busybox: update to 1.22.1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40852 3c298f89-4303-0410-b956-a3cf2f4a3e73

23 files changed, 772 insertions, 556 deletions

diff --git a/package/utils/busybox/config/Config.in b/package/utils/busybox/config/Config.in
index 25892ffd83..71ba45b9b6 100644
--- a/package/utils/busybox/config/Config.in
+++ b/package/utils/busybox/config/Config.in
@@ -82,20 +82,21 @@ config BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_IN_BSS
 endchoice
 
 config BUSYBOX_CONFIG_SHOW_USAGE
-	bool "Show terse applet usage messages"
+	bool "Show applet usage messages"
 	default BUSYBOX_DEFAULT_SHOW_USAGE
 	help
-	  All BusyBox applets will show help messages when invoked with
-	  wrong arguments. You can turn off printing these terse usage
-	  messages if you say no here.
-	  This will save you up to 7k.
+	  Enabling this option, BusyBox applets will show terse help messages
+	  when invoked with wrong arguments.
+	  If you do not want to show any (helpful) usage message when
+	  issuing wrong command syntax, you can say 'N' here,
+	  saving approximately 7k.
 
 config BUSYBOX_CONFIG_FEATURE_VERBOSE_USAGE
 	bool "Show verbose applet usage messages"
 	default BUSYBOX_DEFAULT_FEATURE_VERBOSE_USAGE
 	depends on BUSYBOX_CONFIG_SHOW_USAGE
 	help
-	  All BusyBox applets will show more verbose help messages when
+	  All BusyBox applets will show verbose help messages when
 	  busybox is invoked with --help. This will add a lot of text to the
 	  busybox binary. In the default configuration, this will add about
 	  13k, but it can add much more depending on your configuration.
@@ -105,8 +106,8 @@ config BUSYBOX_CONFIG_FEATURE_COMPRESS_USAGE
 	default BUSYBOX_DEFAULT_FEATURE_COMPRESS_USAGE
 	depends on BUSYBOX_CONFIG_SHOW_USAGE
 	help
-	  Store usage messages in compressed form, uncompress them on-the-fly
-	  when <applet> --help is called.
+	  Store usage messages in .bz compressed form, uncompress them
+	  on-the-fly when <applet> --help is called.
 
 	  If you have a really tiny busybox with few applets enabled (and
 	  bunzip2 isn't one of them), the overhead of the decompressor might
@@ -159,12 +160,13 @@ config BUSYBOX_CONFIG_UNICODE_USING_LOCALE
 	  Internal implementation is smaller.
 
 config BUSYBOX_CONFIG_FEATURE_CHECK_UNICODE_IN_ENV
-	bool "Check $LANG environment variable"
+	bool "Check $LC_ALL, $LC_CTYPE and $LANG environment variables"
 	default BUSYBOX_DEFAULT_FEATURE_CHECK_UNICODE_IN_ENV
 	depends on BUSYBOX_CONFIG_UNICODE_SUPPORT && !BUSYBOX_CONFIG_UNICODE_USING_LOCALE
 	help
 	  With this option on, Unicode support is activated
-	  only if LANG variable has the value of the form "xxxx.utf8"
+	  only if locale-related variables have the value of the form
+	  "xxxx.utf8"
 
 	  Otherwise, Unicode support will be always enabled and active.
 
@@ -308,7 +310,18 @@ config BUSYBOX_CONFIG_FEATURE_PIDFILE
 	default BUSYBOX_DEFAULT_FEATURE_PIDFILE
 	help
 	  This option makes some applets (e.g. crond, syslogd, inetd) write
-	  a pidfile in /var/run. Some applications rely on them.
+	  a pidfile at the configured PID_FILE_PATH.  It has no effect
+	  on applets which require pidfiles to run.
+
+config BUSYBOX_CONFIG_PID_FILE_PATH
+	string "Path to directory for pidfile"
+	default BUSYBOX_DEFAULT_PID_FILE_PATH
+	depends on BUSYBOX_CONFIG_FEATURE_PIDFILE
+	help
+	  This is the default path where pidfiles are created.  Applets which
+	  allow you to set the pidfile path on the command line will override
+	  this value.  The option has no effect on applets that require you to
+	  specify a pidfile path.
 
 config BUSYBOX_CONFIG_FEATURE_SUID
 	bool "Support for SUID/SGID handling"
@@ -319,7 +332,7 @@ config BUSYBOX_CONFIG_FEATURE_SUID
 	  root-level operations even when run by ordinary users
 	  (for example, mounting of user mounts in fstab needs this).
 
-	  Busybox will automatically drop priviledges for applets
+	  Busybox will automatically drop privileges for applets
 	  that don't need root access.
 
 	  If you are really paranoid and don't want to do this, build two
@@ -598,12 +611,39 @@ config BUSYBOX_CONFIG_CROSS_COMPILER_PREFIX
 
 	  Native builds leave this empty.
 
+config BUSYBOX_CONFIG_SYSROOT
+	string "Path to sysroot"
+	default BUSYBOX_DEFAULT_SYSROOT
+	help
+	  If you want to build BusyBox with a cross compiler, then you
+	  might also need to specify where /usr/include and /usr/lib
+	  will be found.
+
+	  For example, BusyBox can be built against an installed
+	  Android NDK, platform version 9, for ARM ABI with
+
+	  CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
+
+	  Native builds leave this empty.
+
 config BUSYBOX_CONFIG_EXTRA_CFLAGS
 	string "Additional CFLAGS"
 	default BUSYBOX_DEFAULT_EXTRA_CFLAGS
 	help
 	  Additional CFLAGS to pass to the compiler verbatim.
 
+config BUSYBOX_CONFIG_EXTRA_LDFLAGS
+	string "Additional LDFLAGS"
+	default BUSYBOX_DEFAULT_EXTRA_LDFLAGS
+	help
+	  Additional LDFLAGS to pass to the linker verbatim.
+
+config BUSYBOX_CONFIG_EXTRA_LDLIBS
+	string "Additional LDLIBS"
+	default BUSYBOX_DEFAULT_EXTRA_LDLIBS
+	help
+	  Additional LDLIBS to pass to the linker with -l.
+
 endmenu
 
 menu 'Debugging Options'
diff --git a/package/utils/busybox/config/archival/Config.in b/package/utils/busybox/config/archival/Config.in
index b178d0cb3e..e977bb49d8 100644
--- a/package/utils/busybox/config/archival/Config.in
+++ b/package/utils/busybox/config/archival/Config.in
@@ -6,8 +6,6 @@
 
 menu "Archival Utilities"
 
-
-
 config BUSYBOX_CONFIG_FEATURE_SEAMLESS_XZ
 	bool "Make tar, rpm, modprobe etc understand .xz data"
 	default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_XZ
@@ -33,10 +31,10 @@ config BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ
 	  Make tar, rpm, modprobe etc understand .gz data.
 
 config BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z
-	bool "Make tar and gunzip understand .Z data"
+	bool "tar, rpm, modprobe etc understand .Z data"
 	default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_Z
 	help
-	  Make tar and gunzip understand .Z data.
+	  Make tar, rpm, modprobe etc understand .Z data.
 
 config BUSYBOX_CONFIG_AR
 	bool "ar"
@@ -77,7 +75,19 @@ config BUSYBOX_CONFIG_FEATURE_AR_CREATE
 	depends on BUSYBOX_CONFIG_AR
 	help
 	  This enables archive creation (-c and -r) with busybox ar.
-
+config BUSYBOX_CONFIG_UNCOMPRESS
+	bool "uncompress"
+	default BUSYBOX_DEFAULT_UNCOMPRESS
+	help
+	  uncompress is used to decompress archives created by compress.
+	  Not much used anymore, replaced by gzip/gunzip.
+config BUSYBOX_CONFIG_GUNZIP
+	bool "gunzip"
+	default BUSYBOX_DEFAULT_GUNZIP
+	help
+	  gunzip is used to decompress archives created by gzip.
+	  You can use the `-t' option to test the integrity of
+	  an archive, without decompressing it.
 config BUSYBOX_CONFIG_BUNZIP2
 	bool "bunzip2"
 	default BUSYBOX_DEFAULT_BUNZIP2
@@ -90,7 +100,46 @@ config BUSYBOX_CONFIG_BUNZIP2
 
 	  Unless you have a specific application which requires bunzip2, you
 	  should probably say N here.
+config BUSYBOX_CONFIG_UNLZMA
+	bool "unlzma"
+	default BUSYBOX_DEFAULT_UNLZMA
+	help
+	  unlzma is a compression utility using the Lempel-Ziv-Markov chain
+	  compression algorithm, and range coding. Compression
+	  is generally considerably better than that achieved by the bzip2
+	  compressors.
+
+	  The BusyBox unlzma applet is limited to decompression only.
+	  On an x86 system, this applet adds about 4K.
 
