diff options
author | Claudio Mignanti <c.mignanti@gmail.com> | 2012-04-22 09:09:50 +0000 |
---|---|---|
committer | Claudio Mignanti <c.mignanti@gmail.com> | 2012-04-22 09:09:50 +0000 |
commit | 72e3f7861aff16807df981c748b64bb3d05aa339 (patch) | |
tree | 374aa23303a86bad10ee4c4ddb928725a5f10258 /target/linux/at91/files/arch | |
parent | 2e76284293f5d1e725f7ddb0a1cfafe12cb354a0 (diff) | |
download | master-187ad058-72e3f7861aff16807df981c748b64bb3d05aa339.tar.gz master-187ad058-72e3f7861aff16807df981c748b64bb3d05aa339.tar.bz2 master-187ad058-72e3f7861aff16807df981c748b64bb3d05aa339.zip |
[at91] Remove old netus board definition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31435 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/at91/files/arch')
-rw-r--r-- | target/linux/at91/files/arch/arm/mach-at91/board-netus-foxboard.c | 242 |
1 files changed, 0 insertions, 242 deletions
diff --git a/target/linux/at91/files/arch/arm/mach-at91/board-netus-foxboard.c b/target/linux/at91/files/arch/arm/mach-at91/board-netus-foxboard.c deleted file mode 100644 index c0d366ffc1..0000000000 --- a/target/linux/at91/files/arch/arm/mach-at91/board-netus-foxboard.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2009-2010 Claudio Mignanti <c.mignanti@gmail.com> - * - * Strongly based on arch/arm/mach-at91/board-sam9260ek.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/clk.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/board.h> -#include <mach/at91sam9_smc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init ek_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - -#if defined(CONFIG_NETUS_SERIALS) || defined(CONFIG_NETUS_FOXGM) - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); -#endif - -#if defined(CONFIG_NETUS_SERIALS) - /* USART2 on ttyS3. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, 0); -#endif - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC6, - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if defined(CONFIG_NETUS_USE_DATAFLASH) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA29, - .is_rmii = 1, -}; - - -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, - .wire4 = 1, -}; - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { -#if defined(CONFIG_NETUS_FOXGM) - { - .name = "led:red:L4", - .gpio = AT91_PIN_PC9, - .active_low = 0, - .default_trigger = "heartbeat", - }, - { - .name = "led:red:L5", - .gpio = AT91_PIN_PC13, - .active_low = 0, - .default_trigger = "none", - }, -#endif //CONFIG_NETUS_FOXGM - { - .name = "led:red:user", - .gpio = AT91_PIN_PC7, - .active_low = 0, -#if defined(CONFIG_NETUS_HEARTBEAT_LED) - .default_trigger = "heartbeat", -#else - .default_trigger = "none", -#endif //CONFIG_NETUS_HEARTBEAT_LED - }, -}; - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) - -static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PC4, - .code = BTN_1, - .desc = "Button 1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PC4, 1); /* btn1 */ - at91_set_deglitch(AT91_PIN_PC4, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -static struct resource gpiodev_resource = { - .start = 0xFFFFFFFF, -}; - -static void __init ek_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* Push Buttons */ - ek_add_device_buttons(); - /* Register GPIODEV */ - platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); - -} - -MACHINE_START(AT91SAM9G20EK, "Acmesystems Netus FoxBoardG20") - /* Maintainer: Claudio Mignanti */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91sam926x_timer, - .map_io = ek_map_io, - .init_irq = ek_init_irq, - .init_machine = ek_board_init, -MACHINE_END - - |