diff options
author | Gabor Juhos <juhosg@openwrt.org> | 2012-12-22 12:12:50 +0000 |
---|---|---|
committer | Gabor Juhos <juhosg@openwrt.org> | 2012-12-22 12:12:50 +0000 |
commit | 378c626d6260c876063cb3343d480eae80286551 (patch) | |
tree | 289b55689c71093719b6f4daf4da76ded1c5003f | |
parent | 6010f1b825faa68d868bb090ed8bbecb897ea57d (diff) | |
download | master-187ad058-378c626d6260c876063cb3343d480eae80286551.tar.gz master-187ad058-378c626d6260c876063cb3343d480eae80286551.tar.bz2 master-187ad058-378c626d6260c876063cb3343d480eae80286551.zip |
ar71xx: register the second ethernet interface on the AP136
Also fix the default network configuration
according to the new setup.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34854 3c298f89-4303-0410-b956-a3cf2f4a3e73
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/uci-defaults/network | 7 | ||||
-rw-r--r-- | target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch | 25 |
2 files changed, 27 insertions, 5 deletions
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network index 7832da59b5..d6b60650c7 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network @@ -22,6 +22,13 @@ ubnt-unifi-outdoor) ucidef_set_interface_lan "eth0 eth1" ;; +ap136) + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4" + ucidef_add_switch_vlan "switch0" "2" "5 6" + ;; + db120 |\ rb-2011l | \ rb-2011uas-2hnd) diff --git a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch index 8325cdbb8f..58cd680ce4 100644 --- a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch +++ b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch @@ -56,7 +56,7 @@ static struct gpio_led ap136_leds_gpio[] __initdata = { { -@@ -98,63 +104,91 @@ static struct gpio_keys_button ap136_gpi +@@ -98,63 +104,106 @@ static struct gpio_keys_button ap136_gpi }, }; @@ -99,7 +99,14 @@ + .duplex = 1, + .txpause = 1, + .rxpause = 1, -+ } ++ }, ++ .port6_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, }; -#ifdef CONFIG_PCI @@ -132,11 +139,11 @@ + + t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); + t |= QCA955X_ETH_CFG_RGMII_EN; ++ ++ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); - ath79_register_pci(); -+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); -+ + iounmap(base); } -#else @@ -172,13 +179,21 @@ + mdiobus_register_board_info(ap136_mdio0_info, + ARRAY_SIZE(ap136_mdio0_info)); + -+ /* GMAC0 is connected to an AR8327 switch */ ++ /* GMAC0 is connected to GMAC0 of the AR8327 switch via RGMII */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0xa6000000; + + ath79_register_eth(0); ++ ++ /* GMAC1 is connected to GMAC6 of the AR8327 switch via SGMII */ ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ath79_eth1_pll_data.pll_1000 = 0x03000101; ++ ++ ath79_register_eth(1); } MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board", |