aboutsummaryrefslogtreecommitdiffstats
path: root/ichspi.c
Commit message (Collapse)AuthorAgeFilesLines
* ichspi.c: Check SPI Cycle In-Progress prior start HW SeqSubrata Banik2022-03-091-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per EDS, SPI controller sets the HSFSTS.bit5 (SCIP) when software sets the Flash Cycle Go (FGO) bit in the Hardware Sequencing Flash Control register. This bit remains set until the cycle completes on the SPI interface. Hardware automatically sets and clears this bit. Software must initiate the next SPI transaction when this bit is 0. Platform Setup: Alder Lake based ChromeOS devices (Brya variants) Replication Steps: Accepting and running firmware Auto Update (AU) on the Brya variants (dogfooder system) is seeing `flashrom` getting timed out. Problem Statement: Evidencing AU (Auto Update) failure while performing firmware update on the Alder Lake based ChromeOS devices. Observation: Based on the initial understanding from the failure log/pattern, it seems like the platform is evidencing multiple `flashrom` access from different source, for example: `futility` accesses flashrom for erase, write and read operation, `crossystem` uses flashrom for updating VBNV, additionally, `set_fw_good` script also uses `crossystem` to update the fw status. Solution: Without this SCIP check being implemented in flashrom, there is no way to ensure multiple instances of flashrom performing different SPI operations are not cancelling each other and running into below error: Erasing and writing flash chip... Timeout error between offset 0x0061c000 and 0x0061c03f (= 0x0061c000 + 63)! FAILED! Uh oh. Erase/write failed. Checking if anything has changed. TEST=Able to flash coreboot image on Alder Lake (Brya variants), Tiger Lake (Volteer variants), Kaby Lake (Eve system), Comet Lake (Hatch variants) and Ivybridge without any failure. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib9265cc20513fd00f32f8fa22e28c312903ca484 Reviewed-on: https://review.coreboot.org/c/flashrom/+/61854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* ichspi: Add Alder Lake supportEdward O'Callaghan2022-03-071-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Does exactly what it says on the tin. BUG=b:220799648 TEST=```localhost ~ # flashrom --flash-name <snip> Found Programmer flash chip "Opaque flash chip" (32768 kB, Programmer-specific) mapped at physical address 0x0000000000000000. vendor="Programmer" name="Opaque flash chip" flashrom -p internal --ifd -i fd -i bios -r /tmp/filename.rom flashrom unknown on Linux 5.15.22 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). coreboot table found at 0x768a7000. Found chipset "Intel Alder Lake-N". Enabling flash write... Warning: Setting BIOS Control at 0xdc from 0x8b to 0x89 failed. New value is 0x8b. SPI Configuration is locked down. OK. Found Winbond flash chip "W25Q256JV_M" (32768 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Error accessing W25Q256JV_M, 0x2000000 bytes at 0x00000000fe000000 /dev/mem mmap failed: Resource temporarily unavailable Could not map flash chip W25Q256JV_M at 0x00000000fe000000. Reading ich descriptor... done. Using regions: "bios", "fd". Error accessing W25Q256JV_M, 0x2000000 bytes at 0x00000000fe000000 /dev/mem mmap failed: Resource temporarily unavailable Could not map flash chip W25Q256JV_M at 0x00000000fe000000. Reading flash... done. SUCCESS Also, Reading ich descriptor... Reading 4096 bytes starting at 0x000000. done. Assuming chipset '600 series Alder Point'. Added layout entry 00000000 - 00000fff named fd Added layout entry 00500000 - 01ffffff named bios Added layout entry 00001000 - 004fffff named me ``` Tested on Nivviks/ADL-N and Brya/ADL-P. Change-Id: Ie66cf519df13f3391c41f5016b16a81ef3dfd4bf Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/62251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sam McNally <sammc@google.com>
* Add Elkhart Lake supportWerner Zeh2022-02-041-2/+11
| | | | | | | | | | | | | | | | Elkhart Lake has a chipset called Mule Creek Canyon which is quite compatible with 300 series chipsets. There are a few differences though, e.g. different encoding for the SPI clock values for read and write in the FLCOMP register. In addition Elkhart Lake has a new PCI device ID for the SPI controller which is added, too. TEST=Read and flash complete flash on Siemens MC EHL1 Change-Id: I711e39a3ec9cd7098389231eaa1cb864d615a475 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/60711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* ichspi: Remove unneeded line breaks, add useful line breaks and tabsAnastasia Klimchuk2022-02-021-58/+36
