Fix whitespace errors

Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>

15 files changed, 26 insertions, 26 deletions

diff --git a/board_enable.c b/board_enable.c
index 182a4551..a3e45150 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -159,7 +159,7 @@ struct winbond_mux {
 struct winbond_port {
 	const struct winbond_mux *mux; /* NULL or pointer to mux info for the 8 bits */
 	uint8_t ldn;		/* LDN this GPIO register is located in */
-	uint8_t enable_bit;	/* bit in 0x30 of that LDN to enable 
+	uint8_t enable_bit;	/* bit in 0x30 of that LDN to enable
 	                           the GPIO port */
 	uint8_t base;		/* base register in that LDN for the port */
 };
@@ -547,8 +547,8 @@ void w83697xx_memw_enable(uint16_t port)
 		}
 	} else {
 		msg_pinfo("BIOS ROM is disabled\n");
- 	}
- 	w836xx_ext_leave(port);
+	}
+	w836xx_ext_leave(port);
 }
 
 /*
@@ -1036,7 +1036,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise)
 	case 0x0364: /* MCP55 */
 		/* find SMBus controller on *this* southbridge */
 		/* The infamous Tyan S2915-E has two south bridges; they are
-		   easily told apart from each other by the class of the 
+		   easily told apart from each other by the class of the
 		   LPC bridge, but have the same SMBus bridge IDs */
 		if (dev->func != 0) {
 			msg_perr("MCP LPC bridge at unexpected function"
diff --git a/buspirate_spi.c b/buspirate_spi.c
index f8254155..00a4423e 100644
--- a/buspirate_spi.c
+++ b/buspirate_spi.c
@@ -42,7 +42,7 @@ static int buspirate_serialport_setup(char *dev)
 {
 	/* 115200bps, 8 databits, no parity, 1 stopbit */
 	sp_fd = sp_openserport(dev, BP_DEFAULTBAUD);
- 	if (sp_fd == SER_INV_FD)
+	if (sp_fd == SER_INV_FD)
 		return 1;
 	return 0;
 }
diff --git a/cbtable.c b/cbtable.c
index c1c264a9..ea616edb 100644
--- a/cbtable.c
+++ b/cbtable.c
@@ -289,7 +289,7 @@ int cb_parse_table(const char **vendor, const char **model)
 	}
 
 	addr = ((char *)lb_table) - ((char *)table_area) + start;
-	msg_pinfo("coreboot table found at 0x%lx.\n", 
+	msg_pinfo("coreboot table found at 0x%lx.\n",
 		(unsigned long)lb_table - (unsigned long)table_area + start);
 	rec = (struct lb_record *)(((char *)lb_table) + lb_table->header_bytes);
 	last = (struct lb_record *)(((char *)rec) + lb_table->table_bytes);
diff --git a/chipset_enable.c b/chipset_enable.c
index 8243455b..9c88695f 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -1117,7 +1117,7 @@ static int enable_flash_cs5530(struct pci_dev *dev, const char *name)
 
 /*
  * Geode systems write protect the BIOS via RCONFs (cache settings similar
- * to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22. 
+ * to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22.
  *
  * Geode systems also write protect the NOR flash chip itself via MSR_NORF_CTL.
  * To enable write to NOR Boot flash for the benefit of systems that have such
diff --git a/coreboot_tables.h b/coreboot_tables.h
index 2e965267..a5f1586f 100644
--- a/coreboot_tables.h
+++ b/coreboot_tables.h
@@ -29,7 +29,7 @@
  * is expected to be information that cannot be discovered by
  * other means, such as querying the hardware directly.
  *
- * All of the information should be Position Independent Data.  
+ * All of the information should be Position Independent Data.
  * That is it should be safe to relocated any of the information
  * without it's meaning/correctness changing.   For table that
  * can reasonably be used on multiple architectures the data
@@ -52,9 +52,9 @@
  * table entries and be backwards compatible, but it is not required.
  */
 
-/* Since coreboot is usually compiled 32bit, gcc will align 64bit 
- * types to 32bit boundaries. If the coreboot table is dumped on a 
- * 64bit system, a uint64_t would be aligned to 64bit boundaries, 
+/* Since coreboot is usually compiled 32bit, gcc will align 64bit
+ * types to 32bit boundaries. If the coreboot table is dumped on a
+ * 64bit system, a uint64_t would be aligned to 64bit boundaries,
  * breaking the table format.
  *
  * lb_uint64 will keep 64bit coreboot table values aligned to 32bit
diff --git a/dediprog.c b/dediprog.c
index 146b3e7d..c4d5c9dd 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -505,8 +505,8 @@ static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, unsigned
 		if (!transfers[i]) {
 			msg_perr("Allocating libusb transfer %i failed: %s!\n", i, libusb_error_name(ret));
 			goto err_free;
- 		}
- 	}
+		}
+	}
 
 	/* Now transfer requested chunks using libusb's asynchronous interface. */
 	while (!status.error && (status.queued_idx < count)) {
diff --git a/flashchips.c b/flashchips.c
index 70057d49..98a41a9d 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -3068,7 +3068,7 @@ const struct flashchip flashchips[] = {
 			}
 		},
 		.printlock	= printlock_at49f,
- 		.write		= write_jedec_1,
+		.write		= write_jedec_1,
 		.read		= read_memmapped,
 		.voltage	= {4500, 5500},
 	},
@@ -13833,7 +13833,7 @@ const struct flashchip flashchips[] = {
 		.name		= "SST49LF080A",
 		.bustype	= BUS_LPC, /* A/A Mux */
 		.manufacture_id	= SST_ID,
- 		.model_id	= SST_SST49LF080A,
+		.model_id	= SST_SST49LF080A,
 		.total_size	= 1024,
 		.page_size	= 4096,
 		.feature_bits	= FEATURE_EITHER_RESET,
diff --git a/flashchips.h b/flashchips.h
index 68a67faa..c4ea6366 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -592,7 +592,7 @@
 #define PMC_PM49FL002		0x6D
 #define PMC_PM49FL004		0x6E
 
