fishHEADmaster

1 files changed, 1291 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
new file mode 100644
index 0000000..29412cc
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -0,0 +1,1291 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <acpi/button.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+#include "intel_drv.h"
+#include <drm/i915_drm.h>
+#include "i915_drv.h"
+#include <linux/acpi.h>
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_connector {
+	struct intel_connector base;
+
+	struct notifier_block lid_notifier;
+};
+
+struct intel_lvds_encoder {
+	struct intel_encoder base;
+
+	u32 pfit_control;
+	u32 pfit_pgm_ratios;
+	bool is_dual_link;
+	u32 reg;
+
+	struct intel_lvds_connector *attached_connector;
+};
+
+static struct intel_lvds_encoder *to_lvds_encoder(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct intel_lvds_encoder, base.base);
+}
+
+static struct intel_lvds_connector *to_lvds_connector(struct drm_connector *connector)
+{
+	return container_of(connector, struct intel_lvds_connector, base.base);
+}
+
+static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
+				    enum pipe *pipe)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	u32 tmp;
+
+	tmp = I915_READ(lvds_encoder->reg);
+
+	if (!(tmp & LVDS_PORT_EN))
+		return false;
+
+	if (HAS_PCH_CPT(dev))
+		*pipe = PORT_TO_PIPE_CPT(tmp);
+	else
+		*pipe = PORT_TO_PIPE(tmp);
+
+	return true;
+}
+
+/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
+{
+	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct drm_display_mode *fixed_mode =
+		lvds_encoder->attached_connector->base.panel.fixed_mode;
+	int pipe = intel_crtc->pipe;
+	u32 temp;
+
+	temp = I915_READ(lvds_encoder->reg);
+	temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~PORT_TRANS_SEL_MASK;
+		temp |= PORT_TRANS_SEL_CPT(pipe);
+	} else {
+		if (pipe == 1) {
+			temp |= LVDS_PIPEB_SELECT;
+		} else {
+			temp &= ~LVDS_PIPEB_SELECT;
+		}
+	}
+
+	/* set the corresponsding LVDS_BORDER bit */
+	temp |= dev_priv->lvds_border_bits;
+	/* Set the B0-B3 data pairs corresponding to whether we're going to
+	 * set the DPLLs for dual-channel mode or not.
+	 */
+	if (lvds_encoder->is_dual_link)
+		temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+	else
+		temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+	 * appropriately here, but we need to look more thoroughly into how
+	 * panels behave in the two modes.
+	 */
+
+	/* Set the dithering flag on LVDS as needed, note that there is no
+	 * special lvds dither control bit on pch-split platforms, dithering is
+	 * only controlled through the PIPECONF reg. */
+	if (INTEL_INFO(dev)->gen == 4) {
+		if (dev_priv->lvds_dither)
+			temp |= LVDS_ENABLE_DITHER;
+		else
+			temp &= ~LVDS_ENABLE_DITHER;
+	}
+	temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+	if (fixed_mode->flags & DRM_MODE_FLAG_NHSYNC)
+		temp |= LVDS_HSYNC_POLARITY;
+	if (fixed_mode->flags & DRM_MODE_FLAG_NVSYNC)
+		temp |= LVDS_VSYNC_POLARITY;
+
+	I915_WRITE(lvds_encoder->reg, temp);
+}
+
+static void intel_pre_enable_lvds(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct intel_lvds_encoder *enc = to_lvds_encoder(&encoder->base);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (HAS_PCH_SPLIT(dev) || !enc->pfit_control)
+		return;
+
+	/*
+	 * Enable automatic panel scaling so that non-native modes
+	 * fill the screen.  The panel fitter should only be
+	 * adjusted whilst the pipe is disabled, according to
+	 * register description and PRM.
+	 */
+	DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+		      enc->pfit_control,
+		      enc->pfit_pgm_ratios);
+
+	I915_WRITE(PFIT_PGM_RATIOS, enc->pfit_pgm_ratios);
+	I915_WRITE(PFIT_CONTROL, enc->pfit_control);
+}
+
+/**
+ * Sets the power state for the panel.
