diff options
author | Florian Fainelli <florian@openwrt.org> | 2007-04-03 11:26:12 +0000 |
---|---|---|
committer | Florian Fainelli <florian@openwrt.org> | 2007-04-03 11:26:12 +0000 |
commit | 2e68ff9a889a98c85dcde08212a53c59435f1c65 (patch) | |
tree | 76ed696b3e25e39b51ccf35000ffb234b7b95016 /target/linux/brcm63xx-2.6/patches | |
parent | 30a4001aa4debf14d10c0718de58bb21c052faea (diff) | |
download | master-187ad058-2e68ff9a889a98c85dcde08212a53c59435f1c65.tar.gz master-187ad058-2e68ff9a889a98c85dcde08212a53c59435f1c65.tar.bz2 master-187ad058-2e68ff9a889a98c85dcde08212a53c59435f1c65.zip |
Split up brcm63xx into files/
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6848 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm63xx-2.6/patches')
3 files changed, 0 insertions, 9762 deletions
diff --git a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch index 35dfe51ae8..7267c942ae 100644 --- a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch +++ b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch @@ -44,7907 +44,6 @@ diff -urN linux-2.6.19/arch/mips/Makefile linux-2.6.19.new/arch/mips/Makefile # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -diff -urN linux-2.6.19/arch/mips/bcm963xx/Kconfig linux-2.6.19.new/arch/mips/bcm963xx/Kconfig ---- linux-2.6.19/arch/mips/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/Kconfig 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,138 @@ -+# Kernel and Driver configuration for Broadcom Commengine ADSL board -+choice -+ prompt "Broadcom Commengine ADSL board" -+ depends on BCM963XX -+ default BCM96348 -+ help -+ Select different Broadcom ADSL board -+ -+config BCM96338 -+ bool "96338 ADSL board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ -+config BCM96345 -+ bool "96345 ADSL board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ -+config BCM96348 -+ bool "96348 ADSL board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ -+endchoice -+ -+config BCM_BOARD -+ bool "Support for Broadcom Board" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SERIAL -+ bool "Support for Serial Port" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENET -+ tristate "Support for Ethernet" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_USB -+ tristate "Support for USB" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_WLAN -+ tristate "Support for Wireless" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PCI -+ bool "Support for PCI" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ select PCI -+ -+config BCM_ATMAPI -+ tristate "Support for ATM" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMTEST -+ tristate "Support for ATM Diagnostic" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ADSL -+ tristate "Support for ADSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENDPOINT -+ tristate "Support for VOICE" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PROCFS -+ tristate "Support for PROCFS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_VDSL -+ tristate "Support for VDSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SECURITY -+ tristate "Support for SECURITY" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_HPNA -+ tristate "Support for HPNA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_BOARD_IMPL -+ int "Implementation index for ADSL Board" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SERIAL_IMPL -+ int "Implementation index for Serial" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENET_IMPL -+ int "Implementation index for Ethernet" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_USB_IMPL -+ int "Implementation index for USB" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_WLAN_IMPL -+ int "Implementation index for WIRELESS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMAPI_IMPL -+ int "Implementation index for ATM" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMTEST_IMPL -+ int "Implementation index for ATM Diagnostic" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_BLAA_IMPL -+ int "Implementation index for BLAA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ADSL_IMPL -+ int "Implementation index for ADSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENDPOINT_IMPL -+ int "Implementation index for VOICE" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PROCFS_IMPL -+ int "Implementation index for PROCFS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_VDSL_IMPL -+ int "Implementation index for VDSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SECURITY_IMPL -+ int "Implementation index for SECURITY" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_HPNA_IMPL -+ int "Implementation index for HPNA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/Makefile linux-2.6.19.new/arch/mips/bcm963xx/Makefile ---- linux-2.6.19/arch/mips/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/Makefile 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,23 @@ -+# -+# Makefile for generic Broadcom MIPS boards -+# -+# Copyright (C) 2004 Broadcom Corporation -+# -+obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o -+ -+SRCBASE := $(TOPDIR) -+EXTRA_CFLAGS += -I$(SRCBASE)/include -+#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG -+EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -+ -+ -+ifeq "$(ADSL)" "ANNEX_B" -+EXTRA_CFLAGS += -DADSL_ANNEXB -+endif -+ifeq "$(ADSL)" "SADSL" -+EXTRA_CFLAGS += -DADSL_SADSL -+endif -+ifeq "$(ADSL)" "ANNEX_C" -+EXTRA_CFLAGS += -DADSL_ANNEXC -+endif -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/bcm63xx_led.c linux-2.6.19.new/arch/mips/bcm963xx/bcm63xx_led.c ---- linux-2.6.19/arch/mips/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/bcm63xx_led.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,582 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/*************************************************************************** -+ * File Name : bcm63xx_led.c -+ * -+ * Description: -+ * -+ * This file contains bcm963xx board led control API functions. -+ * -+ * To use it, do the following -+ * -+ * 1). define in the board.c the following led mappping (this is for 6345GW board): -+ * const LED_MAP_PAIR cLedMapping45GW[] = -+ * { // led name Initial state physical pin (ledMask) -+ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, -+ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, -+ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 -+ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, -+ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, -+ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. -+ * -+ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping -+ * pointer from the above struct -+ * -+ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); -+ * -+ * 3). Sample call for kernel mode: -+ * -+ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h -+ * -+ * 4). Sample call for user mode -+ * -+ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h -+ * -+ * -+ * Created on : 10/28/2002 seanl -+ * -+ ***************************************************************************/ -+ -+/* Includes. */ -+#include <linux/init.h> -+#include <linux/fs.h> -+#include <linux/capability.h> -+#include <linux/slab.h> -+#include <linux/errno.h> -+#include <linux/module.h> -+#include <linux/netdevice.h> -+#include <asm/uaccess.h> -+ -+#include <bcm_map_part.h> -+#include <board.h> -+ -+#define k100ms (HZ / 10) // ~100 ms -+#define kFastBlinkCount 0 // ~100ms -+#define kSlowBlinkCount 5 // ~600ms -+ -+#define MAX_VIRT_LEDS 12 -+ -+// uncomment // for debug led -+//#define DEBUG_LED -+ -+// global variables: -+struct timer_list gLedTimer; -+int gTimerOn = FALSE; -+int gLedCount = 0; -+ -+typedef struct ledinfo -+{ -+ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 -+ unsigned short ledActiveLow; // GPIO bit reset to turn on LED -+ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 -+ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED -+ BOARD_LED_STATE ledState; // current led state -+ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState -+ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. -+} LED_INFO, *PLED_INFO; -+ -+static PLED_INFO gLed = NULL; -+static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; -+static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; -+static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; -+ -+#if 0 /* BROKEN */ -+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+static int gLedOffInBridgeMode = 1; -+#elif defined(CONFIG_BCM96345) -+static int gLedOffInBridgeMode = 0; -+#endif -+#endif -+ -+void ledTimerExpire(void); -+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); -+ -+//************************************************************************************** -+// LED operations -+//************************************************************************************** -+ -+// turn led on and set the ledState -+void ledOn(PLED_INFO pLed) -+{ -+ if( pLed->ledMask ) -+ { -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLow ) -+ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led -+ else -+ GPIO->GPIOio |= pLed->ledMask; // turn on the led -+ pLed->ledState = pLed->savedLedState = kLedStateOn; -+ } -+} -+ -+ -+// turn led off and set the ledState -+void ledOff(PLED_INFO pLed) -+{ -+ if( pLed->ledMask ) -+ { -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLow ) -+ GPIO->GPIOio |= pLed->ledMask; // turn off the led -+ else -+ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led -+ pLed->ledState = pLed->savedLedState = kLedStateOff; -+ } -+} -+ -+// turn led on and set the ledState -+void ledOnFail(PLED_INFO pLed) -+{ -+ if( pLed->ledMaskFail ) -+ { -+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLowFail ) -+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led -+ else -+ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led -+ pLed->ledState = pLed->savedLedState = kLedStateFail; -+ } -+} -+ -+ -+// turn led off and set the ledState -+void ledOffFail(PLED_INFO pLed) -+{ -+ if( pLed->ledMaskFail ) -+ { -+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLowFail ) -+ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led -+ else -+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led -+ pLed->ledState = pLed->savedLedState = kLedStateOff; -+ } -+} -+ -+ -+// toggle the led and return the current ledState -+BOARD_LED_STATE ledToggle(PLED_INFO pLed) -+{ -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if (GPIO->GPIOio & pLed->ledMask) -+ { -+ GPIO->GPIOio &= ~(pLed->ledMask); -+ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); -+ } -+ else -+ { -+ GPIO->GPIOio |= pLed->ledMask; -+ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); -+ } -+} -+ -+ -+// led timer. Will return if timer is already on -+void ledTimerStart(void) -+{ -+ if (gTimerOn) -+ return; -+ -+#if defined(DEBUG_LED) -+ printk("led: add_timer\n"); -+#endif -+ -+ init_timer(&gLedTimer); -+ gLedTimer.function = (void*)ledTimerExpire; -+ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms -+ add_timer (&gLedTimer); -+ gTimerOn = TRUE; -+} -+ -+ -+// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and -+// restart the timer according to ledState -+void ledTimerExpire(void) -+{ -+ int i; -+ PLED_INFO pCurLed; -+ -+ gTimerOn = FALSE; -+ -+ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) -+ { -+#if defined(DEBUG_LED) -+ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); -+#endif -+ switch (pCurLed->ledState) -+ { -+ case kLedStateOn: -+ case kLedStateOff: -+ case kLedStateFail: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ break; -+ -+ case kLedStateBlinkOnce: -+ ledToggle(pCurLed); -+ pCurLed->blinkCountDown = 0; // reset to 0 -+ pCurLed->ledState = pCurLed->savedLedState; -+ if (pCurLed->ledState == kLedStateSlowBlinkContinues || -+ pCurLed->ledState == kLedStateFastBlinkContinues) -+ ledTimerStart(); // start timer if in blinkContinues stats -+ break; -+ -+ case kLedStateSlowBlinkContinues: -+ if (pCurLed->blinkCountDown-- == 0) -+ { -+ pCurLed->blinkCountDown = kSlowBlinkCount; -+ ledToggle(pCurLed); -+ } -+ ledTimerStart(); -+ break; -+ -+ case kLedStateFastBlinkContinues: -+ if (pCurLed->blinkCountDown-- == 0) -+ { -+ pCurLed->blinkCountDown = kFastBlinkCount; -+ ledToggle(pCurLed); -+ } -+ ledTimerStart(); -+ break; -+ -+ default: -+ printk("Invalid state = %d\n", pCurLed->ledState); -+ } -+ } -+} -+ -+// initialize the gLedCount and allocate and fill gLed struct -+void __init boardLedInit(PLED_MAP_PAIR cLedMapping) -+{ -+ PLED_MAP_PAIR p1, p2; -+ PLED_INFO pCurLed; -+ int needTimer = FALSE; -+ int alreadyUsed = 0; -+ -+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ -+ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; -+ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; -+#endif -+ -+ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); -+ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); -+ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); -+ -+ gLedCount = 0; -+ -+ // Check for multiple LED names and multiple LED GPIO pins that share the -+ // same physical board LED. -+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) -+ { -+ alreadyUsed = 0; -+ for( p2 = cLedMapping; p2 != p1; p2++ ) -+ { -+ if( (p1->ledMask && p1->ledMask == p2->ledMask) || -+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) -+ { -+ alreadyUsed = 1; -+ break; -+ } -+ } -+ -+ if( alreadyUsed == 0 ) -+ gLedCount++; -+ } -+ -+ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); -+ if( gLed == NULL ) -+ { -+ printk( "LED memory allocation error.\n" ); -+ return; -+ } -+ -+ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); -+ -+ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led -+ // (ledMask) the first defined led's ledInitState will be used. -+ pCurLed = gLed; -+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) -+ { -+ if( (int) p1->ledName > MAX_VIRT_LEDS ) -+ continue; -+ -+ alreadyUsed = 0; -+ for( p2 = cLedMapping; p2 != p1; p2++ ) -+ { -+ if( (p1->ledMask && p1->ledMask == p2->ledMask) || -+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) -+ { -+ alreadyUsed = 1; -+ break; -+ } -+ } -+ -+ if( alreadyUsed == 0 ) -+ { -+ // Initialize the board LED for the first time. -+ needTimer = initLedInfo( p1, pCurLed ); -+ gpVirtLeds[(int) p1->ledName] = pCurLed; -+ pCurLed++; -+ } -+ else -+ { -+ PLED_INFO pLed; -+ for( pLed = gLed; pLed != pCurLed; pLed++ ) -+ { -+ // Find the LED_INFO structure that has already been initialized. -+ if((pLed->ledMask && pLed->ledMask == p1->ledMask) || -+ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) -+ { -+ // The board LED has already been initialized but possibly -+ // not completely initialized. -+ if( p1->ledMask ) -+ { -+ pLed->ledMask = p1->ledMask; -+ pLed->ledActiveLow = p1->ledActiveLow; -+ } -+ if( p1->ledMaskFail ) -+ { -+ pLed->ledMaskFail = p1->ledMaskFail; -+ pLed->ledActiveLowFail = p1->ledActiveLowFail; -+ } -+ gpVirtLeds[(int) p1->ledName] = pLed; -+ break; -+ } -+ } -+ } -+ } -+ -+ if (needTimer) -+ ledTimerStart(); -+ -+#if defined(DEBUG_LED) -+ int i; -+ for (i=0; i < gLedCount; i++) -+ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); -+#endif -+ -+} -+ -+// Initialize a structure that contains information about a physical board LED -+// control. The board LED may contain more than one GPIO pin to control a -+// normal condition (green) or a failure condition (red). -+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) -+{ -+ int needTimer = FALSE; -+ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; -+ pCurLed->ledMask = pCurMap->ledMask; -+ pCurLed->ledActiveLow = pCurMap->ledActiveLow; -+ pCurLed->ledMaskFail = pCurMap->ledMaskFail; -+ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; -+ -+ switch (pCurLed->ledState) -+ { -+ case kLedStateOn: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOn(pCurLed); -+ break; -+ case kLedStateOff: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOff(pCurLed); -+ break; -+ case kLedStateFail: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOnFail(pCurLed); -+ break; -+ case kLedStateBlinkOnce: -+ pCurLed->blinkCountDown = 1; -+ needTimer = TRUE; -+ break; -+ case kLedStateSlowBlinkContinues: -+ pCurLed->blinkCountDown = kSlowBlinkCount; -+ needTimer = TRUE; -+ break; -+ case kLedStateFastBlinkContinues: -+ pCurLed->blinkCountDown = kFastBlinkCount; -+ needTimer = TRUE; -+ break; -+ default: -+ printk("Invalid state = %d\n", pCurLed->ledState); -+ } -+ -+ return( needTimer ); -+} -+ -+#if 0 /* BROKEN */ -+// Determines if there is at least one interface in bridge mode. Bridge mode -+// is determined by the cfm convention of naming bridge interfaces nas17 -+// through nas24. -+static int isBridgedProtocol(void) -+{ -+ extern int dev_get(const char *name); -+ const int firstBridgeId = 17; -+ const int lastBridgeId = 24; -+ int i; -+ int ret = FALSE; -+ char name[16]; -+ -+ for( i = firstBridgeId; i <= lastBridgeId; i++ ) -+ { -+ sprintf( name, "nas%d", i ); -+ -+ if( dev_get(name) ) -+ { -+ ret = TRUE; -+ break; -+ } -+ } -+ -+ return(ret); -+} -+#endif -+ -+// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation -+void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -+{ -+ PLED_INFO ledInfoPtr; -+ -+ // do the mapping from virtual to physical led -+ if( (int) ledName < MAX_VIRT_LEDS ) -+ ledInfoPtr = gpVirtLeds[(int) ledName]; -+ else -+ ledInfoPtr = NULL; -+ -+ if (ledInfoPtr == NULL) -+ return; -+ -+ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) -+ { -+ (*gLedHwFunc[(int) ledName]) (ledName, ledState); -+ ledOffFail(ledInfoPtr); -+ return; -+ } -+ else -+ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) -+ { -+ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); -+ ledOff(ledInfoPtr); -+ return; -+ } -+ -+#if 0 /* BROKEN */ -+ // Do not blink the WAN Data LED if at least one interface is in bridge mode. -+ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) -+ { -+ static int BridgedProtocol = -1; -+ -+ if( BridgedProtocol == -1 ) -+ BridgedProtocol = isBridgedProtocol(); -+ -+ if( BridgedProtocol == TRUE ) -+ return; -+ } -+#endif -+ -+ // If the state is kLedStateFail and there is not a failure LED defined -+ // in the board parameters, change the state to kLedStateFastBlinkContinues. -+ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) -+ ledState = kLedStateFastBlinkContinues; -+ -+ switch (ledState) -+ { -+ case kLedStateOn: -+ // First, turn off the complimentary (failure) LED GPIO. -+ if( ledInfoPtr->ledMaskFail ) -+ ledOffFail(ledInfoPtr); -+ else -+ if( gLedHwFailFunc[(int) ledName] ) -+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn on the specified LED GPIO. -+ ledOn(ledInfoPtr); -+ break; -+ -+ case kLedStateOff: -+ // First, turn off the complimentary (failure) LED GPIO. -+ if( ledInfoPtr->ledMaskFail ) -+ ledOffFail(ledInfoPtr); -+ else -+ if( gLedHwFailFunc[(int) ledName] ) -+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn off the specified LED GPIO. -+ ledOff(ledInfoPtr); -+ break; -+ -+ case kLedStateFail: -+ // First, turn off the complimentary (normal) LED GPIO. -+ if( ledInfoPtr->ledMask ) -+ ledOff(ledInfoPtr); -+ else -+ if( gLedHwFunc[(int) ledName] ) -+ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn on (red) the specified LED GPIO. -+ ledOnFail(ledInfoPtr); -+ break; -+ -+ case kLedStateBlinkOnce: -+ // skip blinkOnce if it is already in Slow/Fast blink continues state -+ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || -+ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) -+ ; -+ else -+ { -+ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 -+ { -+ ledToggle(ledInfoPtr); -+ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires -+ ledInfoPtr->ledState = kLedStateBlinkOnce; -+ ledTimerStart(); -+ } -+ } -+ break; -+ -+ case kLedStateSlowBlinkContinues: -+ ledInfoPtr->blinkCountDown = kSlowBlinkCount; -+ ledInfoPtr->ledState = kLedStateSlowBlinkContinues; -+ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; -+ ledTimerStart(); -+ break; -+ -+ case kLedStateFastBlinkContinues: -+ ledInfoPtr->blinkCountDown = kFastBlinkCount; -+ ledInfoPtr->ledState = kLedStateFastBlinkContinues; -+ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; -+ ledTimerStart(); -+ break; -+ -+ default: -+ printk("Invalid led state\n"); -+ } -+} -+ -+// This function is called for an LED that is controlled by hardware. -+void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, -+ HANDLE_LED_FUNC ledHwFunc, int ledFailType ) -+{ -+ if( (int) ledName < MAX_VIRT_LEDS ) -+ { -+ if( ledFailType == 1 ) -+ gLedHwFailFunc[(int) ledName] = ledHwFunc; -+ else -+ gLedHwFunc[(int) ledName] = ledHwFunc; -+ } -+} -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/board.c linux-2.6.19.new/arch/mips/bcm963xx/board.c ---- linux-2.6.19/arch/mips/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/board.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,559 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+/* Includes. */ -+#include <linux/version.h> -+#include <linux/init.h> -+#include <linux/fs.h> -+#include <linux/interrupt.h> -+#include <linux/capability.h> -+#include <linux/slab.h> -+#include <linux/errno.h> -+#include <linux/module.h> -+#include <linux/pagemap.h> -+#include <asm/uaccess.h> -+#include <linux/wait.h> -+#include <linux/poll.h> -+#include <linux/sched.h> -+#include <linux/list.h> -+#include <linux/if.h> -+#include <linux/spinlock.h> -+ -+#include <bcm_map_part.h> -+#include <board.h> -+#include <bcmTag.h> -+#include "boardparms.h" -+#include "bcm_intr.h" -+#include "board.h" -+#include "bcm_map_part.h" -+ -+static DEFINE_SPINLOCK(board_lock); -+ -+/* Typedefs. */ -+#if defined (NON_CONSECUTIVE_MAC) -+// used to be the last octet. Now changed to the first 5 bits of the the forth octet -+// to reduced the duplicated MAC addresses. -+#define CHANGED_OCTET 3 -+#define SHIFT_BITS 3 -+#else -+#define CHANGED_OCTET 1 -+#define SHIFT_BITS 0 -+#endif -+ -+typedef struct -+{ -+ unsigned long ulId; -+ char chInUse; -+ char chReserved[3]; -+} MAC_ADDR_INFO, *PMAC_ADDR_INFO; -+ -+typedef struct -+{ -+ unsigned long ulSdramSize; -+ unsigned long ulPsiSize; -+ unsigned long ulNumMacAddrs; -+ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ MAC_ADDR_INFO MacAddrs[1]; -+} NVRAM_INFO, *PNVRAM_INFO; -+ -+typedef struct -+{ -+ unsigned long eventmask; -+} BOARD_IOC, *PBOARD_IOC; -+ -+ -+/*Dyinggasp callback*/ -+typedef void (*cb_dgasp_t)(void *arg); -+typedef struct _CB_DGASP__LIST -+{ -+ struct list_head list; -+ char name[IFNAMSIZ]; -+ cb_dgasp_t cb_dgasp_fn; -+ void *context; -+}CB_DGASP_LIST , *PCB_DGASP_LIST; -+ -+ -+static LED_MAP_PAIR LedMapping[] = -+{ // led name Initial state physical pin (ledMask) -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. -+}; -+ -+/* Externs. */ -+extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); -+extern unsigned int nr_free_pages (void); -+extern const char *get_system_type(void); -+extern void kerSysFlashInit(void); -+extern unsigned long get_nvram_start_addr(void); -+extern unsigned long get_scratch_pad_start_addr(void); -+extern unsigned long getMemorySize(void); -+extern void __init boardLedInit(PLED_MAP_PAIR); -+extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -+extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, -+ HANDLE_LED_FUNC ledHwFunc, int ledFailType ); -+ -+/* Prototypes. */ -+void __init InitNvramInfo( void ); -+ -+/* DyingGasp function prototype */ -+static void __init kerSysDyingGaspMapIntr(void); -+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id); -+static void __init kerSysInitDyingGaspHandler( void ); -+static void __exit kerSysDeinitDyingGaspHandler( void ); -+/* -DyingGasp function prototype - */ -+ -+static PNVRAM_INFO g_pNvramInfo = NULL; -+static int g_ledInitialized = 0; -+static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; -+ -+static int g_wakeup_monitor = 0; -+static struct file *g_monitor_file = NULL; -+static struct task_struct *g_monitor_task = NULL; -+static unsigned int (*g_orig_fop_poll) -+ (struct file *, struct poll_table_struct *) = NULL; -+ -+void kerSysMipsSoftReset(void) -+{ -+ if (PERF->RevID == 0x634800A1) { -+ typedef void (*FNPTR) (void); -+ FNPTR bootaddr = (FNPTR) FLASH_BASE; -+ int i; -+ -+ /* Disable interrupts. */ -+ //cli(); -+ spin_lock_irq(&board_lock); -+ -+ /* Reset all blocks. */ -+ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; -+ for( i = 0; i < 1000000; i++ ) -+ ; -+ PERF->BlockSoftReset |= BSR_ALL_BLOCKS; -+ /* Jump to the power on address. */ -+ (*bootaddr) (); -+ } -+ else -+ PERF->pll_control |= SOFT_RESET; // soft reset mips -+} -+ -+ -+int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) -+{ -+ int nRet = 0; -+ PMAC_ADDR_INFO pMai = NULL; -+ PMAC_ADDR_INFO pMaiFreeNoId = NULL; -+ PMAC_ADDR_INFO pMaiFreeId = NULL; -+ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; -+ -+ /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas -+ * * à relire plusieurs fois */ -+ /* inv_xde */ -+#if 0 -+ if (boot_loader_type == BOOT_CFE) -+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, -+ NVRAM_MAC_ADDRESS_LEN ); -+ else { -+#endif -+ pucaMacAddr[0] = 0x00; -+ pucaMacAddr[1] = 0x07; -+ pucaMacAddr[2] = 0x3A; -+ pucaMacAddr[3] = 0xFF; -+ pucaMacAddr[4] = 0xFF; -+ pucaMacAddr[5] = 0xFF; -+#if 0 -+ } -+#endif -+ -+ return nRet; -+} /* kerSysGetMacAddr */ -+ -+int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) -+{ -+ int nRet = -EINVAL; -+ unsigned long ulIdx = 0; -+ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - -+ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); -+ -+ // if overflow 255 (negitive), add 256 to have the correct index -+ if (idx < 0) -+ idx += 256; -+ ulIdx = (unsigned long) (idx >> SHIFT_BITS); -+ -+ if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) -+ { -+ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; -+ if( pMai->chInUse == 1 ) -+ { -+ pMai->chInUse = 0; -+ nRet = 0; -+ } -+ } -+ -+ return( nRet ); -+} /* kerSysReleaseMacAddr */ -+ -+int kerSysGetSdramSize( void ) -+{ -+ if (boot_loader_type == BOOT_CFE) { -+ return( (int) g_pNvramInfo->ulSdramSize ); -+ } -+ else { -+ printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000); -+ return((int)getMemorySize() + 0x00040000); -+ } -+} /* kerSysGetSdramSize */ -+ -+ -+void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -+{ -+ if (g_ledInitialized) -+ boardLedCtrl(ledName, ledState); -+} -+ -+unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) -+{ -+ int mask = (*g_orig_fop_poll) (f, t); -+ -+ if( g_wakeup_monitor == 1 && g_monitor_file == f ) -+ { -+ /* If g_wakeup_monitor is non-0, the user mode application needs to -+ * return from a blocking select function. Return POLLPRI which will -+ * cause the select to return with the exception descriptor set. -+ */ -+ mask |= POLLPRI; -+ g_wakeup_monitor = 0; -+ } -+ -+ return( mask ); -+} -+ -+/* Put the user mode application that monitors link state on a run queue. */ -+void kerSysWakeupMonitorTask( void ) -+{ -+ g_wakeup_monitor = 1; -+ if( g_monitor_task ) -+ wake_up_process( g_monitor_task ); -+} -+ -+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12 -+int kerSysGetResetHold(void) -+{ -+ unsigned short gpio; -+ -+ if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS ) -+ { -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg); -+ if(*gpio_reg & gpio_mask) //press down -+ return RESET_BUTTON_UP; -+ } -+ return RESET_BUTTON_PRESSDOWN; -+} -+//<<JUNHON, 2004/09/15 -+ -+/*************************************************************************** -+ * Dying gasp ISR and functions. -+ ***************************************************************************/ -+#define KERSYS_DBG printk -+ -+#if defined(CONFIG_BCM96345) -+#define CYCLE_PER_US 70 -+#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+/* The BCM6348 cycles per microsecond is really variable since the BCM6348 -+ * MIPS speed can vary depending on the PLL settings. However, an appoximate -+ * value of 120 will still work OK for the test being done. -+ */ -+#define CYCLE_PER_US 120 -+#endif -+#define DG_GLITCH_TO (100*CYCLE_PER_US) -+ -+static void __init kerSysDyingGaspMapIntr() -+{ -+ unsigned long ulIntr; -+ -+#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_) -+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { -+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG); -+ BcmHalInterruptEnable( INTERRUPT_ID_DG ); -+ } -+#elif defined(CONFIG_BCM96345) || defined(_BCM96345_) -+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { -+ ulIntr += INTERRUPT_ID_EXTERNAL_0; -+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr); -+ BcmHalInterruptEnable( ulIntr ); -+ } -+#endif -+ -+} -+ -+void kerSysSetWdTimer(ulong timeUs) -+{ -+ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000); -+ TIMER->WatchDogCtl = 0xFF00; -+ TIMER->WatchDogCtl = 0x00FF; -+} -+ -+ulong kerSysGetCycleCount(void) -+{ -+ ulong cnt; -+#ifdef _WIN32_WCE -+ cnt = 0; -+#else -+ __asm volatile("mfc0 %0, $9":"=d"(cnt)); -+#endif -+ return(cnt); -+} -+ -+static Bool kerSysDyingGaspCheckPowerLoss(void) -+{ -+ ulong clk0; -+ ulong ulIntr; -+ -+ ulIntr = 0; -+ clk0 = kerSysGetCycleCount(); -+ -+ UART->Data = 'D'; -+ UART->Data = '%'; -+ UART->Data = 'G'; -+ -+#if defined(CONFIG_BCM96345) -+ BpGetAdslDyingGaspExtIntr( &ulIntr ); -+ -+ do { -+ ulong clk1; -+ -+ clk1 = kerSysGetCycleCount(); /* time cleared */ -+ /* wait a little to get new reading */ -+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) -+ ; -+ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); -+ -+ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ -+ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); -+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); -+ return 0; -+ } -+#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) -+ do { -+ ulong clk1; -+ -+ clk1 = kerSysGetCycleCount(); /* time cleared */ -+ /* wait a little to get new reading */ -+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) -+ ; -+ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); -+ -+ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { -+ BcmHalInterruptEnable( INTERRUPT_ID_DG ); -+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); -+ return 0; -+ } -+#endif -+ return 1; -+} -+ -+static void kerSysDyingGaspShutdown( void ) -+{ -+ kerSysSetWdTimer(1000000); -+#if defined(CONFIG_BCM96345) -+ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); -+#elif defined(CONFIG_BCM96348) -+ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); -+#endif -+} -+ -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id) -+#else -+static unsigned int kerSysDyingGaspIsr(void) -+#endif -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp, *dsl = NULL; -+ -+ if (kerSysDyingGaspCheckPowerLoss()) { -+ -+ /* first to turn off everything other than dsl */ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ if(strncmp(tmp->name, "dsl", 3)) { -+ (tmp->cb_dgasp_fn)(tmp->context); -+ }else { -+ dsl = tmp; -+ } -+ } -+ -+ /* now send dgasp */ -+ if(dsl) -+ (dsl->cb_dgasp_fn)(dsl->context); -+ -+ /* reset and shutdown system */ -+ kerSysDyingGaspShutdown(); -+ } -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+return( IRQ_HANDLED ); -+#else -+ return( 1 ); -+#endif -+} -+ -+static void __init kerSysInitDyingGaspHandler( void ) -+{ -+ CB_DGASP_LIST *new_node; -+ -+ if( g_cb_dgasp_list_head != NULL) { -+ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); -+ return; -+ } -+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); -+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); -+ INIT_LIST_HEAD(&new_node->list); -+ g_cb_dgasp_list_head = new_node; -+ -+} /* kerSysInitDyingGaspHandler */ -+ -+static void __exit kerSysDeinitDyingGaspHandler( void ) -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp; -+ -+ if(g_cb_dgasp_list_head == NULL) -+ return; -+ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ list_del(pos); -+ kfree(tmp); -+ } -+ -+ kfree(g_cb_dgasp_list_head); -+ g_cb_dgasp_list_head = NULL; -+ -+} /* kerSysDeinitDyingGaspHandler */ -+ -+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) -+{ -+ CB_DGASP_LIST *new_node; -+ -+ if( g_cb_dgasp_list_head == NULL) { -+ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); -+ return; -+ } -+ -+ if( devname == NULL || cbfn == NULL ) { -+ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); -+ return; -+ } -+ -+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); -+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); -+ INIT_LIST_HEAD(&new_node->list); -+ strncpy(new_node->name, devname, IFNAMSIZ); -+ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; -+ new_node->context = context; -+ list_add(&new_node->list, &g_cb_dgasp_list_head->list); -+ -+ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); -+ -+} /* kerSysRegisterDyingGaspHandler */ -+ -+void kerSysDeregisterDyingGaspHandler(char *devname) -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp; -+ -+ if(g_cb_dgasp_list_head == NULL) { -+ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); -+ return; -+ } -+ -+ if(devname == NULL) { -+ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); -+ return; -+ } -+ -+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); -+ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ if(!strcmp(tmp->name, devname)) { -+ list_del(pos); -+ kfree(tmp); -+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); -+ return; -+ } -+ } -+ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); -+ -+} /* kerSysDeregisterDyingGaspHandler */ -+ -+//EXPORT_SYMBOL(kerSysNvRamGet); -+EXPORT_SYMBOL(kerSysGetMacAddress); -+EXPORT_SYMBOL(kerSysReleaseMacAddress); -+EXPORT_SYMBOL(kerSysGetSdramSize); -+EXPORT_SYMBOL(kerSysLedCtrl); -+EXPORT_SYMBOL(kerSysGetResetHold); -+EXPORT_SYMBOL(kerSysLedRegisterHwHandler); -+EXPORT_SYMBOL(BpGetBoardIds); -+EXPORT_SYMBOL(BpGetSdramSize); -+EXPORT_SYMBOL(BpGetPsiSize); -+EXPORT_SYMBOL(BpGetEthernetMacInfo); -+EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); -+EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); -+EXPORT_SYMBOL(BpGetVoipResetGpio); -+EXPORT_SYMBOL(BpGetVoipIntrGpio); -+EXPORT_SYMBOL(BpGetPcmciaResetGpio); -+EXPORT_SYMBOL(BpGetRtsCtsUartGpios); -+EXPORT_SYMBOL(BpGetAdslLedGpio); -+EXPORT_SYMBOL(BpGetAdslFailLedGpio); -+EXPORT_SYMBOL(BpGetWirelessLedGpio); -+EXPORT_SYMBOL(BpGetUsbLedGpio); -+EXPORT_SYMBOL(BpGetHpnaLedGpio); -+EXPORT_SYMBOL(BpGetWanDataLedGpio); -+EXPORT_SYMBOL(BpGetPppLedGpio); -+EXPORT_SYMBOL(BpGetPppFailLedGpio); -+EXPORT_SYMBOL(BpGetVoipLedGpio); -+EXPORT_SYMBOL(BpGetWirelessExtIntr); -+EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); -+EXPORT_SYMBOL(BpGetVoipExtIntr); -+EXPORT_SYMBOL(BpGetHpnaExtIntr); -+EXPORT_SYMBOL(BpGetHpnaChipSelect); -+EXPORT_SYMBOL(BpGetVoipChipSelect); -+EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); -+EXPORT_SYMBOL(BpGetWirelessSesExtIntr); -+EXPORT_SYMBOL(BpGetWirelessSesLedGpio); -+EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); -+EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); -+EXPORT_SYMBOL(kerSysGetCycleCount); -+EXPORT_SYMBOL(kerSysSetWdTimer); -+EXPORT_SYMBOL(kerSysWakeupMonitorTask); -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/boardparms.c linux-2.6.19.new/arch/mips/bcm963xx/boardparms.c ---- linux-2.6.19/arch/mips/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/boardparms.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,2391 @@ -+/* -+<:copyright-gpl -+ -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ -+:> -+*/ -+/************************************************************************** -+ * File Name : boardparms.c -+ * -+ * Description: This file contains the implementation for the BCM63xx board -+ * parameter access functions. -+ * -+ * Updates : 07/14/2003 Created. -+ ***************************************************************************/ -+ -+/* Includes. */ -+#include "boardparms.h" -+ -+/* Defines. */ -+ -+/* Default psi size in K bytes */ -+#define BP_PSI_DEFAULT_SIZE 24 -+ -+/* Typedefs */ -+typedef struct boardparameters -+{ -+ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ -+ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; -+ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; -+ unsigned short usSdramSize; /* SDRAM size and type */ -+ unsigned short usPsiSize; /* persistent storage in K bytes */ -+ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ -+ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ -+ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ -+ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ -+ unsigned short usGpioUartRts; /* GPIO pin or not defined */ -+ unsigned short usGpioUartCts; /* GPIO pin or not defined */ -+ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ -+ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ -+ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ -+ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ -+ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ -+ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ -+ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ -+ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ -+ unsigned short usExtIntrWireless; /* ext intr or not defined */ -+ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ -+ unsigned short usExtIntrHpna; /* ext intr or not defined */ -+ unsigned short usCsHpna; /* chip select not defined */ -+ unsigned short usAntInUseWireless; /* antenna in use or not defined */ -+ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ -+ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ -+ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ -+} BOARD_PARAMETERS, *PBOARD_PARAMETERS; -+ -+/* Variables */ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+static BOARD_PARAMETERS g_bcm96338sv = -+{ -+ "96338SV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_NOT_DEFINED, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ -+ BP_NOT_DEFINED, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+static BOARD_PARAMETERS g_bcm96338l2m8m = -+{ -+ "96338L-2M-8M", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; -+#endif -+ -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+static BOARD_PARAMETERS g_bcm96345r = -+{ -+ "96345R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345gw2 = -+{ -+ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold -+ * Reset or RTS. -+ */ -+ "96345GW2", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_GPIO_0_AH, /* usGpioPhySpiSck */ -+ BP_GPIO_4_AH, /* usGpioPhySpiSs */ -+ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ -+ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_GPIO, /* usConfigType */ -+ BP_ENET_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_1, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_15_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_GPIO_2_AH, /* usGpioPcmciaReset */ -+ BP_GPIO_13_AH, /* usGpioUartRts */ -+ BP_GPIO_9_AH, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_GPIO_7_AH, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_EXT_INTR_2, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345gw = -+{ -+ "96345GW", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_1, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_15_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_GPIO_2_AH, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_GPIO_10_AH, /* usGpioLedWireless */ -+ BP_GPIO_7_AH, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_EXT_INTR_2, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_EXT_INTR_3, /* usExtIntrHpna */ -+ BP_CS_1, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96335r = -+{ -+ "96335R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_9_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_9_AH, /* usGpioLedWanData */ -+ BP_GPIO_8_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_9_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345r0 = -+{ -+ "96345R0", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_9_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345rs = -+{ -+ "96345RS", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, -+ &g_bcm96345rs, 0}; -+#endif -+ -+#if defined(_BCM96348_) || defined(CONFIG_BCM96348) -+ -+static BOARD_PARAMETERS g_bcm96348r = -+{ -+ "96348R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348lv = -+{ -+ "96348LV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ -+ 0x02, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_GPIO_5_AL, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348gw = -+{ -+ "96348GW", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcm96348gw_10 = -+{ -+ "96348GW-10", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348gw_11 = -+{ -+ "96348GW-11", /* szBoardId */ -+ {{BP_ENET_NO_PHY}, /* ucPhyType */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348sv = -+{ -+ "96348SV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ -+ 0x1f, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_NOT_DEFINED, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ -+ BP_NOT_DEFINED, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcm96348gw_dualDsp = -+{ -+ "96348GW-DualDSP", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_UNEQUIPPED, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_DSP, /* ucDspType */ -+ 0x01, /* ucDspAddress */ -+ BP_EXT_INTR_3, /* usExtIntrVoip */ -+ BP_UNEQUIPPED , /* usGpioVoipReset */ -+ BP_GPIO_35_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_3}}, /* usCsVoip */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcmCustom_01 = -+{ -+ "BCMCUST_01", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_36_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AL, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, -+ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, -+ &g_bcmCustom_01, 0}; -+#endif -+ -+static PBOARD_PARAMETERS g_pCurrentBp = 0; -+ -+/************************************************************************** -+ * Name : bpstrcmp -+ * -+ * Description: String compare for this file so it does not depend on an OS. -+ * (Linux kernel and CFE share this source file.) -+ * -+ * Parameters : [IN] dest - destination string -+ * [IN] src - source string -+ * -+ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src -+ ***************************************************************************/ -+static int bpstrcmp(const char *dest,const char *src); -+static int bpstrcmp(const char *dest,const char *src) -+{ -+ while (*src && *dest) -+ { -+ if (*dest < *src) return -1; -+ if (*dest > *src) return 1; -+ dest++; -+ src++; -+ } -+ -+ if (*dest && !*src) return 1; -+ if (!*dest && *src) return -1; -+ return 0; -+} /* bpstrcmp */ -+ -+/************************************************************************** -+ * Name : BpGetVoipDspConfig -+ * -+ * Description: Gets the DSP configuration from the board parameter -+ * structure for a given DSP index. -+ * -+ * Parameters : [IN] dspNum - DSP index (number) -+ * -+ * Returns : Pointer to DSP configuration block if found/valid, NULL -+ * otherwise. -+ ***************************************************************************/ -+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); -+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) -+{ -+ VOIP_DSP_INFO *pDspConfig = 0; -+ int i; -+ -+ if( g_pCurrentBp ) -+ { -+ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) -+ { -+ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && -+ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) -+ { -+ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; -+ break; -+ } -+ } -+ } -+ -+ return pDspConfig; -+} -+ -+ -+/************************************************************************** -+ * Name : BpSetBoardId -+ * -+ * Description: This function find the BOARD_PARAMETERS structure for the -+ * specified board id string and assigns it to a global, static -+ * variable. -+ * -+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not -+ * have a board parameters configuration record. -+ ***************************************************************************/ -+int BpSetBoardId( char *pszBoardId ) -+{ -+ int nRet = BP_BOARD_ID_NOT_FOUND; -+ PBOARD_PARAMETERS *ppBp; -+ -+ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) -+ { -+ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) -+ { -+ g_pCurrentBp = *ppBp; -+ nRet = BP_SUCCESS; -+ break; -+ } -+ } -+ -+ return( nRet ); -+} /* BpSetBoardId */ -+ -+/************************************************************************** -+ * Name : BpGetBoardIds -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id -+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN -+ * boundary. -+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that -+ * were allocated in pszBoardIds. -+ * -+ * Returns : Number of board id strings returned. -+ ***************************************************************************/ -+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) -+{ -+ PBOARD_PARAMETERS *ppBp; -+ int i; -+ char *src; -+ char *dest; -+ -+ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; -+ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) -+ { -+ dest = pszBoardIds; -+ src = (*ppBp)->szBoardId; -+ while( *src ) -+ *dest++ = *src++; -+ *dest = '\0'; -+ } -+ -+ return( i ); -+} /* BpGetBoardIds */ -+ -+/************************************************************************** -+ * Name : BpGetEthernetMacInfo -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO -+ * buffers. -+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that -+ * are pointed to by pEnetInfos. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) -+{ -+ int i, nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) -+ { -+ if( i < BP_MAX_ENET_MACS ) -+ { -+ unsigned char *src = (unsigned char *) -+ &g_pCurrentBp->EnetMacInfos[i]; -+ unsigned char *dest = (unsigned char *) pEnetInfos; -+ int len = sizeof(ETHERNET_MAC_INFO); -+ while( len-- ) -+ *dest++ = *src++; -+ } -+ else -+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; -+ } -+ -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) -+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; -+ -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetEthernetMacInfo */ -+ -+/************************************************************************** -+ * Name : BpGetSdramSize -+ * -+ * Description: This function returns a constant that describees the board's -+ * SDRAM type and size. -+ * -+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size -+ * is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetSdramSize( unsigned long *pulSdramSize ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulSdramSize = g_pCurrentBp->usSdramSize; -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ *pulSdramSize = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetSdramSize */ -+ -+/************************************************************************** -+ * Name : BpGetPsiSize -+ * -+ * Description: This function returns the persistent storage size in K bytes. -+ * -+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent -+ * storage size is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetPsiSize( unsigned long *pulPsiSize ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulPsiSize = g_pCurrentBp->usPsiSize; -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ *pulPsiSize = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPsiSize */ -+ -+/************************************************************************** -+ * Name : BpGetRj11InnerOuterPairGpios -+ * -+ * Description: This function returns the GPIO pin assignments for changing -+ * between the RJ11 inner pair and RJ11 outer pair. -+ * -+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair -+ * GPIO pin is returned in. -+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, -+ unsigned short *pusOuter ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; -+ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; -+ -+ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && -+ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusInner = *pusOuter = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetRj11InnerOuterPairGpios */ -+ -+/************************************************************************** -+ * Name : BpGetPressAndHoldResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the press -+ * and hold reset button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the press and hold -+ * reset button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; -+ -+ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPressAndHoldResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioVoipReset; -+ -+ if( *pusValue != BP_NOT_DEFINED || -+ *pusValue == BP_UNEQUIPPED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipIntrGpio -+ * -+ * Description: This function returns the GPIO pin assignment for VoIP interrupt. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioVoipIntr; -+ -+ if( *pusValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipIntrGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPcmciaResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PCMCIA -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPcmciaResetGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioPcmciaReset; -+ -+ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPcmciaResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetUartRtsCtsGpios -+ * -+ * Description: This function returns the GPIO pin assignments for RTS and CTS -+ * UART signals. -+ * -+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO -+ * pin is returned in. -+ * [OUT] pusCts - Address of short word that the UART CTS GPIO -+ * pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, board id input string does not -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusRts = g_pCurrentBp->usGpioUartRts; -+ *pusCts = g_pCurrentBp->usGpioUartCts; -+ -+ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && -+ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusRts = *pusCts = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetUartRtsCtsGpios */ -+ -+/************************************************************************** -+ * Name : BpGetAdslLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedAdsl; -+ -+ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetAdslFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED that is used when there is a DSL connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslFailLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedAdslFail; -+ -+ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslFailLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedWireless; -+ -+ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessAntInUse -+ * -+ * Description: This function returns the antennas in use for wireless -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna -+ * is in use. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessAntInUse( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usAntInUseWireless; -+ -+ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessAntInUse */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesBtnGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; -+ -+ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessSesBtnGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesExtIntr -+ * -+ * Description: This function returns the external interrupt number for the -+ * Wireless Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * external interrup is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesExtIntr( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; -+ -+ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+ -+} /* BpGetWirelessSesExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Led. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Led GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedSesWireless; -+ -+ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+ -+} /* BpGetWirelessSesLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetUsbLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the USB -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the USB LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetUsbLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedUsb; -+ -+ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetUsbLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the HPNA -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedHpna; -+ -+ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWanDataLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the WAN Data -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWanDataLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedWanData; -+ -+ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWanDataLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPppLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedPpp; -+ -+ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPppLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPppFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED that is used when there is a PPP connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppFailLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedPppFail; -+ -+ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPppFailLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderPowerOnLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the power -+ * on LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; -+ -+ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderPowerOn */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderAlarmLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the alarm -+ * LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; -+ -+ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderAlarmLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderResetCfgLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the reset -+ * configuration LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the reset -+ * configuration LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; -+ -+ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderResetCfgLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderStopLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the break -+ * into bootloader LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the break into -+ * bootloader LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlStop; -+ -+ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderStopLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ * -+ * Note : The VoIP structure would allow for having one LED per DSP -+ * however, the board initialization function assumes only one -+ * LED per functionality (ie one LED for VoIP). Therefore in -+ * order to keep this tidy and simple we do not make usage of the -+ * one-LED-per-DSP function. Instead, we assume that the LED for -+ * VoIP is unique and associated with DSP 0 (always present on -+ * any VoIP platform). If changing this to a LED-per-DSP function -+ * then one need to update the board initialization driver in -+ * bcmdrivers\opensource\char\board\bcm963xx\impl1 -+ ***************************************************************************/ -+int BpGetVoipLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioLedVoip; -+ -+ if( *pusValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessExtIntr -+ * -+ * Description: This function returns the Wireless external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the wireless -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrWireless; -+ -+ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetAdslDyingGaspExtIntr -+ * -+ * Description: This function returns the ADSL Dying Gasp external interrupt -+ * number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; -+ -+ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslDyingGaspExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetVoipExtIntr -+ * -+ * Description: This function returns the VOIP external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * external interrupt number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pulValue = pDspInfo->usExtIntrVoip; -+ -+ if( *pulValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaExtIntr -+ * -+ * Description: This function returns the HPNA external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrHpna; -+ -+ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaChipSelect -+ * -+ * Description: This function returns the HPNA chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * chip select number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaChipSelect( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usCsHpna; -+ -+ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaChipSelect */ -+ -+/************************************************************************** -+ * Name : BpGetVoipChipSelect -+ * -+ * Description: This function returns the VOIP chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * chip select number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pulValue = pDspInfo->usCsVoip; -+ -+ if( *pulValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipChipSelect */ -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/boardparms.h linux-2.6.19.new/arch/mips/bcm963xx/boardparms.h ---- linux-2.6.19/arch/mips/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/boardparms.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,758 @@ -+/* -+<:copyright-gpl -+ -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ -+:> -+*/ -+/************************************************************************** -+ * File Name : boardparms.h -+ * -+ * Description: This file contains definitions and function prototypes for -+ * the BCM63xx board parameter access functions. -+ * -+ * Updates : 07/14/2003 Created. -+ ***************************************************************************/ -+ -+#if !defined(_BOARDPARMS_H) -+#define _BOARDPARMS_H -+ -+/* Return codes. */ -+#define BP_SUCCESS 0 -+#define BP_BOARD_ID_NOT_FOUND 1 -+#define BP_VALUE_NOT_DEFINED 2 -+#define BP_BOARD_ID_NOT_SET 3 -+ -+/* Values for BpGetSdramSize. */ -+#define BP_MEMORY_8MB_1_CHIP 0 -+#define BP_MEMORY_16MB_1_CHIP 1 -+#define BP_MEMORY_32MB_1_CHIP 2 -+#define BP_MEMORY_64MB_2_CHIP 3 -+#define BP_MEMORY_32MB_2_CHIP 4 -+#define BP_MEMORY_16MB_2_CHIP 5 -+ -+/* Values for EthernetMacInfo PhyType. */ -+#define BP_ENET_NO_PHY 0 -+#define BP_ENET_INTERNAL_PHY 1 -+#define BP_ENET_EXTERNAL_PHY 2 -+#define BP_ENET_EXTERNAL_SWITCH 3 -+ -+/* Values for EthernetMacInfo Configuration type. */ -+#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ -+#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ -+#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ -+ -+/* Values for EthernetMacInfo Reverse MII. */ -+#define BP_ENET_NO_REVERSE_MII 0 -+#define BP_ENET_REVERSE_MII 1 -+ -+/* Values for VoIPDSPInfo DSPType. */ -+#define BP_VOIP_NO_DSP 0 -+#define BP_VOIP_DSP 1 -+ -+ -+/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ -+#define BP_ACTIVE_MASK 0x8000 -+#define BP_ACTIVE_HIGH 0x0000 -+#define BP_ACTIVE_LOW 0x8000 -+#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) -+#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) -+#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) -+#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) -+#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) -+#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) -+#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) -+#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) -+#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) -+#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) -+#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) -+#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) -+#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) -+#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) -+#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) -+#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) -+#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) -+#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) -+#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) -+#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) -+#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) -+#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) -+#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) -+#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) -+#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) -+#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) -+#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) -+#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) -+#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) -+#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) -+#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) -+#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) -+#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) -+#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) -+#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) -+#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) -+#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) -+#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) -+#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) -+#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) -+#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) -+#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) -+#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) -+#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) -+#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) -+#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) -+#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) -+#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) -+#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) -+#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) -+#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) -+#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) -+#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) -+#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) -+#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) -+#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) -+#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) -+#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) -+#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) -+#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) -+#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) -+#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) -+#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) -+#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) -+#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) -+#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) -+#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) -+#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) -+#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) -+#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) -+#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) -+#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) -+#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) -+#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) -+ -+/* Values for external interrupt assignments. */ -+#define BP_EXT_INTR_0 0 -+#define BP_EXT_INTR_1 1 -+#define BP_EXT_INTR_2 2 -+#define BP_EXT_INTR_3 3 -+ -+/* Values for chip select assignments. */ -+#define BP_CS_0 0 -+#define BP_CS_1 1 -+#define BP_CS_2 2 -+#define BP_CS_3 3 -+ -+/* Value for GPIO and external interrupt fields that are not used. */ -+#define BP_NOT_DEFINED 0xffff -+#define BP_HW_DEFINED 0xfff0 -+#define BP_UNEQUIPPED 0xfff1 -+ -+/* Maximum size of the board id string. */ -+#define BP_BOARD_ID_LEN 16 -+ -+/* Maximum number of Ethernet MACs. */ -+#define BP_MAX_ENET_MACS 2 -+ -+/* Maximum number of VoIP DSPs. */ -+#define BP_MAX_VOIP_DSP 2 -+ -+/* Wireless Antenna Settings. */ -+#define BP_WLAN_ANT_MAIN 0 -+#define BP_WLAN_ANT_AUX 1 -+#define BP_WLAN_ANT_BOTH 3 -+ -+#if !defined(__ASSEMBLER__) -+ -+/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, -+ * then the other fields are not valid. -+ */ -+typedef struct EthernetMacInfo -+{ -+ unsigned char ucPhyType; /* BP_ENET_xxx */ -+ unsigned char ucPhyAddress; /* 0 to 31 */ -+ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ -+ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ -+ unsigned short numSwitchPorts; /* Number of PHY ports */ -+ unsigned short usConfigType; /* Configuration type */ -+ unsigned short usReverseMii; /* Reverse MII */ -+} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; -+ -+ -+/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, -+ * then the other fields are not valid. -+ */ -+typedef struct VoIPDspInfo -+{ -+ unsigned char ucDspType; -+ unsigned char ucDspAddress; -+ unsigned short usExtIntrVoip; -+ unsigned short usGpioVoipReset; -+ unsigned short usGpioVoipIntr; -+ unsigned short usGpioLedVoip; -+ unsigned short usCsVoip; -+ -+} VOIP_DSP_INFO; -+ -+ -+/************************************************************************** -+ * Name : BpSetBoardId -+ * -+ * Description: This function find the BOARD_PARAMETERS structure for the -+ * specified board id string and assigns it to a global, static -+ * variable. -+ * -+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not -+ * have a board parameters configuration record. -+ ***************************************************************************/ -+int BpSetBoardId( char *pszBoardId ); -+ -+/************************************************************************** -+ * Name : BpGetBoardIds -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id -+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN -+ * boundary. -+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that -+ * were allocated in pszBoardIds. -+ * -+ * Returns : Number of board id strings returned. -+ ***************************************************************************/ -+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); -+ -+/************************************************************************** -+ * Name : BpGetEthernetMacInfo -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO -+ * buffers. -+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that -+ * are pointed to by pEnetInfos. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); -+ -+/************************************************************************** -+ * Name : BpGetSdramSize -+ * -+ * Description: This function returns a constant that describees the board's -+ * SDRAM type and size. -+ * -+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size -+ * is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetSdramSize( unsigned long *pulSdramSize ); -+ -+/************************************************************************** -+ * Name : BpGetPsiSize -+ * -+ * Description: This function returns the persistent storage size in K bytes. -+ * -+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent -+ * storage size is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetPsiSize( unsigned long *pulPsiSize ); -+ -+/************************************************************************** -+ * Name : BpGetRj11InnerOuterPairGpios -+ * -+ * Description: This function returns the GPIO pin assignments for changing -+ * between the RJ11 inner pair and RJ11 outer pair. -+ * -+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair -+ * GPIO pin is returned in. -+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, -+ unsigned short *pusOuter ); -+ -+/************************************************************************** -+ * Name : BpGetPressAndHoldResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the press -+ * and hold reset button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the press and hold -+ * reset button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipIntrGpio -+ * -+ * Description: This function returns the GPIO pin assignment for VoIP interrupt. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPcmciaResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PCMCIA -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPcmciaResetGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetUartRtsCtsGpios -+ * -+ * Description: This function returns the GPIO pin assignments for RTS and CTS -+ * UART signals. -+ * -+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO -+ * pin is returned in. -+ * [OUT] pusCts - Address of short word that the UART CTS GPIO -+ * pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); -+ -+/************************************************************************** -+ * Name : BpGetAdslLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetAdslFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED that is used when there is a DSL connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslFailLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessAntInUse -+ * -+ * Description: This function returns the antennas in use for wireless -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna -+ * is in use. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessAntInUse( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesBtnGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesExtIntr -+ * -+ * Description: This function returns the external interrupt number for the -+ * Wireless Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * external interrup is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesExtIntr( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Led. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Led GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetUsbLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the USB -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the USB LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetUsbLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the HPNA -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWanDataLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the WAN Data -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWanDataLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPppLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPppFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED that is used when there is a PPP connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppFailLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderPowerOnLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the power -+ * on LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderAlarmLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the alarm -+ * LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderResetCfgLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the reset -+ * configuration LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the reset -+ * configuration LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderStopLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the break -+ * into bootloader LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the break into -+ * bootloader LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessExtIntr -+ * -+ * Description: This function returns the Wireless external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the wireless -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetAdslDyingGaspExtIntr -+ * -+ * Description: This function returns the ADSL Dying Gasp external interrupt -+ * number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipExtIntr -+ * -+ * Description: This function returns the VOIP external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * external interrupt number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaExtIntr -+ * -+ * Description: This function returns the HPNA external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaChipSelect -+ * -+ * Description: This function returns the HPNA chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * chip select number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaChipSelect( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipChipSelect -+ * -+ * Description: This function returns the VOIP chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * chip select number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); -+ -+#endif /* __ASSEMBLER__ */ -+ -+#endif /* _BOARDPARMS_H */ -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6338_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6338_intr.h ---- linux-2.6.19/arch/mips/bcm963xx/include/6338_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6338_intr.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,64 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __6338_INTR_H -+#define __6338_INTR_H -+ -+/*=====================================================================*/ -+/* BCM6338 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6338 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) -+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) -+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) -+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) -+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) -+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) -+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -+#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) -+ -+#endif /* __BCM6338_H */ -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6338_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6338_map_part.h ---- linux-2.6.19/arch/mips/bcm963xx/include/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6338_map_part.