diff options
Diffstat (limited to 'drivers/mtd/nand/gpmi-nand/gpmi-regs.h')
| -rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-regs.h | 327 |
1 files changed, 327 insertions, 0 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h new file mode 100644 index 00000000..a281716d --- /dev/null +++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h @@ -0,0 +1,327 @@ +/* + * Freescale GPMI NAND Flash Driver + * + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Copyright 2008 Embedded Alley Solutions, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __GPMI_NAND_GPMI_REGS_H +#define __GPMI_NAND_GPMI_REGS_H + +#define HW_GPMI_CTRL0 0x00000000 +#define HW_GPMI_CTRL0_SET 0x00000004 +#define HW_GPMI_CTRL0_CLR 0x00000008 +#define HW_GPMI_CTRL0_TOG 0x0000000c + +#define BP_GPMI_CTRL0_COMMAND_MODE 24 +#define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE) +#define BF_GPMI_CTRL0_COMMAND_MODE(v) \ + (((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE) +#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2 +#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3 + +#define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23) +#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0 +#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1 + +/* + * Difference in LOCK_CS between imx23 and imx28 : + * This bit may impact the _POWER_ consumption. So some chips + * do not set it. + */ +#define MX23_BP_GPMI_CTRL0_LOCK_CS 22 +#define MX28_BP_GPMI_CTRL0_LOCK_CS 27 +#define LOCK_CS_ENABLE 0x1 +#define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0 + +/* Difference in CS between imx23 and imx28 */ +#define BP_GPMI_CTRL0_CS 20 +#define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS) +#define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS) +#define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \ + (GPMI_IS_MX23((x)) \ + ? MX23_BM_GPMI_CTRL0_CS \ + : MX28_BM_GPMI_CTRL0_CS)) + +#define BP_GPMI_CTRL0_ADDRESS 17 +#define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS) +#define BF_GPMI_CTRL0_ADDRESS(v) \ + (((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS) +#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0 +#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1 +#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2 + +#define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16) +#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0 +#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1 + +#define BP_GPMI_CTRL0_XFER_COUNT 0 +#define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT) +#define BF_GPMI_CTRL0_XFER_COUNT(v) \ + (((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT) + +#define HW_GPMI_COMPARE 0x00000010 + +#define HW_GPMI_ECCCTRL 0x00000020 +#define HW_GPMI_ECCCTRL_SET 0x00000024 +#define HW_GPMI_ECCCTRL_CLR 0x00000028 +#define HW_GPMI_ECCCTRL_TOG 0x0000002c + +#define BP_GPMI_ECCCTRL_ECC_CMD 13 +#define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD) +#define BF_GPMI_ECCCTRL_ECC_CMD(v) \ + (((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD) +#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0 +#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1 + +#define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12) +#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1 +#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0 + +#define BP_GPMI_ECCCTRL_BUFFER_MASK 0 +#define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK) +#define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \ + (((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK) +#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100 +#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF + +#define HW_GPMI_ECCCOUNT 0x00000030 +#define HW_GPMI_PAYLOAD 0x00000040 +#define HW_GPMI_AUXILIARY 0x00000050 +#define HW_GPMI_CTRL1 0x00000060 +#define HW_GPMI_CTRL1_SET 0x00000064 +#define HW_GPMI_CTRL1_CLR 0x00000068 +#define HW_GPMI_CTRL1_TOG 0x0000006c + +#define BM_GPMI_CTRL1_DEV_CLK_STOP 0x80000000 +#define BM_GPMI_CTRL1_SSYNC_CLK_STOP 0x40000000 +#define BM_GPMI_CTRL1_WRITE_CLK_STOP 0x20000000 +#define BM_GPMI_CTRL1_TOGGLE_MODE 0x10000000 +#define BM_GPMI_CTRL1_GPMI_CLK_DIV2_EN 0x08000000 +#define BM_GPMI_CTRL1_UPDATE_CS 0x04000000 +#define BM_GPMI_CTRL1_SSYNCMODE 0x02000000 +#define BV_GPMI_CTRL1_SSYNCMODE__ASYNC 0x0 +#define BV_GPMI_CTRL1_SSYNCMODE__SSYNC 0x1 +#define BM_GPMI_CTRL1_DECOUPLE_CS 0x01000000 +#define BP_GPMI_CTRL1_WRN_DLY_SEL 22 +#define BM_GPMI_CTRL1_WRN_DLY_SEL 0x00C00000 +#define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ + (((v) << 22) & BM_GPMI_CTRL1_WRN_DLY_SEL) +#define BM_GPMI_CTRL1_RSVD1 0x00200000 +#define BM_GPMI_CTRL1_TIMEOUT_IRQ_EN 0x00100000 +#define BM_GPMI_CTRL1_GANGED_RDYBUSY 0x00080000 +#define BM_GPMI_CTRL1_BCH_MODE 0x00040000 +#define BM_GPMI_CTRL1_DLL_ENABLE 0x00020000 +#define BP_GPMI_CTRL1_HALF_PERIOD 16 +#define BM_GPMI_CTRL1_HALF_PERIOD 0x00010000 +#define BP_GPMI_CTRL1_RDN_DELAY 12 +#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000 +#define BF_GPMI_CTRL1_RDN_DELAY(v) \ + (((v) << 12) & BM_GPMI_CTRL1_RDN_DELAY) +#define BM_GPMI_CTRL1_DMA2ECC_MODE 0x00000800 +#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400 +#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200 +#define BM_GPMI_CTRL1_BURST_EN 0x00000100 +#define BM_GPMI_CTRL1_ABORT_WAIT_REQUEST 0x00000080 +#define BP_GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL 4 +#define BM_GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL 0x00000070 +#define BF_GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL(v) \ + (((v) << 4) & BM_GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL) +#define BM_GPMI_CTRL1_DEV_RESET 0x00000008 +#define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0 +#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1 +#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004 +#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0 +#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1 +#define BM_GPMI_CTRL1_CAMERA_MODE 0x00000002 +#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001 +#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0 +#define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1 + +#define HW_GPMI_TIMING0 0x00000070 + +#define BP_GPMI_TIMING0_ADDRESS_SETUP 16 +#define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP) +#define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \ + (((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP) + +#define BP_GPMI_TIMING0_DATA_HOLD 8 +#define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD) +#define BF_GPMI_TIMING0_DATA_HOLD(v) \ + (((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD) + +#define BP_GPMI_TIMING0_DATA_SETUP 0 +#define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP) +#define BF_GPMI_TIMING0_DATA_SETUP(v) \ + (((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP) + +#define HW_GPMI_TIMING1 0x00000080 +#define BP_GPMI_TIMING1_BUSY_TIMEOUT 16 +#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000 +#define BF_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT(v) \ + (((v) << 16) & BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT) + +#define HW_GPMI_TIMING2 