+ */
+static void intel_enable_lvds(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 ctl_reg, stat_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		ctl_reg = PCH_PP_CONTROL;
+		stat_reg = PCH_PP_STATUS;
+	} else {
+		ctl_reg = PP_CONTROL;
+		stat_reg = PP_STATUS;
+	}
+
+	I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN);
+
+	I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+	POSTING_READ(lvds_encoder->reg);
+	if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
+		DRM_ERROR("timed out waiting for panel to power on\n");
+
+	intel_panel_enable_backlight(dev, intel_crtc->pipe);
+}
+
+static void intel_disable_lvds(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 ctl_reg, stat_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		ctl_reg = PCH_PP_CONTROL;
+		stat_reg = PCH_PP_STATUS;
+	} else {
+		ctl_reg = PP_CONTROL;
+		stat_reg = PP_STATUS;
+	}
+
+	intel_panel_disable_backlight(dev);
+
+	I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+	if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000))
+		DRM_ERROR("timed out waiting for panel to power off\n");
+
+	I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN);
+	POSTING_READ(lvds_encoder->reg);
+}
+
+static int intel_lvds_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+	struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
+
+	if (mode->hdisplay > fixed_mode->hdisplay)
+		return MODE_PANEL;
+	if (mode->vdisplay > fixed_mode->vdisplay)
+		return MODE_PANEL;
+
+	return MODE_OK;
+}
+
+static void
+centre_horizontally(struct drm_display_mode *mode,
+		    int width)
+{
+	u32 border, sync_pos, blank_width, sync_width;
+
+	/* keep the hsync and hblank widths constant */
+	sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
+	sync_pos = (blank_width - sync_width + 1) / 2;
+
+	border = (mode->hdisplay - width + 1) / 2;
+	border += border & 1; /* make the border even */
+
+	mode->crtc_hdisplay = width;
+	mode->crtc_hblank_start = width + border;
+	mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
+
+	mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
+	mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
+}
+
+static void
+centre_vertically(struct drm_display_mode *mode,
+		  int height)
+{
+	u32 border, sync_pos, blank_width, sync_width;
+
+	/* keep the vsync and vblank widths constant */
+	sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
+	sync_pos = (blank_width - sync_width + 1) / 2;
+
+	border = (mode->vdisplay - height + 1) / 2;
+
+	mode->crtc_vdisplay = height;
+	mode->crtc_vblank_start = height + border;
+	mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
+
+	mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
+	mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
+}
+
+static inline u32 panel_fitter_scaling(u32 source, u32 target)
+{
+	/*
+	 * Floating point operation is not supported. So the FACTOR
+	 * is defined, which can avoid the floating point computation
+	 * when calculating the panel ratio.
+	 */
+#define ACCURACY 12
+#define FACTOR (1 << ACCURACY)
+	u32 ratio = source * FACTOR / target;
+	return (FACTOR * ratio + FACTOR/2) / FACTOR;
+}
+
+static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
+				      struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = intel_encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_lvds_encoder *lvds_encoder =
+		to_lvds_encoder(&intel_encoder->base);
+	struct intel_connector *intel_connector =
+		&lvds_encoder->attached_connector->base;
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+	struct drm_display_mode *mode = &pipe_config->requested_mode;
+	struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
+	u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
+	unsigned int lvds_bpp;
+	int pipe;
+
+	/* Should never happen!! */
+	if (INTEL_INFO(dev)->gen < 4 && intel_crtc->pipe == 0) {
+		DRM_ERROR("Can't support LVDS on pipe A\n");
+		return false;
+	}
+
+	if (intel_encoder_check_is_cloned(&lvds_encoder->base))
+		return false;
+
+	if ((I915_READ(lvds_encoder->reg) & LVDS_A3_POWER_MASK) ==
+	    LVDS_A3_POWER_UP)
+		lvds_bpp = 8*3;
+	else
+		lvds_bpp = 6*3;
+
+	if (lvds_bpp != pipe_config->pipe_bpp) {
+		DRM_DEBUG_KMS("forcing display bpp (was %d) to LVDS (%d)\n",
+			      pipe_config->pipe_bpp, lvds_bpp);
+		pipe_config->pipe_bpp = lvds_bpp;
+	}
+	/*
+	 * We have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
+			       adjusted_mode);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		pipe_config->has_pch_encoder = true;
+
+		intel_pch_panel_fitting(dev,
+					intel_connector->panel.fitting_mode,
+					mode, adjusted_mode);
+		return true;
+	}
+
+	/* Native modes don't need fitting */
+	if (adjusted_mode->hdisplay == mode->hdisplay &&
+	    adjusted_mode->vdisplay == mode->vdisplay)
+		goto out;
+
+	/* 965+ wants fuzzy fitting */
+	if (INTEL_INFO(dev)->gen >= 4)
+		pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+				 PFIT_FILTER_FUZZY);
+
+	/*
+	 * Enable automatic panel scaling for non-native modes so that they fill
+	 * the screen.  Should be enabled before the pipe is enabled, according
+	 * to register description and PRM.
