diff options
author | John Crispin <blogic@openwrt.org> | 2015-07-17 12:48:39 +0000 |
---|---|---|
committer | John Crispin <blogic@openwrt.org> | 2015-07-17 12:48:39 +0000 |
commit | 5557174f793f95c1026b5412e721daa083a77e24 (patch) | |
tree | f7241e26cb7a88d2490021a1c2053c088d4a5256 /target/linux/brcm2708/patches-4.1/0076-bcm2835-sdhost-Improve-error-handling-and-recovery.patch | |
parent | 0ac89d02198acd85904e22559a0936c70fbfb294 (diff) | |
download | master-187ad058-5557174f793f95c1026b5412e721daa083a77e24.tar.gz master-187ad058-5557174f793f95c1026b5412e721daa083a77e24.tar.bz2 master-187ad058-5557174f793f95c1026b5412e721daa083a77e24.zip |
brcm2708: add linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46399 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0076-bcm2835-sdhost-Improve-error-handling-and-recovery.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.1/0076-bcm2835-sdhost-Improve-error-handling-and-recovery.patch | 1088 |
1 files changed, 1088 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0076-bcm2835-sdhost-Improve-error-handling-and-recovery.patch b/target/linux/brcm2708/patches-4.1/0076-bcm2835-sdhost-Improve-error-handling-and-recovery.patch new file mode 100644 index 0000000000..f80e52ee30 --- /dev/null +++ b/target/linux/brcm2708/patches-4.1/0076-bcm2835-sdhost-Improve-error-handling-and-recovery.patch @@ -0,0 +1,1088 @@ +From 175d8f77d2fe5ed0d43d53ece08978fd50c97a97 Mon Sep 17 00:00:00 2001 +From: Phil Elwell <phil@raspberrypi.org> +Date: Wed, 17 Jun 2015 11:36:53 +0100 +Subject: [PATCH 076/121] bcm2835-sdhost: Improve error handling and recovery + +1) Expose the hw_reset method to the MMC framework, removing many + internal calls by the driver. + +2) Reduce overclock setting on error. + +3) Increase timeout to cope with high capacity cards. + +4) Add properties and parameters to control pio_limit and debug. + +5) Reduce messages at probe time. +--- + arch/arm/boot/dts/overlays/README | 8 +- + arch/arm/boot/dts/overlays/sdhost-overlay.dts | 4 +- + drivers/mmc/host/bcm2835-sdhost.c | 578 ++++++++++++++++++-------- + 3 files changed, 404 insertions(+), 186 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -408,7 +408,13 @@ Info: Selects the bcm2835-sdhost SD/MM + Load: dtoverlay=sdhost,<param>=<val> + Params: overclock_50 Clock (in MHz) to use when the MMC framework + requests 50MHz +- force_pio Disable DMA support ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 2) ++ ++ debug Enable debug output (default off) + + + Name: spi-bcm2708 +--- a/arch/arm/boot/dts/overlays/sdhost-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts +@@ -22,6 +22,7 @@ + dma-names = "tx", "rx"; + brcm,delay-after-stop = <0>; + brcm,overclock-50 = <0>; ++ brcm,pio-limit = <2>; + status = "okay"; + }; + }; +@@ -70,9 +71,10 @@ + }; + + __overrides__ { +- delay_after_stop = <&sdhost>,"brcm,delay-after-stop:0"; + overclock_50 = <&sdhost>,"brcm,overclock-50:0"; + force_pio = <&sdhost>,"brcm,force-pio?"; ++ pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ debug = <&sdhost>,"brcm,debug?"; + sdhost_freq = <&clk_sdhost>,"clock-frequency:0"; + }; + }; +--- a/drivers/mmc/host/bcm2835-sdhost.c ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -90,9 +90,8 @@ + /* Reserved */ + #define SDHSTS_DATA_FLAG 0x01 + +-#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC16_ERROR|SDHSTS_REW_TIME_OUT|SDHSTS_FIFO_ERROR) ++#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR|SDHSTS_CRC16_ERROR|SDHSTS_REW_TIME_OUT|SDHSTS_FIFO_ERROR) + #define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT|SDHSTS_TRANSFER_ERROR_MASK) +-/* SDHSTS_CRC7_ERROR - ignore this as MMC cards generate this spuriously */ + + #define SDHCFG_BUSY_IRPT_EN (1<<10) + #define SDHCFG_BLOCK_IRPT_EN (1<<8) +@@ -111,16 +110,7 @@ + #define SDEDM_READ_THRESHOLD_SHIFT 14 + #define SDEDM_THRESHOLD_MASK 0x1f + +-/* the inclusive limit in bytes under which PIO will be used instead of DMA */ +-#ifdef CONFIG_MMC_BCM2835_SDHOST_PIO_DMA_BARRIER +-#define PIO_DMA_BARRIER CONFIG_MMC_BCM2835_SDHOST_PIO_DMA_BARRIER +-#else +-#define PIO_DMA_BARRIER 0 +-#endif +- +-#define MIN_FREQ 400000 +-#define TIMEOUT_VAL 0xE +-#define BCM2835_SDHOST_WRITE_DELAY(f) (((2 * 1000000) / f) + 1) ++#define MHZ 1000000 + + #ifndef BCM2708_PERI_BASE + #define BCM2708_PERI_BASE 0x20000000 +@@ -138,19 +128,20 @@ struct