rb532: remove leftover patches from an even older kernel version

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15446 3c298f89-4303-0410-b956-a3cf2f4a3e73

9 files changed, 0 insertions, 388 deletions

diff --git a/target/linux/rb532/patches/100-rb5xx_support.patch b/target/linux/rb532/patches/100-rb5xx_support.patch
deleted file mode 100644
index 262ea61e15..0000000000
--- a/target/linux/rb532/patches/100-rb5xx_support.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-Index: linux-2.6.23.17/arch/mips/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/Kconfig
-+++ linux-2.6.23.17/arch/mips/Kconfig
-@@ -595,6 +595,20 @@ config WR_PPMC
- 	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
- 	  board, which is based on GT64120 bridge chip.
- 
-+config MIKROTIK_RB500
-+	bool "Support for RB5xx boards"
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SWAP_IO_SPACE
-+	select DMA_NONCOHERENT
-+	select GENERIC_GPIO
-+	help
-+	 Support the Mikrotik(tm) Routerboard 500 series,
-+	 such as the RB532.
-+
- endchoice
- 
- source "arch/mips/au1000/Kconfig"
-@@ -829,6 +843,7 @@ config MIPS_L1_CACHE_SHIFT
- 	default "4" if MACH_DECSTATION
- 	default "7" if SGI_IP27 || SNI_RM
- 	default "4" if PMC_MSP4200_EVAL
-+	default "4" if MIKROTIK_RB500
- 	default "5"
- 
- config HAVE_STD_PC_SERIAL_PORT
-Index: linux-2.6.23.17/arch/mips/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/Makefile
-+++ linux-2.6.23.17/arch/mips/Makefile
-@@ -300,6 +300,13 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xfffffff
- cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
- 
- #
-+# Routerboard 532 board
-+#
-+core-$(CONFIG_MIKROTIK_RB500)	+= arch/mips/rb500/
-+cflags-$(CONFIG_MIKROTIK_RB500)	+= -Iinclude/asm-mips/rc32434
-+load-$(CONFIG_MIKROTIK_RB500)	+= 0xffffffff80101000
-+
-+#
- # For all MIPS, Inc. eval boards
- #
- core-$(CONFIG_MIPS_BOARDS_GEN)	+= arch/mips/mips-boards/generic/
-Index: linux-2.6.23.17/arch/mips/pci/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/pci/Makefile
-+++ linux-2.6.23.17/arch/mips/pci/Makefile
-@@ -46,3 +46,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
- obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
-+obj-$(CONFIG_MIKROTIK_RB500)	+= pci-rc32434.o ops-rc32434.o fixup-rb500.o
-Index: linux-2.6.23.17/drivers/pci/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/pci/Makefile
-+++ linux-2.6.23.17/drivers/pci/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o
- obj-$(CONFIG_PPC64) += setup-bus.o
- obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
- obj-$(CONFIG_X86_VISWS) += setup-irq.o
-+obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
- 
- #
- # ACPI Related PCI FW Functions
-Index: linux-2.6.23.17/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.23.17/include/asm-mips/bootinfo.h
-@@ -208,6 +208,11 @@
- #define MACH_GROUP_WINDRIVER   28	/* Windriver boards */
- #define MACH_WRPPMC             1
- 
-+
-+#define MACH_GROUP_MIKROTIK	29 	/* Mikrotik Boards                       */
-+#define  MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 */
-+#define  MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A */
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- const char *get_system_type(void);
-Index: linux-2.6.23.17/include/asm-mips/cpu.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/cpu.h
-+++ linux-2.6.23.17/include/asm-mips/cpu.h
-@@ -217,8 +217,9 @@
- #define CPU_R14000		64
- #define CPU_LOONGSON1           65
- #define CPU_LOONGSON2           66
-+#define CPU_RC32300            	67
- 
--#define CPU_LAST		66
-+#define CPU_LAST		67
- 
- /*
-  * ISA Level encodings
diff --git a/target/linux/rb532/patches/110-korina_ethernet.patch b/target/linux/rb532/patches/110-korina_ethernet.patch
deleted file mode 100644
index acfba6c00a..0000000000
--- a/target/linux/rb532/patches/110-korina_ethernet.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-Index: linux-2.6.23.17/drivers/net/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/Kconfig
-+++ linux-2.6.23.17/drivers/net/Kconfig
-@@ -348,6 +348,13 @@ config AX88796
- 	  AX88796 driver, using platform bus to provide
- 	  chip detection and resources
- 
-+config KORINA
-+	tristate "Korina Local Ethernet support"
-+	depends on NET_ETHERNET && ( IDT_EB434 || MIKROTIK_RB500)
-+	help
-+	IDT RC32434 has one local ethernet port. Say Y here to enable it.