| | | | | | | | | | | | | | | | BUG=b:204488958 TEST=Check that the following scenarios still behave properly: 1) probe-read-verify-erase section-write-reboot on Intel octopus board with GD25LQ128C/GD25LQ128D/GD25LQ128E 2) flashrom binary built before and after this patch with command `make clean && make CONFIG_EVERYTHING=yes VERSION=none` is the same Change-Id: I7ca2902b7caaa95418b828b068c661afafdcd171 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/60272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* ichspi: Extract initialisation of swseq and hwseq into a functionAnastasia Klimchuk2022-02-021-34/+41
| | | | | | | | | | | | | | | | | | | | | | | | Initialisation of swseq_data and hwseq_data gets its own function, which is called from init_ich_default. This makes init_ich_default more readable. This patch also gives a name to (previously anonymous) struct swseq_data. Its sibling struct hwseq_data already has a name. Structs need names to be able to declare function parameters. BUG=b:204488958 TEST=Check that the following scenarios still behave properly: 1) probe-read-verify-erase section-write-reboot on Intel octopus board with GD25LQ128C/GD25LQ128D/GD25LQ128E 2) probe and read on Panther Point (7 series PCH) Change-Id: I7d62b1b380e497b82dcae1284d752204cc541bd3 Tested-by: Anastasia Klimchuk <aklm@chromium.org> Tested-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/58737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* ichspi: Extract handling programmer param into a functionAnastasia Klimchuk2022-02-021-27/+37
| | | | | | | | | | | | | | | | | | | | | Extract processing of ich_spi_mode into a separate function which is called from init_ich_default. This makes init_ich_default more readable and avoids one local variable. BUG=b:204488958 TEST=Check that the following scenarios still behave properly: 1) probe-read-verify-erase section-write-reboot on Intel octopus board with GD25LQ128C/GD25LQ128D/GD25LQ128E 2) probe and read on Panther Point (7 series PCH) Change-Id: I20e2379a6fd58c9346f0a2d6daf2b8decf1f6976 Tested-by: Anastasia Klimchuk <aklm@chromium.org> Tested-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/58736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
* ichspi: Split very long init function into twoAnastasia Klimchuk2022-02-021-242/+255
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ich_init_spi is very long, but logically it can be split. Init function detects the chipset and then the rest of operations depends on the chipset. Init function is more readable now, it consists of only a switch. Initialisation of hwseq and swseq that used to happen in the beginning of init function now moved to init_ich_default, because hwseq and swseq are only used for chipsets served by init_ich_default. BUG=b:204488958 TEST=Check that the following scenarios still behave properly: 1) probe-read-verify-erase section-write-reboot on Intel octopus board with GD25LQ128C/GD25LQ128D/GD25LQ128E 2) probe and read on Panther Point (7 series PCH) 3) on machine with ich7 chipset, output from probe and read is the same between master and this patch Change-Id: I6789bc456a4878e6555831ae0b80ecbdbf62938b Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Tested-by: Anastasia Klimchuk <aklm@chromium.org> Tested-by: Nico Huber <nico.h@gmx.de> Tested-by: Nicholas Chin <nic.c3.14@gmail.com> Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/58735 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* hwaccess: move mmio functions into hwaccess_physmapThomas Heijligen2022-01-201-1/+0
| | | | | | | | | | | The mmio_le/be_read/writex functions are used for raw memory access. Bundle them with the physmap functions. Change-Id: I313062b078e89630c703038866ac93c651f0f49a Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/61160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* physmap: rename to hwaccess_physmap, create own headerThomas Heijligen2021-12-221-0/+1