bcm2835_host { + + struct mmc_host *mmc; + +- u32 timeout; ++ u32 pio_timeout; /* In jiffies */ + + int clock; /* Current clock speed */ + + bool slow_card; /* Force 11-bit divisor */ + + unsigned int max_clk; /* Max possible freq */ +- unsigned int timeout_clk; /* Timeout freq (KHz) */ + + struct tasklet_struct finish_tasklet; /* Tasklet structures */ + + struct timer_list timer; /* Timer for timeouts */ + ++ struct timer_list pio_timer; /* PIO error detection timer */ ++ + struct sg_mapping_iter sg_miter; /* SG state for PIO */ + unsigned int blocks; /* remaining PIO blocks */ + +@@ -170,6 +161,10 @@ struct bcm2835_host { + + unsigned int use_busy:1; /* Wait for busy interrupt */ + ++ unsigned int reduce_overclock:1; /* ...at the next opportunity */ ++ ++ unsigned int debug:1; /* Enable debug output */ ++ + u32 thread_isr; + + /*DMA part*/ +@@ -185,7 +180,8 @@ struct bcm2835_host { + struct timeval stop_time; /* when the last stop was issued */ + u32 delay_after_stop; /* minimum time between stop and subsequent data transfer */ + u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */ +- u32 max_overclock; /* Highest reported */ ++ u32 overclock; /* Current frequency if overclocked, else zero */ ++ u32 pio_limit; /* Maximum block count for PIO (0 = always DMA) */ + }; + + +@@ -204,41 +200,79 @@ static inline u32 bcm2835_sdhost_read_re + return readl_relaxed(host->ioaddr + reg); + } + ++static void bcm2835_sdhost_dumpcmd(struct bcm2835_host *host, ++ struct mmc_command *cmd, ++ const char *label) ++{ ++ if (cmd) ++ pr_info("%s:%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n", ++ mmc_hostname(host->mmc), ++ (cmd == host->cmd) ? '>' : ' ', ++ label, cmd->opcode, cmd->arg, cmd->flags, ++ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], ++ cmd->error); ++} ++ + static void bcm2835_sdhost_dumpregs(struct bcm2835_host *host) + { +- pr_info(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", ++ bcm2835_sdhost_dumpcmd(host, host->mrq->sbc, "sbc"); ++ bcm2835_sdhost_dumpcmd(host, host->mrq->cmd, "cmd"); ++ if (host->mrq->data) ++ pr_err("%s: data blocks %x blksz %x - err %d\n", ++ mmc_hostname(host->mmc), ++ host->mrq->data->blocks, ++ host->mrq->data->blksz, ++ host->mrq->data->error); ++ bcm2835_sdhost_dumpcmd(host, host->mrq->stop, "stop"); ++ ++ pr_info("%s: =========== REGISTER DUMP ===========\n", + mmc_hostname(host->mmc)); + +- pr_info(DRIVER_NAME ": SDCMD 0x%08x\n", ++ pr_info("%s: SDCMD 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDCMD)); +- pr_info(DRIVER_NAME ": SDARG 0x%08x\n", ++ pr_info("%s: SDARG 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDARG)); +- pr_info(DRIVER_NAME ": SDTOUT 0x%08x\n", ++ pr_info("%s: SDTOUT 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDTOUT)); +- pr_info(DRIVER_NAME ": SDCDIV 0x%08x\n", ++ pr_info("%s: SDCDIV 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDCDIV)); +- pr_info(DRIVER_NAME ": SDRSP0 0x%08x\n", ++ pr_info("%s: SDRSP0 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDRSP0)); +- pr_info(DRIVER_NAME ": SDRSP1 0x%08x\n", ++ pr_info("%s: SDRSP1 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDRSP1)); +- pr_info(DRIVER_NAME ": SDRSP2 0x%08x\n", ++ pr_info("%s: SDRSP2 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDRSP2)); +- pr_info(DRIVER_NAME ": SDRSP3 0x%08x\n", ++ pr_info("%s: SDRSP3 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDRSP3)); +- pr_info(DRIVER_NAME ": SDHSTS 0x%08x\n", ++ pr_info("%s: SDHSTS 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDHSTS)); +- pr_info(DRIVER_NAME ": SDVDD 0x%08x\n", ++ pr_info("%s: SDVDD 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDVDD)); +- pr_info(DRIVER_NAME ": SDEDM 0x%08x\n", ++ pr_info("%s: SDEDM 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDEDM)); +- pr_info(DRIVER_NAME ": SDHCFG 0x%08x\n", ++ pr_info("%s: SDHCFG 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDHCFG)); +- pr_info(DRIVER_NAME ": SDHBCT 0x%08x\n", ++ pr_info("%s: SDHBCT 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDHBCT)); +- pr_info(DRIVER_NAME ": SDHBLC 0x%08x\n", ++ pr_info("%s: SDHBLC 0x%08x\n", ++ mmc_hostname(host->mmc), + bcm2835_sdhost_read(host, SDHBLC)); + +- pr_debug(DRIVER_NAME ": ===========================================\n"); ++ pr_info("%s: ===========================================\n", ++ mmc_hostname(host->mmc)); + } + + +@@ -248,12 +282,10 @@ static void bcm2835_sdhost_set_power(str + } + + +-static void bcm2835_sdhost_reset(struct bcm2835_host *host) ++static void bcm2835_sdhost_reset_internal(struct bcm2835_host *host) + { + u32 temp; + +- pr_debug("bcm2835_sdhost_reset\n"); +- + bcm2835_sdhost_set_power(host, false); + + bcm2835_sdhost_write(host, 0, SDCMD); +@@ -281,6 +313,20 @@ static void bcm2835_sdhost_reset(struct + mmiowb(); + } + ++ ++static void bcm2835_sdhost_reset(struct mmc_host *mmc) ++{ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ if (host->debug) ++ pr_info("%s: reset\n", mmc_hostname(mmc)); ++ spin_lock_irqsave(&host->lock, flags); ++ ++ bcm2835_sdhost_reset_internal(host); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ + static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); + + static void bcm2835_sdhost_init(struct bcm2835_host *host, int soft) +@@ -290,7 +336,7 @@ static void bcm2835_sdhost_init(struct b + /* Set interrupt enables */ + host->hcfg = SDHCFG_BUSY_IRPT_EN; + +- bcm2835_sdhost_reset(host); ++ bcm2835_sdhost_reset_internal(host); + + if (soft) { + /* force clock reconfiguration */ +@@ -420,6 +466,40 @@ static void bcm2835_sdhost_dma_complete( + spin_unlock_irqrestore(&host->lock, flags); + } + ++static bool data_transfer_wait(struct bcm2835_host *host, const char *caller) ++{ ++ unsigned long timeout = 1000000; ++ u32 hsts; ++ while (timeout) ++ { ++ hsts = bcm2835_sdhost_read(host, SDHSTS); ++ if (hsts & (SDHSTS_TRANSFER_ERROR_MASK | ++ SDHSTS_DATA_FLAG)) { ++ bcm2835_sdhost_write(host, SDHSTS_TRANSFER_ERROR_MASK, ++ SDHSTS); ++ break; ++ } ++ timeout--; ++ } ++ ++ if (hsts & (SDHSTS_CRC16_ERROR | ++ SDHSTS_CRC7_ERROR | ++ SDHSTS_FIFO_ERROR)) { ++ pr_err("%s: data error in %s - HSTS %x\n", ++ mmc_hostname(host->mmc), caller, hsts); ++ host->data->error = -EILSEQ; ++ return false; ++ } else if ((timeout == 0) || ++ (hsts & (SDHSTS_CMD_TIME_OUT | ++ SDHSTS_REW_TIME_OUT))) { ++ pr_err("%s: timeout in %s - HSTS %x\n", ++ mmc_hostname(host->mmc), caller, hsts); ++ host->data->error = -ETIMEDOUT; ++ return false; ++ } ++ return true; ++} ++ + static void bcm2835_sdhost_read_block_pio(struct bcm2835_host *host) + { + unsigned long flags; +@@ -443,35 +523,15 @@ static void bcm2835_sdhost_read_block_pi + buf = (u32 *)host->sg_miter.addr; + + while (len) { +- while (1) { +- u32 hsts; +- hsts = bcm2835_sdhost_read(host, SDHSTS); +- if (hsts & SDHSTS_DATA_FLAG) +- break; +- +- if (hsts & SDHSTS_ERROR_MASK) { +- pr_err("%s: Transfer error - HSTS %x, HBCT %x - %x left\n", +- mmc_hostname(host->mmc), +- hsts, +- bcm2835_sdhost_read(host, SDHBCT), +- blksize + len); +- if (hsts & SDHSTS_REW_TIME_OUT) +- host->data->error = -ETIMEDOUT; +- else if (hsts & (SDHSTS_CRC16_ERROR || +- SDHSTS_CRC7_ERROR)) +- host->data->error = -EILSEQ; +- else { +- pr_err("%s: unexpected data error\n", +- mmc_hostname(host->mmc)); +- bcm2835_sdhost_dumpregs(host); +- host->cmd->error = -EIO; +- } +- } +- } ++ if (!data_transfer_wait(host, "read_block_pio")) ++ break; + + *(buf++) = bcm2835_sdhost_read(host, SDDATA); + len -= 4; + } ++ ++ if (host->data->error) ++ break; + } + + sg_miter_stop(&host->sg_miter); +@@ -502,11 +562,15 @@ static void bcm2835_sdhost_write_block_p + buf = host->sg_miter.addr; + + while (len) { +- while (!(bcm2835_sdhost_read(host, SDHSTS) & SDHSTS_DATA_FLAG)) +- continue; ++ if (!data_transfer_wait(host, "write_block_pio")) ++ break; ++ + bcm2835_sdhost_write(host, *(buf++), SDDATA); + len -= 4; + } ++ ++ if (host->data->error) ++ break; + } + + sg_miter_stop(&host->sg_miter); +@@ -519,10 +583,15 @@ static void bcm2835_sdhost_transfer_pio( + { + BUG_ON(!host->data); + +- if (host->data->flags & MMC_DATA_READ) ++ if (host->data->flags & MMC_DATA_READ) { + bcm2835_sdhost_read_block_pio(host); +- else ++ } else { + bcm2835_sdhost_write_block_pio(host); ++ ++ /* Start a timer in case a transfer error occurs because ++ there is no error interrupt */ ++ mod_timer(&host->pio_timer, jiffies + host->pio_timeout); ++ } + } + + +@@ -607,6 +676,7 @@ static void bcm2835_sdhost_prepare_data( + host->flush_fifo = 0; + host->data->bytes_xfered = 0; + ++ host->use_dma = host->have_dma && (data->blocks > host->pio_limit); + if (!host->use_dma) { + int flags; + +@@ -619,8 +689,6 @@ static void bcm2835_sdhost_prepare_data( + host->blocks = data->blocks; + } + +- host->use_dma = host->have_dma && data->blocks > PIO_DMA_BARRIER; +- + bcm2835_sdhost_set_transfer_irqs(host); + + bcm2835_sdhost_write(host, data->blksz, SDHBCT); +@@ -638,22 +706,25 @@ void bcm2835_sdhost_send_command(struct + + WARN_ON(host->cmd); + +- if (1) { +- pr_debug("bcm2835_sdhost_send_command: %08x %08x (flags %x)\n", +- cmd->opcode, cmd->arg, (cmd->flags & 0xff) | (cmd->data ? cmd->data->flags : 0)); +- if (cmd->data) +- pr_debug("bcm2835_sdhost_send_command: %s %d*%x\n", +- (cmd->data->flags & MMC_DATA_READ) ? +- "read" : "write", cmd->data->blocks, +- cmd->data->blksz); +- } ++ if (cmd->data) ++ pr_debug("%s: send_command %d 0x%x " ++ "(flags 0x%x) - %s %d*%d\n", ++ mmc_hostname(host->mmc), ++ cmd->opcode, cmd->arg, cmd->flags, ++ (cmd->data->flags & MMC_DATA_READ) ? ++ "read" : "write", cmd->data->blocks, ++ cmd->data->blksz); ++ else ++ pr_debug("%s: send_command %d 0x%x (flags 0x%x)\n", ++ mmc_hostname(host->mmc), ++ cmd->opcode, cmd->arg, cmd->flags); + + /* Wait max 10 ms */ + timeout = 1000; + + while (bcm2835_sdhost_read(host, SDCMD) & SDCMD_NEW_FLAG) { + if (timeout == 0) { +- pr_err("%s: Previous command never completed.\n", ++ pr_err("%s: previous command never completed.\n", + mmc_hostname(host->mmc)); + bcm2835_sdhost_dumpregs(host); + cmd->error = -EIO; +@@ -666,16 +737,16 @@ void bcm2835_sdhost_send_command(struct + + if ((1000-timeout)/100 > 1 && (1000-timeout)/100 > host->max_delay) { + host->max_delay = (1000-timeout)/100; +- pr_warning("Warning: SDHost controller hung for %d ms\n", host->max_delay); ++ pr_warning("%s: controller hung for %d ms\n", ++ mmc_hostname(host->mmc), ++ host->max_delay); + } + + timeout = jiffies; +-#ifdef CONFIG_ARCH_BCM2835 + if (!cmd->data && cmd->busy_timeout > 9000) + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; + else +-#endif +- timeout += 10 * HZ; ++ timeout += 10 * HZ; + mod_timer(&host->timer, timeout); + + host->cmd = cmd; +@@ -685,7 +756,7 @@ void bcm2835_sdhost_send_command(struct + bcm2835_sdhost_write(host, cmd->arg, SDARG); + + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { +- pr_err("%s: Unsupported response type!\n", ++ pr_err("%s: unsupported response type!\n", + mmc_hostname(host->mmc)); + cmd->error = -EINVAL; + tasklet_schedule(&host->finish_tasklet); +@@ -783,13 +854,6 @@ static void bcm2835_sdhost_transfer_comp + pr_debug("transfer_complete(error %d, stop %d)\n", + data->error, data->stop ? 1 : 0); + +- if (data->error) +- /* +- * The controller needs a reset of internal state machines +- * upon error conditions. +- */ +- bcm2835_sdhost_reset(host); +- + /* + * Need to send CMD12 if - + * a) open-ended multiblock transfer (no CMD23) +@@ -845,7 +909,7 @@ static void bcm2835_sdhost_finish_comman + #endif + + if (timeout == 0) { +- pr_err("%s: Command never completed.\n", ++ pr_err("%s: command never completed.\n", + mmc_hostname(host->mmc)); + bcm2835_sdhost_dumpregs(host); + host->cmd->error = -EIO; +@@ -875,14 +939,23 @@ static void bcm2835_sdhost_finish_comman + { + u32 sdhsts = bcm2835_sdhost_read(host, SDHSTS); + +- pr_debug("%s: error detected - CMD %x, HSTS %03x, EDM %x\n", +- mmc_hostname(host->mmc), sdcmd, sdhsts, +- bcm2835_sdhost_read(host, SDEDM)); +- +- if (sdhsts & SDHSTS_CMD_TIME_OUT) ++ if (host->debug) ++ pr_info("%s: error detected - CMD %x, HSTS %03x, EDM %x\n", ++ mmc_hostname(host->mmc), sdcmd, sdhsts, ++ bcm2835_sdhost_read(host, SDEDM)); ++ ++ if (sdhsts & SDHSTS_CMD_TIME_OUT) { ++ switch (host->cmd->opcode) { ++ case 5: case 52: case 53: ++ /* Don't warn about SDIO commands */ ++ break; ++ default: ++ pr_err("%s: command timeout\n", ++ mmc_hostname(host->mmc)); ++ break; ++ } + host->cmd->error = -ETIMEDOUT; +- else +- { ++ } else { + pr_err("%s: unexpected command error\n", + mmc_hostname(host->mmc)); + bcm2835_sdhost_dumpregs(host); +@@ -897,11 +970,13 @@ static void bcm2835_sdhost_finish_comman + int i; + for (i = 0; i < 4; i++) + host->cmd->resp[3 - i] = bcm2835_sdhost_read(host, SDRSP0 + i*4); +- pr_debug("bcm2835_sdhost_finish_command: %08x %08x %08x %08x\n", ++ pr_debug("%s: finish_command %08x %08x %08x %08x\n", ++ mmc_hostname(host->mmc), + host->cmd->resp[0], host->cmd->resp[1], host->cmd->resp[2], host->cmd->resp[3]); + } else { + host->cmd->resp[0] = bcm2835_sdhost_read(host, SDRSP0); +- pr_debug("bcm2835_sdhost_finish_command: %08x\n", ++ pr_debug("%s: finish_command %08x\n", ++ mmc_hostname(host->mmc), + host->cmd->resp[0]); + } + } +@@ -932,7 +1007,7 @@ static void bcm2835_sdhost_finish_comman + } + } + +-static void bcm2835_sdhost_timeout_timer(unsigned long data) ++static void bcm2835_sdhost_timeout(unsigned long data) + { + struct bcm2835_host *host; + unsigned long flags; +@@ -942,7 +1017,7 @@ static void bcm2835_sdhost_timeout_timer + spin_lock_irqsave(&host->lock, flags); + + if (host->mrq) { +- pr_err("%s: Timeout waiting for hardware interrupt.