diff options
author | Jurij Munda <jurij.munda@uni-mb.si> | 2014-05-14 13:19:50 +0000 |
---|---|---|
committer | Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> | 2014-05-14 13:19:50 +0000 |
commit | a1e5374c894680f6cfad6f2431012f31574f5caa (patch) | |
tree | 06313b45843d186697c32fcd559b29c09329ab7b /flashchips.c | |
parent | a58f6e9b547fd1930a673c526db4476f2ccfaa77 (diff) | |
download | flashrom-a1e5374c894680f6cfad6f2431012f31574f5caa.tar.gz flashrom-a1e5374c894680f6cfad6f2431012f31574f5caa.tar.bz2 flashrom-a1e5374c894680f6cfad6f2431012f31574f5caa.zip |
Add support for Sanyo LE25FU406B
It is very similar to LE25FW418A, except for HD_READ support (that
is not implemented in flashrom anyway yet) and allowed voltage range.
Probing, erasing, reading and writing has been tested.
This chip is found on Seagate Constellation hard drives.
Corresponding to flashrom svn r1791.
Signed-off-by: Jurij Munda <jurij.munda@uni-mb.si>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Diffstat (limited to 'flashchips.c')
-rw-r--r-- | flashchips.c | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/flashchips.c b/flashchips.c index 80593740..f2f04468 100644 --- a/flashchips.c +++ b/flashchips.c @@ -9040,6 +9040,37 @@ const struct flashchip flashchips[] = { { .vendor = "Sanyo", + .name = "LE25FU406B", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FU406B, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "Sanyo", .name = "LE25FW203A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, |