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,334 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6338_MAP_H -+#define __BCM6338_MAP_H -+ -+#include "bcmtypes.h" -+ -+#define PERF_BASE 0xfffe0000 -+#define TIMR_BASE 0xfffe0200 -+#define UART_BASE 0xfffe0300 -+#define GPIO_BASE 0xfffe0400 -+#define SPI_BASE 0xfffe0c00 -+ -+typedef struct PerfControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define EMAC_CLK_EN 0x0010 -+#define USBS_CLK_EN 0x0010 -+#define SAR_CLK_EN 0x0020 -+ -+#define SPI_CLK_EN 0x0200 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 5 -+#define EI_CLEAR_SHFT 10 -+#define EI_MASK_SHFT 15 -+#define EI_INSENS_SHFT 20 -+#define EI_LEVEL_SHFT 25 -+ -+ uint32 unused[4]; /* (18) */ -+ uint32 BlockSoftReset; /* (28) */ -+#define BSR_SPI 0x00000001 -+#define BSR_EMAC 0x00000004 -+#define BSR_USBH 0x00000008 -+#define BSR_USBS 0x00000010 -+#define BSR_ADSL 0x00000020 -+#define BSR_DMAMEM 0x00000040 -+#define BSR_SAR 0x00000080 -+#define BSR_ACLC 0x00000100 -+#define BSR_ADSL_MIPS_PLL 0x00000400 -+#define BSR_ALL_BLOCKS \ -+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ -+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -+} PerfControl; -+ -+#define PERF ((volatile PerfControl * const) PERF_BASE) -+ -+ -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ -+ byte config; -+#define XMITBREAK 0x40 -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ /* 4-LSBS represent STOP bits/char -+ * in 1/8 bit-time intervals. Zero -+ * represents 1/8 stop bit interval. -+ * Fifteen represents 2 stop bits. -+ */ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ /* 5-bit TimeoutCnt is in low bits of this register. -+ * This count represents the number of characters -+ * idle times before setting receive Irq when below threshold -+ */ -+ uint32 baudword; -+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate -+ */ -+ -+ byte txf_levl; /* Read-only fifo depth */ -+ byte rxf_levl; /* Read-only fifo depth */ -+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are -+ * RxThreshold. Irq can be asserted -+ * when rx fifo> thresh, txfifo<thresh -+ */ -+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) -+ * if these bits are also enabled to GPIO_o -+ */ -+#define DTREN 0x01 -+#define RTSEN 0x02 -+ -+ byte unused1; -+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to -+ * detect irq on rising AND falling -+ * edges for corresponding GPIO_i -+ * if enabled (edge insensitive) -+ */ -+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense -+ * 0 for negedge sense if -+ * not configured for edge -+ * insensitive (see above) -+ * Lower 4 bits: Mask to enable change -+ * detection IRQ for corresponding -+ * GPIO_i -+ */ -+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits -+ * have changed (may set IRQ). -+ * read automatically clears bit -+ * Lower 4 bits are actual status -+ */ -+ -+ uint16 intMask; /* Same Bit defs for Mask and status */ -+ uint16 intStatus; -+#define DELTAIP 0x0001 -+#define TXUNDERR 0x0002 -+#define TXOVFERR 0x0004 -+#define TXFIFOTHOLD 0x0008 -+#define TXREADLATCH 0x0010 -+#define TXFIFOEMT 0x0020 -+#define RXUNDERR 0x0040 -+#define RXOVFERR 0x0080 -+#define RXTIMEOUT 0x0100 -+#define RXFIFOFULL 0x0200 -+#define RXFIFOTHOLD 0x0400 -+#define RXFIFONE 0x0800 -+#define RXFRAMERR 0x1000 -+#define RXPARERR 0x2000 -+#define RXBRK 0x4000 -+ -+ uint16 unused2; -+ uint16 Data; /* Write to TX, Read from RX */ -+ /* bits 11:8 are BRK,PAR,FRM errors */ -+ -+ uint32 unused3; -+ uint32 unused4; -+} Uart; -+ -+#define UART ((volatile Uart * const) UART_BASE) -+ -+typedef struct GpioControl { -+ uint32 unused0; -+ uint32 GPIODir; /* bits 7:0 */ -+ uint32 unused1; -+ uint32 GPIOio; /* bits 7:0 */ -+ uint32 LEDCtrl; -+#define LED3_STROBE 0x08000000 -+#define LED2_STROBE 0x04000000 -+#define LED1_STROBE 0x02000000 -+#define LED0_STROBE 0x01000000 -+#define LED_TEST 0x00010000 -+#define LED3_DISABLE_LINK_ACT 0x00008000 -+#define LED2_DISABLE_LINK_ACT 0x00004000 -+#define LED1_DISABLE_LINK_ACT 0x00002000 -+#define LED0_DISABLE_LINK_ACT 0x00001000 -+#define LED_INTERVAL_SET_MASK 0x00000f00 -+#define LED_INTERVAL_SET_320MS 0x00000500 -+#define LED_INTERVAL_SET_160MS 0x00000400 -+#define LED_INTERVAL_SET_80MS 0x00000300 -+#define LED_INTERVAL_SET_40MS 0x00000200 -+#define LED_INTERVAL_SET_20MS 0x00000100 -+#define LED3_ON 0x00000080 -+#define LED2_ON 0x00000040 -+#define LED1_ON 0x00000020 -+#define LED0_ON 0x00000010 -+#define LED3_ENABLE 0x00000008 -+#define LED2_ENABLE 0x00000004 -+#define LED1_ENABLE 0x00000002 -+#define LED0_ENABLE 0x00000001 -+ uint32 SpiSlaveCfg; -+#define SPI_SLAVE_RESET 0x00010000 -+#define SPI_RESTRICT 0x00000400 -+#define SPI_DELAY_DISABLE 0x00000200 -+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 -+#define SPI_SER_ADDR_CFG_MASK 0x0000000c -+#define SPI_MODE 0x00000001 -+ uint32 vRegConfig; -+} GpioControl; -+ -+#define GPIO ((volatile GpioControl * const) GPIO_BASE) -+ -+/* Number to mask conversion macro used for GPIODir and GPIOio */ -+#define GPIO_NUM_MAX_BITS_MASK 0x0f -+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) -+ -+/* -+** Spi Controller -+*/ -+ -+typedef struct SpiControl { -+ uint16 spiCmd; /* (0x0): SPI command */ -+#define SPI_CMD_START_IMMEDIATE 3 -+ -+#define SPI_CMD_COMMAND_SHIFT 0 -+#define SPI_CMD_DEVICE_ID_SHIFT 4 -+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 -+ -+ byte spiIntStatus; /* (0x2): SPI interrupt status */ -+ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */ -+ -+ byte spiIntMask; /* (0x4): SPI interrupt mask */ -+#define SPI_INTR_CMD_DONE 0x01 -+#define SPI_INTR_CLEAR_ALL 0x1f -+ -+ byte spiStatus; /* (0x5): SPI status */ -+ -+ byte spiClkCfg; /* (0x6): SPI clock configuration */ -+ -+ byte spiFillByte; /* (0x7): SPI fill byte */ -+ -+ byte unused0; -+ byte spiMsgTail; /* (0x9): msgtail */ -+ byte unused1; -+ byte spiRxTail; /* (0xB): rxtail */ -+ -+ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */ -+ -+ byte spiMsgCtl; /* (0x40) control byte */ -+#define HALF_DUPLEX_W 1 -+#define HALF_DUPLEX_R 2 -+#define SPI_MSG_TYPE_SHIFT 6 -+#define SPI_BYTE_CNT_SHIFT 0 -+ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */ -+ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */ -+ byte unused3[64]; /* (0xc0 - 0xff) reserved */ -+} SpiControl; -+ -+#define SPI ((volatile SpiControl * const) SPI_BASE) -+ -+/* -+** External Bus Interface -+*/ -+typedef struct EbiChipSelect { -+ uint32 base; /* base address in upper 24 bits */ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ uint32 config; -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_WREN 0x00000020 /* enable posted writes */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert something, -+ ** don't know what yet */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. use fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+} EbiChipSelect; -+ -+typedef struct MpiRegisters { -+ EbiChipSelect cs[1]; /* size chip select configuration */ -+} MpiRegisters; -+ -+#define MPI ((volatile MpiRegisters * const) MPI_BASE) -+ -+ -+#endif -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6345_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6345_intr.h ---- linux-2.6.19/arch/mips/bcm963xx/include/6345_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6345_intr.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,72 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __6345_INTR_H -+#define __6345_INTR_H -+ -+ -+/*=====================================================================*/ -+/* BCM6345 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6345 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+/* Internal peripheral interrupt IDs */ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) -+ -+/* DMA channel interrupt IDs */ -+#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) -+#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) -+#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) -+#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) -+#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) -+#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) -+#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) -+#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) -+#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) -+#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) -+#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) -+#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) -+ -+ -+#endif /* __BCM6345_H */ -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6345_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6345_map_part.h ---- linux-2.6.19/arch/mips/bcm963xx/include/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6345_map_part.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,163 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6345_MAP_H -+#define __BCM6345_MAP_H -+ -+ -+#include "bcmtypes.h" -+#include "6345_intr.h" -+ -+typedef struct IntControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define USB_CLK_EN 0x0100 -+#define EMAC_CLK_EN 0x0080 -+#define UART_CLK_EN 0x0008 -+#define CPU_CLK_EN 0x0001 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 4 -+#define EI_CLEAR_SHFT 8 -+#define EI_MASK_SHFT 12 -+#define EI_INSENS_SHFT 16 -+#define EI_LEVEL_SHFT 20 -+} IntControl; -+ -+#define INTC_BASE 0xfffe0000 -+#define PERF ((volatile IntControl * const) INTC_BASE) -+ -+#define TIMR_BASE 0xfffe0200 -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+ -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ byte config; -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define XMITBREAK 0x40 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ uint32 baudword; -+ -+ byte txf_levl; -+ byte rxf_levl; -+ byte fifocfg; -+ byte prog_out; -+ -+ byte unused1; -+ byte DeltaIPEdgeNoSense; -+ byte DeltaIPConfig_Mask; -+ byte DeltaIP_SyncIP; -+ uint16 intMask; -+ uint16 intStatus; -+#define TXUNDERR 0x0002 -+#define TXOVFERR 0x0004 -+#define TXFIFOEMT 0x0020 -+#define RXOVFERR 0x0080 -+#define RXFIFONE 0x0800 -+#define RXFRAMERR 0x1000 -+#define RXPARERR 0x2000 -+#define RXBRK 0x4000 -+ -+ uint16 unused2; -+ uint16 Data; -+ uint32 unused3; -+ uint32 unused4; -+} Uart; -+ -+#define UART_BASE 0xfffe0300 -+#define UART ((volatile Uart * const) UART_BASE) -+ -+typedef struct GpioControl { -+ uint16 unused0; -+ byte unused1; -+ byte TBusSel; -+ -+ uint16 unused2; -+ uint16 GPIODir; -+ byte unused3; -+ byte Leds; -+ uint16 GPIOio; -+ -+ uint32 UartCtl; -+} GpioControl; -+ -+#define GPIO_BASE 0xfffe0400 -+#define GPIO ((volatile GpioControl * const) GPIO_BASE) -+ -+#define GPIO_NUM_MAX_BITS_MASK 0x0f -+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) -+ -+ -+#endif -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6348_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/6348_intr.h ---- linux-2.6.19/arch/mips/bcm963xx/include/6348_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6348_intr.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,74 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __6348_INTR_H -+#define __6348_INTR_H -+ -+ -+/*=====================================================================*/ -+/* BCM6348 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6348 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) -+#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) -+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -+#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) -+#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) -+#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) -+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) -+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) -+#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) -+#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) -+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) -+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) -+#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) -+#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) -+#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) -+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) -+ -+ -+#endif /* __BCM6348_H */ -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/6348_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/6348_map_part.h ---- linux-2.6.19/arch/mips/bcm963xx/include/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/6348_map_part.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,500 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6348_MAP_H -+#define __BCM6348_MAP_H -+ -+#include "bcmtypes.h" -+ -+#define PERF_BASE 0xfffe0000 -+#define TIMR_BASE 0xfffe0200 -+#define UART_BASE 0xfffe0300 -+#define GPIO_BASE 0xfffe0400 -+#define MPI_BASE 0xfffe2000 /* MPI control registers */ -+#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ -+#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ -+ -+typedef struct PerfControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define EMAC_CLK_EN 0x0010 -+#define SAR_CLK_EN 0x0020 -+#define USBS_CLK_EN 0x0040 -+#define USBH_CLK_EN 0x0100 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 5 -+#define EI_CLEAR_SHFT 10 -+#define EI_MASK_SHFT 15 -+#define EI_INSENS_SHFT 20 -+#define EI_LEVEL_SHFT 25 -+ -+ uint32 unused[4]; /* (18) */ -+ uint32 BlockSoftReset; /* (28) */ -+#define BSR_SPI 0x00000001 -+#define BSR_EMAC 0x00000004 -+#define BSR_USBH 0x00000008 -+#define BSR_USBS 0x00000010 -+#define BSR_ADSL 0x00000020 -+#define BSR_DMAMEM 0x00000040 -+#define BSR_SAR 0x00000080 -+#define BSR_ACLC 0x00000100 -+#define BSR_ADSL_MIPS_PLL 0x00000400 -+#define BSR_ALL_BLOCKS \ -+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ -+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -+ uint32 unused2[2]; /* (2c) */ -+ uint32 PllStrap; /* (34) */ -+#define PLL_N1_SHFT 20 -+#define PLL_N1_MASK (7<<PLL_N1_SHFT) -+#define PLL_N2_SHFT 15 -+#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT) -+#define PLL_M1_REF_SHFT 12 -+#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT) -+#define PLL_M2_REF_SHFT 9 -+#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT) -+#define PLL_M1_CPU_SHFT 6 -+#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT) -+#define PLL_M1_BUS_SHFT 3 -+#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT) -+#define PLL_M2_BUS_SHFT 0 -+#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT) -+} PerfControl; -+ -+#define PERF ((volatile PerfControl * const) PERF_BASE) -+ -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+ -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ -+ byte config; -+#define XMITBREAK 0x40 -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ /* 4-LSBS represent STOP bits/char -+ * in 1/8 bit-time intervals. Zero -+ * represents 1/8 stop bit interval. -+ * Fifteen represents 2 stop bits. -+ */ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ /* 5-bit TimeoutCnt is in low bits of this register. -+ * This count represents the number of characters -+ * idle times before setting receive Irq when below threshold -+ */ -+ uint32 baudword; -+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate -+ */ -+ -+ byte txf_levl; /* Read-only fifo depth */ -+ byte rxf_levl; /* Read-only fifo depth */ -+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are -+ * RxThreshold. Irq can be asserted -+ * when rx fifo> thresh, txfifo<thresh -+ */ -+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) -+ * if these bits are also enabled to GPIO_o -+ */ -+#define DTREN 0x01 -+#define RTSEN 0x02 -+ -+ byte unused1; -+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to -+ * detect irq on rising AND falling -+ * edges for corresponding GPIO_i -+ * if enabled (edge insensitive) -+ */ -+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense -+ * 0 for negedge sense if -+ * not configured for edge -+ * insensitive (see above) -+ * Lower 4 bits: Mask to enable change -+ * detection IRQ for corresponding -+ * GPIO_i -+ */ -+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits -+ * have changed (may set IRQ). -+ * read automatically clears bit -+ * Lower 4 bits are actual status -+ */ -+ -+ uint16 intMask; /* Same Bit defs for Mask and status */ -+ uint16 intStatus; -+#define DELTAIP 0x0001 -+#define TXUNDERR 0x0002 -+#define TXOVFERR 0x0004 -+#define TXFIFOTHOLD 0x0008 -+#define TXREADLATCH 0x0010 -+#define TXFIFOEMT 0x0020 -+#define RXUNDERR 0x0040 -+#define RXOVFERR 0x0080 -+#define RXTIMEOUT 0x0100 -+#define RXFIFOFULL 0x0200 -+#define RXFIFOTHOLD 0x0400 -+#define RXFIFONE 0x0800 -+#define RXFRAMERR 0x1000 -+#define RXPARERR 0x2000 -+#define RXBRK 0x4000 -+ -+ uint16 unused2; -+ uint16 Data; /* Write to TX, Read from RX */ -+ /* bits 11:8 are BRK,PAR,FRM errors */ -+ -+ uint32 unused3; -+ uint32 unused4; -+} Uart; -+ -+#define UART ((volatile Uart * const) UART_BASE) -+ -+typedef struct GpioControl { -+ uint32 GPIODir_high; /* bits 36:32 */ -+ uint32 GPIODir; /* bits 31:00 */ -+ uint32 GPIOio_high; /* bits 36:32 */ -+ uint32 GPIOio; /* bits 31:00 */ -+ uint32 LEDCtrl; -+#define LED3_STROBE 0x08000000 -+#define LED2_STROBE 0x04000000 -+#define LED1_STROBE 0x02000000 -+#define LED0_STROBE 0x01000000 -+#define LED_TEST 0x00010000 -+#define LED3_DISABLE_LINK_ACT 0x00008000 -+#define LED2_DISABLE_LINK_ACT 0x00004000 -+#define LED1_DISABLE_LINK_ACT 0x00002000 -+#define LED0_DISABLE_LINK_ACT 0x00001000 -+#define LED_INTERVAL_SET_MASK 0x00000f00 -+#define LED_INTERVAL_SET_320MS 0x00000500 -+#define LED_INTERVAL_SET_160MS 0x00000400 -+#define LED_INTERVAL_SET_80MS 0x00000300 -+#define LED_INTERVAL_SET_40MS 0x00000200 -+#define LED_INTERVAL_SET_20MS 0x00000100 -+#define LED3_ON 0x00000080 -+#define LED2_ON 0x00000040 -+#define LED1_ON 0x00000020 -+#define LED0_ON 0x00000010 -+#define LED3_ENABLE 0x00000008 -+#define LED2_ENABLE 0x00000004 -+#define LED1_ENABLE 0x00000002 -+#define LED0_ENABLE 0x00000001 -+ uint32 SpiSlaveCfg; -+#define SPI_SLAVE_RESET 0x00010000 -+#define SPI_RESTRICT 0x00000400 -+#define SPI_DELAY_DISABLE 0x00000200 -+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 -+#define SPI_SER_ADDR_CFG_MASK 0x0000000c -+#define SPI_MODE 0x00000001 -+ uint32 GPIOMode; -+#define GROUP4_DIAG 0x00090000 -+#define GROUP4_UTOPIA 0x00080000 -+#define GROUP4_LEGACY_LED 0x00030000 -+#define GROUP4_MII_SNOOP 0x00020000 -+#define GROUP4_EXT_EPHY 0x00010000 -+#define GROUP3_DIAG 0x00009000 -+#define GROUP3_UTOPIA 0x00008000 -+#define GROUP3_EXT_MII 0x00007000 -+#define GROUP2_DIAG 0x00000900 -+#define GROUP2_PCI 0x00000500 -+#define GROUP1_DIAG 0x00000090 -+#define GROUP1_UTOPIA 0x00000080 -+#define GROUP1_SPI_UART 0x00000060 -+#define GROUP1_SPI_MASTER 0x00000060 -+#define GROUP1_MII_PCCARD 0x00000040 -+#define GROUP1_MII_SNOOP 0x00000020 -+#define GROUP1_EXT_EPHY 0x00000010 -+#define GROUP0_DIAG 0x00000009 -+#define GROUP0_EXT_MII 0x00000007 -+ -+} GpioControl; -+ -+#define GPIO ((volatile GpioControl * const) GPIO_BASE) -+ -+/* Number to mask conversion macro used for GPIODir and GPIOio */ -+#define GPIO_NUM_TOTAL_BITS_MASK 0x3f -+#define GPIO_NUM_MAX_BITS_MASK 0x1f -+#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) ) -+ -+/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */ -+#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07 -+#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) -+ -+ -+/* -+** External Bus Interface -+*/ -+typedef struct EbiChipSelect { -+ uint32 base; /* base address in upper 24 bits */ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ uint32 config; -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_WREN 0x00000020 /* enable posted writes */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert something, -+ ** don't know what yet */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. use fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+} EbiChipSelect; -+ -+typedef struct MpiRegisters { -+ EbiChipSelect cs[7]; /* size chip select configuration */ -+#define EBI_CS0_BASE 0 -+#define EBI_CS1_BASE 1 -+#define EBI_CS2_BASE 2 -+#define EBI_CS3_BASE 3 -+#define PCMCIA_COMMON_BASE 4 -+#define PCMCIA_ATTRIBUTE_BASE 5 -+#define PCMCIA_IO_BASE 6 -+ uint32 unused0[2]; /* reserved */ -+ uint32 ebi_control; /* ebi control */ -+ uint32 unused1[4]; /* reserved */ -+#define EBI_ACCESS_TIMEOUT 0x000007FF -+ uint32 pcmcia_cntl1; /* pcmcia control 1 */ -+#define PCCARD_CARD_RESET 0x00040000 -+#define CARDBUS_ENABLE 0x00008000 -+#define PCMCIA_ENABLE 0x00004000 -+#define PCMCIA_GPIO_ENABLE 0x00002000 -+#define CARDBUS_IDSEL 0x00001F00 -+#define VS2_OEN 0x00000080 -+#define VS1_OEN 0x00000040 -+#define VS2_OUT 0x00000020 -+#define VS1_OUT 0x00000010 -+#define VS2_IN 0x00000008 -+#define VS1_IN 0x00000004 -+#define CD2_IN 0x00000002 -+#define CD1_IN 0x00000001 -+#define VS_MASK 0x0000000C -+#define CD_MASK 0x00000003 -+ uint32 unused2; /* reserved */ -+ uint32 pcmcia_cntl2; /* pcmcia control 2 */ -+#define PCMCIA_BYTESWAP_DIS 0x00000002 -+#define PCMCIA_HALFWORD_EN 0x00000001 -+#define RW_ACTIVE_CNT_BIT 2 -+#define INACTIVE_CNT_BIT 8 -+#define CE_SETUP_CNT_BIT 16 -+#define CE_HOLD_CNT_BIT 24 -+ uint32 unused3[40]; /* reserved */ -+ -+ uint32 sp0range; /* PCI to internal system bus address space */ -+ uint32 sp0remap; -+ uint32 sp0cfg; -+ uint32 sp1range; -+ uint32 sp1remap; -+ uint32 sp1cfg; -+ -+ uint32 EndianCfg; -+ -+ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ -+#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ -+#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ -+#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ -+#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ -+#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ -+#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ -+ -+ uint32 l2pmrange1; /* internal system bus to PCI memory space */ -+#define PCI_SIZE_64K 0xFFFF0000 -+#define PCI_SIZE_128K 0xFFFE0000 -+#define PCI_SIZE_256K 0xFFFC0000 -+#define PCI_SIZE_512K 0xFFF80000 -+#define PCI_SIZE_1M 0xFFF00000 -+#define PCI_SIZE_2M 0xFFE00000 -+#define PCI_SIZE_4M 0xFFC00000 -+#define PCI_SIZE_8M 0xFF800000 -+#define PCI_SIZE_16M 0xFF000000 -+#define PCI_SIZE_32M 0xFE000000 -+ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ -+ uint32 l2pmremap1; -+#define CARDBUS_MEM 0x00000004 -+#define MEM_WINDOW_EN 0x00000001 -+ uint32 l2pmrange2; -+ uint32 l2pmbase2; -+ uint32 l2pmremap2; -+ uint32 l2piorange; /* internal system bus to PCI I/O space */ -+ uint32 l2piobase; -+ uint32 l2pioremap; -+ -+ uint32 pcimodesel; -+#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 -+#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ -+#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ -+ -+ uint32 pciintstat; /* PCI interrupt mask/status */ -+#define MAILBOX1_SENT 0x08 -+#define MAILBOX0_SENT 0x04 -+#define MAILBOX1_MSG_RCV 0x02 -+#define MAILBOX0_MSG_RCV 0x01 -+ uint32 locbuscntrl; /* internal system bus control */ -+#define DIR_U2P_NOSWAP 0x00000002 -+#define EN_PCI_GPIO 0x00000001 -+ uint32 locintstat; /* internal system bus interrupt mask/status */ -+#define CSERR 0x0200 -+#define SERR 0x0100 -+#define EXT_PCI_INT 0x0080 -+#define DIR_FAILED 0x0040 -+#define DIR_COMPLETE 0x0020 -+#define PCI_CFG 0x0010 -+ uint32 unused5[7]; -+ -+ uint32 mailbox0; -+ uint32 mailbox1; -+ -+ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ -+#define PCI_CFG_REG_WRITE_EN 0x00000080 -+#define PCI_CFG_ADDR 0x0000003C -+ uint32 pcicfgdata; /* internal system bus PCI configuration data */ -+ -+ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ -+#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ -+#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ -+#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ -+#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ -+ uint32 locch2intStat; -+#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ -+#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ -+#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ -+ uint32 locch2intMask; -+ uint32 unused6; -+ uint32 locch2descaddr; -+ uint32 locch2status1; -+#define LOCAL_DESC_STATE 0xE0000000 -+#define PCI_DESC_STATE 0x1C000000 -+#define BYTE_DONE 0x03FFC000 -+#define RING_ADDR 0x00003FFF -+ uint32 locch2status2; -+#define BUFPTR_OFFSET 0x1FFF0000 -+#define PCI_MASTER_STATE 0x000000C0 -+#define LOC_MASTER_STATE 0x00000038 -+#define CONTROL_STATE 0x00000007 -+ uint32 unused7; -+ -+ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ -+#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ -+#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ -+ uint32 locch1intstat; -+ uint32 locch1intmask; -+ uint32 unused8; -+ uint32 locch1descaddr; -+ uint32 locch1status1; -+ uint32 locch1status2; -+ uint32 unused9; -+ -+ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ -+ uint32 pcich1intstat; -+ uint32 pcich1intmask; -+ uint32 pcich1descaddr; -+ uint32 pcich1status1; -+ uint32 pcich1status2; -+ -+ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ -+ uint32 pcich2intstat; -+ uint32 pcich2intmask; -+ uint32 pcich2descaddr; -+ uint32 pcich2status1; -+ uint32 pcich2status2; -+ -+ uint32 perm_id; /* permanent device and vendor id */ -+ uint32 perm_rev; /* permanent revision id */ -+} MpiRegisters; -+ -+#define MPI ((volatile MpiRegisters * const) MPI_BASE) -+ -+/* PCI configuration address space start offset 0x40 */ -+#define BRCM_PCI_CONFIG_TIMER 0x40 -+#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 -+#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF -+ -+/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ -+#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ -+#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ -+ -+#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) -+ -+#endif -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmTag.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmTag.h ---- linux-2.6.19/arch/mips/bcm963xx/include/bcmTag.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmTag.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,153 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+//************************************************************************************** -+// File Name : bcmTag.h -+// -+// Description: add tag with validation system to the firmware image file to be uploaded -+// via http -+// -+// Created : 02/28/2002 seanl -+//************************************************************************************** -+ -+#ifndef _BCMTAG_H_ -+#define _BCMTAG_H_ -+ -+ -+#define BCM_SIG_1 "Broadcom Corporation" -+#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. -+ -+#define BCM_TAG_VER "6" -+#define BCM_TAG_VER_LAST "26" -+ -+// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars -+#define TAG_LEN 256 -+#define TAG_VER_LEN 4 -+#define SIG_LEN 20 -+#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID -+#define CHIP_ID_LEN 6 -+#define IMAGE_LEN 10 -+#define ADDRESS_LEN 12 -+#define FLAG_LEN 2 -+#define TOKEN_LEN 20 -+#define BOARD_ID_LEN 16 -+#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ -+ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) -+ -+ -+// TAG for downloadable image (kernel plus file system) -+typedef struct _FILE_TAG -+{ -+ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. -+ unsigned char signiture_1[SIG_LEN]; // text line for company info -+ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) -+ unsigned char chipId[CHIP_ID_LEN]; // chip id -+ unsigned char boardId[BOARD_ID_LEN]; // board id -+ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host -+ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length -+ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address -+ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. -+ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address -+ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. -+ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address -+ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. -+ unsigned char dualImage[FLAG_LEN]; // if 1, dual image -+ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active -+ unsigned char reserved[RESERVED_LEN]; // reserved for later use -+ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for -+ // now will be 4 unsigned char crc -+ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) -+} FILE_TAG, *PFILE_TAG; -+ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC_LEN 4 -+ -+// only included if for bcmTag.exe program -+#ifdef BCMTAG_EXE_USE -+ -+static unsigned long Crc32_table[256] = { -+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, -+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, -+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, -+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, -+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, -+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, -+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, -+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, -+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, -+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, -+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, -+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, -+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, -+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, -+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, -+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, -+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, -+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, -+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, -+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, -+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, -+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, -+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, -+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, -+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, -+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, -+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, -+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, -+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, -+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, -+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, -+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, -+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, -+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, -+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, -+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, -+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, -+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, -+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, -+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, -+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, -+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, -+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, -+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, -+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, -+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, -+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, -+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, -+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, -+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, -+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, -+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, -+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, -+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, -+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, -+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, -+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, -+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, -+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, -+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, -+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, -+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, -+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, -+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -+}; -+#endif // BCMTAG_USE -+ -+ -+#endif // _BCMTAG_H_ -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcm_intr.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_intr.h ---- linux-2.6.19/arch/mips/bcm963xx/include/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_intr.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,59 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM_INTR_H -+#define __BCM_INTR_H -+ -+#ifdef __cplusplus -+ extern "C" { -+#endif -+ -+#if defined(CONFIG_BCM96338) -+#include <6338_intr.h> -+#endif -+#if defined(CONFIG_BCM96345) -+#include <6345_intr.h> -+#endif -+#if defined(CONFIG_BCM96348) -+#include <6348_intr.h> -+#endif -+ -+/* defines */ -+struct pt_regs; -+typedef int (*FN_HANDLER) (int, void *); -+ -+/* prototypes */ -+extern void enable_brcm_irq(unsigned int irq); -+extern void disable_brcm_irq(unsigned int irq); -+extern int request_external_irq(unsigned int irq, -+ FN_HANDLER handler, unsigned long irqflags, -+ const char * devname, void *dev_id); -+extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, -+ unsigned int interruptId); -+extern void dump_intr_regs(void); -+ -+/* compatibility definitions */ -+#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) -+#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+#endif -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcm_map_part.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_map_part.h ---- linux-2.6.19/arch/mips/bcm963xx/include/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcm_map_part.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,34 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM_MAP_PART_H -+#define __BCM_MAP_PART_H -+ -+#if defined(CONFIG_BCM96338) -+#include <6338_map_part.h> -+#endif -+#if defined(CONFIG_BCM96345) -+#include <6345_map_part.h> -+#endif -+#if defined(CONFIG_BCM96348) -+#include <6348_map_part.h> -+#endif -+ -+#endif -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmpci.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmpci.h ---- linux-2.6.19/arch/mips/bcm963xx/include/bcmpci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmpci.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,87 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+// -+// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition -+// -+#ifndef BCMPCI_H -+#define BCMPCI_H -+ -+/* Memory window in internal system bus address space */ -+#define BCM_PCI_MEM_BASE 0x08000000 -+/* IO window in internal system bus address space */ -+#define BCM_PCI_IO_BASE 0x0C000000 -+ -+#define BCM_PCI_ADDR_MASK 0x1fffffff -+ -+/* Memory window size (range) */ -+#define BCM_PCI_MEM_SIZE_16MB 0x01000000 -+/* IO window size (range) */ -+#define BCM_PCI_IO_SIZE_64KB 0x00010000 -+ -+/* PCI Configuration and I/O space acesss */ -+#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) -+ -+/* fake USB PCI slot */ -+#define USB_HOST_SLOT 9 -+#define USB_BAR0_MEM_SIZE 0x0800 -+ -+#define BCM_HOST_MEM_SPACE1 0x10000000 -+#define BCM_HOST_MEM_SPACE2 0x00000000 -+ -+/* -+ * EBI bus clock is 33MHz and share with PCI bus -+ * each clock cycle is 30ns. -+ */ -+/* attribute memory access wait cnt for 4306 */ -+#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns -+#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns -+#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) -+#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns -+ -+/* common memory access wait cnt for 4306 */ -+#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns -+#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns -+#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) -+#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns -+ -+#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also -+#define PCCARD_VCC_33V 0x00010000 -+#define PCCARD_VCC_50V 0x00020000 -+ -+typedef enum { -+ MPI_CARDTYPE_NONE, // No Card in slot -+ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot -+ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot -+} CardType; -+ -+#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus -+ -+#define pcmciaAttrOffset 0x00200000 -+#define pcmciaMemOffset 0x00000000 -+// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. -+#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) -+// Base Address is that mapped into the MPI ChipSelect registers. -+// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. -+#define pcmciaBase 0xbf000000 -+#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) -+#define pcmciaMem (pcmciaMemOffset | pcmciaBase) -+#define pcmciaIo (pcmciaIoOffset | pcmciaBase) -+ -+#endif -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/bcmtypes.h linux-2.6.19.new/arch/mips/bcm963xx/include/bcmtypes.h ---- linux-2.6.19/arch/mips/bcm963xx/include/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/bcmtypes.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,160 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+// -+// bcmtypes.h - misc useful typedefs -+// -+#ifndef BCMTYPES_H -+#define BCMTYPES_H -+ -+// These are also defined in typedefs.h in the application area, so I need to -+// protect against re-definition. -+ -+#ifndef _TYPEDEFS_H_ -+typedef unsigned char uint8; -+typedef unsigned short uint16; -+typedef unsigned long uint32; -+typedef signed char int8; -+typedef signed short int16; -+typedef signed long int32; -+#endif -+ -+typedef unsigned char byte; -+// typedef unsigned long sem_t; -+ -+typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; -+typedef signed long LONG,*PLONG; -+ -+typedef unsigned int *PUINT; -+typedef signed int INT; -+ -+typedef unsigned short *PUSHORT; -+typedef signed short SHORT,*PSHORT; -+typedef unsigned short WORD,*PWORD; -+ -+typedef unsigned char *PUCHAR; -+typedef signed char *PCHAR; -+ -+typedef void *PVOID; -+ -+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; -+ -+typedef unsigned char BYTE,*PBYTE; -+ -+//#ifndef __GNUC__ -+//The following has been defined in Vxworks internally: vxTypesOld.h -+//redefine under vxworks will cause error -+typedef signed int *PINT; -+ -+typedef signed char INT8; -+typedef signed short INT16; -+typedef signed long INT32; -+ -+typedef unsigned char UINT8; -+typedef unsigned short UINT16; -+typedef unsigned long UINT32; -+ -+typedef unsigned char UCHAR; -+typedef unsigned short USHORT; -+typedef unsigned int UINT; -+typedef unsigned long ULONG; -+ -+typedef void VOID; -+typedef unsigned char BOOL; -+ -+//#endif /* __GNUC__ */ -+ -+ -+// These are also defined in typedefs.h in the application area, so I need to -+// protect against re-definition. -+#ifndef TYPEDEFS_H -+ -+// Maximum and minimum values for a signed 16 bit integer. -+#define MAX_INT16 32767 -+#define MIN_INT16 -32768 -+ -+// Useful for true/false return values. This uses the -+// Taligent notation (k for constant). -+typedef enum -+{ -+ kFalse = 0, -+ kTrue = 1 -+} Bool; -+ -+#endif -+ -+/* macros to protect against unaligned accesses */ -+ -+#if 0 -+/* first arg is an address, second is a value */ -+#define PUT16( a, d ) { \ -+ *((byte *)a) = (byte)((d)>>8); \ -+ *(((byte *)a)+1) = (byte)(d); \ -+} -+ -+#define PUT32( a, d ) { \ -+ *((byte *)a) = (byte)((d)>>24); \ -+ *(((byte *)a)+1) = (byte)((d)>>16); \ -+ *(((byte *)a)+2) = (byte)((d)>>8); \ -+ *(((byte *)a)+3) = (byte)(d); \ -+} -+ -+/* first arg is an address, returns a value */ -+#define GET16( a ) ( \ -+ (*((byte *)a) << 8) | \ -+ (*(((byte *)a)+1)) \ -+) -+ -+#define GET32( a ) ( \ -+ (*((byte *)a) << 24) | \ -+ (*(((byte *)a)+1) << 16) | \ -+ (*(((byte *)a)+2) << 8) | \ -+ (*(((byte *)a)+3)) \ -+) -+#endif -+ -+#ifndef YES -+#define YES 1 -+#endif -+ -+#ifndef NO -+#define NO 0 -+#endif -+ -+#ifndef IN -+#define IN -+#endif -+ -+#ifndef OUT -+#define OUT -+#endif -+ -+#ifndef TRUE -+#define TRUE 1 -+#endif -+ -+#ifndef FALSE -+#define FALSE 0 -+#endif -+ -+#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) -+#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) -+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) -+ -+#endif -diff -urN linux-2.6.19/arch/mips/bcm963xx/include/board.h linux-2.6.19.new/arch/mips/bcm963xx/include/board.h ---- linux-2.6.19/arch/mips/bcm963xx/include/board.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/include/board.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,373 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: board.h */ -+/* DATE: 97/02/18 */ -+/* PURPOSE: Board specific information. This module should include */ -+/* all base device addresses and board specific macros. */ -+/* */ -+/***********************************************************************/ -+#ifndef _BOARD_H -+#define _BOARD_H -+ -+/*****************************************************************************/ -+/* Misc board definitions */ -+/*****************************************************************************/ -+ -+#define DYING_GASP_API -+ -+/*****************************************************************************/ -+/* Physical Memory Map */ -+/*****************************************************************************/ -+ -+#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ -+#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ -+ -+/*****************************************************************************/ -+/* Note that the addresses above are physical addresses and that programs */ -+/* have to use converted addresses defined below: */ -+/*****************************************************************************/ -+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ -+ -+/*****************************************************************************/ -+/* Select the PLL value to get the desired CPU clock frequency. */ -+/* */ -+/* */ -+/*****************************************************************************/ -+#define FPERIPH 50000000 -+ -+#define ONEK 1024 -+#define BLK64K (64*ONEK) -+#define FLASH45_BLKS_BOOT_ROM 1 -+#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) -+#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ -+ -+/*****************************************************************************/ -+/* Note that the addresses above are physical addresses and that programs */ -+/* have to use converted addresses defined below: */ -+/*****************************************************************************/ -+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ -+ -+/*****************************************************************************/ -+/* Select the PLL value to get the desired CPU clock frequency. */ -+/* */ -+/* */ -+/*****************************************************************************/ -+#define FPERIPH 50000000 -+ -+#define SDRAM_TYPE_ADDRESS_OFFSET 16 -+#define NVRAM_DATA_OFFSET 0x0580 -+#define NVRAM_DATA_ID 0x0f1e2d3c -+#define BOARD_SDRAM_TYPE *(unsigned long *) \ -+ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) -+ -+#define ONEK 1024 -+#define BLK64K (64*ONEK) -+ -+// nvram and psi flash definitions for 45 -+#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram -+#define NVRAM_PSI_DEFAULT 24 // default psi in K byes -+ -+/*****************************************************************************/ -+/* NVRAM Offset and definition */ -+/*****************************************************************************/ -+ -+#define NVRAM_VERSION_NUMBER 2 -+#define NVRAM_VERSION_NUMBER_ADDRESS 0 -+ -+#define NVRAM_BOOTLINE_LEN 256 -+#define NVRAM_BOARD_ID_STRING_LEN 16 -+#define NVRAM_MAC_ADDRESS_LEN 6 -+#define NVRAM_MAC_COUNT_MAX 32 -+ -+/*****************************************************************************/ -+/* Misc Offsets */ -+/*****************************************************************************/ -+ -+#define CFE_VERSION_OFFSET 0x0570 -+#define CFE_VERSION_MARK_SIZE 5 -+#define CFE_VERSION_SIZE 5 -+ -+typedef struct -+{ -+ unsigned long ulVersion; -+ char szBootline[NVRAM_BOOTLINE_LEN]; -+ char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; -+ unsigned long ulReserved1[2]; -+ unsigned long ulNumMacAddrs; -+ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ char chReserved[2]; -+ unsigned long ulCheckSum; -+} NVRAM_DATA, *PNVRAM_DATA; -+ -+ -+/*****************************************************************************/ -+/* board ioctl calls for flash, led and some other utilities */ -+/*****************************************************************************/ -+ -+ -+/* Defines. for board driver */ -+#define BOARD_IOCTL_MAGIC 'B' -+#define BOARD_DRV_MAJOR 206 -+ -+#define MAC_ADDRESS_ANY (unsigned long) -1 -+ -+#define BOARD_IOCTL_FLASH_INIT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_FLASH_WRITE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_FLASH_READ \ -+ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_NR_PAGES \ -+ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_DUMP_ADDR \ -+ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_MEMORY \ -+ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_MIPS_SOFT_RESET \ -+ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_LED_CTRL \ -+ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_ID \ -+ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_PSI_SIZE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_SDRAM_SIZE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_MONITOR_FD \ -+ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ -+ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_BOOTLINE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_BOOTLINE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_CHIP_ID \ -+ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_NUM_ENET \ -+ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_CFE_VER \ -+ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_ENET_CFG \ -+ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_SES_LED \ -+ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) -+ -+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12 -+#define RESET_BUTTON_UP 1 -+#define RESET_BUTTON_PRESSDOWN 0 -+#define BOARD_IOCTL_GET_RESETHOLD \ -+ _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS) -+//>>JUNHON, 2004/09/15 -+ -+// for the action in BOARD_IOCTL_PARMS for flash operation -+typedef enum -+{ -+ PERSISTENT, -+ NVRAM, -+ BCM_IMAGE_CFE, -+ BCM_IMAGE_FS, -+ BCM_IMAGE_KERNEL, -+ BCM_IMAGE_WHOLE, -+ SCRATCH_PAD, -+ FLASH_SIZE, -+} BOARD_IOCTL_ACTION; -+ -+ -+typedef struct boardIoctParms -+{ -+ char *string; -+ char *buf; -+ int strLen; -+ int offset; -+ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ -+ int result; -+} BOARD_IOCTL_PARMS; -+ -+ -+// LED defines -+typedef enum -+{ -+ kLedAdsl, -+ kLedWireless, -+ kLedUsb, -+ kLedHpna, -+ kLedWanData, -+ kLedPPP, -+ kLedVoip, -+ kLedSes, -+ kLedLan, -+ kLedSelfTest, -+ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. -+} BOARD_LED_NAME; -+ -+typedef enum -+{ -+ kLedStateOff, /* turn led off */ -+ kLedStateOn, /* turn led on */ -+ kLedStateFail, /* turn led on red */ -+ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ -+ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ -+ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ -+} BOARD_LED_STATE; -+ -+ -+// virtual and physical map pair defined in board.c -+typedef struct ledmappair -+{ -+ BOARD_LED_NAME ledName; // virtual led name -+ BOARD_LED_STATE ledInitState; // initial led state when the board boots. -+ unsigned short ledMask; // physical GPIO pin mask -+ unsigned short ledActiveLow; // reset bit to turn on LED -+ unsigned short ledMaskFail; // physical GPIO pin mask for state failure -+ unsigned short ledActiveLowFail;// reset bit to turn on LED -+} LED_MAP_PAIR, *PLED_MAP_PAIR; -+ -+typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); -+ -+/* Flash storage address information that is determined by the flash driver. */ -+typedef struct flashaddrinfo -+{ -+ int flash_persistent_start_blk; -+ int flash_persistent_number_blk; -+ int flash_persistent_length; -+ unsigned long flash_persistent_blk_offset; -+ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) -+ int flash_scratch_pad_number_blk; -+ int flash_scratch_pad_length; -+ unsigned long flash_scratch_pad_blk_offset; -+ int flash_nvram_start_blk; -+ int flash_nvram_number_blk; -+ int flash_nvram_length; -+ unsigned long flash_nvram_blk_offset; -+} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; -+ -+// scratch pad defines -+/* SP - Persisten Scratch Pad format: -+ sp header : 32 bytes -+ tokenId-1 : 8 bytes -+ tokenId-1 len : 4 bytes -+ tokenId-1 data -+ .... -+ tokenId-n : 8 bytes -+ tokenId-n len : 4 bytes -+ tokenId-n data -+*/ -+ -+#define MAGIC_NUM_LEN 8 -+#define MAGIC_NUMBER "gOGoBrCm" -+#define TOKEN_NAME_LEN 16 -+#define SP_VERSION 1 -+#define SP_MAX_LEN 8 * 1024 // 8k buf before psi -+#define SP_RESERVERD 16 -+ -+typedef struct _SP_HEADER -+{ -+ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number -+ int SPVersion; // version number -+ int SPUsedLen; // used sp len -+ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes -+} SP_HEADER, *PSP_HEADER; -+ -+typedef struct _TOKEN_DEF -+{ -+ char tokenName[TOKEN_NAME_LEN]; -+ int tokenLen; -+} SP_TOKEN, *PSP_TOKEN; -+ -+ -+/*****************************************************************************/ -+/* Function Prototypes */ -+/*****************************************************************************/ -+#if !defined(__ASM_ASM_H) -+void dumpaddr( unsigned char *pAddr, int nLen ); -+ -+int kerSysNvRamGet(char *string, int strLen, int offset); -+int kerSysNvRamSet(char *string, int strLen, int offset); -+int kerSysPersistentGet(char *string, int strLen, int offset); -+int kerSysPersistentSet(char *string, int strLen, int offset); -+int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); -+int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); -+int kerSysBcmImageSet( int flash_start_addr, char *string, int size); -+int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); -+int kerSysReleaseMacAddress( unsigned char *pucaAddr ); -+int kerSysGetSdramSize( void ); -+void kerSysGetBootline(char *string, int strLen); -+void kerSysSetBootline(char *string, int strLen); -+void kerSysMipsSoftReset(void); -+void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -+void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); -+int kerSysFlashSizeGet(void); -+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); -+void kerSysDeregisterDyingGaspHandler(char *devname); -+void kerSysWakeupMonitorTask( void ); -+#endif -+ -+#define BOOT_CFE 0 -+#define BOOT_REDBOOT 1 -+ -+extern int boot_loader_type; -+ -+#endif /* _BOARD_H */ -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/int-handler.S linux-2.6.19.new/arch/mips/bcm963xx/int-handler.S ---- linux-2.6.19/arch/mips/bcm963xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/int-handler.S 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,59 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Generic interrupt handler for Broadcom MIPS boards -+ */ -+ -+#include <linux/autoconf.h> -+ -+#include <asm/asm.h> -+#include <asm/mipsregs.h> -+#include <asm/regdef.h> -+#include <asm/stackframe.h> -+ -+/* -+ * MIPS IRQ Source -+ * -------- ------ -+ * 0 Software (ignored) -+ * 1 Software (ignored) -+ * 2 Combined hardware interrupt (hw0) -+ * 3 Hardware -+ * 4 Hardware -+ * 5 Hardware -+ * 6 Hardware -+ * 7 R4k timer -+ */ -+ -+ .text -+ .set noreorder -+ .set noat -+ .align 5 -+ NESTED(brcmIRQ, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ .set noreorder -+ .set at -+ -+ jal plat_irq_dispatch -+ move a0, sp -+ -+ j ret_from_irq -+ nop -+ -+ END(brcmIRQ) -diff -urN linux-2.6.19/arch/mips/bcm963xx/irq.c linux-2.6.19.new/arch/mips/bcm963xx/irq.c ---- linux-2.6.19/arch/mips/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/irq.