+	 * Change the value here to see the borders for debugging
+	 */
+	for_each_pipe(pipe)
+		I915_WRITE(BCLRPAT(pipe), 0);
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+	pipe_config->timings_set = true;
+
+	switch (intel_connector->panel.fitting_mode) {
+	case DRM_MODE_SCALE_CENTER:
+		/*
+		 * For centered modes, we have to calculate border widths &
+		 * heights and modify the values programmed into the CRTC.
+		 */
+		centre_horizontally(adjusted_mode, mode->hdisplay);
+		centre_vertically(adjusted_mode, mode->vdisplay);
+		border = LVDS_BORDER_ENABLE;
+		break;
+
+	case DRM_MODE_SCALE_ASPECT:
+		/* Scale but preserve the aspect ratio */
+		if (INTEL_INFO(dev)->gen >= 4) {
+			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
+			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
+
+			/* 965+ is easy, it does everything in hw */
+			if (scaled_width > scaled_height)
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR;
+			else if (scaled_width < scaled_height)
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER;
+			else if (adjusted_mode->hdisplay != mode->hdisplay)
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
+		} else {
+			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
+			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
+			/*
+			 * For earlier chips we have to calculate the scaling
+			 * ratio by hand and program it into the
+			 * PFIT_PGM_RATIO register
+			 */
+			if (scaled_width > scaled_height) { /* pillar */
+				centre_horizontally(adjusted_mode, scaled_height / mode->vdisplay);
+
+				border = LVDS_BORDER_ENABLE;
+				if (mode->vdisplay != adjusted_mode->vdisplay) {
+					u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
+					pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
+							    bits << PFIT_VERT_SCALE_SHIFT);
+					pfit_control |= (PFIT_ENABLE |
+							 VERT_INTERP_BILINEAR |
+							 HORIZ_INTERP_BILINEAR);
+				}
+			} else if (scaled_width < scaled_height) { /* letter */
+				centre_vertically(adjusted_mode, scaled_width / mode->hdisplay);
+
+				border = LVDS_BORDER_ENABLE;
+				if (mode->hdisplay != adjusted_mode->hdisplay) {
+					u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
+					pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
+							    bits << PFIT_VERT_SCALE_SHIFT);
+					pfit_control |= (PFIT_ENABLE |
+							 VERT_INTERP_BILINEAR |
+							 HORIZ_INTERP_BILINEAR);
+				}
+			} else
+				/* Aspects match, Let hw scale both directions */
+				pfit_control |= (PFIT_ENABLE |
+						 VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+		}
+		break;
+
+	case DRM_MODE_SCALE_FULLSCREEN:
+		/*
+		 * Full scaling, even if it changes the aspect ratio.
+		 * Fortunately this is all done for us in hw.
