configuration of fragmentation threshold. Assign this if
+ * the device does fragmentation by itself; if this method is assigned then
+ * the stack will not do fragmentation.
+ *
+ * @set_retry_limit: Configuration of retry limits (if device needs it)
+ *
+ * @sta_notify: Notifies low level driver about addition or removal
+ * of assocaited station or AP.
+ *
+ * @erp_ie_changed: Handle ERP IE change notifications. Must be atomic.
+ *
+ * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
+ * bursting) for a hardware TX queue. The @queue parameter uses the
+ * %IEEE80211_TX_QUEUE_* constants. Must be atomic.
+ *
+ * @get_tx_stats: Get statistics of the current TX queue status. This is used
+ * to get number of currently queued packets (queue length), maximum queue
+ * size (limit), and total number of packets sent using each TX queue
+ * (count). This information is used for WMM to find out which TX
+ * queues have room for more packets and by hostapd to provide
+ * statistics about the current queueing state to external programs.
+ *
+ * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
+ * this is only used for IBSS mode debugging and, as such, is not a
+ * required function. Must be atomic.
+ *
+ * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
+ * with other STAs in the IBSS. This is only used in IBSS mode. This
+ * function is optional if the firmware/hardware takes full care of
+ * TSF synchronization.
+ *
+ * @beacon_update: Setup beacon data for IBSS beacons. Unlike access point,
+ * IBSS uses a fixed beacon frame which is configured using this
+ * function.
+ * If the driver returns success (0) from this callback, it owns
+ * the skb. That means the driver is responsible to kfree_skb() it.
+ * The control structure is not dynamically allocated. That means the
+ * driver does not own the pointer and if it needs it somewhere
+ * outside of the context of this function, it must copy it
+ * somewhere else.
+ * This handler is required only for IBSS mode.
+ *
+ * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
+ * This is needed only for IBSS mode and the result of this function is
+ * used to determine whether to reply to Probe Requests.
+ */
+struct ieee80211_ops {
+ int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ieee80211_tx_control *control);
+ int (*start)(struct ieee80211_hw *hw);
+ void (*stop)(struct ieee80211_hw *hw);
+ int (*add_interface)(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+ void (*remove_interface)(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+ int (*config)(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
+ int (*config_interface)(struct ieee80211_hw *hw,
+ int if_id, struct ieee80211_if_conf *conf);
+ void (*configure_filter)(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count, struct dev_addr_list *mc_list);
+ int (*set_tim)(struct ieee80211_hw *hw, int aid, int set);
+ int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ const u8 *local_address, const u8 *address,
+ struct ieee80211_key_conf *key);
+ int (*set_ieee8021x)(struct ieee80211_hw *hw, int use_ieee8021x);
+ int (*set_port_auth)(struct ieee80211_hw *hw, u8 *addr,
+ int authorized);
+ int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len);
+ int (*get_stats)(struct ieee80211_hw *hw,
+ struct ieee80211_low_level_stats *stats);
+ int (*set_privacy_invoked)(struct ieee80211_hw *hw,
+ int privacy_invoked);
+ int (*get_sequence_counter)(struct ieee80211_hw *hw,
+ u8* addr, u8 keyidx, u8 txrx,
+ u32* iv32, u16* iv16);
+ int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
+ int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
+ int (*set_retry_limit)(struct ieee80211_hw *hw,
+ u32 short_retry, u32 long_retr);
+ void (*sta_notify)(struct ieee80211_hw *hw, int if_id,
+ enum sta_notify_cmd, const u8 *addr);
+ void (*erp_ie_changed)(struct ieee80211_hw *hw, u8 changes,
+ int cts_protection, int preamble);
+ int (*conf_tx)(struct ieee80211_hw *hw, int queue,
+ const struct ieee80211_tx_queue_params *params);
+ int (*get_tx_stats)(struct ieee80211_hw *hw,
+ struct ieee80211_tx_queue_stats *stats);
+ u64 (*get_tsf)(struct ieee80211_hw *hw);
+ void (*reset_tsf)(struct ieee80211_hw *hw);
+ int (*beacon_update)(struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct ieee80211_tx_control *control);
+ int (*tx_last_beacon)(struct ieee80211_hw *hw);
+};
+
+/**
+ * ieee80211_alloc_hw - Allocate a new hardware device
+ *
+ * This must be called once for each hardware device. The returned pointer
+ * must be used to refer to this device when calling other functions.
+ * mac80211 allocates a private data area for the driver pointed to by
+ * @priv in &struct ieee80211_hw, the size of this area is given as
+ * @priv_data_len.
+ *
+ * @priv_data_len: length of private data
+ * @ops: callbacks for this device
+ */
+struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
+ const struct ieee80211_ops *ops);
+
+/**
+ * ieee80211_register_hw - Register hardware device
+ *
+ * You must call this function before any other functions
+ * except ieee80211_register_hwmode.
