get rid of CRLF encoding in various files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21462 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 141 insertions, 141 deletions

diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h
index 4235086d5e..9d5c9bf951 100644
--- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h
+++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h
@@ -1,49 +1,49 @@
-#ifndef _LINUX_ETRAXI2C_H

-#define _LINUX_ETRAXI2C_H

-

-/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */

-

-#define ETRAXI2C_IOCTYPE 44

-

-/* supported ioctl _IOC_NR's */

-

-/* in write operations, the argument contains both i2c

- * slave, register and value.

- */

-

-#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value))

-#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8))

-

-#define I2C_ARGSLAVE(arg) ((arg) >> 16)

-#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff)

-#define I2C_ARGVALUE(arg) ((arg) & 0xff)

-

-#define I2C_WRITEREG    0x1   /* write to an I2C register */

-#define I2C_READREG     0x2   /* read from an I2C register */

-

-/*

-EXAMPLE usage:

-

-    i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);

-    ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);

-

-    i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);

-    val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);

-

-*/

-

-/* Extended part */

-#define I2C_READ        0x4     /* reads from I2C device */

-#define I2C_WRITE       0x3     /* writes to I2C device */

-#define I2C_WRITEREAD   0x5	    /* writes to I2C device where to start reading */

-

-typedef struct _I2C_DATA 

-{

-    unsigned char slave;        /* I2C address (8-bit representation) of slave device */

-    unsigned char wbuf[256];    /* Write buffer (length = 256 bytes) */

-	unsigned int  wlen;         /* Number of bytes to write from wbuf[] */   

-	unsigned char rbuf[256];    /* Read buffer (length = 256 bytes) */

-    unsigned int  rlen;         /* Number of bytes to read into rbuf[] */

-} I2C_DATA;

-

-#endif

+#ifndef _LINUX_ETRAXI2C_H
+#define _LINUX_ETRAXI2C_H
+
+/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */
+
+#define ETRAXI2C_IOCTYPE 44
+
+/* supported ioctl _IOC_NR's */
+
+/* in write operations, the argument contains both i2c
+ * slave, register and value.
+ */
+
+#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value))
+#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8))
+
+#define I2C_ARGSLAVE(arg) ((arg) >> 16)
+#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff)
+#define I2C_ARGVALUE(arg) ((arg) & 0xff)
+
+#define I2C_WRITEREG    0x1   /* write to an I2C register */
+#define I2C_READREG     0x2   /* read from an I2C register */
+
+/*
+EXAMPLE usage:
+
+    i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
+    ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
+
+    i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
+    val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
+
+*/
+
+/* Extended part */
+#define I2C_READ        0x4     /* reads from I2C device */
+#define I2C_WRITE       0x3     /* writes to I2C device */
+#define I2C_WRITEREAD   0x5	    /* writes to I2C device where to start reading */
+
+typedef struct _I2C_DATA 
+{
+    unsigned char slave;        /* I2C address (8-bit representation) of slave device */
+    unsigned char wbuf[256];    /* Write buffer (length = 256 bytes) */
+	unsigned int  wlen;         /* Number of bytes to write from wbuf[] */   
+	unsigned char rbuf[256];    /* Read buffer (length = 256 bytes) */
+    unsigned int  rlen;         /* Number of bytes to read into rbuf[] */
+} I2C_DATA;
+
+#endif
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h
index 7de4ad62c0..ddd99b0e5b 100644
--- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h
+++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_errno.h
@@ -1,20 +1,20 @@
-#ifndef _I2C_ERRNO_H

-#define _I2C_ERRNO_H

-

-#define EI2CNOERRORS  0     /* All fine */

-#define EI2CBUSNFREE  1     /* I2C bus not free */

-#define EI2CWADDRESS  2     /* Address write failed */

-#define EI2CRADDRESS  3     /* Address read failed */

-#define EI2CSENDDATA  4     /* Sending data failed */

-#define EI2CRECVDATA  5     /* Receiving data failed */

-#define EI2CSTRTCOND  6     /* Start condition failed */

-#define EI2CRSTACOND  7     /* Repeated start condition failed */

-#define EI2CSTOPCOND  8     /* Stop condition failed */

-#define EI2CNOSNDBYT  9     /* Number of send bytes is 0, while there's a send buffer defined */ 