+		 */
+		if (mode->vdisplay != adjusted_mode->vdisplay ||
+		    mode->hdisplay != adjusted_mode->hdisplay) {
+			pfit_control |= PFIT_ENABLE;
+			if (INTEL_INFO(dev)->gen >= 4)
+				pfit_control |= PFIT_SCALING_AUTO;
+			else
+				pfit_control |= (VERT_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_AUTO_SCALE |
+						 HORIZ_INTERP_BILINEAR);
+		}
+		break;
+
+	default:
+		break;
+	}
+
+out:
+	/* If not enabling scaling, be consistent and always use 0. */
+	if ((pfit_control & PFIT_ENABLE) == 0) {
+		pfit_control = 0;
+		pfit_pgm_ratios = 0;
+	}
+
+	/* Make sure pre-965 set dither correctly */
+	if (INTEL_INFO(dev)->gen < 4 && dev_priv->lvds_dither)
+		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
+	if (pfit_control != lvds_encoder->pfit_control ||
+	    pfit_pgm_ratios != lvds_encoder->pfit_pgm_ratios) {
+		lvds_encoder->pfit_control = pfit_control;
+		lvds_encoder->pfit_pgm_ratios = pfit_pgm_ratios;
+	}
+	dev_priv->lvds_border_bits = border;
+
+	/*
+	 * XXX: It would be nice to support lower refresh rates on the
+	 * panels to reduce power consumption, and perhaps match the
+	 * user's requested refresh rate.
+	 */
+
+	return true;
+}
+
+static void intel_lvds_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+}
+
+/**
+ * Detect the LVDS connection.
+ *
+ * Since LVDS doesn't have hotlug, we use the lid as a proxy.  Open means
+ * connected and closed means disconnected.  We also send hotplug events as
+ * needed, using lid status notification from the input layer.
+ */
+static enum drm_connector_status
+intel_lvds_detect(struct drm_connector *connector, bool force)
+{
+	struct drm_device *dev = connector->dev;
+	enum drm_connector_status status;
+
+	status = intel_panel_detect(dev);
+	if (status != connector_status_unknown)
+		return status;
+
+	return connector_status_connected;
+}
+
+/**
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int intel_lvds_get_modes(struct drm_connector *connector)
+{
+	struct intel_lvds_connector *lvds_connector = to_lvds_connector(connector);
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode;
+
+	/* use cached edid if we have one */
+	if (!IS_ERR_OR_NULL(lvds_connector->base.edid))
+		return drm_add_edid_modes(connector, lvds_connector->base.edid);
+
+	mode = drm_mode_duplicate(dev, lvds_connector->base.panel.fixed_mode);
+	if (mode == NULL)
+		return 0;
+
+	drm_mode_probed_add(connector, mode);
+	return 1;
+}
+
+static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_INFO("Skipping forced modeset for %s\n", id->ident);
+	return 1;
+}
+
+/* The GPU hangs up on these systems if modeset is performed on LID open */
+static const struct dmi_system_id intel_no_modeset_on_lid[] = {
+	{
+		.callback = intel_no_modeset_on_lid_dmi_callback,
+		.ident = "Toshiba Tecra A11",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
+		},
+	},
+
+	{ }	/* terminating entry */
+};
+
+/*
+ * Lid events. Note the use of 'modeset':
+ *  - we set it to MODESET_ON_LID_OPEN on lid close,
+ *    and set it to MODESET_DONE on open
+ *  - we use it as a "only once" bit (ie we ignore
+ *    duplicate events where it was already properly set)
+ *  - the suspend/resume paths will set it to
+ *    MODESET_SUSPENDED and ignore the lid open event,
+ *    because they restore the mode ("lid open").
+ */
+static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
+			    void *unused)
+{
+	struct intel_lvds_connector *lvds_connector =
+		container_of(nb, struct intel_lvds_connector, lid_notifier);
+	struct drm_connector *connector = &lvds_connector->base.base;
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
+		return NOTIFY_OK;
+
+	mutex_lock(&dev_priv->modeset_restore_lock);
+	if (dev_priv->modeset_restore == MODESET_SUSPENDED)
+		goto exit;
+	/*
+	 * check and update the status of LVDS connector after receiving
+	 * the LID nofication event.