| | | | | | | | | | Line up physmap with the other hwaccess related code. Change-Id: Ieba6f4e94cfc3e668fcb8b3c978de5908aed2592 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/60113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Add Tiger Lake U Premium supportMichał Żygowski2021-11-171-1/+10
| | | | | | | | | | | | | | | | | | | | | | Tiger Lake has very low ICCRIBA (TGL=0x11, CNL=0x34 and CML=0x34) and detects as unknown chipset compatible with 300 series chipset. Add a new enum CHIPSET_500_SERIES_TIGER_POINT and treat it identically to CHIPSET_400_SERIES_COMET_POINT. There are some exceptions though, ICCRIBA is no longer present n descriptor content so a new union has been defined for new fields and used in descriptor guessing. freq_read field is not present on Tiger Lake, moreover in CannonPoint and Comet Point this field is used as eSPI/EC frequency, so a new function to print read frequency has ben added. Finally Tiger lake boot straps include eSPI, so a new bus has been added for the new straps. TEST=Flash BIOS region on Intel i5-1135G7 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I28f3b6fe9f8ce9e976a6808683f46b6f4ec72bdd Reviewed-on: https://review.coreboot.org/c/flashrom/+/55578 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* remove compile guardsThomas Heijligen2021-09-261-4/+0
| | | | | | | | | | | | | The build system handles the decision when to build a file. Extra compile guards for the source files are not necessary. Change-Id: I76a76e05c7a7dd27637325ab1e9d8946fd5f9076 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/57797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
* treewide: Drop unnecessary uses of memset/memcpyAngel Pons2021-06-091-3/+1
| | | | | | | | | | Simply provide an initialiser or use a direct assignment instead. Change-Id: I07385375cd8eec8a95874001b402b2c17ec09e09 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/55267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* treewide: Drop most cases of `sizeof(struct ...)`Angel Pons2021-06-091-1/+1
| | | | | | | | | | | | | | | | Spelling out the struct type name hurts readability and introduces opportunities for bugs to happen when the pointer variable type is changed but the corresponding sizeof is (are) not. TEST=`make CONFIG_EVERYTHING=yes CONFIG_JLINK_SPI=no VERSION=none -j` with and without this patch; the flashrom executable does not change. Change-Id: Icc0b60ca6ef9f5ece6ed2a0e03600bb6ccd7dcc6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/55266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
* programmer: Smoothen register_opaque_master() APIAnastasia Klimchuk2021-05-231-1/+1
| | | | | | | | | | | | | | | | It was impossible to register a const struct opaque_master that would point to dynamically allocated `data`. Fix that so that we won't have to create more mutable globals. BUG=b:185191942 TEST=builds Change-Id: Id3adb4cf04ae04dbe87ddb96f30871cb5f7c8ff0 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/54170 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add Gemini Lake supportAngel Pons2021-05-161-2/+9
| | | | | | | | | | | The SPI hardware is pretty much unchanged from Apollo Lake. However, the IFD differs significantly enough to require special handling. Signed-off-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ib5dcdf204166f44a8531c19b5f363b851d2ccd77 Reviewed-on: https://review.coreboot.org/c/flashrom/+/54276 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* programmer: Smoothen register_spi_master() APINico Huber2021-05-131-3/+3
| | | | | | | | | | | | | It was impossible to register a const struct spi_master that would point to dynamically allocated `data`. Fix that so that we won't have to create more mutable globals. Change-Id: I0c753b3db050fb87d4bbe2301a7ead854f28456f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/54066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* tree: Remove forward-declarations for spi mastersAnastasia Klimchuk2021-02-161-165/+159
| | | | | | | | | | | | | | | | | Reorder functions to avoid forward-declarations. It looks like for most of the spi masters this has already been done before, I covered remaining small ones in one patch. BUG=b:140394053 TEST=builds Change-Id: I23ff6b79d794876f73b327f18784ca7c04c32c84 Signed-off-by: Anastasia Klimchuk <aklm@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/50711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Add support for Comet Lake-U/400-series PCHMatt DeVillier2020-09-241-1/+10
