busybox: Update config for 1.24.1

r47288 updated to Busybox 1.24.1 but did not update the configuration.

The configuration is updated by running

cd config
../convert_menuconfig.pl .../build_dir/target-*/busybox-1.24.1
cd ..
./convert_defaults.pl < .../build_dir/target-*/busybox-1.24.1/.config > \
    Config-defaults.in

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47775 3c298f89-4303-0410-b956-a3cf2f4a3e73

7 files changed, 412 insertions, 235 deletions

diff --git a/package/utils/busybox/Config-defaults.in b/package/utils/busybox/Config-defaults.in
index 2689b4f71a..75c59760c3 100644
--- a/package/utils/busybox/Config-defaults.in
+++ b/package/utils/busybox/Config-defaults.in
@@ -361,6 +361,9 @@ config BUSYBOX_DEFAULT_FEATURE_GZIP_LONG_OPTIONS
 config BUSYBOX_DEFAULT_GZIP_FAST
 	int
 	default 0
+config BUSYBOX_DEFAULT_FEATURE_GZIP_LEVELS
+	bool
+	default n
 config BUSYBOX_DEFAULT_LZOP
 	bool
 	default n
@@ -430,6 +433,21 @@ config BUSYBOX_DEFAULT_FEATURE_DATE_NANO
 config BUSYBOX_DEFAULT_FEATURE_DATE_COMPAT
 	bool
 	default n
+config BUSYBOX_DEFAULT_DD
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE
+	bool
+	default n
+config BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_DD_STATUS
+	bool
+	default n
 config BUSYBOX_DEFAULT_HOSTID
 	bool
 	default n
@@ -442,6 +460,12 @@ config BUSYBOX_DEFAULT_GROUPS
 config BUSYBOX_DEFAULT_SHUF
 	bool
 	default n
+config BUSYBOX_DEFAULT_SYNC
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_SYNC_FANCY
+	bool
+	default n
 config BUSYBOX_DEFAULT_TEST
 	bool
 	default y
@@ -466,6 +490,9 @@ config BUSYBOX_DEFAULT_FEATURE_TR_CLASSES
 config BUSYBOX_DEFAULT_FEATURE_TR_EQUIV
 	bool
 	default n
+config BUSYBOX_DEFAULT_TRUNCATE
+	bool
+	default n
 config BUSYBOX_DEFAULT_UNLINK
 	bool
 	default n
@@ -514,18 +541,6 @@ config BUSYBOX_DEFAULT_FEATURE_CP_LONG_OPTIONS
 config BUSYBOX_DEFAULT_CUT
 	bool
 	default y
-config BUSYBOX_DEFAULT_DD
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE
-	bool
-	default n
-config BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS
-	bool
-	default y
 config BUSYBOX_DEFAULT_DF
 	bool
 	default y
@@ -730,9 +745,6 @@ config BUSYBOX_DEFAULT_STTY
 config BUSYBOX_DEFAULT_SUM
 	bool
 	default n
-config BUSYBOX_DEFAULT_SYNC
-	bool
-	default y
 config BUSYBOX_DEFAULT_TAC
 	bool
 	default n
@@ -757,6 +769,9 @@ config BUSYBOX_DEFAULT_TTY
 config BUSYBOX_DEFAULT_UNAME
 	bool
 	default y
+config BUSYBOX_DEFAULT_UNAME_OSNAME
+	string
+	default "GNU/Linux"
 config BUSYBOX_DEFAULT_UNEXPAND
 	bool
 	default n
@@ -1348,9 +1363,42 @@ config BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
 config BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
 	bool
 	default n
+config BUSYBOX_DEFAULT_MOUNT
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
+	bool
+	default n
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
+	bool
+	default n
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
+	bool
+	default n
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
+	bool
+	default n
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB
+	bool
+	default n
 config BUSYBOX_DEFAULT_REV
 	bool
 	default n
+config BUSYBOX_DEFAULT_UEVENT
+	bool
+	default n
 config BUSYBOX_DEFAULT_ACPID
 	bool
 	default n
@@ -1486,33 +1534,6 @@ config BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID
 config BUSYBOX_DEFAULT_MORE
 	bool
 	default n