-/* 
+/*
  * The Sanyo chip found so far uses SPI, first byte is manufacture code,
  * second byte is the device code,
  * third byte is a dummy byte.
diff --git a/ichspi.c b/ichspi.c
index 5fe25f61..5abc5f82 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -712,7 +712,7 @@ static void ich_set_bbar(uint32_t min_addr)
 		bbar_off = ICH9_REG_BBAR;
 		break;
 	}
-	
+
 	ichspi_bbar = mmio_readl(ich_spibar + bbar_off) & ~BBAR_MASK;
 	if (ichspi_bbar) {
 		msg_pdbg("Reserved bits in BBAR not zero: 0x%08x\n",
@@ -737,7 +737,7 @@ static void ich_set_bbar(uint32_t min_addr)
  * may even crash.
  */
 static void ich_read_data(uint8_t *data, int len, int reg0_off)
- {
+{
 	int i;
 	uint32_t temp32 = 0;
 
diff --git a/it85spi.c b/it85spi.c
index 1cc87308..fec3af9d 100644
--- a/it85spi.c
+++ b/it85spi.c
@@ -54,7 +54,7 @@
 
 /* The 8042 keyboard controller uses an input buffer and an output buffer to
  * communicate with the host CPU. Both buffers are 1-byte depth. That means
- * IBF is set to 1 when the host CPU sends a command to the input buffer 
+ * IBF is set to 1 when the host CPU sends a command to the input buffer
  * of the EC. IBF is cleared to 0 once the command is read by the EC.
  */
 #define KB_IBF 			(1 << 1)  /* Input Buffer Full */
diff --git a/jedec.c b/jedec.c
index af13876a..bd3af2f7 100644
--- a/jedec.c
+++ b/jedec.c
@@ -68,7 +68,7 @@ void toggle_ready_jedec(const struct flashctx *flash, chipaddr dst)
  * The Winbond W39V040C wants 50 ms between reads on sector erase toggle,
  * but experiments show that 2 ms are already enough. Pick a safety factor
  * of 4 and use an 8 ms delay.
- * Given that erase is slow on all chips, it is recommended to use 
+ * Given that erase is slow on all chips, it is recommended to use
  * toggle_ready_jedec_slow in erase functions.
  */
 static void toggle_ready_jedec_slow(const struct flashctx *flash, chipaddr dst)
diff --git a/nicintel.c b/nicintel.c
index 69b40d34..b2fe82a2 100644
--- a/nicintel.c
+++ b/nicintel.c
@@ -40,7 +40,7 @@ const struct dev_entry nics_intel[] = {
 #define NICINTEL_MEMMAP_SIZE (128 * 1024)
 #define NICINTEL_MEMMAP_MASK (NICINTEL_MEMMAP_SIZE - 1)
 
-#define NICINTEL_CONTROL_MEMMAP_SIZE	0x10 
+#define NICINTEL_CONTROL_MEMMAP_SIZE	0x10
 
 #define CSR_FCR 0x0c
 
diff --git a/pcidev.c b/pcidev.c
index f4e55420..24b7aa1b 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -325,13 +325,13 @@ int rpci_write_byte(struct pci_dev *dev, int reg, uint8_t data)
 	register_undo_pci_write_byte(dev, reg);
 	return pci_write_byte(dev, reg, data);
 }
- 
+
 int rpci_write_word(struct pci_dev *dev, int reg, uint16_t data)
 {
 	register_undo_pci_write_word(dev, reg);
 	return pci_write_word(dev, reg, data);
 }
- 
+
 int rpci_write_long(struct pci_dev *dev, int reg, uint32_t data)
 {
 	register_undo_pci_write_long(dev, reg);
diff --git a/serprog.c b/serprog.c
index 62f28208..c5a35b47 100644
--- a/serprog.c
+++ b/serprog.c
@@ -662,7 +662,7 @@ int serprog_init(void)
 		}
 		msg_pdbg(MSGHEADER "operation buffer size is %d\n",
 			 sp_device_opbuf_size);
-  	}
+	}
 
 	if (sp_check_commandavail(S_CMD_S_PIN_STATE)) {
 		uint8_t en = 1;
diff --git a/udelay.c b/udelay.c
index 3a44c165..e21086b4 100644
--- a/udelay.c
+++ b/udelay.c
@@ -170,7 +170,7 @@ recalibrate:
 	/* Avoid division by zero, but in that case the loop is shot anyway. */
 	if (!timeusec)
 		timeusec = 1;
-	
+
 	/* Compute rounded up number of loops per microsecond. */
 	micro = (count * micro) / timeusec + 1;
 	msg_pdbg("%luM loops per second, ", micro);
@@ -183,7 +183,7 @@ recalibrate:
 		for (i = 0; i < 4; i++) {
 			if (resolution && (resolution < 10)) {
 				timeusec = measure_delay(100);
-			} else if (resolution && 
+			} else if (resolution &&
 				   (resolution < ULONG_MAX / 200)) {
 				timeusec = measure_delay(resolution * 10) *
 					   100 / (resolution * 10);