diff options
Diffstat (limited to 'flashchips.c')
-rw-r--r-- | flashchips.c | 80 |
1 files changed, 61 insertions, 19 deletions
diff --git a/flashchips.c b/flashchips.c index 4f36e95a..8b5d1ecd 100644 --- a/flashchips.c +++ b/flashchips.c @@ -6803,12 +6803,14 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L8005/MX25L8006E/MX25V8005", + .name = "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L8005, .total_size = 1024, .page_size = 256, + /* MX25L8006E, MX25L8008E support SFDP */ + /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L8006E, MX25L8008E only) */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -6876,13 +6878,13 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L1605A/MX25L1606E", + .name = "MX25L1605A/MX25L1606E/MX25L1608E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1605, .total_size = 2048, .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */ + /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E and MX25L1608E only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -6909,7 +6911,7 @@ const struct flashchip flashchips[] = { .printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) supported (MX25L1608E supports dual-I/O read) */ .voltage = {2700, 3600}, }, @@ -6941,7 +6943,7 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode, for 73E is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ @@ -7084,7 +7086,7 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: CP mode */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ @@ -7093,7 +7095,7 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L3206E", + .name = "MX25L3206E/MX25L3208E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, @@ -7207,14 +7209,14 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L6405(D)", + .name = "MX25L6405", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, - /* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* Has an additional 512B EEPROM sector */ + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7234,22 +7236,22 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 has different meanings */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: error flag */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L6406E/MX25L6436E", + .name = "MX25L6405D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, - /* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */ + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -7270,16 +7272,56 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 for 36E is quad enable */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L6445E/MX25L6465E/MX25L6473E", + .name = "MX25L6406E/MX25L6408E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, + .page_size = 256, + /* MX25L6406E supports SFDP */ + /* OTP: 06E 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, @@ -10126,9 +10168,9 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ + .probe_timing = TIMING_ZERO, .block_erasers = { { |