-config BUSYBOX_DEFAULT_MOUNT
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
-	bool
-	default n
-config BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
-	bool
-	default n
-config BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
-	bool
-	default n
-config BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
-	bool
-	default n
-config BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
-	bool
-	default y
 config BUSYBOX_DEFAULT_PIVOT_ROOT
 	bool
 	default y
@@ -1645,6 +1666,18 @@ config BUSYBOX_DEFAULT_FEATURE_CROND_CALL_SENDMAIL
 config BUSYBOX_DEFAULT_FEATURE_CROND_DIR
 	string
 	default "/etc"
+config BUSYBOX_DEFAULT_I2CGET
+	bool
+	default n
+config BUSYBOX_DEFAULT_I2CSET
+	bool
+	default n
+config BUSYBOX_DEFAULT_I2CDUMP
+	bool
+	default n
+config BUSYBOX_DEFAULT_I2CDETECT
+	bool
+	default n
 config BUSYBOX_DEFAULT_LESS
 	bool
 	default y
@@ -1657,6 +1690,9 @@ config BUSYBOX_DEFAULT_FEATURE_LESS_BRACKETS
 config BUSYBOX_DEFAULT_FEATURE_LESS_FLAGS
 	bool
 	default n
+config BUSYBOX_DEFAULT_FEATURE_LESS_TRUNCATE
+	bool
+	default n
 config BUSYBOX_DEFAULT_FEATURE_LESS_MARKS
 	bool
 	default n
@@ -1930,6 +1966,27 @@ config BUSYBOX_DEFAULT_PING6
 config BUSYBOX_DEFAULT_FEATURE_FANCY_PING
 	bool
 	default y
+config BUSYBOX_DEFAULT_WGET
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS
+	bool
+	default y
+config BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
+	bool
+	default n
+config BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL
+	bool
+	default n
+config BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER
+	bool
+	default n
 config BUSYBOX_DEFAULT_WHOIS
 	bool
 	default n
@@ -2113,6 +2170,9 @@ config BUSYBOX_DEFAULT_FEATURE_IP_LINK
 config BUSYBOX_DEFAULT_FEATURE_IP_ROUTE
 	bool
 	default y
+config BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR
+	string
+	default "n"
 config BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL
 	bool
 	default n
@@ -2302,21 +2362,6 @@ config BUSYBOX_DEFAULT_UDPSVD
 config BUSYBOX_DEFAULT_VCONFIG
 	bool
 	default n
-config BUSYBOX_DEFAULT_WGET
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS
-	bool
-	default y
-config BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
-	bool
-	default n
 config BUSYBOX_DEFAULT_ZCIP
 	bool
 	default n
diff --git a/package/utils/busybox/config/archival/Config.in b/package/utils/busybox/config/archival/Config.in
index e977bb49d8..1ca610cad6 100644
--- a/package/utils/busybox/config/archival/Config.in
+++ b/package/utils/busybox/config/archival/Config.in
@@ -236,6 +236,16 @@ config BUSYBOX_CONFIG_GZIP_FAST
 	  1: larger buffers, larger hash-tables
 	  2: larger buffers, largest hash-tables
 	  Larger models may give slightly better compression
+
+config BUSYBOX_CONFIG_FEATURE_GZIP_LEVELS
+	bool "Enable compression levels"
+	default BUSYBOX_DEFAULT_FEATURE_GZIP_LEVELS
+	depends on BUSYBOX_CONFIG_GZIP
+	help
+	  Enable support for compression levels 4-9. The default level
+	  is 6. If levels 1-3 are specified, 4 is used.
+	  If this option is not selected, -N options are ignored and -9
+	  is used.
 config BUSYBOX_CONFIG_LZOP
 	bool "lzop"
 	default BUSYBOX_DEFAULT_LZOP
diff --git a/package/utils/busybox/config/coreutils/Config.in b/package/utils/busybox/config/coreutils/Config.in
index f50823f012..2f9473857b 100644
--- a/package/utils/busybox/config/coreutils/Config.in