-+	To compile this driver as a module, choose M here.
-+
- config MACE
- 	tristate "MACE (Power Mac ethernet) support"
- 	depends on PPC_PMAC && PPC32
-Index: linux-2.6.23.17/drivers/net/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/Makefile
-+++ linux-2.6.23.17/drivers/net/Makefile
-@@ -25,6 +25,8 @@ ucc_geth_driver-objs := ucc_geth.o ucc_g
- #
- obj-$(CONFIG_PLIP) += plip.o
- 
-+obj-$(CONFIG_KORINA) += korina.o
-+
- obj-$(CONFIG_ROADRUNNER) += rrunner.o
- 
- obj-$(CONFIG_HAPPYMEAL) += sunhme.o
diff --git a/target/linux/rb532/patches/120-cf.patch b/target/linux/rb532/patches/120-cf.patch
deleted file mode 100644
index 522195e451..0000000000
--- a/target/linux/rb532/patches/120-cf.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-Index: linux-2.6.23.17/drivers/block/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/block/Kconfig
-+++ linux-2.6.23.17/drivers/block/Kconfig
-@@ -426,6 +426,14 @@ config SUNVDC
- 	  Support for virtual disk devices as a client under Sun
- 	  Logical Domains.
- 
-+config BLK_DEV_CF_MIPS
-+	bool "CF slot of RB532 board"
-+	depends on MIKROTIK_RB500
-+	default y
-+	help
-+	 The Routerboard 532 has a CF slot on it. Enable the special block
-+	 device driver for it.
-+
- source "drivers/s390/block/Kconfig"
- 
- config XILINX_SYSACE
-Index: linux-2.6.23.17/drivers/block/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/block/Makefile
-+++ linux-2.6.23.17/drivers/block/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_BLK_DEV_DAC960)	+= DAC960.o
- obj-$(CONFIG_XILINX_SYSACE)	+= xsysace.o
- obj-$(CONFIG_CDROM_PKTCDVD)	+= pktcdvd.o
- obj-$(CONFIG_SUNVDC)		+= sunvdc.o
-+obj-$(CONFIG_BLK_DEV_CF_MIPS)	+= rb500/
- 
- obj-$(CONFIG_BLK_DEV_UMEM)	+= umem.o
- obj-$(CONFIG_BLK_DEV_NBD)	+= nbd.o
diff --git a/target/linux/rb532/patches/140-cmdline_hack.patch b/target/linux/rb532/patches/140-cmdline_hack.patch
deleted file mode 100644
index 1e01e953e5..0000000000
--- a/target/linux/rb532/patches/140-cmdline_hack.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-Index: linux-2.6.23.17/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/kernel/head.S
-+++ linux-2.6.23.17/arch/mips/kernel/head.S
-@@ -132,6 +132,10 @@
- 
- 	j kernel_entry
- 	nop
-+
-+EXPORT(_image_cmdline)
-+       .ascii "CMDLINE:"
-+
- #ifndef CONFIG_NO_EXCEPT_FILL
- 	/*
- 	 * Reserved space for exception handlers.