+	 */
+	connector->status = connector->funcs->detect(connector, false);
+
+	/* Don't force modeset on machines where it causes a GPU lockup */
+	if (dmi_check_system(intel_no_modeset_on_lid))
+		goto exit;
+	if (!acpi_lid_open()) {
+		/* do modeset on next lid open event */
+		dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
+		goto exit;
+	}
+
+	if (dev_priv->modeset_restore == MODESET_DONE)
+		goto exit;
+
+	drm_modeset_lock_all(dev);
+	intel_modeset_setup_hw_state(dev, true);
+	drm_modeset_unlock_all(dev);
+
+	dev_priv->modeset_restore = MODESET_DONE;
+
+exit:
+	mutex_unlock(&dev_priv->modeset_restore_lock);
+	return NOTIFY_OK;
+}
+
+/**
+ * intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+static void intel_lvds_destroy(struct drm_connector *connector)
+{
+	struct intel_lvds_connector *lvds_connector =
+		to_lvds_connector(connector);
+
+	if (lvds_connector->lid_notifier.notifier_call)
+		acpi_lid_notifier_unregister(&lvds_connector->lid_notifier);
+
+	if (!IS_ERR_OR_NULL(lvds_connector->base.edid))
+		kfree(lvds_connector->base.edid);
+
+	intel_panel_fini(&lvds_connector->base.panel);
+
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int intel_lvds_set_property(struct drm_connector *connector,
+				   struct drm_property *property,
+				   uint64_t value)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+	struct drm_device *dev = connector->dev;
+
+	if (property == dev->mode_config.scaling_mode_property) {
+		struct drm_crtc *crtc;
+
+		if (value == DRM_MODE_SCALE_NONE) {
+			DRM_DEBUG_KMS("no scaling not supported\n");
+			return -EINVAL;
+		}
+
+		if (intel_connector->panel.fitting_mode == value) {
+			/* the LVDS scaling property is not changed */
+			return 0;
+		}
+		intel_connector->panel.fitting_mode = value;
+
+		crtc = intel_attached_encoder(connector)->base.crtc;
+		if (crtc && crtc->enabled) {
+			/*
+			 * If the CRTC is enabled, the display will be changed
+			 * according to the new panel fitting mode.
+			 */
+			intel_crtc_restore_mode(crtc);
+		}
+	}
+
+	return 0;
+}
+
+static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
+	.mode_set = intel_lvds_mode_set,
+};
+
+static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
+	.get_modes = intel_lvds_get_modes,
+	.mode_valid = intel_lvds_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+	.dpms = intel_connector_dpms,
+	.detect = intel_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = intel_lvds_set_property,
+	.destroy = intel_lvds_destroy,
+};
+
+static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_INFO("Skipping LVDS initialization for %s\n", id->ident);
+	return 1;
+}
+
+/* These systems claim to have LVDS, but really don't */
+static const struct dmi_system_id intel_no_lvds[] = {
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core 2 series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "MSI IM-945GSE-A",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Dell Studio Hybrid",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Dell OptiPlex FX170",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex FX170"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen Mini PC",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen Mini PC MP915",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen i915GMm-HFS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+                .ident = "AOpen i45GMx-I",
+                .matches = {
+                        DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+                        DMI_MATCH(DMI_BOARD_NAME, "i45GMx-I"),
+                },
+        },
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Aopen i945GTt-VFA",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Clientron U800",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
+		},
+	},
+	{
+                .callback = intel_no_lvds_dmi_callback,
+                .ident = "Clientron E830",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "E830"),
+                },
+        },
+        {
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Asus EeeBox PC EB1007",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Asus AT5NM10T-I",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Hewlett-Packard HP t5740",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, " t5740"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Hewlett-Packard t5745",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Hewlett-Packard st5747",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "MSI Wind Box DC500",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-7469"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Gigabyte GA-D525TUD",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
+			DMI_MATCH(DMI_BOARD_NAME, "D525TUD"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Supermicro X7SPA-H",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Fujitsu Esprimo Q900",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Q900"),
+		},
+	},
+
+	{ }	/* terminating entry */
+};
+
+/**
+ * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
+ * @dev: drm device
+ * @connector: LVDS connector
+ *
+ * Find the reduced downclock for LVDS in EDID.