+++ b/package/utils/busybox/config/coreutils/Config.in
@@ -58,6 +58,50 @@ config BUSYBOX_CONFIG_FEATURE_DATE_COMPAT
 	  With this option off, 'date DATE' is 'date -s DATE' support
 	  the same format. With it on, 'date DATE' additionally supports
 	  MMDDhhmm[[YY]YY][.ss] format.
+config BUSYBOX_CONFIG_DD
+	bool "dd"
+	default BUSYBOX_DEFAULT_DD
+	help
+	  dd copies a file (from standard input to standard output,
+	  by default) using specific input and output blocksizes,
+	  while optionally performing conversions on it.
+
+config BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING
+	bool "Enable signal handling for status reporting"
+	default BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING
+	depends on BUSYBOX_CONFIG_DD
+	help
+	  Sending a SIGUSR1 signal to a running `dd' process makes it
+	  print to standard error the number of records read and written
+	  so far, then to resume copying.
+
+	  $ dd if=/dev/zero of=/dev/null &
+	  $ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
+	  10899206+0 records in
+	  10899206+0 records out
+
+config BUSYBOX_CONFIG_FEATURE_DD_THIRD_STATUS_LINE
+	bool "Enable the third status line upon signal"
+	default BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE
+	depends on BUSYBOX_CONFIG_DD && BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING
+	help
+	  Displays a coreutils-like third status line with transferred bytes,
+	  elapsed time and speed.
+
+config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS
+	bool "Enable ibs, obs and conv options"
+	default BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS
+	depends on BUSYBOX_CONFIG_DD
+	help
+	  Enables support for writing a certain number of bytes in and out,
+	  at a time, and performing conversions on the data stream.
+
+config BUSYBOX_CONFIG_FEATURE_DD_STATUS
+	bool "Enable status display options"
+	default BUSYBOX_DEFAULT_FEATURE_DD_STATUS
+	depends on BUSYBOX_CONFIG_DD
+	help
+	  Enables support for status=noxfer/none option.
 config BUSYBOX_CONFIG_HOSTID
 	bool "hostid"
 	default BUSYBOX_DEFAULT_HOSTID
@@ -79,6 +123,18 @@ config BUSYBOX_CONFIG_SHUF
 	default BUSYBOX_DEFAULT_SHUF
 	help
 	  Generate random permutations
+config BUSYBOX_CONFIG_SYNC
+	bool "sync"
+	default BUSYBOX_DEFAULT_SYNC
+	help
+	  sync is used to flush filesystem buffers.
+config BUSYBOX_CONFIG_FEATURE_SYNC_FANCY
+	bool "Enable -d and -f flags (requres syncfs(2) in libc)"
+	default BUSYBOX_DEFAULT_FEATURE_SYNC_FANCY
+	depends on BUSYBOX_CONFIG_SYNC
+	help
+	  sync -d FILE... executes fdatasync() on each FILE.
+	  sync -f FILE... executes syncfs() on each FILE.
 config BUSYBOX_CONFIG_TEST
 	bool "test"
 	default BUSYBOX_DEFAULT_TEST
@@ -139,6 +195,12 @@ config BUSYBOX_CONFIG_FEATURE_TR_EQUIV
 	  replace all instances of 'a' with 'xyz'. This option is mainly
 	  useful for cases when no other way of expressing a character
 	  is possible.
+config BUSYBOX_CONFIG_TRUNCATE
+	bool "truncate"
+	default BUSYBOX_DEFAULT_TRUNCATE
+	help
+	  truncate truncates files to a given size. If a file does
+	  not exist, it is created unless told otherwise.
 config BUSYBOX_CONFIG_UNLINK
 	bool "unlink"
 	default BUSYBOX_DEFAULT_UNLINK
@@ -166,7 +228,7 @@ config BUSYBOX_CONFIG_CAL
 	bool "cal"
 	default BUSYBOX_DEFAULT_CAL
 	help
-	  cal is used to display a monthly calender.
+	  cal is used to display a monthly calendar.
 
