aboutsummaryrefslogtreecommitdiffstats
path: root/board_enable.c
Commit message (Collapse)AuthorAgeFilesLines
...
* Add a board enable for MSI MS-6561 (745 Ultra)Mattias Mattsson2010-09-111-0/+2
| | | | | | | | | | | | | | | | SiS 745 chipset + Winbond W83697HF and Winbond W49F002U flash. Probe, read, erase and write all work. Matching on "NB/SB" (they are integrated). Also mark SiS 745 chipset as tested. lspci/superiotool: http://www.flashrom.org/pipermail/flashrom/2010-September/004705.html Corresponding to flashrom svn r1158. Signed-off-by: Mattias Mattsson <vitplister@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Board enable for P4P800Michael Karcher2010-09-101-0/+2
| | | | | | | | | | | | | | | | | | | | | lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004436.html This goes the safe route of adding a match for the P4P800 that does not match the P4P800-E Deluxe which is already in. It seems quite likely that the whole P4P800 family could use the same board enable with one generic board enable match, though. This match uses host bridge + audio, because all other IDs match the P4P800-E Deluxe board, as reported in http://www.e-monkeys.de/Everest-Bericht.txt (no user feedback, commit as "untested") Corresponding to flashrom svn r1157. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Board enable for ASUS P5GD1 ProMichael Karcher2010-09-101-0/+2
| | | | | | | | | | | | | lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html matching SMBus + Audio, because SMBus is the only core device with usable IDs. Corresponding to flashrom svn r1156. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add a board-enable for the MSI MS-6787 (P4MAM-V/P4MAM-L)Sergey A Lichack2010-09-071-0/+2
| | | | | | | | | | Marked as untested for now, as there was no response from the user. Corresponding to flashrom svn r1155. Signed-off-by: Sergey A Lichack <shadowpilot34@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add board-enable for the GIGABYTE GA-K8N51GMF-9Joshua Roys2010-09-071-0/+10
| | | | | | | | | | | | | | | Interestingly enough, this board's enable looked more like enable_flash_nvidia_nforce2 than enable_flash_ck804; it whacked 0x92, not 0x88. But according to the lspci, 0x92 is already 0. Tested successfully on hardware: http://www.flashrom.org/pipermail/flashrom/2010-August/004568.html http://www.flashrom.org/pipermail/flashrom/2010-September/004575.html Corresponding to flashrom svn r1154. Signed-off-by: Joshua Roys <roysjosh@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add board enable for Asus P2B-NMattias Mattsson2010-09-011-0/+10
| | | | | | | | | | | | Many thanks to Michael Karcher for reverse engineering this. lspci/superio output: http://www.flashrom.org/pipermail/flashrom/2010-August/004475.html Corresponding to flashrom svn r1146. Signed-off-by: Mattias Mattsson <vitplister@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add board enable for Abit VA6Mattias Mattsson2010-08-151-0/+2
| | | | | | | | | | lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004440.html Corresponding to flashrom svn r1143. Signed-off-by: Mattias Mattsson <vitplister@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Check availability of GPO lines on Intel PIIX4Mattias Mattsson2010-08-151-30/+43
| | | | | | | | | | | | | | | | | | | | | | | | This patch changes the intel_piix4_gpo_set() function to always check the GENCFG and XBCS registers for the availability of the requested GPO line before raising/lowering it and fails otherwise. It makes no attempt to bypass the values in these configuration registers. The old flashrom code did consider it safe to reprogram (multiplexed) GPO:s 22-26 without checking the value of the controlling register (GENCFG). I do not really know why. I have tested this patch on an Asus P2B-N (needs GPO18 low) and MSI MS-6163 Pro (needs GPO14 high). The information for these registers are from the Intel "82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4)" datasheet available here: http://www.intel.com/design/intarch/datashts/29056201.pdf Corresponding to flashrom svn r1142. Signed-off-by: Mattias Mattsson <vitplister@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various board status updates and fixesUwe Hermann2010-08-151-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - There are number of boards that have board-enables in board-enable.c but have no corresponding entry in print.c (with or without URL doesn't matter) and thus appear neither in the "flashrom -L" list of boards nor in the wiki output. Fix this by adding entries for them in print.c. - abit AN-M2 - abit KN8 Ultra - ASUS A8Jm (laptop) - ASUS A8N (might need changing to "A8N-SLI Deluxe", see http://www.coreboot.org/pipermail/flashrom/2009-November/000878.html) - ASUS A8N-LA (Nagami-GL8E) - ASUS P4B533-E - ASUS P4S800-MX - HP ProLiant DL165 G6 - IBASE MB899 - Intel SE440BX-2 (marked