-#define EI2CNOSNDBUF  10    /* No send buffer defined, while number of send bytes is not 0 */

-#define EI2CNORCVBYT  11    /* Number of receive bytes is 0, while there's a receive buffer defined */

-#define EI2CNORCVBUF  12    /* No receive buffer defined, while number of receive bytes is not 0 */

-#define EI2CNOACKNLD  13    /* No acknowledge received from slave */

-#define EI2CNOMNUMBR  14    /* No MAJOR number received from kernel while registering the device */

-

-#endif /* _I2C_ERRNO_H */

+#ifndef _I2C_ERRNO_H
+#define _I2C_ERRNO_H
+
+#define EI2CNOERRORS  0     /* All fine */
+#define EI2CBUSNFREE  1     /* I2C bus not free */
+#define EI2CWADDRESS  2     /* Address write failed */
+#define EI2CRADDRESS  3     /* Address read failed */
+#define EI2CSENDDATA  4     /* Sending data failed */
+#define EI2CRECVDATA  5     /* Receiving data failed */
+#define EI2CSTRTCOND  6     /* Start condition failed */
+#define EI2CRSTACOND  7     /* Repeated start condition failed */
+#define EI2CSTOPCOND  8     /* Stop condition failed */
+#define EI2CNOSNDBYT  9     /* Number of send bytes is 0, while there's a send buffer defined */ 
+#define EI2CNOSNDBUF  10    /* No send buffer defined, while number of send bytes is not 0 */
+#define EI2CNORCVBYT  11    /* Number of receive bytes is 0, while there's a receive buffer defined */
+#define EI2CNORCVBUF  12    /* No receive buffer defined, while number of receive bytes is not 0 */
+#define EI2CNOACKNLD  13    /* No acknowledge received from slave */
+#define EI2CNOMNUMBR  14    /* No MAJOR number received from kernel while registering the device */
+
+#endif /* _I2C_ERRNO_H */
diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h
index e4d4d2c7fe..cac2d4689b 100644
--- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h
+++ b/target/linux/etrax/files/arch/cris/arch-v10/drivers/i2c_gvc.h
@@ -1,30 +1,30 @@
-#ifndef _I2C_H

-#define _I2C_H

-

-int i2c_init(void);

-

-/* High level I2C actions */

-int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);

-unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);

-

-/* Low level I2C */

-int i2c_start(void);

-int i2c_stop(void);

-int i2c_outbyte(unsigned char x);

-unsigned char i2c_inbyte(void);

-int i2c_getack(void);

-void i2c_sendack(void);

-void i2c_sendnack(void);

-

-/**GVC**/

-/* New low level I2C functions */

-int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen );

-int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen );

-int i2c_writeread( unsigned char  slave

-                 , unsigned char* wbuf

-                 , unsigned char  wlen

-                 , unsigned char* rbuf

-                 , unsigned char  rlen

-                 );

-/**END GVC**/

-#endif /* _I2C_H */

+#ifndef _I2C_H
+#define _I2C_H
+
+int i2c_init(void);
+
+/* High level I2C actions */
+int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
+unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
+
+/* Low level I2C */
+int i2c_start(void);
+int i2c_stop(void);
+int i2c_outbyte(unsigned char x);
+unsigned char i2c_inbyte(void);
+int i2c_getack(void);
+void i2c_sendack(void);
+void i2c_sendnack(void);
+
+/**GVC**/
+/* New low level I2C functions */
+int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen );
+int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen );
+int i2c_writeread( unsigned char  slave
+                 , unsigned char* wbuf
+                 , unsigned char  wlen
+                 , unsigned char* rbuf
+                 , unsigned char  rlen
+                 );
+/**END GVC**/
+#endif /* _I2C_H */
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile
index 9b41329852..90f36e63c4 100644
--- a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile
+++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile
@@ -1,42 +1,42 @@
-#