+ */
+static void intel_find_lvds_downclock(struct drm_device *dev,
+				      struct drm_display_mode *fixed_mode,
+				      struct drm_connector *connector)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_display_mode *scan;
+	int temp_downclock;
+
+	temp_downclock = fixed_mode->clock;
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		/*
+		 * If one mode has the same resolution with the fixed_panel
+		 * mode while they have the different refresh rate, it means
+		 * that the reduced downclock is found for the LVDS. In such
+		 * case we can set the different FPx0/1 to dynamically select
+		 * between low and high frequency.
+		 */
+		if (scan->hdisplay == fixed_mode->hdisplay &&
+		    scan->hsync_start == fixed_mode->hsync_start &&
+		    scan->hsync_end == fixed_mode->hsync_end &&
+		    scan->htotal == fixed_mode->htotal &&
+		    scan->vdisplay == fixed_mode->vdisplay &&
+		    scan->vsync_start == fixed_mode->vsync_start &&
+		    scan->vsync_end == fixed_mode->vsync_end &&
+		    scan->vtotal == fixed_mode->vtotal) {
+			if (scan->clock < temp_downclock) {
+				/*
+				 * The downclock is already found. But we
+				 * expect to find the lower downclock.
+				 */
+				temp_downclock = scan->clock;
+			}
+		}
+	}
+	if (temp_downclock < fixed_mode->clock && i915_lvds_downclock) {
+		/* We found the downclock for LVDS. */
+		dev_priv->lvds_downclock_avail = 1;
+		dev_priv->lvds_downclock = temp_downclock;
+		DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
+			      "Normal clock %dKhz, downclock %dKhz\n",
+			      fixed_mode->clock, temp_downclock);
+	}
+}
+
+/*
+ * Enumerate the child dev array parsed from VBT to check whether
+ * the LVDS is present.
+ * If it is present, return 1.
+ * If it is not present, return false.
+ * If no child dev is parsed from VBT, it assumes that the LVDS is present.
+ */
+static bool lvds_is_present_in_vbt(struct drm_device *dev,
+				   u8 *i2c_pin)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	if (!dev_priv->child_dev_num)
+		return true;
+
+	for (i = 0; i < dev_priv->child_dev_num; i++) {
+		struct child_device_config *child = dev_priv->child_dev + i;
+
+		/* If the device type is not LFP, continue.
+		 * We have to check both the new identifiers as well as the
+		 * old for compatibility with some BIOSes.
+		 */
+		if (child->device_type != DEVICE_TYPE_INT_LFP &&
+		    child->device_type != DEVICE_TYPE_LFP)
+			continue;
+
+		if (intel_gmbus_is_port_valid(child->i2c_pin))
+			*i2c_pin = child->i2c_pin;
+
+		/* However, we cannot trust the BIOS writers to populate
+		 * the VBT correctly.  Since LVDS requires additional
+		 * information from AIM blocks, a non-zero addin offset is
+		 * a good indicator that the LVDS is actually present.
+		 */
+		if (child->addin_offset)
+			return true;
+
+		/* But even then some BIOS writers perform some black magic
+		 * and instantiate the device without reference to any
+		 * additional data.  Trust that if the VBT was written into
+		 * the OpRegion then they have validated the LVDS's existence.