+config BUSYBOX_CONFIG_FEATURE_LZMA_FAST
+	bool "Optimize unlzma for speed"
+	default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST
+	depends on BUSYBOX_CONFIG_UNLZMA
+	help
+	  This option reduces decompression time by about 25% at the cost of
+	  a 1K bigger binary.
+
+config BUSYBOX_CONFIG_LZMA
+	bool "Provide lzma alias which supports only unpacking"
+	default BUSYBOX_DEFAULT_LZMA
+	depends on BUSYBOX_CONFIG_UNLZMA
+	help
+	  Enable this option if you want commands like "lzma -d" to work.
+	  IOW: you'll get lzma applet, but it will always require -d option.
+config BUSYBOX_CONFIG_UNXZ
+	bool "unxz"
+	default BUSYBOX_DEFAULT_UNXZ
+	help
+	  unxz is a unlzma successor.
+
+config BUSYBOX_CONFIG_XZ
+	bool "Provide xz alias which supports only unpacking"
+	default BUSYBOX_DEFAULT_XZ
+	depends on BUSYBOX_CONFIG_UNXZ
+	help
+	  Enable this option if you want commands like "xz -d" to work.
+	  IOW: you'll get xz applet, but it will always require -d option.
 config BUSYBOX_CONFIG_BZIP2
 	bool "bzip2"
 	default BUSYBOX_DEFAULT_BZIP2
@@ -103,7 +152,6 @@ config BUSYBOX_CONFIG_BZIP2
 
 	  Unless you have a specific application which requires bzip2, you
 	  should probably say N here.
-
 config BUSYBOX_CONFIG_CPIO
 	bool "cpio"
 	default BUSYBOX_DEFAULT_CPIO
@@ -132,7 +180,6 @@ config BUSYBOX_CONFIG_FEATURE_CPIO_P
 	depends on BUSYBOX_CONFIG_FEATURE_CPIO_O
 	help
 	  Passthrough mode. Rarely used.
-
 config BUSYBOX_CONFIG_DPKG
 	bool "dpkg"
 	default BUSYBOX_DEFAULT_DPKG
@@ -143,7 +190,6 @@ config BUSYBOX_CONFIG_DPKG
 
 	  This implementation of dpkg has a number of limitations,
 	  you should use the official dpkg if possible.
-
 config BUSYBOX_CONFIG_DPKG_DEB
 	bool "dpkg_deb"
 	default BUSYBOX_DEFAULT_DPKG_DEB
@@ -165,15 +211,6 @@ config BUSYBOX_CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY
 	  "ar -p <deb> data.tar.gz | tar -zx". However it saves space as none
 	  of the extra dpkg-deb, ar or tar options are needed, they are linked
 	  to internally.
-
-config BUSYBOX_CONFIG_GUNZIP
-	bool "gunzip"
-	default BUSYBOX_DEFAULT_GUNZIP
-	help
-	  gunzip is used to decompress archives created by gzip.
-	  You can use the `-t' option to test the integrity of
-	  an archive, without decompressing it.
-
 config BUSYBOX_CONFIG_GZIP
 	bool "gzip"
 	default BUSYBOX_DEFAULT_GZIP
@@ -188,6 +225,17 @@ config BUSYBOX_CONFIG_FEATURE_GZIP_LONG_OPTIONS
 	help
 	  Enable use of long options, increases size by about 106 Bytes
 
+config BUSYBOX_CONFIG_GZIP_FAST
+	int "Trade memory for gzip speed (0:small,slow - 2:fast,big)"
+	default BUSYBOX_DEFAULT_GZIP_FAST
+	range 0 2
+	depends on BUSYBOX_CONFIG_GZIP
+	help
+	  Enable big memory options for gzip.
+	  0: small buffers, small hash-tables
+	  1: larger buffers, larger hash-tables
+	  2: larger buffers, largest hash-tables
+	  Larger models may give slightly better compression
 config BUSYBOX_CONFIG_LZOP
 	bool "lzop"
 	default BUSYBOX_DEFAULT_LZOP
@@ -202,19 +250,16 @@ config BUSYBOX_CONFIG_LZOP_COMPR_HIGH
 	  High levels (7,8,9) of lzop compression. These levels
 	  are actually slower than gzip at equivalent compression ratios
 	  and take up 3.2K of code.
-
-config BUSYBOX_CONFIG_RPM2CPIO
-	bool "rpm2cpio"
-	default BUSYBOX_DEFAULT_RPM2CPIO
-	help
-	  Converts a RPM file into a CPIO archive.
-
 config BUSYBOX_CONFIG_RPM
 	bool "rpm"
 	default BUSYBOX_DEFAULT_RPM
 	help
 	  Mini RPM applet - queries and extracts RPM packages.
-
+config BUSYBOX_CONFIG_RPM2CPIO
+	bool "rpm2cpio"
+	default BUSYBOX_DEFAULT_RPM2CPIO
+	help
+	  Converts a RPM file into a CPIO archive.
 config BUSYBOX_CONFIG_TAR
 	bool "tar"
 	default BUSYBOX_DEFAULT_TAR
@@ -314,59 +359,6 @@ config BUSYBOX_CONFIG_FEATURE_TAR_SELINUX
 	help
 	  With this option busybox supports restoring SELinux labels
 	  when extracting files from tar archives.
-
-config BUSYBOX_CONFIG_UNCOMPRESS
-	bool "uncompress"
-	default BUSYBOX_DEFAULT_UNCOMPRESS
-	help
-	  uncompress is used to decompress archives created by compress.
-	  Not much used anymore, replaced by gzip/gunzip.
-
-config BUSYBOX_CONFIG_UNLZMA
-	bool "unlzma"
-	default BUSYBOX_DEFAULT_UNLZMA
-	help
-	  unlzma is a compression utility using the Lempel-Ziv-Markov chain
-	  compression algorithm, and range coding. Compression
-	  is generally considerably better than that achieved by the bzip2
-	  compressors.
-
-	  The BusyBox unlzma applet is limited to de-compression only.
-	  On an x86 system, this applet adds about 4K.
-
-	  Unless you have a specific application which requires unlzma, you
-	  should probably say N here.
-
-config BUSYBOX_CONFIG_FEATURE_LZMA_FAST
-	bool "Optimize unlzma for speed"
-	default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST
-	depends on BUSYBOX_CONFIG_UNLZMA
-	help
-	  This option reduces decompression time by about 25% at the cost of
-	  a 1K bigger binary.
-
-config BUSYBOX_CONFIG_LZMA
-	bool "Provide lzma alias which supports only unpacking"
-	default BUSYBOX_DEFAULT_LZMA
-	depends on BUSYBOX_CONFIG_UNLZMA
-	help
-	  Enable this option if you want commands like "lzma -d" to work.
-	  IOW: you'll get lzma applet, but it will always require -d option.
-
-config BUSYBOX_CONFIG_UNXZ
-	bool "unxz"
-	default BUSYBOX_DEFAULT_UNXZ
-	help
-	  unxz is a unlzma successor.
-
-config BUSYBOX_CONFIG_XZ
-	bool "Provide xz alias which supports only unpacking"
-	default BUSYBOX_DEFAULT_XZ
-	depends on BUSYBOX_CONFIG_UNXZ
-	help
-	  Enable this option if you want commands like "xz -d" to work.
-	  IOW: you'll get xz applet, but it will always require -d option.
-
 config BUSYBOX_CONFIG_UNZIP
 	bool "unzip"
 	default BUSYBOX_DEFAULT_UNZIP
diff --git a/package/utils/busybox/config/console-tools/Config.in b/package/utils/busybox/config/console-tools/Config.in
index 43ff71c0ac..53937d2b5c 100644
--- a/package/utils/busybox/config/console-tools/Config.in
+++ b/package/utils/busybox/config/console-tools/Config.in
@@ -7,7 +7,6 @@
 menu "Console Utilities"
 