0x00000090 + +#define BP_GPMI_TIMING2_RSVD1 27 +#define BM_GPMI_TIMING2_RSVD1 0xF8000000 +#define BF_GPMI_TIMING2_RSVD1(v) \ + (((v) << 27) & BM_GPMI_TIMING2_RSVD1) +#define BP_GPMI_TIMING2_READ_LATENCY 24 +#define BM_GPMI_TIMING2_READ_LATENCY 0x07000000 +#define BF_GPMI_TIMING2_READ_LATENCY(v) \ + (((v) << 24) & BM_GPMI_TIMING2_READ_LATENCY) +#define BP_GPMI_TIMING2_RSVD0 21 +#define BM_GPMI_TIMING2_RSVD0 0x00E00000 +#define BF_GPMI_TIMING2_RSVD0(v) \ + (((v) << 21) & BM_GPMI_TIMING2_RSVD0) +#define BP_GPMI_TIMING2_CE_DELAY 16 +#define BM_GPMI_TIMING2_CE_DELAY 0x001F0000 +#define BF_GPMI_TIMING2_CE_DELAY(v) \ + (((v) << 16) & BM_GPMI_TIMING2_CE_DELAY) +#define BP_GPMI_TIMING2_PREAMBLE_DELAY 12 +#define BM_GPMI_TIMING2_PREAMBLE_DELAY 0x0000F000 +#define BF_GPMI_TIMING2_PREAMBLE_DELAY(v) \ + (((v) << 12) & BM_GPMI_TIMING2_PREAMBLE_DELAY) +#define BP_GPMI_TIMING2_POSTAMBLE_DELAY 8 +#define BM_GPMI_TIMING2_POSTAMBLE_DELAY 0x00000F00 +#define BF_GPMI_TIMING2_POSTAMBLE_DELAY(v) \ + (((v) << 8) & BM_GPMI_TIMING2_POSTAMBLE_DELAY) +#define BP_GPMI_TIMING2_CMDADD_PAUSE 4 +#define BM_GPMI_TIMING2_CMDADD_PAUSE 0x000000F0 +#define BF_GPMI_TIMING2_CMDADD_PAUSE(v) \ + (((v) << 4) & BM_GPMI_TIMING2_CMDADD_PAUSE) +#define BP_GPMI_TIMING2_DATA_PAUSE 0 +#define BM_GPMI_TIMING2_DATA_PAUSE 0x0000000F +#define BF_GPMI_TIMING2_DATA_PAUSE(v) \ + (((v) << 0) & BM_GPMI_TIMING2_DATA_PAUSE) + +#define HW_GPMI_DATA 0x000000a0 + +/* MX28 uses this to detect READY. */ +#define HW_GPMI_STAT 0x000000b0 +#define MX28_BP_GPMI_STAT_READY_BUSY 24 +#define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY) +#define MX28_BF_GPMI_STAT_READY_BUSY(v) \ + (((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY) + +/* MX23 uses this to detect READY. */ +#define HW_GPMI_DEBUG 0x000000c0 +#define MX23_BP_GPMI_DEBUG_READY0 28 +#define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0) + +#define HW_GPMI_READ_DDR_DLL_CTRL (0x00000100) + +#define BP_GPMI_READ_DDR_DLL_CTRL_REF_UPDATE_INT 28 +#define BM_GPMI_READ_DDR_DLL_CTRL_REF_UPDATE_INT 0xF0000000 +#define BF_GPMI_READ_DDR_DLL_CTRL_REF_UPDATE_INT(v) \ + (((v) << 28) & BM_GPMI_READ_DDR_DLL_CTRL_REF_UPDATE_INT) +#define BP_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT 20 +#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT 0x0FF00000 +#define BF_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT(v) \ + (((v) << 20) & BM_GPMI_READ_DDR_DLL_CTRL_SLV_UPDATE_INT) +#define BP_GPMI_READ_DDR_DLL_CTRL_RSVD1 18 +#define BM_GPMI_READ_DDR_DLL_CTRL_RSVD1 0x000C0000 +#define BF_GPMI_READ_DDR_DLL_CTRL_RSVD1(v) \ + (((v) << 18) & BM_GPMI_READ_DDR_DLL_CTRL_RSVD1) +#define BP_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE_VAL 10 +#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE_VAL 0x0003FC00 +#define BF_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE_VAL(v) \ + (((v) << 10) & BM_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE_VAL) +#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_OVERRIDE 0x00000200 +#define BM_GPMI_READ_DDR_DLL_CTRL_REFCLK_ON 0x00000100 +#define BM_GPMI_READ_DDR_DLL_CTRL_GATE_UPDATE 0x00000080 +#define BP_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET 3 +#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET 0x00000078 +#define BF_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET(v) \ + (((v) << 3) & BM_GPMI_READ_DDR_DLL_CTRL_SLV_DLY_TARGET) +#define BM_GPMI_READ_DDR_DLL_CTRL_SLV_FORCE_UPD 0x00000004 +#define BM_GPMI_READ_DDR_DLL_CTRL_RESET 0x00000002 +#define BM_GPMI_READ_DDR_DLL_CTRL_ENABLE 0x00000001 + +#define HW_GPMI_WRITE_DDR_DLL_CTRL (0x00000110) + +#define