brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43461 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 134 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.18/531-board_AR-5387un.patch b/target/linux/brcm63xx/patches-3.18/531-board_AR-5387un.patch
new file mode 100644
index 0000000000..82d6c807a5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/531-board_AR-5387un.patch
@@ -0,0 +1,134 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -164,6 +164,115 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct sprom_fixup __initdata ar5387un_fixups[] = {
++	{ .offset = 2, .value = 0x05bb },
++	{ .offset = 65, .value = 0x1204 },
++	{ .offset = 78, .value = 0x0303 },
++	{ .offset = 79, .value = 0x0202 },
++	{ .offset = 80, .value = 0xff02 },
++	{ .offset = 87, .value = 0x0315 },
++	{ .offset = 88, .value = 0x0315 },
++	{ .offset = 96, .value = 0x2048 },
++	{ .offset = 97, .value = 0xff11 },
++	{ .offset = 98, .value = 0x1567 },
++	{ .offset = 99, .value = 0xfb24 },
++	{ .offset = 100, .value = 0x3e3c },
++	{ .offset = 101, .value = 0x4038 },
++	{ .offset = 102, .value = 0xfe7f },
++	{ .offset = 103, .value = 0x1279 },
++	{ .offset = 112, .value = 0x2048 },
++	{ .offset = 113, .value = 0xff03 },
++	{ .offset = 114, .value = 0x154c },
++	{ .offset = 115, .value = 0xfb27 },
++	{ .offset = 116, .value = 0x3e3c },
++	{ .offset = 117, .value = 0x4038 },
++	{ .offset = 118, .value = 0xfe87 },
++	{ .offset = 119, .value = 0x1233 },
++	{ .offset = 203, .value = 0x2226 },
++};
++
++static struct board_info __initdata board_AR5387un = {
++	.name					= "96328A-1441N1",
++	.expected_cpu_id			= 0x6328,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.use_fallback_sprom		= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 1,
++	.has_enetsw				= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "Port 1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "Port 2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "Port 3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name			= "AR-5387un:green:power",
++			.gpio			= 8,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "AR-5387un:red:power",
++			.gpio			= 4,
++		},
++		{
++			.name			= "AR-5387un:green:inet",
++			.gpio			= 7,
++		},
++		{
++			.name			= "AR-5387un:red:inet",
++			.gpio			= 1,
++		},
++		{
++			.name			= "AR-5387un:green:dsl",
++			.gpio			= 11,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 23,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM43225,
++		.pci_bus			= 1,
++		.pci_dev			= 0,
++		.board_fixups			= ar5387un_fixups,
++		.num_board_fixups		= ARRAY_SIZE(ar5387un_fixups),
++	},
++};
++
+ static struct board_info __initdata board_963281TAN = {
+ 	.name				= "963281TAN",
+ 	.expected_cpu_id		= 0x6328,
+@@ -2803,6 +2912,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
++	&board_AR5387un,
+ 	&board_963281TAN,
+ 	&board_A4001N1,
+ 	&board_dsl_274xb_f1,
+@@ -2873,6 +2983,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+ 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
+ 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++	{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+ 	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338