\n", ++ pr_err("%s: timeout waiting for hardware interrupt.\n", + mmc_hostname(host->mmc)); + bcm2835_sdhost_dumpregs(host); + +@@ -964,6 +1039,41 @@ static void bcm2835_sdhost_timeout_timer + spin_unlock_irqrestore(&host->lock, flags); + } + ++static void bcm2835_sdhost_pio_timeout(unsigned long data) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = (struct bcm2835_host *)data; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ if (host->data) { ++ u32 hsts = bcm2835_sdhost_read(host, SDHSTS); ++ ++ if (hsts & SDHSTS_REW_TIME_OUT) { ++ pr_err("%s: transfer timeout\n", ++ mmc_hostname(host->mmc)); ++ if (host->debug) ++ bcm2835_sdhost_dumpregs(host); ++ } else { ++ pr_err("%s: unexpected transfer timeout\n", ++ mmc_hostname(host->mmc)); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ ++ bcm2835_sdhost_write(host, SDHSTS_TRANSFER_ERROR_MASK, ++ SDHSTS); ++ ++ host->data->error = -ETIMEDOUT; ++ ++ bcm2835_sdhost_finish_data(host); ++ } ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ + static void bcm2835_sdhost_enable_sdio_irq_nolock(struct bcm2835_host *host, int enable) + { + if (enable) +@@ -979,7 +1089,7 @@ static void bcm2835_sdhost_enable_sdio_i + struct bcm2835_host *host = mmc_priv(mmc); + unsigned long flags; + +- pr_debug("bcm2835_sdhost_enable_sdio_irq(%d)\n", enable); ++ pr_debug("%s: enable_sdio_irq(%d)\n", mmc_hostname(mmc), enable); + spin_lock_irqsave(&host->lock, flags); + bcm2835_sdhost_enable_sdio_irq_nolock(host, enable); + spin_unlock_irqrestore(&host->lock, flags); +@@ -987,11 +1097,12 @@ static void bcm2835_sdhost_enable_sdio_i + + static u32 bcm2835_sdhost_busy_irq(struct bcm2835_host *host, u32 intmask) + { +- const u32 handled = (SDHSTS_CMD_TIME_OUT | SDHSTS_CRC16_ERROR | +- SDHSTS_CRC7_ERROR | SDHSTS_FIFO_ERROR); ++ const u32 handled = (SDHSTS_REW_TIME_OUT | SDHSTS_CMD_TIME_OUT | ++ SDHSTS_CRC16_ERROR | SDHSTS_CRC7_ERROR | ++ SDHSTS_FIFO_ERROR); + + if (!host->cmd) { +- pr_err("%s: Got command busy interrupt 0x%08x even " ++ pr_err("%s: got command busy interrupt 0x%08x even " + "though no command operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + bcm2835_sdhost_dumpregs(host); +@@ -999,7 +1110,7 @@ static u32 bcm2835_sdhost_busy_irq(struc + } + + if (!host->use_busy) { +- pr_err("%s: Got command busy interrupt 0x%08x even " ++ pr_err("%s: got command busy interrupt 0x%08x even " + "though not expecting one.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + bcm2835_sdhost_dumpregs(host); +@@ -1007,14 +1118,28 @@ static u32 bcm2835_sdhost_busy_irq(struc + } + host->use_busy = 0; + +- if (intmask & SDHSTS_CMD_TIME_OUT) +- host->cmd->error = -ETIMEDOUT; +- else if (intmask & (SDHSTS_CRC16_ERROR | SDHSTS_CRC7_ERROR | +- SDHSTS_FIFO_ERROR)) +- host->cmd->error = -EILSEQ; ++ if (intmask & SDHSTS_ERROR_MASK) ++ { ++ pr_err("sdhost_busy_irq: intmask %x, data %p\n", intmask, host->mrq->data); ++ if (intmask & SDHSTS_CRC7_ERROR) ++ host->cmd->error = -EILSEQ; ++ else if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) { ++ if (host->mrq->data) ++ host->mrq->data->error = -EILSEQ; ++ else ++ host->cmd->error = -EILSEQ; ++ } else if (intmask & SDHSTS_REW_TIME_OUT) { ++ if (host->mrq->data) ++ host->mrq->data->error = -ETIMEDOUT; ++ else ++ host->cmd->error = -ETIMEDOUT; ++ } else if (intmask & SDHSTS_CMD_TIME_OUT) ++ host->cmd->error = -ETIMEDOUT; + +- if (host->cmd->error) ++ bcm2835_sdhost_dumpregs(host); + tasklet_schedule(&host->finish_tasklet); ++ } + else + bcm2835_sdhost_finish_command(host); + +@@ -1023,8 +1148,9 @@ static u32 bcm2835_sdhost_busy_irq(struc + + static u32 bcm2835_sdhost_data_irq(struct bcm2835_host *host, u32 intmask) + { +- const u32 handled = (SDHSTS_CMD_TIME_OUT | SDHSTS_CRC16_ERROR | +- SDHSTS_CRC7_ERROR | SDHSTS_FIFO_ERROR); ++ const u32 handled = (SDHSTS_REW_TIME_OUT | ++ SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR); + + /* There are no dedicated data/space available interrupt + status bits, so it is necessary to use the single shared +@@ -1034,13 +1160,19 @@ static u32 bcm2835_sdhost_data_irq(struc + if (!host->data) + return 0; + +- // XXX FIFO_ERROR +- if (intmask & SDHSTS_CMD_TIME_OUT) +- host->cmd->error = -ETIMEDOUT; +- else if ((intmask & (SDHSTS_CRC16_ERROR | SDHSTS_CRC7_ERROR)) && +- ((bcm2835_sdhost_read(host, SDCMD) & SDCMD_CMD_MASK) +- != MMC_BUS_TEST_R)) +- host->cmd->error = -EILSEQ; ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR | ++ SDHSTS_REW_TIME_OUT)) { ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) ++ host->data->error = -EILSEQ; ++ else ++ host->data->error = -ETIMEDOUT; ++ ++ bcm2835_sdhost_dumpregs(host); ++ tasklet_schedule(&host->finish_tasklet); ++ return handled; ++ } + + /* Use the block interrupt for writes after the first block */ + if (host->data->flags & MMC_DATA_WRITE) { +@@ -1067,31 +1199,48 @@ static u32 bcm2835_sdhost_block_irq(stru + { + struct dma_chan *dma_chan; + u32 dir_data; +- const u32 handled = (SDHSTS_CMD_TIME_OUT | SDHSTS_CRC16_ERROR | +- SDHSTS_CRC7_ERROR | SDHSTS_FIFO_ERROR); ++ const u32 handled = (SDHSTS_REW_TIME_OUT | ++ SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR); + + if (!host->data) { +- pr_err("%s: Got block interrupt 0x%08x even " ++ pr_err("%s: got block interrupt 0x%08x even " + "though no data operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + bcm2835_sdhost_dumpregs(host); + return handled; + } + +- if (intmask & SDHSTS_CMD_TIME_OUT) +- host->cmd->error = -ETIMEDOUT; +- else if ((intmask & (SDHSTS_CRC16_ERROR | SDHSTS_CRC7_ERROR)) && +- ((bcm2835_sdhost_read(host, SDCMD) & SDCMD_CMD_MASK) +- != MMC_BUS_TEST_R)) +- host->cmd->error = -EILSEQ; ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR | ++ SDHSTS_REW_TIME_OUT)) { ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) ++ host->data->error = -EILSEQ; ++ else ++ host->data->error = -ETIMEDOUT; ++ ++ if (host->debug) ++ bcm2835_sdhost_dumpregs(host); ++ tasklet_schedule(&host->finish_tasklet); ++ return handled; ++ } + + if (!host->use_dma) { + BUG_ON(!host->blocks); + host->blocks--; +- if ((host->blocks == 0) || host->data->error) ++ if ((host->blocks == 0) || host->data->error) { ++ /* Cancel the timer */ ++ del_timer(&host->pio_timer); ++ + bcm2835_sdhost_finish_data(host); +- else ++ } else { + bcm2835_sdhost_transfer_pio(host); ++ ++ /* Reset the timer */ ++ mod_timer(&host->pio_timer, ++ jiffies + host->pio_timeout); ++ } + } else if (host->data->flags & MMC_DATA_WRITE) { + dma_chan = host->dma_chan_tx; + dir_data = DMA_TO_DEVICE; +@@ -1125,7 +1274,7 @@ static irqreturn_t bcm2835_sdhost_irq(in + SDHSTS_BLOCK_IRPT | + SDHSTS_SDIO_IRPT | + SDHSTS_DATA_FLAG); +- if ((handled == SDHSTS_DATA_FLAG) && // XXX ++ if ((handled == SDHSTS_DATA_FLAG) && + (loops == 0) && !host->data) { + pr_err("%s: sdhost_irq data interrupt 0x%08x even " + "though no data operation was in progress.\n", +@@ -1177,10 +1326,11 @@ static irqreturn_t bcm2835_sdhost_irq(in + spin_unlock(&host->lock); + + if (early) +- pr_debug("%s: early %x (loops %d)\n", mmc_hostname(host->mmc), early, loops); ++ pr_debug("%s: early %x (loops %d)\n", ++ mmc_hostname(host->mmc), early, loops); + + if (unexpected) { +- pr_err("%s: Unexpected interrupt 0x%08x.\n", ++ pr_err("%s: unexpected interrupt 0x%08x.\n", + mmc_hostname(host->mmc), unexpected); + bcm2835_sdhost_dumpregs(host); + } +@@ -1227,8 +1377,22 @@ void bcm2835_sdhost_set_clock(struct bcm + int div = 0; /* Initialized for compiler warning */ + unsigned int input_clock = clock; + +- if (host->overclock_50 && (clock == 50000000)) +- clock = host->overclock_50 * 1000000 + 999999; ++ if (host->debug) ++ pr_info("%s: set_clock(%d)\n", mmc_hostname(host->mmc), clock); ++ ++ if ((clock == 0) && host->reduce_overclock) { ++ /* This is a reset following data corruption - reduce any ++ overclock */ ++ host->reduce_overclock = 0; ++ if (host->overclock_50 > 50) { ++ pr_warn("%s: reducing overclock due to errors\n", ++ mmc_hostname(host->mmc)); ++ host->overclock_50--; ++ } ++ } ++ ++ if (host->overclock_50 && (clock == 50*MHZ)) ++ clock = host->overclock_50 * MHZ + (MHZ - 1); + + /* The SDCDIV register