1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
|
/* sst40lf020.c: driver for SST40LF040 flash models.
*
*
* Copyright 2000 Silicon Integrated System Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* Reference:
* 4 MEgabit (512K x 8) SuperFlash EEPROM, SST49lF040 data sheet
*
* ToDo: Consilidated to standard JEDEC code.
*
* $Id$
*/
#include <stdio.h>
#include "flash.h"
#include "jedec.h"
#include "sst49lf040.h"
#define AUTO_PG_ERASE1 0x20
#define AUTO_PG_ERASE2 0xD0
#define AUTO_PGRM 0x10
#define CHIP_ERASE 0x30
#define RESET 0xFF
#define READ_ID 0x90
static int erase_sector_49lf040 (volatile char * bios, unsigned int page)
{
/* Chip erase function does not exist for LPC mode on 49lf040.
* Erase sector-by-sector instead. */
volatile unsigned char *Temp;
/* Issue the Sector Erase command to 40LF040 */
Temp = bios + 0x5555; /* set up address to be C000:5555h */
*Temp = 0xAA; /* write data 0xAA to the address */
myusec_delay(10);
Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */
*Temp = 0x55; /* write data 0x55 to the address */
myusec_delay(10);
Temp = bios + 0x5555; /* set up address to be C000:5555h */
*Temp = 0x80; /* write data 0x80 to the address */
myusec_delay(10);
Temp = bios + 0x5555; /* set up address to be C000:5555h */
*Temp = 0xAA; /* write data 0xAA to the address */
myusec_delay(10);
Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */
*Temp = 0x55; /* write data 0x55 to the address */
myusec_delay(10);
Temp = bios + page; /* set up address to be the current sector */
*Temp = 0x30; /* write data 0x30 to the address */
/* wait for Toggle bit ready */
toggle_ready_jedec(bios);
return(0);
}
static __inline__ int write_sector_49lf040(volatile char * bios,
unsigned char * src,
volatile unsigned char * dst,
unsigned int page_size)
{
int i;
volatile char *Temp;
for (i = 0; i < page_size; i++) {
if (*dst != 0xff) {
printf("FATAL: dst %p not erased (val 0x%x)\n", dst, *dst);
return(-1);
}
/* transfer data from source to destination */
if (*src == 0xFF) {
dst++, src++;
/* If the data is 0xFF, don't program it */
continue;
}
Temp = (bios + 0x5555);
*Temp = 0xAA;
Temp = bios + 0x2AAA;
*Temp = 0x55;
Temp = bios + 0x5555;
*Temp = 0xA0;
*dst = *src;
toggle_ready_jedec(bios);
if (*dst != *src)
printf("BAD! dst 0x%lx val 0x%x src 0x%x\n",
(unsigned long)dst, *dst, *src);
dst++, src++;
}
return(0);
}
int probe_49lf040 (struct flashchip * flash)
{
volatile char * bios = flash->virt_addr;
unsigned char id1, id2;
*(volatile char *) (bios + 0x5555) = 0xAA;
myusec_delay(10);
*(volatile char *) (bios + 0x2AAA) = 0x55;
myusec_delay(10);
*(volatile char *) (bios + 0x5555) = 0x90;
myusec_delay(10);
id1 = *(volatile unsigned char *) bios;
id2 = *(volatile unsigned char *) (bios + 0x01);
*(volatile char *) (bios + 0x5555) = 0xAA;
*(volatile char *) (bios + 0x2AAA) = 0x55;
*(volatile char *) (bios + 0x5555) = 0xF0;
myusec_delay(10);
printf("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2);
if (id1 == flash->manufacture_id && id2 == flash->model_id)
return 1;
return 0;
}
/* Chip erase only works in parallel programming mode for the 49lf040.
* Use sector-erase instead */
int erase_49lf040 (struct flashchip * flash)
{
volatile unsigned char * bios = flash->virt_addr;
volatile unsigned char *Temp;
/* Issue the Sector Erase command to 40LF040 */
Temp = bios + 0x5555; /* set up address to be C000:5555h */
*Temp = 0xAA; /* write data 0xAA to the address */
myusec_delay(10);
Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */
*Temp = 0x55; /* write data 0x55 to the address */
myusec_delay(10);
Temp = bios + 0x5555; /* set up address to be C000:5555h */
*Temp = 0x80; /* write data 0x80 to the address */
myusec_delay(10);
Temp = bios + 0x5555; /* set up address to be C000:5555h */
*Temp = 0xAA; /* write data 0xAA to the address */
myusec_delay(10);
Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */
*Temp = 0x55; /* write data 0x55 to the address */
myusec_delay(10);
Temp = bios + 0x5555; /* set up address to be C000:5555h */
*Temp = 0x10; /* write data 0x55 to the address */
myusec_delay(50000);
return(0);
}
int write_49lf040 (struct flashchip * flash, unsigned char * buf)
{
int i;
int total_size = flash->total_size * 1024, page_size = flash->page_size;
volatile char * bios = flash->virt_addr;
printf ("Programming Page: ");
for (i = 0; i < total_size/page_size; i++) {
/* erase the page before programming */
erase_sector_49lf040(bios, i * page_size);
/* write to the sector */
printf ("%04d at address: 0x%08x ", i, i * page_size);
write_sector_49lf040(bios, buf + i * page_size, bios + i * page_size,
page_size);
printf ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
fflush(stdout);
}
printf("\n");
return(0);
}
|