-# linux/arch/mips/boot/compressed/Makefile

-#

-# create a compressed zImage from the original vmlinux

-#

-

-targets		:= zImage vmlinuz vmlinux.bin.gz head.o misc.o piggy.o dummy.o

-

-OBJS 		:= $(obj)/head.o $(obj)/misc.o

-

-LD_ARGS 	:= -T $(obj)/ld.script -Ttext 0x80600000 -Bstatic

-OBJCOPY_ARGS 	:= -O elf32-tradlittlemips

-

-ENTRY 		:= $(obj)/../tools/entry

-FILESIZE 	:= $(obj)/../tools/filesize

-

-drop-sections	= .reginfo .mdebug .comment .note .pdr .options .MIPS.options

-strip-flags	= $(addprefix --remove-section=,$(drop-sections))

-

-

-$(obj)/vmlinux.bin.gz: vmlinux

-	rm -f $(obj)/vmlinux.bin.gz

-	$(OBJCOPY) -O binary $(strip-flags) vmlinux $(obj)/vmlinux.bin

-	gzip -v9f $(obj)/vmlinux.bin

-

-$(obj)/head.o: $(obj)/head.S $(obj)/vmlinux.bin.gz vmlinux

-	$(CC) $(KBUILD_AFLAGS) \

-	-DIMAGESIZE=$(shell sh $(FILESIZE) $(obj)/vmlinux.bin.gz) \

-	-DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) vmlinux ) \

-	-DLOADADDR=$(loadaddr) \

-	-c -o $(obj)/head.o $<

-

-$(obj)/vmlinuz: $(OBJS) $(obj)/ld.script $(obj)/vmlinux.bin.gz $(obj)/dummy.o

-	$(OBJCOPY) \

-		--add-section=.image=$(obj)/vmlinux.bin.gz \

-		--set-section-flags=.image=contents,alloc,load,readonly,data \

-		$(obj)/dummy.o $(obj)/piggy.o

-	$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/piggy.o

-	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap

-

-zImage: $(obj)/vmlinuz

-	$(OBJCOPY) -O binary $(obj)/vmlinuz $(obj)/zImage	

+#
+# linux/arch/mips/boot/compressed/Makefile
+#
+# create a compressed zImage from the original vmlinux
+#
+
+targets		:= zImage vmlinuz vmlinux.bin.gz head.o misc.o piggy.o dummy.o
+
+OBJS 		:= $(obj)/head.o $(obj)/misc.o
+
+LD_ARGS 	:= -T $(obj)/ld.script -Ttext 0x80600000 -Bstatic
+OBJCOPY_ARGS 	:= -O elf32-tradlittlemips
+
+ENTRY 		:= $(obj)/../tools/entry
+FILESIZE 	:= $(obj)/../tools/filesize
+
+drop-sections	= .reginfo .mdebug .comment .note .pdr .options .MIPS.options
+strip-flags	= $(addprefix --remove-section=,$(drop-sections))
+
+
+$(obj)/vmlinux.bin.gz: vmlinux
+	rm -f $(obj)/vmlinux.bin.gz
+	$(OBJCOPY) -O binary $(strip-flags) vmlinux $(obj)/vmlinux.bin
+	gzip -v9f $(obj)/vmlinux.bin
+
+$(obj)/head.o: $(obj)/head.S $(obj)/vmlinux.bin.gz vmlinux
+	$(CC) $(KBUILD_AFLAGS) \
+	-DIMAGESIZE=$(shell sh $(FILESIZE) $(obj)/vmlinux.bin.gz) \
+	-DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) vmlinux ) \
+	-DLOADADDR=$(loadaddr) \
+	-c -o $(obj)/head.o $<
+
+$(obj)/vmlinuz: $(OBJS) $(obj)/ld.script $(obj)/vmlinux.bin.gz $(obj)/dummy.o
+	$(OBJCOPY) \
+		--add-section=.image=$(obj)/vmlinux.bin.gz \
+		--set-section-flags=.image=contents,alloc,load,readonly,data \
+		$(obj)/dummy.o $(obj)/piggy.o
+	$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/piggy.o
+	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap
+
+zImage: $(obj)/vmlinuz
+	$(OBJCOPY) -O binary $(obj)/vmlinuz $(obj)/zImage