as non-working for now though, due to http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html) - MSI MS-6577 (Xenon) - MSI MS-7207 (K8NGM2-L) - Fix / amend a few board names: - Add "ProLiant" name to the "DL145 G3" (and the new "DL165 G6"), we use such "series" names for various other boards (e.g. "Vectra" etc) and it also helps users googling for those names. - HP "Vectra VL400 PC" should be "Vectra VL400" really, I'm pretty sure the "PC" is not part of the board name but simply stands for "personal computer". Same for "Vectra VL420 SFF PC". - Change "ASUS A8JM" to "ASUS A8Jm" as per vendor website. - Add comments for boards which may be listed with incorrect names, I sent out clarification requests to the list, URLs listed as comment. - Add "Xenon" HP name to the "MSI MS-6577" OEM board. - Fix typo in "MS-7207 (K8N GM2-L)", should be "MS-7207 (K8NGM2-L)" as per vendor website. Corresponding to flashrom svn r1141. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Mark the board-enable for ASUS A8N-LA (HP OEM "Nagami-GL8E") as testedSean Nelson2010-08-151-2/+2
| | | | | | | | | | | | | | Change the DMI string to only match this exact board (DMI "NAGAMI2L") as only this one is tested. Similar HP OEM boards might also work using this board-enable but that's not sure and not tested. Two of those boards have DMI strings "NAGAMI" and "NAGAMI2". Corresponding to flashrom svn r1140. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Board enable for MSI MS-7061 (KM4AM-V)Mattias Mattsson2010-08-151-0/+2
| | | | | | | | | | | | lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004414.html (URL added by Michael Karcher) Corresponding to flashrom svn r1139. Signed-off-by: Mattias Mattsson <vitplister@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Board enable for GA-8PE667 Ultra 2Michael Karcher2010-08-131-0/+2
| | | | | | | | | | | | | | I had to use the USB controller in the board enable because all other subsystem IDs are having vendor: Gigabyte but mostly copy the Intel product IDs. lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004420.html Corresponding to flashrom svn r1138. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Thomas Kalka <thomas.kalka@googlemail.com>
* Various cosmetic and coding-style fixesUwe Hermann2010-08-081-242/+280
| | | | | | | | | | | | | | | | | | | | | - Fix incorrect whitespace, indentation, and coding style in some places. - Drop '/**' Doxygen comments, we don't use Doxygen. Even if we would use it, the comments are useless as we don't have any Doxygen markup in there. - Use consistent vendor name spelling as per current website (NVIDIA, abit, GIGABYTE). - Use consistent / common format for "Suited for:" lines in board_enable.c. - Add some missing 'void's in functions taking no arguments. - Add missing fullstops in sentences, remove them from non-sentences (lists). Corresponding to flashrom svn r1134. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add a board-enable for the ASRock 775i65GJoshua Roys2010-08-081-0/+2
| | | | | | | | | | | This was successfully tested by 'kai2343' on IRC. Thanks to Michael Karcher for finding the board enable. Corresponding to flashrom svn r1133. Signed-off-by: Joshua Roys <roysjosh@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Mark the following boards/chips as testedUwe Hermann2010-08-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boards: - ASUS M4A785TD-M EVO (reported by Mattias Mattsson <vitplister@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004283.html - ASUS M2N32-SLI Deluxe (reported by Mattias Mattsson <vitplister@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004287.html - ASUS P2E-M (reported by Mattias Mattsson <vitplister@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-July/004261.html - ASUS M2N-SLI Deluxe (reported by Kasper M. Nielsen <kasper.nielsen85@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-May/003015.html - iBASE MB899 (reported by Bernhard M. Wiedemann <bernhard@lsmod.de>) http://www.flashrom.org/pipermail/flashrom/2010-April/002953.html Board-enable is now marked as tested. - ASRock 939A785GMH/128M (reported by Lennart Sauerbeck <lists@lennart.sauerbeck.org>) http://www.flashrom.org/pipermail/flashrom/2010-August/004340.html Corresponding to flashrom svn r1132. Chips: - ST M50FLW080A (reported by Mattias Mattsson <vitplister@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004287.html - Winbond W29EE011 (reported by Mattias Mattsson <vitplister@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-July/004261.html - SST SST49LF040 (reported by Mattias Mattsson <vitplister@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004296.html Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Board enable for MSI MS-6577Joshua Roys2010-08-071-0/+12