has 11 bits, and holds (div - 2). + But in data mode the max is 50MHz wihout a minimum, and only the +@@ -1275,17 +1439,34 @@ void bcm2835_sdhost_set_clock(struct bcm + clock = host->max_clk / (div + 2); + host->mmc->actual_clock = clock; + +- if ((clock > input_clock) && (clock > host->max_overclock)) { +- pr_warn("%s: Overclocking to %dHz\n", +- mmc_hostname(host->mmc), clock); +- host->max_overclock = clock; ++ if (clock > input_clock) { ++ /* Save the closest value, to make it easier ++ to reduce in the event of error */ ++ host->overclock_50 = (clock/MHZ); ++ ++ if (clock != host->overclock) { ++ pr_warn("%s: overclocking to %dHz\n", ++ mmc_hostname(host->mmc), clock); ++ host->overclock = clock; ++ } ++ } ++ else if ((clock == 50 * MHZ) && host->overclock) ++ { ++ pr_warn("%s: cancelling overclock\n", ++ mmc_hostname(host->mmc)); ++ host->overclock = 0; + } + + host->cdiv = div; + bcm2835_sdhost_write(host, host->cdiv, SDCDIV); + +- pr_debug(DRIVER_NAME ": clock=%d -> max_clk=%d, cdiv=%x (actual clock %d)\n", +- input_clock, host->max_clk, host->cdiv, host->mmc->actual_clock); ++ /* Set the timeout to 500ms */ ++ bcm2835_sdhost_write(host, host->mmc->actual_clock/2, SDTOUT); ++ ++ if (host->debug) ++ pr_info("%s: clock=%d -> max_clk=%d, cdiv=%x (actual clock %d)\n", ++ mmc_hostname(host->mmc), input_clock, ++ host->max_clk, host->cdiv, host->mmc->actual_clock); + } + + static void bcm2835_sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq) +@@ -1293,29 +1474,32 @@ static void bcm2835_sdhost_request(struc + struct bcm2835_host *host; + unsigned long flags; + +- if (1) { ++ host = mmc_priv(mmc); ++ ++ if (host->debug) { + struct mmc_command *cmd = mrq->cmd; +- const char *src = "cmd"; + BUG_ON(!cmd); +- pr_debug("bcm2835_sdhost_request: %s %08x %08x (flags %x)\n", +- src, cmd->opcode, cmd->arg, cmd->flags); + if (cmd->data) +- pr_debug("bcm2835_sdhost_request: %s %d*%d\n", +- (cmd->data->flags & MMC_DATA_READ) ? +- "read" : "write", cmd->data->blocks, +- cmd->data->blksz); ++ pr_info("%s: cmd %d 0x%x (flags 0x%x) - %s %d*%d\n", ++ mmc_hostname(mmc), ++ cmd->opcode, cmd->arg, cmd->flags, ++ (cmd->data->flags & MMC_DATA_READ) ? ++ "read" : "write", cmd->data->blocks, ++ cmd->data->blksz); ++ else ++ pr_info("%s: cmd %d 0x%x (flags 0x%x)\n", ++ mmc_hostname(mmc), ++ cmd->opcode, cmd->arg, cmd->flags); + } + + if (mrq->data && !is_power_of_2(mrq->data->blksz)) { +- pr_err("%s: Unsupported block size (%d bytes)\n", ++ pr_err("%s: unsupported block size (%d bytes)\n", + mmc_hostname(mmc), mrq->data->blksz); + mrq->cmd->error = -EINVAL; + mmc_request_done(mmc, mrq); + return; + } + +- host = mmc_priv(mmc); +- + spin_lock_irqsave(&host->lock, flags); + + WARN_ON(host->mrq != NULL); +@@ -1345,9 +1529,12 @@ static void bcm2835_sdhost_set_ios(struc + struct bcm2835_host *host = mmc_priv(mmc); + unsigned long flags; + +- pr_debug("bcm2835_sdhost_set_ios: clock %d, pwr %d, bus_width %d, timing %d, vdd %d, drv_type %d\n", +- ios->clock, ios->power_mode, ios->bus_width, +- ios->timing, ios->signal_voltage, ios->drv_type); ++ if (host->debug) ++ pr_info("%s: ios clock %d, pwr %d, bus_width %d, " ++ "timing %d, vdd %d, drv_type %d\n", ++ mmc_hostname(mmc), ++ ios->clock, ios->power_mode, ios->bus_width, ++ ios->timing, ios->signal_voltage, ios->drv_type); + + spin_lock_irqsave(&host->lock, flags); + +@@ -1396,6 +1583,7 @@ static struct mmc_host_ops bcm2835_sdhos + .request = bcm2835_sdhost_request, + .set_ios = bcm2835_sdhost_set_ios, + .enable_sdio_irq = bcm2835_sdhost_enable_sdio_irq, ++ .hw_reset = bcm2835_sdhost_reset, + .multi_io_quirk = bcm2835_sdhost_multi_io_quirk, + }; + +@@ -1423,15 +1611,24 @@ static void bcm2835_sdhost_tasklet_finis + + mrq = host->mrq; + +- /* +- * The controller needs a reset of internal state machines +- * upon error conditions. +- */ +- if (((mrq->cmd && mrq->cmd->error) || +- (mrq->data && (mrq->data->error || +- (mrq->data->stop && mrq->data->stop->error))))) { ++ /* Drop the overclock after any data corruption, or after any ++ error overclocked */ ++ if (mrq->data && (mrq->data->error == -EILSEQ)) ++ host->reduce_overclock = 1; ++ else if (host->overclock) { ++ /* Convert timeout errors while overclocked to data errors, ++ because the system recovers better. */ ++ if (mrq->cmd && mrq->cmd->error) { ++ host->reduce_overclock = 1; ++ if (mrq->cmd->error == -ETIMEDOUT) ++ mrq->cmd->error = -EILSEQ; ++ } + +- bcm2835_sdhost_reset(host); ++ if (mrq->data && mrq->data->error) { ++ host->reduce_overclock = 1; ++ if (mrq->data->error == -ETIMEDOUT) ++ mrq->data->error = -EILSEQ; ++ } + } + + host->mrq = NULL; +@@ -1450,35 +1647,37 @@ int bcm2835_sdhost_add_host(struct bcm28 + { + struct mmc_host *mmc; + struct dma_slave_config cfg; ++ char pio_limit_string[20]; + int ret; + + mmc = host->mmc; + +- bcm2835_sdhost_reset(host); ++ bcm2835_sdhost_reset_internal(host); + + mmc->f_max = host->max_clk; + mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV; + +- /* SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK */ +- host->timeout_clk = mmc->f_max / 1000; +-#ifdef CONFIG_ARCH_BCM2835 +- mmc->max_busy_timeout = (1 << 27) / host->timeout_clk; +-#endif ++ mmc->max_busy_timeout = (~(unsigned int)0)/(mmc->f_max/1000); ++ ++ pr_debug("f_max %d, f_min %d, max_busy_timeout %d\n", ++ mmc->f_max, mmc->f_min, mmc->max_busy_timeout); ++ + /* host controller capabilities */ + mmc->caps |= /* MMC_CAP_SDIO_IRQ |*/ MMC_CAP_4_BIT_DATA | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | +- MMC_CAP_NEEDS_POLL | ++ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | + (ALLOW_CMD23 * MMC_CAP_CMD23); + + spin_lock_init(&host->lock); + + if (host->allow_dma) { +- if (!host->dma_chan_tx || !host->dma_chan_rx || +- IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) { +- pr_err("%s: Unable to initialise DMA channels. Falling back to PIO\n", DRIVER_NAME); ++ if (IS_ERR_OR_NULL(host->dma_chan_tx) || ++ IS_ERR_OR_NULL(host->dma_chan_rx)) { ++ pr_err("%s: unable to initialise DMA channels. " ++ "Falling back to PIO\n", ++ mmc_hostname(mmc)); + host->have_dma = false; + } else { +- pr_info("DMA channels allocated for the SDHost driver"); + host->have_dma = true; + + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; +@@ -1496,7 +1695,6 @@ int bcm2835_sdhost_add_host(struct bcm28 + ret = dmaengine_slave_config(host->dma_chan_rx, &cfg); + } + } else { +- pr_info("Forcing PIO mode\n"); + host->have_dma = false; + } + +@@ -1512,18 +1710,23 @@ int bcm2835_sdhost_add_host(struct bcm28 + tasklet_init(&host->finish_tasklet, + bcm2835_sdhost_tasklet_finish, (unsigned long)host); + +- setup_timer(&host->timer, bcm2835_sdhost_timeout_timer, (unsigned long)host); ++ setup_timer(&host->timer, bcm2835_sdhost_timeout, ++ (unsigned long)host); ++ ++ setup_timer(&host->pio_timer, bcm2835_sdhost_pio_timeout, ++ (unsigned long)host); + + bcm2835_sdhost_init(host, 0); + #ifndef CONFIG_ARCH_BCM2835 + ret = request_irq(host->irq, bcm2835_sdhost_irq, 0 /*IRQF_SHARED*/, + mmc_hostname(mmc), host); + #else +- ret = request_threaded_irq(host->irq, bcm2835_sdhost_irq, bcm2835_sdhost_thread_irq, ++ ret = request_threaded_irq(host->irq, bcm2835_sdhost_irq, ++ bcm2835_sdhost_thread_irq, + IRQF_SHARED, mmc_hostname(mmc), host); + #endif + if (ret) { +- pr_err("%s: Failed to request IRQ %d: %d\n", ++ pr_err("%s: failed to request IRQ %d: %d\n", + mmc_hostname(mmc), host->irq, ret); + goto untasklet; + } +@@ -1531,10 +1734,13 @@ int bcm2835_sdhost_add_host(struct bcm28 + mmiowb(); + mmc_add_host(mmc); + +- pr_info("Load BCM2835 SDHost driver\n"); +- if (host->delay_after_stop) +- pr_info("BCM2835 SDHost: delay_after_stop=%dus\n", +- host->delay_after_stop); ++ pio_limit_string[0] = '\0'; ++ if (host->have_dma && (host->pio_limit > 0)) ++ sprintf(pio_limit_string, " (>%d)", host->pio_limit); ++ pr_info("%s: %s loaded - DMA %s%s\n", ++ mmc_hostname(mmc), DRIVER_NAME, ++ host->have_dma ? "enabled" : "disabled", ++ pio_limit_string); + + return 0; + +@@ -1562,7 +1768,7 @@ static int bcm2835_sdhost_probe(struct p + mmc->ops = &bcm2835_sdhost_ops; + host = mmc_priv(mmc); + host->mmc = mmc; +- host->timeout = msecs_to_jiffies(1000); ++ host->pio_timeout = msecs_to_jiffies(500); + spin_lock_init(&host->lock); + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); +@@ -1588,8 +1794,12 @@ static int bcm2835_sdhost_probe(struct p + of_property_read_u32(node, + "brcm,overclock-50", + &host->overclock_50); ++ of_property_read_u32(node, ++ "brcm,pio-limit", ++ &host->pio_limit); + host->allow_dma = ALLOW_DMA && + !of_property_read_bool(node, "brcm,force-pio"); ++ host->debug = of_property_read_bool(node, "brcm,debug"); + } + + if (host->allow_dma) { |