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,256 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Interrupt control functions for Broadcom 963xx MIPS boards -+ */ -+ -+#include <asm/atomic.h> -+ -+#include <linux/delay.h> -+#include <linux/init.h> -+#include <linux/ioport.h> -+#include <linux/irq.h> -+#include <linux/interrupt.h> -+#include <linux/kernel.h> -+#include <linux/slab.h> -+#include <linux/module.h> -+ -+#include <asm/irq.h> -+#include <asm/mipsregs.h> -+#include <asm/addrspace.h> -+#include <asm/signal.h> -+#include <bcm_map_part.h> -+#include <bcm_intr.h> -+ -+static void irq_dispatch_int(struct pt_regs *regs) -+{ -+ unsigned int pendingIrqs; -+ static unsigned int irqBit; -+ static unsigned int isrNumber = 31; -+ -+ pendingIrqs = PERF->IrqStatus & PERF->IrqMask; -+ if (!pendingIrqs) { -+ return; -+ } -+ -+ while (1) { -+ irqBit <<= 1; -+ isrNumber++; -+ if (isrNumber == 32) { -+ isrNumber = 0; -+ irqBit = 0x1; -+ } -+ if (pendingIrqs & irqBit) { -+ PERF->IrqMask &= ~irqBit; // mask -+ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET); -+ break; -+ } -+ } -+} -+ -+static void irq_dispatch_ext(uint32 irq) -+{ -+ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { -+ printk("**** Ext IRQ mask. Should not dispatch ****\n"); -+ } -+ /* disable and clear interrupt in the controller */ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ do_IRQ(irq); -+} -+ -+ -+extern void brcm_timer_interrupt(struct pt_regs *regs); -+ -+asmlinkage void plat_irq_dispatch(struct pt_regs *regs) -+{ -+ u32 cause; -+ while((cause = (read_c0_cause()& CAUSEF_IP))) { -+ if (cause & CAUSEF_IP7) -+ brcm_timer_interrupt(regs); -+ else if (cause & CAUSEF_IP2) -+ irq_dispatch_int(regs); -+ else if (cause & CAUSEF_IP3) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0); -+ else if (cause & CAUSEF_IP4) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1); -+ else if (cause & CAUSEF_IP5) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2); -+ else if (cause & CAUSEF_IP6) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3); -+ local_irq_disable(); -+ } -+} -+ -+ -+void enable_brcm_irq(unsigned int irq) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { -+ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); -+ } -+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { -+ /* enable and clear interrupt in the controller */ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ } -+ local_irq_restore(flags); -+} -+ -+void disable_brcm_irq(unsigned int irq) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { -+ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); -+ } -+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { -+ /* disable interrupt in the controller */ -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ } -+ local_irq_restore(flags); -+} -+ -+void ack_brcm_irq(unsigned int irq) -+{ -+ /* Already done in brcm_irq_dispatch */ -+} -+ -+unsigned int startup_brcm_irq(unsigned int irq) -+{ -+ enable_brcm_irq(irq); -+ -+ return 0; /* never anything pending */ -+} -+ -+unsigned int startup_brcm_none(unsigned int irq) -+{ -+ return 0; -+} -+ -+void end_brcm_irq(unsigned int irq) -+{ -+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) -+ enable_brcm_irq(irq); -+} -+ -+void end_brcm_none(unsigned int irq) -+{ -+} -+ -+static struct hw_interrupt_type brcm_irq_type = { -+ .typename = "MIPS", -+ .startup = startup_brcm_irq, -+ .shutdown = disable_brcm_irq, -+ .enable = enable_brcm_irq, -+ .disable = disable_brcm_irq, -+ .ack = ack_brcm_irq, -+ .end = end_brcm_irq, -+ .set_affinity = NULL -+}; -+ -+static struct hw_interrupt_type brcm_irq_no_end_type = { -+ .typename = "MIPS", -+ .startup = startup_brcm_none, -+ .shutdown = disable_brcm_irq, -+ .enable = enable_brcm_irq, -+ .disable = disable_brcm_irq, -+ .ack = ack_brcm_irq, -+ .end = end_brcm_none, -+ .set_affinity = NULL -+}; -+ -+void __init arch_init_irq(void) -+{ -+ int i; -+ -+ clear_c0_status(ST0_BEV); -+ change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)); -+ -+ for (i = 0; i < NR_IRQS; i++) { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = 0; -+ irq_desc[i].depth = 1; -+ irq_desc[i].chip = &brcm_irq_type; -+ } -+} -+ -+int request_external_irq(unsigned int irq, -+ FN_HANDLER handler, -+ unsigned long irqflags, -+ const char * devname, -+ void *dev_id) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level -+ -+ local_irq_restore(flags); -+ -+ return( request_irq(irq, handler, irqflags, devname, dev_id) ); -+} -+ -+/* VxWorks compatibility function(s). */ -+ -+unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, -+ unsigned int interruptId) -+{ -+ int nRet = -1; -+ char *devname; -+ -+ devname = kmalloc(16, GFP_KERNEL); -+ if (devname) -+ sprintf( devname, "brcm_%d", interruptId ); -+ -+ /* Set the IRQ description to not automatically enable the interrupt at -+ * the end of an ISR. The driver that handles the interrupt must -+ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior -+ * is consistent with interrupt handling on VxWorks. -+ */ -+ irq_desc[interruptId].chip = &brcm_irq_no_end_type; -+ -+ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) -+ { -+ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, -+ devname, (void *) param ); -+ } -+ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) -+ { -+ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, -+ devname, (void *) param ); -+ } -+ -+ return( nRet ); -+} -+ -+ -+EXPORT_SYMBOL(enable_brcm_irq); -+EXPORT_SYMBOL(disable_brcm_irq); -+EXPORT_SYMBOL(request_external_irq); -+EXPORT_SYMBOL(BcmHalMapInterrupt); -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/prom.c linux-2.6.19.new/arch/mips/bcm963xx/prom.c ---- linux-2.6.19/arch/mips/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/prom.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,143 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * prom.c: PROM library initialization code. -+ * -+ */ -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/sched.h> -+#include <linux/bootmem.h> -+#include <linux/blkdev.h> -+#include <asm/addrspace.h> -+#include <asm/bootinfo.h> -+#include <asm/cpu.h> -+#include <asm/time.h> -+ -+#include <bcm_map_part.h> -+#include <board.h> -+#include "boardparms.h" -+#include "softdsl/AdslCoreDefs.h" -+ -+ -+//char arcs_cmdline[CL_SIZE] __initdata = {0}; -+/* inv_xde */ -+int boot_loader_type; -+int prom_argc; -+char **prom_argv, **prom_envp; -+ -+extern int do_syslog(int, char *, int); -+extern void serial_init(void); -+extern void __init InitNvramInfo( void ); -+extern void kerSysFlashInit( void ); -+extern unsigned long get_nvram_start_addr(void); -+void __init create_root_nfs_cmdline( char *cmdline ); -+ -+#define MACH_BCM MACH_BCM96348 -+ -+const char *get_system_type(void) -+{ -+ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ -+ return( pNvramData->szBoardId );*/ -+ return "brcm63xx"; -+} -+ -+unsigned long getMemorySize(void) -+{ -+ unsigned long ulSdramType = BOARD_SDRAM_TYPE; -+ -+ unsigned long ulSdramSize; -+ -+ switch( ulSdramType ) -+ { -+ case BP_MEMORY_16MB_1_CHIP: -+ case BP_MEMORY_16MB_2_CHIP: -+ ulSdramSize = 16 * 1024 * 1024; -+ break; -+ case BP_MEMORY_32MB_1_CHIP: -+ case BP_MEMORY_32MB_2_CHIP: -+ ulSdramSize = 32 * 1024 * 1024; -+ break; -+ case BP_MEMORY_64MB_2_CHIP: -+ ulSdramSize = 64 * 1024 * 1024; -+ break; -+ default: -+ ulSdramSize = 8 * 1024 * 1024; -+ break; -+ } -+ if (boot_loader_type == BOOT_CFE) -+ return ulSdramSize; -+ else -+ // assume that there is one contiguous memory map -+ return boot_mem_map.map[0].size; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: prom_init -+ -------------------------------------------------------------------------- */ -+void __init prom_init(void) -+{ -+ extern ulong r4k_interval; -+ -+ serial_init(); -+ -+ prom_argc = fw_arg0; -+ prom_argv = (char **) fw_arg1; -+ prom_envp = (char **) fw_arg2; -+ -+ if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) { -+ strncpy(arcs_cmdline, prom_argv[1], CL_SIZE); -+ } -+ -+ if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) { -+ boot_loader_type = BOOT_CFE; -+ } -+ else { -+ boot_loader_type = BOOT_REDBOOT; -+ } -+ -+ do_syslog(8, NULL, 8); -+ -+ printk( "%s prom init\n", get_system_type() ); -+ -+ PERF->IrqMask = 0; -+ -+ arcs_cmdline[0] = '\0'; -+ -+ if (boot_loader_type == BOOT_CFE) -+ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); -+ else -+ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); -+ -+ mips_machgroup = MACH_GROUP_BRCM; -+ mips_machtype = MACH_BCM; -+ -+ BpSetBoardId("96348GW-10"); -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: prom_free_prom_memory -+Abstract: -+ -------------------------------------------------------------------------- */ -+void __init prom_free_prom_memory(void) -+{ -+ -+} -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/ser_init.c linux-2.6.19.new/arch/mips/bcm963xx/ser_init.c ---- linux-2.6.19/arch/mips/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/ser_init.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,180 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Broadcom bcm63xx serial port initialization, also prepare for printk -+ * by registering with console_init -+ * -+ */ -+ -+#include <linux/autoconf.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/kernel.h> -+#include <linux/types.h> -+#include <linux/console.h> -+#include <linux/sched.h> -+ -+#include <asm/addrspace.h> -+#include <asm/irq.h> -+#include <asm/reboot.h> -+#include <asm/gdb-stub.h> -+#include <asm/mc146818rtc.h> -+ -+#include <bcm_map_part.h> -+#include <board.h> -+ -+#define SER63XX_DEFAULT_BAUD 115200 -+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) -+#define stUart ((volatile Uart * const) UART_BASE) -+ -+// Transmit interrupts -+#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR) -+// Receive interrupts -+#define RXINT (RXFIFONE | RXOVFERR) -+ -+/* -------------------------------------------------------------------------- -+ Name: serial_init -+ Purpose: Initalize the UART -+-------------------------------------------------------------------------- */ -+void __init serial_init(void) -+{ -+ UINT32 tmpVal = SER63XX_DEFAULT_BAUD; -+ ULONG clockFreqHz; -+ -+#if defined(CONFIG_BCM96345) -+ // Make sure clock is ticking -+ PERF->blkEnables |= UART_CLK_EN; -+#endif -+ -+ /* Dissable channel's receiver and transmitter. */ -+ stUart->control &= ~(BRGEN|TXEN|RXEN); -+ -+ /*--------------------------------------------------------------------*/ -+ /* Write the table value to the clock select register. */ -+ /* DPullen - this is the equation to use: */ -+ /* value = clockFreqHz / baud / 32-1; */ -+ /* (snmod) Actually you should also take into account any necessary */ -+ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */ -+ /* and subtract 1. If 1, just divide by 2 */ -+ /*--------------------------------------------------------------------*/ -+ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; -+ tmpVal = (clockFreqHz / tmpVal) / 16; -+ if( tmpVal & 0x01 ) -+ tmpVal /= 2; //Rounding up, so sub is already accounted for -+ else -+ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1 -+ stUart->baudword = tmpVal; -+ -+ /* Finally, re-enable the transmitter and receiver. */ -+ stUart->control |= (BRGEN|TXEN|RXEN); -+ -+ stUart->config = (BITS8SYM | ONESTOP); -+ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA; -+ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; -+ stUart->intMask = 0; -+ stUart->intMask = RXINT | TXINT; -+} -+ -+ -+/* prom_putc() -+ * Output a character to the UART -+ */ -+void prom_putc(char c) -+{ -+ /* Wait for Tx uffer to empty */ -+ while (! (READ16(stUart->intStatus) & TXFIFOEMT)); -+ /* Send character */ -+ stUart->Data = c; -+} -+ -+/* prom_puts() -+ * Write a string to the UART -+ */ -+void prom_puts(const char *s) -+{ -+ while (*s) { -+ if (*s == '\n') { -+ prom_putc('\r'); -+ } -+ prom_putc(*s++); -+ } -+} -+ -+ -+/* prom_getc_nowait() -+ * Returns a character from the UART -+ * Returns -1 if no characters available or corrupted -+ */ -+int prom_getc_nowait(void) -+{ -+ uint16 uStatus; -+ int cData = -1; -+ -+ uStatus = READ16(stUart->intStatus); -+ -+ if (uStatus & RXFIFONE) { /* Do we have a character? */ -+ cData = READ16(stUart->Data) & 0xff; /* Read character */ -+ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */ -+ cData = -1; -+ } -+ } -+ -+ return cData; -+} -+ -+/* prom_getc() -+ * Returns a charcter from the serial port -+ * Will block until it receives a valid character -+*/ -+char prom_getc(void) -+{ -+ int cData = -1; -+ -+ /* Loop until we get a valid character */ -+ while(cData == -1) { -+ cData = prom_getc_nowait(); -+ } -+ return (char) cData; -+} -+ -+/* prom_testc() -+ * Returns 0 if no characters available -+ */ -+int prom_testc(void) -+{ -+ uint16 uStatus; -+ -+ uStatus = READ16(stUart->intStatus); -+ -+ return (uStatus & RXFIFONE); -+} -+ -+#if defined (CONFIG_REMOTE_DEBUG) -+/* Prevent other code from writing to the serial port */ -+void _putc(char c) { } -+void _puts(const char *ptr) { } -+#else -+/* Low level outputs call prom routines */ -+void _putc(char c) { -+ prom_putc(c); -+} -+void _puts(const char *ptr) { -+ prom_puts(ptr); -+} -+#endif -diff -urN linux-2.6.19/arch/mips/bcm963xx/setup.c linux-2.6.19.new/arch/mips/bcm963xx/setup.c ---- linux-2.6.19/arch/mips/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/setup.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,523 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Generic setup routines for Broadcom 963xx MIPS boards -+ */ -+ -+#include <linux/autoconf.h> -+#include <linux/init.h> -+#include <linux/interrupt.h> -+#include <linux/kernel.h> -+#include <linux/kdev_t.h> -+#include <linux/types.h> -+#include <linux/console.h> -+#include <linux/sched.h> -+#include <linux/mm.h> -+#include <linux/slab.h> -+#include <linux/module.h> -+#include <linux/pm.h> -+ -+#include <asm/addrspace.h> -+#include <asm/bcache.h> -+#include <asm/irq.h> -+#include <asm/time.h> -+#include <asm/reboot.h> -+#include <asm/gdb-stub.h> -+ -+extern void brcm_time_init(void); -+extern unsigned long getMemorySize(void); -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+#include <linux/pci.h> -+#include <linux/delay.h> -+#include <bcm_map_part.h> -+#include <bcmpci.h> -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+#endif -+ -+/* This function should be in a board specific directory. For now, -+ * assume that all boards that include this file use a Broadcom chip -+ * with a soft reset bit in the PLL control register. -+ */ -+static void brcm_machine_restart(char *command) -+{ -+ const unsigned long ulSoftReset = 0x00000001; -+ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; -+ *pulPllCtrl |= ulSoftReset; -+} -+ -+static void brcm_machine_halt(void) -+{ -+ printk("System halted\n"); -+ while (1); -+} -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+ -+static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value) -+{ -+ /* write index then value */ -+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; -+ mpi->pcicfgdata = value; -+} -+ -+static uint32 mpi_GetLocalPciConfigReg(uint32 reg) -+{ -+ /* write index then get value */ -+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; -+ return mpi->pcicfgdata; -+} -+ -+/* -+ * mpi_ResetPcCard: Set/Reset the PcCard -+ */ -+static void mpi_ResetPcCard(int cardtype, BOOL bReset) -+{ -+ if (cardtype == MPI_CARDTYPE_NONE) { -+ return; -+ } -+ -+ if (cardtype == MPI_CARDTYPE_CARDBUS) { -+ bReset = ! bReset; -+ } -+ -+ if (bReset) { -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); -+ } else { -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET); -+ } -+} -+ -+/* -+ * mpi_ConfigCs: Configure an MPI/EBI chip select -+ */ -+static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags) -+{ -+ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size); -+ mpi->cs[cs].config = flags; -+} -+ -+/* -+ * mpi_InitPcmciaSpace -+ */ -+static void mpi_InitPcmciaSpace(void) -+{ -+ // ChipSelect 4 controls PCMCIA Memory accesses -+ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); -+ // ChipSelect 5 controls PCMCIA Attribute accesses -+ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); -+ // ChipSelect 6 controls PCMCIA I/O accesses -+ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE)); -+ -+ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | -+ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | -+ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | -+ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT)); -+ -+ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS); -+} -+ -+/* -+ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection -+ * -+ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc -+ * CCD1# CCD2# CVS1 CVS2 Type -+ * -+ * GND GND open open 16-bit 5 vdc -+ * -+ * GND GND GND open 16-bit 3.3 vdc -+ * -+ * GND GND open GND 16-bit x.x vdc -+ * -+ * GND GND GND GND 16-bit 3.3 & x.x vdc -+ * -+ *==================================================================== -+ * -+ * CVS1 GND CCD1# open CardBus 3.3 vdc -+ * -+ * GND CVS2 open CCD2# CardBus x.x vdc -+ * -+ * GND CVS1 CCD2# open CardBus y.y vdc -+ * -+ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc -+ * -+ * CVS2 GND open CCD1# CardBus x.x & y.y vdc -+ * -+ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc -+ * -+ */ -+static int cardtype_vcc_detect(void) -+{ -+ uint32 data32; -+ int cardtype; -+ -+ cardtype = MPI_CARDTYPE_NONE; -+ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive -+ // the CVS pins to 0. -+ data32 = mpi->pcmcia_cntl1; -+ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in. -+ { -+ case 0x00000003: // No Card is in the slot. -+ printk("mpi: No Card is in the PCMCIA slot\n"); -+ break; -+ -+ case 0x00000002: // Partial insertion, No CD2#. -+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n"); -+ break; -+ -+ case 0x00000001: // Partial insertion, No CD1#. -+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n"); -+ break; -+ -+ case 0x00000000: -+ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and -+ // float the CVS pins. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ // Read the Register. -+ switch (data32 & 0x0000000C) // See what is on the CVS pins. -+ { -+ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option. -+ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n"); -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ break; -+ -+ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground. -+ // 2 valid voltage options. -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid. -+ printk("mpi: Unknown card plugged into slot\n"); -+ } else { // CCD2 is tied to CVS1. -+ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n"); -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ } -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n"); -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ break; -+ } -+ break; -+ -+ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground. -+ // 2 valid voltage options. -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid. -+ printk("mpi: Unknown card plugged into slot\n"); -+ } else {// CCD2 is tied to CVS2. -+ printk("mpi: Detected 3.3 and x.x Cardbus card\n"); -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ } -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n"); -+ break; -+ } -+ break; -+ -+ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2. -+ // 5 valid voltage options. -+ -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ // CCD1 is tied to ground. -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1. -+ printk("mpi: Detected y.y vdc Cardbus card\n"); -+ } else { // CCD2 is tied to CVS2. -+ printk("mpi: Detected x.x vdc Cardbus card\n"); -+ } -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // CCD2 is tied to ground. -+ -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000001) {// CCD1 is tied to CVS1. -+ printk("mpi: Detected 3.3 vdc Cardbus card\n"); -+ } else { // CCD1 is tied to CVS2. -+ printk("mpi: Detected x.x and y.y Cardbus card\n"); -+ } -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n"); -+ break; -+ } -+ break; -+ -+ default: -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ } -+ } -+ return cardtype; -+} -+ -+/* -+ * mpi_DetectPcCard: Detect the plugged in PC-Card -+ * Return: < 0 => Unknown card detected -+ * 0 => No card detected -+ * 1 => 16-bit card detected -+ * 2 => 32-bit CardBus card detected -+ */ -+static int mpi_DetectPcCard(void) -+{ -+ int cardtype; -+ -+ cardtype = cardtype_vcc_detect(); -+ switch(cardtype) { -+ case MPI_CARDTYPE_PCMCIA: -+ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits -+ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); -+ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE); -+ mpi_InitPcmciaSpace(); -+ mpi_ResetPcCard(cardtype, FALSE); -+ // Hold card in reset for 10ms -+ mdelay(10); -+ mpi_ResetPcCard(cardtype, TRUE); -+ // Let card come out of reset -+ mdelay(100); -+ break; -+ case MPI_CARDTYPE_CARDBUS: -+ // 8 => CardBus Enable -+ // 1 => PCI Slot Number -+ // C => Float VS1 & VS2 -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | -+ CARDBUS_ENABLE | -+ (CARDBUS_SLOT << 8)| -+ VS2_OEN | -+ VS1_OEN; -+ /* access to this memory window will be to/from CardBus */ -+ mpi->l2pmremap1 |= CARDBUS_MEM; -+ -+ // Need to reset the Cardbus Card. There's no CardManager to do this, -+ // and we need to be ready for PCI configuration. -+ mpi_ResetPcCard(cardtype, FALSE); -+ // Hold card in reset for 10ms -+ mdelay(10); -+ mpi_ResetPcCard(cardtype, TRUE); -+ // Let card come out of reset -+ mdelay(100); -+ break; -+ default: -+ break; -+ } -+ return cardtype; -+} -+ -+static int mpi_init(void) -+{ -+ unsigned long data; -+ unsigned int chipid; -+ unsigned int chiprev; -+ unsigned int sdramsize; -+ -+ chipid = (PERF->RevID & 0xFFFF0000) >> 16; -+ chiprev = (PERF->RevID & 0xFF); -+ sdramsize = getMemorySize(); -+ /* -+ * Init the pci interface -+ */ -+ data = GPIO->GPIOMode; // GPIO mode register -+ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus -+ GPIO->GPIOMode = data; // PCI internal arbiter -+ -+ /* -+ * In the BCM6348 CardBus support is defaulted to Slot 0 -+ * because there is no external IDSEL for CardBus. To disable -+ * the CardBus and allow a standard PCI card in Slot 0 -+ * set the cbus_idsel field to 0x1f. -+ */ -+ /* -+ uData = mpi->pcmcia_cntl1; -+ uData |= CARDBUS_IDSEL; -+ mpi->pcmcia_cntl1 = uData; -+ */ -+ // Setup PCI I/O Window range. Give 64K to PCI I/O -+ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1); -+ // UBUS to PCI I/O base address -+ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI I/O Window remap -+ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN); -+ -+ // enable PCI related GPIO pins and data swap between system and PCI bus -+ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP); -+ -+ /* Enable 6348 BusMaster and Memory access mode */ -+ data = mpi_GetLocalPciConfigReg(PCI_COMMAND); -+ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -+ mpi_SetLocalPciConfigReg(PCI_COMMAND, data); -+ -+ /* Configure two 16 MByte PCI to System memory regions. */ -+ /* These memory regions are used when PCI device is a bus master */ -+ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */ -+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1); -+ mpi->sp0remap = 0x0; -+ -+ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */ -+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2); -+ mpi->sp1remap = 0x0; -+ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40); -+ -+ if ((chipid == 0x6348) && (chiprev == 0xb0)) { -+ mpi->sp0range = ~(sdramsize-1); -+ mpi->sp1range = ~(sdramsize-1); -+ } -+ /* -+ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity -+ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in -+ * first read. -+ */ -+ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER); -+ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK; -+ data |= 0x00000080; -+ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data); -+ -+ /* enable pci interrupt */ -+ mpi->locintstat |= (EXT_PCI_INT << 16); -+ -+ mpi_DetectPcCard(); -+ -+ ioport_resource.start = BCM_PCI_IO_BASE; -+ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB; -+ -+#if defined(CONFIG_USB) -+ PERF->blkEnables |= USBH_CLK_EN; -+ mdelay(100); -+ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP; -+#endif -+ -+ return 0; -+} -+#endif -+ -+static int __init brcm63xx_setup(void) -+{ -+ extern int panic_timeout; -+ -+ _machine_restart = brcm_machine_restart; -+ _machine_halt = brcm_machine_halt; -+ pm_power_off = brcm_machine_halt; -+ -+ board_time_init = brcm_time_init; -+ -+ panic_timeout = 5; -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+ /* mpi initialization */ -+ mpi_init(); -+#endif -+ return 0; -+} -+ -+void __init plat_mem_setup(void) -+{ -+ brcm63xx_setup(); -+} -+ -+/*************************************************************************** -+ * C++ New and delete operator functions -+ ***************************************************************************/ -+ -+/* void *operator new(unsigned int sz) */ -+void *_Znwj(unsigned int sz) -+{ -+ return( kmalloc(sz, GFP_KERNEL) ); -+} -+ -+/* void *operator new[](unsigned int sz)*/ -+void *_Znaj(unsigned int sz) -+{ -+ return( kmalloc(sz, GFP_KERNEL) ); -+} -+ -+/* placement new operator */ -+/* void *operator new (unsigned int size, void *ptr) */ -+void *ZnwjPv(unsigned int size, void *ptr) -+{ -+ return ptr; -+} -+ -+/* void operator delete(void *m) */ -+void _ZdlPv(void *m) -+{ -+ kfree(m); -+} -+ -+/* void operator delete[](void *m) */ -+void _ZdaPv(void *m) -+{ -+ kfree(m); -+} -+ -+EXPORT_SYMBOL(_Znwj); -+EXPORT_SYMBOL(_Znaj); -+EXPORT_SYMBOL(ZnwjPv); -+EXPORT_SYMBOL(_ZdlPv); -+EXPORT_SYMBOL(_ZdaPv); -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h linux-2.6.19.new/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h ---- linux-2.6.19/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,2 @@ -+#define ADSL_SDRAM_IMAGE_SIZE (384*1024) -+ -diff -urN linux-2.6.19/arch/mips/bcm963xx/time.c linux-2.6.19.new/arch/mips/bcm963xx/time.c ---- linux-2.6.19/arch/mips/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/bcm963xx/time.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,114 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Setup time for Broadcom 963xx MIPS boards -+ */ -+ -+#include <linux/autoconf.h> -+#include <linux/init.h> -+#include <linux/kernel_stat.h> -+#include <linux/sched.h> -+#include <linux/spinlock.h> -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/time.h> -+#include <linux/timex.h> -+ -+#include <asm/mipsregs.h> -+#include <asm/ptrace.h> -+#include <asm/div64.h> -+#include <asm/time.h> -+ -+#include <bcm_map_part.h> -+#include <bcm_intr.h> -+ -+static unsigned long r4k_offset; /* Amount to increment compare reg each time */ -+static unsigned long r4k_cur; /* What counter should be at next timer irq */ -+ -+/* ********************************************************************* -+ * calculateCpuSpeed() -+ * Calculate the BCM6348 CPU speed by reading the PLL strap register -+ * and applying the following formula: -+ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) -+ * Input parameters: -+ * none -+ * Return value: -+ * none -+ ********************************************************************* */ -+ -+static inline unsigned long __init calculateCpuSpeed(void) -+{ -+ UINT32 pllStrap = PERF->PllStrap; -+ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; -+ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; -+ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; -+ -+ return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; -+} -+ -+ -+static inline unsigned long __init cal_r4koff(void) -+{ -+ mips_hpt_frequency = calculateCpuSpeed() / 2; -+ return (mips_hpt_frequency / HZ); -+} -+ -+ -+/* -+ * There are a lot of conceptually broken versions of the MIPS timer interrupt -+ * handler floating around. This one is rather different, but the algorithm -+ * is provably more robust. -+ */ -+irqreturn_t brcm_timer_interrupt(struct pt_regs *regs) -+{ -+ int irq = MIPS_TIMER_INT; -+ -+ irq_enter(); -+ kstat_this_cpu.irqs[irq]++; -+ -+ timer_interrupt(irq, regs); -+ irq_exit(); -+ return IRQ_HANDLED; -+} -+ -+ -+void __init brcm_time_init(void) -+{ -+ unsigned int est_freq, flags; -+ local_irq_save(flags); -+ -+ printk("calculating r4koff... "); -+ r4k_offset = cal_r4koff(); -+ printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset); -+ -+ est_freq = 2 * r4k_offset * HZ; -+ est_freq += 5000; /* round */ -+ est_freq -= est_freq % 10000; -+ printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000, -+ (est_freq % 1000000) * 100 / 1000000); -+ local_irq_restore(flags); -+} -+ -+ -+void __init plat_timer_setup(struct irqaction *irq) -+{ -+ r4k_cur = (read_c0_count() + r4k_offset); -+ write_c0_compare(r4k_cur); -+ set_c0_status(IE_IRQ5); -+} diff -urN linux-2.6.19/arch/mips/kernel/cpu-probe.c linux-2.6.19.new/arch/mips/kernel/cpu-probe.c --- linux-2.6.19/arch/mips/kernel/cpu-probe.c 2006-11-29 22:57:37.000000000 +0100 +++ linux-2.6.19.new/arch/mips/kernel/cpu-probe.c 2006-12-16 18:46:31.000000000 +0100 @@ -8038,441 +137,6 @@ diff -urN linux-2.6.19/arch/mips/pci/Makefile linux-2.6.19.new/arch/mips/pci/Mak # # These are still pretty much in the old state, watch, go blind. -diff -urN linux-2.6.19/arch/mips/pci/fixup-bcm96348.c linux-2.6.19.new/arch/mips/pci/fixup-bcm96348.c ---- linux-2.6.19/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/pci/fixup-bcm96348.