+		 */
+		if (dev_priv->opregion.vbt)
+			return true;
+	}
+
+	return false;
+}
+
+static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
+{
+	DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
+	return 1;
+}
+
+static const struct dmi_system_id intel_dual_link_lvds[] = {
+	{
+		.callback = intel_dual_link_lvds_callback,
+		.ident = "Apple MacBook Pro (Core i5/i7 Series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
+		},
+	},
+	{ }	/* terminating entry */
+};
+
+bool intel_is_dual_link_lvds(struct drm_device *dev)
+{
+	struct intel_encoder *encoder;
+	struct intel_lvds_encoder *lvds_encoder;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+			    base.head) {
+		if (encoder->type == INTEL_OUTPUT_LVDS) {
+			lvds_encoder = to_lvds_encoder(&encoder->base);
+
+			return lvds_encoder->is_dual_link;
+		}
+	}
+
+	return false;
+}
+
+static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
+{
+	struct drm_device *dev = lvds_encoder->base.base.dev;
+	unsigned int val;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* use the module option value if specified */
+	if (i915_lvds_channel_mode > 0)
+		return i915_lvds_channel_mode == 2;
+
+	if (dmi_check_system(intel_dual_link_lvds))
+		return true;
+
+	/* BIOS should set the proper LVDS register value at boot, but
+	 * in reality, it doesn't set the value when the lid is closed;
+	 * we need to check "the value to be set" in VBT when LVDS
+	 * register is uninitialized.
+	 */
+	val = I915_READ(lvds_encoder->reg);
+	if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
+		val = dev_priv->bios_lvds_val;
+
+	return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
+}
+
+static bool intel_lvds_supported(struct drm_device *dev)
+{
+	/* With the introduction of the PCH we gained a dedicated
+	 * LVDS presence pin, use it. */
+	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
+		return true;
+
+	/* Otherwise LVDS was only attached to mobile products,
+	 * except for the inglorious 830gm */
+	if (INTEL_INFO(dev)->gen <= 4 && IS_MOBILE(dev) && !IS_I830(dev))
+		return true;
+
+	return false;
+}
+
+/**
+ * intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+bool intel_lvds_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_lvds_encoder *lvds_encoder;
+	struct intel_encoder *intel_encoder;
+	struct intel_lvds_connector *lvds_connector;
+	struct intel_connector *intel_connector;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *scan; /* *modes, *bios_mode; */
+	struct drm_display_mode *fixed_mode = NULL;
+	struct edid *edid;
+	struct drm_crtc *crtc;
+	u32 lvds;
+	int pipe;
+	u8 pin;
+
+	if (!intel_lvds_supported(dev))
+		return false;
+
+	/* Skip init on machines we know falsely report LVDS */
+	if (dmi_check_system(intel_no_lvds))
+		return false;
+
+	pin = GMBUS_PORT_PANEL;
+	if (!lvds_is_present_in_vbt(dev, &pin)) {
+		DRM_DEBUG_KMS("LVDS is not present in VBT\n");
+		return false;
+	}
+
+	if (HAS_PCH_SPLIT(dev)) {
+		if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
+			return false;
+		if (dev_priv->edp.support) {
+			DRM_DEBUG_KMS("disable LVDS for eDP support\n");
+			return false;
+		}
+	}
+
+	lvds_encoder = kzalloc(sizeof(struct intel_lvds_encoder), GFP_KERNEL);
+	if (!lvds_encoder)
+		return false;
+
+	lvds_connector = kzalloc(sizeof(struct intel_lvds_connector), GFP_KERNEL);
+	if (!lvds_connector) {
+		kfree(lvds_encoder);
+		return false;
+	}
+
+	lvds_encoder->attached_connector = lvds_connector;
+
+	if (!HAS_PCH_SPLIT(dev)) {
+		lvds_encoder->pfit_control = I915_READ(PFIT_CONTROL);
+	}
+
+	intel_encoder = &lvds_encoder->base;
+	encoder = &intel_encoder->base;
+	intel_connector = &lvds_connector->base;
+	connector = &intel_connector->base;
+	drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+	intel_encoder->enable = intel_enable_lvds;
+	intel_encoder->pre_enable = intel_pre_enable_lvds;
+	intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
+	intel_encoder->compute_config = intel_lvds_compute_config;
+	intel_encoder->disable = intel_disable_lvds;
+	intel_encoder->get_hw_state = intel_lvds_get_hw_state;