 
-
 config BUSYBOX_CONFIG_CHVT
 	bool "chvt"
 	default BUSYBOX_DEFAULT_CHVT
diff --git a/package/utils/busybox/config/coreutils/Config.in b/package/utils/busybox/config/coreutils/Config.in
index e98c0caccf..c00eca9534 100644
--- a/package/utils/busybox/config/coreutils/Config.in
+++ b/package/utils/busybox/config/coreutils/Config.in
@@ -58,6 +58,12 @@ config BUSYBOX_CONFIG_FEATURE_DATE_COMPAT
 	  With this option off, 'date DATE' is 'date -s DATE' support
 	  the same format. With it on, 'date DATE' additionally supports
 	  MMDDhhmm[[YY]YY][.ss] format.
+config BUSYBOX_CONFIG_HOSTID
+	bool "hostid"
+	default BUSYBOX_DEFAULT_HOSTID
+	help
+	  hostid prints the numeric identifier (in hexadecimal) for
+	  the current host.
 config BUSYBOX_CONFIG_ID
 	bool "id"
 	default BUSYBOX_DEFAULT_ID
@@ -88,6 +94,21 @@ config BUSYBOX_CONFIG_TOUCH
 	help
 	  touch is used to create or change the access and/or
 	  modification timestamp of specified files.
+
+config BUSYBOX_CONFIG_FEATURE_TOUCH_NODEREF
+	bool "Add support for -h"
+	default BUSYBOX_DEFAULT_FEATURE_TOUCH_NODEREF
+	depends on BUSYBOX_CONFIG_TOUCH
+	help
+	  Enable touch to have the -h option.
+	  This requires libc support for lutimes() function.
+
+config BUSYBOX_CONFIG_FEATURE_TOUCH_SUSV3
+	bool "Add support for SUSV3 features (-d -t -r)"
+	default BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3
+	depends on BUSYBOX_CONFIG_TOUCH
+	help
+	  Enable touch to use a reference file or a given date/time argument.
 config BUSYBOX_CONFIG_TR
 	bool "tr"
 	default BUSYBOX_DEFAULT_TR
@@ -393,13 +414,6 @@ config BUSYBOX_CONFIG_FEATURE_FANCY_HEAD
 	help
 	  This enables the head options (-c, -q, and -v).
 
-config BUSYBOX_CONFIG_HOSTID
-	bool "hostid"
-	default BUSYBOX_DEFAULT_HOSTID
-	help
-	  hostid prints the numeric identifier (in hexadecimal) for
-	  the current host.
-
 config BUSYBOX_CONFIG_INSTALL
 	bool "install"
 	default BUSYBOX_DEFAULT_INSTALL
@@ -645,6 +659,12 @@ config BUSYBOX_CONFIG_SHA512SUM
 	help
 	  Compute and check SHA512 message digest
 
+config BUSYBOX_CONFIG_SHA3SUM
+	bool "sha3sum"
+	default BUSYBOX_DEFAULT_SHA3SUM
+	help
+	  Compute and check SHA3 (512-bit) message digest
+
 config BUSYBOX_CONFIG_SLEEP
 	bool "sleep"
 	default BUSYBOX_DEFAULT_SLEEP
@@ -897,13 +917,13 @@ config BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE
 	help
 	  Allow df, du, and ls to have human readable output.
 
-comment "Common options for md5sum, sha1sum, sha256sum, sha512sum"
-	depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM
+comment "Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum"
+	depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM || BUSYBOX_CONFIG_SHA3SUM
 
 config BUSYBOX_CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
 	bool "Enable -c, -s and -w options"
 	default BUSYBOX_DEFAULT_FEATURE_MD5_SHA1_SUM_CHECK
-	depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM
+	depends on BUSYBOX_CONFIG_MD5SUM || BUSYBOX_CONFIG_SHA1SUM || BUSYBOX_CONFIG_SHA256SUM || BUSYBOX_CONFIG_SHA512SUM || BUSYBOX_CONFIG_SHA3SUM
 	help
 	  Enabling the -c options allows files to be checked
 	  against pre-calculated hash values.
diff --git a/package/utils/busybox/config/debianutils/Config.in b/package/utils/busybox/config/debianutils/Config.in
index da18af16cb..533ad475c1 100644
--- a/package/utils/busybox/config/debianutils/Config.in
+++ b/package/utils/busybox/config/debianutils/Config.in
@@ -7,7 +7,6 @@
 menu "Debian Utilities"
 
 
-
 config BUSYBOX_CONFIG_MKTEMP
 	bool "mktemp"
 	default BUSYBOX_DEFAULT_MKTEMP
diff --git a/package/utils/busybox/config/e2fsprogs/Config.in b/package/utils/busybox/config/e2fsprogs/Config.in
index e200bfc66c..f826240181 100644
--- a/package/utils/busybox/config/e2fsprogs/Config.in
+++ b/package/utils/busybox/config/e2fsprogs/Config.in
@@ -7,7 +7,6 @@
 menu "Linux Ext2 FS Progs"
 
 
-
 config BUSYBOX_CONFIG_CHATTR
 	bool "chattr"
 	default BUSYBOX_DEFAULT_CHATTR
diff --git a/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in b/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in
index a0ba296356..d7a5396deb 100644
--- a/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in
+++ b/package/utils/busybox/config/e2fsprogs/old_e2fsprogs/Config.in
@@ -7,7 +7,6 @@
 menu "Linux Ext2 FS Progs"
 
 
-
 config BUSYBOX_CONFIG_CHATTR
 	bool "chattr"
 	default BUSYBOX_DEFAULT_CHATTR
diff --git a/package/utils/busybox/config/editors/Config.in b/package/utils/busybox/config/editors/Config.in
index 395615625e..90f9f0086e 100644
--- a/package/utils/busybox/config/editors/Config.in
+++ b/package/utils/busybox/config/editors/Config.in
@@ -6,11 +6,77 @@
 
 menu "Editors"
 
+config BUSYBOX_CONFIG_AWK
+	bool "awk"
+	default BUSYBOX_DEFAULT_AWK
+	help
+	  Awk is used as a pattern scanning and processing language. This is
+	  the BusyBox implementation of that programming language.
+
+config BUSYBOX_CONFIG_FEATURE_AWK_LIBM
+	bool "Enable math functions (requires libm)"
+	default BUSYBOX_DEFAULT_FEATURE_AWK_LIBM
+	depends on BUSYBOX_CONFIG_AWK
+	help
+	  Enable math functions of the Awk programming language.
+	  NOTE: This will require libm to be present for linking.
+
+config BUSYBOX_CONFIG_FEATURE_AWK_GNU_EXTENSIONS
+	bool "Enable a few GNU extensions"
+	default BUSYBOX_DEFAULT_FEATURE_AWK_GNU_EXTENSIONS
+	depends on BUSYBOX_CONFIG_AWK
+	help
+	  Enable a few features from gawk:
+	  * command line option -e AWK_PROGRAM
+	  * simultaneous use of -f and -e on the command line.
+	    This enables the use of awk library files.
+	    Ex: awk -f mylib.awk -e '{print myfunction($1);}' ...
+config BUSYBOX_CONFIG_CMP
+	bool "cmp"
+	default BUSYBOX_DEFAULT_CMP
+	help
+	  cmp is used to compare two files and returns the result
+	  to standard output.
+config BUSYBOX_CONFIG_DIFF
+	bool "diff"
+	default BUSYBOX_DEFAULT_DIFF
+	help
+	  diff compares two files or directories and outputs the
+	  differences between them in a form that can be given to
+	  the patch command.
+
+config BUSYBOX_CONFIG_FEATURE_DIFF_LONG_OPTIONS
+	bool "Enable long options"
+	default BUSYBOX_DEFAULT_FEATURE_DIFF_LONG_OPTIONS
+	depends on BUSYBOX_CONFIG_DIFF && BUSYBOX_CONFIG_LONG_OPTS
+	help
+	  Enable use of long options.
+
+config BUSYBOX_CONFIG_FEATURE_DIFF_DIR
+	bool "Enable directory support"
+	default BUSYBOX_DEFAULT_FEATURE_DIFF_DIR
+	depends on BUSYBOX_CONFIG_DIFF
+	help
+	  This option enables support for directory and subdirectory
+	  comparison.
+config BUSYBOX_CONFIG_ED
+	bool "ed"
+	default BUSYBOX_DEFAULT_ED
+	help
+	  The original 1970's Unix text editor, from the days of teletypes.
+	  Small, simple, evil. Part of SUSv3. If you're not already using
+	  this, you don't need it.
 config BUSYBOX_CONFIG_PATCH
 	bool "patch"
 	default BUSYBOX_DEFAULT_PATCH
 	help
 	  Apply a unified diff formatted patch.
+config BUSYBOX_CONFIG_SED
+	bool "sed"
+	default BUSYBOX_DEFAULT_SED
+	help
+	  sed is used to perform text transformations on a file
+	  or input from a pipeline.
 config BUSYBOX_CONFIG_VI
 	bool "vi"
 	default BUSYBOX_DEFAULT_VI
@@ -127,74 +193,6 @@ config BUSYBOX_CONFIG_FEATURE_VI_ASK_TERMINAL
 