| | | | | | | | | | | | | | | | Add enum CHIPSET_400_SERIES_COMET_POINT and treat it identically to CHIPSET_300_SERIES_CANNON_POINT. Add PCI IDs for Comet Lake, CML-U Premium and classify as CHIPSET_400_SERIES_COMET_POINT. Test: read/write unlocked CML-U board Change-Id: I43b4ad1eecfed16fec59863e46d4e997fbe45f1b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/44420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
* ichspi.c: Make ich_init_spi() parameteric on spibarEdward O'Callaghan2020-07-161-27/+27
| | | | | | | | | | | | The ich_init_spi() function takes spibar as a parameter and sets the global ich_spibar with it but then uses the global symbol instead of using the parameter directly. Change-Id: Id809c33d8a4074acbee8e1cd8e3b7b00ce0cb3ec Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/43506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* ichspi.c: Make pprinters parametric on ich_generationEdward O'Callaghan2020-07-161-16/+17
| | | | | | | | | | | | | | | Make the two prettyprint functions pure by taking the ich_generation value as a function parameter over a global variable: * prettyprint_ich9_reg_hsfs() * prettyprint_ich9_reg_hsfc() Change-Id: I5d4fb012c6b9b843ac30c1fe2ea6fe754c545a43 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/43501 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* ichspi.c: Make ich_set_bbar() parameteric on ich_generationEdward O'Callaghan2020-07-161-5/+5
| | | | | | | | | | | Work towards dropping ich_generation global usage and make the ich_set_bbar() function pure. Change-Id: I6da6dccb413cbafa2fbaca213574f22c7a258139 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/43500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* ichspi.c: Make ich_init_opcodes() parameteric on ich_generationEdward O'Callaghan2020-07-161-13/+13
| | | | | | | | | | | Work towards dropping ich_generation global usage and make the ich_init_opcodes() function pure. Change-Id: I68cc078cc8bc1c772f52ca3e5e12559991180210 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/43499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* ichspi.c: Make ich_init_spi() parametric on ich_generationEdward O'Callaghan2020-07-161-5/+5
| | | | | | | | | | | Work towards dropping ich_generation global usage and make the ich_init_spi() function more pure. Change-Id: I5293e7ae6f20a2299577172655c2926861091f5a Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/43498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* const'ify flashctx to align signatures with cros flashromEdward O'Callaghan2020-04-301-2/+2
| | | | | | | | | | | | | | | | The ChromiumOS flashrom fork has since const'ify flashctx in a few places. This aligns the function signatures to match with downstream to ease forward porting patches out of downstream back into mainline flashrom. This patch is minimum viable alignment and so feedback is welcome. Change-Id: Iff6dbda13cb0d941481c0d204b9c30895630fbd1 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/40324 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* ichspi: Replace default JEDEC_BE_D8 with JEDEC_SEDavid Hendricks2019-09-241-1/+1
| | | | | | | | | | | | | | This aligns the upstream master branch with chromium's. On-the-fly opcode reprogramming is supported by both branches so the default opcode shouldn't matter. Review URL: http://codereview.chromium.org/3239001 Change-Id: I379549e8fa966e75e3d8b7932700df62cf50df64 Signed-off-by: Mayur Panchal <panchalm@google.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/34689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* ichspi: Add support for discrete Cannon Lake PCHsNico Huber2019-08-081-11/+33
| | | | | | | | | | | | | | | | Only minor differences in the Firmware Descriptor, compared to their predecessors. We extend our check on the `ICCRIBA` field in the descriptor to dis- tinguish it from older generation. Alas, the `freq_read` field was repurposed, so we can't use it as sanity check any more. Change-Id: I1c2d1e8916cecd756e7ac1f0ba221d7cc361ba02 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/34072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
* Fix -Wsign-compare troubleNico Huber2019-07-311-9/+9