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
+
+	intel_connector_attach_encoder(intel_connector, intel_encoder);
+	intel_encoder->type = INTEL_OUTPUT_LVDS;
+
+	intel_encoder->cloneable = false;
+	if (HAS_PCH_SPLIT(dev))
+		intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+	else if (IS_GEN4(dev))
+		intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+	else
+		intel_encoder->crtc_mask = (1 << 1);
+
+	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
+	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		lvds_encoder->reg = PCH_LVDS;
+	} else {
+		lvds_encoder->reg = LVDS;
+	}
+
+	/* create the scaling mode property */
+	drm_mode_create_scaling_mode_property(dev);
+	drm_object_attach_property(&connector->base,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_ASPECT);
+	intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	edid = drm_get_edid(connector, intel_gmbus_get_adapter(dev_priv, pin));
+	if (edid) {
+		if (drm_add_edid_modes(connector, edid)) {
+			drm_mode_connector_update_edid_property(connector,
+								edid);
+		} else {
+			kfree(edid);
+			edid = ERR_PTR(-EINVAL);
+		}
+	} else {
+		edid = ERR_PTR(-ENOENT);
+	}
+	lvds_connector->base.edid = edid;
+
+	if (IS_ERR_OR_NULL(edid)) {
+		/* Didn't get an EDID, so
+		 * Set wide sync ranges so we get all modes
+		 * handed to valid_mode for checking
+		 */
+		connector->display_info.min_vfreq = 0;
+		connector->display_info.max_vfreq = 200;
+		connector->display_info.min_hfreq = 0;
+		connector->display_info.max_hfreq = 200;
+	}
+
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			DRM_DEBUG_KMS("using preferred mode from EDID: ");
+			drm_mode_debug_printmodeline(scan);
+
+			fixed_mode = drm_mode_duplicate(dev, scan);
+			if (fixed_mode) {
+				intel_find_lvds_downclock(dev, fixed_mode,
+							  connector);
+				goto out;
+			}
+		}
+	}
+
+	/* Failed to get EDID, what about VBT? */
+	if (dev_priv->lfp_lvds_vbt_mode) {
+		DRM_DEBUG_KMS("using mode from VBT: ");
+		drm_mode_debug_printmodeline(dev_priv->lfp_lvds_vbt_mode);
+
+		fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+		if (fixed_mode) {
+			fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
+			goto out;
+		}
+	}
+
+	/*
+	 * If we didn't get EDID, try checking if the panel is already turned
+	 * on.  If so, assume that whatever is currently programmed is the
+	 * correct mode.
+	 */
+
+	/* Ironlake: FIXME if still fail, not try pipe mode now */
+	if (HAS_PCH_SPLIT(dev))
+		goto failed;
+
+	lvds = I915_READ(LVDS);
+	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+	crtc = intel_get_crtc_for_pipe(dev, pipe);
+
+	if (crtc && (lvds & LVDS_PORT_EN)) {
+		fixed_mode = intel_crtc_mode_get(dev, crtc);
+		if (fixed_mode) {
+			DRM_DEBUG_KMS("using current (BIOS) mode: ");
+			drm_mode_debug_printmodeline(fixed_mode);
+			fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
+			goto out;
+		}
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!fixed_mode)
+		goto failed;
+
+out:
+	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
+	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
+		      lvds_encoder->is_dual_link ? "dual" : "single");
+
+	/*
+	 * Unlock registers and just
+	 * leave them unlocked
+	 */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(PCH_PP_CONTROL,
+			   I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
+	} else {
+		I915_WRITE(PP_CONTROL,
+			   I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
+	}
+	lvds_connector->lid_notifier.notifier_call = intel_lid_notify;
+	if (acpi_lid_notifier_register(&lvds_connector->lid_notifier)) {
+		DRM_DEBUG_KMS("lid notifier registration failed\n");
+		lvds_connector->lid_notifier.notifier_call = NULL;
+	}
+	drm_sysfs_connector_add(connector);
+
+	intel_panel_init(&intel_connector->panel, fixed_mode);
+	intel_panel_setup_backlight(connector);
+
+	return true;
+
+failed:
+	DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
+	drm_connector_cleanup(connector);
+	drm_encoder_cleanup(encoder);
+	if (fixed_mode)
+		drm_mode_destroy(dev, fixed_mode);
+	kfree(lvds_encoder);
+	kfree(lvds_connector);
+	return false;
+}