 	  This is not clean but helps a lot on serial lines and such.
 
-config BUSYBOX_CONFIG_FEATURE_VI_OPTIMIZE_CURSOR
-	bool "Optimize cursor movement"
-	default BUSYBOX_DEFAULT_FEATURE_VI_OPTIMIZE_CURSOR
-	depends on BUSYBOX_CONFIG_VI
-	help
-	  This will make the cursor movement faster, but requires more memory
-	  and it makes the applet a tiny bit larger.
-
-config BUSYBOX_CONFIG_AWK
-	bool "awk"
-	default BUSYBOX_DEFAULT_AWK
-	help
-	  Awk is used as a pattern scanning and processing language. This is
-	  the BusyBox implementation of that programming language.
-
-config BUSYBOX_CONFIG_FEATURE_AWK_LIBM
-	bool "Enable math functions (requires libm)"
-	default BUSYBOX_DEFAULT_FEATURE_AWK_LIBM
-	depends on BUSYBOX_CONFIG_AWK
-	help
-	  Enable math functions of the Awk programming language.
-	  NOTE: This will require libm to be present for linking.
-
-config BUSYBOX_CONFIG_CMP
-	bool "cmp"
-	default BUSYBOX_DEFAULT_CMP
-	help
-	  cmp is used to compare two files and returns the result
-	  to standard output.
-
-config BUSYBOX_CONFIG_DIFF
-	bool "diff"
-	default BUSYBOX_DEFAULT_DIFF
-	help
-	  diff compares two files or directories and outputs the
-	  differences between them in a form that can be given to
-	  the patch command.
-
-config BUSYBOX_CONFIG_FEATURE_DIFF_LONG_OPTIONS
-	bool "Enable long options"
-	default BUSYBOX_DEFAULT_FEATURE_DIFF_LONG_OPTIONS
-	depends on BUSYBOX_CONFIG_DIFF && BUSYBOX_CONFIG_LONG_OPTS
-	help
-	  Enable use of long options.
-
-config BUSYBOX_CONFIG_FEATURE_DIFF_DIR
-	bool "Enable directory support"
-	default BUSYBOX_DEFAULT_FEATURE_DIFF_DIR
-	depends on BUSYBOX_CONFIG_DIFF
-	help
-	  This option enables support for directory and subdirectory
-	  comparison.
-
-config BUSYBOX_CONFIG_ED
-	bool "ed"
-	default BUSYBOX_DEFAULT_ED
-	help
-	  The original 1970's Unix text editor, from the days of teletypes.
-	  Small, simple, evil. Part of SUSv3. If you're not already using
-	  this, you don't need it.
-
-config BUSYBOX_CONFIG_SED
-	bool "sed"
-	default BUSYBOX_DEFAULT_SED
-	help
-	  sed is used to perform text transformations on a file
-	  or input from a pipeline.
-
 config BUSYBOX_CONFIG_FEATURE_ALLOW_EXEC
 	bool "Allow vi and awk to execute shell commands"
 	default BUSYBOX_DEFAULT_FEATURE_ALLOW_EXEC
diff --git a/package/utils/busybox/config/libbb/Config.in b/package/utils/busybox/config/libbb/Config.in
index fbccae580a..e66a15b692 100644
--- a/package/utils/busybox/config/libbb/Config.in
+++ b/package/utils/busybox/config/libbb/Config.in
@@ -28,9 +28,9 @@ config BUSYBOX_CONFIG_PASSWORD_MINLEN
 	help
 	  Minimum allowable password length.
 
-config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
+config BUSYBOX_CONFIG_MD5_SMALL
 	int "MD5: Trade bytes for speed (0:fast, 3:slow)"
-	default BUSYBOX_DEFAULT_MD5_SIZE_VS_SPEED
+	default BUSYBOX_DEFAULT_MD5_SMALL
 	range 0 3
 	help
 	  Trade binary size versus speed for the md5sum algorithm.
@@ -42,6 +42,16 @@ config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
 	  2                   3.0                5088
 	  3 (smallest)        5.1                4912
 
+config BUSYBOX_CONFIG_SHA3_SMALL
+	int "SHA3: Trade bytes for speed (0:fast, 1:slow)"
+	default BUSYBOX_DEFAULT_SHA3_SMALL
+	range 0 1
+	help
+	  Trade binary size versus speed for the sha3sum algorithm.
+	  SHA3_SMALL=0 compared to SHA3_SMALL=1 (approximate):
+	  64-bit x86: +270 bytes of code, 45% faster
+	  32-bit x86: +450 bytes of code, 75% faster
+
 config BUSYBOX_CONFIG_FEATURE_FAST_TOP
 	bool "Faster /proc scanning code (+100 bytes)"
 	default BUSYBOX_DEFAULT_FEATURE_FAST_TOP
@@ -108,6 +118,13 @@ config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
 	help
 	  Enable history saving in shells.
 
+config BUSYBOX_CONFIG_FEATURE_EDITING_SAVE_ON_EXIT
+	bool "Save history on shell exit, not after every command"
+	default BUSYBOX_DEFAULT_FEATURE_EDITING_SAVE_ON_EXIT
+	depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
+	help
+	  Save history on shell exit, not after every command.
+
 config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
 	bool "Reverse history search"
 	default BUSYBOX_DEFAULT_FEATURE_REVERSE_SEARCH
@@ -198,8 +215,8 @@ config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
 
 	  However, some systems do not mount anything on /.
 	  If you need to configure busybox for one of these systems,
-	  you may find useful to turn this option off to make df show
-	  initramfs statistic.
+	  you may find it useful to turn this option off to make df show
+	  initramfs statistics.
 
 	  Otherwise, choose Y.
 
diff --git a/package/utils/busybox/config/loginutils/Config.in b/package/utils/busybox/config/loginutils/Config.in
index 4d77ddb49e..7fbe6a0aec 100644
--- a/package/utils/busybox/config/loginutils/Config.in
+++ b/package/utils/busybox/config/loginutils/Config.in
@@ -216,6 +216,17 @@ config BUSYBOX_CONFIG_LOGIN
 	  Note that Busybox binary must be setuid root for this applet to
 	  work properly.
 