 config BUSYBOX_CONFIG_CATV
 	bool "catv"
@@ -242,44 +304,6 @@ config BUSYBOX_CONFIG_CUT
 	  cut is used to print selected parts of lines from
 	  each file to stdout.
 
-config BUSYBOX_CONFIG_DD
-	bool "dd"
-	default BUSYBOX_DEFAULT_DD
-	help
-	  dd copies a file (from standard input to standard output,
-	  by default) using specific input and output blocksizes,
-	  while optionally performing conversions on it.
-
-config BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING
-	bool "Enable DD signal handling for status reporting"
-	default BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING
-	depends on BUSYBOX_CONFIG_DD
-	help
-	  Sending a SIGUSR1 signal to a running `dd' process makes it
-	  print to standard error the number of records read and written
-	  so far, then to resume copying.
-
-	  $ dd if=/dev/zero of=/dev/null&
-	  $ pid=$! kill -USR1 $pid; sleep 1; kill $pid
-	  10899206+0 records in
-	  10899206+0 records out
-
-config BUSYBOX_CONFIG_FEATURE_DD_THIRD_STATUS_LINE
-	bool "Enable the third status line upon signal"
-	default BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE
-	depends on BUSYBOX_CONFIG_DD && BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING
-	help
-	  Displays a coreutils-like third status line with transferred bytes,
-	  elapsed time and speed.
-
-config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS
-	bool "Enable ibs, obs and conv options"
-	default BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS
-	depends on BUSYBOX_CONFIG_DD
-	help
-	  Enables support for writing a certain number of bytes in and out,
-	  at a time, and performing conversions on the data stream.
-
 config BUSYBOX_CONFIG_DF
 	bool "df"
 	default BUSYBOX_DEFAULT_DF
@@ -764,12 +788,6 @@ config BUSYBOX_CONFIG_SUM
 	help
 	  checksum and count the blocks in a file
 
-config BUSYBOX_CONFIG_SYNC
-	bool "sync"
-	default BUSYBOX_DEFAULT_SYNC
-	help
-	  sync is used to flush filesystem buffers.
-
 config BUSYBOX_CONFIG_TAC
 	bool "tac"
 	default BUSYBOX_DEFAULT_TAC
@@ -829,6 +847,14 @@ config BUSYBOX_CONFIG_UNAME
 	help
 	  uname is used to print system information.
 
+config BUSYBOX_CONFIG_UNAME_OSNAME
+	string "Operating system name"
+	default BUSYBOX_DEFAULT_UNAME_OSNAME
+	depends on BUSYBOX_CONFIG_UNAME
+	help
+	  Sets the operating system name reported by uname -o.  The
+	  default BUSYBOX_DEFAULT_UNAME_OSNAME "GNU/Linux".
+
 config BUSYBOX_CONFIG_UNEXPAND
 	bool "unexpand"
 	default BUSYBOX_DEFAULT_UNEXPAND
diff --git a/package/utils/busybox/config/miscutils/Config.in b/package/utils/busybox/config/miscutils/Config.in
index 7819e30583..c6deaafb62 100644
--- a/package/utils/busybox/config/miscutils/Config.in
+++ b/package/utils/busybox/config/miscutils/Config.in
@@ -48,6 +48,34 @@ config BUSYBOX_CONFIG_FEATURE_CROND_DIR
 	depends on BUSYBOX_CONFIG_CROND || BUSYBOX_CONFIG_CRONTAB
 	help
 	  Location of crond spool.
+config BUSYBOX_CONFIG_I2CGET
+	bool "i2cget"
+	default BUSYBOX_DEFAULT_I2CGET
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Read from I2C/SMBus chip registers.
+
+config BUSYBOX_CONFIG_I2CSET
+	bool "i2cset"
+	default BUSYBOX_DEFAULT_I2CSET
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Set I2C registers.
+
+config BUSYBOX_CONFIG_I2CDUMP
+	bool "i2cdump"
+	default BUSYBOX_DEFAULT_I2CDUMP
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Examine I2C registers.
+
+config BUSYBOX_CONFIG_I2CDETECT
+	bool "i2cdetect"
+	default BUSYBOX_DEFAULT_I2CDETECT
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  Detect I2C chips.
+
 config BUSYBOX_CONFIG_LESS
 	bool "less"
 	default BUSYBOX_DEFAULT_LESS
@@ -75,6 +103,14 @@ config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS
 	help
 	  The -M/-m flag enables a more sophisticated status line.
 