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,93 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include <linux/init.h> -+#include <linux/types.h> -+#include <linux/pci.h> -+ -+#include <bcmpci.h> -+#include <bcm_intr.h> -+#include <bcm_map_part.h> -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+ -+static char irq_tab_bcm96348[] __initdata = { -+ [0] = INTERRUPT_ID_MPI, -+ [1] = INTERRUPT_ID_MPI, -+#if defined(CONFIG_USB) -+ [USB_HOST_SLOT] = INTERRUPT_ID_USBH -+#endif -+}; -+ -+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ return irq_tab_bcm96348[slot]; -+} -+ -+static void bcm96348_fixup(struct pci_dev *dev) -+{ -+ uint32 memaddr; -+ uint32 size; -+ -+ memaddr = pci_resource_start(dev, 0); -+ size = pci_resource_len(dev, 0); -+ -+ switch (PCI_SLOT(dev->devfn)) { -+ case 0: -+ // UBUS to PCI address range -+ // Memory Window 1. Mask determines which bits are decoded. -+ mpi->l2pmrange1 = ~(size-1); -+ // UBUS to PCI Memory base address. This is akin to the ChipSelect base -+ // register. -+ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI Remap Address. Replaces the masked address bits in the -+ // range register with this setting. -+ // Also, enable direct I/O and direct Memory accesses -+ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN); -+ break; -+ -+ case 1: -+ // Memory Window 2 -+ mpi->l2pmrange2 = ~(size-1); -+ // UBUS to PCI Memory base address. -+ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI Remap Address -+ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN); -+ break; -+ -+#if defined(CONFIG_USB) -+ case USB_HOST_SLOT: -+ dev->resource[0].start = USB_HOST_BASE; -+ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1; -+ break; -+#endif -+ } -+} -+ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ return 0; -+} -+ -+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_ANY_ID, -+ bcm96348_fixup); -+ -+/*struct pci_fixup pcibios_fixups[] = { -+ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup }, -+ {0} -+};*/ -diff -urN linux-2.6.19/arch/mips/pci/ops-bcm96348.c linux-2.6.19.new/arch/mips/pci/ops-bcm96348.c ---- linux-2.6.19/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/pci/ops-bcm96348.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,276 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include <linux/types.h> -+#include <linux/pci.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <asm/addrspace.h> -+ -+#include <bcm_intr.h> -+#include <bcm_map_part.h> -+#include <bcmpci.h> -+ -+#include <linux/delay.h> -+ -+#if defined(CONFIG_USB) -+#if 0 -+#define DPRINT(x...) printk(x) -+#else -+#define DPRINT(x...) -+#endif -+ -+static int -+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size); -+static int -+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size); -+ -+static bool usb_mem_size_rd = FALSE; -+static uint32 usb_mem_base = 0; -+static uint32 usb_cfg_space_cmd_reg = 0; -+#endif -+static bool pci_mem_size_rd = FALSE; -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+ -+static void mpi_SetupPciConfigAccess(uint32 addr) -+{ -+ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE; -+} -+ -+static void mpi_ClearPciConfigAccess(void) -+{ -+ mpi->l2pcfgctl = 0x00000000; -+} -+ -+#if defined(CONFIG_USB) -+/* -------------------------------------------------------------------------- -+ Name: pci63xx_int_write -+Abstract: PCI Config write on internal device(s) -+ -------------------------------------------------------------------------- */ -+static int -+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size) -+{ -+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { -+ return PCIBIOS_SUCCESSFUL; -+ } -+ -+ switch (size) { -+ case 1: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 2: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ switch (where) { -+ case PCI_COMMAND: -+ usb_cfg_space_cmd_reg = *value; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 4: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", -+ PCI_SLOT(devfn), where, size, *value); -+ switch (where) { -+ case PCI_BASE_ADDRESS_0: -+ if (*value == 0xffffffff) { -+ usb_mem_size_rd = TRUE; -+ } else { -+ usb_mem_base = *value; -+ } -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: pci63xx_int_read -+Abstract: PCI Config read on internal device(s) -+ -------------------------------------------------------------------------- */ -+static int -+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size) -+{ -+ uint32 retValue = 0xFFFFFFFF; -+ -+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { -+ return PCIBIOS_SUCCESSFUL; -+ } -+ -+ // For now, this is specific to the USB Host controller. We can -+ // make it more general if we have to... -+ // Emulate PCI Config accesses -+ switch (where) { -+ case PCI_VENDOR_ID: -+ case PCI_DEVICE_ID: -+ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000; -+ break; -+ case PCI_COMMAND: -+ case PCI_STATUS: -+ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg; -+ break; -+ case PCI_CLASS_REVISION: -+ case PCI_CLASS_DEVICE: -+ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01; -+ break; -+ case PCI_BASE_ADDRESS_0: -+ if (usb_mem_size_rd) { -+ retValue = USB_BAR0_MEM_SIZE; -+ } else { -+ if (usb_mem_base != 0) -+ retValue = usb_mem_base; -+ else -+ retValue = USB_HOST_BASE; -+ } -+ usb_mem_size_rd = FALSE; -+ break; -+ case PCI_CACHE_LINE_SIZE: -+ case PCI_LATENCY_TIMER: -+ retValue = 0; -+ break; -+ case PCI_HEADER_TYPE: -+ retValue = PCI_HEADER_TYPE_NORMAL; -+ break; -+ case PCI_SUBSYSTEM_VENDOR_ID: -+ retValue = PCI_VENDOR_ID_BROADCOM; -+ break; -+ case PCI_SUBSYSTEM_ID: -+ retValue = 0x6300; -+ break; -+ case PCI_INTERRUPT_LINE: -+ retValue = INTERRUPT_ID_USBH; -+ break; -+ default: -+ break; -+ } -+ -+ switch (size) { -+ case 1: -+ *value = (retValue >> ((where & 3) << 3)) & 0xff; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 2: -+ *value = (retValue >> ((where & 3) << 3)) & 0xffff; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 4: -+ *value = retValue; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ default: -+ break; -+ } -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+#endif -+ -+static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 * val) -+{ -+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); -+ uint32 data; -+ -+#if defined(CONFIG_USB) -+ if (PCI_SLOT(devfn) == USB_HOST_SLOT) -+ return pci63xx_int_read(devfn, where, val, size); -+#endif -+ -+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); -+ data = *(uint32 *)ioBase; -+ switch(size) { -+ case 1: -+ *val = (data >> ((where & 3) << 3)) & 0xff; -+ break; -+ case 2: -+ *val = (data >> ((where & 3) << 3)) & 0xffff; -+ break; -+ case 4: -+ *val = data; -+ /* Special case for reading PCI device range */ -+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { -+ if (pci_mem_size_rd) { -+ /* bcm6348 PCI memory window minimum size is 64K */ -+ *val &= PCI_SIZE_64K; -+ } -+ } -+ break; -+ default: -+ break; -+ } -+ pci_mem_size_rd = FALSE; -+ mpi_ClearPciConfigAccess(); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 val) -+{ -+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); -+ uint32 data; -+ -+#if defined(CONFIG_USB) -+ if (PCI_SLOT(devfn) == USB_HOST_SLOT) -+ return pci63xx_int_write(devfn, where, &val, size); -+#endif -+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); -+ data = *(uint32 *)ioBase; -+ switch(size) { -+ case 1: -+ data = (data & ~(0xff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ break; -+ case 2: -+ data = (data & ~(0xffff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ break; -+ case 4: -+ data = val; -+ /* Special case for reading PCI device range */ -+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { -+ if (val == 0xffffffff) -+ pci_mem_size_rd = TRUE; -+ } -+ break; -+ default: -+ break; -+ } -+ *(uint32 *)ioBase = data; -+ udelay(500); -+ mpi_ClearPciConfigAccess(); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+struct pci_ops bcm96348_pci_ops = { -+ .read = bcm96348_pcibios_read, -+ .write = bcm96348_pcibios_write -+}; -diff -urN linux-2.6.19/arch/mips/pci/pci-bcm96348.c linux-2.6.19.new/arch/mips/pci/pci-bcm96348.c ---- linux-2.6.19/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/arch/mips/pci/pci-bcm96348.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,54 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include <linux/types.h> -+#include <linux/pci.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+ -+//#include <asm/pci_channel.h> -+#include <bcmpci.h> -+ -+static struct resource bcm_pci_io_resource = { -+ .name = "bcm96348 pci IO space", -+ .start = BCM_PCI_IO_BASE, -+ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1, -+ .flags = IORESOURCE_IO -+}; -+ -+static struct resource bcm_pci_mem_resource = { -+ .name = "bcm96348 pci memory space", -+ .start = BCM_PCI_MEM_BASE, -+ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1, -+ .flags = IORESOURCE_MEM -+}; -+ -+extern struct pci_ops bcm96348_pci_ops; -+ -+struct pci_controller bcm96348_controller = { -+ .pci_ops = &bcm96348_pci_ops, -+ .io_resource = &bcm_pci_io_resource, -+ .mem_resource = &bcm_pci_mem_resource, -+}; -+ -+static void bcm96348_pci_init(void) -+{ -+ register_pci_controller(&bcm96348_controller); -+} -+ -+arch_initcall(bcm96348_pci_init); diff -urN linux-2.6.19/drivers/serial/Makefile linux-2.6.19.new/drivers/serial/Makefile --- linux-2.6.19/drivers/serial/Makefile 2006-11-29 22:57:37.000000000 +0100 +++ linux-2.6.19.new/drivers/serial/Makefile 2006-12-16 18:49:17.000000000 +0100 @@ -8481,1059 +145,6 @@ diff -urN linux-2.6.19/drivers/serial/Makefile linux-2.6.19.new/drivers/serial/M obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o +obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o -diff -urN linux-2.6.19/drivers/serial/bcm63xx_cons.c linux-2.6.19.new/drivers/serial/bcm63xx_cons.c ---- linux-2.6.19/drivers/serial/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/drivers/serial/bcm63xx_cons.c 2006-12-16 18:46:31.000000000 +0100 -@@ -0,0 +1,1049 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+/* Description: Serial port driver for the BCM963XX. */ -+ -+#define CARDNAME "bcm963xx_serial driver" -+#define VERSION "2.0" -+#define VER_STR CARDNAME " v" VERSION "\n" -+ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/version.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/interrupt.h> -+#include <linux/spinlock.h> -+ -+/* for definition of struct console */ -+#include <linux/console.h> -+#include <linux/tty.h> -+#include <linux/tty_flip.h> -+#include <linux/serial.h> -+#include <linux/serialP.h> -+#include <asm/uaccess.h> -+ -+#include <bcmtypes.h> -+#include <board.h> -+#include <bcm_map_part.h> -+#include <bcm_intr.h> -+ -+static DEFINE_SPINLOCK(bcm963xx_serial_lock); -+ -+extern void _putc(char); -+extern void _puts(const char *); -+ -+typedef struct bcm_serial { -+ volatile Uart * port; -+ int type; -+ int flags; -+ int irq; -+ int baud_base; -+ int blocked_open; -+ unsigned short close_delay; -+ unsigned short closing_wait; -+ unsigned short line; /* port/line number */ -+ unsigned short cflags; /* line configuration flag */ -+ unsigned short x_char; /* xon/xoff character */ -+ unsigned short read_status_mask; /* mask for read condition */ -+ unsigned short ignore_status_mask; /* mask for ignore condition */ -+ unsigned long event; /* mask used in BH */ -+ int xmit_head; /* Position of the head */ -+ int xmit_tail; /* Position of the tail */ -+ int xmit_cnt; /* Count of the chars in the buffer */ -+ int count; /* indicates how many times it has been opened */ -+ int magic; -+ -+ struct async_icount icount; /* keep track of things ... */ -+ struct tty_struct *tty; /* tty associated */ -+ struct termios normal_termios; -+ -+ wait_queue_head_t open_wait; -+ wait_queue_head_t close_wait; -+ -+ long session; /* Session of opening process */ -+ long pgrp; /* pgrp of opening process */ -+ -+ unsigned char is_initialized; -+} Context; -+ -+ -+/*---------------------------------------------------------------------*/ -+/* Define bits in the Interrupt Enable register */ -+/*---------------------------------------------------------------------*/ -+/* Enable receive interrupt */ -+#define RXINT (RXFIFONE|RXOVFERR) -+ -+/* Enable transmit interrupt */ -+#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR) -+ -+/* Enable receiver line status interrupt */ -+#define LSINT (RXBRK|RXPARERR|RXFRAMERR) -+ -+#define BCM_NUM_UARTS 1 -+ -+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) -+ -+ -+static struct bcm_serial multi[BCM_NUM_UARTS]; -+static struct bcm_serial *lines[BCM_NUM_UARTS]; -+static struct tty_driver *serial_driver; -+static struct termios *serial_termios[BCM_NUM_UARTS]; -+static struct termios *serial_termios_locked[BCM_NUM_UARTS]; -+ -+ -+static void bcm_stop (struct tty_struct *tty); -+static void bcm_start (struct tty_struct *tty); -+static inline void receive_chars (struct bcm_serial * info); -+static int startup (struct bcm_serial *info); -+static void shutdown (struct bcm_serial * info); -+static void change_speed( volatile Uart *pUart, tcflag_t cFlag ); -+static void bcm63xx_cons_flush_chars (struct tty_struct *tty); -+static int bcm63xx_cons_write (struct tty_struct *tty, -+ const unsigned char *buf, int count); -+static int bcm63xx_cons_write_room (struct tty_struct *tty); -+static int bcm_chars_in_buffer (struct tty_struct *tty); -+static void bcm_flush_buffer (struct tty_struct *tty); -+static void bcm_throttle (struct tty_struct *tty); -+static void bcm_unthrottle (struct tty_struct *tty); -+static void bcm_send_xchar (struct tty_struct *tty, char ch); -+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo); -+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info); -+static int get_lsr_info (struct bcm_serial *info, unsigned int *value); -+static void send_break (struct bcm_serial *info, int duration); -+static int bcm_ioctl (struct tty_struct * tty, struct file * file, -+ unsigned int cmd, unsigned long arg); -+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios); -+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp); -+static void bcm_hangup (struct tty_struct *tty); -+static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info); -+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp); -+static int __init bcm63xx_serialinit(void); -+ -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_stop () and rs_start () -+ * -+ * These routines are called before setting or resetting -+ * tty->stopped. They enable or disable transmitter interrupts, -+ * as necessary. -+ * ------------------------------------------------------------ -+ */ -+static void bcm_stop (struct tty_struct *tty) -+{ -+} -+ -+static void bcm_start (struct tty_struct *tty) -+{ -+ _puts(CARDNAME " Start\n"); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * receive_char () -+ * -+ * This routine deals with inputs from any lines. -+ * ------------------------------------------------------------ -+ */ -+static inline void receive_chars (struct bcm_serial * info) -+{ -+ struct tty_struct *tty = 0; -+ struct async_icount * icount; -+ int ignore = 0; -+ unsigned short status, tmp; -+ UCHAR ch = 0; -+ while ((status = info->port->intStatus) & RXINT) -+ { -+ char flag_char = TTY_NORMAL; -+ -+ if (status & RXFIFONE) -+ ch = info->port->Data; // Read the character -+ tty = info->tty; /* now tty points to the proper dev */ -+ icount = &info->icount; -+ if (! tty) -+ break; -+ if (!tty_buffer_request_room(tty, 1)) -+ break; -+ icount->rx++; -+ if (status & RXBRK) -+ { -+ flag_char = TTY_BREAK; -+ icount->brk++; -+ } -+ // keep track of the statistics -+ if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) -+ { -+ if (status & RXPARERR) /* parity error */ -+ icount->parity++; -+ else -+ if (status & RXFRAMERR) /* frame error */ -+ icount->frame++; -+ if (status & RXOVFERR) -+ { -+ // Overflow. Reset the RX FIFO -+ info->port->fifoctl |= RSTRXFIFOS; -+ icount->overrun++; -+ } -+ // check to see if we should ignore the character -+ // and mask off conditions that should be ignored -+ if (status & info->ignore_status_mask) -+ { -+ if (++ignore > 100 ) -+ break; -+ goto ignore_char; -+ } -+ // Mask off the error conditions we want to ignore -+ tmp = status & info->read_status_mask; -+ if (tmp & RXPARERR) -+ { -+ flag_char = TTY_PARITY; -+ } -+ else -+ if (tmp & RXFRAMERR) -+ { -+ flag_char = TTY_FRAME; -+ } -+ if (tmp & RXOVFERR) -+ { -+ tty_insert_flip_char(tty, ch, flag_char); -+ ch = 0; -+ flag_char = TTY_OVERRUN; -+ if (!tty_buffer_request_room(tty, 1)) -+ break; -+ } -+ } -+ tty_insert_flip_char(tty, ch, flag_char); -+ } -+ignore_char:; -+ tty_flip_buffer_push(tty); -+ tty_schedule_flip(tty); -+ -+} -+ -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm_interrupt () -+ * -+ * this is the main interrupt routine for the chip. -+ * It deals with the multiple ports. -+ * ------------------------------------------------------------ -+ */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+static irqreturn_t bcm_interrupt (int irq, void * dev) -+#else -+static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs) -+#endif -+{ -+ struct bcm_serial * info = lines[0]; -+ UINT16 intStat; -+ -+ /* get pending interrupt flags from UART */ -+ -+ /* Mask with only the serial interrupts that are enabled */ -+ intStat = info->port->intStatus & info->port->intMask; -+ while (intStat) -+ { -+ if (intStat & RXINT) -+ receive_chars (info); -+ else -+ if (intStat & TXINT) -+ info->port->intStatus = TXINT; -+ else /* don't know what it was, so let's mask it */ -+ info->port->intMask &= ~intStat; -+ -+ intStat = info->port->intStatus & info->port->intMask; -+ } -+ -+ // Clear the interrupt -+ BcmHalInterruptEnable (INTERRUPT_ID_UART); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ return IRQ_HANDLED; -+#endif -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * startup () -+ * -+ * various initialization tasks -+ * ------------------------------------------------------------------- -+ */ -+static int startup (struct bcm_serial *info) -+{ -+ // Port is already started... -+ return 0; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * shutdown () -+ * -+ * This routine will shutdown a serial port; interrupts are disabled, and -+ * DTR is dropped if the hangup on close termio flag is on. -+ * ------------------------------------------------------------------- -+ */ -+static void shutdown (struct bcm_serial * info) -+{ -+ unsigned long flags; -+ if (!info->is_initialized) -+ return; -+ -+ spin_lock_irqsave(&bcm963xx_serial_lock, flags); -+ -+ info->port->control &= ~(BRGEN|TXEN|RXEN); -+ if (info->tty) -+ set_bit (TTY_IO_ERROR, &info->tty->flags); -+ info->is_initialized = 0; -+ -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+} -+/* -+ * ------------------------------------------------------------------- -+ * change_speed () -+ * -+ * Set the baud rate, character size, parity and stop bits. -+ * ------------------------------------------------------------------- -+ */ -+static void change_speed( volatile Uart *pUart, tcflag_t cFlag ) -+{ -+ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp; -+ -+ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags); -+ switch( cFlag & (CBAUD | CBAUDEX) ) -+ { -+ case B115200: -+ ulBaud = 115200; -+ break; -+ case B57600: -+ ulBaud = 57600; -+ break; -+ case B38400: -+ ulBaud = 38400; -+ break; -+ case B19200: -+ ulBaud = 19200; -+ break; -+ case B9600: -+ ulBaud = 9600; -+ break; -+ case B4800: -+ ulBaud = 4800; -+ break; -+ case B2400: -+ ulBaud = 2400; -+ break; -+ case B1800: -+ ulBaud = 1800; -+ break; -+ case B1200: -+ ulBaud = 1200; -+ break; -+ case B600: -+ ulBaud = 600; -+ break; -+ case B300: -+ ulBaud = 300; -+ break; -+ case B200: -+ ulBaud = 200; -+ break; -+ case B150: -+ ulBaud = 150; -+ break; -+ case B134: -+ ulBaud = 134; -+ break; -+ case B110: -+ ulBaud = 110; -+ break; -+ case B75: -+ ulBaud = 75; -+ break; -+ case B50: -+ ulBaud = 50; -+ break; -+ default: -+ ulBaud = 115200; -+ break; -+ } -+ -+ /* Calculate buad rate. */ -+ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; -+ ulTmp = (ulClockFreqHz / ulBaud) / 16; -+ if( ulTmp & 0x01 ) -+ ulTmp /= 2; /* Rounding up, so sub is already accounted for */ -+ else -+ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */ -+ pUart->baudword = ulTmp; -+ -+ /* Set character size, stop bits and parity. */ -+ switch( cFlag & CSIZE ) -+ { -+ case CS5: -+ ulTmp = BITS5SYM; /* select transmit 5 bit data size */ -+ break; -+ case CS6: -+ ulTmp = BITS6SYM; /* select transmit 6 bit data size */ -+ break; -+ case CS7: -+ ulTmp = BITS7SYM; /* select transmit 7 bit data size */ -+ break; -+ default: -+ ulTmp = BITS8SYM; /* select transmit 8 bit data size */ -+ break; -+ } -+ if( cFlag & CSTOPB ) -+ ulTmp |= TWOSTOP; /* select 2 stop bits */ -+ else -+ ulTmp |= ONESTOP; /* select one stop bit */ -+ -+ /* Write these values into the config reg. */ -+ pUart->config = ulTmp; -+ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN); -+ switch( cFlag & (PARENB | PARODD) ) -+ { -+ case PARENB|PARODD: -+ pUart->control |= RXPARITYEN | TXPARITYEN; -+ break; -+ case PARENB: -+ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN; -+ break; -+ default: -+ pUart->control |= 0; -+ break; -+ } -+ -+ /* Reset and flush uart */ -+ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags); -+} -+ -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_flush_char () -+ * -+ * Nothing to flush. Polled I/O is used. -+ * ------------------------------------------------------------------- -+ */ -+static void bcm63xx_cons_flush_chars (struct tty_struct *tty) -+{ -+} -+ -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm63xx_cons_write () -+ * -+ * Main output routine using polled I/O. -+ * ------------------------------------------------------------------- -+ */ -+static int bcm63xx_cons_write (struct tty_struct *tty, -+ const unsigned char *buf, int count) -+{ -+ int c; -+ -+ for (c = 0; c < count; c++) -+ _putc(buf[c]); -+ return count; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm63xx_cons_write_room () -+ * -+ * Compute the amount of space available for writing. -+ * ------------------------------------------------------------------- -+ */ -+static int bcm63xx_cons_write_room (struct tty_struct *tty) -+{ -+ /* Pick a number. Any number. Polled I/O is used. */ -+ return 1024; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_chars_in_buffer () -+ * -+ * compute the amount of char left to be transmitted -+ * ------------------------------------------------------------------- -+ */ -+static int bcm_chars_in_buffer (struct tty_struct *tty) -+{ -+ return 0; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_flush_buffer () -+ * -+ * Empty the output buffer -+ * ------------------------------------------------------------------- -+ */ -+static void bcm_flush_buffer (struct tty_struct *tty) -+{ -+ tty_wakeup(tty); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm_throttle () and bcm_unthrottle () -+ * -+ * This routine is called by the upper-layer tty layer to signal that -+ * incoming characters should be throttled (or not). -+ * ------------------------------------------------------------ -+ */ -+static void bcm_throttle (struct tty_struct *tty) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ if (I_IXOFF(tty)) -+ info->x_char = STOP_CHAR(tty); -+} -+ -+static void bcm_unthrottle (struct tty_struct *tty) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ if (I_IXOFF(tty)) -+ { -+ if (info->x_char) -+ info->x_char = 0; -+ else -+ info->x_char = START_CHAR(tty); -+ } -+} -+ -+static void bcm_send_xchar (struct tty_struct *tty, char ch) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ info->x_char = ch; -+ if (ch) -+ bcm_start (info->tty); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_ioctl () and friends -+ * ------------------------------------------------------------ -+ */ -+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo) -+{ -+ struct serial_struct tmp; -+ -+ if (!retinfo) -+ return -EFAULT; -+ -+ memset (&tmp, 0, sizeof(tmp)); -+ tmp.type = info->type; -+ tmp.line = info->line; -+ tmp.port = (int) info->port; -+ tmp.irq = info->irq; -+ tmp.flags = 0; -+ tmp.baud_base = info->baud_base; -+ tmp.close_delay = info->close_delay; -+ tmp.closing_wait = info->closing_wait; -+ -+ return copy_to_user (retinfo, &tmp, sizeof(*retinfo)); -+} -+ -+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info) -+{ -+ struct serial_struct new_serial; -+ struct bcm_serial old_info; -+ int retval = 0; -+ -+ if (!new_info) -+ return -EFAULT; -+ -+ copy_from_user (&new_serial, new_info, sizeof(new_serial)); -+ old_info = *info; -+ -+ if (!capable(CAP_SYS_ADMIN)) -+ return -EPERM; -+ -+ -+ if (info->count > 1) -+ return -EBUSY; -+ -+ /* OK, past this point, all the error checking has been done. -+ * At this point, we start making changes..... -+ */ -+ info->baud_base = new_serial.baud_base; -+ info->type = new_serial.type; -+ info->close_delay = new_serial.close_delay; -+ info->closing_wait = new_serial.closing_wait; -+ retval = startup (info); -+ return retval; -+} -+ -+/* -+ * get_lsr_info - get line status register info -+ * -+ * Purpose: Let user call ioctl() to get info when the UART physically -+ * is emptied. On bus types like RS485, the transmitter must -+ * release the bus after transmitting. This must be done when -+ * the transmit shift register is empty, not be done when the -+ * transmit holding register is empty. This functionality -+ * allows an RS485 driver to be written in user space. -+ */ -+static int get_lsr_info (struct bcm_serial *info, unsigned int *value) -+{ -+ return( 0 ); -+} -+ -+/* -+ * This routine sends a break character out the serial port. -+ */ -+static void send_break (struct bcm_serial *info, int duration) -+{ -+ unsigned long flags; -+ -+ if (!info->port) -+ return; -+ -+ current->state = TASK_INTERRUPTIBLE; -+ -+ /*save_flags (flags); -+ cli();*/ -+ spin_lock_irqsave(&bcm963xx_serial_lock, flags); -+ -+ info->port->control |= XMITBREAK; -+ schedule_timeout(duration); -+ info->port->control &= ~XMITBREAK; -+ -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ //restore_flags (flags); -+} -+ -+static int bcm_ioctl (struct tty_struct * tty, struct file * file, -+ unsigned int cmd, unsigned long arg) -+{ -+ int error; -+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; -+ int retval; -+ -+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && -+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && -+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) -+ { -+ if (tty->flags & (1 << TTY_IO_ERROR)) -+ return -EIO; -+ } -+ switch (cmd) -+ { -+ -+ case TCSBRK: /* SVID version: non-zero arg --> no break */ -+ retval = tty_check_change (tty); -+ if (retval) -+ return retval; -+ tty_wait_until_sent (tty, 0); -+ if (!arg) -+ send_break (info, HZ/4); /* 1/4 second */ -+ return 0; -+ -+ case TCSBRKP: /* support for POSIX tcsendbreak() */ -+ retval = tty_check_change (tty); -+ if (retval) -+ return retval; -+ tty_wait_until_sent (tty, 0); -+ send_break (info, arg ? arg*(HZ/10) : HZ/4); -+ return 0; -+ -+ case TIOCGSOFTCAR: -+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long)); -+ if (!error) -+ return -EFAULT; -+ else -+ { -+ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); -+ return 0; -+ } -+ -+ case TIOCSSOFTCAR: -+ error = get_user (arg, (unsigned long *)arg); -+ if (error) -+ return error; -+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); -+ return 0; -+ -+ case TIOCGSERIAL: -+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct)); -+ if (!error) -+ return -EFAULT; -+ else -+ return get_serial_info (info, (struct serial_struct *)arg); -+ -+ case TIOCSSERIAL: -+ return set_serial_info (info, (struct serial_struct *) arg); -+ -+ case TIOCSERGETLSR: /* Get line status register */ -+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int)); -+ if (!error) -+ return -EFAULT; -+ else -+ return get_lsr_info (info, (unsigned int *)arg); -+ -+ case TIOCSERGSTRUCT: -+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial)); -+ if (!error) -+ return -EFAULT; -+ else -+ { -+ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial)); -+ return 0; -+ } -+ -+ default: -+ return -ENOIOCTLCMD; -+ } -+ return 0; -+} -+ -+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ -+ if( tty->termios->c_cflag != old_termios->c_cflag ) -+ change_speed (info->port, tty->termios->c_cflag); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm63xx_cons_close() -+ * -+ * This routine is called when the serial port gets closed. First, we -+ * wait for the last remaining data to be sent. Then, we turn off -+ * the transmit enable and receive enable flags. -+ * ------------------------------------------------------------ -+ */ -+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp) -+{ -+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; -+ unsigned long flags; -+ -+ if (!info) -+ return; -+ -+ /*save_flags (flags); -+ cli();*/ -+ spin_lock_irqsave(&bcm963xx_serial_lock, flags); -+ -+ if (tty_hung_up_p (filp)) -+ { -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ //restore_flags (flags); -+ return; -+ } -+ -+ if ((tty->count == 1) && (info->count != 1)) -+ { -+ -+ /* Uh, oh. tty->count is 1, which means that the tty -+ * structure will be freed. Info->count should always -+ * be one in these conditions. If it's greater than -+ * one, we've got real problems, since it means the -+ * serial port won't be shutdown. -+ */ -+ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, " -+ "info->count is %d\n", info->count); -+ info->count = 1; -+ } -+ -+ if (--info->count < 0) -+ { -+ printk("ds_close: bad serial port count for ttys%d: %d\n", -+ info->line, info->count); -+ info->count = 0; -+ } -+ -+ if (info->count) -+ { -+ //restore_flags (flags); -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ return; -+ } -+ -+ /* Now we wait for the transmit buffer to clear; and we notify -+ * the line discipline to only process XON/XOFF characters. -+ */ -+ tty->closing = 1; -+ -+ /* At this point we stop accepting input. To do this, we -+ * disable the receive line status interrupts. -+ */ -+ shutdown (info); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ if (tty->driver->flush_buffer) -+ tty->driver->flush_buffer (tty); -+#else -+ if (tty->driver.flush_buffer) -+ tty->driver.flush_buffer (tty); -+#endif -+ if (tty->ldisc.flush_buffer) -+ tty->ldisc.flush_buffer (tty); -+ -+ tty->closing = 0; -+ info->event = 0; -+ info->tty = 0; -+ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num) -+ { -+ if (tty->ldisc.close) -+ (tty->ldisc.close)(tty); -+ tty->ldisc = *tty_ldisc_get(N_TTY); -+ tty->termios->c_line = N_TTY; -+ if (tty->ldisc.open) -+ (tty->ldisc.open)(tty); -+ } -+ if (info->blocked_open) -+ { -+ if (info->close_delay) -+ { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule_timeout(info->close_delay); -+ } -+ wake_up_interruptible (&info->open_wait); -+ } -+ wake_up_interruptible (&info->close_wait); -+ -+ //restore_flags (flags); -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+} -+ -+/* -+ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled. -+ */ -+static void bcm_hangup (struct tty_struct *tty) -+{ -+ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ -+ shutdown (info); -+ info->event = 0; -+ info->count = 0; -+ info->tty = 0; -+ wake_up_interruptible (&info->open_wait); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_open() and friends -+ * ------------------------------------------------------------ -+ */ -+static int block_til_ready (struct tty_struct *tty, struct file *filp, -+ struct bcm_serial *info) -+{ -+ return 0; -+} -+ -+/* -+ * This routine is called whenever a serial port is opened. It -+ * enables interrupts for a serial port. It also performs the -+ * serial-specific initialization for the tty structure. -+ */ -+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp) -+{ -+ struct bcm_serial *info; -+ int retval, line; -+ -+ // Make sure we're only opening on of the ports we support -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start; -+#else -+ line = MINOR(tty->device) - tty->driver.minor_start; -+#endif -+ -+ if ((line < 0) || (line >= BCM_NUM_UARTS)) -+ return -ENODEV; -+ -+ info = lines[line]; -+ -+ tty->low_latency=1; -+ info->port->intMask = 0; /* Clear any pending interrupts */ -+ info->port->intMask = RXINT; /* Enable RX */ -+ -+ info->count++; -+ tty->driver_data = info; -+ info->tty = tty; -+ BcmHalInterruptEnable (INTERRUPT_ID_UART); -+ -+ // Start up serial port -+ retval = startup (info); -+ if (retval) -+ return retval; -+ -+ retval = block_til_ready (tty, filp, info); -+ if (retval) -+ return retval; -+ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ info->pgrp = process_group(current); -+ info->session = current->signal->session; -+#else -+ info->session = current->session; -+ info->pgrp = current->pgrp; -+#endif -+ -+ return 0; -+} -+ -+ -+static struct tty_operations rs_ops = { -+ .open = bcm63xx_cons_open, -+ .close = bcm63xx_cons_close, -+ .write = bcm63xx_cons_write, -+ .flush_chars = bcm63xx_cons_flush_chars, -+ .write_room = bcm63xx_cons_write_room, -+ .chars_in_buffer = bcm_chars_in_buffer, -+ .flush_buffer = bcm_flush_buffer, -+ .ioctl = bcm_ioctl, -+ .throttle = bcm_throttle, -+ .unthrottle = bcm_unthrottle, -+ .send_xchar = bcm_send_xchar, -+ .set_termios = bcm_set_termios, -+ .stop = bcm_stop, -+ .start = bcm_start, -+ .hangup = bcm_hangup, -+}; -+ -+/* -------------------------------------------------------------------------- -+ Name: bcm63xx_serialinit -+ Purpose: Initialize our BCM63xx serial driver -+-------------------------------------------------------------------------- */ -+static int __init bcm63xx_serialinit(void) -+{ -+ int i, flags; -+ struct bcm_serial * info; -+ -+ // Print the driver version information -+ printk(VER_STR); -+ serial_driver = alloc_tty_driver(BCM_NUM_UARTS); -+ if (!serial_driver) -+ return -ENOMEM; -+ -+ serial_driver->owner = THIS_MODULE; -+// serial_driver->devfs_name = "tts/"; -+// serial_driver.magic = TTY_DRIVER_MAGIC; -+ serial_driver->name = "ttyS"; -+ serial_driver->major = TTY_MAJOR; -+ serial_driver->minor_start = 64; -+// serial_driver.num = BCM_NUM_UARTS; -+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL; -+ serial_driver->subtype = SERIAL_TYPE_NORMAL; -+ serial_driver->init_termios = tty_std_termios; -+ serial_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; -+ serial_driver->flags = TTY_DRIVER_REAL_RAW; -+ -+ serial_driver->termios = serial_termios; -+ serial_driver->termios_locked = serial_termios_locked; -+ -+ tty_set_operations(serial_driver, &rs_ops); -+ -+ if (tty_register_driver (serial_driver)) -+ panic("Couldn't register serial driver\n"); -+ -+ //save_flags(flags); cli(); -+ spin_lock_irqsave(&bcm963xx_serial_lock, flags); -+ -+ for (i = 0; i < BCM_NUM_UARTS; i++) -+ { -+ info = &multi[i]; -+ lines[i] = info; -+ info->magic = SERIAL_MAGIC; -+ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20)); -+ info->tty = 0; -+ info->irq = (2 - i) + 8; -+ info->line = i; -+ info->close_delay = 50; -+ info->closing_wait = 3000; -+ info->x_char = 0; -+ info->event = 0; -+ info->count = 0; -+ info->blocked_open = 0; -+ info->normal_termios = serial_driver->init_termios; -+ init_waitqueue_head(&info->open_wait); -+ init_waitqueue_head(&info->close_wait); -+ -+ /* If we are pointing to address zero then punt - not correctly -+ * set up in setup.c to handle this. -+ */ -+ if (! info->port) -+ return 0; -+ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); -+ } -+ -+ /* order matters here... the trick is that flags -+ * is updated... in request_irq - to immediatedly obliterate -+ * it is unwise. -+ */ -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ return 0; -+} -+ -+module_init(bcm63xx_serialinit); -+ -+/* -------------------------------------------------------------------------- -+ Name: bcm_console_print -+ Purpose: bcm_console_print is registered for printk. -+ The console_lock must be held when we get here. -+-------------------------------------------------------------------------- */ -+static void bcm_console_print (struct console * cons, const char * str, -+ unsigned int count) -+{ -+ unsigned int i; -+ //_puts(str); -+ for(i=0; i<count; i++, str++) -+ { -+ _putc(*str); -+ if (*str == 10) -+ { -+ _putc(13); -+ } -+ } -+} -+ -+static struct tty_driver * bcm_console_device(struct console * c, int *index) -+{ -+ *index = c->index; -+ return serial_driver; -+} -+ -+static int __init bcm_console_setup(struct console * co, char * options) -+{ -+ return 0; -+} -+ -+static struct console bcm_sercons = { -+ .name = "ttyS", -+ .write = bcm_console_print, -+ .device = bcm_console_device, -+ .setup = bcm_console_setup, -+ .flags = CON_PRINTBUFFER, -+ .index = -1, -+}; -+ -+static int __init bcm63xx_console_init(void) -+{ -+ register_console(&bcm_sercons); -+ return 0; -+} -+ -+console_initcall(bcm63xx_console_init); diff -urN linux-2.6.19/include/asm-mips/bootinfo.h linux-2.6.19.new/include/asm-mips/bootinfo.h --- linux-2.6.19/include/asm-mips/bootinfo.h 2006-11-29 22:57:37.000000000 +0100 +++ linux-2.6.19.new/include/asm-mips/bootinfo.h 2006-12-16 18:46:31.000000000 +0100 @@ -9581,46 +192,6 @@ diff -urN linux-2.6.19/include/asm-mips/cpu.h linux-2.6.19.new/include/asm-mips/ /* * ISA Level encodings -diff -urN linux-2.6.19/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux-2.6.19.new/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h ---- linux-2.6.19/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-12-16 18:52:30.000000000 +0100 -@@ -0,0 +1,36 @@ -+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_has_tlb 1 -+#define cpu_has_4kex 4 -+#define cpu_has_4ktlb 8 -+#define cpu_has_fpu 0 -+#define cpu_has_32fpr 0 -+#define cpu_has_counter 0x40 -+#define cpu_has_watch 0 -+#define cpu_has_mips16 0 -+#define cpu_has_divec 0x200 -+#define cpu_has_vce 0 -+#define cpu_has_cache_cdex_p 0 -+#define cpu_has_cache_cdex_s 0 -+#define cpu_has_prefetch 0x40000 -+#define cpu_has_mcheck 0x2000 -+#define cpu_has_ejtag 0x4000 -+#define cpu_has_llsc 0x10000 -+#define cpu_has_vtag_icache 0 -+#define cpu_has_dc_aliases 0 -+#define cpu_has_ic_fills_f_dc 0 -+ -+#define cpu_has_nofpuex 0 -+#define cpu_has_64bits 0 -+#define cpu_has_64bit_zero_reg 0 -+#define cpu_has_64bit_gp_regs 0 -+#define cpu_has_64bit_addresses 0 -+ -+#define cpu_has_subset_pcaches 0 -+ -+#define cpu_dcache_line_size() 16 -+#define cpu_icache_line_size() 16 -+#define cpu_scache_line_size() 0 -+ -+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ diff -urN linux-2.6.19/include/asm-mips/module.h linux-2.6.19.new/include/asm-mips/module.h --- linux-2.6.19/include/asm-mips/module.h 2006-11-29 22:57:37.000000000 +0100 +++ linux-2.6.19.new/include/asm-mips/module.h 2006-12-16 19:03:22.000000000 +0100 diff --git a/target/linux/brcm63xx-2.6/patches/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx-2.6/patches/040-bcm963xx_flashmap.patch index 83414c844a..82a2c94059 100644 --- a/target/linux/brcm63xx-2.6/patches/040-bcm963xx_flashmap.patch +++ b/target/linux/brcm63xx-2.6/patches/040-bcm963xx_flashmap.patch @@ -23,287 +23,6 @@ diff -urN linux-2.6.19/drivers/mtd/maps/Makefile linux-2.6.19.new/drivers/mtd/ma obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o obj-$(CONFIG_MTD_TQM834x) += tqm834x.o +obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o -diff -urN linux-2.6.19/drivers/mtd/maps/bcm963xx-flash.c linux-2.6.19.new/drivers/mtd/maps/bcm963xx-flash.c ---- linux-2.6.19/drivers/mtd/maps/bcm963xx-flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.new/drivers/mtd/maps/bcm963xx-flash.c 2006-12-18 17:21:07.000000000 +0100 -@@ -0,0 +1,277 @@ -+/* -+ * $Id$ -+ * Copyright (C) 2006 Florian Fainelli <florian@openwrt.org> -+ * Mike Albon <malbon@openwrt.org> -+ * Copyright (C) $Date$ $Author$ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+/* This is the BCM963xx flash map driver, in its actual state it only supports BCM96348 devices -+ * this driver is able to manage both bootloader we found on these boards : CFE and RedBoot -+ * -+ * RedBoot : -+ * - this bootloader allows us to parse partitions and therefore deduce the MTD partition table -+ * -+ * CFE : -+ * - CFE partitionning can be detected as for BCM947xx devices -+ * -+ */ -+ -+#include <asm/io.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/mtd/map.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/vmalloc.h> -+#include <board.h> -+ -+#define WINDOW_ADDR 0x1FC00000 /* Real address of the flash */ -+#define WINDOW_SIZE 0x400000 /* Size of flash */ -+#define BUSWIDTH 2 /* Buswidth */ -+#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */ -+#define IMAGE_LEN 10 /* Length of Length Field */ -+#define ADDRESS_LEN 12 /* Length of Address field */ -+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) -+ -+extern int boot_loader_type; /* For RedBoot / CFE detection */ -+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin); -+static struct mtd_partition *parsed_parts; -+ -+static void __exit bcm963xx_mtd_cleanup(void); -+ -+static struct mtd_info *bcm963xx_mtd_info; -+ -+static struct map_info bcm963xx_map = { -+ .name = "bcm963xx", -+ .size = WINDOW_SIZE, -+ .bankwidth = BUSWIDTH, -+ .phys = WINDOW_ADDR, -+}; -+ -+ -+int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts) -+{ -+ int nrparts = 2, curpart = 0; // CFE and NVRAM always present. -+ struct bcm963xx_cfe_map { -+ unsigned char tagVersion[4]; // Version of the image tag -+ unsigned char sig_1[20]; // Company Line 1 -+ unsigned char sig_2[14]; // Company Line 2 -+ unsigned char chipid[6]; // Chip this image is for -+ unsigned char boardid[16]; // Board name -+ unsigned char bigEndian[2]; // Map endianness -- 1 BE 0 LE -+ unsigned char totalLength[IMAGE_LEN]; //Total length of image -+ unsigned char cfeAddress[ADDRESS_LEN]; // Address in memory of CFE -+ unsigned char cfeLength[IMAGE_LEN]; // Size of CFE -+ unsigned char rootAddress[ADDRESS_LEN]; // Address in memory of rootfs -+ unsigned char rootLength[IMAGE_LEN]; // Size of rootfs -+ unsigned char kernelAddress[ADDRESS_LEN]; // Address in memory of kernel -+ unsigned char kernelLength[IMAGE_LEN]; // Size of kernel -+ unsigned char dualImage[2]; // Unused at present -+ unsigned char inactiveFlag[2]; // Unused at present -+ unsigned char reserved1[74]; // Reserved area not in use -+ unsigned char imageCRC[4]; // CRC32 of images -+ unsigned char reserved2[16]; // Unused at present -+ unsigned char headerCRC[4]; // CRC32 of header excluding tagVersion -+ unsigned char reserved3[16]; // Unused at present -+ } *buf; -+ struct mtd_partition *parts; -+ int ret; -+ size_t retlen; -+ unsigned int rootfsaddr, kerneladdr, spareaddr; -+ unsigned int rootfslen, kernellen, sparelen, totallen; -+ int namelen = 0; -+ int i; -+ // Allocate memory for buffer -+ buf = vmalloc(sizeof(struct bcm963xx_cfe_map)); -+ -+ if (!buf) -+ return -ENOMEM; -+ -+ // Get the tag -+ ret = master->read(master,master->erasesize,sizeof(struct bcm963xx_cfe_map), &retlen, (void *)buf); -+ if (retlen != sizeof(struct bcm963xx_cfe_map)){ -+ vfree(buf); -+ return -EIO; -+ }; -+ printk("bcm963xx: CFE boot tag found with version %s and board type %s.\n",buf->tagVersion,buf->boardid); -+ // Get the values and calculate -+ sscanf(buf->rootAddress,"%u", &rootfsaddr); -+ rootfsaddr = rootfsaddr - EXTENDED_SIZE; -+ sscanf(buf->rootLength, "%u", &rootfslen); -+ sscanf(buf->kernelAddress, "%u", &kerneladdr); -+ kerneladdr = kerneladdr - EXTENDED_SIZE; -+ sscanf(buf->kernelLength, "%u", &kernellen); -+ sscanf(buf->totalLength, "%u", &totallen); -+ spareaddr = ROUNDUP(totallen,master->erasesize) + master->erasesize; -+ sparelen = master->size - spareaddr - master->erasesize; -+ // Determine number of partitions -+ namelen = 8; -+ if (rootfslen > 0){ -+ nrparts++; -+ namelen =+ 6; -+ }; -+ if (kernellen > 0){ -+ nrparts++; -+ namelen =+ 6; -+ }; -+ if (sparelen > 0){ -+ nrparts++; -+ namelen =+ 6; -+ }; -+ // Ask kernel for more memory. -+ parts = kmalloc(sizeof(*parts)*nrparts+10*nrparts, GFP_KERNEL); -+ if (!parts){ -+ vfree(buf); -+ return -ENOMEM; -+ }; -+ memset(parts,0,sizeof(*parts)*nrparts+10*nrparts); -+ // Start building partition list -+ parts[curpart].name = "CFE"; -+ parts[curpart].offset = 0; -+ parts[curpart].size = master->erasesize; -+ curpart++; -+ if (kernellen > 0){ -+ parts[curpart].name = "Kernel"; -+ parts[curpart].offset = kerneladdr; -+ parts[curpart].size = kernellen; -+ curpart++; -+ }; -+ if (rootfslen > 0){ -+ parts[curpart].name = "Rootfs"; -+ parts[curpart].offset = rootfsaddr; -+ parts[curpart].size = rootfslen; -+ curpart++; -+ }; -+ if (sparelen > 0){ -+ parts[curpart].name = "OpenWrt"; -+ parts[curpart].offset = spareaddr; -+ parts[curpart].size = sparelen; -+ curpart++; -+ }; -+ parts[curpart].name = "NVRAM"; -+ parts[curpart].offset = master->size - master->erasesize; -+ parts[curpart].size = master->erasesize; -+ for (i = 0; i < nrparts; i++) { -+ printk("bcm963xx: Partition %d is %s offset %x and length %x\n", i, parts[i].name, parts[i].offset, parts[i].size); -+ } -+ *pparts = parts; -+ vfree(buf); -+ return nrparts; -+}; -+ -+static struct mtd_partition bcm963xx_parts[] = { -+ { name: "bootloader", size: 0, offset: 0, mask_flags: MTD_WRITEABLE }, -+ { name: "rootfs", size: 0, offset: 0}, -+ { name: "jffs2", size: 5 * 0x10000, offset: 57*0x10000} -+}; -+ -+static int bcm963xx_parts_size = sizeof(bcm963xx_parts) / sizeof(bcm963xx_parts[0]); -+ -+static int bcm963xx_detect_cfe(struct mtd_info *master) -+{ -+ int idoffset = 0x4e0; -+ static char idstring[8] = "CFE1CFE1"; -+ char buf[8]; -+ int ret; -+ size_t retlen; -+ -+ ret = master->read(master, idoffset, 8, &retlen, (void *)buf); -+ printk("bcm963xx: Read Signature value of %s\n", buf); -+ return strcmp(idstring,buf); -+} -+ -+static int __init bcm963xx_mtd_init(void) -+{ -+ printk("bcm963xx: 0x%08x at 0x%08x\n", WINDOW_SIZE, WINDOW_ADDR); -+ bcm963xx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); -+ -+ if (!bcm963xx_map.virt) { -+ printk("bcm963xx: Failed to ioremap\n"); -+ return -EIO; -+ } -+ -+ simple_map_init(&bcm963xx_map); -+ -+ bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map); -+ -+ if (bcm963xx_mtd_info) { -+ bcm963xx_mtd_info->owner = THIS_MODULE; -+ -+ //if (boot_loader_type == BOOT_CFE) -+ if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0) -+ { -+ int parsed_nr_parts = 0; -+ char * part_type; -+ printk("bcm963xx: CFE bootloader detected\n"); -+ //add_mtd_device(bcm963xx_mtd_info); -+ //add_mtd_partitions(bcm963xx_mtd_info, bcm963xx_parts, bcm963xx_parts_size); -+ if (parsed_nr_parts == 0) { -+ int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts); -+ if (ret > 0) { -+ part_type = "CFE"; -+ parsed_nr_parts = ret; -+ } -+ } -+ add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts); -+ return 0; -+ } -+ else -+ { -+ int parsed_nr_parts = 0; -+ char * part_type; -+ -+ if (bcm963xx_mtd_info->size > 0x00400000) { -+ printk("Support for extended flash memory size : 0x%08X ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size); -+ bcm963xx_map.virt = (unsigned long)(EXTENDED_SIZE); -+ } -+ -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ if (parsed_nr_parts == 0) { -+ int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0); -+ if (ret > 0) { -+ part_type = "RedBoot"; -+ parsed_nr_parts = ret; -+ } -+ } -+#endif -+ add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts); -+ -+ return 0; -+ } -+ } -+ iounmap(bcm963xx_map.virt); -+ return -ENXIO; -+} -+ -+static void __exit bcm963xx_mtd_cleanup(void) -+{ -+ if (bcm963xx_mtd_info) { -+ del_mtd_partitions(bcm963xx_mtd_info); -+ map_destroy(bcm963xx_mtd_info); -+ } -+ -+ if (bcm963xx_map.virt) { -+ iounmap(bcm963xx_map.virt); -+ bcm963xx_map.virt = 0; -+ } -+} -+ -+module_init(bcm963xx_mtd_init); -+module_exit(bcm963xx_mtd_cleanup); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org> Mike Albon <malbon@openwrt.org>"); diff -urN linux-2.6.19/drivers/mtd/redboot.c linux-2.6.19.new/drivers/mtd/redboot.c --- linux-2.6.19/drivers/mtd/redboot.c 2006-12-18 17:09:14.000000000 +0100 +++ linux-2.6.19.new/drivers/mtd/redboot.c 2006-12-18 17:14:26.000000000 +0100 diff --git a/target/linux/brcm63xx-2.6/patches/100-atm_hacks.patch b/target/linux/brcm63xx-2.6/patches/100-atm_hacks.patch index 910b9da3f8..7535c223e7 100644 --- a/target/linux/brcm63xx-2.6/patches/100-atm_hacks.patch +++ b/target/linux/brcm63xx-2.6/patches/100-atm_hacks.patch @@ -184,55 +184,3 @@ diff -urN linux-2.6.19.1/include/linux/atmdev.h linux-2.6.19.1.new/include/linux } -diff -urN linux-2.6.19.1/include/linux/atmrt2684.h linux-2.6.19.1.new/include/linux/atmrt2684.h ---- linux-2.6.19.1/include/linux/atmrt2684.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.1.new/include/linux/atmrt2684.h 2007-01-07 18:40:39.000000000 +0100 -@@ -0,0 +1,48 @@ -+#ifndef _LINUX_ATMRT2684_H -+#define _LINUX_ATMRT2684_H -+ -+#include <linux/atm.h> -+#include <linux/if.h> /* For IFNAMSIZ */ -+ -+#define RT2684_ENCAPS_NULL (0) /* VC-mux */ -+#define RT2684_ENCAPS_LLC (1) -+#define RT2684_ENCAPS_AUTODETECT (2) /* Unsuported */ -+ -+/* -+ * This is for the ATM_NEWBACKENDIF call - these are like socket families: -+ * the first element of the structure is the backend number and the rest -+ * is per-backend specific -+ */ -+struct atm_newif_rt2684 { -+ atm_backend_t backend_num; /* ATM_BACKEND_RT2684 */ -+ char ifname[IFNAMSIZ]; -+}; -+ -+/* -+ * This structure is used to specify a rt2684 interface - either by a -+ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name -+ */ -+#define RT2684_FIND_BYNOTHING (0) -+#define RT2684_FIND_BYNUM (1) -+#define RT2684_FIND_BYIFNAME (2) -+struct rt2684_if_spec { -+ int method; /* RT2684_FIND_* */ -+ union { -+ char ifname[IFNAMSIZ]; -+ int devnum; -+ } spec; -+}; -+ -+/* -+ * This is for the ATM_SETBACKEND call - these are like socket families: -+ * the first element of the structure is the backend number and the rest -+ * is per-backend specific -+ */ -+struct atm_backend_rt2684 { -+ atm_backend_t backend_num; /* ATM_BACKEND_RT2684 */ -+ struct rt2684_if_spec ifspec; -+ unsigned char encaps; /* RT2684_ENCAPS_* */ -+}; -+ -+ -+#endif /* _LINUX_ATMRT2684_H */ |