+config BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD
+	bool "Run logged in session in a child process"
+	default BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD if BUSYBOX_CONFIG_PAM
+	depends on BUSYBOX_CONFIG_LOGIN
+	help
+	  Run the logged in session in a child process.  This allows
+	  login to clean up things such as utmp entries or PAM sessions
+	  when the login session is complete.  If you use PAM, you
+	  almost always would want this to be set to Y, else PAM session
+	  will not be cleaned up.
+
 config BUSYBOX_CONFIG_PAM
 	bool "Support for PAM (Pluggable Authentication Modules)"
 	default BUSYBOX_DEFAULT_PAM
@@ -283,6 +294,13 @@ config BUSYBOX_CONFIG_CHPASSWD
 	  Reads a file of user name and password pairs from standard input
 	  and uses this information to update a group of existing users.
 
+config BUSYBOX_CONFIG_FEATURE_DEFAULT_PASSWD_ALGO
+	string "Default password encryption method (passwd -a, cryptpw -m parameter)"
+	default BUSYBOX_DEFAULT_FEATURE_DEFAULT_PASSWD_ALGO
+	depends on BUSYBOX_CONFIG_PASSWD || BUSYBOX_CONFIG_CRYPTPW
+	help
+	  Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512".
+
 config BUSYBOX_CONFIG_SU
 	bool "su"
 	default BUSYBOX_DEFAULT_SU
diff --git a/package/utils/busybox/config/mailutils/Config.in b/package/utils/busybox/config/mailutils/Config.in
index 36f7a4a1cc..64b9a2baa9 100644
--- a/package/utils/busybox/config/mailutils/Config.in
+++ b/package/utils/busybox/config/mailutils/Config.in
@@ -2,7 +2,6 @@
 menu "Mail Utilities"
 
 
-
 config BUSYBOX_CONFIG_MAKEMIME
 	bool "makemime"
 	default BUSYBOX_DEFAULT_MAKEMIME
diff --git a/package/utils/busybox/config/miscutils/Config.in b/package/utils/busybox/config/miscutils/Config.in
index b0ddc85b36..0e0e459a23 100644
--- a/package/utils/busybox/config/miscutils/Config.in
+++ b/package/utils/busybox/config/miscutils/Config.in
@@ -36,14 +36,11 @@ config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS
 	  brackets, facilitating programming.
 
 config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS
-	bool "Enable extra flags"
+	bool "Enable -m/-M"
 	default BUSYBOX_DEFAULT_FEATURE_LESS_FLAGS
 	depends on BUSYBOX_CONFIG_LESS
 	help
-	  The extra flags provided do the following:
-
-	  The -M flag enables a more sophisticated status line.
-	  The -m flag enables a simpler status line with a percentage.
+	  The -M/-m flag enables a more sophisticated status line.
 
 config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
 	bool "Enable marks"
@@ -106,6 +103,18 @@ config BUSYBOX_CONFIG_NANDDUMP
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
 	  Dump the content of raw NAND chip
+config BUSYBOX_CONFIG_RFKILL
+	bool "rfkill"
+	default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Enable/disable wireless devices.
+
+	  rfkill list : list all wireless devices
+	  rfkill list bluetooth : list all bluetooth devices
+	  rfkill list 1 : list device corresponding to the given index
+	  rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
+
 config BUSYBOX_CONFIG_SETSERIAL
 	bool "setserial"
 	default BUSYBOX_DEFAULT_SETSERIAL
@@ -153,6 +162,12 @@ config BUSYBOX_CONFIG_UBIUPDATEVOL
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
 	  Update a UBI volume.
+config BUSYBOX_CONFIG_WALL
+	bool "wall"
+	default BUSYBOX_DEFAULT_WALL
+	depends on BUSYBOX_CONFIG_FEATURE_UTMP
+	help
+	  Write a message to all users that are logged in.
 
 config BUSYBOX_CONFIG_ADJTIMEX
 	bool "adjtimex"
@@ -656,18 +671,6 @@ config BUSYBOX_CONFIG_READAHEAD
 	  As readahead(2) blocks until each file has been read, it is best to
 	  run this applet as a background job.
 
-config BUSYBOX_CONFIG_RFKILL
-	bool "rfkill"
-	default BUSYBOX_DEFAULT_RFKILL  # doesn't build on Ubuntu 9.04
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Enable/disable wireless devices.
-
-	  rfkill list : list all wireless devices
-	  rfkill list bluetooth : list all bluetooth devices
-	  rfkill list 1 : list device corresponding to the given index
-	  rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
-
 config BUSYBOX_CONFIG_RUNLEVEL
 	bool "runlevel"
 	default BUSYBOX_DEFAULT_RUNLEVEL
@@ -744,13 +747,6 @@ config BUSYBOX_CONFIG_VOLNAME
 	help
 	  Prints a CD-ROM volume name.
 
-config BUSYBOX_CONFIG_WALL
-	bool "wall"
-	default BUSYBOX_DEFAULT_WALL
-	depends on BUSYBOX_CONFIG_FEATURE_UTMP
-	help
-	  Write a message to all users that are logged in.
-
 config BUSYBOX_CONFIG_WATCHDOG
 	bool "watchdog"
 	default BUSYBOX_DEFAULT_WATCHDOG
diff --git a/package/utils/busybox/config/modutils/Config.in b/package/utils/busybox/config/modutils/Config.in
index cf263a3d07..9add56ef66 100644
--- a/package/utils/busybox/config/modutils/Config.in
+++ b/package/utils/busybox/config/modutils/Config.in
@@ -253,7 +253,7 @@ config BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS
 config BUSYBOX_CONFIG_DEFAULT_MODULES_DIR
 	string "Default directory containing modules"
 	default BUSYBOX_DEFAULT_DEFAULT_MODULES_DIR
-	depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_INSMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_MODINFO
+	depends on BUSYBOX_CONFIG_DEPMOD || BUSYBOX_CONFIG_MODPROBE || BUSYBOX_CONFIG_MODPROBE_SMALL || BUSYBOX_CONFIG_MODINFO
 	help
 	  Directory that contains kernel modules.
 	  Defaults to "/lib/modules"
diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in
index 26bde152c5..80dd42abd0 100644
--- a/package/utils/busybox/config/networking/Config.in
+++ b/package/utils/busybox/config/networking/Config.in
@@ -55,7 +55,7 @@ config BUSYBOX_CONFIG_NC_SERVER
 	  Allow netcat to act as a server.
 
 config BUSYBOX_CONFIG_NC_EXTRA
-	bool "Netcat extensions (-eiw and filename)"
+	bool "Netcat extensions (-eiw and -f FILE)"
 	default BUSYBOX_DEFAULT_NC_EXTRA
 	depends on BUSYBOX_CONFIG_NC
 	help
@@ -71,7 +71,7 @@ config BUSYBOX_CONFIG_NC_110_COMPAT
 	  This option makes nc closely follow original nc-1.10.
 	  The code is about 2.5k bigger. It enables
 	  -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
-	  busybox-specific extensions: -f FILE and -ll.
+	  busybox-specific extensions: -f FILE.
 config BUSYBOX_CONFIG_PING
 	bool "ping"
 	default BUSYBOX_DEFAULT_PING
@@ -292,14 +292,22 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
 	help
 	  Utilizes password settings from /etc/httpd.conf for basic
 	  authentication on a per url basis.
+	  Example for httpd.conf file:
+	  /adm:toor:PaSsWd
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
 	bool "Support MD5 crypted passwords for http Authentication"
 	default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5
 	depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
 	help
-	  Enables basic per URL authentication from /etc/httpd.conf
-	  using md5 passwords.
+	  Enables encrypted passwords, and wildcard user/passwords
+	  in httpd.conf file.
+	  User '*' means 'any system user name is ok',
+	  password of '*' means 'use system password for this user'
+	  Examples:
+	  /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
+	  /adm:root:*
+	  /wiki:*:*
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
 	bool "Support Common Gateway Interface (CGI)"
@@ -316,8 +324,8 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
 	help
 	  This option enables support for running scripts through an
 	  interpreter. Turn this on if you want PHP scripts to work
-	  properly. You need to supply an additional line in your httpd
-	  config file:
+	  properly. You need to supply an additional line in your
+	  httpd.conf file:
 	  *.php:/path/to/your/php
 
 config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
@@ -1036,8 +1044,8 @@ config BUSYBOX_CONFIG_WGET
 	bool "wget"
 	default BUSYBOX_DEFAULT_WGET
 	help
-	  wget is a utility for non-interactive download of files from HTTP,
-	  HTTPS, and FTP servers.
+	  wget is a utility for non-interactive download of files from HTTP
+	  and FTP servers.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
 	bool "Enable a nifty process meter (+2k)"
@@ -1061,16 +1069,18 @@ config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
 	  Support long options for the wget applet.
 
