Merge branch 'master' into SergeyDegtyar/anlogic

1 files changed, 116 insertions, 0 deletions

diff --git a/techlibs/xilinx/xc7_ff_map.v b/techlibs/xilinx/xc7_ff_map.v
new file mode 100644
index 000000000..32ca9f560
--- /dev/null
+++ b/techlibs/xilinx/xc7_ff_map.v
@@ -0,0 +1,116 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+// ============================================================================
+// FF mapping for Virtex 6, Series 7 and Ultrascale.  These families support
+// the following features:
+//
+// - a CLB flip-flop can be used as a latch or as a flip-flop
+// - a CLB flip-flop has the following pins:
+//
+//   - data input
+//   - clock (or gate for latches) (with optional inversion)
+//   - clock enable (or gate enable, which is just ANDed with gate — unused by
+//     synthesis)
+//   - either a set or a reset input, which (for FFs) can be either
+//     synchronous or asynchronous (with optional inversion)
+//   - data output
+//
+// - a flip-flop also has an initial value, which is set at device
+//   initialization (or whenever GSR is asserted)
+
+`ifndef _NO_FFS
+
+module  \$_DFF_N_   (input D, C, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R(1'b0));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DFF_P_   (input D, C, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDRE   #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R(1'b0));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+
+module  \$_DFFE_NP_ (input D, C, E, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E),    .R(1'b0));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DFFE_PP_ (input D, C, E, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDRE   #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E),    .R(1'b0));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+
+module  \$_DFF_NN0_ (input D, C, R, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDCE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR(!R));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DFF_NP0_ (input D, C, R, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDCE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR( R));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DFF_PN0_ (input D, C, R, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDCE   #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR(!R));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DFF_PP0_ (input D, C, R, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDCE   #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR( R));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+
+module  \$_DFF_NN1_ (input D, C, R, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDPE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE(!R));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DFF_NP1_ (input D, C, R, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDPE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE( R));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DFF_PN1_ (input D, C, R, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDPE   #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE(!R));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DFF_PP1_ (input D, C, R, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  FDPE   #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE( R));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+
+module  \$_DLATCH_N_ (input E, D, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  LDCE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_G_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(1'b0));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+module  \$_DLATCH_P_ (input E, D, output Q);
+  parameter _TECHMAP_WIREINIT_Q_ = 1'bx;
+  LDCE   #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(1'b0));
+  wire _TECHMAP_REMOVEINIT_Q_ = 1;
+endmodule
+
+`endif
+