| | | | | | | | | | | Mostly by changing to `unsigned` types where applicable, sometimes `signed` types, and casting as a last resort. Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
* ichspi: Add Apollo Lake supportNico Huber2019-07-061-38/+74
| | | | | | | | | | | | | | | It's almost identical to 100 series PCHs and later. There are some additional FREGs (12..15). To not clutter the `if` conditions further, make more use of `switch` statements. Tested on Kontron mAL10. Mark it as DEP as usually the last sector is not covered by the descriptor layout and can't be read. Change-Id: I1c464b5b3d151e6d28d5db96495fe874a0a45718 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/flashrom/+/30995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* spi: Drop spi_controller typeNico Huber2019-06-271-3/+0
| | | | | | | | | | Not needed anymore. Drop it fast before it encourages anyone to violate layers again! Change-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33651 Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* ichspi.c: Remove unneeded 'else'Elyes HAOUAS2019-06-211-12/+12
| | | | | | | | | | 'else' is not needed after a 'break' or 'return'. Change-Id: Ie000732158f27632ee92404c66a9aab43f3b374c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/flashrom/+/33347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Rework internal bus handling and laptop bail-outNico Huber2019-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | We used to bail out on any unknown laptop. However, modern systems with SPI flashes don't suffer from the original problem. Even if a flash chip is shared with the EC, the latter has to expect the host to send regular JEDEC SPI commands any time. So instead of bailing out, we limit the set of buses to probe. If we suspect to be running on a laptop, we only allow probing of SPI and opaque programmers. The user can still use the existing force options to probe all buses. This will obsolete some board-enables that could be moved to `print.c` in follow-up commits. Change-Id: I1dbda8cf0c10d7786106f14f0d18c3dcce35f0a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/flashrom/+/28716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Thomas Heijligen <src@posteo.de>
* Fix several -Wno-implicit-fallthrough warningsRichard Hughes2019-02-111-2/+2
| | | | | | | | | | | | GCC is picky about the comment being where the break should go. Change-Id: I05db2fb34025fefe2c6ddd1274c8e45b7cc5a4b6 Signed-off-by: Richard Hughes <richard@hughsie.com> Reviewed-on: https://review.coreboot.org/c/30406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Fix one more -Wmissing-field-initializers warningRichard Hughes2019-02-031-1/+3
| | | | | | | | | | | | | Fixes: ichspi.c: In function ‘ich_init_spi’: ichspi.c:1707:9: warning: missing initializer for field ‘component’ Change-Id: Iee5728167963fece24822ad2e3ab7bd9d444b42c Signed-off-by: Richard Hughes <richard@hughsie.com> Reviewed-on: https://review.coreboot.org/c/31224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Fix several -Wno-missing-field-initializers warningsRichard Hughes2019-02-031-1/+1
| | | | | | | | Change-Id: Ib4487d4c1a38fa8471fa1f9034604412e9d14cf7 Signed-off-by: Richard Hughes <richard@hughsie.com> Reviewed-on: https://review.coreboot.org/c/30405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Fix several -Wold-style-declaration warningsRichard Hughes2019-02-031-1/+1
| | | | | | | | Change-Id: Iffe5e652779a13ee7f64696fb5df4a781fe9a632 Signed-off-by: Richard Hughes <richard@hughsie.com> Reviewed-on: https://review.coreboot.org/c/30404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Enable writes with active MENico Huber2018-05-291-46/+38
| | | | | | | | | | | | | Replace the `ich_spi_force` logic with more helpful warnings. These can be hidden later, in case the necessary switches are detected. Also, demote some warnings about settings that are the default nowadays (e.g. SPI configuration lock, inaccessible ME region). Change-Id: I94a5e7074b845c227e43d76d04dd1a71082a1cef Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* Remove address from GPLv2 headersElyes HAOUAS2018-04-241-4/+0
| | | | | | | | Change-Id: I7bfc339673cbf5ee2d2ff7564c4db04ca088d0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* Fix whitespace errorsElyes HAOUAS2018-04-241-2/+2
| | | | | | | | Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* spi: Move ICH BBAR quirk out of the wayNico Huber2017-12-281-14/+25
| | | | | | | | | | | | | | | | | | | | | Get rid of the layering violations around ICH's BBAR. Move all the weird address handling into (surprise, surprise) `ichspi.c`. Might fix writes for the `BBAR != 0` case by accident. Background: Some ICHs have a BBAR (BIOS Base Address Configuration Register) that, if set, limits the valid address range to [BBAR, 2^24). Current code lifted addresses for REMS, RES and READ operations by BBAR, now we do it for all addresses in ichspi. Special care has to be taken if the BBAR is not aligned by the flash chip's size. In this case, the lower part of the chip (from BBAR aligned down, up to BBAR) is inacces- sible (this seems to be the original intend behind BBAR) and has to be left out in the address offset calculation. Change-Id: Icbac513c5339e8aff624870252133284ef85ab73 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22396 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* ichspi: Fix 100 series PCH (Skylake) supportNico Huber2017-12-191-1/+1
| | | | | | | | | | | | | | Pretty subtle missing `else` made flashrom treat Skylake like older chipsets. Change-Id: I14bf578964124d4677cb5dfca01c9d1b0d279c9c Signed-off-by: Nico Huber <nico.h@gmx.de> Reported-by: Youness Alaoui <kakaroto@kakaroto.homelinux.net> Reviewed-on: https://review.coreboot.org/22832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* ichspi: Disable software sequencing by default for SkylakeNico Huber2017-11-051-0/+5
| | | | | | | | | | | | | | | Skylake is a mess, especially with coreboot. We have now a present and configured software sequencing interface with SCGO supposedly being readonly (Apollo Lake has that feature and a strap documented, Skylake behaviour might be the same). As we can't easily check if it's read- only, just enable hardware sequencing by default (even if the software sequencing interface seems usable). Change-Id: I8a13fb9c3ca679b3f7d39ad1dc56d5efdc80045b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/22274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* ichspi: Fix software sequencing for SkylakeNico Huber2017-11-031-2/+2
| | | | | | | | | | | Two occurences of ICH9_REG_OPMENU were overlooked and not replaced, rendering the software sequencing unusable on Skylake. Change-Id: I16eebcf37ab8ba39b02f33135535552e380b0b92 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/22273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
* chipset_enable: Add support for C620-series Lewisburg PCHDavid Hendricks2017-09-011-6/+21
| | | | | | | | | | | | | | | | This adds PCI IDs for C620-series PCHs and adds CHIPSET_C620_SERIES_LEWISBURG as a new entry in the ich_chipset enum. Lewisburg is very similar to Sunrise Point for Flashrom's purposes, however one important difference is the way the "number of masters" is interpreted from the flash descriptor (0-based vs. 1-based). There are also new flash regions defined. Change-Id: I96c89bc28bdfcd953229c17679f2c28f8b874d0b Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/20922 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* ichspi: "Fix" access permission reporting for regions > 7Nico Huber2017-08-211-2/+18
| | | | | | | | | | | Can't find bits that tell us the actual permissions in charge. So report them as unknown. Change-Id: Ib73f95e0348f5c6d89988e3ea3529af0ec3b23a6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/21106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* ich_descriptors: Draw +0xfff into ICH_FREG_LIMIT()Nico Huber2017-07-281-5/+3
| | | | | | | | | | | The condition `base > limit` is still valid since `base` is always at least 4096 greater than `limit` in this case. Change-Id: I11ac0a50b3f32f47879e7cfb7a26068cd0572ede Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19046 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* ichspi: Add support for Intel SkylakeNico Huber2017-07-281-71/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Sunrise Point PCH, paired with Skylake, has some minor changes in the HW sequencing interface: * Support for more flash regions moved PR* registers * Only 4KiB erase blocks are supported by the primary erase command * A second erase command for 64KiB pages was added * More