+ *
+ * @hw: the device to register as returned by ieee80211_alloc_hw()
+ */
+int ieee80211_register_hw(struct ieee80211_hw *hw);
+
+#ifdef CONFIG_MAC80211_LEDS
+extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
+#endif
+/**
+ * ieee80211_get_tx_led_name - get name of TX LED
+ *
+ * mac80211 creates a transmit LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+ return __ieee80211_get_tx_led_name(hw);
+#else
+ return NULL;
+#endif
+}
+
+/**
+ * ieee80211_get_rx_led_name - get name of RX LED
+ *
+ * mac80211 creates a receive LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+ return __ieee80211_get_rx_led_name(hw);
+#else
+ return NULL;
+#endif
+}
+
+static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+ return __ieee80211_get_assoc_led_name(hw);
+#else
+ return NULL;
+#endif
+}
+
+
+/* Register a new hardware PHYMODE capability to the stack. */
+int ieee80211_register_hwmode(struct ieee80211_hw *hw,
+ struct ieee80211_hw_mode *mode);
+
+/**
+ * ieee80211_unregister_hw - Unregister a hardware device
+ *
+ * This function instructs mac80211 to free allocated resources
+ * and unregister netdevices from the networking subsystem.
+ *
+ * @hw: the hardware to unregister
+ */
+void ieee80211_unregister_hw(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_free_hw - free hardware descriptor
+ *
+ * This function frees everything that was allocated, including the
+ * private data for the driver. You must call ieee80211_unregister_hw()
+ * before calling this function
+ *
+ * @hw: the hardware to free
+ */
+void ieee80211_free_hw(struct ieee80211_hw *hw);
+
+/* trick to avoid symbol clashes with the ieee80211 subsystem */
+void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ieee80211_rx_status *status);
+
+/**
+ * ieee80211_rx - receive frame
+ *
+ * Use this function to hand received frames to mac80211. The receive
+ * buffer in @skb must start with an IEEE 802.11 header or a radiotap
+ * header if %RX_FLAG_RADIOTAP is set in the @status flags.
+ *
+ * This function may not be called in IRQ context.
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ * @status: status of this frame; the status pointer need not be valid
+ * after this function returns
+ */
+static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ieee80211_rx_status *status)
+{
+ __ieee80211_rx(hw, skb, status);
+}
+
+/**
+ * ieee80211_rx_irqsafe - receive frame
+ *
+ * Like ieee80211_rx() but can be called in IRQ context
+ * (internally defers to a workqueue.)
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ * @status: status of this frame; the status pointer need not be valid
+ * after this function returns and is not freed by mac80211,
+ * it is recommended that it points to a stack area
+ */
+void ieee80211_rx_irqsafe(struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct ieee80211_rx_status *status);
+
+/**
+ * ieee80211_tx_status - transmit status callback
+ *
+ * Call this function for all transmitted frames after they have been
+ * transmitted. It is permissible to not call this function for
+ * multicast frames but this can affect statistics.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ * @status: status information for this frame; the status pointer need not
+ * be valid after this function returns and is not freed by mac80211,
+ * it is recommended that it points to a stack area
+ */
+void ieee80211_tx_status(struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct ieee80211_tx_status *status);
+void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct ieee80211_tx_status *status);
+
+/**
+ * ieee80211_beacon_get - beacon generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @if_id: interface ID from &struct ieee80211_if_init_conf.
+ * @control: will be filled with information needed to send this beacon.
+ *
+ * If the beacon frames are generated by the host system (i.e., not in
+ * hardware/firmware), the low-level driver uses this function to receive
+ * the next beacon frame from the 802.11 code. The low-level is responsible
+ * for calling this function before beacon data is needed (e.g., based on
+ * hardware interrupt). Returned skb is used only once and low-level driver
+ * is responsible of freeing it.
+ */
+struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
+ int if_id,
+ struct ieee80211_tx_control *control);
+
+/**
+ * ieee80211_rts_get - RTS frame generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @if_id: interface ID from &struct ieee80211_if_init_conf.
+ * @frame: pointer to the frame that is going to be protected by the RTS.
+ * @frame_len: the frame length (in octets).
+ * @frame_txctl: &struct ieee80211_tx_control of the frame.
+ * @rts: The buffer where to store the RTS frame.
+ *
+ * If the RTS frames are generated by the host system (i.e., not in
+ * hardware/firmware), the low-level driver uses this function to receive
+ * the next RTS frame from the 802.11 code. The low-level is responsible
+ * for calling this function before and RTS frame is needed.
+ */
+void ieee80211_rts_get(struct ieee80211_hw *hw, int if_id,
+ const void *frame, size_t frame_len,
+ const struct ieee80211_tx_control *frame_txctl,
+ struct ieee80211_rts *rts);
+
+/**
+ * ieee80211_rts_duration - Get the duration field for an RTS frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @if_id: interface ID from &struct ieee80211_if_init_conf.
+ * @frame_len: the length of the frame that is going to be protected by the RTS.
+ * @frame_txctl: &struct ieee80211_tx_control of the frame.
+ *
+ * If the RTS is generated in firmware, but the host system must provide
+ * the duration field, the low-level driver uses this function to receive
+ * the duration field value in little-endian byteorder.