| | | | | | | | | | | | Thanks to "Putlinuxonit" <putlinuxonit@gmail.com> for reporting and testing. lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004309.html Corresponding to flashrom svn r1131. Signed-off-by: Joshua Roys <roysjosh@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Board enable for Asus P4S800-MXDavid Borg2010-08-021-1/+4
| | | | | | | | | | lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-July/004172.html Corresponding to flashrom svn r1130. Signed-off-by: David Borg <borg.db@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Further chip and board status updatesUwe Hermann2010-08-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark the following boards as supported: - Foxconn A6VMX (reported by Alec Wright <alecjw@member.fsf.org>) http://www.flashrom.org/pipermail/flashrom/2010-July/004186.html - GIGABYTE GA-8IRML (reported by Putlinuxonit <putlinuxonit@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-July/004175.html Marking the board-enable as tested now. - MSI MS-7253 (K9VGM-V) (reported by Alex <cerebro.alexiel@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-June/003411.html - Soyo SY-6BA+ III (reported by Andrew Morgan <ziltro@ziltro.com>) http://www.flashrom.org/pipermail/flashrom/2010-June/003409.html - GIGABYTE GA-770TA-UD3 (reported by Hering <boerni@pakke.de>) http://www.flashrom.org/pipermail/flashrom/2010-May/003267.html - Shuttle AV11V30 (reported by "Néstor a.k.a. DarkMan" <master_darkman@hotmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-May/003260.html - Tyan S3992 (reported by Alessandro Gervaso <gervaso@appliedgenomics.org>) http://www.flashrom.org/pipermail/flashrom/2010-May/003129.html - GIGABYTE GA-MA785GMT-UD2H (reported by Dominick Layfield <dom.layfield@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-May/003061.html Mark the following chips as tested: - ST M25P10-A (reported by Joshua Blanton <jblanton@rldrake.com>) http://www.flashrom.org/pipermail/flashrom/2010-June/003451.html - ST M50FLW080A (reported by Vincent Pelletier <plr.vincent@gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-June/003410.html Marked PROBE and READ as tested. - SST SST39SF020A (reported by Andrew Morgan <ziltro@ziltro.com>) http://www.flashrom.org/pipermail/flashrom/2010-June/003409.html - AMD Am29F010A/B (reported by Andrew Morgan <ziltro@ziltro.com>) http://www.flashrom.org/pipermail/flashrom/2010-June/003335.html - SST SST39VF010 (reported by Tim Small <tim@buttersideup.com>) http://www.flashrom.org/pipermail/flashrom/2010-May/003310.html Corresponding to flashrom svn r1129. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Board enable for abit NF-M2 nViewMichael Karcher2010-07-241-0/+9
| | | | | | | | | | | | | | | | To be safe, the onboard video of the nView edition of this board has been included in the match. If other NF-M2 editions have the same board enable, the match should be broadened lspci/superiotool http://www.coreboot.org/pipermail/flashrom/2010-April/002909.html No success report, thus committed as untested. Corresponding to flashrom svn r1109. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Detect IP35 by the SMBus bridge instead of the SATA controllerMichael Karcher2010-07-241-1/+1
| | | | | | | | | | | | | | | | | The SATA controller matched in the board enable is not always present with that ID (that's the 2-port ICH9 SATA IDE controller), but (depending on board revision/edition or BIOS settings an ICH9 SATA RAID controller appears instead. This patches matches on the SMBus function in the south bridge instead of the SATA controller. Non-working board reported by: Gunter Keilholz <gunter.keilholz@googlemail.com> lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-June/003591.html Corresponding to flashrom svn r1108. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Board enable for Samsung Polaris 32Michael Karcher2010-07-241-0/+2
| | | | | | | | | | | lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-July/003889.html Corresponding to flashrom svn r1107. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Tested-by: Alex Loktionoff <oxy-loktionoff@mail.ru> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Board enable for GA-8IRMLMichael Karcher2010-07-241-0/+9
| | | | | | | | | | | | Non-working board reported by idlogin / Putlinuxonit <putlinuxonit@gmail.com> lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-May/003330.html No success report, so committed as untested. Corresponding to flashrom svn r1106. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Board enable for Abit IC7Michael Karcher2010-07-241-0/+1
| | | | | | | | | | | | | Non-working board reported by: Anders Jenbo <anders@jenbo.dk> lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-June/003346.html no success report, so committed as untested. Corresponding to flashrom svn r1105. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix compilation which was broken by r1101Idwer Vollering2010-07-241-1/+1