commands were added for status register access etc. * A "Dedicated Lock Bits" register was added No support for the new commands was added. The SW sequencing interface seems to have moved register location and is not supported any more officially. It's also untested. Changes are loosely based on the Skylake support commit in Chromium OS by Ramya Vijaykumar: commit a9a64f9e4d52c39fcd3c5f7d7b88065baed189b1 Author: Ramya Vijaykumar <ramya.vijaykumar@intel.com> flashrom: Add Skylake platform support Change-Id: I0f4565a3c39f5fe3aec4fc8863605cebed1ad4ee Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/18962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
* Drop redundant `enum msglevel`Nico Huber2017-07-131-3/+3
| | | | | | | | | | | | Use `enum flashrom_log_level` instead to avoid further confusion. Change-Id: I1895cb8f60da3abf70c9c2953f52414cd2cc10a9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20268 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* ichspi: Drop `dev` parameter from init functionsNico Huber2017-06-201-2/+2
| | | | | | | | | | | | It's never used and has no clear contract (e.g. will the pointer stay valid beyond the call?). Change-Id: I0d4e7cc731364e86eff214b9022b842a577f9ef4 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
* Pimp the manpage to create nicer hyperlinks and HTML outputStefan Tauner2016-01-141-2/+2
| | | | | | | | | | Also, add a target to the makefile to build a flashrom.8.html with groff. To fix some formatting issues this adds some indention commands as well. Corresponding to flashrom svn r1913. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 22Stefan Tauner2015-02-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - AOpen UK79G-1394 (used in EZ18 barebones) Reported by Lawrence Gough - ASUS M4N78 SE Reported by Dima Veselov - ASUS P5LD2-VM Mark board enable as tested (reported by Dima Veselov) - GIGABYTE GA-970A-UD3P (rev. 2.0) Reported by trucmar on IRC - GIGABYTE GA-990FXA-UD3 (rev. 4.0) Reported by ROKO__ on IRC - GIGABYTE GA-H77-DS3H (rev. 1.1) Reported by Evgeniy Edigarev - GIGABYTE GA-P55-USB3 (rev. 2.0) Reported by Måns Thörnqvist - MSI MS-7817 (H81M-E33) Reported by Igor Kolker Chipsets: - Marked Intel Bay Trail (0x0f1c) as tested OK Reported by Antonio Ospite - Refine Intel IDs * Add IDs for Braswell * Add IDs for 9 Series PCHs (e.g. H97, Z97) * Rename Wellsburg devices slightly Flash chips: - Atmel AT25DF041A to PREW (+PREW) Reported by Tai-hwa Liang - Atmel AT26DF161 to PREW (+EW) Reported by Steve Shenton - Atmel AT45DB011D to PREW (+PREW) Reported by The Raven - Atmel AT45DB642D to PREW (+PREW) Reported by Mahesh Mokal - Eon EN25F32 to PREW (+PREW) Reported by Arman Khodabande - Eon EN25F40 to PREW (+REW) Reported by Jerrad Pierce - Eon EN25QH16 to PREW (+EW) Reported by Ben Johnson - GigaDevice GD25Q20(B) to PREW (+PREW) Reported by Gilles Aurejac - Macronix MX25U6435E/F to PR (+PR) Reported by Matt Taggart - PMC Pm25LV512(A) to PREW (+PREW) Reported by The Raven - SST SST39VF020 to PREW (+PREW) Reported by Urja Rannikko - Winbond W25Q40.V to PREW (+EW) Reported by Torben Nielsen - Add E variants of MX25Lx006 (MX25L2006E, MX25L4006E, MX25L8006E). - Add MX25L6465E variant. - There was never a MX25L12805 AFAICT. - Split MX25L12805 from models with the same ID but an additional 32 kB eraser: MX25L12835F/MX25L12845E/MX25L12865E. - Add a bunch of ST parallel NOR flash chip IDs. Miscellaneous: - Whitelist ThinkPad X200. - Constify master parameter of register_master(). - Remove FEATURE_BYTEWRITES because it was never used at all. - Refine hwseq messages and make them less prominent. - Fix the yet unused PRIxCHIPADDR format string thingy. - Fix copy&paste error in spi_prettyprint_status_register_bp(). Spotted by Pablo Cases. - Add an additional SMBus controller revision to identify another Yangtze model. Thanks to Dan Christensen for reporting this issue. - dediprog: add missing include for stdlib.h. This fixes (at least) building on FreeBSD and DragonflyBSD with gcc. - Remove references to struct pci_filter from programmer.h. It is only needed in internal.c where it has a complete type. Having it in programmer.h provokes a warning by some old versions of gcc. - Tiny other stuff. Corresponding to flashrom svn r1879. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-24 22:38:40 +0000