 config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
-	bool "Enable read timeout option -T SEC"
+	bool "Enable timeout option -T SEC"
 	default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
 	depends on BUSYBOX_CONFIG_WGET
 	help
-	  Supports network read timeout for wget, so that wget will give
-	  up and timeout when reading network data, through the -T command
-	  line option.  Currently only network data read timeout is
-	  supported (i.e., timeout is not applied to the DNS nor TCP
-	  connection initialization).  When FEATURE_WGET_LONG_OPTIONS is
-	  also enabled, the --timeout option will work in addition to -T.
+	  Supports network read and connect timeouts for wget,
+	  so that wget will give up and timeout, through the -T
+	  command line option.
+
+	  Currently only connect and network data read timeout are
+	  supported (i.e., timeout is not applied to the DNS query). When
+	  FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
+	  will work in addition to -T.
 
 config BUSYBOX_CONFIG_ZCIP
 	bool "zcip"
diff --git a/package/utils/busybox/config/networking/udhcp/Config.in b/package/utils/busybox/config/networking/udhcp/Config.in
index 64731f15fd..576a01a25f 100644
--- a/package/utils/busybox/config/networking/udhcp/Config.in
+++ b/package/utils/busybox/config/networking/udhcp/Config.in
@@ -4,7 +4,12 @@
 # see scripts/kbuild/config-language.txt.
 #
 
-
+config BUSYBOX_CONFIG_UDHCPC6
+	bool "udhcp client for DHCPv6 (udhcpc6)"
+	default BUSYBOX_DEFAULT_UDHCPC6  # not yet ready
+	depends on BUSYBOX_CONFIG_FEATURE_IPV6
+	help
+	  udhcpc6 is a DHCPv6 client
 
 config BUSYBOX_CONFIG_UDHCPD
 	bool "udhcp server (udhcpd)"
diff --git a/package/utils/busybox/config/printutils/Config.in b/package/utils/busybox/config/printutils/Config.in
index d22e4e9a49..cccc4a541f 100644
--- a/package/utils/busybox/config/printutils/Config.in
+++ b/package/utils/busybox/config/printutils/Config.in
@@ -7,7 +7,6 @@
 menu "Print Utilities"
 
 
-
 config BUSYBOX_CONFIG_LPD
 	bool "lpd"
 	default BUSYBOX_DEFAULT_LPD
diff --git a/package/utils/busybox/config/procps/Config.in b/package/utils/busybox/config/procps/Config.in
index e9c68d99f8..6eafbda0fa 100644
--- a/package/utils/busybox/config/procps/Config.in
+++ b/package/utils/busybox/config/procps/Config.in
@@ -11,6 +11,12 @@ config BUSYBOX_CONFIG_IOSTAT
 	default BUSYBOX_DEFAULT_IOSTAT
 	help
 	  Report CPU and I/O statistics
+config BUSYBOX_CONFIG_LSOF
+	bool "lsof"
+	default BUSYBOX_DEFAULT_LSOF
+	help
+	  Show open files in the format of:
+	  PID <TAB> /path/to/executable <TAB> /path/to/opened/file
 config BUSYBOX_CONFIG_MPSTAT
 	bool "mpstat"
 	default BUSYBOX_DEFAULT_MPSTAT
@@ -47,6 +53,59 @@ config BUSYBOX_CONFIG_SMEMCAP
 	help
 	  smemcap is a tool for capturing process data for smem,
 	  a memory usage statistic tool.
+config BUSYBOX_CONFIG_TOP
+	bool "top"
+	default BUSYBOX_DEFAULT_TOP
+	help
+	  The top program provides a dynamic real-time view of a running
+	  system.
+
+config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
+	bool "Show CPU per-process usage percentage"
+	default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE
+	depends on BUSYBOX_CONFIG_TOP
+	help
+	  Make top display CPU usage for each process.
+	  This adds about 2k.
+
+config BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS
+	bool "Show CPU global usage percentage"
+	default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_GLOBAL_PERCENTS
+	depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
+	help
+	  Makes top display "CPU: NN% usr NN% sys..." line.
+	  This adds about 0.5k.
+
+config BUSYBOX_CONFIG_FEATURE_TOP_SMP_CPU
+	bool "SMP CPU usage display ('c' key)"
+	default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_CPU
+	depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS
+	help
+	  Allow 'c' key to switch between individual/cumulative CPU stats
+	  This adds about 0.5k.
+
+config BUSYBOX_CONFIG_FEATURE_TOP_DECIMALS
+	bool "Show 1/10th of a percent in CPU/mem statistics"
+	default BUSYBOX_DEFAULT_FEATURE_TOP_DECIMALS
+	depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
+	help
+	  Show 1/10th of a percent in CPU/mem statistics.
+	  This adds about 0.3k.
+
+config BUSYBOX_CONFIG_FEATURE_TOP_SMP_PROCESS
+	bool "Show CPU process runs on ('j' field)"
+	default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_PROCESS
+	depends on BUSYBOX_CONFIG_TOP
+	help
+	  Show CPU where process was last found running on.
+	  This is the 'j' field.
+
+config BUSYBOX_CONFIG_FEATURE_TOPMEM
+	bool "Topmem command ('s' key)"
+	default BUSYBOX_DEFAULT_FEATURE_TOPMEM
+	depends on BUSYBOX_CONFIG_TOP
+	help
+	  Enable 's' in top (gives lots of memory info).
 config BUSYBOX_CONFIG_UPTIME
 	bool "uptime"
 	default BUSYBOX_DEFAULT_UPTIME
@@ -146,12 +205,20 @@ config BUSYBOX_CONFIG_PS
 config BUSYBOX_CONFIG_FEATURE_PS_WIDE
 	bool "Enable wide output option (-w)"
 	default BUSYBOX_DEFAULT_FEATURE_PS_WIDE
-	depends on BUSYBOX_CONFIG_PS
+	depends on BUSYBOX_CONFIG_PS && !BUSYBOX_CONFIG_DESKTOP
 	help
 	  Support argument 'w' for wide output.
 	  If given once, 132 chars are printed, and if given more
 	  than once, the length is unlimited.
 
+config BUSYBOX_CONFIG_FEATURE_PS_LONG
+	bool "Enable long output option (-l)"
+	default BUSYBOX_DEFAULT_FEATURE_PS_LONG
+	depends on BUSYBOX_CONFIG_PS && !BUSYBOX_CONFIG_DESKTOP
+	help
+	  Support argument 'l' for long output.
+	  Adds fields PPID, RSS, START, TIME & TTY
+
 config BUSYBOX_CONFIG_FEATURE_PS_TIME
 	bool "Enable time and elapsed time output"
 	default BUSYBOX_DEFAULT_FEATURE_PS_TIME
@@ -188,60 +255,6 @@ config BUSYBOX_CONFIG_BB_SYSCTL
 	help
 	  Configure kernel parameters at runtime.
 