+config BUSYBOX_CONFIG_FEATURE_LESS_TRUNCATE
+	bool "Enable -S"
+	default BUSYBOX_DEFAULT_FEATURE_LESS_TRUNCATE
+	depends on BUSYBOX_CONFIG_LESS
+	help
+	  The -S flag causes long lines to be truncated rather than
+	  wrapped.
+
 config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
 	bool "Enable marks"
 	default BUSYBOX_DEFAULT_FEATURE_LESS_MARKS
diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in
index b3dd8c8b89..40b3c68975 100644
--- a/package/utils/busybox/config/networking/Config.in
+++ b/package/utils/busybox/config/networking/Config.in
@@ -94,6 +94,89 @@ config BUSYBOX_CONFIG_FEATURE_FANCY_PING
 	help
 	  Make the output from the ping applet include statistics, and at the
 	  same time provide full support for ICMP packets.
+config BUSYBOX_CONFIG_WGET
+	bool "wget"
+	default BUSYBOX_DEFAULT_WGET
+	help
+	  wget is a utility for non-interactive download of files from HTTP
+	  and FTP servers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
+	bool "Enable a nifty process meter (+2k)"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Enable the transfer progress bar for wget transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
+	bool "Enable HTTP authentication"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Support authenticated HTTP transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
+	bool "Enable long options"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS
+	depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
+	help
+	  Support long options for the wget applet.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
+	bool "Enable timeout option -T SEC"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Supports network read and connect timeouts for wget,
+	  so that wget will give up and timeout, through the -T
+	  command line option.
+
+	  Currently only connect and network data read timeout are
+	  supported (i.e., timeout is not applied to the DNS query). When
+	  FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
+	  will work in addition to -T.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL
+	bool "Try to connect to HTTPS using openssl"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Choose how wget establishes SSL connection for https:// URLs.
+
+	  Busybox itself contains no SSL code. wget will spawn
+	  a helper program to talk over HTTPS.
+
+	  OpenSSL has a simple SSL client for debug purposes.
+	  If you select "openssl" helper, wget will effectively call
+	  "openssl s_client -quiet -connect IP:443 2>/dev/null"
+	  and pipe its data through it.
+	  Note inconvenient API: host resolution is done twice,
+	  and there is no guarantee openssl's idea of IPv6 address
+	  format is the same as ours.
+	  Another problem is that s_client prints debug information
+	  to stderr, and it needs to be suppressed. This means
+	  all error messages get suppressed too.
+	  openssl is also a big binary, often dynamically linked
+	  against ~15 libraries.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_SSL_HELPER
+	bool "Try to connect to HTTPS using ssl_helper"
+	default BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER
+	depends on BUSYBOX_CONFIG_WGET
+	help
+	  Choose how wget establishes SSL connection for https:// URLs.
+
+	  Busybox itself contains no SSL code. wget will spawn
+	  a helper program to talk over HTTPS.
+
+	  ssl_helper is a tool which can be built statically
+	  from busybox sources against a small embedded SSL library.
+	  Please see networking/ssl_helper/README.
+	  It does not require double host resolution and emits
+	  error messages to stderr.
+
+	  Precompiled static binary may be available at
+	  http://busybox.net/downloads/binaries/
 config BUSYBOX_CONFIG_WHOIS
 	bool "whois"
 	default BUSYBOX_DEFAULT_WHOIS
@@ -626,6 +709,13 @@ config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
 	help
 	  Add support for routing table management to "ip".
 
+config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR
+	string "ip route configuration directory"
+	default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR
+	depends on BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+	help
+	  Location of the "ip" applet routing configuration.
+
 config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
 	bool "ip tunnel"
 	default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL
@@ -849,8 +939,7 @@ config BUSYBOX_CONFIG_TELNETD
 
 	  Note that for busybox telnetd to work you need several things:
 	  First of all, your kernel needs:
-		  UNIX98_PTYS=y
-		  DEVPTS_FS=y
+		  CONFIG_UNIX98_PTYS=y
 
 	  Next, you need a /dev/pts directory on your root filesystem:
 
@@ -1047,48 +1136,6 @@ config BUSYBOX_CONFIG_VCONFIG
 	help
 	  Creates, removes, and configures VLAN interfaces
 