diff --git a/target/linux/rb532/patches/200-bridge_resource_hack.patch b/target/linux/rb532/patches/200-bridge_resource_hack.patch
deleted file mode 100644
index 707935539b..0000000000
--- a/target/linux/rb532/patches/200-bridge_resource_hack.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-Index: linux-2.6.23.17/arch/mips/pci/pci.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/pci/pci.c
-+++ linux-2.6.23.17/arch/mips/pci/pci.c
-@@ -64,8 +64,10 @@ pcibios_align_resource(void *data, struc
- 		/*
- 		 * Put everything into 0x00-0xff region modulo 0x400
- 		 */
-+#ifndef CONFIG_MIKROTIK_RB500
- 		if (start & 0x300)
- 			start = (start + 0x3ff) & ~0x3ff;
-+#endif
- 	} else if (res->flags & IORESOURCE_MEM) {
- 		/* Make sure we start at our min on all hoses */
- 		if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
diff --git a/target/linux/rb532/patches/220-serial_fix.patch b/target/linux/rb532/patches/220-serial_fix.patch
deleted file mode 100644
index 4af6620fb5..0000000000
--- a/target/linux/rb532/patches/220-serial_fix.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-Index: linux-2.6.23.17/drivers/serial/8250.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/serial/8250.c
-+++ linux-2.6.23.17/drivers/serial/8250.c
-@@ -433,6 +433,13 @@ serial_out(struct uart_8250_port *up, in
- 	default:
- 		outb(value, up->port.iobase + offset);
- 	}
-+
-+#if defined(CONFIG_IDT_EB434) || defined(CONFIG_MIKROTIK_RB500)
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+	__SLOW_DOWN_IO;
-+#endif
- }
- 
- static void
diff --git a/target/linux/rb532/patches/240-via_rhine_performance.patch b/target/linux/rb532/patches/240-via_rhine_performance.patch
deleted file mode 100644
index d82b6f7055..0000000000
--- a/target/linux/rb532/patches/240-via_rhine_performance.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-Index: linux-2.6.23.17/drivers/net/via-rhine.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/via-rhine.c
-+++ linux-2.6.23.17/drivers/net/via-rhine.c
-@@ -33,6 +33,8 @@
- #define DRV_VERSION	"1.4.3"
- #define DRV_RELDATE	"2007-03-06"
- 
-+#define PKT_ALIGN 1
-+
- 
- /* A few user-configurable values.
-    These may be modified when a driver module is loaded. */
-@@ -40,6 +42,7 @@
- static int debug = 1;	/* 1 normal messages, 0 quiet .. 7 verbose. */
- static int max_interrupt_work = 20;
- 
-+#ifndef PKT_ALIGN
- /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
-    Setting to > 1518 effectively disables this feature. */
- #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-@@ -49,6 +52,7 @@ static int rx_copybreak = 1518;
- #else
- static int rx_copybreak;
- #endif
-+#endif /* PKT_ALIGN */
- 
- /* Work-around for broken BIOSes: they are unable to get the chip back out of
-    power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
-@@ -111,6 +115,7 @@ static const int multicast_filter_limit 
- #include <asm/io.h>
- #include <asm/irq.h>
- #include <asm/uaccess.h>
-+#include <asm/unaligned.h>
- #include <linux/dmi.h>
- 
- /* These identify the driver base version and may not be removed. */
-@@ -130,12 +135,14 @@ MODULE_LICENSE("GPL");
- 
- module_param(max_interrupt_work, int, 0);
- module_param(debug, int, 0);
--module_param(rx_copybreak, int, 0);
- module_param(avoid_D3, bool, 0);
- MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
- MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
--MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
- MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
-+#ifndef PKT_ALIGN
-+module_param(rx_copybreak, int, 0);
-+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
-+#endif
- 
- /*
- 		Theory of Operation
-@@ -927,7 +934,7 @@ static void alloc_rbufs(struct net_devic
- 
- 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
- 	for (i = 0; i < RX_RING_SIZE; i++) {
--		struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
-+		struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz + 4);
- 		rp->rx_skbuff[i] = skb;
- 		if (skb == NULL)
- 			break;
-@@ -1484,7 +1491,9 @@ static int rhine_rx(struct net_device *d
- 			struct sk_buff *skb;
- 			/* Length should omit the CRC */
