diff options
Diffstat (limited to 'spartan6/hp_lcd_driver/vram.xco')
| -rw-r--r-- | spartan6/hp_lcd_driver/vram.xco | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/spartan6/hp_lcd_driver/vram.xco b/spartan6/hp_lcd_driver/vram.xco new file mode 100644 index 0000000..f4624c4 --- /dev/null +++ b/spartan6/hp_lcd_driver/vram.xco @@ -0,0 +1,108 @@ +############################################################## +# +# Xilinx Core Generator version 14.7 +# Date: Sat Apr 26 13:15:00 2025 +# +############################################################## +# +# This file contains the customisation parameters for a +# Xilinx CORE Generator IP GUI. It is strongly recommended +# that you do not manually alter this file as it may cause +# unexpected and unsupported behavior. +# +############################################################## +# +# Generated from component: xilinx.com:ip:blk_mem_gen:7.3 +# +############################################################## +# +# BEGIN Project Options +SET addpads = false +SET asysymbol = true +SET busformat = BusFormatAngleBracketNotRipped +SET createndf = false +SET designentry = VHDL +SET device = xc6slx9 +SET devicefamily = spartan6 +SET flowvendor = Other +SET formalverification = false +SET foundationsym = false +SET implementationfiletype = Ngc +SET package = tqg144 +SET removerpms = false +SET simulationfiles = Behavioral +SET speedgrade = -2 +SET verilogsim = false +SET vhdlsim = true +# END Project Options +# BEGIN Select +SELECT Block_Memory_Generator xilinx.com:ip:blk_mem_gen:7.3 +# END Select +# BEGIN Parameters +CSET additional_inputs_for_power_estimation=false +CSET algorithm=Minimum_Area +CSET assume_synchronous_clk=false +CSET axi_id_width=4 +CSET axi_slave_type=Memory_Slave +CSET axi_type=AXI4_Full +CSET byte_size=9 +CSET coe_file=no_coe_file_loaded +CSET collision_warnings=ALL +CSET component_name=vram +CSET disable_collision_warnings=false +CSET disable_out_of_range_warnings=false +CSET ecc=false +CSET ecctype=No_ECC +CSET enable_32bit_address=false +CSET enable_a=Always_Enabled +CSET enable_b=Always_Enabled +CSET error_injection_type=Single_Bit_Error_Injection +CSET fill_remaining_memory_locations=false +CSET interface_type=Native +CSET load_init_file=false +CSET mem_file=no_Mem_file_loaded +CSET memory_type=Simple_Dual_Port_RAM +CSET operating_mode_a=WRITE_FIRST +CSET operating_mode_b=WRITE_FIRST +CSET output_reset_value_a=0 +CSET output_reset_value_b=0 +CSET pipeline_stages=0 +CSET port_a_clock=100 +CSET port_a_enable_rate=100 +CSET port_a_write_rate=50 +CSET port_b_clock=100 +CSET port_b_enable_rate=100 +CSET port_b_write_rate=0 +CSET primitive=8kx2 +CSET read_width_a=2 +CSET read_width_b=2 +CSET register_porta_input_of_softecc=false +CSET register_porta_output_of_memory_core=false +CSET register_porta_output_of_memory_primitives=false +CSET register_portb_output_of_memory_core=false +CSET register_portb_output_of_memory_primitives=false +CSET register_portb_output_of_softecc=false +CSET remaining_memory_locations=0 +CSET reset_memory_latch_a=false +CSET reset_memory_latch_b=false +CSET reset_priority_a=CE +CSET reset_priority_b=CE +CSET reset_type=SYNC +CSET softecc=false +CSET use_axi_id=false +CSET use_bram_block=Stand_Alone +CSET use_byte_write_enable=false +CSET use_error_injection_pins=false +CSET use_regcea_pin=false +CSET use_regceb_pin=false +CSET use_rsta_pin=false +CSET use_rstb_pin=false +CSET write_depth_a=228096 +CSET write_width_a=2 +CSET write_width_b=2 +# END Parameters +# BEGIN Extra information +MISC pkg_timestamp=2012-11-19T16:22:25Z +# END Extra information +GENERATE +# CRC: 74d82cad |