+ */
+__le16 ieee80211_rts_duration(struct ieee80211_hw *hw, int if_id,
+ size_t frame_len,
+ const struct ieee80211_tx_control *frame_txctl);
+
+/**
+ * ieee80211_ctstoself_get - CTS-to-self frame generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @if_id: interface ID from &struct ieee80211_if_init_conf.
+ * @frame: pointer to the frame that is going to be protected by the CTS-to-self.
+ * @frame_len: the frame length (in octets).
+ * @frame_txctl: &struct ieee80211_tx_control of the frame.
+ * @cts: The buffer where to store the CTS-to-self frame.
+ *
+ * If the CTS-to-self frames are generated by the host system (i.e., not in
+ * hardware/firmware), the low-level driver uses this function to receive
+ * the next CTS-to-self frame from the 802.11 code. The low-level is responsible
+ * for calling this function before and CTS-to-self frame is needed.
+ */
+void ieee80211_ctstoself_get(struct ieee80211_hw *hw, int if_id,
+ const void *frame, size_t frame_len,
+ const struct ieee80211_tx_control *frame_txctl,
+ struct ieee80211_cts *cts);
+
+/**
+ * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @if_id: interface ID from &struct ieee80211_if_init_conf.
+ * @frame_len: the length of the frame that is going to be protected by the CTS-to-self.
+ * @frame_txctl: &struct ieee80211_tx_control of the frame.
+ *
+ * If the CTS-to-self is generated in firmware, but the host system must provide
+ * the duration field, the low-level driver uses this function to receive
+ * the duration field value in little-endian byteorder.
+ */
+__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, int if_id,
+ size_t frame_len,
+ const struct ieee80211_tx_control *frame_txctl);
+
+/**
+ * ieee80211_generic_frame_duration - Calculate the duration field for a frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @if_id: interface ID from &struct ieee80211_if_init_conf.
+ * @frame_len: the length of the frame.
+ * @rate: the rate (in 100kbps) at which the frame is going to be transmitted.
+ *
+ * Calculate the duration field of some generic frame, given its
+ * length and transmission rate (in 100kbps).
+ */
+__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, int if_id,
+ size_t frame_len,
+ int rate);
+
+/**
+ * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @if_id: interface ID from &struct ieee80211_if_init_conf.
+ * @control: will be filled with information needed to send returned frame.
+ *
+ * Function for accessing buffered broadcast and multicast frames. If
+ * hardware/firmware does not implement buffering of broadcast/multicast
+ * frames when power saving is used, 802.11 code buffers them in the host
+ * memory. The low-level driver uses this function to fetch next buffered
+ * frame. In most cases, this is used when generating beacon frame. This
+ * function returns a pointer to the next buffered skb or NULL if no more
+ * buffered frames are available.
+ *
+ * Note: buffered frames are returned only after DTIM beacon frame was
+ * generated with ieee80211_beacon_get() and the low-level driver must thus
+ * call ieee80211_beacon_get() first. ieee80211_get_buffered_bc() returns
+ * NULL if the previous generated beacon was not DTIM, so the low-level driver
+ * does not need to check for DTIM beacons separately and should be able to
+ * use common code for all beacons.
+ */
+struct sk_buff *
+ieee80211_get_buffered_bc(struct ieee80211_hw *hw, int if_id,
+ struct ieee80211_tx_control *control);
+
+/**
+ * ieee80211_get_hdrlen_from_skb - get header length from data
+ *
+ * Given an skb with a raw 802.11 header at the data pointer this function
+ * returns the 802.11 header length in bytes (not including encryption
+ * headers). If the data in the sk_buff is too short to contain a valid 802.11
+ * header the function returns 0.
+ *
+ * @skb: the frame
+ */
+int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
+
+/**
+ * ieee80211_get_hdrlen - get header length from frame control
+ *
+ * This function returns the 802.11 header length in bytes (not including
+ * encryption headers.)
+ *
+ * @fc: the frame control field (in CPU endianness)
+ */
+int ieee80211_get_hdrlen(u16 fc);
+
+/**
+ * ieee80211_wake_queue - wake specific queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_wake_queue.
+ */
+void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue);
+
+/**
+ * ieee80211_stop_queue - stop specific queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
+
+/**
+ * ieee80211_start_queues - start all queues
+ * @hw: pointer to as obtained from ieee80211_alloc_hw().
+ *
+ * Drivers should use this function instead of netif_start_queue.
+ */
+void ieee80211_start_queues(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_stop_queues - stop all queues
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+void ieee80211_stop_queues(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_wake_queues - wake all queues
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ *
+ * Drivers should use this function instead of netif_wake_queue.
+ */
+void ieee80211_wake_queues(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_scan_completed - completed hardware scan
+ *
+ * When hardware scan offload is used (i.e. the hw_scan() callback is
+ * assigned) this function needs to be called by the driver to notify
+ * mac80211 that the scan finished.
+ *
+ * @hw: the hardware that finished the scan
+ */
+void ieee80211_scan_completed(struct ieee80211_hw *hw);
+
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) ((u8*)(x))[0], ((u8*)(x))[1], ((u8*)(x))[2], \
+ ((u8*)(x))[3], ((u8*)(x))[4], ((u8*)(x))[5]
+
+#endif /* MAC80211_H */