-config BUSYBOX_CONFIG_TOP
-	bool "top"
-	default BUSYBOX_DEFAULT_TOP
-	help
-	  The top program provides a dynamic real-time view of a running
-	  system.
-
-config BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
-	bool "Show CPU per-process usage percentage"
-	default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE
-	depends on BUSYBOX_CONFIG_TOP
-	help
-	  Make top display CPU usage for each process.
-	  This adds about 2k.
-
-config BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS
-	bool "Show CPU global usage percentage"
-	default BUSYBOX_DEFAULT_FEATURE_TOP_CPU_GLOBAL_PERCENTS
-	depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
-	help
-	  Makes top display "CPU: NN% usr NN% sys..." line.
-	  This adds about 0.5k.
-
-config BUSYBOX_CONFIG_FEATURE_TOP_SMP_CPU
-	bool "SMP CPU usage display ('c' key)"
-	default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_CPU
-	depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS
-	help
-	  Allow 'c' key to switch between individual/cumulative CPU stats
-	  This adds about 0.5k.
-
-config BUSYBOX_CONFIG_FEATURE_TOP_DECIMALS
-	bool "Show 1/10th of a percent in CPU/mem statistics"
-	default BUSYBOX_DEFAULT_FEATURE_TOP_DECIMALS
-	depends on BUSYBOX_CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
-	help
-	  Show 1/10th of a percent in CPU/mem statistics.
-	  This adds about 0.3k.
-
-config BUSYBOX_CONFIG_FEATURE_TOP_SMP_PROCESS
-	bool "Show CPU process runs on ('j' field)"
-	default BUSYBOX_DEFAULT_FEATURE_TOP_SMP_PROCESS
-	depends on BUSYBOX_CONFIG_TOP
-	help
-	  Show CPU where process was last found running on.
-	  This is the 'j' field.
-
-config BUSYBOX_CONFIG_FEATURE_TOPMEM
-	bool "Topmem command ('s' key)"
-	default BUSYBOX_DEFAULT_FEATURE_TOPMEM
-	depends on BUSYBOX_CONFIG_TOP
-	help
-	  Enable 's' in top (gives lots of memory info).
-
 config BUSYBOX_CONFIG_FEATURE_SHOW_THREADS
 	bool "Support for showing threads in ps/pstree/top"
 	default BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS
diff --git a/package/utils/busybox/config/runit/Config.in b/package/utils/busybox/config/runit/Config.in
index 8d0e07baad..8074fb18f7 100644
--- a/package/utils/busybox/config/runit/Config.in
+++ b/package/utils/busybox/config/runit/Config.in
@@ -7,7 +7,6 @@
 menu "Runit Utilities"
 
 
-
 config BUSYBOX_CONFIG_RUNSV
 	bool "runsv"
 	default BUSYBOX_DEFAULT_RUNSV
diff --git a/package/utils/busybox/config/selinux/Config.in b/package/utils/busybox/config/selinux/Config.in
index 7597bb5a11..3340e4bb92 100644
--- a/package/utils/busybox/config/selinux/Config.in
+++ b/package/utils/busybox/config/selinux/Config.in
@@ -8,7 +8,6 @@ menu "SELinux Utilities"
 	depends on BUSYBOX_CONFIG_SELINUX
 
 
-
 config BUSYBOX_CONFIG_CHCON
 	bool "chcon"
 	default BUSYBOX_DEFAULT_CHCON
diff --git a/package/utils/busybox/config/shell/Config.in b/package/utils/busybox/config/shell/Config.in
index 594675a09e..c375f0c26e 100644
--- a/package/utils/busybox/config/shell/Config.in
+++ b/package/utils/busybox/config/shell/Config.in
@@ -156,6 +156,9 @@ config BUSYBOX_CONFIG_CTTYHACK
 
 	  # exec setsid sh -c 'exec sh </dev/tty1 >/dev/tty1 2>&1'
 
+	  Starting getty on a controlling tty from a shell script:
+
+	  # getty 115200 $(cttyhack)
 config BUSYBOX_CONFIG_HUSH
 	bool "hush"
 	default BUSYBOX_DEFAULT_HUSH
@@ -292,6 +295,7 @@ config BUSYBOX_CONFIG_MSH
 	  msh is deprecated and will be removed, please migrate to hush.
 
 
+
 choice
 	prompt "Choose which shell is aliased to 'sh' name"
 	default BUSYBOX_CONFIG_FEATURE_SH_IS_ASH
diff --git a/package/utils/busybox/config/sysklogd/Config.in b/package/utils/busybox/config/sysklogd/Config.in
index fe08eb2c98..de36a1e892 100644
--- a/package/utils/busybox/config/sysklogd/Config.in
+++ b/package/utils/busybox/config/sysklogd/Config.in
@@ -7,7 +7,6 @@
 menu "System Logging Utilities"
 
 
-
 config BUSYBOX_CONFIG_SYSLOGD
 	bool "syslogd"
 	default BUSYBOX_DEFAULT_SYSLOGD
@@ -114,6 +113,19 @@ config BUSYBOX_CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING
 	  from circular buffer, minimizing semaphore
 	  contention at some minor memory expense.
 
+config BUSYBOX_CONFIG_FEATURE_KMSG_SYSLOG
+	bool "Linux kernel printk buffer support"
+	default BUSYBOX_DEFAULT_FEATURE_KMSG_SYSLOG
+	depends on BUSYBOX_CONFIG_SYSLOGD
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  When you enable this feature, the syslogd utility will
+	  write system log message to the Linux kernel's printk buffer.
+	  This can be used as a smaller alternative to the syslogd IPC
+	  support, as klogd and logread aren't needed.
+
+	  NOTICE: Syslog facilities in log entries needs kernel 3.5+.
+
 config BUSYBOX_CONFIG_KLOGD
 	bool "klogd"
 	default BUSYBOX_DEFAULT_KLOGD
@@ -124,6 +136,9 @@ config BUSYBOX_CONFIG_KLOGD
 	  you wish to record the messages produced by the kernel,
 	  you should enable this option.
 
+comment "klogd should not be used together with syslog to kernel printk buffer"
+	depends on BUSYBOX_CONFIG_KLOGD && BUSYBOX_CONFIG_FEATURE_KMSG_SYSLOG
+
 config BUSYBOX_CONFIG_FEATURE_KLOGD_KLOGCTL
 	bool "Use the klogctl() interface"
 	default BUSYBOX_DEFAULT_FEATURE_KLOGD_KLOGCTL
diff --git a/package/utils/busybox/config/util-linux/Config.in b/package/utils/busybox/config/util-linux/Config.in
index 66751db698..f78234de82 100644
--- a/package/utils/busybox/config/util-linux/Config.in
+++ b/package/utils/busybox/config/util-linux/Config.in
@@ -11,6 +11,69 @@ config BUSYBOX_CONFIG_BLOCKDEV
 	default BUSYBOX_DEFAULT_BLOCKDEV
 	help
 	  Performs some ioctls with block devices.
+config BUSYBOX_CONFIG_FSTRIM
+	bool "fstrim"
+	default BUSYBOX_DEFAULT_FSTRIM
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Discard unused blocks on a mounted filesystem.
+config BUSYBOX_CONFIG_MDEV
+	bool "mdev"
+	default BUSYBOX_DEFAULT_MDEV
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  mdev is a mini-udev implementation for dynamically creating device
+	  nodes in the /dev directory.
+
+	  For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+	bool "Support /etc/mdev.conf"
+	default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF
+	depends on BUSYBOX_CONFIG_MDEV
+	help
+	  Add support for the mdev config file to control ownership and
+	  permissions of the device nodes.
+
+	  For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+	bool "Support subdirs/symlinks"
+	default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME
+	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+	help
+	  Add support for renaming devices and creating symlinks.
+
+	  For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
+	bool "Support regular expressions substitutions when renaming device"
+	default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP
+	depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+	help
+	  Add support for regular expressions substitutions when renaming
+	  device.
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
+	bool "Support command execution at device addition/removal"
+	default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
+	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+	help
+	  This adds support for an optional field to /etc/mdev.conf for
+	  executing commands when devices are created/removed.
+
+	  For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
+	bool "Support loading of firmwares"
+	default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
+	depends on BUSYBOX_CONFIG_MDEV
+	help
+	  Some devices need to load firmware before they can be usable.
+
+	  These devices will request userspace look up the files in
+	  /lib/firmware/ and if it exists, send it to the kernel for
+	  loading into the hardware.
 config BUSYBOX_CONFIG_REV
 	bool "rev"
 	default BUSYBOX_DEFAULT_REV
@@ -414,64 +477,6 @@ config BUSYBOX_CONFIG_LSUSB
 
 	  This version uses sysfs (/sys/bus/usb/devices) only.
 