BP_GPMI_WRITE_DDR_DLL_CTRL_REF_UPDATE_INT 28 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_REF_UPDATE_INT 0xF0000000 +#define BF_GPMI_WRITE_DDR_DLL_CTRL_REF_UPDATE_INT(v) \ + (((v) << 28) & BM_GPMI_WRITE_DDR_DLL_CTRL_REF_UPDATE_INT) +#define BP_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT 20 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT 0x0FF00000 +#define BF_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT(v) \ + (((v) << 20) & BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_UPDATE_INT) +#define BP_GPMI_WRITE_DDR_DLL_CTRL_RSVD1 18 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_RSVD1 0x000C0000 +#define BF_GPMI_WRITE_DDR_DLL_CTRL_RSVD1(v) \ + (((v) << 18) & BM_GPMI_WRITE_DDR_DLL_CTRL_RSVD1) +#define BP_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE_VAL 10 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE_VAL 0x0003FC00 +#define BF_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE_VAL(v) \ + (((v) << 10) & BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE_VAL) +#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_OVERRIDE 0x00000200 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_REFCLK_ON 0x00000100 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_GATE_UPDATE 0x00000080 +#define BP_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET 3 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET 0x00000078 +#define BF_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET(v) \ + (((v) << 3) & BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_DLY_TARGET) +#define BM_GPMI_WRITE_DDR_DLL_CTRL_SLV_FORCE_UPD 0x00000004 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_RESET 0x00000002 +#define BM_GPMI_WRITE_DDR_DLL_CTRL_ENABLE 0x00000001 + +#define HW_GPMI_READ_DDR_DLL_STS (0x00000120) + +#define BP_GPMI_READ_DDR_DLL_STS_RSVD1 25 +#define BM_GPMI_READ_DDR_DLL_STS_RSVD1 0xFE000000 +#define BF_GPMI_READ_DDR_DLL_STS_RSVD1(v) \ + (((v) << 25) & BM_GPMI_READ_DDR_DLL_STS_RSVD1) +#define BP_GPMI_READ_DDR_DLL_STS_REF_SEL 17 +#define BM_GPMI_READ_DDR_DLL_STS_REF_SEL 0x01FE0000 +#define BF_GPMI_READ_DDR_DLL_STS_REF_SEL(v) \ + (((v) << 17) & BM_GPMI_READ_DDR_DLL_STS_REF_SEL) +#define BM_GPMI_READ_DDR_DLL_STS_REF_LOCK 0x00010000 +#define BP_GPMI_READ_DDR_DLL_STS_RSVD0 9 +#define BM_GPMI_READ_DDR_DLL_STS_RSVD0 0x0000FE00 +#define BF_GPMI_READ_DDR_DLL_STS_RSVD0(v) \ + (((v) << 9) & BM_GPMI_READ_DDR_DLL_STS_RSVD0) +#define BP_GPMI_READ_DDR_DLL_STS_SLV_SEL 1 +#define BM_GPMI_READ_DDR_DLL_STS_SLV_SEL 0x000001FE +#define BF_GPMI_READ_DDR_DLL_STS_SLV_SEL(v) \ + (((v) << 1) & BM_GPMI_READ_DDR_DLL_STS_SLV_SEL) +#define BM_GPMI_READ_DDR_DLL_STS_SLV_LOCK 0x00000001 + +#define HW_GPMI_WRITE_DDR_DLL_STS (0x00000130) + +#define BP_GPMI_WRITE_DDR_DLL_STS_RSVD1 25 +#define BM_GPMI_WRITE_DDR_DLL_STS_RSVD1 0xFE000000 +#define BF_GPMI_WRITE_DDR_DLL_STS_RSVD1(v) \ + (((v) << 25) & BM_GPMI_WRITE_DDR_DLL_STS_RSVD1) +#define BP_GPMI_WRITE_DDR_DLL_STS_REF_SEL 17 +#define BM_GPMI_WRITE_DDR_DLL_STS_REF_SEL 0x01FE0000 +#define BF_GPMI_WRITE_DDR_DLL_STS_REF_SEL(v) \ + (((v) << 17) & BM_GPMI_WRITE_DDR_DLL_STS_REF_SEL) +#define BM_GPMI_WRITE_DDR_DLL_STS_REF_LOCK 0x00010000 +#define BP_GPMI_WRITE_DDR_DLL_STS_RSVD0 9 +#define BM_GPMI_WRITE_DDR_DLL_STS_RSVD0 0x0000FE00 +#define BF_GPMI_WRITE_DDR_DLL_STS_RSVD0(v) \ + (((v) << 9) & BM_GPMI_WRITE_DDR_DLL_STS_RSVD0) +#define BP_GPMI_WRITE_DDR_DLL_STS_SLV_SEL 1 +#define BM_GPMI_WRITE_DDR_DLL_STS_SLV_SEL 0x000001FE +#define BF_GPMI_WRITE_DDR_DLL_STS_SLV_SEL(v) \ + (((v) << 1) & BM_GPMI_WRITE_DDR_DLL_STS_SLV_SEL) +#define BM_GPMI_WRITE_DDR_DLL_STS_SLV_LOCK 0x00000001 +#endif |