- 			int pkt_len = data_size - 4;
--
-+#ifdef PKT_ALIGN
-+			int i;
-+#else
- 			/* Check if the packet is long enough to accept without
- 			   copying to a minimally-sized skbuff. */
- 			if (pkt_len < rx_copybreak &&
-@@ -1503,7 +1512,9 @@ static int rhine_rx(struct net_device *d
- 							       rp->rx_skbuff_dma[entry],
- 							       rp->rx_buf_sz,
- 							       PCI_DMA_FROMDEVICE);
--			} else {
-+			} else
-+#endif
-+			{
- 				skb = rp->rx_skbuff[entry];
- 				if (skb == NULL) {
- 					printk(KERN_ERR "%s: Inconsistent Rx "
-@@ -1517,6 +1528,14 @@ static int rhine_rx(struct net_device *d
- 						 rp->rx_skbuff_dma[entry],
- 						 rp->rx_buf_sz,
- 						 PCI_DMA_FROMDEVICE);
-+#ifdef PKT_ALIGN
-+				/* align the data to the ip header - should be faster than copying the entire packet */
-+				for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) {
-+					put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2));
-+				}
-+				skb->data += 2;
-+				skb->tail += 2;
-+#endif
- 			}
- 			skb->protocol = eth_type_trans(skb, dev);
- #ifdef CONFIG_VIA_RHINE_NAPI
diff --git a/target/linux/rb532/patches/510-rb500_led.patch b/target/linux/rb532/patches/510-rb500_led.patch
deleted file mode 100644
index 714c112a76..0000000000
--- a/target/linux/rb532/patches/510-rb500_led.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-Index: linux-2.6.23.17/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/leds/Kconfig
-+++ linux-2.6.23.17/drivers/leds/Kconfig
-@@ -107,6 +107,12 @@ config LEDS_GPIO
- 	  outputs. To be useful the particular board must have LEDs
- 	  and they must be connected to the GPIO lines.
- 
-+config LEDS_RB500
-+	tristate "LED Support for RB5xx boards"
-+	depends LEDS_CLASS && MIKROTIK_RB500
-+	help
-+	  This option enables support for the yellow user LED on RB5xx boards.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
-Index: linux-2.6.23.17/drivers/leds/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/leds/Makefile
-+++ linux-2.6.23.17/drivers/leds/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_ALIX)			+= leds-alix.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
- obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
-+obj-$(CONFIG_LEDS_RB500)		+= leds-rb500.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/target/linux/rb532/patches/520-rc32434_wdt.patch b/target/linux/rb532/patches/520-rc32434_wdt.patch
deleted file mode 100644
index 32ee23adb7..0000000000
--- a/target/linux/rb532/patches/520-rc32434_wdt.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-Index: linux-2.6.23.17/arch/mips/kernel/time.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/kernel/time.c
-+++ linux-2.6.23.17/arch/mips/kernel/time.c
-@@ -479,3 +479,5 @@ EXPORT_SYMBOL(rtc_lock);
- EXPORT_SYMBOL(to_tm);
- EXPORT_SYMBOL(rtc_mips_set_time);
- EXPORT_SYMBOL(rtc_mips_get_time);
-+EXPORT_SYMBOL(mips_hpt_frequency);
-+
-Index: linux-2.6.23.17/drivers/char/watchdog/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/char/watchdog/Kconfig
-+++ linux-2.6.23.17/drivers/char/watchdog/Kconfig
-@@ -647,6 +647,19 @@ config WATCHDOG_RTAS
- 	  To compile this driver as a module, choose M here. The module
- 	  will be called wdrtas.
- 
-+config RC32434_WDT
-+	tristate "IDT Interprise 79RC32434 SoC hardware watchdog"
-+	depends on WATCHDOG && MIKROTIK_RB500
-+	help
-+	  This is a driver for hardware watchdog integrated in IDT Interprise
-+	  79RC32434 SoC. This watchdog simply watches your kernel to make sure
-+	  it doesn't freeze, and if it does, it reboots your computer after a
-+	  certain amount of time.
-+
-+	  To compile this driver as a module, choose M here: the module will be
-+	  called rc32434_wdt.
-+
-+
- # S390 Architecture
- 
- config ZVM_WATCHDOG
-Index: linux-2.6.23.17/drivers/char/watchdog/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/char/watchdog/Makefile
-+++ linux-2.6.23.17/drivers/char/watchdog/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1)	+= mtx-1_wdt.o
- obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
-+obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
- 
- # PARISC Architecture
-