diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2012-07-25 17:28:32 +0000 |
|---|---|---|
| committer | Felix Fietkau <nbd@openwrt.org> | 2012-07-25 17:28:32 +0000 |
| commit | 6136a078e94a7a2f3d64960cb0720bf4aa358c0a (patch) | |
| tree | cfd322af9842ff436e0e083ba050881b7854ce64 /target/linux/x86 | |
| parent | 61d613b7f4beb979e812534b3b473966ad465d9b (diff) | |
| download | master-187ad058-6136a078e94a7a2f3d64960cb0720bf4aa358c0a.tar.gz master-187ad058-6136a078e94a7a2f3d64960cb0720bf4aa358c0a.tar.bz2 master-187ad058-6136a078e94a7a2f3d64960cb0720bf4aa358c0a.zip | |
mtd: fix trx_fixup
With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'. Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem. I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.
Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32866 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/x86')
0 files changed, 0 insertions, 0 deletions