| | | | | | | Corresponding to flashrom svn r1103. Signed-off-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Board enable for HP Puffer2-UL8EMichael Karcher2010-07-241-0/+9
| | | | | | | | | | lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-July/003869.html Corresponding to flashrom svn r1102. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Mattias Mattsson <vitplister@gmail.com>
* Board enable for ASUS P4SD-LA (HP OEM)Michael Karcher2010-07-241-0/+9
| | | | | | | | | No response from reporter - committed as "untested". Corresponding to flashrom svn r1101. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Board enable for ASUS P5PE-VMMichael Karcher2010-07-241-0/+2
| | | | | | | | Corresponding to flashrom svn r1100. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Tested-by: František Kučera <linux@frantovo.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for pciutils/libpci older than 2.2Carl-Daniel Hailfinger2010-07-171-0/+8
| | | | | | | | | | Needed on the original Xbox running Xebian and a few other ancient systems. Corresponding to flashrom svn r1088. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Alec Wright <alecjw@member.fsf.org>
* Generify support for ITE IT8705 Super I/OCarl-Daniel Hailfinger2010-07-101-26/+83
| | | | | | | | | | | | | | | | | Autodetect the ITE IT8705 Super I/O and enable flash writes if it performs LPC->Parallel translation. Remove board enables which triggered the IT8705 write enable manually. Change the IT87 SPI special case to cover IT87 LPC->SPI and LPC->Parallel translation. Corresponding to flashrom svn r1073. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested on Syntax SV266A. Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested on Shuttle AK38N, all operations work fine. Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix ASUS A8N-VM CSM board enable entryMichael Karcher2010-07-081-2/+2
| | | | | | | | | | | | r1063 had several issues: The PCI IDs for this board are copy/pasted from the A8N and plain wrong for this board and the board enable is marked as tested although it isn't. Finally the board description was slightly wrong and the URL missing. Corresponding to flashrom svn r1071. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Kill global variables, constants and functions if local scope sufficesCarl-Daniel Hailfinger2010-07-031-7/+7
| | | | | | | | | | | | | | | | | | | | | | | Constify variables where possible. Initialize programmer-related variables explicitly in programmer_init to allow running programmer_init from a clean state after programmer_shutdown. Prohibit registering programmer shutdown functions before init or after shutdown. Kill some dead code. Rename global variables with namespace-polluting names. Use a previously unused locking helper function in sst49lfxxxc.c. This is needed for libflashrom. Effects on the binary size of flashrom are minimal (300 bytes shrinkage), but the data section shrinks by 4384 bytes, and that's a good thing if flashrom is operating in constrained envionments. Corresponding to flashrom svn r1068. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add support for the HP DL165 G6Arne Georg Gleditsch2010-07-011-1/+16
| | | | | | | | | Change the match for the HP DL145 G3 to avoid matching on the DL165 G6. Corresponding to flashrom svn r1065. Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Check that the expected winbond Super I/O was foundMichael Karcher2010-06-291-0/+5
| | | | | | | Corresponding to flashrom svn r1064. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Board enable for Asus A8N-VM CSMMichael Karcher2010-06-271-0/+34
| | | | | | | Corresponding to flashrom svn r1063. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* W83627x code unificationMichael Karcher2010-06-271-57/+153
| | | | | | | | | | | | | This patch unifies the code for different Winbond W83627-family chips, to be applied before I add another W83627 GPIO raise function. After the Ack I added the check for unimplemented GPIO ports, but still dared to reuse the ack. Corresponding to flashrom svn r1062. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Unbreak flashrom - fix compiler errorMichael Karcher2010-06-121-1/+1
| | | | | | | | | Fix compiler error (bad forward port in r1040). Corresponding to flashrom svn r1042. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Board-enable for MS-7025 (K8N Neo2 Platinum)Michael Karcher2010-06-121-0/+10
| | | | | | | | | | | Test report is http://www.coreboot.org/pipermail/flashrom/2010-April/002967.html Corresponding to flashrom svn r1041. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Tested-by: Valentine "Pegasus rider" Yatsenko <mr.qweo@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Board enable for EPIA EK (untested)Michael Karcher2010-06-121-1/+2