-config BUSYBOX_CONFIG_MDEV
-	bool "mdev"
-	default BUSYBOX_DEFAULT_MDEV
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  mdev is a mini-udev implementation for dynamically creating device
-	  nodes in the /dev directory.
-
-	  For more information, please see docs/mdev.txt
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
-	bool "Support /etc/mdev.conf"
-	default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF
-	depends on BUSYBOX_CONFIG_MDEV
-	help
-	  Add support for the mdev config file to control ownership and
-	  permissions of the device nodes.
-
-	  For more information, please see docs/mdev.txt
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
-	bool "Support subdirs/symlinks"
-	default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME
-	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
-	help
-	  Add support for renaming devices and creating symlinks.
-
-	  For more information, please see docs/mdev.txt
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
-	bool "Support regular expressions substitutions when renaming device"
-	default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP
-	depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
-	help
-	  Add support for regular expressions substitutions when renaming
-	  device.
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
-	bool "Support command execution at device addition/removal"
-	default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
-	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
-	help
-	  This adds support for an optional field to /etc/mdev.conf for
-	  executing commands when devices are created/removed.
-
-	  For more information, please see docs/mdev.txt
-
-config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
-	bool "Support loading of firmwares"
-	default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
-	depends on BUSYBOX_CONFIG_MDEV
-	help
-	  Some devices need to load firmware before they can be usable.
-
-	  These devices will request userspace look up the files in
-	  /lib/firmware/ and if it exists, send it to the kernel for
-	  loading into the hardware.
-
 config BUSYBOX_CONFIG_MKSWAP
 	bool "mkswap"
 	default BUSYBOX_DEFAULT_MKSWAP
@@ -553,13 +558,18 @@ config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
 	  This also enables label or uuid support for swapon.
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
-	bool "Support mounting NFS file systems"
+	bool "Support mounting NFS file systems on Linux < 2.6.23"
 	default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
 	depends on BUSYBOX_CONFIG_MOUNT
 	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
-	  Enable mounting of NFS file systems.
+	  Enable mounting of NFS file systems on Linux kernels prior
+	  to version 2.6.23. Note that in this case mounting of NFS
+	  over IPv6 will not be possible.
+
+	  Note that this option links in RPC support from libc,
+	  which is rather large (~10 kbytes on uclibc).
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
 	bool "Support mounting CIFS/SMB file systems"
@@ -762,224 +772,6 @@ config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
 	  About the only reason to use this is if you've removed /proc from
 	  your kernel.
 
-config BUSYBOX_CONFIG_VOLUMEID
-	bool #No description makes it a hidden option
-	default BUSYBOX_DEFAULT_VOLUMEID
-
-menu "Filesystem/Volume identification"
-	depends on BUSYBOX_CONFIG_VOLUMEID
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
-	bool "Ext filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXT
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS
-	bool "btrfs filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BTRFS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
-	bool "Reiser filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_REISERFS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
-	bool "fat filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_FAT
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
-	bool "hfs filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_HFS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
-	bool "jfs filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_JFS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_UFS
-###	bool "ufs filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
-	bool "xfs filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_XFS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
-	bool "ntfs filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NTFS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
-	bool "iso9660 filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ISO9660
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
-	bool "udf filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UDF
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
-	bool "luks filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LUKS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
-	bool "linux swap filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXSWAP
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_LVM
-###	bool "lvm"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
-	bool "cramfs filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_HPFS
-###	bool "hpfs filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
-	bool "romfs filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ROMFS
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
-	bool "sysv filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SYSV
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_MINIX
-###	bool "minix filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### These only detect partition tables - not used (yet?)
-### config FEATURE_VOLUMEID_MAC
-###	bool "mac filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-###
-### config FEATURE_VOLUMEID_MSDOS
-###	bool "msdos filesystem"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
-	bool "ocfs2 filesystem"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_OCFS2
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-### config FEATURE_VOLUMEID_HIGHPOINTRAID
-###	bool "highpoint raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_ISWRAID
-###	bool "intel raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_LSIRAID
-###	bool "lsi raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_VIARAID
-###	bool "via raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_SILICONRAID
-###	bool "silicon raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_NVIDIARAID
-###	bool "nvidia raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-### config FEATURE_VOLUMEID_PROMISERAID
-###	bool "promise raid"
-###	default y
-###	depends on VOLUMEID
-###	help
-###	  TODO
-
-config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
-	bool "linuxraid"
-	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXRAID
-	depends on BUSYBOX_CONFIG_VOLUMEID
-	help
-	  TODO
-
-endmenu
+source package/utils/busybox/config/util-linux/volume_id/Config.in
 
 endmenu
diff --git a/package/utils/busybox/config/util-linux/volume_id/Config.in b/package/utils/busybox/config/util-linux/volume_id/Config.in
new file mode 100644
index 0000000000..306550b7b8
--- /dev/null
+++ b/package/utils/busybox/config/util-linux/volume_id/Config.in
@@ -0,0 +1,304 @@
+# DO NOT EDIT. This file is generated from Config.src
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+config BUSYBOX_CONFIG_VOLUMEID
+	bool #No description makes it a hidden option
+	default BUSYBOX_DEFAULT_VOLUMEID
+
+menu "Filesystem/Volume identification"
+	depends on BUSYBOX_CONFIG_VOLUMEID
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS
+	bool "btrfs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BTRFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
+	bool "cramfs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXFAT
+	bool "exFAT filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXFAT
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  exFAT (extended FAT) is a proprietary file system designed especially
+	  for flash drives. It has many features from NTFS, but with less
+	  overhead. exFAT is used on most SDXC cards for consumer electronics.
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
+	bool "Ext filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXT
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_F2FS
+	bool "f2fs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_F2FS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  F2FS (aka Flash-Friendly File System) is a log-structured file system,
+	  which is adapted to newer forms of storage. F2FS also remedies some
+	  known issues of the older log structured file systems, such as high
+	  cleaning overhead.
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
+	bool "fat filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_FAT
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
+	bool "hfs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_HFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
+	bool "iso9660 filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ISO9660
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
+	bool "jfs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_JFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
+	bool "linuxraid"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXRAID
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
+	bool "linux swap filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXSWAP
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
+	bool "luks filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LUKS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NILFS
+	bool "nilfs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NILFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  NILFS is a New Implementation of a Log-Structured File System (LFS)
+	  that supports continuous snapshots. This provides features like
+	  versioning of the entire filesystem, restoration of files that
+	  were deleted a few minutes ago. NILFS keeps consistency like
+	  conventional LFS, so it provides quick recovery after system crashes.
+
+	  The possible use of NILFS includes versioning, tamper detection,
+	  SOX compliance logging, and so forth. It can serve as an alternative
+	  filesystem for Linux desktop environment, or as a basis of advanced
+	  storage appliances.
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
+	bool "ntfs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NTFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
+	bool "ocfs2 filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_OCFS2
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
+	bool "Reiser filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_REISERFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
+	bool "romfs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ROMFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS
+	bool "SquashFS filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SQUASHFS
+	depends on BUSYBOX_CONFIG_VOLUMEID && BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
+	help
+	  Squashfs is a compressed read-only filesystem for Linux. Squashfs is
+	  intended for general read-only filesystem use and in constrained block
+	  device/memory systems (e.g. embedded systems) where low overhead is
+	  needed.
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
+	bool "sysv filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SYSV
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
+	bool "udf filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UDF
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+### config FEATURE_VOLUMEID_HIGHPOINTRAID
+###	bool "highpoint raid"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_HPFS
+###	bool "hpfs filesystem"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_ISWRAID
+###	bool "intel raid"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_LSIRAID
+###	bool "lsi raid"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_LVM
+###	bool "lvm"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_MAC
+###	bool "mac filesystem"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_MINIX
+###	bool "minix filesystem"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_MSDOS
+###	bool "msdos filesystem"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_NVIDIARAID
+###	bool "nvidia raid"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_PROMISERAID
+###	bool "promise raid"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_SILICONRAID
+###	bool "silicon raid"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_UFS
+###	bool "ufs filesystem"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+### config FEATURE_VOLUMEID_VIARAID
+###	bool "via raid"
+###	default y
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
+	bool "xfs filesystem"
+	default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_XFS
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+
+endmenu