-config BUSYBOX_CONFIG_WGET
-	bool "wget"
-	default BUSYBOX_DEFAULT_WGET
-	help
-	  wget is a utility for non-interactive download of files from HTTP
-	  and FTP servers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
-	bool "Enable a nifty process meter (+2k)"
-	default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR
-	depends on BUSYBOX_CONFIG_WGET
-	help
-	  Enable the transfer progress bar for wget transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
-	bool "Enable HTTP authentication"
-	default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
-	depends on BUSYBOX_CONFIG_WGET
-	help
-	  Support authenticated HTTP transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
-	bool "Enable long options"
-	default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS
-	depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
-	help
-	  Support long options for the wget applet.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
-	bool "Enable timeout option -T SEC"
-	default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
-	depends on BUSYBOX_CONFIG_WGET
-	help
-	  Supports network read and connect timeouts for wget,
-	  so that wget will give up and timeout, through the -T
-	  command line option.
-
-	  Currently only connect and network data read timeout are
-	  supported (i.e., timeout is not applied to the DNS query). When
-	  FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
-	  will work in addition to -T.
-
 config BUSYBOX_CONFIG_ZCIP
 	bool "zcip"
 	default BUSYBOX_DEFAULT_ZCIP
diff --git a/package/utils/busybox/config/selinux/Config.in b/package/utils/busybox/config/selinux/Config.in
index 3340e4bb92..1d23f7de43 100644
--- a/package/utils/busybox/config/selinux/Config.in
+++ b/package/utils/busybox/config/selinux/Config.in
@@ -64,7 +64,7 @@ config BUSYBOX_CONFIG_RUNCON
 	default BUSYBOX_DEFAULT_RUNCON
 	depends on BUSYBOX_CONFIG_SELINUX
 	help
-	  Enable support to run command in speficied security context.
+	  Enable support to run command in specified security context.
 
 config BUSYBOX_CONFIG_FEATURE_RUNCON_LONG_OPTIONS
 	bool "Enable long options"
diff --git a/package/utils/busybox/config/util-linux/Config.in b/package/utils/busybox/config/util-linux/Config.in
index 8d1464dc0c..8c87f53ed2 100644
--- a/package/utils/busybox/config/util-linux/Config.in
+++ b/package/utils/busybox/config/util-linux/Config.in
@@ -80,11 +80,112 @@ config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
 	  These devices will request userspace look up the files in
 	  /lib/firmware/ and if it exists, send it to the kernel for
 	  loading into the hardware.
+config BUSYBOX_CONFIG_MOUNT
+	bool "mount"
+	default BUSYBOX_DEFAULT_MOUNT
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  All files and filesystems in Unix are arranged into one big directory
+	  tree. The 'mount' utility is used to graft a filesystem onto a
+	  particular part of the tree. A filesystem can either live on a block
+	  device, or it can be accessible over the network, as is the case with
+	  NFS filesystems. Most people using BusyBox will also want to enable
+	  the 'mount' utility.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+	bool "Support option -f"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable support for faking a file system mount.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
+	bool "Support option -v"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable multi-level -v[vv...] verbose messages. Useful if you
+	  debug mount problems and want to see what is exactly passed
+	  to the kernel.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
+	bool "Support mount helpers"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable mounting of virtual file systems via external helpers.
+	  E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+	  "obexfs -b00.11.22.33.44.55 /mnt"
+	  Also "mount -t sometype [-o opts] fs /mnt" will try
+	  "sometype [-o opts] fs /mnt" if simple mount syscall fails.
+	  The idea is to use such virtual filesystems in /etc/fstab.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
+	bool "Support specifying devices by label or UUID"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
+	depends on BUSYBOX_CONFIG_MOUNT
+	select BUSYBOX_CONFIG_VOLUMEID
+	help
+	  This allows for specifying a device by label or uuid, rather than by
+	  name. This feature utilizes the same functionality as blkid/findfs.
+	  This also enables label or uuid support for swapon.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
+	bool "Support mounting NFS file systems on Linux < 2.6.23"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
+	depends on BUSYBOX_CONFIG_MOUNT
+	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+	select BUSYBOX_CONFIG_FEATURE_SYSLOG
+	help
+	  Enable mounting of NFS file systems on Linux kernels prior
+	  to version 2.6.23. Note that in this case mounting of NFS
+	  over IPv6 will not be possible.
+
+	  Note that this option links in RPC support from libc,
+	  which is rather large (~10 kbytes on uclibc).
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
+	bool "Support mounting CIFS/SMB file systems"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable support for samba mounts.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
+	depends on BUSYBOX_CONFIG_MOUNT
+	bool "Support lots of -o flags in mount"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
+	help
+	  Without this, mount only supports ro/rw/remount. With this, it
+	  supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+	  noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+	  private, unbindable, rshared, rslave, rprivate, and runbindable.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+	depends on BUSYBOX_CONFIG_MOUNT
+	bool "Support /etc/fstab and -a"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
+	help
+	  Support mount all and looking for files in /etc/fstab.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB
+	depends on BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+	bool "Support -T <alt_fstab>"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB
+	help
+	  Support mount -T (specifying an alternate fstab)
 config BUSYBOX_CONFIG_REV
 	bool "rev"
 	default BUSYBOX_DEFAULT_REV
 	help
 	  Reverse lines of a file or files.
+config BUSYBOX_CONFIG_UEVENT
+	bool "uevent"
+	default BUSYBOX_DEFAULT_UEVENT
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
+	  uevent is a netlink listener for kernel uevent notifications
+	  sent via netlink. It is usually used for dynamic device creation.
 