| | | | | | | | | | Reporter/owner of that board: oscar <oshikore@gmail.com> http://www.coreboot.org/pipermail/flashrom/2010-April/002910.html Corresponding to flashrom svn r1040. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* board_enable.c: Remove useless 'name' parameterUwe Hermann2010-06-071-64/+61
| | | | | | | | | | | | Every board-enable function is passed a 'const char *name' (board name) which is totally useless as the board name was already printed by flashrom at that point. Also, 95% or so of the board-enables don't use the parameter anyway. So, drop it. Corresponding to flashrom svn r1037. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add hp xw9400 board enableMichael Karcher2010-06-011-8/+42
| | | | | | | | | | | Also modifies nvidia_mcp_gpio_set to cope with multiple MCP55 chips on the same board, like on the Tyan S2915-E. Corresponding to flashrom svn r1025. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Adis Salcin <crow@linux.org.ba> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove unneeded #include statements completelyCarl-Daniel Hailfinger2010-05-301-5/+4
| | | | | | | | | | | | | | | Unistd.h was only used to get a definition of NULL in all files. Add our own NULL #define and remove unistd.h from flash.h stdio.h has no place in flash.h, it should be included only in files which really need it. Add #include statements in individual .c files where needed. Replace a few printf with msg_* to eliminate the need for stdio.h. Corresponding to flashrom svn r1021. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* It seems that this board is actually a 'Pro' versionPeter Lemenkov2010-05-261-1/+1
| | | | | | | | | | | | | At least it's addressed as 'Pro' in the list of boards, which requires board_enable. See also: http://www.flashrom.org/pipermail/flashrom/2009-July/000003.html Corresponding to flashrom svn r1015. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Sort boards in board-enable table alphabeticallyPeter Lemenkov2010-05-261-7/+7
| | | | | | | Corresponding to flashrom svn r1014. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Handle the following architectures in generic flashrom codeCarl-Daniel Hailfinger2010-05-261-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - x86/x86_64 (little endian) - PowerPC (big endian) - MIPS (big+little endian) No changes to programmer specific code. This means any drivers with MMIO access will _not_ suddenly start working on big endian systems, but with this patch everything is in place to fix them. Compilation should work on all architectures listed above for all drivers except nic3com and nicrealtek which require PCI Port IO which is x86-only for now. To compile without nic3com and nicrealtek, run make distclean make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no Thanks to Misha Manulis for testing early versions of this patch on PowerPC (big endian) with the satasii programmer. Thanks to Segher Boessenkool for design review and for helping out with compiler tricks and pointing out that we need eieio on PowerPC. Thanks to Vladimir Serbinenko for compile testing on MIPS (little endian) and PowerPC (big endian) and for runtime testing on MIPS (little endian). Thanks to David Daney for compile testing on MIPS (big endian). Thanks to Uwe Hermann for compile and runtime testing on x86_64. DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH! This patch only provides the infrastructure, but does not convert any drivers, so flashrom will compile, but it won't do the right thing on non-x86 platforms. Corresponding to flashrom svn r1013. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Misha Manulis <misha@manulis.com> Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
* Board enable for IP530Michael Karcher2010-05-241-0/+43
| | | | | | | Corresponding to flashrom svn r1010. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Marc Bertens <mbertens@xs4all.nl>
* Libpci < 2.2.4 can not store class info in struct pci_devCarl-Daniel Hailfinger2010-05-211-2/+4
| | | | | | | | | Read class info manually and store it in a separate variable. Corresponding to flashrom svn r1004. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Convert various prints to use msg_p* and msg_g* respectivelySean Nelson2010-05-071-48/+45
| | | | | | | | | Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel. Corresponding to flashrom svn r997. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add board enable for ABit NF7-SMichael Karcher2010-04-111-0/+9
| | | | | | | | Corresponding to flashrom svn r993. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Tom Brand <worntreads@sbcglobal.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Polish the flashrom code comments and outputs a bitUwe Hermann2010-03-251-24/+24
| | | | | | | | | | | - Fix a number of typos (found via ispell). - Use correct vendor names (as per their websites) consistently. Corresponding to flashrom svn r985. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-23 10:11:00 +0000