diff options
Diffstat (limited to 'flashchips.c')
| -rw-r--r-- | flashchips.c | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/flashchips.c b/flashchips.c index e8d86903..47b5dd07 100644 --- a/flashchips.c +++ b/flashchips.c @@ -8484,6 +8484,109 @@ const struct flashchip flashchips[] = { }, { + .vendor = "Spansion", + .name = "S25FL204K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL204, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL208K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL208, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL116K/S25FL216K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL216, + .total_size = 2048, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { .vendor = "SST", .name = "SST25LF040A", .bustype = BUS_SPI, |