 config BUSYBOX_CONFIG_ACPID
 	bool "acpid"
@@ -513,94 +614,6 @@ config BUSYBOX_CONFIG_MORE
 	  you will probably find this utility very helpful. If you don't have
 	  any need to reading text files, you can leave this disabled.
 
-config BUSYBOX_CONFIG_MOUNT
-	bool "mount"
-	default BUSYBOX_DEFAULT_MOUNT
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  All files and filesystems in Unix are arranged into one big directory
-	  tree. The 'mount' utility is used to graft a filesystem onto a
-	  particular part of the tree. A filesystem can either live on a block
-	  device, or it can be accessible over the network, as is the case with
-	  NFS filesystems. Most people using BusyBox will also want to enable
-	  the 'mount' utility.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
-	bool "Support option -f"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	  Enable support for faking a file system mount.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
-	bool "Support option -v"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	  Enable multi-level -v[vv...] verbose messages. Useful if you
-	  debug mount problems and want to see what is exactly passed
-	  to the kernel.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
-	bool "Support mount helpers"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	  Enable mounting of virtual file systems via external helpers.
-	  E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
-	  "obexfs -b00.11.22.33.44.55 /mnt"
-	  Also "mount -t sometype [-o opts] fs /mnt" will try
-	  "sometype [-o opts] fs /mnt" if simple mount syscall fails.
-	  The idea is to use such virtual filesystems in /etc/fstab.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
-	bool "Support specifying devices by label or UUID"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
-	depends on BUSYBOX_CONFIG_MOUNT
-	select BUSYBOX_CONFIG_VOLUMEID
-	help
-	  This allows for specifying a device by label or uuid, rather than by
-	  name. This feature utilizes the same functionality as blkid/findfs.
-	  This also enables label or uuid support for swapon.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
-	bool "Support mounting NFS file systems on Linux < 2.6.23"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
-	depends on BUSYBOX_CONFIG_MOUNT
-	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
-	select BUSYBOX_CONFIG_FEATURE_SYSLOG
-	help
-	  Enable mounting of NFS file systems on Linux kernels prior
-	  to version 2.6.23. Note that in this case mounting of NFS
-	  over IPv6 will not be possible.
-
-	  Note that this option links in RPC support from libc,
-	  which is rather large (~10 kbytes on uclibc).
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
-	bool "Support mounting CIFS/SMB file systems"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	  Enable support for samba mounts.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
-	depends on BUSYBOX_CONFIG_MOUNT
-	bool "Support lots of -o flags in mount"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
-	help
-	  Without this, mount only supports ro/rw/remount. With this, it
-	  supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
-	  noatime, diratime, nodiratime, loud, bind, move, shared, slave,
-	  private, unbindable, rshared, rslave, rprivate, and runbindable.
-
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
-	depends on BUSYBOX_CONFIG_MOUNT
-	bool "Support /etc/fstab and -a"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
-	help
-	  Support mount all and looking for files in /etc/fstab.
-
 config BUSYBOX_CONFIG_PIVOT_ROOT
 	bool "pivot_root"
 	default BUSYBOX_DEFAULT_PIVOT_ROOT